Skip to Content

Wiki source code of Agriculture & Weather Stations

Version 66.2 by Mengting Qiu on 2025/05/07 10:11
Show last authors
1 **Table of Contents:**
2
3 {{toc/}}
4
5
6 = 1. WSS-09 9 in 1 Weather Station Sensor =
7
8 == 1.1 Overview and Spec ==
9
10 Older versions of interfaces  New version of the interface
11
12 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/WSC2-LB_LoRaWAN_Weather_Station_User_Manual/WebHome/image-20240708092247-1.png?rev=1.1||alt="image-20240708092247-1.png"]] [[image:image-20250505190747-1.png||height="275" width="220"]]
13
14 **Power Input**: 10 ~~ 30VDC
15
16 **Max Power Consumption**: 1.2W
17
18 **Wind Speed:**
19
20 * Range: 0~~60m/s
21 * Accuracy: ±(0.2m/s±0.02*v)(v : the wind speed)
22 * Ultrasonic measurement,no start wind strength needed
23
24 **Wind Direction:**
25
26 * Range: 0~~3599
27 * Accuracy: ±3°
28 * Ultrasonic measurement,no start wind strength needed
29 * Built-in electronic compass. No need to consider installation direction
30
31 **Temperature:**
32
33 * Range: -40°C ~~ +80°C
34 * Accuracy: ±0.5°C
35
36 **Humidity:**
37
38 * Range: 0 ~~ 99% RH
39 * Accuracy Tolerance : Typ ±3% RH
40
41 **Air Pressure:**
42
43 * Accuracy: ±0.15kPa@25°C 101kPa
44 * Range: 0~~120kPa
45
46 **Noise:**
47
48 * Range: 30dB~~120dB
49 * Accuracy: ±0.5dB
50
51 **PM2.5:**
52
53 * Range: 0~~1000ug/m3
54 * Accuracy: ±3%FS
55 * Resolution: 1ug/m3
56
57 **PM10:**
58
59 * Range: 0~~1000ug/m3
60 * Accuracy: ±3%FS
61 * Resolution: 1ug/m3
62
63 **llumination:**
64
65 * Range: 0~~200k Lux
66 * Accuracy: ±7%(25 °C)
67
68 == 1.2 Wiring ==
69
70 === 1.2.1 Older version wiring ===
71
72 [[image:image-20240714104450-1.png||height="239" width="445"]]
73
74
75 === 1.2.2 New version wiring ===
76
77 [[image:image-20250505193603-10.png||height="405" width="762"]]
78
79
80 == 1.3 Mechinical Drawing ==
81
82
83 (% class="lead" %)
84 **Device Dimension**
85
86 [[image:image-20240714165651-5.png||height="308" width="245"]]
87
88
89 (% class="lead" %)
90 **Installation**
91
92 * Make sure the device is horizontal installed
93 * Device include electronic compass. No need to consider installation direction to get correct wind direction.
94
95 = 2. WSS-08 Optical Range Guage =
96
97 == 2.1 Overview and Spec ==
98
99
100 Older versions of interfaces  New version of the interface
101
102 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/WSC2-LB_LoRaWAN_Weather_Station_User_Manual/WebHome/image-20240707215336-2.png?width=218&height=159&rev=1.1||alt="image-20240707215336-2.png" height="159" width="218"]] [[image:image-20250505190822-2.png||height="155" width="197"]]
103
104 * Input Power: 9~~30 VDC
105 * Sense diameter: 6cm
106 * Pulse Output, each pulse , 0.1mm
107 * Max rain: 24mm/min
108 * Operation Temperature: -40 ~~ 60 °C
109 * Operation Humidify: 0~~99%RH(no dew)
110
111 == 2.2 Wiring ==
112
113 === 2.2.1 Older version wiring ===
114
115 [[image:image-20241127091433-1.jpeg||height="361" width="517"]]
116
117
118 === 2.2.2 New version wiring ===
119
120
121 [[image:image-20250505193511-9.png||height="392" width="708"]]
122
123 == 2.3 Mechinical Drawing ==
124
125
126 (% class="lead" %)
127 **Device Dimension**
128
129 [[image:image-20240714164433-1.png||height="211" width="548"]]
130
131
132 (% class="lead" %)
133 **Bracket Dimension**
134
135 [[image:image-20240714164803-3.png||height="306" width="836"]]
136
137
138 (% class="lead" %)
139 **Install without Bracket**
140
141 [[image:image-20240714164856-4.png||height="250" width="433"]]
142
143
144 = 3. PAR (Photosynthetically Available Radiation) ~-~-~-~--WSS-27 =
145
146
147 WSS-27 photosynthetically active radiation sensor is mainly used to measure the photosynthetically active radiation of natural light in the wavelength range of 400-700nm.
148
149 WSS-27 use precision optical detectors and has an optical filter of 400-700nm, when natural light is irradiated, a voltage signal proportional to the intensity of the incident radiation is generated, and its luminous flux density is proportional to the cosine of the direct angle of the incident light.
150
151 == 3.1 Specification ==
152
153 [[image:1746411474621-748.png||height="175" width="224"]]
154
155 * Input Power: DC 5 ~~ 24v
156 * Interface: RS485
157 * Response Spectrum: 400~~700nm
158 * Measure range: 0 ~~ 2500μmol/m2•s
159 * Resolution: 1μmol/m2•s
160 * Accuracy: ±2%
161 * Yearly Stability: ≤ ±2%
162 * Working Temperature: -30℃ ~~ 75℃
163 * Working Humidity: 10 ~~ 90%RH
164 * Power Consumption: 3mA @ 12v
165
166 == 3.2 Wiring ==
167
168 [[image:image-20250505193330-8.png||height="393" width="744"]]
169
170 == 3.3 Dimension ==
171
172 [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656057538793-888.png?rev=1.1||alt="1656057538793-888.png"]]
173
174
175 = 4. Total Solar Radiation sensor ~-~- WSS-26 =
176
177 WSS-26 is Total Radiation Sensor can be used to measure the total solar radiation in the spectral range of 0.3 to 3 μm (300 to 3000 nm). If the sensor face is down, the reflected radiation can be measured, and the shading ring can also be used to measure the scattered radiation.
178
179 The core device of the radiation sensor is a high-precision photosensitive element, which has good stability and high precision; at the same time, a precision-machined PTTE radiation cover is installed outside the sensing element, which effectively prevents environmental factors from affecting its performance
180
181 == 4.1 Feature ==
182
183 * RS485 Total Solar Radiation sensor
184 * Measure Total Radiation between 0.3 ~~ 3μm(300 ~~ 3000nm)
185 * Measure Reflected Radiation if sense area towards ground.
186
187 == 4.2 Specification ==
188
189 * (% id="cke_bm_101984S" style="display:none" %)
190 * Input Power: DC 5 ~~ 24v
191 * Interface: RS485
192 * Detect spectrum: 0.3 ~~ 3μm(300～3000nm)
193 * Measure strength range: 0 ~~ 2000W/m2
194 * Resolution: 0.1W/m2
195 * Accuracy: ±3%
196 * Yearly Stability: ≤±2%
197 * Cosine response: ≤7% (@ Sun angle 10°)
198 * Temperature Effect: ±2% (-10℃ ~~ 40℃)
199 * Working Temperature: -40℃ ~~ 70℃
200 * Working Humidity: 10 ~~ 90%RH
201 * Power Consumption: 4mA @ 12v
202
203 == 4.2 Wiring ==
204
205
206 [[image:image-20250505193313-7.png||height="391" width="722"]]
207
208 == 4.3 Device Dimension ==
209
210 [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656057348695-898.png?rev=1.1||alt="1656057348695-898.png"]]
211
212
213 == 4.4 Installation Notice ==
214
215 Do not power on while connect the cables. Double check the wiring before power on.
216
217 [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656057369259-804.png?rev=1.1||alt="1656057369259-804.png"]]
218
219 [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656057377943-564.png?rev=1.1||alt="1656057377943-564.png"]]
220
221
222 = 5. Temperature, Humidity, Illuminance, Pressure ~-~- WSS-25 =
223
224 WSS-25 is a 4 in 1 RS485 sensor which can monitor Temperature, Humidity, Illuminance and Pressure at the same time.
225
226 == 5.1 Feature ==
227
228 * RS485 Temperature, Humidity, Illuminance, Pressure sensor
229
230 == 5.2 Specification ==
231
232
233 * Input Power: DC 12 ~~ 24v
234 * Interface: RS485
235 * Temperature Sensor Spec:
236 ** Range: -30 ~~ 70℃
237 ** resolution 0.1℃
238 ** Accuracy: ±0.5℃
239 * Humidity Sensor Spec:
240 ** Range: 0 ~~ 100% RH
241 ** resolution 0.1 %RH
242 ** Accuracy: 3% RH
243 * Pressure Sensor Spec:
244 ** Range: 10 ~~ 1100hPa
245 ** Resolution: 0.1hPa
246 ** Accuracy: ±0.1hPa
247 * Illuminate sensor:
248 ** Range: 0~~2/20/200kLux
249 ** Resolution: 10 Lux
250 ** Accuracy: ±3%FS
251 * Working Temperature: -30℃ ~~ 70℃
252 * Working Humidity: 10 ~~ 90%RH
253 * Power Consumption: 4mA @ 12v
254
255 == 5.2 Wiring ==
256
257
258 [[image:image-20250505193252-6.png||height="409" width="765"]]
259
260 == 5.3 Dimension ==
261
262
263 [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656057170639-522.png?rev=1.1||alt="1656057170639-522.png"]]
264
265
266 == 5.4 Installation Notice ==
267
268 Do not power on while connect the cables. Double check the wiring before power on.
269
270 [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656057199955-514.png?rev=1.1||alt="1656057199955-514.png"]]
271
272 [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656057212438-475.png?rev=1.1||alt="1656057212438-475.png"]]
273
274
275 = 6. Rain/Snow Detect ~-~- WSS-24 =
276
277 WSS-24 is a RS485 rain / snow detect sensor. It can monitor Rain or Snow event.
278
279 WSS-24 has auto heating feature, this ensures measurement more reliable.
280
281 === 6.1  Feature ===
282
283 * RS485 Rain/Snow detect sensor
284 * Surface heating to dry
285 * grid electrode uses Electroless Nickel/Immersion Gold design for resist corrosion
286
287 === 6.2 Specification ===
288
289 * Detect if there is rain or snow
290 * Input Power: DC 12 ~~ 24v
291 * Interface: RS485
292 * Working Temperature: -30℃ ~~ 70℃
293 * Working Humidity: 10 ~~ 90%RH
294 * Power Consumption:
295 ** No heating: 12mA @ 12v,
296 ** heating: 94ma @ 12v.
297
298 == 6.2 Wiring ==
299
300 [[image:image-20250505193053-5.png]]
301
302 == 6.3 Dimension ==
303
304 [[image:image-20250505144906-15.png]]
305
306
307 == 6.4 Installation Notice ==
308
309 Do not power on while connect the cables. Double check the wiring before power on.
310
311 Install with 15°degree.
312
313 [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656056873783-780.png?rev=1.1||alt="1656056873783-780.png"]]
314
315 [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656056883736-804.png?rev=1.1||alt="1656056883736-804.png"]]
316
317 == 6.5 Heating ==
318
319 WSS-24 supports auto-heat feature. When the temperature is below the heat start temperature 15℃, WSS-04 starts to heat and stop at stop temperature (default is 25℃).
320
321
322 = 7. CO2/PM2.5/PM10 ~-~- WSS-23 =
323
324 WSS-23 is a RS485 Air Quality sensor. It can monitor CO2, PM2.5 and PM10 at the same time.
325
326 WSS-23 uses weather proof shield which can make sure the sensors are well protected against UV & radiation.
327
328 == 7.1 Feature ==
329
330 * RS485 CO2, PM2.5, PM10 sensor
331 * NDIR to measure CO2 with Internal Temperature Compensation
332 * Laser Beam Scattering to PM2.5 and PM10
333
334 == 7.2  Specification ==
335
336 * CO2 Range: 0 ~~ 5000ppm, accuracy: ±3%F•S(25℃)
337 * CO2 resolution: 1ppm
338 * PM2.5/PM10 Range: 0 ~~ 1000μg/m3 , accuracy ±3%F•S(25℃)
339 * PM2.5/PM10 resolution: 1μg/m3
340 * Input Power: DC 7 ~~ 24v
341 * Preheat time: 3min
342 * Interface: RS485
343 * Working Temperature:
344 ** CO2: 0℃ ~~ 50℃;
345 ** PM2.5/PM10: -30 ~~ 50℃
346 * Working Humidity:
347 ** PM2.5/PM10: 15 ~~ 80%RH (no dewing)
348 ** CO2: 0 ~~ 95%RH
349 * Power Consumption: 50mA@ 12v.
350
351 == 7.2 Wiring ==
352
353 [[image:image-20250505193033-4.png||height="376" width="689"]]
354
355 == 7.3 Device Dimension ==
356
357
358 [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656056708366-230.png?rev=1.1||alt="1656056708366-230.png"]]
359
360
361 == 7.4 Installation Notice ==
362
363 Do not power on while connect the cables. Double check the wiring before power on.
364
365 [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656056751153-304.png?rev=1.1||alt="1656056751153-304.png"]]
366
367 [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656056766224-773.png?rev=1.1||alt="1656056766224-773.png"]]
368
369
370 = 8. WSS-22 Integrated wind speed and direction sensor =
371
372 [[image:1746441120854-584.png||height="271" width="394"]]
373
374 WSS-22 is a RS485 wind speed and wind direction monitor designed for weather station solution.
375
376 WSS-22 shell is made of polycarbonate composite material, which has good anti-corrosion and anti-corrosion characteristics, and ensure the long-term use of the sensor without rust. At the same time, it cooperates with the internal smooth bearing system to ensure the stability of information collection
377
378
379 == 8.1 Feature ==
380
381 * RS485 wind speed / direction sensor
382 * PC enclosure, resist corrosion
383
384 == 8.2 Specification ==
385
386 * Wind speed range: 0 ~~ 60m/s
387 * Wind direction range: 0 ~~ 360°
388 * Start wind speed: ≤0.3 m/s
389 * Accuracy: ±(0.3＋0.03V) m/s , ±1°
390 * Input Power: DC 5 ~~ 24v
391 * Interface: RS485
392 * Working Temperature: -30℃ ~~ 70℃
393 * Working Humidity: <100% (no dewing)
394 * Power Consumption: 13mA ~~ 12v.
395 * Cable Length: 2 meters
396
397 == 8.2 Wiring ==
398
399 [[image:image-20250505192929-2.png||height="314" width="590"]]
400
401
402 == 8.3 Device Dimension ==
403
404 (% class="wikigeneratedid" %)
405 [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/image-20220624152813-2.png?rev=1.1||alt="image-20220624152813-2.png"]]
406
407 == 8.4 Angle Mapping ==
408
409 [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656056303845-585.png?rev=1.1||alt="1656056303845-585.png"]]
410
411
412
413 == 8.4 Installation Notice ==
414
415 Do not power on while connect the cables. Double check the wiring before power on.
416
417 The sensor must be installed with below direction, towards North.
418
419 [[image:1746441560175-162.png||height="304" width="484"]]
420
421
422 = 9. Rain Gauge ~-~- WSS-21 =
423
424 WSS-21 RS485 Rain Gauge is used in meteorology and hydrology to gather and measure the amount of liquid precipitation (mainly rainfall) over an area.
425
426 WSS-21 uses a tipping bucket to detect rainfall. The tipping bucket use 3D streamline shape to make sure it works smoothly and is easy to clean.
427
428 The tipping bucket of WSS-01 is adjusted to the best angle. When installation, user only needs to screw up and adjust the bottom horizontally.
429
430 WSS-21 package includes screw which can be installed to ground. If user want to install WSS-21 on pole, they can purchase WS-K2 bracket kit.
431
432 == 9.1 Feature ==
433
434 * RS485 Rain Gauge
435 * Small dimension, easy to install
436 * Vents under funnel, avoid leaf or other things to avoid rain flow.
437 * ABS enclosure.
438 * Horizontal adjustable.
439
440 == 9.2  Specification ==
441
442 * Resolution: 0.2mm
443 * Accuracy: ±3%
444 * Range: 0 ~~ 100mm
445 * Rainfall strength: 0mm ~~ 4mm/min (max 8mm/min)
446 * Input Power: DC 5 ~~ 24v
447 * Interface: RS485
448 * Working Temperature: 0℃ ~~ 70℃ (incorrect below 0 degree, because water become ICE)
449 * Working Humidity: <100% (no dewing)
450 * Power Consumption: 4mA @ 12v.
451
452 == 9.3 Wiring ==
453
454 [[image:image-20250505192952-3.png||height="305" width="581"]]
455
456
457 == 9.3 Dimension ==
458
459
460 [[image:image-20250505184528-20.png||height="468" width="471"]]
461
462 [[image:image-20250505185334-22.png||height="533" width="470"]]
463
464 == 9.4  Installation Notice ==
465
466
467 (((
468 Do not power on while connect the cables. Double check the wiring before power on.
469 )))
470
471 (((
472 Installation Photo as reference:
473 )))
474
475
476 (((
477 (% style="color:#4472c4" %)** Install on Ground:**
478 )))
479
480 (((
481 WSS-21 Rain Gauge include screws so can install in ground directly .
482 )))
483
484
485 (((
486 (% style="color:#4472c4" %)** Install on pole:**
487 )))
488
489 (((
490 If user want to install on pole, they can purchase the (% style="color:#4472c4" %)** WS-K2 :  Bracket Kit for Pole installation**(%%), and install as below:
491
492 [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/image-20220624152218-1.png?width=276&height=526&rev=1.1||alt="image-20220624152218-1.png"]]
493
494 WS-K2: Bracket Kit for Pole installation
495
496 WSSC-K2 dimension document, please see:
497 )))
498
499 [[https:~~/~~/www.dropbox.com/sh/7wa2elfm2q8xq4l/AAB7ZB_gSVGrhmJEgU2LyTQNa?dl=0>>https://www.dropbox.com/sh/7wa2elfm2q8xq4l/AAB7ZB_gSVGrhmJEgU2LyTQNa?dl=0]]