How to configure the certificate?

author	version	line-number	content
		1
		2
		3	{{toc/}}
		4
		5
		6	= 1. Burn the Configure certificate. =
		7
		8
		9	(% style="color:blue" %)hex firmware.
		10
		11	After burning, the serial port displays as follows：
		12
		13	[[image:image-20240520093014-1.png]]
		14
		15
		16
		17
		18
		19	= 2. Configure CA certificate. =
		20
		21
		22	Please input the certificate in PEM format for the user. (The format of the image is entered casually, not in PEM format.)
		23
		24	Use the AT command (% style="color:blue" %)AT+CACERT (%%)as follows:
		25
		26	The following certificates are for free input. Please enter the complete certificate when using them.
		27
		28	[[image:image-20240520093355-2.png]]
		29
		30	If the configuration succeeds, the message " successfully configured CA certificate " is displayed. Otherwise it is considered configuration failure.
		31
		32
		33
		34
		35	= 3. Configure client certificate. =
		36
		37
		38	Use the AT command (% style="color:blue" %)AT+CLICERT (%%)as follows：
		39
		40	The following certificates are for free input. Please enter the complete certificate when using them.
		41
		42	[[image:image-20240520095757-3.png]]
		43
		44	Display "Successfully configured client certificate." Configuration successful, otherwise configuration failed.
		45
		46
		47
		48
		49	= 4. Configure client private key. =
		50
		51
		52	Use the AT command (% style="color:blue" %)AT+CLIKEY(%%), as shown below.
		53
		54	The following certificates are for free input. Please enter the complete certificate when using them.
		55
		56	[[image:image-20240520095936-5.png]]
		57
		58	Display "Successfully configured client private key." If the configuration is successful, otherwise it is considered configuration failure.
		59
		60
		61	= 5. burn the xx-NB-GE.bin file. =
		62
		63
		64	After the certificate configuration is completed, burn the xx-NB-GE.bin file, which is the official product firmware.
		65
		66
		67
		68
		69	= 6. AT+TLSMOD command =
		70
		71
		72	To use the TLS mode certificate function, users need to configure the (% style="color:blue" %)AT+TLSMOD(%%) command.
		73
		74	(% style="color:blue" %)AT+TLSMOD=1,0(%%) No authentication
		75
		76	(% style="color:blue" %)AT+TLSMOD=1,1(%%) Perform server authentication
		77
		78	(% style="color:blue" %)AT+TLSMOD=1,2(%%) Perform server and client authentication if requested by the remote server
		79
		80
		81
		82
		83
		84
		85
		86
		87

Wiki source code of How to configure the certificate?