LHT52 - LoRaWAN Temperature & Humidity Sensor User Manual

The Dragino LHT52 Temperature & Humidity sensor is a Long Range LoRaWAN Sensor. It includes a (% style="color:blue" %)**built-in Temperature & Humidity sensor** (%%)and has a USB Type-C sensor connector to connect to external sensors such as external Temperature Sensor.

26

)))

27

28

(((

29

LHT52 (% style="color:blue" %)**senses environment temperature and humidity**(%%) and send these values via long-range wireless LoRaWAN protocol. It targets professional wireless sensor network applications such as food service, smart metering, smart cities, building automation, and so on.

)))

(((

LHT52 supports(% style="color:blue" %)** 2 x AAA batteries **(%%)and works for a long time up to several years. Use can replace the batteries easily after they are finished.

)))

(((

LHT52 is fully compatible with LoRaWAN v1.0.3 protocol, it can work with standard LoRaWAN gateway.

)))

(((

LHT52 supports(% style="color:blue" %)** Datalog feature** (%%)to make sure users won't miss sensor data. It records sensor value for every uplink. These values can be retrieved by LoRaWAN server via downlink command.

)))

(((

LHT52 supports(% style="color:blue" %)** temperature alarm feature**(%%). It can uplink alarm in a short interval while temperature exceeds preset limits.

)))

(((

*Battery life depends how often to send data, please see [[battery analyzer>>||anchor="H4.2A0PowerConsumptionAnalyze"]].

50

)))

51

52

[[image:1655774519494-861.png]]

== 1.2 Features ==

* Wall Attachable.

* LoRaWAN v1.0.3 Class A protocol.

60

* Built-in Temperature & Humidity sensor

61

* Optional External Probe

62

* Frequency Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915

63

* AT Commands to change parameters

64

* Remote configure parameters via LoRaWAN Downlink

65

* Firmware upgradable via program port

66

* Support 2 x AAA LR03 batteries.

* Datalog feature

* IP Rating: IP52

== 1.3 Specification ==

73

74

75

**Built-in Temperature Sensor:**

76

77

* Resolution: 0.01 °C

78

* Accuracy Tolerance: Typ ±0.3 °C

79

* Long Term Drift: < 0.02 °C/yr

80

* Operating Range: -20 ~~ 50 °C

81

82

**Built-in Humidity Sensor:**

83

84

* Resolution: 0.1 %RH

85

* Accuracy Tolerance: Typ ±3 %RH

86

* Long Term Drift: < 0.02 °C/yr

87

* Operating Range: 0 ~~ 99.0 %RH(no Dew)

== 1.4 Power Consumption ==

92

93

94

LHT52 (without external sensor): Idle: 5uA, Transmit: max 110mA

95

96

LHT52 + External Temperature Probe (AS-01): Idle: 6uA, Transmit: max 110mA.

97

98

99

== 1.5 Storage & Operation Temperature ==

-20°C to +50°C

== 1.6 Applications ==

106

107

108

* Smart Buildings & Home Automation

109

* Logistics and Supply Chain Management

* Smart Metering

* Smart Agriculture

* Smart Cities

* Smart Factory

= 2. Operation Mode =

118

119

== 2.1 How it work? ==

120

121

122

Each LHT52 is shipped with a worldwide unique set of LoRaWAN OTAA keys. To use LHT52 in a LoRaWAN network, user needs to input the OTAA keys in LoRaWAN network server. After this, if LHT52 is under this LoRaWAN network coverage, LHT52 can join the LoRaWAN network and start to transmit sensor data. The default period for each uplink is** 20 minutes**.

123

124

125

== 2.2 How to Activate LHT52? ==

126

127

128

(% style="color:red" %)** 1. Open enclosure from below position.**

129

130

[[image:image-20220621093835-1.png]]

131

132

133

(% style="color:red" %)** 2. Insert 2 x AAA LR03 batteries.**

134

135

[[image:image-20220621093835-2.png]]

136

137

138

(% style="color:red" %)** 3. Press the reset button to activate device.**

139

140

[[image:image-20220621093835-3.png]]

141

142

143

User can check [[LED Status>>||anchor="H2.8LEDIndicator"]] to know the working state of LHT52.

144

145

146

== 2.3 Example to join LoRaWAN network ==

147

148

149

This section shows an example for how to join the [[TheThingsNetwork>>url:https://www.thethingsnetwork.org/]] LoRaWAN IoT server. Usages with other LoRaWAN IoT servers are of similar procedure.

150

151

152

(% _mstvisible="1" class="wikigeneratedid" %)

153

[[image:1655775912928-657.png]]

154

155

Assume the DLOS8 is already set to connect to [[TTN V3 network >>url:https://eu1.cloud.thethings.network/]]. We need to add the LHT52 device in TTN V3 portal.

156

157

158

(% style="color:blue" %)**Step 1**(%%): Create a device in TTN V3 with the OTAA keys from LHT52.

159

160

Each LHT52 is shipped with a sticker with the default DEV EUI as below:

161

162

163

[[image:image-20220617150003-1.jpeg]]

164

165

166

Enter these keys in the LoRaWAN Server portal. Below is TTN V3 screen shot:

167

168

Add APP EUI in the application.

169

170

choose to create the device manually.

171

172

Add APP KEY and DEV EUI

173

174

175

[[image:image-20220522232916-3.png||_mstalt="430495" _mstvisible="3"]]

176

177

[[image:1655776122894-257.png]]

**Default mode OTAA**

182

183

184

[[image:1655776241177-240.png]]

(% style="color:blue" %)**Step 2**(%%): Use ACT button to activate LHT52 and it will auto join to the TTN V3 network. After join success, it will start to upload sensor data to TTN V3 and user can see in the panel.

189

190

191

[[image:image-20220621095134-4.png]]

192

193

194

== 2.4 Uplink Payload ==

195

196

197

Uplink payloads include two types: Valid Sensor Value and other status / control command.

198

199

* Valid Sensor Value: Use FPORT=2

200

* Other control command: Use FPORT other than 2.

=== 2.4.1 Uplink FPORT~=5, Device Status ===

205

206

207

Uplink the device configures with FPORT=5. Once LHT52 Joined the network, it will uplink this message to the server. After first uplink, LHT52 will uplink Device Status every 12 hours.

208

209

(% border="1" cellspacing="4" style="background-color:#ffffcc; color:green; width:370px" %)

[[image:image-20220621100550-5.png]]

214

215

Example Payload (FPort=5): [[image:image-20220621105116-11.png]]

216

217

218

(% style="color:#4472c4" %)**Sensor Model**(%%): For LHT52, this value is 0x09.

219

220

(% style="color:#4472c4" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version.

221

222

(% style="color:#4472c4" %)**Frequency Band**:

*0x01: EU868

*0x02: US915

*0x03: IN865

*0x04: AU915

*0x05: KZ865

*0x06: RU864

*0x07: AS923

*0x08: AS923-1

*0x09: AS923-2

*0x0a: AS923-3

(% style="color:#4472c4" %)**Sub-Band**(%%): value 0x00 ~~ 0x08(only for CN470, AU915,US915. Others are0x00)

246

247

(% style="color:#4472c4" %)**BAT**(%%): shows the battery voltage for LHT52.

Ex1: 0x0B3A = 2874mV

Use can also get the Device Status uplink through the downlink command:

253

254

(% style="color:#4472c4" %)**Downlink: 0x2301**

255

256

257

[[image:image-20220621100550-6.png||height="504" width="1491"]]

258

259

260

=== 2.4.2 Uplink FPORT~=2, Real time sensor value ===

261

262

263

LHT52 will send this uplink after Device Status uplink once join LoRaWAN network successfully. And it will periodically send this uplink. Default interval is 20 minutes and [[can be changed>>||anchor="H3.1A0DownlinkCommandSet"]].

264

265

Uplink uses FPORT=2 and every 20 minutes send one uplink by default.

266

267

(% border="1" cellspacing="4" style="background-color:#ffffcc; color:green; width:390px" %)

268

|=(% style="width: 60px;" %)(((

269

**Size(bytes)**

270

)))|=(% style="width: 60px;" %)(((

271

**2**

272

)))|=(% style="width: 60px;" %)(((

273

**2**

274

)))|=(% style="width: 90px;" %)(((

275

**2**

276

)))|=(% style="width: 40px;" %)(((

277

**1**

278

)))|=(% style="width: 80px;" %)(((

279

**4**

280

)))

281

|(% style="width:97px" %)(((

282

**Value**

283

)))|(% style="width:39px" %)(((

284

[[Temperature>>||anchor="HTemperature26ExternalTemperature:"]]

285

)))|(% style="width:100px" %)(((

286

(((

287

[[Humidity>>||anchor="HHumidity:"]]

288

)))

289

)))|(% style="width:77px" %)(((

290

(((

291

[[External Temperature>>||anchor="HTemperature26ExternalTemperature:"]]

292

)))

293

)))|(% style="width:47px" %)(((

294

[[Ext>>||anchor="HExtension23" _msthash="1817486"]] #

295

)))|(% style="width:51px" %)(((

296

[[Unix TimeStamp>>||anchor="H2.6.1A0UnixTimeStamp"]]

)))

**Temperature:**

[[image:image-20220621101526-7.png]]

302

303

Example Payload (FPort=2): (% style="background-color:yellow" %)**08 CD 02 20 7F FF 01 61 CD 4E DD**

304

305

306

==== (% style="color:blue" %)**Temperature & External Temperature:**(%%) ====

307

308

309

* Example1: 0x08CD/100=22.53℃

310

* Example2: (0xF5C6-65536)/100=-26.18℃

311

312

If payload is: F5C6 : (F5C6 & 8000 == 1) , temp = (F5C6 - 65536)/100 =-26.18℃

313

314

（F5C6 & 8000：Judge whether the highest bit is 1, when the highest bit is 1, it is negative）

315

316

317

==== (% style="color:blue" %)**Humidity:**(%%) ====

318

319

320

* Humidity: 0x0220/10=54.4%

==== (% style="color:blue" %)**Extension #**(%%) ====

325

326

327

Bytes for External Sensor:

328

329

(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:310px" %)

330

|=(% style="width: 103px;" %)**EXT # Value**|=(% style="width: 203px;" %)**External Sensor Probe**

331

|(% style="width:103px" %)0x01|(% style="width:203px" %)Sensor AS-01, Temperature

=== 2.4.3 Uplink FPORT~=3, Datalog sensor value ===

336

337

338

LHT52 stores sensor value and user can retrieve these history value via downlink command. The Datalog sensor value are sent via FPORT=3.

339

340

[[image:image-20220621101659-8.png||height="515" width="1381"]](% style="display:none" %)

341

342

343

* Each data entry is 11 bytes, to save airtime and battery, LHT52 will send max bytes according to the current DR and Frequency bands.(% style="display:none" %)

344

345

For example, in US915 band, the max payload for different DR is:

346

347

1. DR0: max is 11 bytes so one entry of data

348

1. DR1: max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)

349

1. DR2: total payload includes 11 entries of data

350

1. DR3: total payload includes 22 entries of data.

351

352

(% style="color:red" %)**Notice: LHT52 will save 178 set of history data, If device doesn't have any data in the polling time. Device will uplink 11 bytes of 0.**

353

354

See more info about the [[Datalog feature>>||anchor="H2.6A0DatalogFeature"]].

355

356

357

=== 2.4.4 Uplink FPORT~=4, DS18B20 ID ===

358

359

360

User can get external DS18B20 ID through the downlink command.

Downlink: 0x2302

[[image:image-20220621101853-9.png||height="529" width="1366"]]

365

366

Example Payload (FPort=4): (% style="color:#037691" %)**28 86 63 B2 00 00 00 9F**

367

368

The External DS18B20 ID is 0x28 86 63 B2 00 00 00 9F

369

370

371

=== 2.4.5 Decoder in TTN V3 ===

372

373

374

In LoRaWAN protocol, the uplink payload is HEX format, user need to add a payload formatter/decoder in LoRaWAN Server to get human friendly string.

375

376

In TTN , add formatter as below:

377

378

[[image:image-20220621102026-10.png]]

(((

Please check the decoder from this link: [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]

)))

(((

)))

== 2.5 Show data on Datacake ==

(((

Datacake IoT platform provides a human friendly interface to show the sensor data in charts, once we have sensor data in TTN V3, we can use Datacake to connect to TTN V3 and see the data in Datacake. Below are the steps:

)))

(((

)))

(((

(% style="color:blue" %)**Step 1**(%%): Be sure that your device is programmed and properly connected to the LoRaWAN network.

)))

(((

(% style="color:blue" %)**Step 2**(%%): Configure your Application to forward data to Datacake you will need to add integration. Go to TTN V3 Console ~-~-> Applications ~-~-> Integrations ~-~-> Add Integrations.

)))

(((

~1. Add Datacake:

)))

(((

2. Select default key as Access Key:

)))

(((

3. In Datacake console ([[https:~~/~~/datacake.co/>>url:https://datacake.co/]]) , add LHT52:

)))

(((

Please refer to the figure below

)))

[[image:image-20220621112422-1.png]]

426

427

428

Log in to DATACAKE, copy the API under the account

429

430

[[image:image-20220621112422-2.png]]

431

432

433

[[image:image-20220621112422-3.png]]

[[image:image-20220621112422-4.png||height="741" width="1237"]]

438

439

440

[[image:image-20220621112422-5.png||height="314" width="1226"]]

441

442

443

[[image:image-20220621112422-6.png]]

444

445

446

[[image:image-20220621112422-7.png]]

447

448

[[image:image-20220621112422-8.png]]

449

450

451

[[image:image-20220621112422-9.png||height="338" width="1211"]]

452

453

454

[[image:image-20220621112422-10.png||height="372" width="1215"]]

Copy and paste the [[TTN decoder>>https://www.dropbox.com/sh/6ighqpavkd33gqi/AACPu62g--x0gBADvHZs_xr6a?dl=0]] here and save

459

460

[[image:image-20220621112422-11.png||height="575" width="1215"]]

461

462

463

Visual widgets please read the DATACAKE documentation

464

465

[[image:image-20220622154805-1.png]]

466

467

468

== 2.6 Datalog Feature ==

469

470

471

(% _msthash="315262" _msttexthash="32283004" _mstvisible="1" %)

472

When user want to retrieve sensor value, he can send a poll command from the IoT platform to ask sensor to send value in the required time slot.

473

474

475

=== 2.6.1 Unix TimeStamp ===

476

477

478

Unix TimeStamp shows the sampling time of uplink payload. format base on

479

480

[[image:image-20220523001219-11.png||_mstalt="450450" _mstvisible="3" height="97" width="627"]]

481

482

User can get this time from link: [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/||_mstvisible="3"]] :

483

484

For example: if the Unix Timestamp we got is hex 0x60137afd, we can convert it to Decimal: 1611889405. and then convert to the time: 2021 – Jan ~-~- 29 Friday 03:03:25 (GMT)

485

486

487

[[image:1655782409139-256.png]]

488

489

490

=== 2.6.2 Poll sensor value ===

(((

User can poll sensor value based on timestamps from the server. Below is the downlink command.

)))

(((

Timestamp start and Timestamp end use Unix TimeStamp format as mentioned above. Devices will reply with all data log during this time period, use the uplink interval.

)))

(((

For example, downlink command [[image:image-20220621113526-13.png]] (% _mstvisible="3" style="display:none" %)

)))

(((

Is to check 2020/12/1 07:40:00 to 2020/12/1 08:40:00's data

)))

(((

Uplink Internal =5s，means LHT52 will send one packet every 5s. range 5~~255s.

)))

=== 2.6.3 Datalog Uplink payload ===

515

516

517

See [[Uplink FPORT=3, Datalog sensor value>>||anchor="H2.4.3A0UplinkFPORT3D32CDatalogsensorvalue"]]

518

519

(% style="display:none" %) (%%)

== 2.7 Alarm Mode ==

(((

When device is in Alarm mode, it will check the built-in sensor temperature in a short interval. If the temperature exceeds the pre-configure range, it will send an uplink immediately.

)))

(((

The alarm mode can be modified by AT command or downlink, Alarm mode is disabled by default.

)))

(((

If you need to enable the Alarm mode, please refer to the following

)))

(((

(% style="color:red" %)**Note: Alarm mode will increase the power consumption, we recommend extending the normal uplink time (20 minutes default) when enable this feature.**

)))

(((

)))

(((

(% style="color:blue" %)**AT Commands for Alarm mode:**

)))

(((

(% style="color:#037691" %)**AT+WMOD=1**(%%)**: ** Enable/Disable Alarm Mode. (0:Disable, 1: Enable),need to reset the node to take effect

)))

(((

(% style="color:#037691" %)**AT+CITEMP=1**(%%)**: ** The interval to check temperature for Alarm. (Unit: minute)

)))

(((

(% style="color:#037691" %)**AT+ARTEMP=-40,125**(%%)**: ** Set the normal temperature range from -40°C to 125°C

)))

(((

Suppose you want to set the normal temperature from 15°C to 50°C, and turn on the alarm mode, and check the temperature every 2 minutes. Please refer to the following

562

)))

563

564

[[image:image-20220621114109-14.png]]

565

566

[[image:image-20220621114109-15.png]]

(((

Modification via downlink,Take TTN_V3 as an example((% style="color:red" %)downlink commands, please refer to the downlink command set for details(%%))

)))

(((

In order to ensure that the node is indeed modified by downlink, I reset the node to factory settings first.

575

)))

576

577

[[image:image-20220621114109-16.png]]

578

579

580

[[image:image-20220621114109-17.png||height="583" width="1274"]]

581

582

[[image:image-20220621114109-18.png]]

583

584

585

Or use a downlink directly: AA010002000F0032 ([[See command info>>||anchor="H3.1A0DownlinkCommandSet"]])

586

587

[[image:image-20220621114109-19.png||height="178" width="1292"]]

588

589

590

== 2.8 LED Indicator ==

(((

The LHT52 has a triple color LED which for easy showing different stage.

)))

(((

(% style="color:#037691" %)**In a normal working state**:

600

)))

601

602

* When the node is restarted, (% style="color:green" %)**GREEN, **(% style="color:red" %)**RED**(%%) and (% style="color:blue" %)**BLUE**(%%)** **are sequentially lit.

603

604

* During OTAA Join:

605

** **For each Join Request uplink:** the (% style="color:green" %)**GREEN LED** (%%)will blink once.

606

** **Once Join Successful:** the (% style="color:green" %)**GREEN LED**(%%) will be solid on for 5 seconds.

607

608

* After joined, for each uplink, the (% style="color:blue" %)**BLUE LED**(%%) or (% style="color:green" %)**GREEN LED** (%%)will blink once.

609

** (% style="color:blue" %)**BLUE LED**(%%) when external sensor is connected

610

** (% style="color:green" %)**GREEN LED**(%%) when external sensor is not connected

611

612

* For each success downlink, the (% style="color:purple" %)**PURPLE LED**(%%) will blink once

613

614

(((

615

(% style="color:#037691" %)**In AT Command Mode:**

)))

(((

If user use console cable to send AT Command to LHT52, the (% style="color:red" %)**RED LED**(%%) will always on until:

)))

* Power off/on LHT52

* Press reset button of LHT52.

624

* Send an AT Command: AT+CLPM=1

625

626

(% style="display:none" %) (%%)

== 2.9 Button ==

Press the button LHT52 will reset and join network again.

633

634

635

= 3. Configure LHT52 via AT command or LoRaWAN downlink =

636

637

638

Use can configure LHT52 via AT Command or LoRaWAN Downlink.

639

640

* AT Command Connection: See [[FAQ>>||anchor="H6.FAQ"]].

641

642

* LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>doc:Main.WebHome]]

643

644

There are two kinds of commands to configure LHT52, they are:

645

646

* (% style="color:#4f81bd" %)**General Commands:**

647

648

These commands are to configure:

649

650

* General system settings like: uplink interval.

651

652

* LoRaWAN protocol & radio-related commands.

653

654

They are the same for all Dragino Devices which supports DLWS-005 LoRaWAN Stack(Note~*~*). These commands can be found on the wiki: [[End Device Downlink Command>>doc:Main.End Device AT Commands and Downlink Command.WebHome]]

655

656

657

* (% style="color:#4f81bd" %)**Commands special design for LHT52**

658

659

These commands are only valid for LHT52, as below:

660

661

662

== 3.1 Downlink Command Set ==

663

664

665

(% border="1" cellpadding="0" cellspacing="10" style="background-color:#ffffcc; color:green; width:500px" %)

666

|=(% style="width: 100px;" %)**Command Example**|=(% style="width: 150px;" %)**Function**|=(% style="width: 100px;" %)**Response**|=(% style="width: 150px;" %)**Downlink**

667

|(% style="width:161px" %)AT+TDC=?|(% style="width:138px" %)View current TDC time|(% style="width:243px" %)(((

1200000

OK

)))|(% style="width:1001px" %)Default 1200000(ms)

673

|(% style="width:161px" %)AT+TDC=300000|(% style="width:138px" %)Set TDC time|(% style="width:243px" %)OK|(% style="width:1001px" %)(((

0X0100012C:

01:fixed command

00012C:0X00012C=300(seconds)

679

)))

680

|(% style="width:161px" %)ATZ|(% style="width:138px" %)Reset node|(% style="width:243px" %) |(% style="width:1001px" %)0x04FF

681

|(% style="width:161px" %)AT+FDR|(% style="width:138px" %)Restore factory settings|(% style="width:243px" %) |(% style="width:1001px" %)0X04FE

682

|(% style="width:161px" %)AT+CFM=?|(% style="width:138px" %)View the current confirmation mode status|(% style="width:243px" %)(((

0

OK

)))|(% style="width:1001px" %)Default 0

687

|(% style="width:161px" %)AT+CFM=1|(% style="width:138px" %)Turn on confirmation mode|(% style="width:243px" %)OK|(% style="width:1001px" %)(((

0x0500:close

0x0501:open

05:fixed command

)))

|(% style="width:161px" %)AT+CHE=?|(% style="width:138px" %)View the current sub-band select 0-7, the default is 0|(% style="width:243px" %)(((

0

OK

)))|(% style="width:1001px" %)Default 0

699

|(% style="width:161px" %)AT+CHE=2|(% style="width:138px" %)(((

Set subband to 2

(CN470,US915,AU915)

)))|(% style="width:243px" %)(((

704

Attention:Take effect after ATZ

OK

)))|(% style="width:1001px" %)(((

0X0702:

07:fixed command

02:Select subband 2

)))

|(% style="width:161px" %)AT+WMOD=?|(% style="width:138px" %)View the current alarm mode status|(% style="width:243px" %)(((

0

OK

)))|(% style="width:1001px" %)Default 0

721

|(% style="width:161px" %)AT+WMOD=1|(% style="width:138px" %)Turn on alarm mode|(% style="width:243px" %)(((

722

Attention:Take effect after ATZ

OK

)))|(% style="width:1001px" %)(((

0xA501:open

0XA500:close

A5:fixed command

)))

|(% style="width:161px" %)AT+CITEMP=?|(% style="width:138px" %)View the current temperature detection time interval|(% style="width:243px" %)(((

1

OK

)))|(% style="width:1001px" %)Default 1(min)

741

|(% style="width:161px" %)AT+CITEMP=2|(% style="width:138px" %)Set the temperature detection time interval to 2min|(% style="width:243px" %)OK|(% style="width:1001px" %)(((

0XA70002

A7:fixed command

0002:0X0002=2(min)

)))

|(% style="width:161px" %)AT+NJM=?|(% style="width:138px" %)Check the current network connection method|(% style="width:243px" %)(((

1

OK

)))|(% style="width:1001px" %)Default 1

753

|(% style="width:161px" %)AT+NJM=0|(% style="width:138px" %)Change the network connection method to ABP|(% style="width:243px" %)(((

754

Attention:Take effect after ATZ

OK

)))|(% style="width:1001px" %)(((

0X2000:ABP

0x2001:OTAA

20:fixed command

)))

|(% style="width:161px" %)AT+RPL=?|(% style="width:138px" %)View current RPL settings|(% style="width:243px" %)(((

0

OK

)))|(% style="width:1001px" %)Default 0

773

|(% style="width:161px" %)AT+RPL=1|(% style="width:138px" %)set RPL=1|(% style="width:243px" %)OK|(% style="width:1001px" %)(((

0x2101:

21:fixed command

01:for details, check wiki

779

)))

780

|(% style="width:161px" %)AT+ADR=?|(% style="width:138px" %)View current ADR status|(% style="width:243px" %)(((

1

OK

)))|(% style="width:1001px" %)Default 0

785

|(% style="width:161px" %)AT+ADR=0|(% style="width:138px" %)Set the ADR state to off|(% style="width:243px" %)OK|(% style="width:1001px" %)(((

0x2200:close

0x2201:open

22:fixed command

)))

|(% style="width:161px" %)AT+DR=?|(% style="width:138px" %)View the current DR settings|(% style="width:243px" %)OK|(% style="width:1001px" %)

793

|(% style="width:161px" %)AT+DR=1|(% style="width:138px" %)(((

794

set DR to 1

795

796

It takes effect only when ADR=0

797

)))|(% style="width:243px" %)OK|(% style="width:1001px" %)(((

0X22000101:

00:ADR=0

01:DR=1

01:TXP=1

22:fixed command

)))

|(% style="width:161px" %)AT+TXP=?|(% style="width:138px" %)View the current TXP|(% style="width:243px" %)OK|(% style="width:1001px" %)

809

|(% style="width:161px" %)AT+TXP=1|(% style="width:138px" %)(((

810

set TXP to 1

811

812

It takes effect only when ADR=0

813

)))|(% style="width:243px" %)OK|(% style="width:1001px" %)(((

0X22000101:

00:ADR=0

01:DR=1

01:TXP=1

22:fixed command

)))

|(% style="width:161px" %) |(% style="width:138px" %)Upload node configuration or DS18B20 ID|(% style="width:243px" %) |(% style="width:1001px" %)(((

825

0X2301:Upload node configuration

826

827

0x2302:Upload DS18B20 ID

23:fixed command

)))

|(% style="width:161px" %)AT+DWELL=?|(% style="width:138px" %)Check the high-rate upload settings|(% style="width:243px" %)(((

1

OK

)))|(% style="width:1001px" %)Default 1

836

|(% style="width:161px" %)AT+DWELL=1|(% style="width:138px" %)(((

Set high rate upload

(AS923,AU915)

)))|(% style="width:243px" %)(((

841

Attention:Take effect after ATZ

OK

)))|(% style="width:1001px" %)(((

0x2501:close

0x2500:open

25:fixed command

for details, check wiki

854

)))

855

|(% style="width:161px" %)AT+RJTDC=?|(% style="width:138px" %)View current RJTDC set time|(% style="width:243px" %)(((

20

OK

)))|(% style="width:1001px" %)Default 20(min)

860

|(% style="width:161px" %)AT+RJTDC=10|(% style="width:138px" %)Set RJTDC time interval|(% style="width:243px" %)OK|(% style="width:1001px" %)(((

0X26000A:

26:fixed command

000A:0X000A=10(min)

for details, check wiki

868

)))

869

|(% style="width:161px" %) |(% style="width:138px" %)Retrieve stored data for a specified period of time|(% style="width:243px" %) |(% style="width:1001px" %)(((

870

0X3161DE7C7061DE8A800A:

31:fixed command

61DE7C70:0X61DE7C70=2022/1/12 15:00:00

875

876

61DE8A80:0X61DE8A80=2022/1/12 16:00:00

0A:0X0A=10(second)

View details 2.6.2

)))

|(% style="width:161px" %)AT+DDETECT=?|(% style="width:138px" %)View the current DDETECT setting status and time|(% style="width:243px" %)(((

0,1440

OK

)))|(% style="width:1001px" %)Default 0,1440(min)

887

|(% style="width:161px" %)AT+DDETECT=1,1440|(% style="width:138px" %)(((

888

Set DDETECT setting status and time

889

890

((% style="color:red" %)When the node does not receive the downlink packet within the set time, it will re-enter the network(%%))

891

)))|(% style="width:243px" %)OK|(% style="width:1001px" %)(((

0X320005A0:close

0X320105A0:open

32:fixed command

05A0:0X05A0=1440(min)

899

)))

900

|(% style="width:161px" %) |(% style="width:138px" %)(((

901

Downlink Modification Alarm Mode

902

903

(AT+WMOD,AT+CITEMP,AT+ARTEMP)

904

)))|(% style="width:243px" %) |(% style="width:1001px" %)(((

0XAA010002000F00032:

AA:fixed command

01:0X01=1(AT+MOD)

0002:0X0002=2(AT+CITEMP)

912

913

000F:0X000F=15(AT+ARTEMP)

914

915

0032:0X0032=50(AT+ARTEMP)

)))

== 3.2 Set Password ==

921

922

923

Feature: Set device password, max 9 digits.

924

925

(% style="color:#4f81bd" %)**AT Command: AT+PWORD**

926

927

[[image:image-20220523151052-5.png||_mstalt="428623" _mstvisible="3"]]

928

929

930

(% style="color:#4f81bd" %)**Downlink Command:**

931

932

No downlink command for this feature.

933

934

935

= 4. Battery & How to replace =

936

937

== 4.1 Battery Type and replace ==

938

939

940

LHT52 uses 2 x AAA LR03(1.5v) batteries. If the batteries running low (shows 2.1v in the platform). User can buy generic AAA battery and replace it.

941

942

943

(% style="color:red" %)**Note: **

944

945

1. The LHT52 doesn't have any screw, use can use nail to open it by the middle.

946

947

[[image:image-20220621143535-5.png]]

948

949

950

2. Make sure the direction is correct when install the AAA batteries.

951

952

[[image:image-20220621143535-6.png]]

953

954

955

== 4.2 Power Consumption Analyze ==

956

957

958

Dragino battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.

959

960

Instruction to use as below:

961

962

(% style="color:blue" %)**Step 1**(%%): Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from:

963

964

[[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]

965

966

967

(% style="color:blue" %)**Step 2**(%%): (% style="display:none" %) (%%)Open it and choose

* Product Model

* Uplink Interval

* Working Mode

And the Life expectation in difference case will be shown on the right.

974

975

[[image:image-20220621143643-7.png||height="429" width="1326"]]

976

977

978

= 5. Sensors and Accessories =

979

980

== 5.1 Temperature Probe (AS-01) ==

981

982

983

External Temperature Probe base on DS18B20. (note: Default Package doesn't include AS-01)

984

985

[[image:image-20220621141939-4.png||height="315" width="279"]] [[image:image-20220621141546-2.png||height="308" width="205"]](% style="display:none" %)

986

987

988

**External Temperature Probe (AS-01):(% style="display:none" %) (%%)**

989

990

* Resolution: 0.0625 °C

991

* ±0.5°C accuracy from -10°C to +85°C

992

* ±2°C accuracy from -55°C to +125°C

993

* Operating Range: -55 °C ~~ 125 °C

994

* Cable Length: 2 meters

== 5.2 Program Converter (AS-02) ==

999

1000

1001

AS-02 is an optional accessory, it is USB Type-C converter. AS-02 provide below feature:

1002

1003

1. Access AT console of LHT52 when used with USB-TTL adapter. [[See this link>>||anchor="H6.1HowtouseATCommandtoconfigureLHT52"]].

1004

1. Update firmware to LHT52 when used with DAP-Link adapter. [[See this link>>doc:Main.Firmware Upgrade Instruction.WebHome||anchor="H2.3LHT52"]].

1005

1006

[[image:image-20220621141724-3.png]]

= 6. FAQ =

== 6.1 How to use AT Command to configure LHT52 ==

1012

1013

1014

LHT52 supports AT Command set. User can use a USB to TTL adapter plus the Program Cable to connect to LHT52 for using AT command, as below.

1015

1016

1017

[[image:image-20220621144150-8.png||height="537" width="724"]]

**Connection:**

* (% style="background-color:yellow" %)USB to TTL GND <~-~-> Program Converter GND pin

1023

* (% style="background-color:yellow" %)USB to TTL RXD <~-~-> Program Converter D+ pin

1024

* (% style="background-color:yellow" %)USB to TTL TXD <~-~-> Program Converter A11 pin

1025

1026

It is also possible to connect using DAPLink

1027

1028

[[image:image-20220621144235-9.png||height="485" width="729"]]

(((

**Connection:**

)))

* (((

(% style="background-color:yellow" %)USB to DAP-LINK GND <~-~-> Program Converter GND pin

1036

)))

1037

* (((

1038

(% style="background-color:yellow" %)USB to DAP-LINK RXD <~-~-> Program Converter D+ pin

1039

)))

1040

* (((

1041

(% style="background-color:yellow" %)USB to DAP-LINK TXD <~-~-> Program Converter A11 pin

)))

(((

In PC, User needs to set **serial tool**(such as [[putty>>url:https://www.chiark.greenend.org.uk/~~sgtatham/putty/latest.html]], SecureCRT) baud rate to (% style="color:green" %)**115200**(%%) to access to access serial console for LHT52. The AT commands are disable by default and need to enter password (default:(% style="color:green" %)**123456**(%%)) to active it. Timeout to input AT Command is 5 min, after 5-minute, user need to input password again.

)))

(((

Input password and ATZ to activate LHT52,As shown below:

)))

[[image:image-20220621144235-10.png]]

1056

1057

1058

== 6.2 AT Command and Downlink ==

(((

Sending ATZ will reboot the node

)))

(((

Sending AT+FDR will restore the node to factory settings

)))

(((

Get the node's AT command setting by sending AT+CFG

)))

(((

)))

(((

**Example：**

)))

(((

AT+VER=EU868 v1.0

)))

(((

AT+NJM=1

)))

(((

AT+DEUI=25 32 12 45 65 26 12 35

)))

(((

AT+APPEUI=25 32 12 45 65 26 32 16

)))

(((

AT+APPKEY=25 32 12 45 65 26 32 16 89 48 85 65 45 87 89 55

)))

(((

AT+DADDR=00 00 00 00

)))

(((

AT+APPSKEY=00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

)))

(((

AT+NWKSKEY=00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

)))

(((

AT+NWKID=00 00 00 13

)))

(((

AT+ADR=1

)))

(((

AT+DR=5

)))

(((

AT+TXP=1

)))

(((

AT+CHS=0

)))

(((

AT+CLASS=A

)))

(((

AT+CFM=0

)))

(((

AT+JN1DL=5000

)))

(((

AT+JN2DL=6000

)))

(((

AT+RX1DL=5000

)))

(((

AT+RX2DL=6000

)))

(((

AT+RX1WTO=24

)))

(((

AT+RX2WTO=6

)))

(((

AT+RX2FQ=869525000

)))

(((

AT+RX2DR=0

)))

(((

AT+RPL=0

)))

(((

AT+FCU=6

)))

(((

AT+FCD=0

)))

(((

AT+CFS=0

)))

(((

AT+NJS=1

)))

(((

AT+DCS=0

)))

(((

AT+PNM=1

)))

(((

AT+PWORD=123456

)))

(((

AT+EXT=1

)))

(((

AT+TDC=120000

)))

(((

AT+TIMESTAMP=1640851037 2021 12 30 7 57 17

)))

(((

AT+RJTDC=20

)))

(((

AT+DDETECT=0,1440

)))

(((

AT+WMOD=0

)))

(((

AT+CITEMP=1

)))

(((

AT+ARTEMP=-40,125

)))

(((

Send AT+PDTA=? to get the stored 174 data

)))

(((

**Example：**

)))

[[image:image-20220621144804-11.png]]

1247

1248

1249

== 6.3 How to upgrade the firmware? ==

1250

1251

1252

LHT52 requires a program converter to upload images to LHT52, which is used to upload image to LHT52 for:

1253

1254

* Support new features

1255

* For bug fix

1256

* Change LoRaWAN bands.

1257

1258

(((

1259

User can check this link for the detail of operation of firmware upgrade: [[Firmware Upgrade Instruction>>doc:Main.Firmware Upgrade Instruction.WebHome||anchor="H2.3LHT52"]]

)))

== 6.4 How to change the LoRa Frequency Bands/Region? ==

1264

1265

1266

User can follow the introduction for [[how to upgrade image>>||anchor="H6.3A0Howtoupgradethefirmware3F"]]. When download the images, choose the required image file for download.

= 7. Order Info =

== 7.1 Main Device ==

(((

Part Number: (% style="color:#4472c4" %)**LHT65N-XX**

)))

(((

(% style="color:#4472c4" %)**XX **(%%): The default frequency band

1280

)))

1281

1282

* (% style="color:red" %)**AS923**(%%)**: **LoRaWAN AS923 band

1283

* (% style="color:red" %)**AU915**(%%)**: **LoRaWAN AU915 band

1284

* (% style="color:red" %)**EU433**(%%)**: **LoRaWAN EU433 band

1285

* (% style="color:red" %)**EU868**(%%)**:** LoRaWAN EU868 band

1286

* (% style="color:red" %)**KR920**(%%)**: **LoRaWAN KR920 band

1287

* (% style="color:red" %)**US915**(%%)**: **LoRaWAN US915 band

1288

* (% style="color:red" %)**IN865**(%%)**: **LoRaWAN IN865 band

1289

* (% style="color:red" %)**CN470**(%%)**: **LoRaWAN CN470 band

== 7.2 Accessories ==

1294

1295

1296

(% style="color:red" %)**Note: below accessories are not include in the main device package, need to order separately.**

1297

1298

**Temperature Probe: (% style="color:red" %)AS-01(%%)**

1299

1300

**Program Converter: (% style="color:red" %)AS-02(%%)**

= 8. Packing Info =

**Package Includes**:

1307

1308

* LHT52 Temperature & Humidity Sensor x 1

= 9. Support =

* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.

1316

* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]].

= 10. Reference material =

1321

1322

1323

* [[Datasheet, photos, decoder, firmware>>https://www.dropbox.com/sh/ucgxio6zltajlxg/AACxr_XyH4Cy7gevG293k4zqa?dl=0]]

1324

1325

1326