Wiki source code of Agriculture & Weather Stations
Version 65.2 by Mengting Qiu on 2025/05/07 10:07
Show last authors
author | version | line-number | content |
---|---|---|---|
1 | **Table of Contents:** | ||
2 | |||
3 | {{toc/}} | ||
4 | |||
5 | |||
6 | = 1. WSS-09 9 in 1 Weather Station Sensor = | ||
7 | |||
8 | == 1.1 Overview and Spec == | ||
9 | |||
10 | Older versions of interfaces New version of the interface | ||
11 | |||
12 | [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/WSC2-LB_LoRaWAN_Weather_Station_User_Manual/WebHome/image-20240708092247-1.png?rev=1.1||alt="image-20240708092247-1.png"]] [[image:image-20250505190747-1.png||height="275" width="220"]] | ||
13 | |||
14 | **Power Input**: 10 ~~ 30VDC | ||
15 | |||
16 | **Max Power Consumption**: 1.2W | ||
17 | |||
18 | **Wind Speed:** | ||
19 | |||
20 | * Range: 0~~60m/s | ||
21 | * Accuracy: ±(0.2m/s±0.02*v)(v : the wind speed) | ||
22 | * Ultrasonic measurement,no start wind strength needed | ||
23 | |||
24 | **Wind Direction:** | ||
25 | |||
26 | * Range: 0~~3599 | ||
27 | * Accuracy: ±3° | ||
28 | * Ultrasonic measurement,no start wind strength needed | ||
29 | * Built-in electronic compass. No need to consider installation direction | ||
30 | |||
31 | **Temperature:** | ||
32 | |||
33 | * Range: -40°C ~~ +80°C | ||
34 | * Accuracy: ±0.5°C | ||
35 | |||
36 | **Humidity:** | ||
37 | |||
38 | * Range: 0 ~~ 99% RH | ||
39 | * Accuracy Tolerance : Typ ±3% RH | ||
40 | |||
41 | **Air Pressure:** | ||
42 | |||
43 | * Accuracy: ±0.15kPa@25°C 101kPa | ||
44 | * Range: 0~~120kPa | ||
45 | |||
46 | **Noise:** | ||
47 | |||
48 | * Range: 30dB~~120dB | ||
49 | * Accuracy: ±0.5dB | ||
50 | |||
51 | **PM2.5:** | ||
52 | |||
53 | * Range: 0~~1000ug/m3 | ||
54 | * Accuracy: ±3%FS | ||
55 | * Resolution: 1ug/m3 | ||
56 | |||
57 | **PM10:** | ||
58 | |||
59 | * Range: 0~~1000ug/m3 | ||
60 | * Accuracy: ±3%FS | ||
61 | * Resolution: 1ug/m3 | ||
62 | |||
63 | **llumination:** | ||
64 | |||
65 | * Range: 0~~200k Lux | ||
66 | * Accuracy: ±7%(25 °C) | ||
67 | |||
68 | == 1.2 Wiring == | ||
69 | |||
70 | === 1.2.1 Older version wiring === | ||
71 | |||
72 | [[image:image-20240714104450-1.png||height="239" width="445"]] | ||
73 | |||
74 | |||
75 | === 1.2.2 New version wiring === | ||
76 | |||
77 | [[image:image-20250505193603-10.png||height="405" width="762"]] | ||
78 | |||
79 | |||
80 | == 1.3 Mechinical Drawing == | ||
81 | |||
82 | |||
83 | (% class="lead" %) | ||
84 | **Device Dimension** | ||
85 | |||
86 | [[image:image-20240714165651-5.png||height="308" width="245"]] | ||
87 | |||
88 | |||
89 | (% class="lead" %) | ||
90 | **Installation** | ||
91 | |||
92 | * Make sure the device is horizontal installed | ||
93 | * Device include electronic compass. No need to consider installation direction to get correct wind direction. | ||
94 | |||
95 | = 2. WSS-08 Optical Range Guage = | ||
96 | |||
97 | == 2.1 Overview and Spec == | ||
98 | |||
99 | |||
100 | Older versions of interfaces New version of the interface | ||
101 | |||
102 | [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/WSC2-LB_LoRaWAN_Weather_Station_User_Manual/WebHome/image-20240707215336-2.png?width=218&height=159&rev=1.1||alt="image-20240707215336-2.png" height="159" width="218"]] [[image:image-20250505190822-2.png||height="155" width="197"]] | ||
103 | |||
104 | * Input Power: 9~~30 VDC | ||
105 | * Sense diameter: 6cm | ||
106 | * Pulse Output, each pulse , 0.1mm | ||
107 | * Max rain: 24mm/min | ||
108 | * Operation Temperature: -40 ~~ 60 °C | ||
109 | * Operation Humidify: 0~~99%RH(no dew) | ||
110 | |||
111 | == 2.2 Wiring == | ||
112 | |||
113 | === 2.2.1 Older version wiring === | ||
114 | |||
115 | [[image:image-20241127091433-1.jpeg||height="361" width="517"]] | ||
116 | |||
117 | |||
118 | === 2.2.2 New version wiring === | ||
119 | |||
120 | |||
121 | [[image:image-20250505193511-9.png||height="392" width="708"]] | ||
122 | |||
123 | == 2.3 Mechinical Drawing == | ||
124 | |||
125 | |||
126 | (% class="lead" %) | ||
127 | **Device Dimension** | ||
128 | |||
129 | [[image:image-20240714164433-1.png||height="211" width="548"]] | ||
130 | |||
131 | |||
132 | (% class="lead" %) | ||
133 | **Bracket Dimension** | ||
134 | |||
135 | [[image:image-20240714164803-3.png||height="306" width="836"]] | ||
136 | |||
137 | |||
138 | (% class="lead" %) | ||
139 | **Install without Bracket** | ||
140 | |||
141 | [[image:image-20240714164856-4.png||height="250" width="433"]] | ||
142 | |||
143 | |||
144 | = 3. PAR (Photosynthetically Available Radiation) ~-~-~-~--WSS-27 = | ||
145 | |||
146 | |||
147 | WSS-27 photosynthetically active radiation sensor is mainly used to measure the photosynthetically active radiation of natural light in the wavelength range of 400-700nm. | ||
148 | |||
149 | WSS-27 use precision optical detectors and has an optical filter of 400-700nm, when natural light is irradiated, a voltage signal proportional to the intensity of the incident radiation is generated, and its luminous flux density is proportional to the cosine of the direct angle of the incident light. | ||
150 | |||
151 | == 3.1 Specification == | ||
152 | |||
153 | [[image:1746411474621-748.png||height="175" width="224"]] | ||
154 | |||
155 | * Input Power: DC 5 ~~ 24v | ||
156 | * Interface: RS485 | ||
157 | * Response Spectrum: 400~~700nm | ||
158 | * Measure range: 0 ~~ 2500μmol/m2•s | ||
159 | * Resolution: 1μmol/m2•s | ||
160 | * Accuracy: ±2% | ||
161 | * Yearly Stability: ≤ ±2% | ||
162 | * Working Temperature: -30℃ ~~ 75℃ | ||
163 | * Working Humidity: 10 ~~ 90%RH | ||
164 | * Power Consumption: 3mA @ 12v | ||
165 | |||
166 | == 3.2 Wiring == | ||
167 | |||
168 | [[image:image-20250505193330-8.png||height="393" width="744"]] | ||
169 | |||
170 | == 3.3 Dimension == | ||
171 | |||
172 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656057538793-888.png?rev=1.1||alt="1656057538793-888.png"]] | ||
173 | |||
174 | |||
175 | = 4. Total Solar Radiation sensor ~-~- WSS-26 = | ||
176 | |||
177 | WSS-26 is Total Radiation Sensor can be used to measure the total solar radiation in the spectral range of 0.3 to 3 μm (300 to 3000 nm). If the sensor face is down, the reflected radiation can be measured, and the shading ring can also be used to measure the scattered radiation. | ||
178 | |||
179 | The core device of the radiation sensor is a high-precision photosensitive element, which has good stability and high precision; at the same time, a precision-machined PTTE radiation cover is installed outside the sensing element, which effectively prevents environmental factors from affecting its performance | ||
180 | |||
181 | == 4.1 Feature == | ||
182 | |||
183 | * RS485 Total Solar Radiation sensor | ||
184 | * Measure Total Radiation between 0.3 ~~ 3μm(300 ~~ 3000nm) | ||
185 | * Measure Reflected Radiation if sense area towards ground. | ||
186 | |||
187 | == 4.2 Specification == | ||
188 | |||
189 | * (% id="cke_bm_101984S" style="display:none" %) | ||
190 | * Input Power: DC 5 ~~ 24v | ||
191 | * Interface: RS485 | ||
192 | * Detect spectrum: 0.3 ~~ 3μm(300~3000nm) | ||
193 | * Measure strength range: 0 ~~ 2000W/m2 | ||
194 | * Resolution: 0.1W/m2 | ||
195 | * Accuracy: ±3% | ||
196 | * Yearly Stability: ≤±2% | ||
197 | * Cosine response: ≤7% (@ Sun angle 10°) | ||
198 | * Temperature Effect: ±2% (-10℃ ~~ 40℃) | ||
199 | * Working Temperature: -40℃ ~~ 70℃ | ||
200 | * Working Humidity: 10 ~~ 90%RH | ||
201 | * Power Consumption: 4mA @ 12v | ||
202 | |||
203 | == 4.2 Wiring == | ||
204 | |||
205 | |||
206 | [[image:image-20250505193313-7.png||height="391" width="722"]] | ||
207 | |||
208 | == 4.3 Device Dimension == | ||
209 | |||
210 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656057348695-898.png?rev=1.1||alt="1656057348695-898.png"]] | ||
211 | |||
212 | |||
213 | == 4.4 Installation Notice == | ||
214 | |||
215 | Do not power on while connect the cables. Double check the wiring before power on. | ||
216 | |||
217 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656057369259-804.png?rev=1.1||alt="1656057369259-804.png"]] | ||
218 | |||
219 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656057377943-564.png?rev=1.1||alt="1656057377943-564.png"]] | ||
220 | |||
221 | |||
222 | = 5. Temperature, Humidity, Illuminance, Pressure ~-~- WSS-25 = | ||
223 | |||
224 | WSS-25 is a 4 in 1 RS485 sensor which can monitor Temperature, Humidity, Illuminance and Pressure at the same time. | ||
225 | |||
226 | == 5.1 Feature == | ||
227 | |||
228 | * RS485 Temperature, Humidity, Illuminance, Pressure sensor | ||
229 | |||
230 | == 5.2 Specification == | ||
231 | |||
232 | |||
233 | * Input Power: DC 12 ~~ 24v | ||
234 | * Interface: RS485 | ||
235 | * Temperature Sensor Spec: | ||
236 | ** Range: -30 ~~ 70℃ | ||
237 | ** resolution 0.1℃ | ||
238 | ** Accuracy: ±0.5℃ | ||
239 | * Humidity Sensor Spec: | ||
240 | ** Range: 0 ~~ 100% RH | ||
241 | ** resolution 0.1 %RH | ||
242 | ** Accuracy: 3% RH | ||
243 | * Pressure Sensor Spec: | ||
244 | ** Range: 10 ~~ 1100hPa | ||
245 | ** Resolution: 0.1hPa | ||
246 | ** Accuracy: ±0.1hPa | ||
247 | * Illuminate sensor: | ||
248 | ** Range: 0~~2/20/200kLux | ||
249 | ** Resolution: 10 Lux | ||
250 | ** Accuracy: ±3%FS | ||
251 | * Working Temperature: -30℃ ~~ 70℃ | ||
252 | * Working Humidity: 10 ~~ 90%RH | ||
253 | * Power Consumption: 4mA @ 12v | ||
254 | |||
255 | == 5.2 Wiring == | ||
256 | |||
257 | |||
258 | [[image:image-20250505193252-6.png||height="409" width="765"]] | ||
259 | |||
260 | == 5.3 Dimension == | ||
261 | |||
262 | |||
263 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656057170639-522.png?rev=1.1||alt="1656057170639-522.png"]] | ||
264 | |||
265 | |||
266 | = 6. Rain/Snow Detect ~-~- WSS-24 = | ||
267 | |||
268 | WSS-24 is a RS485 rain / snow detect sensor. It can monitor Rain or Snow event. | ||
269 | |||
270 | WSS-24 has auto heating feature, this ensures measurement more reliable. | ||
271 | |||
272 | === 6.1 Feature === | ||
273 | |||
274 | * RS485 Rain/Snow detect sensor | ||
275 | * Surface heating to dry | ||
276 | * grid electrode uses Electroless Nickel/Immersion Gold design for resist corrosion | ||
277 | |||
278 | === 6.2 Specification === | ||
279 | |||
280 | * Detect if there is rain or snow | ||
281 | * Input Power: DC 12 ~~ 24v | ||
282 | * Interface: RS485 | ||
283 | * Working Temperature: -30℃ ~~ 70℃ | ||
284 | * Working Humidity: 10 ~~ 90%RH | ||
285 | * Power Consumption: | ||
286 | ** No heating: 12mA @ 12v, | ||
287 | ** heating: 94ma @ 12v. | ||
288 | |||
289 | == 6.2 Wiring == | ||
290 | |||
291 | [[image:image-20250505193053-5.png]] | ||
292 | |||
293 | == 6.3 Dimension == | ||
294 | |||
295 | [[image:image-20250505144906-15.png]] | ||
296 | |||
297 | |||
298 | == 6.4 Installation Notice == | ||
299 | |||
300 | Do not power on while connect the cables. Double check the wiring before power on. | ||
301 | |||
302 | Install with 15°degree. | ||
303 | |||
304 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656056873783-780.png?rev=1.1||alt="1656056873783-780.png"]] | ||
305 | |||
306 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656056883736-804.png?rev=1.1||alt="1656056883736-804.png"]] | ||
307 | |||
308 | |||
309 | = 7. CO2/PM2.5/PM10 ~-~- WSS-23 = | ||
310 | |||
311 | WSS-23 is a RS485 Air Quality sensor. It can monitor CO2, PM2.5 and PM10 at the same time. | ||
312 | |||
313 | WSS-23 uses weather proof shield which can make sure the sensors are well protected against UV & radiation. | ||
314 | |||
315 | == 7.1 Feature == | ||
316 | |||
317 | * RS485 CO2, PM2.5, PM10 sensor | ||
318 | * NDIR to measure CO2 with Internal Temperature Compensation | ||
319 | * Laser Beam Scattering to PM2.5 and PM10 | ||
320 | |||
321 | == 7.2 Specification == | ||
322 | |||
323 | * CO2 Range: 0 ~~ 5000ppm, accuracy: ±3%F•S(25℃) | ||
324 | * CO2 resolution: 1ppm | ||
325 | * PM2.5/PM10 Range: 0 ~~ 1000μg/m3 , accuracy ±3%F•S(25℃) | ||
326 | * PM2.5/PM10 resolution: 1μg/m3 | ||
327 | * Input Power: DC 7 ~~ 24v | ||
328 | * Preheat time: 3min | ||
329 | * Interface: RS485 | ||
330 | * Working Temperature: | ||
331 | ** CO2: 0℃ ~~ 50℃; | ||
332 | ** PM2.5/PM10: -30 ~~ 50℃ | ||
333 | * Working Humidity: | ||
334 | ** PM2.5/PM10: 15 ~~ 80%RH (no dewing) | ||
335 | ** CO2: 0 ~~ 95%RH | ||
336 | * Power Consumption: 50mA@ 12v. | ||
337 | |||
338 | == 7.2 Wiring == | ||
339 | |||
340 | [[image:image-20250505193033-4.png||height="376" width="689"]] | ||
341 | |||
342 | == 7.3 Device Dimension == | ||
343 | |||
344 | |||
345 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656056708366-230.png?rev=1.1||alt="1656056708366-230.png"]] | ||
346 | |||
347 | |||
348 | == 7.4 Installation Notice == | ||
349 | |||
350 | Do not power on while connect the cables. Double check the wiring before power on. | ||
351 | |||
352 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656056751153-304.png?rev=1.1||alt="1656056751153-304.png"]] | ||
353 | |||
354 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656056766224-773.png?rev=1.1||alt="1656056766224-773.png"]] | ||
355 | |||
356 | |||
357 | = 8. WSS-22 Integrated wind speed and direction sensor = | ||
358 | |||
359 | [[image:1746441120854-584.png||height="271" width="394"]] | ||
360 | |||
361 | WSS-22 is a RS485 wind speed and wind direction monitor designed for weather station solution. | ||
362 | |||
363 | WSS-22 shell is made of polycarbonate composite material, which has good anti-corrosion and anti-corrosion characteristics, and ensure the long-term use of the sensor without rust. At the same time, it cooperates with the internal smooth bearing system to ensure the stability of information collection | ||
364 | |||
365 | |||
366 | == 8.1 Feature == | ||
367 | |||
368 | * RS485 wind speed / direction sensor | ||
369 | * PC enclosure, resist corrosion | ||
370 | |||
371 | == 8.2 Specification == | ||
372 | |||
373 | * Wind speed range: 0 ~~ 60m/s | ||
374 | * Wind direction range: 0 ~~ 360° | ||
375 | * Start wind speed: ≤0.3 m/s | ||
376 | * Accuracy: ±(0.3+0.03V) m/s , ±1° | ||
377 | * Input Power: DC 5 ~~ 24v | ||
378 | * Interface: RS485 | ||
379 | * Working Temperature: -30℃ ~~ 70℃ | ||
380 | * Working Humidity: <100% (no dewing) | ||
381 | * Power Consumption: 13mA ~~ 12v. | ||
382 | * Cable Length: 2 meters | ||
383 | |||
384 | == 8.2 Wiring == | ||
385 | |||
386 | [[image:image-20250505192929-2.png||height="314" width="590"]] | ||
387 | |||
388 | |||
389 | == 8.3 Device Dimension == | ||
390 | |||
391 | (% class="wikigeneratedid" %) | ||
392 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/image-20220624152813-2.png?rev=1.1||alt="image-20220624152813-2.png"]] | ||
393 | |||
394 | == 8.4 Angle Mapping == | ||
395 | |||
396 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656056303845-585.png?rev=1.1||alt="1656056303845-585.png"]] | ||
397 | |||
398 | |||
399 | |||
400 | == 8.4 Installation Notice == | ||
401 | |||
402 | Do not power on while connect the cables. Double check the wiring before power on. | ||
403 | |||
404 | The sensor must be installed with below direction, towards North. | ||
405 | |||
406 | [[image:1746441560175-162.png||height="304" width="484"]] | ||
407 | |||
408 | |||
409 | = 9. Rain Gauge ~-~- WSS-21 = | ||
410 | |||
411 | WSS-21 RS485 Rain Gauge is used in meteorology and hydrology to gather and measure the amount of liquid precipitation (mainly rainfall) over an area. | ||
412 | |||
413 | WSS-21 uses a tipping bucket to detect rainfall. The tipping bucket use 3D streamline shape to make sure it works smoothly and is easy to clean. | ||
414 | |||
415 | The tipping bucket of WSS-01 is adjusted to the best angle. When installation, user only needs to screw up and adjust the bottom horizontally. | ||
416 | |||
417 | WSS-21 package includes screw which can be installed to ground. If user want to install WSS-21 on pole, they can purchase WS-K2 bracket kit. | ||
418 | |||
419 | == 9.1 Feature == | ||
420 | |||
421 | * RS485 Rain Gauge | ||
422 | * Small dimension, easy to install | ||
423 | * Vents under funnel, avoid leaf or other things to avoid rain flow. | ||
424 | * ABS enclosure. | ||
425 | * Horizontal adjustable. | ||
426 | |||
427 | == 9.2 Specification == | ||
428 | |||
429 | * Resolution: 0.2mm | ||
430 | * Accuracy: ±3% | ||
431 | * Range: 0 ~~ 100mm | ||
432 | * Rainfall strength: 0mm ~~ 4mm/min (max 8mm/min) | ||
433 | * Input Power: DC 5 ~~ 24v | ||
434 | * Interface: RS485 | ||
435 | * Working Temperature: 0℃ ~~ 70℃ (incorrect below 0 degree, because water become ICE) | ||
436 | * Working Humidity: <100% (no dewing) | ||
437 | * Power Consumption: 4mA @ 12v. | ||
438 | |||
439 | == 9.3 Wiring == | ||
440 | |||
441 | [[image:image-20250505192952-3.png||height="305" width="581"]] | ||
442 | |||
443 | |||
444 | == 9.3 Dimension == | ||
445 | |||
446 | |||
447 | [[image:image-20250505184528-20.png||height="468" width="471"]] | ||
448 | |||
449 | [[image:image-20250505185334-22.png||height="533" width="470"]] | ||
450 | |||
451 | == 9.4 Installation Notice == | ||
452 | |||
453 | |||
454 | ((( | ||
455 | Do not power on while connect the cables. Double check the wiring before power on. | ||
456 | ))) | ||
457 | |||
458 | ((( | ||
459 | Installation Photo as reference: | ||
460 | ))) | ||
461 | |||
462 | |||
463 | ((( | ||
464 | (% style="color:#4472c4" %)** Install on Ground:** | ||
465 | ))) | ||
466 | |||
467 | ((( | ||
468 | WSS-21 Rain Gauge include screws so can install in ground directly . | ||
469 | ))) | ||
470 | |||
471 | |||
472 | ((( | ||
473 | (% style="color:#4472c4" %)** Install on pole:** | ||
474 | ))) | ||
475 | |||
476 | ((( | ||
477 | If user want to install on pole, they can purchase the (% style="color:#4472c4" %)** WS-K2 : Bracket Kit for Pole installation**(%%), and install as below: | ||
478 | |||
479 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/image-20220624152218-1.png?width=276&height=526&rev=1.1||alt="image-20220624152218-1.png"]] | ||
480 | |||
481 | WS-K2: Bracket Kit for Pole installation | ||
482 | |||
483 | WSSC-K2 dimension document, please see: | ||
484 | ))) | ||
485 | |||
486 | [[https:~~/~~/www.dropbox.com/sh/7wa2elfm2q8xq4l/AAB7ZB_gSVGrhmJEgU2LyTQNa?dl=0>>https://www.dropbox.com/sh/7wa2elfm2q8xq4l/AAB7ZB_gSVGrhmJEgU2LyTQNa?dl=0]] |