1.2 Specifications

Hardware System:

• CPU: Quad-core Cortex-A7 1.2Ghz
• RAM: 512MB
• eMMC: 4GB

Interface:

• 10M/100M RJ45 Ports x 1
• WiFi 802.11 b/g/n

Operating Condition:

• Work Temperature: -20 ~ 65°C
• Storage Temperature: -20 ~ 65°C
• Power Input: 5V, 2A, DC

1.3 Features

• Open Source Debian system
• Managed by Web GUI, SSH via WAN or WiFi
• Remote Management
• Auto-provisioning for batch deployment and management
• LoRa Gateway
• Built-in The Things Network local LoRaWAN server 
• Built-in  Node-Red local Application server 

1.4 Block Diagram

1.5 LED Indicators

LG01-V2 has totally four LEDs, They are:

➢ Power LED: This RED LED will be solid if the device is properly powered

➢ ETH LED:   This RGB LED will blink GREEN when the ETH port is connecting

➢ SYS LED:   This RGB LED will show different colors in different states:

                     ✓ SOLID GREEN: The device is alive with a LoRaWAN server connection.

                     ✓ BLINKING GREEN: a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together

                     ✓ SOLID RED: Device doesn't have an Internet connection.

➢ WIFI LED: This LED shows the WIFI interface connection status.

1.6 Button Intruction

LG01-V2 has a black toggle button, which is:

➢ Long press 4-5s                   : the gateway will reload the Network and Initialize wifi configuration

                                                      LED status:  ETH LED will BLINKIND BULE Until the reload is finished.

➢ Long press more than 10s:    the gateway will restore the factory settings.

                                                     LED status:  ETH LED will SOLID BULE Until the restore is finished.

2. Quick Start

The LG01-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.

In most cases, the first thing you need to do is make the LG01-v2 accessible to the network.

3. How to configure the LA66 module

3.1 Access the LA66 module

Users can access the LA66 module by running the following command, then select the option ''serial port setup":

And then, change the setting:

Note: Enter the corresponding letter to change the configuration, like A,B,C

Enter AT+CFG in the interface to get the configuration,

LG01v2 as Receiver: (configured as AT+RXMOD=65535,2)