LSPH01-LoRaWAN Soil pH Sensor User Manual

The Dragino LSPH01 is a (% style="color:#4f81bd" %)**LoRaWAN Soil pH Sensor**(%%) for IoT of Agriculture. It is designed to measure the soil PH and soil temperature, so to send to the platform to analyze the soil acid or alkali level. The probe is IP68 waterproof.

28

29

LSPH01 probe is made by Solid AgCl reference electrode and Pure metal pH sensitive electrode. It can detect soil's** (% style="color:#4f81bd" %)pH (%%)**with high accuracy and stable value. The LSPH01 probe can be buried into soil for long time use.

30

31

The LoRa wireless technology used in LSPH01 allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.

32

33

LSPH01 is powered by (% style="color:#4f81bd" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.

34

35

Each LSPH01 is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.

36

37

38

[[image:1654580186518-415.png]]

== 1.2 Features ==

* LoRaWAN 1.0.3 Class A

45

* Ultra-low power consumption

46

* Monitor soil pH with temperature compensation.

47

* Monitor soil temperature

48

* Monitor Battery Level

49

* Support pH calibration by end user

50

* Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865

51

* AT Commands to change parameters

52

* Uplink on periodically

53

* Downlink to change configure

54

* IP66 Waterproof Enclosure

55

* IP68 rate for the Sensor Probe

56

* 8500mAh Battery for long term use

== 1.3 Probe Specification ==

61

62

63

(% style="color:#4f81bd" %)**Soil pH:**

64

65

* Range: 3 ~~ 10 pH

66

* Resolution: 0.01 pH

67

* Accuracy: ±2% under (0~~50 ℃, Accuracy will poor under 0 due to frozen)

68

* Temperature Compensation Range: 0 ~~ 50℃

* IP68 Protection

* Length: 3.5 meters

(% style="color:#4f81bd" %)**Soil Temperature:**

* Range -40℃～85℃

* Resolution: 0.1℃

* Accuracy: <±0.5℃(-10℃～40℃)，<±0.8℃ (others)

* IP68 Protection

* Length: 3.5 meters

== 1.4 Applications ==

* Smart Agriculture

== 1.5 Pin mapping and power on ==

89

90

[[image:1654580482666-473.png]]

= 2. Configure LSPH01 to connect to LoRaWAN network =

95

96

== 2.1 How it works ==

97

98

(((

99

The LSPH01 is configured as LoRaWAN OTAA Class A mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and power on the LSPH01. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.

)))

(((

In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>||anchor="H5.200BUseATCommand"]]to set the keys in the LSPH01.

)))

== 2.2 Quick guide to connect to LoRaWAN server (OTAA) ==

108

109

(((

110

Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LG308>>url:http://www.dragino.com/products/lora/item/140-lg308.html]] as a LoRaWAN gateway in this example.

)))

(((

)))

(((

The LG308 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.

)))

(((

**Step 1**: Create a device in TTN with the OTAA keys from LSPH01.

)))

(((

Each LSPH01 is shipped with a sticker with the default device EUI as below:

)))

[[image:image-20220607135531-1.jpeg]]

131

132

133

You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:

134

135

136

**Register the device**

137

138

[[image:1654581442672-605.png]]

**Add APP EUI and DEV EUI**

143

144

[[image:1654581465717-368.png]]

**Add APP EUI in the application**

149

150

[[image:1654581493871-516.png]]

**Add APP KEY**

[[image:1654581517630-991.png]]

157

158

159

**Step 2**: Power on LSPH01

160

161

162

Put a Jumper on JP2 to power on the device. ( The Switch must be in FLASH position).

163

164

[[image:image-20220607135918-2.png]]

165

166

167

**Step 3:** The LSPH01 will auto join to the TTN network. After join success, it will start to upload messages to TTN and you can see the messages in the panel.

168

169

[[image:1654581590132-631.png]]

== 2.3 Uplink Payload ==

174

175

LSPH01 will uplink payload via LoRaWAN with below payload format:

176

177

Uplink payload includes in total 11 bytes.

178

179

Normal uplink payload:

180

181

(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)

|(((

**Size**

**(bytes)**

)))|**2**|**2**|**2**|**2**|**1**|**1**|**1**

187

|**Value**|[[BAT>>||anchor="H2.3.1BatteryInfo"]]|(((

188

[[Temperature>>||anchor="H2.3.2DS18B20Temperaturesensor"]]

189

190

[[(Optional)>>||anchor="H2.3.2DS18B20Temperaturesensor"]]

191

)))|[[Soil pH>>||anchor="H2.3.3SoilpH"]]|[[Soil Temperature>>||anchor="H2.3.4SoilTemperature"]]|(((

192

[[Digital Interrupt (Optional)>>||anchor="H2.3.5InterruptPin"]]

193

)))|Reserve|(((

194

[[Message Type>>||anchor="H2.3.6MessageType"]]

195

)))

196

197

[[image:1654581735133-458.png]]

=== 2.3.1 Battery Info ===

202

203

204

Check the battery voltage for LSPH01.

Ex1: 0x0B45 = 2885mV

Ex2: 0x0B49 = 2889mV

=== 2.3.2 DS18B20 Temperature sensor ===

213

214

This is optional, user can connect external DS18B20 sensor to the +3.3v, 1-wire and GND pin . and this field will report temperature.

**Example**:

If payload is: 0105H: (0105 & FC00 == 0), temp = 0105H /10 = 26.1 degree

220

221

If payload is: FF3FH : (FF3F & FC00 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.

=== 2.3.3 Soil pH ===

Range: 0 ~~ 14 pH

**Example:**

(% style="color:#037691" %)** 0x02B7(H) = 695(D) = 6.95pH**

=== 2.3.4 Soil Temperature ===

Get Soil Temperature

**Example**:

If payload is: **0105H**: (0105 & FC00 == 0), temp = 0105H /10 = 26.1 degree

243

244

If payload is: **FF3FH** : (FF3F & FC00 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.

=== 2.3.5 Interrupt Pin ===

249

250

This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H3.2SetInterruptMode"]] for the hardware and software set up.

**Example:**

0x00: Normal uplink packet.

256

257

0x01: Interrupt Uplink Packet.

=== 2.3.6 Message Type ===

262

263

For a normal uplink payload, the message type is always 0x01.

Valid Message Type:

(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)

269

|**Message Type Code**|**Description**|**Payload**

270

|0x01|Normal Uplink|[[Normal Uplink Payload>>||anchor="H2.3Uplink Payload"]]

271

|0x02|Reply configures info|[[Configure Info Payload>>||anchor="H3.4GetFirmwareVersionInfo"]]

272

|0x03|Reply Calibration Info|[[Calibration Payload>>||anchor="H2.7Calibration"]]

=== 2.3.7 Decode payload in The Things Network ===

277

278

While using TTN network, you can add the payload format to decode the payload.

279

280

281

[[image:1654582541848-906.png]]

282

283

(((

284

The payload decoder function for TTN is here:

)))

(((

LSPH01 TTN Payload Decoder: [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Decoder/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSNPK01/Decoder/]]

)))

== 2.4 Uplink Interval ==

294

295

The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>doc:Main.End Device AT Commands and Downlink Command.WebHome||anchor="H4.1ChangeUplinkInterval"]]

== 2.5 Show Data in DataCake IoT Server ==

300

301

[[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:

302

303

304

**Step 1**: Be sure that your device is programmed and properly connected to the network at this time.

305

306

**Step 2**: To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:

307

308

309

[[image:1654583683416-869.png]]

310

311

312

[[image:1654583694084-878.png]]

313

314

315

Step 3: Create an account or log in Datacake.

316

317

Step 4: Create LSPH01 product.

318

319

[[image:1654583711590-413.png]]

[[image:1654583732798-193.png]]

324

325

326

[[image:1654583749683-259.png]]

327

328

329

Step 5: add payload decode

330

331

Download Datacake decoder from: [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Decoder/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSNPK01/Decoder/]]

332

333

334

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image017.png]]

335

336

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image018.png]]

337

338

339

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image019.png]]

340

341

342

After added, the sensor data arrive TTN, it will also arrive and show in Mydevices.

343

344

345

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image020.png]]

1.

11. Installation and Maintain

353

111. Before measurement

354

355

If the LSPH01 has more than 7 days not use or just clean the pH probe. User should put the probe inside pure water for more than 24 hours for activation. If no put in water, user need to put inside soil for more than 24 hours to ensure the measurement accuracy.

1.

11.

111. Measurement

**Measurement the soil surface**

363

364

365

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image021.png]] Choose the proper measuring position. Split the surface soil according to the measured deep.

366

367

368

Put pure water, or rainwater to make the soil of measurement point to moist mud. Remove rocks or hard things.

369

370

371

Slowly insert the probe to the measure point. Don’t use large force which will break the probe. Make sure not shake when inserting.

372

373

374

Put soil over the probe after insert. And start to measure.

375

376

377

**Measurement inside soil**

Dig a hole with diameter > 20CM.

382

383

384

Insert the probe inside, method like measure the surface.

1.

11.

111. Maintain Probe

1111. pH probe electrode is fragile and no strong. User must avoid strong force or hitting it.

391

1111. After long time use (3~~ 6 months). The probe electrode needs to be clean; user can use high grade sandpaper to polish it or put in 5% hydrochloric acid for several minutes. After the metal probe looks like new, user can use pure water to wash it.

392

1111. Probe reference electrode is also no strong, need to avoid strong force or hitting.

393

1111. User should keep reference electrode wet while not use.

394

1111. Avoid the probes to touch oily matter. Which will cause issue in accuracy.

395

1111. The probe is IP68 can be put in water.

1.

11. Calibration

User can do calibration for the probe. It is limited to use below pH buffer solution to calibrate: 4.00, 6.86, 9.18. When calibration, user need to clean the electrode and put the probe in the pH buffer solution to wait the value stable ( a new clean electrode might need max 24 hours to be stable).

401

402

403

**After stable, user can use below command to calibrate.**

404

405

406

|**pH buffer solution**|**AT Command to calibrate**|**Downlink Command**|**Read Cal Value**

407

|**4.00**|**AT+PHCAL=4**|(((

408

**0x13 04**

409

410

**Reply with Calibrate payload**

)))|(((

**AT+PHCAL=?**

**Example 41,61,91**

)))

|**6.86**|**AT+PHCAL=6**|(((

417

**0x13 06**

418

419

**Reply with Calibrate payload**

420

)))|**AT+PHCAL=?**

421

|**9.18**|**AT+PHCAL=9**|(((

422

**0x13 09**

423

424

**Reply with Calibrate payload**

425

)))|**AT+PHCAL=?**

426

|**Factory Default**|**AT+PHCAL=15**|(((

427

**0x13 15**

428

429

**Reply with Calibrate payload**

)))|(((

**AT+PHCAL=?**

**Example 151**

)))

Calibration Payload

|(((

**Size**

**(bytes)**

)))|**1**|**1**|**1**|**7**|**1**

|**Value**|(((

PH4

Calibrate value

)))|PH6.86 Calibrate value|(((

PH9.18

Calibrate value

)))|Reserve|(((

[[Message>>path:#Message_Type]]

453

454

[[Type>>path:#Message_Type]]

Always 0x03

)))

User can also send 0x14 downlink command to poll the current calibration payload.

460

461

462

|**Downlink Control Type**|**FPort**|**Type Code**|**Downlink payload size(bytes)**

463

|Get Calibration Version Info|Any|14|2

464

465

* Reply to the confirmation package: 14 01

466

* Reply to non-confirmed packet: 14 00

1.

11. Frequency Plans

The LSPH01 uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.

1.

11.

111. EU863-870 (EU868)

Uplink:

868.1 - SF7BW125 to SF12BW125

480

481

868.3 - SF7BW125 to SF12BW125 and SF7BW250

482

483

868.5 - SF7BW125 to SF12BW125

484

485

867.1 - SF7BW125 to SF12BW125

486

487

867.3 - SF7BW125 to SF12BW125

488

489

867.5 - SF7BW125 to SF12BW125

490

491

867.7 - SF7BW125 to SF12BW125

492

493

867.9 - SF7BW125 to SF12BW125

868.8 - FSK

Downlink:

Uplink channels 1-9 (RX1)

501

502

869.525 - SF9BW125 (RX2 downlink only)

1.

11.

111. US902-928(US915)

508

509

Used in USA, Canada and South America. Frequency band as per definition in LoRaWAN 1.0.3 Regional document.

510

511

512

To make sure the end node supports all sub band by default. In the OTAA Join process, the end node will use frequency 1 from sub-band1, then frequency 1 from sub-band2, then frequency 1 from sub-band3, etc to process the OTAA join.

513

514

515

After Join success, the end node will switch to the correct sub band by:

516

517

* Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band

518

* Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)

1.

11.

111. CN470-510 (CN470)

523

524

Used in China, Default use CHE=1

Uplink:

486.3 - SF7BW125 to SF12BW125

529

530

486.5 - SF7BW125 to SF12BW125

531

532

486.7 - SF7BW125 to SF12BW125

533

534

486.9 - SF7BW125 to SF12BW125

535

536

487.1 - SF7BW125 to SF12BW125

537

538

487.3 - SF7BW125 to SF12BW125

539

540

487.5 - SF7BW125 to SF12BW125

541

542

487.7 - SF7BW125 to SF12BW125

Downlink:

506.7 - SF7BW125 to SF12BW125

548

549

506.9 - SF7BW125 to SF12BW125

550

551

507.1 - SF7BW125 to SF12BW125

552

553

507.3 - SF7BW125 to SF12BW125

554

555

507.5 - SF7BW125 to SF12BW125

556

557

507.7 - SF7BW125 to SF12BW125

558

559

507.9 - SF7BW125 to SF12BW125

560

561

508.1 - SF7BW125 to SF12BW125

562

563

505.3 - SF12BW125 (RX2 downlink only)

1.

11.

111. AU915-928(AU915)

569

570

Frequency band as per definition in LoRaWAN 1.0.3 Regional document.

571

572

573

To make sure the end node supports all sub band by default. In the OTAA Join process, the end node will use frequency 1 from sub-band1, then frequency 1 from sub-band2, then frequency 1 from sub-band3, etc to process the OTAA join.

574

575

576

After Join success, the end node will switch to the correct sub band by:

577

578

* Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band

579

* Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)

1.

11.

111. AS920-923 & AS923-925 (AS923)

584

585

**Default Uplink channel:**

586

587

923.2 - SF7BW125 to SF10BW125

588

589

923.4 - SF7BW125 to SF10BW125

590

591

592

**Additional Uplink Channel**:

593

594

(OTAA mode, channel added by JoinAccept message)

595

596

**AS920~~AS923 for Japan, Malaysia, Singapore**:

597

598

922.2 - SF7BW125 to SF10BW125

599

600

922.4 - SF7BW125 to SF10BW125

601

602

922.6 - SF7BW125 to SF10BW125

603

604

922.8 - SF7BW125 to SF10BW125

605

606

923.0 - SF7BW125 to SF10BW125

607

608

922.0 - SF7BW125 to SF10BW125

609

610

611

**AS923 ~~ AS925 for Brunei, Cambodia, Hong Kong, Indonesia, Laos, Taiwan, Thailand, Vietnam**:

612

613

923.6 - SF7BW125 to SF10BW125

614

615

923.8 - SF7BW125 to SF10BW125

616

617

924.0 - SF7BW125 to SF10BW125

618

619

924.2 - SF7BW125 to SF10BW125

620

621

924.4 - SF7BW125 to SF10BW125

622

623

924.6 - SF7BW125 to SF10BW125

**Downlink:**

Uplink channels 1-8 (RX1)

630

631

923.2 - SF10BW125 (RX2)

1.

11.

111. KR920-923 (KR920)

Default channel:

922.1 - SF7BW125 to SF12BW125

641

642

922.3 - SF7BW125 to SF12BW125

643

644

922.5 - SF7BW125 to SF12BW125

645

646

647

Uplink: (OTAA mode, channel added by JoinAccept message)

648

649

922.1 - SF7BW125 to SF12BW125

650

651

922.3 - SF7BW125 to SF12BW125

652

653

922.5 - SF7BW125 to SF12BW125

654

655

922.7 - SF7BW125 to SF12BW125

656

657

922.9 - SF7BW125 to SF12BW125

658

659

923.1 - SF7BW125 to SF12BW125

660

661

923.3 - SF7BW125 to SF12BW125

Downlink:

Uplink channels 1-7(RX1)

667

668

921.9 - SF12BW125 (RX2 downlink only; SF12BW125 might be changed to SF9BW125)

1.

11.

111. IN865-867 (IN865)

Uplink:

865.0625 - SF7BW125 to SF12BW125

678

679

865.4025 - SF7BW125 to SF12BW125

680

681

865.9850 - SF7BW125 to SF12BW125

Downlink:

Uplink channels 1-3 (RX1)

687

688

866.550 - SF10BW125 (RX2)

1.

11. LED Indicator

The LSPH01 has an internal LED which is to show the status of different state.

695

696

697

* The sensor is detected when the device is turned on, and it will flash 4 times quickly when it is detected.

698

* Blink once when device transmit a packet.

699

700

1.

701

11. Firmware Change Log

702

703

**Firmware download link:**

704

705

[[http:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Firmware/>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSE01/Firmware/]]

706

707

708

**Firmware Upgrade Method:**

709

710

[[http:~~/~~/wiki.dragino.com/index.pHp?title=Firmware_Upgrade_Instruction_for_STM32_base_products#Introduction>>url:http://wiki.dragino.com/index.php?title=Firmware_Upgrade_Instruction_for_STM32_base_products#Introduction]]

1. Configure LSPH01 via AT Command or LoRaWAN Downlink

718

719

Use can configure LSPH01 via AT Command or LoRaWAN Downlink.

720

721

* AT Command Connection: See [[FAQ>>path:#AT_COMMAND]].

722

* LoRaWAN Downlink instruction for different platforms:

723

724

[[http:~~/~~/wiki.dragino.com/index.pHp?title=Main_Page#Use_Note_for_Server>>url:http://wiki.dragino.com/index.php?title=Main_Page#Use_Note_for_Server]]

725

726

727

There are two kinds of commands to configure LSPH01, they are:

728

729

* **General Commands**.

730

731

These commands are to configure:

732

733

* General system settings like: uplink interval.

734

* LoRaWAN protocol & radio related command.

735

736

They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:

737

738

[[http:~~/~~/wiki.dragino.com/index.pHp?title=End_Device_Downlink_Command>>url:http://wiki.dragino.com/index.php?title=End_Device_Downlink_Command]]

739

740

741

* **Commands special design for LSPH01**

742

743

These commands only valid for LSPH01, as below:

1.

11. Set Transmit Interval Time

748

749

Feature: Change LoRaWAN End Node Transmit Interval.

750

751

**AT Command: AT+TDC**

752

753

|**Command Example**|**Function**|**Response**

754

|AT+TDC=?|Show current transmit Interval|(((

30000

OK

the interval is 30000ms = 30s

760

)))

761

|AT+TDC=60000|Set Transmit Interval|(((

762

OK

763

764

Set transmit interval to 60000ms = 60 seconds

765

)))

766

767

**Downlink Command: 0x01**

768

769

Format: Command Code (0x01) followed by 3 bytes time value.

770

771

If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.

772

773

* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds

774

* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds

775

776

1.

777

11. Set Interrupt Mode

778

779

Feature, Set Interrupt mode for GPIO_EXIT.

780

781

**AT Command: AT+INTMOD**

782

783

|**Command Example**|**Function**|**Response**

784

|AT+INTMOD=?|Show current interrupt mode|(((

0

OK

the mode is 0 = No interruption

790

)))

791

|AT+INTMOD=2|(((

792

Set Transmit Interval

793

794

1. (Disable Interrupt),

795

1. (Trigger by rising and falling edge),

796

1. (Trigger by falling edge)

797

1. (Trigger by rising edge)

798

)))|OK

799

800

**Downlink Command: 0x06**

801

802

Format: Command Code (0x06) followed by 3 bytes.

803

804

This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.

805

806

* Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode

807

* Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger

1.

11. Calibrate Sensor

Detail See [[Calibration Guide>>path:#Calibration]] for the user of 0x13 and 0x14 downlink commands

1.

11. Get Firmware Version Info

818

819

Feature: use downlink to get firmware version.

820

821

822

**Downlink Command: 0x26**

823

824

825

|**Downlink Control Type**|**FPort**|**Type Code**|**Downlink payload size(bytes)**

826

|Get Firmware Version Info|Any|26|2

827

828

* Reply to the confirmation package: 26 01

829

* Reply to non-confirmed packet: 26 00

830

831

Device will send an uplink after got this downlink command. With below payload:

832

833

Configures info payload:

|(((

**Size**

**(bytes)**

)))|**1**|**1**|**1**|**1**|**1**|**5**|**1**

840

|**Value**|Software Type|(((

Frequency

Band

)))|Sub-band|(((

Firmware

Version

)))|Sensor Type|Reserve|(((

849

[[Message>>path:#Message_Type]]

850

851

[[Type>>path:#Message_Type]]

Always 0x02

)))

**Software Type**: Always 0x03 for LSPH01

**Frequency Band**:

*0x01: EU868

*0x02: US915

*0x03: IN865

*0x04: AU915

*0x05: KZ865

*0x06: RU864

*0x07: AS923

*0x08: AS923-1

*0x09: AS923-2

*0xa0: AS923-3

**Sub-Band**: value 0x00 ~~ 0x08

883

884

885

**Firmware Version**: 0x0100, Means: v1.0.0 version

**Sensor Type**:

0x01: LSE01

0x02: LDDS75

0x03: LDDS20

0x04: LLMS01

0x05: LSPH01

0x06: LSNPK01

0x07: LDDS12

1. Battery & How to replace

910

11. Battery Type

911

912

LSPH01 is equipped with a [[8500mAH ER26500 Li-SOCI2 battery>>url:https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]. The battery is un-rechargeable battery with low discharge rate targeting for 8~~10 years use. This type of battery is commonly used in IoT target for long-term running, such as water meter.

913

914

915

The discharge curve is not linear so can’t simply use percentage to show the battery level. Below is the battery performance.

916

917

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image022.png]]

918

919

920

Minimum Working Voltage for the LSPH01:

921

922

LSPH01: 2.45v ~~ 3.6v

1.

11. Replace Battery

Any battery with range 2.45 ~~ 3.6v can be a replacement. We recommend to use Li-SOCl2 Battery.

929

930

And make sure the positive and negative pins match.

1.

11. Power Consumption Analyze

936

937

Dragino Battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.

938

939

940

Instruction to use as below:

941

942

943

Step 1: Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from:

944

945

[[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]

946

947

948

Step 2: Open it and choose

* Product Model

* Uplink Interval

* Working Mode

And the Life expectation in difference case will be shown on the right.

955

956

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image023.png]]

957

958

959

The battery related documents as below:

960

961

* [[Battery Dimension>>url:https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]],

962

* [[Lithium-Thionyl Chloride Battery>>url:https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]] datasheet

963

* [[Lithium-ion Battery-Capacitor datasheet>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC_1520_datasheet.jpg]], [[Tech Spec>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC1520%20Technical%20Specification20171123.pdf]]

|(((

JST-XH-2P connector

)))

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image024.png]]

1.

11.

111. Battery Note

The Li-SICO battery is designed for small current / long period application. It is not good to use a high current, short period transmit method. The recommended minimum period for use of this battery is 5 minutes. If you use a shorter period time to transmit LoRa, then the battery life may be decreased.

1.

11.

111. Replace the battery

983

984

You can change the battery in the LSPH01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won’t be voltage drop between battery and main board.

985

986

987

The default battery pack of LSPH01 includes a ER26500 plus super capacitor. If user can’t find this pack locally, they can find ER26500 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)

1. Use AT Command

11. Access AT Commands

996

997

LSPH01 supports AT Command set in the stock firmware. You can use a USB to TTL adapter to connect to LSPH01 for using AT command, as below.

998

999

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image025.png]]

Connection:

USB TTL GND <~-~-~-~-> GND

1004

1005

USB TTL TXD <~-~-~-~-> UART_RXD

1006

1007

USB TTL RXD <~-~-~-~-> UART_TXD

1008

1009

1010

In the PC, you need to set the serial baud rate to **9600** to access the serial console for LSPH01. LSPH01 will output system info once power on as below:

1011

1012

1013

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image026.png]]

1014

1015

Valid AT Command please check [[Configure Device>>path:#Configure_Device]].

1. FAQ

11. How to change the LoRa Frequency Bands/Region

1022

1023

You can follow the instructions for [[how to upgrade image>>path:#3ygebqi]].

1024

When downloading the images, choose the required image file for download.

1. Trouble Shooting

11. AT Commands input doesn’t work

1030

1031

In the case if user can see the console output but can’t type input to the device. Please check if you already include the **ENTER** while sending out the command. Some serial tool doesn’t send **ENTER** while press the send key, user need to add ENTER in their string.

1. Order Info

Part Number: **LSPH01-XX**

1037

1038

1039

**XX**: The default frequency band

1040

1041

* **AS923**: LoRaWAN AS923 band

1042

* **AU915**: LoRaWAN AU915 band

1043

* **EU433**: LoRaWAN EU433 band

1044

* **EU868**: LoRaWAN EU868 band

1045

* **KR920**: LoRaWAN KR920 band

1046

* **US915**: LoRaWAN US915 band

1047

* **IN865**: LoRaWAN IN865 band

1048

* **CN470**: LoRaWAN CN470 band

1. Packing Info

**Package Includes**:

1053

1054

* LSPH01 LoRaWAN Soil Ph Sensor x 1

1055

1056

**Dimension and weight**:

* Device Size: cm

* Device Weight: g

* Package Size / pcs : cm

* Weight / pcs : g

= 10. Support =

* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.

1066

* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to

1067

1068

[[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]

Wiki source code of LSPH01-LoRaWAN Soil pH Sensor User Manual

Applications

Navigation