LDDS20 - LoRaWAN Ultrasonic Liquid Level Sensor User Manual

The Dragino LDDS20 is a (% style="color:#4472c4" %)**LoRaWAN Ultrasonic liquid level sensor**(%%) for Internet of Things solution. It uses (% style="color:#4472c4" %)**none-contact method **(%%)to measure the height of liquid in a container without opening the container, and send the value via LoRaWAN network to IoT Server

28

)))

29

30

(((

31

The LDDS20 sensor is installed directly below the container to detect the height of the liquid level. User doesn't need to open a hole on the container to be tested. The (% style="color:#4472c4" %)**none-contact measurement makes the measurement safety, easier and possible for some strict situation**.

)))

(((

LDDS20 uses ultrasonic sensing technology for distance measurement. LDDS20 is of high accuracy to measure various liquid such as: (% style="color:#4472c4" %)**toxic substances**(%%), (% style="color:#4472c4" %)**strong acids**(%%), (% style="color:#4472c4" %)**strong alkalis**(%%) and (% style="color:#4472c4" %)**various pure liquids**(%%) in high-temperature and high-pressure airtight containers.

)))

(((

The LoRa wireless technology used in LDDS20 allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.

)))

(((

LDDS20 is powered by (% style="color:#4472c4" %)**8500mA Li-SOCI2 battery**(%%); It is designed for long term use up to 10 years*.

)))

(((

Each LDDS20 pre-loads with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect if there is network coverage, after power on.

)))

)))

(((

(((

(% style="color:#4472c4" %) * (%%)Actually lifetime depends on network coverage and uplink interval and other factors.

)))

)))

)))

)))

[[image:1655255122126-327.png]]

== 1.2 Features ==

* LoRaWAN 1.0.3 Class A

67

* Ultra low power consumption

68

* Liquid Level Measurement by Ultrasonic technology

69

* Measure through container, No need to contact Liquid.

70

* Valid level range 20mm - 2000mm

71

* Accuracy: ±(5mm+S*0.5%) (S: Measure Value)

72

* Cable Length : 25cm

73

* Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865

74

* AT Commands to change parameters

75

* Uplink on periodically

76

* Downlink to change configure

77

* IP66 Waterproof Enclosure

78

* 8500mAh Battery for long term use

79

80

81

== 1.3 Suitable Container & Liquid ==

82

83

84

* Solid Wall container such as: steel, iron, glass, ceramics, non-foaming plastics etc.

85

* Container shape is regular, and surface is smooth.

86

* Container Thickness:

87

** Pure metal material. 2~~8mm, best is 3~~5mm

88

** Pure non metal material: <10 mm

89

* Pure liquid without irregular deposition.(% style="display:none" %)

== 1.4 Mechanical ==

[[image:image-20220615090910-1.png]]

96

97

98

[[image:image-20220615090910-2.png]]

99

100

(% style="display:none" %) (%%)

101

102

== 1.5 Install LDDS20 ==

103

104

105

(% style="color:blue" %)**Step 1**(%%): Choose the installation point.

106

107

LDDS20 (% style="color:red" %)**MUST**(%%) be installed on the container bottom middle position.

108

109

110

[[image:image-20220615091045-3.png]]

(((

(% style="color:blue" %)**Step 2**(%%): Polish the installation point.

)))

(((

For Metal Surface with paint, it is important to polish the surface, first use crude sand paper to polish the paint level , then use exquisite sand paper to polish the metal level to make it shine & smooth.

120

)))

121

122

[[image:image-20220615092010-11.png]]

123

124

125

No polish needed if the container is shine metal surface without paint or non-metal container.

126

127

[[image:image-20220615092044-12.png]]

(((

(% style="color:blue" %)**Step3: **(%%)Test the installation point.

)))

(((

Power on LDDS20, check if the blue LED is on, If the blue LED is on, means the sensor works. Then put ultrasonic coupling paste on the sensor and put it tightly on the installation point.

)))

(((

)))

(((

It is necessary to put the coupling paste between the sensor and the container, otherwise LDDS20 won't detect the liquid level.

145

)))

146

147

[[image:1655256160324-178.png||height="151" width="419"]][[image:image-20220615092327-13.png||height="146" width="260"]]

(((

After paste the LDDS20 well, power on LDDS20. In the first 30 seconds of booting, device will check the sensors status and BLUE LED will show the status as below. After 30 seconds, BLUE LED will be off to save battery life.

)))

(((

)))

(((

(% style="color:red" %)**LED Status:**

)))

* (((

Onboard LED: When power on device, the onboard LED will fast blink 4 times which means detect the sensor well.

)))

* (((

(% style="color:blue" %)**BLUE LED**(% style="color:red" %)** always ON**(%%): Sensor is power on but doesn't detect liquid. There is problem in installation point.

168

)))

169

* (((

170

(% style="color:blue" %)**BLUE LED**(% style="color:red" %)** slowly blinking**(%%): Sensor detects Liquid Level, The installation point is good.

)))

(((

LDDS20 will enter into low power mode at 30 seconds after system reset or power on, Blue LED will be off after that.

)))

(((

)))

(((

(% style="color:red" %)**Note 2:**

)))

(((

(% style="color:red" %)**Ultrasonic coupling paste** (%%) is subjected in most shipping way. So the default package doesn't include it and user needs to purchase locally.

)))

(((

)))

(((

)))

(((

(% style="color:blue" %)**Step4: **(%%)Install use Epoxy ab glue.

199

200

After ensuring that the ultrasonic coupling paste is applied to the sensor and adheres closely to the mounting point, and the sensor can work normally, add AB epoxy glue.

)))

(((

Prepare Eproxy AB glue.

)))

(((

Put Eproxy AB glue in the sensor and press it hard on the container installation point.

)))

(((

Reset LDDS20 and see if the BLUE LED is slowly blinking.

213

)))

214

215

[[image:image-20220615091045-8.png||height="203" width="341"]] [[image:image-20220615091045-9.png||height="200" width="284"]]

(((

(% style="color:red" %)**Note 1:**

)))

(((

Eproxy AB glue needs 3~~ 5 minutes to stable attached. we can use other glue material to keep it in the position.

)))

(((

)))

(((

(% style="color:red" %)**Note 2:**

)))

(((

(% style="color:red" %)**Eproxy AB glue**(%%) is subjected in most shipping way. So the default package doesn't include it and user needs to purchase locally.

)))

== 1.6 Applications ==

240

241

242

* Smart liquid control solution.

243

* Smart liquefied gas solution.(% style="display:none" %)

244

245

246

== 1.7 Precautions ==

247

248

249

* At room temperature, containers of different materials, such as steel, glass, iron, ceramics, non-foamed plastics and other dense materials, have different detection blind areas and detection limit heights.

250

* For containers of the same material at room temperature, the detection blind zone and detection limit height are also different for the thickness of the container.

251

* When the detected liquid level exceeds the effective detection value of the sensor, and the liquid level of the liquid to be measured shakes or tilts, the detected liquid height is unstable.(% style="display:none" %)

252

253

254

== 1.8 Pin mapping and power on ==

255

256

257

[[image:1655257026882-201.png]]

258

259

260

= 2. Configure LDDS20 to connect to LoRaWAN network =

261

262

== 2.1 How it works ==

(((

The LDDS20 is configured as LoRaWAN OTAA Class A mode by default. It has OTAA keys to join LoRaWAN network. To connect a LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and power on the LDDS20. If there is coverage of the LoRaWAN network, it will automatically join the network via OTAA and start to send the sensor value.

)))

(((

In case you can't set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>||anchor="H3.A0UsingtheATCommands"]]to set the keys in the LDDS20.

)))

== 2.2 Quick guide to connect to LoRaWAN server (OTAA) ==

(((

Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LG308>>url:http://www.dragino.com/products/lora/item/140-lg308.html]] as a LoRaWAN gateway in this example.

)))

(((

[[image:1655257698953-697.png]]

)))

(((

(((

The LG308 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.

)))

)))

(((

(((

)))

(((

(% style="color:blue" %)**Step 1**(%%): Create a device in TTN with the OTAA keys from LDDS20.

)))

)))

(((

(((

Each LDDS20 is shipped with a sticker with the default device keys, user can find this sticker in the box. it looks like below.

)))

)))

[[image:image-20230426085627-1.png||height="271" width="584"]]

(((

(((

For OTAA registration, we need to set **APP EUI/ APP KEY/ DEV EUI**. Some server might no need to set APP EUI.

)))

)))

(((

(((

Enter these keys in the LoRaWAN Server portal. Below is TTN V3 screen shot:

)))

)))

(((

(((

)))

(((

**Add APP EUI in the application**

)))

)))

[[image:image-20220610161353-4.png]]

337

338

[[image:image-20220610161353-5.png]]

339

340

[[image:image-20220610161353-6.png]]

341

342

343

[[image:image-20220610161353-7.png]]

You can also choose to create the device manually.

348

349

[[image:image-20220610161538-8.png]]

**Add APP KEY and DEV EUI**

354

355

[[image:image-20220610161538-9.png]]

(% style="color:blue" %)**Step 2**(%%): Power on LDDS20

360

361

362

Put a Jumper on JP2 to power on the device. ( The Switch must be in FLASH position).

363

364

[[image:image-20220615095102-14.png]]

(((

(% style="color:blue" %)**Step 3**(%%)**:** The LDDS20 will auto join to the TTN network. After join success, it will start to upload messages to TTN and you can see the messages in the panel.

)))

[[image:1654849068701-275.png]]

375

376

377

== 2.3 Uplink Payload ==

(((

(((

(((

LDDS20 will uplink payload via LoRaWAN with below payload format:

)))

(((

Uplink payload includes in total 8 bytes.

388

Payload for firmware version v1.1.4. . Before v1.1.3, there is only 5 bytes: BAT and Distance(Please check manual v1.2.0 if you have 5 bytes payload).

)))

)))

)))

(((

)))

(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)

398

|=(% style="width: 62.5px;background-color:#D9E2F3" %)(((

399

**Size(bytes)**

400

401

|(% style="width:62.5px" %)**Value**|(% style="width:62.5px" %)[[BAT>>||anchor="H2.3.1A0BatteryInfo"]]|(((

402

[[Distance>>||anchor="H2.3.2A0Distance"]]

403

(unit: mm)

404

)))|[[Digital Interrupt (Optional)>>||anchor="H2.3.3A0InterruptPin"]]|(((

405

[[Temperature (Optional )>>||anchor="H2.3.4A0DS18B20Temperaturesensor"]]

406

)))|[[Sensor Flag>>||anchor="H2.3.5A0SensorFlag"]]

407

408

[[image:1654850511545-399.png]]

409

410

411

=== 2.3.1 Battery Info ===

412

413

414

Check the battery voltage for LDDS20.

Ex1: 0x0B45 = 2885mV

Ex2: 0x0B49 = 2889mV

=== 2.3.2 Distance ===

(((

Get the distance. Flat object range 20mm - 2000mm.

)))

(((

For example, if the data you get from the register is __0x06 0x05__, the distance between the sensor and the measured object is(% style="color:#4472c4" %)** 0605(H) = 1541 (D) = 1541 mm.**

430

)))

431

432

* If the sensor value is 0x0000, it means system doesn't detect ultrasonic sensor.

433

* If the sensor value lower than 0x0014 (20mm), the sensor value will be invalid.(% style="display:none" %)

434

435

436

=== 2.3.3 Interrupt Pin ===

437

438

439

This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H3.2A0SetInterruptMode"]] for the hardware and software set up.

**Example:**

0x00: Normal uplink packet.

444

445

0x01: Interrupt Uplink Packet.

446

447

448

=== 2.3.4 DS18B20 Temperature sensor ===

449

450

451

This is optional, user can connect external DS18B20 sensor to the +3.3v, 1-wire and GND pin . and this field will report temperature.

**Example**:

If payload is: 0105H: (0105 & FC00 == 0), temp = 0105H /10 = 26.1 degree

456

457

If payload is: FF3FH : (FF3F & FC00 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.

458

459

(% style="color:red" %)**Note: DS18B20 feature is supported in the hardware version > v1.3 which made since early of 2021.**

460

461

462

=== 2.3.5 Sensor Flag ===

(((

0x01: Detect Ultrasonic Sensor

)))

(((

0x00: No Ultrasonic Sensor

)))

=== 2.3.6 Decode payload in The Things Network ===

475

476

477

While using TTN network, you can add the payload format to decode the payload.

478

479

480

[[image:1655261164557-670.png]]

481

482

(((

483

The payload decoder function for TTN V3 is here:

)))

(((

(((

LDDS20 TTN V3 Payload Decoder: [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]

)))

)))

== 2.4 Downlink Payload ==

494

495

496

By default, LDDS20 prints the downlink payload to console port.

497

498

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)

499

|(% style="background-color:#d9e2f3; color:#0070c0; width:208px" %)**Downlink Control Type**|(% style="background-color:#d9e2f3; color:#0070c0; width:56px" %)**FPort**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**Type Code**|(% style="background-color:#d9e2f3; color:#0070c0; width:154px" %)**Downlink payload size(bytes)**

500

|(% style="width:208px" %)TDC (Transmit Time Interval)|(% style="width:56px" %)Any|(% style="width:100px" %)01|(% style="width:154px" %)4

501

|(% style="width:208px" %)RESET|(% style="width:56px" %)Any|(% style="width:100px" %)04|(% style="width:154px" %)2

502

|AT+CFM|Any|05|4

503

|(% style="width:208px" %)INTMOD|(% style="width:56px" %)Any|(% style="width:100px" %)06|(% style="width:154px" %)4

**Examples:**

* (% style="color:blue" %)**Set TDC**

509

510

If the payload=0100003C, it means set the END Node's TDC to 0x00003C=60(S), while type code is 01.

511

512

Payload: 01 00 00 1E TDC=30S

513

514

Payload: 01 00 00 3C TDC=60S

515

516

517

* (% style="color:blue" %)**Reset**

518

519

If payload = 0x04FF, it will reset the LDDS20

520

521

522

* (% style="color:blue" %)**CFM**

523

524

Downlink Payload: 05000001, Set AT+CFM=1 or 05000000 , set AT+CFM=0

525

526

527

== 2.5 Show Data in DataCake IoT Server ==

(((

[[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:

)))

(((

)))

(((

(% style="color:blue" %)**Step 1**(%%)**: Be sure that your device is programmed and properly connected to the network at this time.**

)))

(((

(% style="color:blue" %)**Step 2**(%%)**: To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:**

)))

[[image:1654592790040-760.png]]

548

549

550

[[image:1654592800389-571.png]]

551

552

553

(% style="color:blue" %)**Step 3**(%%)**: Create an account or log in Datacake.**

554

555

(% style="color:blue" %)**Step 4**(%%)**: Search the LDDS75 and add DevEUI.(% style="color:red" %)(Note: LDDS20 use same payload as LDDS75)(%%)**

556

557

558

[[image:1654851029373-510.png]]

559

560

561

After added, the sensor data arrive TTN V3, it will also arrive and show in Datacake.

562

563

[[image:image-20220610165129-11.png||height="595" width="1088"]]

564

565

566

== 2.6 LED Indicator ==

567

568

569

The LDDS20 has an internal LED which is to show the status of different state.

570

571

572

* Blink once when device power on.

573

* The device detects the sensor and flashes 5 times.

574

* Solid ON for 5 seconds once device successful Join the network.

575

* Blink once when device transmit a packet.(% style="display:none" %)

576

577

578

== 2.7 Firmware Change Log ==

(((

**Firmware download link: **[[https:~~/~~/www.dropbox.com/sh/26spxc7wr3aduwi/AACQSJESTaVkWO5JVHLvdt0Za?dl=0>>https://www.dropbox.com/sh/26spxc7wr3aduwi/AACQSJESTaVkWO5JVHLvdt0Za?dl=0]]

)))

(((

**Firmware Upgrade Method: **[[Firmware Upgrade Instruction>>doc:Main.Firmware Upgrade Instruction for STM32 base products.WebHome]]

)))

== 2.8 Battery & Power Consumption ==

591

592

593

LDDS20 uses ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.

594

595

[[**Battery Info & Power Consumption Analyze**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .

596

597

598

= 3. Using the AT Commands =

599

600

== 3.1 Access AT Commands ==

601

602

603

LDDS20 supports AT Command set in the stock firmware. You can use a USB to TTL adapter to connect to LDDS20 for using AT command, as below.

604

605

606

[[image:image-20220610172924-4.png||height="483" width="988"]]

607

608

609

Or if you have below board, use below connection:

610

611

612

[[image:image-20220610172924-5.png]]

(((

In the PC, you need to set the serial baud rate to (% style="color:green" %)**9600**(%%) to access the serial console for LDDS20. LDDS20 will output system info once power on as below:

)))

[[image:image-20220610172924-6.png||height="601" width="860"]]

621

622

Below are the available commands, a more detailed AT Command manual can be found at [[AT Command Manual>>https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSE01/]].

623

624

625

AT+<CMD>? : Help on <CMD>

AT+<CMD> : Run <CMD>

AT+<CMD>=<value> : Set the value

630

631

AT+<CMD>=? : Get the value

632

633

634

(% style="color:#037691" %)** General Commands :**

AT : Attention

AT? : Short Help

ATZ : MCU Reset

AT+TDC : Application Data Transmission Interval

643

644

645

(% style="color:#037691" %)** Keys, IDs and EUIs management :**

646

647

AT+APPEUI : Application EUI

648

649

AT+APPKEY : Application Key

650

651

AT+APPSKEY : Application Session Key

652

653

AT+DADDR : Device Address

AT+DEUI : Device EUI

AT+NWKID : Network ID (You can enter this command change only after successful network connection)

658

659

AT+NWKSKEY : Network Session Key Joining and sending date on LoRa network

660

661

AT+CFM : Confirm Mode

662

663

AT+CFS : Confirm Status

664

665

AT+JOIN : Join LoRa? Network

666

667

AT+NJM : LoRa? Network Join Mode

668

669

AT+NJS : LoRa? Network Join Status

670

671

AT+RECV : Print Last Received Data in Raw Format

672

673

AT+RECVB : Print Last Received Data in Binary Format

674

675

AT+SEND : Send Text Data

676

677

AT+SENB : Send Hexadecimal Data

678

679

680

(% style="color:#037691" %)** LoRa Network Management :**

681

682

AT+ADR : Adaptive Rate

683

684

AT+CLASS : LoRa Class(Currently only support class A

685

686

AT+DCS : Duty Cycle Setting

687

688

AT+DR : Data Rate (Can Only be Modified after ADR=0)

689

690

AT+FCD : Frame Counter Downlink

691

692

AT+FCU : Frame Counter Uplink

693

694

AT+JN1DL : Join Accept Delay1

695

696

AT+JN2DL : Join Accept Delay2

697

698

AT+PNM : Public Network Mode

699

700

AT+RX1DL : Receive Delay1

701

702

AT+RX2DL : Receive Delay2

703

704

AT+RX2DR : Rx2 Window Data Rate

705

706

AT+RX2FQ : Rx2 Window Frequency

707

708

AT+TXP : Transmit Power

709

710

711

(% style="color:#037691" %)** Information :**

712

713

AT+RSSI : RSSI of the Last Received Packet

714

715

AT+SNR : SNR of the Last Received Packet

716

717

AT+VER : Image Version and Frequency Band

718

719

AT+FDR : Factory Data Reset

720

721

AT+PORT : Application Port

722

723

AT+CHS : Get or Set Frequency (Unit: Hz) for Single Channel Mode

724

725

AT+CHE : Get or Set eight channels mode, Only for US915, AU915, CN470

726

727

728

== 3.2 Set Interrupt Mode ==

729

730

731

Feature, Set Interrupt mode for GPIO_EXIT.

732

733

(% style="color:#037691" %)**Downlink Command: AT+INTMOD**(% style="display:none" %)

734

735

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)

736

|(% style="background-color:#d9e2f3; color:#0070c0; width:155px" %)**Command Example**|(% style="background-color:#d9e2f3; color:#0070c0; width:188px" %)**Function**|(% style="background-color:#d9e2f3; color:#0070c0; width:177px" %)**Response**

737

|(% style="width:155px" %)AT+INTMOD=?|(% style="width:187px" %)Show current interrupt mode|(% style="width:177px" %)(((

738

0

739

OK

740

the mode is 0 = No interruption

741

)))

742

|(% style="width:155px" %)AT+INTMOD=2|(% style="width:187px" %)(((

743

Set Transmit Interval

744

745

1. (Disable Interrupt),

746

1. (Trigger by rising and falling edge),

747

1. (Trigger by falling edge)

748

1. (Trigger by rising edge)

749

)))|(% style="width:177px" %)(((

750

OK

751

Set transmit interval to 60000ms = 60 seconds

)))

(((

(% style="color:#037691" %)**Downlink Command: 0x06**

)))

(((

Format: Command Code (0x06) followed by 3 bytes.

)))

(((

(((

This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.

)))

)))

* (((

Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode

771

)))

772

* (((

773

Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger

)))

(((

(% style="display:none" %) (%%)

)))

(((

)))

= 4. FAQ =

== 4.1 What is the frequency plan for LDDS20? ==

787

788

789

LDDS20 use the same frequency as other Dragino products. User can see the detail from this link: [[Introduction>>doc:Main.End Device Frequency Band.WebHome||anchor="H1.Introduction"]]

790

791

792

== 4.2 How to change the LoRa Frequency Bands/Region ==

793

794

795

You can follow the instructions for [[how to upgrade image>>||anchor="H2.7A0200BFirmwareChangeLog"]].

796

When downloading the images, choose the required image file for download.

797

798

799

= 5. Trouble Shooting =

800

801

== 5.1 Why I can't join TTN V3 in US915 / AU915 bands? ==

802

803

804

It is due to channel mapping. Please see below link: [[Frequency band>>doc:Main.LoRaWAN Communication Debug.WebHome||anchor="H2.NoticeofUS9152FCN4702FAU915Frequencyband"]]

805

806

807

== 5.2 AT Command input doesn't work ==

808

809

810

In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.

811

812

813

== 5.3 Why i always see 0x0000 or 0 for the distance value? ==

(((

LDDS20 has a strict [[**installation requirement**>>||anchor="H1.5A0InstallLDDS20"]]. Please make sure the installation method exactly follows up with the installation requirement. Otherwise, the reading might be always 0x00.

818

819

If you have followed the instruction requirement exactly but still see the 0x00 reading issue, please. please double-check the decoder, you can check the raw payload to verify.

)))

= 6. Order Info =

Part Number **:** (% style="color:blue" %)**LDDS20-XX**

827

828

829

(% style="color:blue" %)**XX**(%%)**: **The default frequency band

830

831

* (% style="color:red" %)**AS923 **(%%)**:** LoRaWAN AS923 band

832

* (% style="color:red" %)**AU915 **(%%)**:** LoRaWAN AU915 band

833

* (% style="color:red" %)**EU433 **(%%)**:** LoRaWAN EU433 band

834

* (% style="color:red" %)**EU868 **(%%)**:** LoRaWAN EU868 band

835

* (% style="color:red" %)**KR920 **(%%)**:** LoRaWAN KR920 band

836

* (% style="color:red" %)**US915 **(%%)**:** LoRaWAN US915 band

837

* (% style="color:red" %)**IN865 **(%%)**:** LoRaWAN IN865 band

838

* (% style="color:red" %)**CN470 **(%%)**:** LoRaWAN CN470 band

= 7. Packing Info =

(((

**Package Includes**:

)))

* (((

LDDS20 LoRaWAN Liquid Level Sensor x 1

)))

(((

(% style="color:red" %)**Note:**

)))

(((

(((

(% style="color:red" %)**Ultrasonic coupling paste**(%%) and(% style="color:red" %)** Eproxy AB glue**(%%) are subjected in most shipping way. So the default package doesn't include it and user needs to purchase locally.

)))

)))

(((

)))

(((

**Dimension and weight**:

)))

* (((

Device Size: cm

)))

* (((

Device Weight: g

)))

* (((

Package Size / pcs : cm

)))

* (((

Weight / pcs : g

)))

= 8. Support =

* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.

890

* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]].

Wiki source code of LDDS20 - LoRaWAN Ultrasonic Liquid Level Sensor User Manual

Applications

Navigation