Table of Contents：

• 1. Actility Thingpark Enterprise
  • 1.1 Introduction
    • 1.1.1 What is Actility Thingpark Enterprise
• 2. Gateway Registration for Basics Station
  • 2.1 Introduction
  • 2.2 Step 1. Add Gateway
  • 2.3 Step 2. Access the gateway GUI
  • 2.4 Step 3. Configure Station
  • 2.5 Start Station
  • 2.6 Successful Connection
  • 2.7 Trouble Shooting
    • 2.7.1 How do users view Basic Station logs and Record logs
    • 2.7.2 How to solve the problem when "(400) TC credentials not found" is displayed in the log

1. Actility Thingpark Enterprise

1.1 Introduction

1.1.1 What is Actility Thingpark Enterprise

ThingPark Enterprise is an IoT connectivity management solution allowing to the deployment of a dedicated and fully controlled LoRaWAN® network for a fast use case enablement. All components of the network, including sensors, gateways, and data routing are managed from a unique and easy-to-use user interface. The ThingPark Enterprise allows full flexibility in the choice of gateways or devices. It is also a flexible, scalable, and secure solution allowing to start with a Proof-of-Concept (POC) and scale to full deployments.

2. Gateway Registration for Basics Station

2.1 Introduction

The LoRa Basics™ Station protocol simplifies the management of large-scale LoRaWAN networks. The LoRa Basics Station doc

Below list the support products and Requirements:

1. LoRaWAN Gateway model: LIG16, LG308, DLOS8 LPS8
2. Firmware version since:lgw--build-v5.4.1651822913

What do you need to prepare

A gateway that can access the internet normally

2.2 Step 1. Add Gateway

The following items need to be configured:

Have need to put in latitude and longitude, and then click "CREATE".

2.3 Step 2. Access the gateway GUI

Users need to update the API key and install the Certificate

2.4 Step 3. Configure Station

Users need to input Server URI, as well as install the CUPS certificate.

Just to clarify.

Configure the gateway

2.5 Start Station

When the user has finished the configuration, Please click Sace&Apply to start station to connect Actility Thingpark Enterprise.

2.6 Successful Connection

If users complete the above steps, which will see the live date in the Actility Thingpark Enterprise.

Station live date

2.7 Trouble Shooting

2.7.1 How do users view Basic Station logs and Record logs

Users can check the station log on the logread/system log page.

Station Log:

and recode the station log on the system/Recode log page.

Recore Log

2.7.2 How to solve the problem when "(400) TC credentials not found" is displayed in the log

In this case, the user needs to check whether the Gateway ID matches the UUID on Actility Thingpark.

In addition, the user needs to regenerate new certificates in ThingPark GUI (Advanced tab of the Base Station panel), Then wait 2-3 minutes to refresh the ThingPark GUI to see if the gateway is online.