Version 186.1 by Kilight Cao on 2023/02/08 14:15
Show last authors
1 (% style="text-align:center" %)
2 [[image:1651802206983-860.png||height="427" width="398"]]
3
4
5 (((
6
7
8
9 )))
10
11 **Table of Contents：**
12
13 {{toc/}}
14
15
16 = **1. Introduction** =
17
18
19 == **1.1 What is HP0D** ==
20
21
22 (((
23 The HP0D is an outdoor LoRaWAN Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi,Ethernet, optional 3G or 4G. The LoRa wireless allows users to send  data and reach extremely long ranges at low data rates.
24 )))
25
26 (((
27 HP0D has passed Helium Full Hotspot Approval. It supports the (% style="color:#037691" %)** miner feature from Helium** (% style="color:black" %) and has a built-in ATECC608 encryption chip. It can be used as a Helium Full Hotspot  for the project. It also supports Semtech packet forwarder and LoRaWAN Station connection, it is fully compatible with LoRaWAN protocol.HP0D supports two LoRaWAN servers at the same time, (% style="color:#037691" %)**users can use HP0D for helium mining and connects max 2 x LoRaWAN servers at the same time**.
28 )))
29
30 (((
31 (% style="color:#037691" %)**Dragino already paid HP0D $40 onboarding cost and $10 location cost for each HP0D**. (% style="color:black" %)It is ready to use for Helium, user only needs to input HNT wallet address and use QR Code to onboarding HP0D when it arrives.
32 )))
33
34 (((
35 HP0D has pre-configured standard LoRaWAN frequency bands to use for different countries. Users can also customize the frequency bands to use in their own LoRaWAN network.
36
37
38
39 )))
40
41 == **1.2 Specifications** ==
42
43
44 **~ Hardware System:**
45 Linux Part:
46
47 * Raspberry Pi 4
48
49 **~ Interface:**
50
51 * 10M/100M RJ45 Ports x 1
52 * LoRaWAN Wireless
53 * Power Input: 12V 2A, DC
54
55 **~ Operating Condition:**
56
57 * Work Temperature: -20 ~~ 65°C
58 * Storage Temperature: -20 ~~ 65°C
59 * Power Input: 12V 2A, DC
60
61
62 == **1.3 Features** ==
63
64
65 * Open-Source Linux system
66 * RPi4 with 2G /4G or 8G RAM
67 * Managed by Web GUI, SSH via Internet
68 * Support Semtech UDP packet forwarder
69 * Support LoRaWAN Station Connection
70 * Support Helium Miner
71 * External fiberglass antenna
72 * Firmware OTA
73 * 802.3af PoE
74 * Lighting Protection
75 * Remote Monitoring
76 * Support Helium LoRaWAN server and secondary LoRaWAN server
77 * Include prepaid $40 onboarding cost and $10 location cost.
78 * [[Remote.it remote management>>url:https://wiki.dragino.com/index.php?title=Reverse_SSH_Access#Use_Remote.it_service]].
79
80
81 == **1.4 Label info and login name** ==
82
83
84 [[image:1651803959860-394.png||height="500" width="375"]]
85
86
87
88 === **1.4.1 Label information:** ===
89
90
91 (((
92 **Device hostname:**  (% style="background-color:yellow" %)dragino-xxxxxx(%%)
93 **Band**:  (% style="background-color:yellow" %)US915/AU915/AS923_1-AS923_4/KR920/EU868/IN865/RU864 (%%)
94 **Miner animal name**:  (% style="background-color:yellow" %)xxx-xxx-xxx (%%)
95 **Miner address**:  (% style="background-color:yellow" %)12xxxxxx (%%)
96 **Eth MAC address**:  (% style="background-color:yellow" %)A8: 40: 41: EF: FE: CD (%%)
97 **Login**:  (% style="background-color:yellow" %) root/d59f2d5b (the root is the Login account for the Web-UI and SSH.) (%%)
98 **SN**:  (% style="background-color:yellow" %) device serial number.
99 )))
100
101
102
103 = **2. Quick Start & Onboarding** =
104
105
106 (((
107 The HP0D is configured as a Wi-Fi Access Point by factory default. You can access and configure the HPD after connecting to its Wi-Fi network, or via its WAN Ethernet port.
108 )))
109
110
111
112 == **2.1  Connect HP0D Web UI** ==
113
114
115 === **2.1.1 via HP0D's Access Point** ===
116
117
118 At the first boot of HP0D, it will auto-generate a Wi-Fi network
119
120
121 [[image:1651804327535-321.png||height="325" width="199"]]
122
123
124 (% class="box infomessage" %)
125 (((
126 called  : (% style="color:red" %)**//HPD-dragino-xxxxxx//**
127 )))
128
129 (% class="box infomessage" %)
130 (((
131 with password:  (% style="color:red" %)**//dragino+dragino//**(%%)
132 You can use a PC to connect to this Wi-Fi network. The PC will get an IP address 10.130.1.xxx and the HP0D has the default  IP 10.130.1.1
133 )))
134
135
136 [[image:1651804397792-591.png||height="386" width="733"]]
137
138
139
140 === **2.1.2 Connect via HP0D hostname** ===
141
142
143 (((
144 Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address. If your PC(Windows/Mac/Ubuntu) connects to the same network with the HP0D, you can access the HP0D Web-UI via HP0D's hostname.
145 )))
146
147 Like:  (% style="background-color:yellow" %)__**//http:~/~/dragino-4ba54a//**__
148
149
150 [[image:1651804629009-699.png]]
151
152
153
154 === **2.1.3 Connect via Ethernet Port** ===
155
156
157 (((
158 //Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the HP0D.//
159 )))
160
161
162 (((
163 //**If you get the IP address from the router, like: (% class="mark" %)10.130.2.42(%%), you can use this IP address to connect the WEB UI or SSH access of HP0D.**//
164 )))
165
166
167 [[image:1651804782523-623.png]]
168
169
170
171 == **2.2 Generate QR Code** ==
172
173
174 (((
175 //Go to (% style="color:#037691" %)**Miner** ~-~-> **QR Generate**(%%), input your Helium Wallet Address, and click Generate.//
176 )))
177
178 (((
179 (% style="color:red" %)**//Note: After onboarding, this wallet will become the owner of this hotspot.//**
180
181
182 )))
183
184 [[image:image-20220506140312-1.png||height="435" width="438"]]
185
186
187
188 == **2.3 Onboarding Hotspot** ==
189
190
191 (((
192 //**1.** Download the Helium Hotspot APP from the Apple or Google Play store.//
193
194
195 )))
196
197 (((
198 (% style="color:red" %)**//Note: the APP version needs to be greater than 3.11.//**
199
200
201 )))
202
203 (((
204 //**2. **To add a hotspot, select (% style="color:blue" %)**“Hotspot”**(%%). On this tab, click the** (% style="color:blue" %)“+ Add Hotspot"(%%)** in the mid where choose the  (% style="color:blue" %)**"DRAGINO Miner HP0D"**//
205
206
207 )))
208
209 [[image:1651817186037-899.png||height="429" width="206"]] [[image:1651817194458-938.png||height="434" width="203"]]
210
211
212
213 //**3. **Scan the QR Code you generated in the previous step.//
214
215
216 [[image:1651828211026-220.png||height="405" width="191"]]
217
218
219
220 (((
221 //**4. **Onboarding your device//
222
223
224 )))
225
226 (((
227 Mobile APP will get info from the onboarding server. If the MAC address doesn't appear, it means the network connection of the mobile to the onboarding server might have an issue.  
228
229
230 )))
231
232 [[image:image-20220506141159-2.png||height="422" width="202"]] [[image:1651817529289-461.png||height="423" width="199"]]
233
234 [[image:1651828250802-391.png||height="421" width="197"]] [[image:1651828262668-768.png||height="416" width="196"]](% style="display:none" %)
235
236
237
238 **5. **//Check onboarding status where you can check from mobile~://
239
240
241 [[image:1651828391664-884.png||height="413" width="197"]] [[image:1651828401011-970.png||height="412" width="193"]](% style="display:none" %)
242
243
244 //You can also see the hotspot status in the below link~://
245
246 //https:~/~/explorer.helium.com/hotspots/**<(% class="mark" %)YOUR_HOTSPORT_KEY(%%)>**//
247
248 //Example~://
249
250
251 **//Green Synced means hotspot works normally.//**
252
253 [[image:1651828427715-679.png||height="374" width="635"]]
254
255
256
257 == **2.3 Onboarding Hotspot via Dragino App** ==
258
259
260 == **2.4 Set the Port Forwarding** ==
261
262
263 (((
264 //Helium Hotspots may not work if the Hotspot is behind a firewall or uses an incompatible NAT type. Other times it may be because of a router configuration or the internet is offline. This article aims to help resolve any issues you may have.//
265 )))
266
267 [[image:1651828514449-658.png]]
268
269 (((
270
271 )))
272
273 (((
274 (((
275 (% style="color:red" %)**Note: Please refer to more detailed Settings**
276 )))
277 )))
278
279 (((
280 (((
281 [[https:~~/~~/docs.helium.com/troubleshooting/network-troubleshooting/>>url:https://docs.helium.com/troubleshooting/network-troubleshooting/]]
282 )))
283 )))
284
285 (((
286 (((
287 [[https:~~/~~/www.youtube.com/watch?v=GKusVC7ovrE>>url:https://www.youtube.com/watch?v=GKusVC7ovrE]]
288 )))
289
290
291
292 )))
293
294 = **3. Check the configuration of HP0D** =
295
296
297 == **3.1 LoRa frequency configuration** ==
298
299
300 [[image:1651828687205-178.png||height="323" width="657"]]
301
302
303
304 == **3.2 Check the LoRaWAN Server Address** ==
305
306
307 [[image:image-20220607160428-1.png||height="472" width="654"]]
308
309
310
311 == **3.2.1 Configure the Secondary LoRaWAN Server** ==
312
313
314 [[image:image-20220607161130-2.png||height="501" width="1112"]]
315
316
317 [[image:image-20220607161603-3.png||height="557" width="1113"]]
318
319
320 [[image:image-20220607161812-4.png||height="699" width="1115"]]
321
322
323
324 == **3.3 Check Miner configuration** ==
325
326
327 [[image:image-20220506181408-1.png||height="451" width="513"]]
328
329
330 (((
331 (% style="color:red" %)//**Note: Check the Region and Height, the default height is greater than 1, if it is 1 please Click the mid button of Update, and then wait 10mins to check here.**//
332
333
334
335 == **//3.4 Check the Miner state//** ==
336
337
338 [[image:image-20220531171836-9.png||height="776" width="1155"]]
339
340
341 (((
342 (% style="color:red" %)//**Note: Absorption status can show whether the hotspot is working properly The p2p network can see how your hotspot is interacting with the surrounding hotspots usually, the nat_type should be '**//(% style="color:blue" %)**//none'//**
343 )))
344
345
346
347 )))
348
349 = **4. Installation of Antenna** =
350
351
352 (((
353 //HP0D uses Fiber Glass Antenna.//
354 )))
355
356 [[image:1651832158606-882.png]]
357
358 (((
359
360 )))
361
362 (((
363 //The user needs to connect the antenna cable's SMA connector to the HP03 and connect the N-Type connector to the antenna and install it as below~://
364 )))
365
366 (((
367 [[image:1651832205608-998.png||height="349" width="198"]]
368
369
370
371 )))
372
373 = **5. SSH Access for Linux console** =
374
375
376 (((
377 //Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router.//
378 )))
379
380 (((
381 //In the router's management portal, you should be able to find what IP address the router has assigned to the HP0D.//
382 )))
383
384 (((
385 //You can use this IP or hostname of HP0D to connect the WEB UI or SSH access of HP0D.//
386 )))
387
388 (((
389 //Make sure your PC and the HP0D are in the same network, the use an SSH tool (such as **[[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]**) to access it.//
390 )))
391
392
393 Below are screenshots:
394
395 [[image:image-20220608202027-1.png]]
396
397
398 (((
399 **//IP address:  IP address of HP0D or hostname of HP0D ((% class="mark" %)Such as dragino-7df4af(%%))//**
400 )))
401
402 (((
403 //Port:  (% style="color:green" %)**22**//
404 )))
405
406 (((
407 //User Name:      (% style="color:green" %)**root**//
408 )))
409
410 (((
411 //Password:         (% style="color:green" %)**Randomly generated （found on device's label）**//
412
413
414 )))
415
416 (((
417 //After logging in, you will be in the Linux console and can enter commands as shown below.//
418
419
420 )))
421
422 [[image:image-20220608202118-2.png]]
423
424
425
426 = **6. How to change the Wireless function of HP0D** =
427
428
429 //The wireless function is configured as AP by default and the web page does not support configuration,//
430
431 //if you want to configure it as STA(client)connection mode,//
432
433 //you can configure your WiFi info on the** (% style="color:blue" %)/Network/WiFi (%%)**page.//
434
435
436 (% style="color:red" %)**//Note: the wireless state is as AP//**
437
438
439 [[image:image-20220531170243-5.png||height="469" width="967"]]
440
441
442
443 == **6.1 Access WiFi configuration page** ==
444
445
446 [[image:image-20220531165803-2.png]]
447
448
449
450 == **6.2 Enter your WiFi information and save** ==
451
452
453 [[image:image-20220531165958-3.png]]
454
455
456
457 == **6.3 Change the WiFi mode.** ==
458
459
460 [[image:image-20220531170131-4.png]]
461
462
463
464 == **6.4 Wait system to restart** ==
465
466
467 [[image:image-20220531170501-7.png]]
468
469
470 (% style="color:red" %)//**Note: When the time remaining is finished it will turn to the home page.**//
471
472
473
474 == **6.5 Check the STA state** ==
475
476
477 [[image:image-20220531170705-8.png||height="484" width="990"]]
478
479
480
481 = **7. Trouble Shootings** =
482
483
484 == **7.1 How to get a wallet address?** ==
485
486
487 **//Download the helium Hotspots APP on the Apple or Google Play store to generate your own wallet.//**
488
489
490
491 == **7.2 Onboarding ~-~- Unable to access Web-UI ~-~-> Miner** ==
492
493
494 (((
495 //Users can log in to the HP0D, able to access other Web Pages except for the miner page.//
496 )))
497
498 (((
499 //If you first boot the device where you need to wait for 10 mins for the initialization connection to the Helium server.//
500
501
502
503 )))
504
505 == **7.3 Onboarding ~-~- Some parameters on the miner page show timeout** ==
506
507
508 [[image:image-20220506182042-2.png||height="250" width="516"]]
509
510
511 [[image:1651832455372-647.png||height="224" width="520"]]
512
513
514 **//HP0D is establishing a connection to the Helium server and is not finished. And you might see above.//**
515
516 **//It might relate to the network which might be up to 10mins.//**
517
518
519
520 == **7.4 Onboarding – Bad Gateway** ==
521
522
523 [[image:1651832583790-633.png]]
524
525
526 //**This is caused by the process leading too long which just needs to refresh the page.**//
527
528
529
530 == **7.5 Onboarding ~-~- Why did QR Code generate aways fail?** ==
531
532
533 [[image:image-20220506182424-3.png]]
534
535
536 (((
537 //**This may be related to the current block height, if the device is synchronizing to the latest height or if the device block height is much lower than the current height as the above picture like '1 1', the QR code generation may fail.**//
538
539
540
541 )))
542
543 == **7.6 Onboarding ~-~- Why is the QR Code not quite the same as the manual?** ==
544
545
546 [[image:1651832742262-209.png||height="297" width="365"]]
547
548
549 (((
550 //**Please ensure that you enter the correct wallet address and that your network is up and running, the user can click the button of (% style="color:red" %)‘Clean’(%%) to re-generate the QR Code.**//
551
552
553
554 )))
555
556 == **7.7 Onboarding – MAC address is ‘Unknown’ after scan QR Code** ==
557
558
559 [[image:1651832811038-780.png||height="462" width="216"]]
560
561
562 (((
563 //**If you see the MAC Address shows the (% style="color:red" %)‘Unknown’(%%) where is due to the provisioning error, please contact us to help you solve it.**//
564
565
566
567 )))
568
569 == **7.8 Onboarding – MAC address is being refreshed after scanning the QR Code** ==
570
571
572 (((
573 //**After scanning the QR Code, Mobile APP will connect to the Helium onboarding server and provide the public key/ wallet address to the onboarding server. The server will return the match MAC address for this hotspot.**//
574
575
576 )))
577
578 (((
579 //**If you don't see the MAC address, make sure your mobile has a good internet connection.**//
580 )))
581
582 [[image:1651832880009-473.png]]
583
584
585
586 == **7.9 HP0D Web ~-~-> Miner ~-~-> Version shows ‘short’** ==
587
588
589 **//This is caused by the server connection delay, which does not affect the regular use.//**
590
591 [[image:1651832959907-357.png]]
592
593
594
595 == **7.10 Mobile APP crash after scanning the QR Code?** ==
596
597
598 * //**Make sure you have input the correct Wallet address to generate QR Code.**//
599 * //**Make sure your mobile app uses the same wallet address as the one to generate QR Code.**//
600 * //**Make sure your mobile app's relevant permission is enabled.**//
601 * //**Known: The Android 11 version may cause this kind of issue.**//
602
603
604
605 == **7.11 Why the frequency/region is not the same as what I purchased?** ==
606
607
608 (((
609 //**Each HP0D is inspected and configured prior to shipping.**//
610 )))
611
612 (((
613 //**If your HP0D Web-UI – Miner region is not the same as the shell labels, please contact our support team that will solve this issue for you.**//
614
615
616
617 )))
618
619 == **7.12 Can use the frequency to a region where is no support?** ==
620
621
622 (((
623 //**Please make sure that the region supports this frequency, you can confirm the appropriate frequency through this link:**//
624 )))
625
626 (((
627 [[https:~~/~~/docs.helium.com/lorawan-on-helium/frequency-plans>>url:https://docs.helium.com/lorawan-on-helium/frequency-plans]]
628
629
630
631 )))
632
633 == **7.13 Can change the frequency of the HP0D Miner?** ==
634
635
636 //We do not recommend doing this, it may damage your device//
637
638
639
640 == **7.14 Low Reward and not transmit issue** ==
641
642
643 //We had released the 0524 version for the miner, Users can check the miner version in the HP0D web UI.//
644
645 //If it is lower than the 0524 version, users can manually upgrade it via the 'draginoups' command in the HP0D's CLI.//
646
647
648 [[image:image-20220527114519-1.png||height="579" width="851"]]
649
650
651
652 == **7.15 Why is my miner version not the latest** ==
653
654
655 //By default, as soon as a new version of helium is released, we will push the upgrade the same day.//
656
657 //However, the download and upgrade may fail due to the network.//
658
659 You can reboot your hotspot where the hotspot will try to upgrade when per booting.
660
661
662 //and **We offer manual check methods:**//
663
664 **// Use the "(% style="color:blue" %)draginoups" (%%)command to check//**
665
666
667 (% style="color:red" %)**//Note: How to access the hotspot CLI refer to ( Such as //**//[[(% style="color: red; color: red" %)**Step 5**//.//>>url:http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0D#H5.SSHAccessforLinuxconsole]]//(%%)//** )**//
668
669
670 [[image:image-20220601101358-1.png]]
671
672
673
674 == **7.16 Why is my miner running down?** ==
675
676
677 //the default, the Miner is managed by docker.//
678
679 //If you find the miner is offline where the miner is running down.//
680
681
682 **What You can do?**
683
684 (% style="color:blue" %)**1. Reboot the hotspot and check again.**
685
686 //Usually, if the miner is just down, then a reboot is the quickest way//
687
688
689 (% style="color:blue" %)**2. Reinstall the Miner manually.**
690
691 //If rebooting does not solve the problem you can reinstall MINER by one of the following methods//
692
693 (((
694 **1). There is an update button in the middle of the miner page, click this button and then the miner will be reinstalled.**
695 )))
696
697
698 (((
699 **2). Run the (% style="color:red" %)"//minerup updat//e"(%%) command to reinstall the miner**
700 )))
701
702
703
704 [[image:image-20220610094825-2.png||height="457" width="835"]]
705
706
707 [[image:image-20220610094755-1.png||height="706" width="834"]]
708
709
710
711 == **7.17 More commands for debugging.** ==
712
713
714 **I'm trapped somewhere, what can I do first?**
715
716
717 //dragino provides a method of self-testing//
718
719 //1.) Is Hotspot's Miner running?//
720
721 //2). Is the miner version up to date?//
722
723 //3). Is the height gap between local height and remote height kept within 100//
724
725
726 (((
727 (% style="color:red" %)**//Note: You can find the above three points on the Miner page, and If you are familiar with the Linux command line you can use the following command//**
728 )))
729
730
731 (% class="box infomessage" %)
732 (((
733 (((
734 minerup update  #~-~-> reinstall miner but not clearing memory
735 minerup flush  #~-~->  reinstall miner and clear memory
736 minerup snap  #~-~->  load a snap_short to sync the block height
737 minerup gap  #~-~->  check the height between local and remote.
738 draginoup  #~-~->  check the miner version gap between local and remote.
739 )))
740
741 (((
742
743 )))
744
745 (((
746 doker ps  #~-~-> show the miner running state
747 miner versions  #~-~-> show the miner  version
748 )))
749 )))
750
751
752
753 == **7.18 Why does my hotspot not have some of the features described in this WiKi** ==
754
755
756 (((
757 //**This is the result of the OTA not being updated in time**//
758 )))
759
760 (((
761 //**You can reboot your hotspot or upgrade these packages manually.**//
762 )))
763
764
765 (% class="box infomessage" %)
766 (((
767 (((
768 **apt update**
769 **apt install dragino***
770 )))
771 )))
772
773
774
775 = **8. How to flash a new OS for the hotspot, the hotspot's setting will be factory settings** =
776
777
778 The hotspot is based on the Rpi-4B so the OS has been installed on the SD card.
779
780 So you have to re-flash the image into the SD card.
781
782 (% style="background-color:yellow" %)**Warning:  Do not reset unless necessary**
783
784
785 (% style="color:blue" %)//**Preparations:**//
786
787 1. //Open the HP0D shell, and take out the SD card from the Raspberry PI 4B (Make sure the SD card is empty )//
788
789 2. //Download the OS image~: ( Such as **[[draginohp0d-1.9img>>url:http://repo.dragino.com/release/hp0d-image/draginohp0d-1.9.img]]** )//
790
791 3. //A card reader device//
792
793 4. //A Flash software tool ( Such as **[[balenaEtcher>>url:https://www.balena.io/etcher/]]** )//
794
795 5. //SD Card **[[formatter>>url:http://repo.dragino.com/release/tool/PanasonicSDFormatter.zip]]**//
796
797
798 (% style="color:blue" %)**HP0D's enclosure**
799
800
801 [[image:image-20220615204902-1.png||height="633" width="918"]]
802
803
804 [[image:image-20220615204917-2.png||height="1038" width="922"]]
805
806
807
808 === (% style="color:blue" %)**Step 1.  Formatting the SD Card**(%%) ===
809
810
811 [[image:image-20220609111027-9.png]]
812
813
814
815 === (% style="color:blue" %)**Step 2. Select the OS image **(%%) ===
816
817
818 [[image:image-20220609104907-8.png]]
819
820
821
822 === (% style="color:blue" %)**Step 3. Select the target **(%%) ===
823
824
825 [[image:image-20220609104637-2.png]]
826
827 [[image:image-20220609104701-3.png]]
828
829
830
831 === (% style="color:blue" %)**Step 4. Flash start**(%%) ===
832
833
834 [[image:image-20220609104727-4.png]]
835
836 [[image:image-20220609104741-5.png]]
837
838
839
840 === (% style="color:blue" %)**Flash Complete**(%%) ===
841
842
843 [[image:image-20220609104415-1.png]]
844
845
846 == **Step 4. Re-install the SD card into the hotspot and boot it** ==
847
848
849
850 == **Step 5. Configure the correct region for the miner** ==
851
852
853 **by the default, the factory settings apply to the US915.**
854
855 **if your region is not the US915, you have to configure the correct region for the miner.**
856
857
858 **Access the hotspot CLI, and run these Linux commands**
859
860
861 (% class="box infomessage" %)
862 (((
863 (((
864 ~#~##update the software of dragino
865 )))
866
867 (((
868 apt update
869 )))
870
871 (((
872 apt install dragino*
873 )))
874 )))
875
876 [[image:image-20220609150452-2.png||height="348" width="909"]]
877
878
879
880 (% class="box infomessage" %)
881 (((
882 (((
883 ~#~##configure the correct region for the miner and update it
884 )))
885
886 (((
887 uci set miner.general.region=<Region; Such as AS923_1/AU915/US915/EU868/IN865>
888 )))
889
890 (((
891 uci commit miner
892 )))
893
894 (((
895 minerup update
896 )))
897 )))
898
899 [[image:image-20220609151513-5.png]]
900
901
902
903 (% class="box infomessage" %)
904 (((
905 (((
906 ~#~##check the miner version
907 )))
908
909 (((
910 draginoups
911 )))
912 )))
913
914 [[image:image-20220609151419-3.png]]
915
916
917
918 (% class="box infomessage" %)
919 (((
920 (((
921 ~#~##unblock the function of wireless
922 rfkill unblock wlan
923 uci set wireless.general.mode=ap
924 uci commit wireless
925 )))
926 )))
927
928 [[image:image-20220609161204-1.png]]
929
930
931
932 = **9. How does the HP0D access to the network via a USB 4G Dongle** =
933
934
935 We have reserved enough space inside the HP0D to use a USB 4G Dongle,
936
937 so you can install a USB 4G Dongle in order for the hotspot to access the network via 4G.
938
939
940 (% style="color:green" %)//**Preparations:**//
941
942 //**1). A USB 4G Dongle, Such as HUAWEI E3327,ZTE...**//
943
944 //**2). A Sim card that can access the 4g network.**//
945
946 //**3). open the hotspot's shell.**//
947
948
949
950 == **9.1.  Open the HP0D shell and access the USB 4G Dongle into the Rpi.** ==
951
952
953 [[image:image-20220627153334-2.png]]
954
955
956
957 == **9.2. Checking the USB 4G Dongle network** ==
958
959
960 (((
961 We have installed drivers for common USB 4G Dongle,
962 )))
963
964 (((
965 and managed by NetworkManager, once hp0d detects an available USB 4G Dongle it will try to dial up the range network
966 )))
967
968
969 (% style="color:blue" %)**//HUAWEI-E3327//**
970
971 [[image:image-20220627154526-9.png||height="762" width="725"]]
972
973
974
975 (% style="color:blue" %)**//ZTE//**
976
977 [[image:image-20220627154201-5.png]]
978
979
980
981 = **10. PoE introduction** =
982
983
984 (((
985 //The HP0D is use the (% style="color:blue" %)**IEEE 802.3 af compliant PoE port**(%%) (input 44 ~~ 57 v, output 12V)//
986 )))
987
988 (((
989 //So you can use the PoE //switches// or PoE injector to power the device.//
990 )))
991
992
993 (((
994 (% style="color:red" %)**Note: The RJ45 Indicator light only represents the PoE power supply, so when you use DC to power the hotspot and the RJ45 indicator light is off  ~-~--> this is normal**
995 )))
996
997
998 (% style="background-color:yellow" %)**Wiring schematic:**
999
1000 [[image:image-20220616143347-1.png]]
1001
1002
1003
1004
1005 = **11. OTA Version Info** =
1006
1007
1008 == **When does the OTA update happen?** ==
1009
1010
1011 **//HP0D will check OTA update on a) Every Booting. b) Every Night. Below is the OTA update version info//**
1012
1013
1014
1015 == **# 2022/05/14** ==
1016
1017
1018 1. //Update to the latest miner version: miner-arm64_2022.05.13.0_GA//
1019 1. //Add postinst after auto-update//
1020 1. //Add Miner version mark.//
1021 1. //Add fast sync if miner GAP is large//
1022
1023
1024 == **# 2022/05/18** ==
1025
1026
1027 1. //Update minerup to speed up synchronized blocks//
1028
1029
1030 == **# 2022/05/24** ==
1031
1032
1033 1. //Update to the latest miner version: miner-arm64_2022.05.24.0_GA//
1034
1035
1036 == **# 2022/05/31** ==
1037
1038
1039 1. //Add WiFi STA icon display//
1040 1. //Optimize AP icon display//
1041 1. //Optimize home icon display//
1042 1. //Fix for Miner icon URL bug//
1043 1. //Add the secondary server configuration//
1044
1045
1046
1047
1048 = **12. Supports** =
1049
1050
1051 (((
1052 **//If you are experiencing issues and can’t solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
1053 )))
1054
1055 (((
1056 **//With your question as detailed as possible. We will reply and help you in the shortest.//**
1057
1058
1059
1060 )))
1061
1062 = **13. Order Info** =
1063
1064
1065 (% style="color:blue" %)**HP0D-XXX**
1066
1067 (% style="color:blue" %)**XXX**(%%): Frequency Band
1068
1069 * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
1070 * (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
1071 * (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
1072 * (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
1073 * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
1074 * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
1075
1076
1077
1078 = **14. Manufacturer Info** =
1079
1080
1081 (((
1082 **Shenzhen Dragino Technology Development co. LTD**
1083 )))
1084
1085 (((
1086 Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
1087 )))
1088
1089 (((
1090 Longcheng Street, LongGang District; Shenzhen 518116, China
1091
1092
1093
1094 )))
1095
1096 = **15. FCC Warning** =
1097
1098
1099 (((
1100 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1101 )))
1102
1103 (((
1104 ~-~- Reorient or relocate the receiving antenna.
1105 )))
1106
1107 (((
1108 ~-~- Increase the separation between the equipment and receiver.
1109 )))
1110
1111 (((
1112 ~-~- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
1113 )))
1114
1115 (((
1116 ~-~- Consult the dealer or an experienced radio/TV technician for help.
1117 )))
1118
1119 (((
1120 Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
1121 )))
1122
1123 (((
1124 The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
1125
1126
1127
1128 )))

Applications

Navigation

Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0