LDS03A - Outdoor LoRaWAN Open/Close Door Sensor Manual

The Dragino LDS03A is an (% style="color:blue" %)**Open/Close LoRaWAN Door Sensor**(%%). It detects door open/close status and uplinks to IoT server via LoRaWAN network. user can see the door status, open duration, open counts in the IoT Server.

23

)))

24

25

(((

26

LDS03A is powered by a (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%). It can be used for up to 10 years.

)))

(((

The LDS03A will send periodically data every 2 hours as well as for each door open/close action. It also counts the door open times and calculates the last door open duration. Users can also disable the uplink for each open/close event, instead, LDS03A can count each open event and uplink periodically.

)))

(((

LDS03A has a (% style="color:blue" %)**Datalog feature**(%%), it will record the open/close event and the user can retrieve the history from LoRaWAN.

)))

(((

LDS03A has the (% style="color:blue" %)**open alarm feature**(%%), user can set this feature so the device will send an alarm if the door has been open for a certain time.

)))

(((

LDS03A is designed for outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures.

)))

(((

Each LDS03A is pre-load with a set of unique keys for LoRaWAN registration, register these keys to LoRaWAN server and it will auto-connect after power on.

)))

(((

*Battery life depends on how often to send data, please see [[battery analyzer>>||anchor="H4.Battery26Howtoreplace"]].

)))

)))

== 1.2 Features ==

* LoRaWAN v1.0.3 Class A protocol.

60

* Frequency Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865/RU864

61

* Door Open/Close detect

62

* Door open/close statistics

63

* 8500mAh industrial battery(none-rechargeable)

64

* AT Commands to change parameters

65

* Uplink on periodically and open/close event

66

* Datalog feature

67

* Remote configure parameters via LoRa Downlink

68

* Firmware upgradable via program port

* Wall Mountable

* Outdoor Use

== 1.3 Storage & Operation Temperature ==

-40°C to +85°C

== 1.4 Applications ==

79

80

81

[[image:1654741400370-813.png]]

== 1.5 Mechanical ==

[[image:1654741444887-479.png]]

87

88

89

[[image:1654741488515-626.png]]

90

91

[[image:1654741510204-377.png]]

92

93

94

== 1.6 Pin Definitions and Switch ==

95

96

[[image:1654741572060-177.png]]

97

98

**LDS03A is based on LSN50v2**

99

100

101

=== 1.6.1 Pin Definition ===

102

103

(((

104

The device is pre-configured to connect to a door sensor. The other pins are not used. If user wants to know more about other pins, please refer to the user manual of LSN50v2 at: [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/>>url:http://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/]]

)))

=== 1.6.2 Jumper JP2(Power ON/OFF) ===

109

110

Power on Device when putting this jumper.

111

112

113

=== 1.6.3 BOOT MODE / SW1 ===

114

115

1) ISP: upgrade mode, device won't have any signal in this mode. but ready for upgrade firmware. LED won't work. Firmware won’t run.

116

117

2) Flash: work mode, the device starts to work and send out console output for further debug

118

119

120

=== 1.6.4 Reset Button ===

121

122

Press to reboot the device.

=== 1.6.5 LED ===

It will flash:

1. Boot the device in flash mode

130

1. Send an uplink packet

131

132

= 2. Operation Mode =

133

134

== 2.1 How it works ==

(((

(((

Each LDS03A is shipped with a worldwide unique set of OTAA keys. To use LDS03A in a LoRaWAN network, user needs to input the OTAA keys in the LoRaWAN network server. So LDS03A can join the LoRaWAN network and start to transmit sensor data.

)))

)))

== 2.2 Example to use for LoRaWAN network ==

144

145

(((

146

This section shows an example of how to join the TTN V3 LoRaWAN IoT server. Usages with other LoRaWAN IoT servers are similar.

)))

(((

[[image:1654742304325-850.png]]

)))

(((

* In this user case, the LDS03A is installed on the door edge to detect the open/close event and send the status to the LoRaWAN server. The LDS03A will uplink different types of messages to the LoRaWAN server. See [[Uplink payload>>||anchor="H2.3200BUplinkPayload"]] for detail.

157

158

(((

159

Assume the LG308 is already set to connect to the [[TTN V3 network >>url:https://eu1.cloud.thethings.network]]. We need to add the LDS03A device in TTN V3:

)))

)))

(((

(((

(% style="color:blue" %)**Step 1**(%%): Create a device in TTN V3 with the OTAA keys from LDS03A.

)))

(((

Each LDS03A is shipped with a sticker with the default device EUI as below:

)))

)))

[[image:image-20220607170145-1.jpeg]]

174

175

176

Users can enter these keys in the LoRaWAN Server portal. Below is the TTN V3 screenshot:

177

178

Add APP EUI in the application.

179

180

[[image:1654742558691-332.png]]

181

182

183

[[image:1654742595660-519.png]]

184

185

186

[[image:1654742610413-498.png]]

187

188

189

[[image:1654742630064-347.png]]

190

191

**Add APP KEY and DEV EUI**

192

193

194

(% style="color:blue" %)**Step 2**(%%): Power on LDS03A

195

196

[[image:1654742860601-778.png]]

(((

Put the jumper to power on LDS03A and it will auto-join to the TTN V3 network. After join success, it will start to upload sensor data to TTN V3 and the user can see it in the panel.

)))

[[image:image-20220609104802-1.png||height="369" width="1123"]]

205

206

207

== 2.3 Uplink Payload ==

(((

(((

Uplink payloads have two types:

)))

* (((

Open/Close Status: Use FPORT=2

216

)))

217

* (((

218

Other control commands: Use other FPORT fields.

)))

(((

The application server should parse the correct value based on FPORT settings.

)))

(((

)))

=== 2.3.1 Device Status, FPORT~=5 ===

)))

(((

Include device configure status. Once LDS03A Joined the network, it will uplink this message to the server. After that, LDS03A will uplink Device Status every 12 hours.

)))

(((

Users can also use the downlink command(0x26 01) to ask LDS03A to resend this uplink. This uplink payload also includes the DeviceTimeReq to get time.

238

)))

239

240

[[image:image-20220609105437-3.png]]

241

242

243

Example parse in TTNv3

244

245

[[image:image-20220609105101-2.png||height="295" width="1208"]]

246

247

* (% style="color:#4f81bd" %)**Sensor Model**(%%): For LDS03A, this value is 0x0A

248

249

* (% style="color:#4f81bd" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version

250

251

* (% style="color:#4f81bd" %)**Frequency Band**:

*0x01: EU868

*0x02: US915

*0x03: IN865

*0x04: AU915

*0x05: KZ865

*0x06: RU864

*0x07: AS923

*0x08: AS923-1

*0x09: AS923-2

*0x0a: AS923-3

*0x0b: CN470

*0x0c: EU433

*0x0d: KR920

*0x0e: MA869

* (% style="color:#4f81bd" %)**Sub-Band**:

283

** AU915 and US915:value 0x00 ~~ 0x08

284

** CN470: value 0x0B ~~ 0x0C

285

** Other Bands: Always 0x00

286

287

* (% style="color:#4f81bd" %)**Battery Info:**

288

289

Check the battery voltage.

Ex1: 0x0B45 = 2885mV

Ex2: 0x0B49 = 2889mV

=== 2.3.2 Sensor Configuration, FPORT~=4 ===

298

299

LDS03A will only send this command after getting the downlink command (0x26 02) from the server.

300

301

[[image:image-20220609110123-5.png]]

302

303

304

* (% style="color:#4f81bd" %)**TDC: (default: 0x001C20)**

305

306

Uplink interval for the Open/Close Event, default value is 0x001C20 which is 7200 seconds = 2 hours.

307

308

309

* (% style="color:#4f81bd" %)**Disalarm: (default: 0)**

310

311

(% style="color:#4f81bd" %)**If Disalarm = 1**(%%), LDS03A will only send uplink at every TDC periodically. This is normally use for pulse meter application, in this application, there are many open/close event, and platform only care about the total number of pulse.

312

313

(% style="color:#4f81bd" %)**If Disalarm = 0**(%%), LDS03A will send uplink at every TDC periodically and send data on each open/close event. This is useful for the application user need to monitor the open/close event in real-time.

314

315

Note: When Disalarm=0, a high frequently open/close event will cause lots of uplink and drain battery very fast.

316

317

318

* (% style="color:#4f81bd" %)**Keep Status & Keep Time**

319

320

Shows the configure value of [[Alarm Base on Timeout Feature>>||anchor="H3.8AlarmBaseonTimeout"]]

321

322

323

[[image:image-20220609110018-4.png||height="291" width="1159"]]

=== 2.3.3 Real-Time Open/Close Status, Uplink FPORT~=2 ===

328

329

LDS03A will send this uplink **after** Device Status once join the LoRaWAN network successfully. And LDS03A will:

330

331

332

1. periodically send this uplink every 2 hours, this interval [[can be changed>>||anchor="H3.1SetTransmitIntervalTime"]].

333

1. There is an Open/Close event.

334

335

Uplink Payload totals 11 bytes.

336

337

(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:495px" %)

338

|(% colspan="5" style="width:492px" %)**Real-Time Open/Close Status, FPORT=2**

339

340

|(% style="width:101px" %)**Value**|(% style="width:77px" %)Status & [[Alarm>>||anchor="H3.8AlarmBaseonTimeout"]]|(% style="width:99px" %)Total open door events|(% style="width:88px" %)(((

The last door open

duration (unit: min)

)))|(% style="width:126px" %)[[Unix TimeStamp>>||anchor="H2.4.1UnixTimeStamp"]]

345

346

(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:509px" %)

347

|(% colspan="4" style="width:506px" %)**Status & Alarm field**

348

|(% style="width:82px" %)**Size (bit)**|(% style="width:71px" %)**6**|(% style="width:221px" %)**1**|(% style="width:130px" %)**1**

349

|(% style="width:82px" %)**Value**|(% style="width:71px" %)Reserve|(% style="width:221px" %)[[Enable/disable Timeout Alarm>>||anchor="H3.8AlarmBaseonTimeout"]]

350

0: No Alarm; 1: Alarm|(% style="width:130px" %)Status

351

0: Close, 1: Open

352

353

[[image:image-20220609110547-6.png||height="337" width="1191"]]

=== 2.3.4 Historical Door Open/Close Event, FPORT~=3 ===

358

359

LDS03A stores sensor values and users can retrieve these history values via the [[downlink command>>||anchor="H2.4DatalogFeature"]].

360

361

The historical payload includes one or multiplies entries and every entry has the same payload as Real-Time open/close status.

362

363

364

* Each data entry is 11 bytes and has the same structure as [[Real-Time open/close status>>||anchor="H2.3.3Real-TimeOpen/CloseStatus,Uplink FPORT=2"]], to save airtime and battery, LDS03A will send max bytes according to the current DR and Frequency bands.

365

366

For example, in the US915 band, the max payload for different DR is:

367

368

a) DR0: max is 11 bytes so one entry of data

369

370

b) DR1: max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)

371

372

c) DR2: total payload includes 11 entries of data

373

374

d) DR3: total payload includes 22 entries of data.

375

376

If LDS03A doesn’t have any data in the polling time. It will uplink 11 bytes of 0

377

378

379

[[image:image-20220609112215-7.png||height="277" width="1250"]]

380

381

(% style="color:#037691" %)**Downlink:**

382

383

0x31 61 8E 57 40 61 8E 81 70 05

384

385

386

(% style="color:#037691" %)**Uplink:**

387

388

00 00 00 00 00 00 00 61 8E 5F 8F 01 00 00 01 00 00 00 61 8E 5F D2 00 00 00 01 00 00 02 61 8E 60 64 01 00 00 02 00 00 02 61 8E 60 75 00 00 00 02 00 00 01 61 8E 60 C6 00 00 00 02 00 00 01 61 8E 7B A7 01 00 00 03 00 00 01 61 8E 7F 38 00 00 00 03 00 00 02 61 8E 7F CE 01 00 00 04 00 00 02 61 8E 81 1B 00 00 00 04 00 00 00 61 8E 81 50

389

390

391

(% style="color:#037691" %)**Parsed Value:**

392

393

[ALARM, DOOR_OPEN_STATUS, DOOR_OPEN_TIMES,LAST_DOOR_OPEN_DURATION, TIME]

394

395

396

[FALSE, CLOSE, 0, 0, 2021-11-12 12:35:27],

397

398

[FALSE, OPEN, 1, 0, 2021-11-12 12:36:34],

399

400

[FALSE, CLOSE, 1, 2, 2021-11-12 12:39:00],

401

402

[FALSE, OPEN, 2, 2, 2021-11-12 12:39:17],

403

404

[FALSE, CLOSE, 2, 1, 2021-11-12 12:40:38],

405

406

[FALSE, CLOSE, 2, 1, 2021-11-12 14:35:19],

407

408

[FALSE, OPEN, 3, 1, 2021-11-12 14:50:32],

409

410

[FALSE, CLOSE, 3, 2, 2021-11-12 14:53:02],

411

412

[FALSE, OPEN, 4, 2, 2021-11-12 14:58:35],

413

414

[FALSE, CLOSE, 4, 0, 2021-11-12 14:59:28],

== 2.4 Datalog Feature ==

419

420

When a user wants to retrieve sensor value, he can send a poll command from the IoT platform to ask the sensor to send value in the required time slot.

421

422

423

=== 2.4.1 Unix TimeStamp ===

424

425

LDS03A use Unix TimeStamp format based on

426

427

[[image:image-20220609113256-8.png]]

(((

Users can get this time from the link: [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/]] :

)))

(((

Below is the converter example

436

)))

437

438

[[image:image-20220609113256-9.png||height="467" width="1127"]]

439

440

(((

441

So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25

)))

=== 2.4.2 Set Device Time ===

446

447

(((

448

There are two ways to set the device’s time:

)))

(((

(% style="color:#037691" %)**1. Through LoRaWAN MAC Command (Default settings)**

)))

(((

Users need to set SYNCMOD=1 to enable sync time via the MAC command.

)))

(((

Once LDS03A Joined the LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to LDS03A. If LDS03A fails to get the time from the server, LDS03A will use the internal time and wait for the next time request ~[[[via Device Status (FPORT=5)>>||anchor="H2.3.1DeviceStatus,FPORT=5"]]].

)))

(((

)))

(((

(% style="color:red" %)Note(%%): (% style="color:#037691" %)LoRaWAN Server needs to support LoRaWAN v1.0.3(MAC v1.0.3) (%%)or higher to support this MAC command feature.

)))

(((

)))

(((

(% style="color:#037691" %)**2. **(% style="color:#037691; font-weight:bold" %)**Manually Set Time**

)))

(((

Users need to set SYNCMOD=0 to manual time, otherwise, the user set time will be overwritten by the time set by the server.

)))

== 2.5 Show Data in DataCake IoT Server ==

(((

(((

Datacake IoT platform provides a human-friendly interface to show the sensor data, once we have sensor data in TTN V3, we can use Datacake to connect to TTN V3 and see the data in Datacake. Below are the steps:

)))

)))

(((

(((

)))

)))

(((

(((

(% style="color:blue" %)**Step 1**(%%)**: Link TTNv3 to Datacake.**[[https:~~/~~/docs.datacake.de/lorawan/lns/thethingsindustries#create-integration-on-tti>>url:https://docs.datacake.de/lorawan/lns/thethingsindustries#create-integration-on-tti]]

)))

)))

(((

(((

(% style="color:blue" %)**Step 2**(%%)**: Configure LDS03A in Datacake.**

)))

)))

[[image:1654746350207-427.png]]

512

513

514

[[image:1654747162439-840.png]]

515

516

517

[[image:1654746405400-203.png]]

[[image:1654746763908-732.png]]

[[image:1654746716087-684.png]]

526

527

528

[[image:1654746693868-718.png]]

529

530

531

[[image:1654746674738-826.png]]

532

533

534

[[image:1654746646379-591.png]]

535

536

537

[[image:1654746549277-209.png]]

538

539

540

[[image:1654746593411-887.png]]

= 3. Configure LDS03A via AT Command or LoRaWAN Downlink =

545

546

(((

547

Use can configure LDS03A via AT Command or LoRaWAN Downlink.

)))

* (((

AT Command Connection: See [[FAQ>>||anchor="H5.FAQ"]].

552

)))

553

* (((

554

LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>doc:Main.WebHome]]

)))

(((

There are two kinds of commands to configure LDS03A, they are:

)))

* (((

(% style="color:#4f81bd" %)** General Commands**.

)))

(((

These commands are to configure:

)))

* (((

General system settings like: uplink interval.

571

)))

572

* (((

573

LoRaWAN protocol & radio related command.

)))

(((

They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki: [[End Device AT Commands and Downlink Command>>doc:Main.End Device AT Commands and Downlink Command.WebHome]]

)))

(((

)))

* (((

(% style="color:#4f81bd" %)** Commands special design for LDS03A**

)))

(((

These commands only valid for LDS03A, as below:

)))

== 3.1 Set Transmit Interval Time ==

594

595

Feature: Change LoRaWAN End Node Transmit Interval.

596

597

(% style="color:#037691" %)**AT Command: AT+TDC**

598

599

[[image:image-20220607171554-8.png]]

(((

(% style="color:#037691" %)**Downlink Command: 0x01**

)))

(((

Format: Command Code (0x01) followed by 3 bytes time value.

)))

(((

If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.

)))

* (((

Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds

616

)))

617

* (((

618

Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds

)))

== 3.2 Set Password ==

624

625

Feature: Set device password, max 9 digits

626

627

(% class="box infomessage" %)

628

(((

629

**AT Command: AT+PWORD**

630

)))

631

632

(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:404.989px" %)

633

|=(% style="width: 170px;" %)**Command Example**|=(% style="width: 123px;" %)**Function**|=(% style="width: 109px;" %)**Response**

634

|(% style="width:170px" %)(((

635

AT+PWORD=?

636

)))|(% style="width:123px" %)(((

637

Show password

638

)))|(% style="width:109px" %)(((

(((

123456

)))

(((

OK

)))

)))

|(% style="width:170px" %)(((

648

AT+PWORD=999999

649

)))|(% style="width:123px" %)(((

650

Set password

651

)))|(% style="width:109px" %)(((

OK

)))

(% style="color:#4f81bd" %)**Downlink Command:**

656

657

No downlink command for this feature.

== 3.3 Quit AT Command ==

662

663

Feature: Quit AT Command mode, so user needs to input the password again before using AT Commands.

664

665

(% class="box infomessage" %)

666

(((

667

**AT Command: AT+DISAT**

668

)))

669

670

(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:451.989px" %)

671

|=(% style="width: 155px;" %)**Command Example**|=(% style="width: 198px;" %)**Function**|=(% style="width: 96px;" %)**Response**

672

|(% style="width:155px" %)AT+DISAT|(% style="width:198px" %)Quit AT Commands mode|(% style="width:96px" %)OK

673

674

(% style="color:#4f81bd" %)**Downlink Command:**

675

676

No downlink command for this feature.

== 3.4 Enable / Disable Alarm ==

681

682

Feature: Enable/Disable Alarm for open/close event. Default value 0.

683

684

(% style="color:#4f81bd" %)**AT Command:**

685

686

[[image:image-20220609140712-1.png]]

687

688

689

(% style="color:#4f81bd" %)**Downlink Command:**

690

691

0xA7 01 ~/~/Same As AT+DISALARM=1

692

693

0xA7 00 ~/~/ Same As AT+DISALARM=0

== 3.5 Clear count ==

698

699

Feature: Clear current door open.

**AT Command:**

(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510.222px" %)

704

|=(% style="width: 155px;" %)**Command Example**|=(% style="width: 266px;" %)**Function**|=(% style="width: 85px;" %)**Response**

705

|(% style="width:155px" %)AT+CLRC|(% style="width:266px" %)Clear the count of door open events.|(% style="width:85px" %)OK

706

707

**Downlink Command:**

708

709

0xA6 01 ~/~/ Same As AT+ CLRC

== 3.6 Set system time ==

714

715

Feature: Set system time, Unix format. [[See here for format detail.>>||anchor="H2.4.1UnixTimeStamp"]]

**AT Command:**

[[image:image-20220609141735-2.png]]

720

721

722

**Downlink Command:**

723

724

0x306007806000 ~/~/ Set timestamp to 0x(6007806000),Same as AT+TIMESTAMP=1611104352

== 3.7 Set Time Sync Mode ==

729

730

Feature: Enable/Disable Sync system time via LoRaWAN MAC Command (DeviceTimeReq), LoRaWAN server must support v1.0.3 protocol to reply to this command.

731

732

SYNCMOD is set to 1 by default. If user wants to set a different time from the LoRaWAN server, the user needs to set this to 0.

**AT Command:**

[[image:image-20220609142205-4.png]]

738

739

740

**Downlink Command:**

741

742

0x28 01 ~/~/ Same As AT+SYNCMOD=1

743

744

0x28 01 08 ~/~/ Same As AT+SYNCMOD=1,8

745

746

0x28 01 F4 ~/~/ Same As AT+SYNCMOD=1,-12

747

748

0x28 00 ~/~/ Same As AT+SYNCMOD=0

749

750

751

== 3.8 Alarm Base on Timeout ==

752

753

(((

754

LDS03A can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:

755

756

757

* **Keep Status: Status to be monitor**

758

759

Keep Status = 1: Monitor Close to Open event

760

761

Keep Status = 0: Monitor Open to Close event

762

763

764

* **Keep Time: Timeout to send an Alarm**

765

766

Range 0 ~~ 65535(0xFFFF) seconds.

767

768

If keep time = 0, Disable Alarm Base on Timeout feature.

769

770

If keep time > 0, device will monitor the keep status event and send an alarm when status doesn’t change after timeout.

)))

(((

(% style="color:#4f81bd" %)**AT Command**(%%) to configure:

775

776

* **AT+TTRIG=1,30** **~-~->** When the **Keep Status** change from close to open, and device remains in open status for more than 30 seconds. LDS03A will send an uplink packet, the [[Alarm bit>>path:#open_close_value]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.

777

778

* **AT+TTIG=0,0** **~-~-> ** Default Value, disable timeout Alarm.

)))

(((

(% style="color:#4f81bd" %)**Downlink Command**(%%) to configure:

785

786

**Command: 0xA9 aa bb cc**

)))

(((

A9: Command Type Code

)))

(((

aa: status to be monitored

)))

(((

bb cc: timeout.

)))

(((

If user send 0xA9 01 00 1E: equal to AT+TTRIG=1,30

)))

(((

Or

)))

(((

0xA9 00 00 00: Equal to AT+TTRIG=0,0. Disable timeout Alarm.

)))

== 3.9 Clear Flash Record ==

817

818

Feature: Clear flash storage for data log feature.

819

820

(% class="box infomessage" %)

821

(((

822

**AT Command: AT+CLRDTA**

823

)))

824

825

(% border="1" style="background-color:#ffffcc; color:green; width:689.989px" %)

826

|(% style="width:159px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:237px" %)**Response**

827

|(% style="width:159px" %)AT+CLRDTA|(% style="width:290px" %)Clear flash storage for data log feature.|(% style="width:237px" %)Clear all stored sensor data… OK

828

829

(((

830

(% style="color:#4f81bd" %)**Downlink Command:**

831

)))

832

833

(% class="box infomessage" %)

834

(((

835

(((

836

➢ **Example**: 0xA301 ~/~/Same as AT+CLRDTA

)))

)))

= 4. Battery & How to replace =

845

846

== 4.1 Battery Type ==

847

848

(((

849

LSPH01 is equipped with a [[8500mAH ER26500 Li-SOCI2 battery>>url:https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]. The battery is un-rechargeable battery with low discharge rate targeting for 8~~10 years use. This type of battery is commonly used in IoT target for long-term running, such as water meter.

)))

(((

The discharge curve is not linear so can’t simply use percentage to show the battery level. Below is the battery performance.

854

)))

855

856

[[image:1654593587246-335.png]]

857

858

859

Minimum Working Voltage for the LSPH01:

860

861

LSPH01: 2.45v ~~ 3.6v

== 4.2 Replace Battery ==

866

867

(((

868

Any battery with range 2.45 ~~ 3.6v can be a replacement. We recommend to use Li-SOCl2 Battery.

)))

(((

And make sure the positive and negative pins match.

)))

== 4.3 Power Consumption Analyze ==

878

879

(((

880

Dragino Battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.

)))

(((

Instruction to use as below:

)))

**Step 1**: Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from:

889

890

[[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]

891

892

893

**Step 2**: Open it and choose

* Product Model

* Uplink Interval

* Working Mode

And the Life expectation in difference case will be shown on the right.

900

901

[[image:1654593605679-189.png]]

902

903

904

The battery related documents as below:

905

906

* (((

907

[[Battery Dimension>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/&file=LSN50-Battery-Dimension.pdf]],

908

)))

909

* (((

910

[[Lithium-Thionyl Chloride Battery datasheet>>url:https://www.dragino.com/downloads/downloads/datasheet/Battery/ER26500/ER26500_Datasheet-EN.pdf]],

911

)))

912

* (((

913

[[Lithium-ion Battery-Capacitor datasheet>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC_1520_datasheet.jpg]], [[Tech Spec>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC1520%20Technical%20Specification20171123.pdf]]

914

)))

915

916

[[image:image-20220607172042-11.png]]

=== 4.3.1 Battery Note ===

921

922

(((

923

The Li-SICO battery is designed for small current / long period application. It is not good to use a high current, short period transmit method. The recommended minimum period for use of this battery is 5 minutes. If you use a shorter period time to transmit LoRa, then the battery life may be decreased.

)))

=== 4.3.2 Replace the battery ===

929

930

(((

931

You can change the battery in the LSPH01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won’t be voltage drop between battery and main board.

)))

(((

The default battery pack of LSPH01 includes a ER26500 plus super capacitor. If user can’t find this pack locally, they can find ER26500 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)

)))

= 5. Use AT Command =

941

942

== 5.1 Access AT Commands ==

943

944

LSPH01 supports AT Command set in the stock firmware. You can use a USB to TTL adapter to connect to LSPH01 for using AT command, as below.

945

946

[[image:1654593668970-604.png]]

**Connection:**

(% style="background-color:yellow" %)** USB TTL GND <~-~-~-~-> GND**

951

952

(% style="background-color:yellow" %)** USB TTL TXD <~-~-~-~-> UART_RXD**

953

954

(% style="background-color:yellow" %)** USB TTL RXD <~-~-~-~-> UART_TXD**

(((

In the PC, you need to set the serial baud rate to (% style="color:green" %)**9600**(%%) to access the serial console for LSPH01. LSPH01 will output system info once power on as below:

)))

[[image:1654593712276-618.png]]

963

964

Valid AT Command please check [[Configure Device>>||anchor="H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink"]].

= 6. FAQ =

== 6.1 How to change the LoRa Frequency Bands/Region ==

970

971

You can follow the instructions for [[how to upgrade image>>||anchor="H2.10200BFirmwareChangeLog"]].

972

When downloading the images, choose the required image file for download.

973

974

975

= 7. Trouble Shooting =

976

977

== 7.1 AT Commands input doesn’t work ==

978

979

In the case if user can see the console output but can’t type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn’t send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.

= 8. Order Info =

Part Number: (% style="color:blue" %)**LSPH01-XX**

986

987

988

(% style="color:blue" %)**XX**(%%): The default frequency band

989

990

* (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band

991

* (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band

992

* (% style="color:red" %)**EU433**(%%): LoRaWAN EU433 band

993

* (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band

994

* (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band

995

* (% style="color:red" %)**US915**(%%): LoRaWAN US915 band

996

* (% style="color:red" %)**IN865**(%%): LoRaWAN IN865 band

997

* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band

= 9. Packing Info =

**Package Includes**:

1003

1004

* LSPH01 LoRaWAN Soil Ph Sensor x 1

1005

1006

**Dimension and weight**:

* Device Size: cm

* Device Weight: g

* Package Size / pcs : cm

* Weight / pcs : g

= 10. Support =

* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.

1016

* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]].

Wiki source code of LDS03A - Outdoor LoRaWAN Open/Close Door Sensor Manual

Applications

Navigation