Changes for page

Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -254,29 +254,19 @@
254	254
255	255	**Steps:**
256	256
257		-**~1. Calculate the K-value ratio**:
	257	+if the value of sensor 1 is 1500 and the value of sensor 2 is 2000, it is necessary to keep the values around 1500if the value of sensor 1 is 1500 and the value of sensor 2 is 2000, it is necessary to keep the values around 1500.
258	258
259		-Ratio=Desired Value/Current Value=1500/2000=0.75
	259	+Modify the K value of sensor 2:
260	260
261		-Multiply by the default K-value (1000) to get the new K-value: 0.75×1000=750(Decimal)
	261	+* K value calculation as follows:
	262	+* 1500/2000=0.75,  0.75*1000=750
	263	+* Convert 750 to hexadecimal to 02EE.
	264	+* Send command to sensor 2
	265	+* Send：0B 06 00 53 02 EE F8 5D  Send successfully and return this command
262	262
263		-**2. Convert the (% style="color:#037691" %)new K-value(%%) to hexadecimal**:
264	264
265		-* 750(D) = 0x02EE(H)
266	266
267		-**3. Send the calibration command to Sensor 2**:
268	268
269		-* Command Format: **0B 06 00 53 [(% style="color:#037691" %)K-value(%%) (2 bytes)] [CRC]**
270		-
271		-Example for K-value 0x02EE: 0B 06 00 53 02 EE F8 5D
272		-
273		-Notes:
274		-Always use the sensor with the most trusted reading as the reference (do not modify its K-value).
275		-The default K-value 03E8 (1000) implies no scaling. Values below 03E8 reduce the output; values above increase it.
276		-CRC is auto-generated by the tool (no manual calculation needed).
277		-
278		-
279		-
280	280	= 5. WSS-25 ~-~- Temperature, Humidity, Illuminance, Pressure =
281	281
282	282