Wiki source code of Instruction for LA66 Peer to Peer firmware
Show last authors
author | version | line-number | content |
---|---|---|---|
1 | = Overview: = | ||
2 | |||
3 | This instruction is for how to use Peer to Peer firmware in LA66. | ||
4 | |||
5 | |||
6 | = Firmware Location: = | ||
7 | |||
8 | Click[[ here>>https://www.dropbox.com/sh/dq03kkfdrqnhy66/AACpHIcKYMa4o1IySKtVoeENa?dl=0]] to download the firmware and update it to LA66 according to the instruction for different boards. | ||
9 | |||
10 | |||
11 | = How to use? = | ||
12 | |||
13 | |||
14 | = AT Command Set. = | ||
15 | |||
16 | == Set TX and RX Bandwidth == | ||
17 | |||
18 | Set TX and RX BandWidth (0 ~~ 9) | ||
19 | 0: 125 kHz | ||
20 | 1: 250 kHz | ||
21 | 2: 500 kHz | ||
22 | 3: 62.5 kHz | ||
23 | 4: 41.67 kHz | ||
24 | 5: 31.25 kHz | ||
25 | 6: 20.83 kHz | ||
26 | 7: 15.63 kHz | ||
27 | 8: 10.42 kHz | ||
28 | 9: 7.81 kHz | ||
29 | |||
30 | |||
31 | Default Value: AT+BW=0,0 ~/~/ BandWidth: 125kHz ,125kHz | ||
32 | |||
33 | Range: (0 ~~ 9) | ||
34 | |||
35 | |||
36 |