LWL02 - LoRaWAN Water Leak Sensor User Manual

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image001.png]]

7

8

1. Introduction

11. What is LWL02 LoRaWAN Water Leak Sensor

16

17

The Dragino LWL02 is a LoRaWAN Water Sensor. When there is water between the two metal probes, LWL02 indicates a water leak event and uplink to IoT server via LoRaWAN network.

18

19

20

LWL02 is powered by 2 x AAA batteries and target for long time use, these two batteries can provide about 16,000 ~~ 70,000 uplink packets, which result in 2 ~~ 10 years battery life. After battery running out, user can easily open the enclosure and replace with 2 common AAA batteries.

21

22

23

The LWL02 will send periodically data every day as well as for each water leak event. It also counts the water leak times and calculate last water leak duration. User can also disable the uplink for each water leak event, instead, device can count each event and uplink periodically.

24

25

26

Each LWL02 is pre-load with a set of unique keys for LoRaWAN registration, register these keys to

27

28

LoRaWAN server and it will auto connect after power on. [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image002.png]]

*

*1. Features

* LoRaWAN Class A v1.0.3

36

* Frequency Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865/RU864

37

* SX1262 LoRa Core

38

* Water Leak detect

39

* 2 x AAA LR03 Batteries

40

* AT Commands to change parameters

41

* Uplink on periodically and open/close action

42

* Remote configure parameters via LoRa Downlink

43

* Firmware upgradable via program port

*

*1. Applications

* Smart Buildings & Home Automation

48

* Logistics and Supply Chain Management

* Smart Metering

* Smart Agriculture

* Smart Cities

* Smart Factory

1.

11. Dimension

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image003.png]]

58

59

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image004.png]]

1.

11. Firmware Change log

64

65

LWL02 use the same firmware as LDS01.

66

67

[[LWL02 Image files – Download link>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LDS01/Firmware/]]

1. Power ON LWL02

When receive the LWL02, please open the enclosure and add 2 x AAA batteries to power it. The [[LED>>path:#LED]] will blink when device is powered.

1. How to install LWL02

79

80

When install the LWL02 on wall. Please install as below so the water leak probe will be soak in water for water detect purpose. The LWL02 main body is not water proof. Please don’t let water go inside the LWL02 main body.

|(((

50cm

)))

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image005.png]]

1. Operation Mode

11. How it works?

The LWL02 is configured as LoRaWAN OTAA Class A mode by default. It has OTAA keys to join network. To connect a local LoRaWAN network, user just need to input the OTAA keys in the network server and [[power on>>path:#Power_on]] the LWL02. It will auto join the network via OTAA.

100

101

102

In case user can’t set the OTAA keys in the network server and has to use the existing keys from server. User can [[use AT Command>>path:#AT_Command]] to set the keys in the devices.

1.

11. Example to join LoRaWAN network

107

108

Here shows an example for how to join the [[TTN V3 Network>>url:https://eu1.cloud.thethings.network/]]. Below is the network structure, we use [[LG308>>url:http://www.dragino.com/products/lora-lorawan-gateway/item/140-lg308.html]] as LoRaWAN gateway here.

109

110

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image006.png]]

The LWL02 has water leak detect probe as above. When there is water between these two detect probe, they will be short and generate the water leak event. and send the status to LoRaWAN server. The LWL02 will uplink two type of messages to the server.

115

116

* A keep-alive message which send once per day.

117

* An emergency event message when detect a water leak. ([[Alarm event can be disabled>>path:#Alarm]])

118

* A periodically update at every 10 minutes when in water leak.

119

* A message when switch from water leak to none water leak. ([[Alarm event can be disabled>>path:#Alarm]])

120

121

122

The LG308 is already set to connect to [[TTN V3 network >>url:https://eu1.cloud.thethings.network/]]. What we need to now is only configure the TTN V3:

123

124

**Step 1**: Create a device in TTN V3 with the OTAA keys from LWL02.

125

126

Each LWL02 is shipped with a sticker with unique device EUI:

127

128

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image007.png]]

User can enter this key in their LoRaWAN Server portal. Below is TTN V3 screen shot:

134

135

Add APP EUI in the application.

136

137

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image008.png]]

138

139

140

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image009.png]]

141

142

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image010.png]]

143

144

145

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image011.png]]

Add APP KEY and DEV EUI

154

155

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image012.png]]

156

157

**Step 2**: [[Power on>>path:#Power_on]] LWL02 and it will auto join to the TTN V3 network. After join success, it will start to upload message to TTN V3 and user can see in the panel.

158

159

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image013.png]]

1.

11. Uplink Payload

Uplink Payload total 9 bytes.

166

167

168

|**Size(bytes)**|**2**|**1**|**3**|**3**

169

|value|Status&BAT|(((

MOD

Always:0x02

)))|Total water leak events|(((

Last water leak

duration (unit: min)

)))

Example:

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image014.png]]

182

183

184

Example Payload Decoder in TTN V3:

185

186

[[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LDS01/Payload/>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LDS01/Payload/]]

1.

11. Downlink Payload

|**Downlink Control Type**|**Type Code**|**Downlink payload size(bytes)**

195

|TDC (Transmit Time Interval—Keep Alive Interval)|0x01|4

196

|RESET|0x04|2

197

|[[Set confirmed mode>>path:#code05]]|0x05|2

198

|[[Clear Counting>>path:#codeA6]]|0xA6|2

199

|[[Enable/Disable Alarm>>path:#code70]]|0xA7|2

200

|[[Control ADR/DR>>path:#codeA8]]|0xA8|3

201

|[[Set Alarm Timeout>>path:#Alarm_Timeout]]|0xA9|4

Example Downlink payload setting in TTN V3:

206

207

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image015.png]]

**Type Code 0x01**

If the payload=0100003C, means to control the LWL02’s Keep Alive interval to 0x00003C=60(S)

**Type Code 0x04**

If payload = 0x04FF, it will reset the LWL02.

**Type Code 0x05**

0x05 00: Set uplink to LoRaWAN unconfirmed mode

223

224

0x05 01: Set uplink to LoRaWAN confirmed mode

**Type Code 0xA6**

Example: 0xA601: Clear Counting

230

For LWL02: reset both count number and time.

**Type Code 0xA7**

0xA7 01 : Equal to AT+DISALARM=1

236

237

0xA7 00 : Equal to AT+DISALARM=0

**Type Code 0xA8**

Format: 0xA8 aa bb

aa: 1: Enable ADR; 0: Disable ADR (Same as AT+CADR command)

245

246

bb: set DR (Same as AT+CDATARATE ,only valid after ADR=0)

247

248

Example: 0x A8 00 02 : Set ADR=0 and DR=1

**Type Code 0xA9**

See [[Alarm Base Timeout>>path:#Alarm_Timeout]] for detail.

1.

11. Integrate with Datacake

259

260

Datacake provides a human friendly interface to show the sensor data, once we have data in TTN V3, we can use Datacake to connect to TTN V3 and see the data in Datacake. Below are the steps:

261

262

263

Step 1: Be sure that your device is programmed and properly connected to the network at this time.

264

265

Step 2: To configure the Application to forward data to Datacake you will need to add integration. To add the Datacake integration, perform the following steps:

266

267

268

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image016.png]]

269

270

271

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image017.png]]

272

273

274

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image018.png]]

Step 3: Create an account or log in Datacake.

279

280

Step 4: Search LWL02 and add DevEUI.

281

282

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image019.png]]

1.

11. Alarm Base on Timeout

287

288

LWL02 can monitor the timeout for a status change, this feature can be used to monitor some event such as open fridge too long etc.

289

290

291

User configure this feature by using:

292

293

294

**AT Command** to configure:

295

296

* AT+TTRIG=1,30 à When status change from close to open, and device keep in open

297

298

status for more than 30 seconds. LWL02 will send an uplink packet, the Alarm bit (the lowest bit of 10^^th^^ byte of payload) on this uplink packet is set to 1.

299

300

* AT+TTIG=0,0 à Default Value, disable timeout Alarm.

301

302

**Downlink Command** to configure:

303

304

Command: 0xA9 aa bb cc

305

306

A9: Command Type Code

307

308

aa: status to be monitor

bb cc: timeout.

If user send 0xA9 01 00 1E: equal to AT+TTRIG=1,30

Or

0xA9 00 00 00: Equal to AT+TTRIG=0,0. Disable timeout Alarm.

1.

11. LEDs

|**Action**|**LED behavior**

326

|Power On|**GREEN on 1s, RED on 1s, BLUE on 1s**

327

|Joined successful|**GRENN LED **on 5s

328

|Send an uplink message|**GREEN LED** blinks once

329

|Got a downlink message|**BLUE LED** blinks once

1. Battery & How to replace

334

11. Battery Type and replace

335

336

LWL02 is equipped with 2 x AAA LR03 batteries. If the batteries running low(see 2.1v in the platform). User can buy generic AAA battery and replace it. Note:

337

338

1. The LWL02 doesn’t have any screw, use can use nail to open it by the middle.

339

1. Make sure the direction is correct when install the AAA batteries.

340

341

**Important Notice: Make sure use new AAA LR03 battery and the battery doesn’t have broken surface.**

342

343

344

Example of AAA LR03 batter:

345

346

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image020.png]]

1.

11. Power Consumption Analyze

353

354

Dragino battery powered products are all run in Low Power mode. User can check the guideline from this link to calculate the estimate battery life:

355

356

[[https:~~/~~/www.dragino.com/downloads/downloads/LoRa_End_Node/Battery_Analyze/DRAGINO_Battery_Life_Guide.pdf>>url:https://www.dragino.com/downloads/downloads/LoRa_End_Node/Battery_Analyze/DRAGINO_Battery_Life_Guide.pdf]]

1. Use AT Command

11. Access AT Command

362

363

LWL02 supports AT Command set. User can use a USB to TTL adapter to configure LWL02 via use AT command, as below.

364

365

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image021.png]]

366

367

USB to TTL <- -> LWL02

RX <- -> TX

TX <- -> RX

GND <- -> GND

In PC, User needs to set **serial tool**(such as [[putty>>url:https://www.chiark.greenend.org.uk/~~sgtatham/putty/latest.html]], SecureCRT) baud rate to **115200** to access to access serial console of LWL02. Below is the output for reference:

377

378

The AT Access password is **123456**.

379

380

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image022.png]]

381

382

Each AT Command need to add an ENTER at the end before send.

383

384

385

When entering the first command, the RED LED will on and user can now input AT Commands. After input all needed AT Commands, please input AT+CLPM=1 to set the device to work in Low Power mode and RED LED will be off.

386

387

388

More detail AT Command manual can be found at [[AT Command Manual>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LDS01/]]

= 7. FAQ =

== 7.1 How to upgrade the image? ==

396

397

User can upgrade the of LWL02 for bug fix, new features, or change working region. The upgrade instruction is here: [[Firmware Upgrade Instruction>>Firmware Upgrade Instruction for STM32 base products]]

== 7.2 How to change the LoRa Frequency Bands/Region? ==

403

404

If user has for example US915 frequency and want to change it to AS923 frequency. User can follow the introduction for [[how to upgrade image>>||anchor="H7.1Howtoupgradetheimage"]]. When download the images, choose the required image file for download.

== 7.3 Can I disable uplink for each event to save battery life? ==

410

411

Yes, User can use below method to disable this:

412

413

(% style="color:#4f81bd" %)**via AT Command**:

414

415

AT+DISALARM=1, End node will only send packet in TDC time.

416

417

AT+DISALARM=0, End node will send packet in TDC time or status change for door sensor.

418

419

(% style="color:#4f81bd" %)**via LoRaWAN downlink Command**:

420

421

0xA701 : Equal to AT+DISALARM=1

422

423

0xA700 : Equal to AT+DISALARM=0

= 8. Order Info =

**Part Number: (% style="color:blue" %)LWL02-XXX(%%)**

431

432

(% style="color:blue" %)**XXX:**

433

434

* (% style="color:red" %)**EU433**(%%): frequency bands EU433

435

* (% style="color:red" %)**EU868**(%%): frequency bands EU868

436

* (% style="color:red" %)**KR920**(%%): frequency bands KR920

437

* (% style="color:red" %)**CN470**(%%): frequency bands CN470

438

* (% style="color:red" %)**AS923**(%%): frequency bands AS923

439

* (% style="color:red" %)**AU915**(%%): frequency bands AU915

440

* (% style="color:red" %)**US915**(%%): frequency bands US915

441

* (% style="color:red" %)**IN865**(%%): frequency bands IN865

442

* (% style="color:red" %)**CN779**(%%): frequency bands CN779

= 9. Packing Info =

**Package Includes**:

* LWL02 x 1

= 10.Support =

* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.

454

* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]].

455

456

Wiki source code of LWL02 - LoRaWAN Water Leak Sensor User Manual

Applications

Navigation