Table of Contents:
1. Update Firmware
1.1 Method 1: Update BIN file
Step1: Connect TrackerD and PC via TypeC cable directly.
Step2: Install CH9102 driver in the PC.
After installation of the driver and plug in TrackerD, user should be able to see com port in PC's device manager.
Step3: Download and Install Flash Tool from :
https://www.espressif.com.cn/en/support/download/other-tools?keys=Flash%2BDownload%2BTools
Step4: Run Flash Download Tool and configure chip type to ESP32
Step5: Select the bin file , com port and proper SPI configure. and click Start.
Bin file can be downloaded from: https://www.dropbox.com/sh/733s8xlwahhqg1d/AABxDz80lBVX_to8zNuUQWFja?dl=0
Users need to use below files:
- boot_app0.bin @0e000
- ESP_LORA-eeprom-class.bin @ 0x10000
After upgrade finish, it will shows below:
2. FAQ:
2.1 Where can i find the source files for TrackerD?
Software & Hardware Source: https://github.com/dragino/TrackerD