Version 81.5 by Mengting Qiu on 2025/07/01 13:55
Show last authors
| author | version | line-number | content |
|---|---|---|---|
| 1 | **Table of Contents:** | ||
| 2 | |||
| 3 | {{toc/}} | ||
| 4 | |||
| 5 | |||
| 6 | = 1. WSS-09 ~-~- 9 in 1 Weather Station Sensor = | ||
| 7 | |||
| 8 | == 1.1 Overview and Spec == | ||
| 9 | |||
| 10 | |||
| 11 | **Older versions of interfaces New version of the interface** | ||
| 12 | |||
| 13 | [[image:image-20250507141942-2.jpeg]] [[image:image-20250507141229-1.png||height="265" width="205"]] | ||
| 14 | |||
| 15 | **Power Input**: 10 ~~ 30VDC | ||
| 16 | |||
| 17 | **Max Power Consumption**: 1.2W | ||
| 18 | |||
| 19 | **Wind Speed:** | ||
| 20 | |||
| 21 | * Range: 0~~60m/s | ||
| 22 | * Accuracy: ±(0.2m/s±0.02*v)(v : the wind speed) | ||
| 23 | * Ultrasonic measurement,no start wind strength needed | ||
| 24 | |||
| 25 | **Wind Direction:** | ||
| 26 | |||
| 27 | * Range: 0~~3599 | ||
| 28 | * Accuracy: ±3° | ||
| 29 | * Ultrasonic measurement, no start wind strength needed | ||
| 30 | * Built-in electronic compass. No need to consider installation direction | ||
| 31 | |||
| 32 | **Temperature:** | ||
| 33 | |||
| 34 | * Range: -40°C ~~ +80°C | ||
| 35 | * Accuracy: ±0.5°C | ||
| 36 | |||
| 37 | **Humidity:** | ||
| 38 | |||
| 39 | * Range: 0 ~~ 99% RH | ||
| 40 | * Accuracy Tolerance : Typ ±3% RH | ||
| 41 | |||
| 42 | **Air Pressure:** | ||
| 43 | |||
| 44 | * Accuracy: ±0.15kPa@25°C 101kPa | ||
| 45 | * Range: 0~~120kPa | ||
| 46 | |||
| 47 | **Noise:** | ||
| 48 | |||
| 49 | * Range: 30dB~~120dB | ||
| 50 | * Accuracy: ±0.5dB | ||
| 51 | |||
| 52 | **PM2.5:** | ||
| 53 | |||
| 54 | * Range: 0~~1000ug/m3 | ||
| 55 | * Accuracy: ±3%FS | ||
| 56 | * Resolution: 1ug/m3 | ||
| 57 | |||
| 58 | **PM10:** | ||
| 59 | |||
| 60 | * Range: 0~~1000ug/m3 | ||
| 61 | * Accuracy: ±3%FS | ||
| 62 | * Resolution: 1ug/m3 | ||
| 63 | |||
| 64 | **llumination:** | ||
| 65 | |||
| 66 | * Range: 0~~200k Lux | ||
| 67 | * Accuracy: ±7%(25 °C) | ||
| 68 | |||
| 69 | == 1.2 Wiring == | ||
| 70 | |||
| 71 | === 1.2.1 Older version wiring === | ||
| 72 | |||
| 73 | [[image:image-20240714104450-1.png||height="239" width="445"]] | ||
| 74 | |||
| 75 | |||
| 76 | === 1.2.2 New version wiring === | ||
| 77 | |||
| 78 | [[image:image-20250507161616-1.png||height="363" width="682"]] | ||
| 79 | |||
| 80 | |||
| 81 | == 1.3 Mechinical Drawing == | ||
| 82 | |||
| 83 | |||
| 84 | (% class="lead" %) | ||
| 85 | **Device Dimension** | ||
| 86 | |||
| 87 | [[image:image-20240714165651-5.png||height="308" width="245"]] | ||
| 88 | |||
| 89 | |||
| 90 | (% class="lead" %) | ||
| 91 | **Installation** | ||
| 92 | |||
| 93 | * Make sure the device is horizontal installed | ||
| 94 | * Device include electronic compass. No need to consider installation direction to get correct wind direction. | ||
| 95 | |||
| 96 | = 2. WSS-08 ~-~- Optical Range Guage = | ||
| 97 | |||
| 98 | == 2.1 Overview and Spec == | ||
| 99 | |||
| 100 | |||
| 101 | **Older versions of interfaces New version of the interface** | ||
| 102 | |||
| 103 | [[image:image-20250507142027-3.jpeg]] [[image:image-20250505190822-2.png||height="155" width="197"]] | ||
| 104 | |||
| 105 | * Input Power: 9~~30 VDC | ||
| 106 | * Sense diameter: 6cm | ||
| 107 | * Pulse Output, each pulse , 0.1mm | ||
| 108 | * Max rain: 24mm/min | ||
| 109 | * Operation Temperature: -40 ~~ 60 °C | ||
| 110 | * Operation Humidify: 0~~99%RH(no dew) | ||
| 111 | |||
| 112 | == 2.2 Wiring == | ||
| 113 | |||
| 114 | === 2.2.1 Older version wiring === | ||
| 115 | |||
| 116 | [[image:image-20241127091433-1.jpeg||height="361" width="517"]] | ||
| 117 | |||
| 118 | |||
| 119 | === 2.2.2 New version wiring === | ||
| 120 | |||
| 121 | |||
| 122 | [[image:image-20250505193511-9.png||height="392" width="708"]] | ||
| 123 | |||
| 124 | == 2.3 Mechinical Drawing == | ||
| 125 | |||
| 126 | |||
| 127 | (% class="lead" %) | ||
| 128 | **Device Dimension** | ||
| 129 | |||
| 130 | [[image:image-20240714164433-1.png||height="211" width="548"]] | ||
| 131 | |||
| 132 | |||
| 133 | (% class="lead" %) | ||
| 134 | **Bracket Dimension** | ||
| 135 | |||
| 136 | [[image:image-20240714164803-3.png||height="306" width="836"]] | ||
| 137 | |||
| 138 | |||
| 139 | (% class="lead" %) | ||
| 140 | **Install without Bracket** | ||
| 141 | |||
| 142 | [[image:image-20240714164856-4.png||height="250" width="433"]] | ||
| 143 | |||
| 144 | |||
| 145 | = 3. WSS-27 ~-~- PAR (Photosynthetically Available Radiation) = | ||
| 146 | |||
| 147 | |||
| 148 | WSS-27 photosynthetically active radiation sensor is mainly used to measure the photosynthetically active radiation of natural light in the wavelength range of 400-700nm. | ||
| 149 | |||
| 150 | WSS-27 use precision optical detectors and has an optical filter of 400-700nm, when natural light is irradiated, a voltage signal proportional to the intensity of the incident radiation is generated, and its luminous flux density is proportional to the cosine of the direct angle of the incident light. | ||
| 151 | |||
| 152 | |||
| 153 | == 3.1 Specification == | ||
| 154 | |||
| 155 | [[image:1746411474621-748.png||height="175" width="224"]] | ||
| 156 | |||
| 157 | * Input Power: DC 5 ~~ 24v | ||
| 158 | * Interface: RS485 | ||
| 159 | * Response Spectrum: 400~~700nm | ||
| 160 | * Measure range: 0 ~~ 2500μmol/m2•s | ||
| 161 | * Resolution: 1μmol/m2•s | ||
| 162 | * Accuracy: ±2% | ||
| 163 | * Yearly Stability: ≤ ±2% | ||
| 164 | * Working Temperature: -30℃ ~~ 75℃ | ||
| 165 | * Working Humidity: 10 ~~ 90%RH | ||
| 166 | * Power Consumption: 5mA @ 12v & 6mA @ 5v | ||
| 167 | * Stable Time: 5s | ||
| 168 | |||
| 169 | == 3.2 Wiring == | ||
| 170 | |||
| 171 | [[image:image-20250505193330-8.png||height="393" width="744"]] | ||
| 172 | |||
| 173 | == 3.3 Dimension == | ||
| 174 | |||
| 175 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656057538793-888.png?rev=1.1||alt="1656057538793-888.png"]] | ||
| 176 | |||
| 177 | == 3.4 Installation Notice == | ||
| 178 | |||
| 179 | |||
| 180 | Do not power on while connect the cables. Double check the wiring before power on. | ||
| 181 | |||
| 182 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656057557191-895.png?rev=1.1||alt="1656057557191-895.png"]] | ||
| 183 | |||
| 184 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656057565783-251.png?rev=1.1||alt="1656057565783-251.png"]] | ||
| 185 | |||
| 186 | |||
| 187 | = 4. WSS-26 ~-~- Total Solar Radiation sensor = | ||
| 188 | |||
| 189 | |||
| 190 | WSS-26 is Total Radiation Sensor can be used to measure the total solar radiation in the spectral range of 0.3 to 3 μm (300 to 3000 nm). If the sensor face is down, the reflected radiation can be measured, and the shading ring can also be used to measure the scattered radiation. | ||
| 191 | |||
| 192 | The core device of the radiation sensor is a high-precision photosensitive element, which has good stability and high precision; at the same time, a precision-machined PTTE radiation cover is installed outside the sensing element, which effectively prevents environmental factors from affecting its performance. | ||
| 193 | |||
| 194 | |||
| 195 | == 4.1 Feature == | ||
| 196 | |||
| 197 | |||
| 198 | * RS485 Total Solar Radiation sensor | ||
| 199 | * Measure Total Radiation between 0.3 ~~ 3μm(300 ~~ 3000nm) | ||
| 200 | * Measure Reflected Radiation if sense area towards ground. | ||
| 201 | |||
| 202 | == 4.2 Specification == | ||
| 203 | |||
| 204 | |||
| 205 | (% id="cke_bm_101984S" style="display:none" %) | ||
| 206 | |||
| 207 | * Input Power: DC 5 ~~ 24v | ||
| 208 | * Interface: RS485 | ||
| 209 | * Detect spectrum: 0.3 ~~ 3μm(300～3000nm) | ||
| 210 | * Measure strength range: 0 ~~ 2000W/m2 | ||
| 211 | * Resolution: 0.1W/m2 | ||
| 212 | * Accuracy: ±3% | ||
| 213 | * Yearly Stability: ≤±2% | ||
| 214 | * Cosine response: ≤7% (@ Sun angle 10°) | ||
| 215 | * Temperature Effect: ±2% (-10℃ ~~ 40℃) | ||
| 216 | * Working Temperature: -40℃ ~~ 70℃ | ||
| 217 | * Working Humidity: 10 ~~ 90%RH | ||
| 218 | * Power Consumption: 4mA @ 12v | ||
| 219 | |||
| 220 | == 4.3 Wiring == | ||
| 221 | |||
| 222 | |||
| 223 | [[image:image-20250505193313-7.png||height="391" width="722"]] | ||
| 224 | |||
| 225 | == 4.4 Device Dimension == | ||
| 226 | |||
| 227 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656057348695-898.png?rev=1.1||alt="1656057348695-898.png"]] | ||
| 228 | |||
| 229 | |||
| 230 | == 4.5 Installation Notice == | ||
| 231 | |||
| 232 | |||
| 233 | Do not power on while connect the cables. Double check the wiring before power on. | ||
| 234 | |||
| 235 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656057369259-804.png?rev=1.1||alt="1656057369259-804.png"]] | ||
| 236 | |||
| 237 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656057377943-564.png?rev=1.1||alt="1656057377943-564.png"]] | ||
| 238 | |||
| 239 | |||
| 240 | == 4.6 Calibration Values (K-value Adjustment) == | ||
| 241 | |||
| 242 | In the event of deviations in the sensor values, calibration can be carried out by modifying the sensor's internal parameter: K-value parameter(**Default: 03E8(H)=1000(D)**). | ||
| 243 | |||
| 244 | **Calibration Principle** | ||
| 245 | |||
| 246 | The K-value scales the sensor's output. If multiple sensors measure the same parameter but show different values, adjust the K-value of the secondary sensor(s) to match the primary sensor's reading. | ||
| 247 | |||
| 248 | **Step-by-Step Example:** | ||
| 249 | |||
| 250 | Scenario: | ||
| 251 | |||
| 252 | * Sensor 1 (reference) reads 1500. | ||
| 253 | * Sensor 2 reads 2000, but should match Sensor 1's value (~~1500). | ||
| 254 | |||
| 255 | if the value of sensor 1 is 1500 and the value of sensor 2 is 2000, it is necessary to keep the values around 1500if the value of sensor 1 is 1500 and the value of sensor 2 is 2000, it is necessary to keep the values around 1500. | ||
| 256 | |||
| 257 | Modify the K value of sensor 2: | ||
| 258 | |||
| 259 | * K value calculation as follows: | ||
| 260 | * 1500/2000=0.75, 0.75*1000=750 | ||
| 261 | * Convert 750 to hexadecimal to 02EE. | ||
| 262 | * Send command to sensor 2 | ||
| 263 | * Send：0B 06 00 53 02 EE F8 5D Send successfully and return this command | ||
| 264 | |||
| 265 | |||
| 266 | |||
| 267 | |||
| 268 | = 5. WSS-25 ~-~- Temperature, Humidity, Illuminance, Pressure = | ||
| 269 | |||
| 270 | |||
| 271 | WSS-25 is a 4 in 1 RS485 sensor which can monitor Temperature, Humidity, Illuminance and Pressure at the same time. | ||
| 272 | |||
| 273 | |||
| 274 | == 5.1 Feature == | ||
| 275 | |||
| 276 | |||
| 277 | * RS485 Temperature, Humidity, Illuminance, Pressure sensor | ||
| 278 | |||
| 279 | == 5.2 Specification == | ||
| 280 | |||
| 281 | |||
| 282 | * Input Power: DC 12 ~~ 24v | ||
| 283 | * Interface: RS485 | ||
| 284 | * Temperature Sensor Spec: | ||
| 285 | ** Range: -30 ~~ 70℃ | ||
| 286 | ** resolution 0.1℃ | ||
| 287 | ** Accuracy: ±0.5℃ | ||
| 288 | * Humidity Sensor Spec: | ||
| 289 | ** Range: 0 ~~ 100% RH | ||
| 290 | ** resolution 0.1 %RH | ||
| 291 | ** Accuracy: ±3% RH | ||
| 292 | * Pressure Sensor Spec: | ||
| 293 | ** Range: 10 ~~ 1100hPa | ||
| 294 | ** Resolution: 0.1hPa | ||
| 295 | ** Accuracy: ±0.1hPa | ||
| 296 | * Illuminate sensor: | ||
| 297 | ** Range: 0~~2/20/200kLux | ||
| 298 | ** Resolution: 10 Lux | ||
| 299 | ** Accuracy: ±3%FS | ||
| 300 | * Working Temperature: -30℃ ~~ 70℃ | ||
| 301 | * Working Humidity: 10 ~~ 90%RH | ||
| 302 | * Power Consumption: 4mA @ 12v | ||
| 303 | |||
| 304 | == 5.3 Wiring == | ||
| 305 | |||
| 306 | |||
| 307 | [[image:image-20250505193252-6.png||height="409" width="765"]] | ||
| 308 | |||
| 309 | == 5.4 Dimension == | ||
| 310 | |||
| 311 | |||
| 312 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656057170639-522.png?rev=1.1||alt="1656057170639-522.png"]] | ||
| 313 | |||
| 314 | |||
| 315 | == 5.5 Installation Notice == | ||
| 316 | |||
| 317 | |||
| 318 | Do not power on while connect the cables. Double check the wiring before power on. | ||
| 319 | |||
| 320 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656057199955-514.png?rev=1.1||alt="1656057199955-514.png"]] | ||
| 321 | |||
| 322 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656057212438-475.png?rev=1.1||alt="1656057212438-475.png"]] | ||
| 323 | |||
| 324 | |||
| 325 | = 6. WSS-24 ~-~- Rain/Snow Detect = | ||
| 326 | |||
| 327 | |||
| 328 | WSS-24 is a RS485 rain / snow detect sensor. It can monitor Rain or Snow event. | ||
| 329 | |||
| 330 | WSS-24 has auto heating feature, this ensures measurement more reliable. | ||
| 331 | |||
| 332 | == 6.1 Feature == | ||
| 333 | |||
| 334 | |||
| 335 | * RS485 Rain/Snow detect sensor | ||
| 336 | * Surface heating to dry | ||
| 337 | * grid electrode uses Electroless Nickel/Immersion Gold design for resist corrosion | ||
| 338 | |||
| 339 | == 6.2 Specification == | ||
| 340 | |||
| 341 | |||
| 342 | * Detect if there is rain or snow | ||
| 343 | * Input Power: DC 12 ~~ 24v | ||
| 344 | * Interface: RS485 | ||
| 345 | * Working Temperature: -30℃ ~~ 70℃ | ||
| 346 | * Working Humidity: 10 ~~ 90%RH | ||
| 347 | * Power Consumption: | ||
| 348 | ** No heating: 12mA @ 12v, | ||
| 349 | ** heating: 94ma @ 12v. | ||
| 350 | |||
| 351 | == 6.3 Wiring == | ||
| 352 | |||
| 353 | [[image:image-20250505193053-5.png||height="479" width="895"]] | ||
| 354 | |||
| 355 | == 6.4 Dimension == | ||
| 356 | |||
| 357 | [[image:image-20250505144906-15.png]] | ||
| 358 | |||
| 359 | |||
| 360 | == 6.5 Installation Notice == | ||
| 361 | |||
| 362 | |||
| 363 | Do not power on while connect the cables. Double check the wiring before power on. | ||
| 364 | |||
| 365 | Install with 15°degree. | ||
| 366 | |||
| 367 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656056873783-780.png?rev=1.1||alt="1656056873783-780.png"]] | ||
| 368 | |||
| 369 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656056883736-804.png?rev=1.1||alt="1656056883736-804.png"]] | ||
| 370 | |||
| 371 | == 6.6 Heating == | ||
| 372 | |||
| 373 | |||
| 374 | WSS-24 supports auto-heat feature. When the temperature is below the heat start temperature 15℃, WSS-24 starts to heat and stop at stop temperature (default is 25℃). | ||
| 375 | |||
| 376 | |||
| 377 | = 7. WSS-23 ~-~- CO2/PM2.5/PM10 = | ||
| 378 | |||
| 379 | |||
| 380 | WSS-23 is a RS485 Air Quality sensor. It can monitor CO2, PM2.5 and PM10 at the same time. | ||
| 381 | |||
| 382 | WSS-23 uses weather proof shield which can make sure the sensors are well protected against UV & radiation. | ||
| 383 | |||
| 384 | |||
| 385 | == 7.1 Feature == | ||
| 386 | |||
| 387 | |||
| 388 | * RS485 CO2, PM2.5, PM10 sensor | ||
| 389 | * NDIR to measure CO2 with Internal Temperature Compensation | ||
| 390 | * Laser Beam Scattering to PM2.5 and PM10 | ||
| 391 | |||
| 392 | == 7.2 Specification == | ||
| 393 | |||
| 394 | |||
| 395 | * CO2 Range: 0 ~~ 5000ppm, accuracy: ±3%F•S(25℃) | ||
| 396 | * CO2 resolution: 1ppm | ||
| 397 | * PM2.5/PM10 Range: 0 ~~ 1000μg/m3 , accuracy ±3%F•S(25℃) | ||
| 398 | * PM2.5/PM10 resolution: 1μg/m3 | ||
| 399 | * Input Power: DC 7 ~~ 24v | ||
| 400 | * Preheat time: 3min | ||
| 401 | * Interface: RS485 | ||
| 402 | * Working Temperature: | ||
| 403 | ** CO2: 0℃ ~~ 50℃; | ||
| 404 | ** PM2.5/PM10: -30 ~~ 50℃ | ||
| 405 | * Working Humidity: | ||
| 406 | ** PM2.5/PM10: 15 ~~ 80%RH (no dewing) | ||
| 407 | ** CO2: 0 ~~ 95%RH | ||
| 408 | * Power Consumption: 50mA@ 12v. | ||
| 409 | |||
| 410 | == 7.3 Wiring == | ||
| 411 | |||
| 412 | [[image:image-20250505193033-4.png||height="376" width="689"]] | ||
| 413 | |||
| 414 | == 7.4 Device Dimension == | ||
| 415 | |||
| 416 | |||
| 417 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656056708366-230.png?rev=1.1||alt="1656056708366-230.png"]] | ||
| 418 | |||
| 419 | |||
| 420 | == 7.5 Installation Notice == | ||
| 421 | |||
| 422 | |||
| 423 | Do not power on while connect the cables. Double check the wiring before power on. | ||
| 424 | |||
| 425 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656056751153-304.png?rev=1.1||alt="1656056751153-304.png"]] | ||
| 426 | |||
| 427 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656056766224-773.png?rev=1.1||alt="1656056766224-773.png"]] | ||
| 428 | |||
| 429 | |||
| 430 | = 8. WSS-22 ~-~- Integrated wind speed and direction sensor = | ||
| 431 | |||
| 432 | [[image:1746441120854-584.png||height="271" width="394"]] | ||
| 433 | |||
| 434 | WSS-22 is a RS485 wind speed and wind direction monitor designed for weather station solution. | ||
| 435 | |||
| 436 | WSS-22 shell is made of polycarbonate composite material, which has good anti-corrosion and anti-corrosion characteristics, and ensure the long-term use of the sensor without rust. At the same time, it cooperates with the internal smooth bearing system to ensure the stability of information collection | ||
| 437 | |||
| 438 | |||
| 439 | == 8.1 Feature == | ||
| 440 | |||
| 441 | |||
| 442 | * RS485 wind speed / direction sensor | ||
| 443 | * PC enclosure, resist corrosion | ||
| 444 | |||
| 445 | == 8.2 Specification == | ||
| 446 | |||
| 447 | |||
| 448 | * Wind speed range: 0 ~~ 60m/s | ||
| 449 | * Wind direction range: 0 ~~ 360° | ||
| 450 | * Start wind speed: ≤0.3 m/s | ||
| 451 | * Accuracy: ±(0.3＋0.03V) m/s , ±1° | ||
| 452 | * Input Power: DC 5 ~~ 24v | ||
| 453 | * Interface: RS485 | ||
| 454 | * Working Temperature: -30℃ ~~ 70℃ | ||
| 455 | * Working Humidity: <100% (no dewing) | ||
| 456 | * Power Consumption: 13mA @ 12v. | ||
| 457 | * Cable Length: 2 meters | ||
| 458 | |||
| 459 | == 8.3 Wiring == | ||
| 460 | |||
| 461 | [[image:image-20250505192929-2.png||height="314" width="590"]] | ||
| 462 | |||
| 463 | |||
| 464 | == 8.4 Device Dimension == | ||
| 465 | |||
| 466 | (% class="wikigeneratedid" %) | ||
| 467 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/image-20220624152813-2.png?rev=1.1||alt="image-20220624152813-2.png"]] | ||
| 468 | |||
| 469 | |||
| 470 | == 8.5 Angle Mapping == | ||
| 471 | |||
| 472 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656056303845-585.png?rev=1.1||alt="1656056303845-585.png" height="455" width="476"]] | ||
| 473 | |||
| 474 | |||
| 475 | == 8.6 Installation Notice == | ||
| 476 | |||
| 477 | |||
| 478 | Do not power on while connect the cables. Double check the wiring before power on. | ||
| 479 | |||
| 480 | The sensor must be installed with below direction, towards North. | ||
| 481 | |||
| 482 | [[image:1746441560175-162.png||height="304" width="484"]] | ||
| 483 | |||
| 484 | |||
| 485 | = 9. WSS-21 ~-~- Rain Gauge = | ||
| 486 | |||
| 487 | |||
| 488 | WSS-21 RS485 Rain Gauge is used in meteorology and hydrology to gather and measure the amount of liquid precipitation (mainly rainfall) over an area. | ||
| 489 | |||
| 490 | WSS-21 uses a tipping bucket to detect rainfall. The tipping bucket use 3D streamline shape to make sure it works smoothly and is easy to clean. | ||
| 491 | |||
| 492 | The tipping bucket of WSS-01 is adjusted to the best angle. When installation, user only needs to screw up and adjust the bottom horizontally. | ||
| 493 | |||
| 494 | WSS-21 package includes screw which can be installed to ground. If user want to install WSS-21 on pole, they can purchase WS-K2 bracket kit. | ||
| 495 | |||
| 496 | |||
| 497 | == 9.1 Feature == | ||
| 498 | |||
| 499 | |||
| 500 | * RS485 Rain Gauge | ||
| 501 | * Small dimension, easy to install | ||
| 502 | * Vents under funnel, avoid leaf or other things to avoid rain flow. | ||
| 503 | * ABS enclosure. | ||
| 504 | * Horizontal adjustable. | ||
| 505 | |||
| 506 | == 9.2 Specification == | ||
| 507 | |||
| 508 | |||
| 509 | * Resolution: 0.2mm | ||
| 510 | * Accuracy: ±3% | ||
| 511 | * Range: 0 ~~ 100mm | ||
| 512 | * Rainfall strength: 0mm ~~ 4mm/min (max 8mm/min) | ||
| 513 | * Input Power: DC 5 ~~ 24v | ||
| 514 | * Interface: RS485 | ||
| 515 | * Working Temperature: 0℃ ~~ 70℃ (incorrect below 0 degree, because water become ICE) | ||
| 516 | * Working Humidity: <100% (no dewing) | ||
| 517 | * Power Consumption: 4mA @ 12v. | ||
| 518 | |||
| 519 | == 9.3 Wiring == | ||
| 520 | |||
| 521 | [[image:image-20250505192952-3.png||height="305" width="581"]] | ||
| 522 | |||
| 523 | |||
| 524 | == 9.4 Dimension == | ||
| 525 | |||
| 526 | |||
| 527 | [[image:image-20250505184528-20.png||height="468" width="471"]] | ||
| 528 | |||
| 529 | [[image:image-20250505185334-22.png||height="533" width="470"]] | ||
| 530 | |||
| 531 | == 9.5 Installation Notice == | ||
| 532 | |||
| 533 | |||
| 534 | ((( | ||
| 535 | Do not power on while connect the cables. Double check the wiring before power on. | ||
| 536 | ))) | ||
| 537 | |||
| 538 | ((( | ||
| 539 | Installation Photo as reference: | ||
| 540 | ))) | ||
| 541 | |||
| 542 | |||
| 543 | ((( | ||
| 544 | (% style="color:#4472c4" %)** Install on Ground:** | ||
| 545 | ))) | ||
| 546 | |||
| 547 | ((( | ||
| 548 | WSS-21 Rain Gauge include screws so can install in ground directly . | ||
| 549 | ))) | ||
| 550 | |||
| 551 | |||
| 552 | ((( | ||
| 553 | (% style="color:#4472c4" %)** Install on pole:** | ||
| 554 | ))) | ||
| 555 | |||
| 556 | ((( | ||
| 557 | If user want to install on pole, they can purchase the (% style="color:#4472c4" %)** WS-K2 : Bracket Kit for Pole installation**(%%), and install as below: | ||
| 558 | |||
| 559 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/image-20220624152218-1.png?width=276&height=526&rev=1.1||alt="image-20220624152218-1.png"]] | ||
| 560 | |||
| 561 | WS-K2: Bracket Kit for Pole installation | ||
| 562 | |||
| 563 | WSSC-K2 dimension document, please see: | ||
| 564 | ))) | ||
| 565 | |||
| 566 | [[https:~~/~~/www.dropbox.com/sh/7wa2elfm2q8xq4l/AAB7ZB_gSVGrhmJEgU2LyTQNa?dl=0>>https://www.dropbox.com/sh/7wa2elfm2q8xq4l/AAB7ZB_gSVGrhmJEgU2LyTQNa?dl=0]] | ||
| 567 | |||
| 568 | |||
| 569 |