LHT52 - LoRaWAN Temperature & Humidity Sensor User Manual

The Dragino LHT52 Temperature & Humidity sensor is a Long Range LoRaWAN Sensor. It includes a (% style="color:blue" %)**built-in Temperature & Humidity sensor** (%%)and has a USB Type-C sensor connector to connect to external sensors such as external Temperature Sensor.

26

)))

27

28

(((

29

LHT52 (% style="color:blue" %)**senses environment temperature and humidity**(%%) and send these values via long-range wireless LoRaWAN protocol. It targets professional wireless sensor network applications such as food service, smart metering, smart cities, building automation, and so on.

)))

(((

LHT52 supports(% style="color:blue" %)** 2 x AAA batteries **(%%)and works for a long time up to several years. Use can replace the batteries easily after they are finished.

)))

(((

LHT52 is fully compatible with LoRaWAN v1.0.3 protocol, it can work with standard LoRaWAN gateway.

)))

(((

LHT52 supports(% style="color:blue" %)** Datalog feature** (%%)to make sure users won't miss sensor data. It records sensor value for every uplink. These values can be retrieved by LoRaWAN server via downlink command.

)))

(((

LHT52 supports(% style="color:blue" %)** temperature alarm feature**(%%). It can uplink alarm in a short interval while temperature exceeds preset limits.

)))

(((

*Battery life depends how often to send data, please see [[battery analyzer>>||anchor="H4.2A0PowerConsumptionAnalyze"]].

50

)))

51

52

[[image:1655774519494-861.png]]

== 1.2 Features ==

* Wall Attachable.

* LoRaWAN v1.0.3 Class A protocol.

60

* Built-in Temperature & Humidity sensor

61

* Optional External Probe

62

* Frequency Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915

63

* AT Commands to change parameters

64

* Remote configure parameters via LoRaWAN Downlink

65

* Firmware upgradable via program port

66

* Support 2 x AAA LR03 batteries.

* Datalog feature

* IP Rating: IP52

== 1.3 Specification ==

73

74

75

**Built-in Temperature Sensor:**

76

77

* Resolution: 0.01 °C

78

* Accuracy Tolerance: Typ ±0.3 °C

79

* Long Term Drift: < 0.02 °C/yr

80

* Operating Range: -20 ~~ 50 °C

81

82

**Built-in Humidity Sensor:**

83

84

* Resolution: 0.1 %RH

85

* Accuracy Tolerance: Typ ±3 %RH

86

* Long Term Drift: < 0.02 °C/yr

87

* Operating Range: 0 ~~ 99.0 %RH(no Dew)

== 1.4 Power Consumption ==

92

93

94

LHT52 (without external sensor): Idle: 5uA, Transmit: max 110mA

95

96

LHT52 + External Temperature Probe (AS-01): Idle: 6uA, Transmit: max 110mA.

97

98

99

== 1.5 Storage & Operation Temperature ==

-20°C to +50°C

== 1.6 Applications ==

106

107

108

* Smart Buildings & Home Automation

109

* Logistics and Supply Chain Management

* Smart Metering

* Smart Agriculture

* Smart Cities

* Smart Factory

= 2. Operation Mode =

118

119

== 2.1 How it work? ==

120

121

122

Each LHT52 is shipped with a worldwide unique set of LoRaWAN OTAA keys. To use LHT52 in a LoRaWAN network, user needs to input the OTAA keys in LoRaWAN network server. After this, if LHT52 is under this LoRaWAN network coverage, LHT52 can join the LoRaWAN network and start to transmit sensor data. The default period for each uplink is** 20 minutes**.

123

124

125

== 2.2 How to Activate LHT52? ==

126

127

128

(% style="color:red" %)** 1. Open enclosure from below position.**

129

130

[[image:image-20220621093835-1.png]]

131

132

133

(% style="color:red" %)** 2. Insert 2 x AAA LR03 batteries.**

134

135

[[image:image-20220621093835-2.png]]

136

137

138

(% style="color:red" %)** 3. Press the reset button to activate device.**

139

140

[[image:image-20220621093835-3.png]]

141

142

143

User can check [[LED Status>>||anchor="H2.8LEDIndicator"]] to know the working state of LHT52.

144

145

146

== 2.3 Example to join LoRaWAN network ==

147

148

149

This section shows an example for how to join the [[TheThingsNetwork>>url:https://www.thethingsnetwork.org/]] LoRaWAN IoT server. Usages with other LoRaWAN IoT servers are of similar procedure.

150

151

152

(% _mstvisible="1" class="wikigeneratedid" %)

153

[[image:1655775912928-657.png]]

154

155

Assume the DLOS8 is already set to connect to [[TTN V3 network >>url:https://eu1.cloud.thethings.network/]]. We need to add the LHT52 device in TTN V3 portal.

156

157

158

(% style="color:blue" %)**Step 1**(%%): Create a device in TTN V3 with the OTAA keys from LHT52.

159

160

Each LHT52 is shipped with a sticker with the default DEV EUI as below:

161

162

163

[[image:image-20230426083617-1.png]]

164

165

166

Enter these keys in the LoRaWAN Server portal. Below is TTN V3 screen shot:

167

168

Add APP EUI in the application.

169

170

choose to create the device manually.

171

172

Add APP KEY and DEV EUI

173

174

175

[[image:image-20220522232916-3.png||_mstalt="430495" _mstvisible="3"]]

176

177

[[image:1655776122894-257.png]]

**Default mode OTAA**

182

183

184

[[image:1655776241177-240.png]]

(% style="color:blue" %)**Step 2**(%%): Use ACT button to activate LHT52 and it will auto join to the TTN V3 network. After join success, it will start to upload sensor data to TTN V3 and user can see in the panel.

189

190

191

[[image:image-20220621095134-4.png]]

192

193

194

== 2.4 Uplink Payload ==

195

196

197

Uplink payloads include two types: Valid Sensor Value and other status / control command.

198

199

* Valid Sensor Value: Use FPORT=2

200

* Other control command: Use FPORT other than 2.

=== 2.4.1 Uplink FPORT~=5, Device Status ===

205

206

207

Uplink the device configures with FPORT=5. Once LHT52 Joined the network, it will uplink this message to the server. After first uplink, LHT52 will uplink Device Status every 12 hours.

208

209

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:370px" %)

210

|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)**Size(bytes)**|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 80px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 80px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 30px;background-color:#D9E2F3;color:#0070C0" %)**2**

211

212

213

[[image:image-20220621100550-5.png]]

214

215

Example Payload (FPort=5): [[image:image-20220621105116-11.png]]

216

217

218

(% style="color:#4472c4" %)**Sensor Model**(%%): For LHT52, this value is 0x09.

219

220

(% style="color:#4472c4" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version.

221

222

(% style="color:#4472c4" %)**Frequency Band**:

*0x01: EU868

*0x02: US915

*0x03: IN865

*0x04: AU915

*0x05: KZ865

*0x06: RU864

*0x07: AS923

*0x08: AS923-1

*0x09: AS923-2

*0x0a: AS923-3

(% style="color:#4472c4" %)**Sub-Band**(%%): value 0x00 ~~ 0x08(only for CN470, AU915,US915. Others are0x00)

246

247

(% style="color:#4472c4" %)**BAT**(%%): shows the battery voltage for LHT52.

248

249

(% style="color:#4472c4" %)**Ex1**(%%): 0x0B3A = 2874mV

250

251

252

Use can also get the Device Status uplink through the downlink command:

253

254

(% style="color:#4472c4" %)**Downlink: 0x2301**

255

256

257

[[image:image-20220621100550-6.png||height="504" width="1491"]]

258

259

260

=== 2.4.2 Uplink FPORT~=2, Real time sensor value ===

261

262

263

LHT52 will send this uplink after Device Status uplink once join LoRaWAN network successfully. And it will periodically send this uplink. Default interval is 20 minutes and [[can be changed>>||anchor="H3.1A0DownlinkCommandSet"]].

264

265

Uplink uses FPORT=2 and every 20 minutes send one uplink by default.

266

267

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:390px" %)

268

|=(% style="width: 60px;background-color:#D9E2F3" %)(((

269

**Size(bytes)**

270

)))|=(% style="width: 60px;background-color:#D9E2F3" %)(((

271

**2**

272

)))|=(% style="width: 60px;background-color:#D9E2F3" %)(((

273

**2**

274

)))|=(% style="width: 90px;background-color:#D9E2F3" %)(((

275

**2**

276

)))|=(% style="width: 40px;background-color:#D9E2F3" %)(((

277

**1**

278

)))|=(% style="width: 80px;background-color:#D9E2F3" %)(((

279

**4**

280

)))

281

|(% style="width:97px" %)(((

282

**Value**

283

)))|(% style="width:39px" %)(((

284

[[Temperature>>||anchor="HTemperature26ExternalTemperature:"]]

285

)))|(% style="width:100px" %)(((

286

(((

287

[[Humidity>>||anchor="HHumidity:"]]

288

)))

289

)))|(% style="width:77px" %)(((

290

(((

291

[[External Temperature>>||anchor="HTemperature26ExternalTemperature:"]]

292

)))

293

)))|(% style="width:47px" %)(((

294

[[Ext>>||anchor="HExtension23" _msthash="1817486"]] #

295

)))|(% style="width:51px" %)(((

296

[[Unix TimeStamp>>||anchor="H2.6.1A0UnixTimeStamp"]]

)))

**Temperature:**

[[image:image-20220621101526-7.png]]

302

303

Example Payload (FPort=2): (% style="background-color:yellow" %)**08 CD 02 20 7F FF 01 61 CD 4E DD**

304

305

306

==== (% style="color:blue" %)**Temperature & External Temperature:**(%%) ====

307

308

309

* Example1: 0x08CD/100=22.53℃

310

* Example2: (0xF5C6-65536)/100=-26.18℃

311

312

If payload is: F5C6 : (F5C6 & 8000 == 1) , temp = (F5C6 - 65536)/100 =-26.18℃

313

314

（F5C6 & 8000：Judge whether the highest bit is 1, when the highest bit is 1, it is negative）

315

316

317

==== (% style="color:blue" %)**Humidity:**(%%) ====

318

319

320

* Humidity: 0x0220/10=54.4%

321

322

==== (% style="color:blue" %)**Extension #**(%%) ====

323

324

325

Bytes for External Sensor:

326

327

(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:310px" %)

328

|=(% style="width: 105px;background-color:#D9E2F3;color:#0070C0" %)**EXT # Value**|=(% style="width: 205px;background-color:#D9E2F3;color:#0070C0" %)**External Sensor Probe**

329

|(% style="width:103px" %)0x01|(% style="width:203px" %)Sensor AS-01, Temperature

=== 2.4.3 Uplink FPORT~=3, Datalog sensor value ===

334

335

336

LHT52 stores sensor value and user can retrieve these history value via downlink command. The Datalog sensor value are sent via FPORT=3.

337

338

[[image:image-20220621101659-8.png||height="515" width="1381"]](% style="display:none" %)

339

340

341

* Each data entry is 11 bytes, to save airtime and battery, LHT52 will send max bytes according to the current DR and Frequency bands.(% style="display:none" %)

342

343

For example, in US915 band, the max payload for different DR is:

344

345

1. **DR0**: max is 11 bytes so one entry of data

346

1. **DR1**: max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)

347

1. **DR2**: total payload includes 11 entries of data

348

1. **DR3**: total payload includes 22 entries of data.

349

350

(% style="color:red" %)**Notice: LHT52 will save 178 set of history data, If device doesn't have any data in the polling time. Device will uplink 11 bytes of 0.**

351

352

See more info about the [[Datalog feature>>||anchor="H2.6A0DatalogFeature"]].

353

354

355

=== 2.4.4 Uplink FPORT~=4, DS18B20 ID ===

356

357

358

User can get external DS18B20 ID through the downlink command.

Downlink: 0x2302

[[image:image-20220621101853-9.png||height="529" width="1366"]]

363

364

Example Payload (FPort=4): (% style="color:#037691" %)**28 86 63 B2 00 00 00 9F**

365

366

The External DS18B20 ID is 0x28 86 63 B2 00 00 00 9F

367

368

369

=== 2.4.5 Decoder in TTN V3 ===

370

371

372

In LoRaWAN protocol, the uplink payload is HEX format, user need to add a payload formatter/decoder in LoRaWAN Server to get human friendly string.

373

374

In TTN , add formatter as below:

375

376

[[image:image-20220621102026-10.png]]

(((

Please check the decoder from this link: [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]

)))

(((

)))

== 2.5 Show data on Datacake ==

(((

Datacake IoT platform provides a human friendly interface to show the sensor data in charts, once we have sensor data in TTN V3, we can use Datacake to connect to TTN V3 and see the data in Datacake. Below are the steps:

)))

(((

)))

(((

(% style="color:blue" %)**Step 1**(%%): Be sure that your device is programmed and properly connected to the LoRaWAN network.

)))

(((

(% style="color:blue" %)**Step 2**(%%): Configure your Application to forward data to Datacake you will need to add integration. Go to TTN V3 Console ~-~-> Applications ~-~-> Integrations ~-~-> Add Integrations.

)))

(((

~1. Add Datacake:

)))

(((

2. Select default key as Access Key:

)))

(((

3. In Datacake console ([[https:~~/~~/datacake.co/>>url:https://datacake.co/]]) , add LHT52:

)))

(((

Please refer to the figure below

)))

[[image:image-20220621112422-1.png]]

424

425

426

Log in to DATACAKE, copy the API under the account

427

428

[[image:image-20220621112422-2.png]]

429

430

431

[[image:image-20220621112422-3.png]]

[[image:image-20220621112422-4.png||height="741" width="1237"]]

436

437

438

[[image:image-20220621112422-5.png||height="314" width="1226"]]

439

440

441

[[image:image-20220621112422-6.png]]

442

443

444

[[image:image-20220621112422-7.png]]

445

446

[[image:image-20220621112422-8.png]]

447

448

449

[[image:image-20220621112422-9.png||height="338" width="1211"]]

450

451

452

[[image:image-20220621112422-10.png||height="372" width="1215"]]

Copy and paste the [[TTN decoder>>https://www.dropbox.com/sh/6ighqpavkd33gqi/AACPu62g--x0gBADvHZs_xr6a?dl=0]] here and save

457

458

[[image:image-20220621112422-11.png||height="575" width="1215"]]

459

460

461

Visual widgets please read the DATACAKE documentation

462

463

[[image:image-20220622154805-1.png]]

464

465

466

== 2.6 Datalog Feature ==

467

468

469

(% _msthash="315262" _msttexthash="32283004" _mstvisible="1" %)

470

When user want to retrieve sensor value, he can send a poll command from the IoT platform to ask sensor to send value in the required time slot.

471

472

473

=== 2.6.1 Unix TimeStamp ===

474

475

476

Unix TimeStamp shows the sampling time of uplink payload. format base on

477

478

[[image:image-20220523001219-11.png||_mstalt="450450" _mstvisible="3" height="97" width="627"]]

479

480

User can get this time from link: [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/||_mstvisible="3"]] :

481

482

For example: if the Unix Timestamp we got is hex 0x60137afd, we can convert it to Decimal: 1611889405. and then convert to the time: 2021 – Jan ~-~- 29 Friday 03:03:25 (GMT)

483

484

485

[[image:1655782409139-256.png]]

486

487

488

=== 2.6.2 Poll sensor value ===

(((

User can poll sensor value based on timestamps from the server. Below is the downlink command.

)))

(((

Timestamp start and Timestamp end use Unix TimeStamp format as mentioned above. Devices will reply with all data log during this time period, use the uplink interval.

)))

(((

For example, downlink command [[image:image-20220621113526-13.png]] (% _mstvisible="3" style="display:none" %)

)))

(((

Is to check 2020/12/1 07:40:00 to 2020/12/1 08:40:00's data

)))

(((

Uplink Internal =5s，means LHT52 will send one packet every 5s. range 5~~255s.

)))

=== 2.6.3 Datalog Uplink payload ===

513

514

515

See [[Uplink FPORT=3, Datalog sensor value>>||anchor="H2.4.3A0UplinkFPORT3D32CDatalogsensorvalue"]]

516

517

(% style="display:none" %) (%%)

== 2.7 Alarm Mode ==

(((

When device is in Alarm mode, it will check the built-in sensor temperature in a short interval. If the temperature exceeds the pre-configure range, it will send an uplink immediately.

)))

(((

The alarm mode can be modified by AT command or downlink, Alarm mode is disabled by default.

)))

(((

If you need to enable the Alarm mode, please refer to the following

)))

(((

(% style="color:red" %)**Note: Alarm mode will increase the power consumption, we recommend extending the normal uplink time (20 minutes default) when enable this feature.**

)))

(((

)))

(((

(% style="color:blue" %)**AT Commands for Alarm mode:**

)))

(((

(% style="color:#037691" %)**AT+WMOD=1**(%%)**: ** Enable/Disable Alarm Mode. (0:Disable, 1: Enable),need to reset the node to take effect

)))

(((

(% style="color:#037691" %)**AT+CITEMP=1**(%%)**: ** The interval to check temperature for Alarm. (Unit: minute)

)))

(((

(% style="color:#037691" %)**AT+ARTEMP=-40,125**(%%)**: ** Set the normal temperature range from -40°C to 125°C

)))

(((

Suppose you want to set the normal temperature from 15°C to 50°C, and turn on the alarm mode, and check the temperature every 2 minutes. Please refer to the following

560

)))

561

562

[[image:image-20220621114109-14.png]]

563

564

[[image:image-20220621114109-15.png]]

(((

Modification via downlink,Take TTN_V3 as an example((% style="color:red" %)downlink commands, please refer to the downlink command set for details(%%))

)))

(((

In order to ensure that the node is indeed modified by downlink, I reset the node to factory settings first.

573

)))

574

575

[[image:image-20220621114109-16.png]]

576

577

578

[[image:image-20220621114109-17.png||height="583" width="1274"]]

579

580

[[image:image-20220621114109-18.png]]

581

582

583

Or use a downlink directly: AA010002000F0032 ([[See command info>>||anchor="H3.1A0DownlinkCommandSet"]])

584

585

[[image:image-20220621114109-19.png||height="178" width="1292"]]

586

587

588

== 2.8 LED Indicator ==

(((

The LHT52 has a triple color LED which for easy showing different stage.

)))

(((

(% style="color:#037691" %)**In a normal working state**:

598

)))

599

600

* When the node is restarted, (% style="color:green" %)**GREEN, **(% style="color:red" %)**RED**(%%) and (% style="color:blue" %)**BLUE**(%%)** **are sequentially lit.

601

602

* During OTAA Join:

603

** **For each Join Request uplink:** the (% style="color:green" %)**GREEN LED** (%%)will blink once.

604

** **Once Join Successful:** the (% style="color:green" %)**GREEN LED**(%%) will be solid on for 5 seconds.

605

606

* After joined, for each uplink, the (% style="color:blue" %)**BLUE LED**(%%) or (% style="color:green" %)**GREEN LED** (%%)will blink once.

607

** (% style="color:blue" %)**BLUE LED**(%%) when external sensor is connected

608

** (% style="color:green" %)**GREEN LED**(%%) when external sensor is not connected

609

610

* For each success downlink, the (% style="color:purple" %)**PURPLE LED**(%%) will blink once

611

612

(((

613

(% style="color:#037691" %)**In AT Command Mode:**

)))

(((

If user use console cable to send AT Command to LHT52, the (% style="color:red" %)**RED LED**(%%) will always on until:

)))

* Power off/on LHT52

* Press reset button of LHT52.

622

* Send an AT Command: AT+CLPM=1

623

624

(% style="display:none" %) (%%)

== 2.9 Button ==

Press the button LHT52 will reset and join network again.

631

632

633

= 3. Configure LHT52 via AT command or LoRaWAN downlink =

634

635

636

Use can configure LHT52 via AT Command or LoRaWAN Downlink.

637

638

* AT Command Connection: See [[FAQ>>||anchor="H6.FAQ"]].

639

640

* LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>doc:Main.WebHome]]

641

642

There are two kinds of commands to configure LHT52, they are:

643

644

* (% style="color:#4f81bd" %)**General Commands:**

645

646

These commands are to configure:

647

648

* General system settings like: uplink interval.

649

650

* LoRaWAN protocol & radio-related commands.

651

652

They are the same for all Dragino Devices which supports DLWS-005 LoRaWAN Stack(Note~*~*). These commands can be found on the wiki: [[End Device Downlink Command>>doc:Main.End Device AT Commands and Downlink Command.WebHome]]

653

654

655

* (% style="color:#4f81bd" %)**Commands special design for LHT52**

656

657

These commands are only valid for LHT52, as below:

658

659

660

== 3.1 Downlink Command Set ==

661

662

663

(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)

664

|=(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 150px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)**Response**|=(% style="width: 150px;background-color:#D9E2F3;color:#0070C0" %)**Downlink**

665

|(% style="width:161px" %)AT+TDC=?|(% style="width:138px" %)View current TDC time|(% style="width:243px" %)(((

666

1200000

667

OK

668

)))|(% style="width:1001px" %)Default 1200000(ms)

669

|(% style="width:161px" %)AT+TDC=300000|(% style="width:138px" %)Set TDC time|(% style="width:243px" %)OK|(% style="width:1001px" %)(((

670

0X0100012C:

671

01: fixed command

672

00012C: 0X00012C=300(seconds)

673

)))

674

|(% style="width:161px" %)ATZ|(% style="width:138px" %)Reset node|(% style="width:243px" %) |(% style="width:1001px" %)0x04FF

675

|(% style="width:161px" %)AT+FDR|(% style="width:138px" %)Restore factory settings|(% style="width:243px" %) |(% style="width:1001px" %)0X04FE

676

|(% style="width:161px" %)AT+CFM=?|(% style="width:138px" %)View the current confirmation mode status|(% style="width:243px" %)(((

677

0

678

OK

679

)))|(% style="width:1001px" %)Default 0

680

|(% style="width:161px" %)AT+CFM=1|(% style="width:138px" %)Turn on confirmation mode|(% style="width:243px" %)OK|(% style="width:1001px" %)(((

0x0500: close

0x0501: open

05: fixed command

)))

|(% style="width:161px" %)AT+CHE=?|(% style="width:138px" %)View the current sub-band select 0-7, the default is 0|(% style="width:243px" %)(((

686

0

687

OK

688

)))|(% style="width:1001px" %)Default 0

689

|(% style="width:161px" %)AT+CHE=2|(% style="width:138px" %)(((

690

Set subband to 2

691

(CN470,US915,AU915)

692

)))|(% style="width:243px" %)(((

693

Attention:Take effect after ATZ

694

OK

695

)))|(% style="width:1001px" %)(((

0X0702:

07: fixed command

02: Select subband 2

)))

|(% style="width:161px" %)AT+WMOD=?|(% style="width:138px" %)View the current alarm mode status|(% style="width:243px" %)(((

701

0

702

OK

703

)))|(% style="width:1001px" %)Default 0

704

|(% style="width:161px" %)AT+WMOD=1|(% style="width:138px" %)Turn on alarm mode|(% style="width:243px" %)(((

705

Attention:Take effect after ATZ

706

OK

707

)))|(% style="width:1001px" %)(((

0xA501: open

0XA500: close

A5: fixed command

)))

|(% style="width:161px" %)AT+CITEMP=?|(% style="width:138px" %)View the current temperature detection time interval|(% style="width:243px" %)(((

713

1

714

OK

715

)))|(% style="width:1001px" %)Default 1(min)

716

|(% style="width:161px" %)AT+CITEMP=2|(% style="width:138px" %)Set the temperature detection time interval to 2min|(% style="width:243px" %)OK|(% style="width:1001px" %)(((

0XA70002

A7: fixed command

0002: 0X0002=2(min)

)))

|(% style="width:161px" %)AT+NJM=?|(% style="width:138px" %)Check the current network connection method|(% style="width:243px" %)(((

722

1

723

OK

724

)))|(% style="width:1001px" %)Default 1

725

|(% style="width:161px" %)AT+NJM=0|(% style="width:138px" %)Change the network connection method to ABP|(% style="width:243px" %)(((

726

Attention:Take effect after ATZ

727

OK

728

)))|(% style="width:1001px" %)(((

0X2000: ABP

0x2001: OTAA

20: fixed command

)))

|(% style="width:161px" %)AT+RPL=?|(% style="width:138px" %)View current RPL settings|(% style="width:243px" %)(((

734

0

735

OK

736

)))|(% style="width:1001px" %)Default 0

737

|(% style="width:161px" %)AT+RPL=1|(% style="width:138px" %)set RPL=1|(% style="width:243px" %)OK|(% style="width:1001px" %)(((

738

0x2101:

739

21: fixed command

740

01: for details, check wiki

741

)))

742

|(% style="width:161px" %)AT+ADR=?|(% style="width:138px" %)View current ADR status|(% style="width:243px" %)(((

743

1

744

OK

745

)))|(% style="width:1001px" %)Default 0

746

|(% style="width:161px" %)AT+ADR=0|(% style="width:138px" %)Set the ADR state to off|(% style="width:243px" %)OK|(% style="width:1001px" %)(((

0x2200: close

0x2201: open

22: fixed command

)))

|(% style="width:161px" %)AT+DR=?|(% style="width:138px" %)View the current DR settings|(% style="width:243px" %)OK|(% style="width:1001px" %)

752

|(% style="width:161px" %)AT+DR=1|(% style="width:138px" %)(((

753

set DR to 1

754

It takes effect only when ADR=0

755

)))|(% style="width:243px" %)OK|(% style="width:1001px" %)(((

0X22000101:

00: ADR=0

01: DR=1

01: TXP=1

22: fixed command

)))

|(% style="width:161px" %)AT+TXP=?|(% style="width:138px" %)View the current TXP|(% style="width:243px" %)OK|(% style="width:1001px" %)

763

|(% style="width:161px" %)AT+TXP=1|(% style="width:138px" %)(((

764

set TXP to 1

765

It takes effect only when ADR=0

766

)))|(% style="width:243px" %)OK|(% style="width:1001px" %)(((

0X22000101:

00: ADR=0

01: DR=1

01: TXP=1

22: fixed command

)))

|(% style="width:161px" %) |(% style="width:138px" %)Upload node configuration or DS18B20 ID|(% style="width:243px" %) |(% style="width:1001px" %)(((

774

0X2301:Upload node configuration

775

0x2302: Upload DS18B20 ID

776

23: fixed command

777

)))

778

|(% style="width:161px" %)AT+DWELL=?|(% style="width:138px" %)Check the high-rate upload settings|(% style="width:243px" %)(((

779

1

780

OK

781

)))|(% style="width:1001px" %)Default 1

782

|(% style="width:161px" %)AT+DWELL=1|(% style="width:138px" %)(((

783

Set high rate upload

784

(AS923,AU915)

785

)))|(% style="width:243px" %)(((

786

Attention:Take effect after ATZ

787

OK

788

)))|(% style="width:1001px" %)(((

0x2501: close

0x2500: open

25: fixed command

for details, check wiki

793

)))

794

|(% style="width:161px" %)AT+RJTDC=?|(% style="width:138px" %)View current RJTDC set time|(% style="width:243px" %)(((

795

20

796

OK

797

)))|(% style="width:1001px" %)Default 20(min)

798

|(% style="width:161px" %)AT+RJTDC=10|(% style="width:138px" %)Set RJTDC time interval|(% style="width:243px" %)OK|(% style="width:1001px" %)(((

0X26000A:

26: fixed command

000A: 0X000A=10(min)

for details, check wiki

803

)))

804

|(% style="width:161px" %) |(% style="width:138px" %)Retrieve stored data for a specified period of time|(% style="width:243px" %) |(% style="width:1001px" %)(((

805

0X3161DE7C7061DE8A800A:

806

31: fixed command

807

61DE7C70:0X61DE7C70=2022/1/12 15:00:00

808

61DE8A80:0X61DE8A80=2022/1/12 16:00:00

0A: 0X0A=10(second)

View details 2.6.2

)))

|(% style="width:161px" %)AT+DDETECT=?|(% style="width:138px" %)View the current DDETECT setting status and time|(% style="width:243px" %)(((

813

0,1440

814

OK

815

)))|(% style="width:1001px" %)Default 0,1440(min)

816

|(% style="width:161px" %)AT+DDETECT=1,1440|(% style="width:138px" %)(((

817

Set DDETECT setting status and time

818

((% style="color:red" %)When the node does not receive the downlink packet within the set time, it will re-enter the network(%%))

819

)))|(% style="width:243px" %)OK|(% style="width:1001px" %)(((

0X320005A0: close

0X320105A0: open

32: fixed command

05A0: 0X05A0=1440(min)

824

)))

825

|(% style="width:161px" %) |(% style="width:138px" %)(((

826

Downlink Modification Alarm Mode

827

(AT+WMOD,AT+CITEMP,AT+ARTEMP)

828

)))|(% style="width:243px" %) |(% style="width:1001px" %)(((

0XAA010002000F00032:

AA: fixed command

01: 0X01=1(AT+MOD)

0002: 0X0002=2(AT+CITEMP)

833

000F: 0X000F=15(AT+ARTEMP)

834

0032: 0X0032=50(AT+ARTEMP)

)))

== 3.2 Set Password ==

840

841

842

Feature: Set device password, max 9 digits.

843

844

(% style="color:#4f81bd" %)**AT Command: AT+PWORD**

845

846

(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:372px" %)

847

|(% style="background-color:#d9e2f3; color:#0070c0; width:155px" %)**Command Example**|(% style="background-color:#d9e2f3; color:#0070c0; width:128px" %)**Function**|(% style="background-color:#d9e2f3; color:#0070c0; width:89px" %)**Response**

848

|(% style="width:155px" %)AT+PWORD=?|(% style="width:124px" %)Show password|(% style="width:86px" %)(((

123456

OK

)))

|(% style="width:155px" %)AT+PWORD=999999|(% style="width:124px" %)Set password|(% style="width:86px" %)OK

853

854

(% style="color:#4f81bd" %)**Downlink Command:**

855

856

No downlink command for this feature.

857

858

859

= 4. Battery & How to replace =

860

861

== 4.1 Battery Type and replace ==

862

863

864

LHT52 uses 2 x AAA LR03(1.5v) batteries. If the batteries running low (shows 2.1v in the platform). User can buy generic AAA battery and replace it.

865

866

867

(% style="color:red" %)**Note: **

868

869

1. The LHT52 doesn't have any screw, use can use nail to open it by the middle.

870

871

[[image:image-20220621143535-5.png]]

872

873

874

2. Make sure the direction is correct when install the AAA batteries.

875

876

[[image:image-20220621143535-6.png]]

877

878

879

== 4.2 Power Consumption Analyze ==

880

881

882

Dragino battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.

883

884

Instruction to use as below:

885

886

(% style="color:blue" %)**Step 1**(%%): Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from:

887

888

[[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]

889

890

891

(% style="color:blue" %)**Step 2**(%%): (% style="display:none" %) (%%)Open it and choose

* Product Model

* Uplink Interval

* Working Mode

And the Life expectation in difference case will be shown on the right.

898

899

[[image:image-20220621143643-7.png||height="429" width="1326"]]

900

901

902

= 5. Sensors and Accessories =

903

904

== 5.1 Temperature Probe (AS-01) ==

905

906

907

External Temperature Probe base on DS18B20. (note: Default Package doesn't include AS-01)

908

909

[[image:image-20220621141939-4.png||height="315" width="279"]] [[image:image-20220621141546-2.png||height="308" width="205"]](% style="display:none" %)

910

911

912

**External Temperature Probe (AS-01):(% style="display:none" %) (%%)**

913

914

* Resolution: 0.0625 °C

915

* ±0.5°C accuracy from -10°C to +85°C

916

* ±2°C accuracy from -55°C to +125°C

917

* Operating Range: -55 °C ~~ 125 °C

918

* Cable Length: 2 meters

== 5.2 Program Converter (AS-02) ==

923

924

925

AS-02 is an optional accessory, it is USB Type-C converter. AS-02 provide below feature:

926

927

1. Access AT console of LHT52 when used with USB-TTL adapter. [[See this link>>||anchor="H6.1HowtouseATCommandtoconfigureLHT52"]].

928

1. Update firmware to LHT52 when used with DAP-Link adapter. [[See this link>>doc:Main.Firmware Upgrade Instruction.WebHome||anchor="H2.3LHT52"]].

929

930

[[image:image-20220621141724-3.png]]

= 6. FAQ =

== 6.1 How to use AT Command to configure LHT52 ==

936

937

938

LHT52 supports AT Command set. User can use a USB to TTL adapter plus the Program Cable to connect to LHT52 for using AT command, as below.

939

940

941

[[image:image-20220621144150-8.png||height="537" width="724"]]

**Connection:**

* (% style="background-color:yellow" %)USB to TTL GND <~-~-> Program Converter GND pin

947

* (% style="background-color:yellow" %)USB to TTL RXD <~-~-> Program Converter D+ pin

948

* (% style="background-color:yellow" %)USB to TTL TXD <~-~-> Program Converter A11 pin

949

950

It is also possible to connect using DAPLink

951

952

[[image:image-20220621144235-9.png||height="485" width="729"]]

(((

**Connection:**

)))

* (((

(% style="background-color:yellow" %)USB to DAP-LINK GND <~-~-> Program Converter GND pin

960

)))

961

* (((

962

(% style="background-color:yellow" %)USB to DAP-LINK RXD <~-~-> Program Converter D+ pin

963

)))

964

* (((

965

(% style="background-color:yellow" %)USB to DAP-LINK TXD <~-~-> Program Converter A11 pin

)))

(((

In PC, User needs to set **serial tool**(such as [[putty>>url:https://www.chiark.greenend.org.uk/~~sgtatham/putty/latest.html]], SecureCRT) baud rate to (% style="color:green" %)**115200**(%%) to access to access serial console for LHT52. The AT commands are disable by default and need to enter password (default:(% style="color:green" %)**123456**(%%)) to active it. Timeout to input AT Command is 5 min, after 5-minute, user need to input password again.

)))

(((

Input password and ATZ to activate LHT52,As shown below:

)))

[[image:image-20220621144235-10.png]]

980

981

982

== 6.2 AT Command and Downlink ==

(((

Sending ATZ will reboot the node

)))

(((

Sending AT+FDR will restore the node to factory settings

)))

(((

Get the node's AT command setting by sending AT+CFG

)))

(((

)))

(((

**Example：**

)))

(((

AT+VER=EU868 v1.0

)))

(((

AT+NJM=1

)))

(((

AT+DEUI=25 32 12 45 65 26 12 35

)))

(((

AT+APPEUI=25 32 12 45 65 26 32 16

)))

(((

AT+APPKEY=25 32 12 45 65 26 32 16 89 48 85 65 45 87 89 55

)))

(((

AT+DADDR=00 00 00 00

)))

(((

AT+APPSKEY=00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

)))

(((

AT+NWKSKEY=00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

)))

(((

AT+NWKID=00 00 00 13

)))

(((

AT+ADR=1

)))

(((

AT+DR=5

)))

(((

AT+TXP=1

)))

(((

AT+CHS=0

)))

(((

AT+CLASS=A

)))

(((

AT+CFM=0

)))

(((

AT+JN1DL=5000

)))

(((

AT+JN2DL=6000

)))

(((

AT+RX1DL=5000

)))

(((

AT+RX2DL=6000

)))

(((

AT+RX1WTO=24

)))

(((

AT+RX2WTO=6

)))

(((

AT+RX2FQ=869525000

)))

(((

AT+RX2DR=0

)))

(((

AT+RPL=0

)))

(((

AT+FCU=6

)))

(((

AT+FCD=0

)))

(((

AT+CFS=0

)))

(((

AT+NJS=1

)))

(((

AT+DCS=0

)))

(((

AT+PNM=1

)))

(((

AT+PWORD=123456

)))

(((

AT+EXT=1

)))

(((

AT+TDC=120000

)))

(((

AT+TIMESTAMP=1640851037 2021 12 30 7 57 17

)))

(((

AT+RJTDC=20

)))

(((

AT+DDETECT=0,1440

)))

(((

AT+WMOD=0

)))

(((

AT+CITEMP=1

)))

(((

AT+ARTEMP=-40,125

)))

(((

Send AT+PDTA=? to get the stored 174 data

)))

(((

**Example：**

)))

[[image:image-20220621144804-11.png]]

1171

1172

1173

== 6.3 How to upgrade the firmware? ==

1174

1175

1176

LHT52 requires a program converter to upload images to LHT52, which is used to upload image to LHT52 for:

1177

1178

* Support new features

1179

* For bug fix

1180

* Change LoRaWAN bands.

1181

1182

(((

1183

User can check this link for the detail of operation of firmware upgrade: [[Firmware Upgrade Instruction>>doc:Main.Firmware Upgrade Instruction.WebHome||anchor="H2.3LHT52"]]

)))

== 6.4 How to change the LoRa Frequency Bands/Region? ==

1188

1189

1190

User can follow the introduction for [[how to upgrade image>>||anchor="H6.3A0Howtoupgradethefirmware3F"]]. When download the images, choose the required image file for download.

= 7. Order Info =

== 7.1 Main Device ==

(((

Part Number: (% style="color:#4472c4" %)**LHT65N-XX**

)))

(((

(% style="color:#4472c4" %)**XX **(%%): The default frequency band

1204

)))

1205

1206

* (% style="color:red" %)**AS923**(%%)**: **LoRaWAN AS923 band

1207

* (% style="color:red" %)**AU915**(%%)**: **LoRaWAN AU915 band

1208

* (% style="color:red" %)**EU433**(%%)**: **LoRaWAN EU433 band

1209

* (% style="color:red" %)**EU868**(%%)**:** LoRaWAN EU868 band

1210

* (% style="color:red" %)**KR920**(%%)**: **LoRaWAN KR920 band

1211

* (% style="color:red" %)**US915**(%%)**: **LoRaWAN US915 band

1212

* (% style="color:red" %)**IN865**(%%)**: **LoRaWAN IN865 band

1213

* (% style="color:red" %)**CN470**(%%)**: **LoRaWAN CN470 band

== 7.2 Accessories ==

1218

1219

1220

(% style="color:red" %)**Note: below accessories are not include in the main device package, need to order separately.**

1221

1222

**Temperature Probe: (% style="color:red" %)AS-01(%%)**

1223

1224

**Program Converter: (% style="color:red" %)AS-02(%%)**

= 8. Packing Info =

**Package Includes**:

1231

1232

* LHT52 Temperature & Humidity Sensor x 1

= 9. Support =

* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.

1240

* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]].

= 10. Reference material =

1245

1246

1247

* [[Datasheet, photos, decoder, firmware>>https://www.dropbox.com/sh/ucgxio6zltajlxg/AACxr_XyH4Cy7gevG293k4zqa?dl=0]]

1248

1249

1250