Show last authors
1 (% style="text-align:center" %)
2 [[image:1652409757234-446.png||height="399" width="399"]]
3
4
5
6
7
8
9
10 **Table of Contents:**
11
12 {{toc/}}
13
14
15
16
17
18
19
20
21 = 1. Introduction =
22
23
24 == 1.1 What is the DLOS8N ==
25
26
27 (((
28 The DLOS8N is an** (% style="color:#4f81bd" %)open source outdoor LoRaWAN Gateway(%%)**(% style="color:#4f81bd" %). (% style="color:black" %)It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.
29 )))
30
31 (((
32 DLOS8N supports (% style="color:#4f81bd" %)**Semtech packet forwarder** (% style="color:black" %)and (% style="color:#4f81bd" %)**LoRaWAN Station connection**, (% style="color:black" %)it is fully compatible with LoRaWAN protocol. DLOS8N includes a (% style="color:#4f81bd" %)**SX1302 LoRaWAN concentrator.**
33 )))
34
35 (((
36 DLOS8N has (% style="color:#4f81bd" %)**pre-configured standard LoRaWAN frequency bands** (% style="color:black" %)to use for different countries.User can also customize the frequency bands to use in their own LoRaWAN network.
37 )))
38
39 (((
40 DLOS8N can communicate with ABP LoRaWAN end node without LoRaWAN server. System integrator can use it to integrate with their existing IoT Service without set up own LoRaWAN server or use 3rd party LoRaWAN service.
41 )))
42
43 (((
44 DLOS8N supports (% style="color:#4f81bd" %)**auto-provision** (% style="color:black" %) for mass deployment and long term maintain. System intergrator can easily change the settings.
45
46
47 )))
48
49 [[image:1652411526195-923.png||height="494" width="731"]]
50
51
52
53 == 1.2 Specifications ==
54
55
56 (((
57 (% style="color:#037691" %)**Hardware System:**
58 )))
59
60 (((
61 (((
62 (% style="color:#037691" %)**Linux Part:**
63 )))
64 )))
65
66 * 400Mhz ar9331 processor
67 * 64MB RAM
68 * 16MB Flash
69
70 (% style="color:#037691" %)**Interface:**
71
72 * 10M/100M RJ45 Ports x 1
73 * WiFi : 802.11 b/g/n
74 * LoRaWAN Wireless
75 * Power Input: 12 ~~ 24 V DC, 2 A
76 * IEEE 802.3 af compliant PoE port (DC 37  ~~ 57 v)
77 * USB 2.0 host connector x 1
78 * Mini-PCI E connector x 1
79 * SX1302 + 2 x SX1250
80
81 (% style="color:#037691" %)**WiFi Spec:**
82
83 * IEEE 802.11 b/g/n
84 * Frequency Band: 2.4 ~~ 2.462GHz
85 * Tx power:
86 ** 11n tx power : mcs7/15: 11db     mcs0 : 17db
87 ** 11b tx power: 18db
88 ** 11g 54M tx power: 12db
89 ** 11g 6M tx power: 18db
90 * Wifi Sensitivity
91 ** 11g 54M : -71dbm
92 ** 11n 20M : -67dbm
93
94 (% style="color:#037691" %)**LoRa Spec:**
95
96 * Up to -140 dBm sensitivity with SX1250 Tx/Rx front-end
97 * 70 dB CW interferer rejection at 1 MHz offset
98 * Able to operate with negative SNR, CCR up to 9dB
99 * Emulates 49 x LoRa demodulators and 1 x (G)FSK demodulator
100 * Dual digital TX & RX radio front-end interfaces
101 * 10 programmable parallel demodulation paths
102 * Dynamic data-rate (DDR) adaptation
103 * True antenna diversity or simultaneous dual-band operation
104
105 (% style="color:#037691" %)**Cellular 4G LTE (optional):**
106
107 * Quectel: [[**EC25 LTE module**>>url:https://www.quectel.com/product/ec25minipcie.htm]]
108 * Standard Size SIM Slot
109 * 2 x 4G Sticker Antenna.
110 * Up to 150Mbps downlink and 50Mbps uplink data rates
111 * Worldwide LTE,UMTS/HSPA+ and GSM/GPRS/EDGE coverage
112 * MIMO technology meets demands for data rate and link reliability in modem wireless communication systems
113
114 (% style="color:#037691" %)**Power over Ethernet:**
115
116 * IEEE 802.3af compliant.
117 * Support wide input voltage range  37Vdc to 57Vdc.
118 * Thermal cut off.
119 * Short circuit protection.
120 * Over current protection
121 * Isolation level 4 KVrms.
122 * Enhanced surge protection
123
124 == 1.3 Features ==
125
126
127 * Open Source Embedded Linux system
128 * Managed by Web GUI, SSH via LAN or WiFi
129 * Support Semtech UDP packet forwarder
130 * Support LoRaWAN Station Connection
131 * Cellular Failover conntection(option)
132 * Direct Communication to LoRaWAN ABP Node
133 * LoRaWAN packet filtering
134 * Far seeing LED indicator
135 * Built-in GPS module for location & timing
136 * External fiber glass antenna
137 * Auto-Provision
138 * Remote Monitoring
139 * 802.3af PoE
140 * IP65
141 * Lighting Protection
142 * Power Consumption:12v ,300-500mA
143
144 == 1.4 Hardware System Structure ==
145
146
147 [[image:image-20220907154423-1.png]]
148
149
150
151 == 1.5 DLOS8N Applications ==
152
153
154 [[image:1652411671209-920.png||height="618" width="650"]]
155
156
157
158 == 1.6 LED Indicators ==
159
160
161 [[image:1652411720670-489.png]]
162
163
164 There is a waterproof triple color LED on DLOS8N enclosure, the meaning of the LED is:
165
166 (((
167 (((
168 * (((
169 (% style="color:green" %)**SOLID GREEN**: (% style="color:black" %)DLOS8N is alive with LoRaWAN server connection.
170 )))
171 )))
172
173 * (((
174 (% style="color:green" %)**BLINKING GREEN**:(% style="color:black" %) a) Device has internet connection but no LoRaWAN Connection.  or b) Device is in booting stage, in this stage, it will (% style="color:green" %)**BLINKING GREEN**(% style="color:black" %) for several seconds and then (% style="color:red" %)**RED** (% style="color:black" %)and (% style="color:#ffc000" %)**YELLOW** (% style="color:black" %)will blink together.
175 )))
176 * (((
177 (% style="color:red" %)**SOLID RED**: (% style="color:black" %)Device doesn't have Internet connection.
178
179
180
181
182 )))
183 )))
184
185 == 1.7 WiFi Direction ==
186
187
188 DLOS8N use directional WiFi Antenna. The best direction is as below:
189
190
191 [[image:1652412859663-161.png||height="341" width="333"]]
192
193
194
195 = 2. Access and Configure DLOS8N =
196
197
198 The DLOS8N is configured as a WiFi Access Point by default. User can access and configure the DLOS8N after connecting to its WiFi network, or via its Ethernet port.
199
200
201
202 == 2.1 Find IP address of DLOS8N ==
203
204
205 === 2.1.1 Connect via WiFi ===
206
207
208 [[image:1652412985720-934.png]]
209
210
211 At the first boot of DLOS8N, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(% style="color:black" %)with password:
212
213
214 [[image:1652413127647-377.png]]
215
216
217 (% style="background-color:yellow" %) **dragino+dragino**
218
219 (((
220 User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the DLOS8N has the default IP (% style="color:green" %)**10.130.1.1**
221
222
223
224 )))
225
226 === 2.1.2 Connect via Ethernet with DHCP IP from router ===
227
228
229 [[image:1652414114583-532.png]]
230
231
232 (((
233 (((
234 Alternatively, connect the DLOS8N Ethernet port to your router and DLOS8N will obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the DLOS8N. You can also use this IP to connect.
235 )))
236
237
238
239 )))
240
241 === 2.1.3 Connect via WiFi with DHCP IP from router ===
242
243
244 [[image:1652414137639-956.png]]
245
246
247 If the DLOS8N already connect to the router via WiFi, use can use the WiFi IP to connect to DLOS8N.
248
249
250
251 === 2.1.4 Connect via Ethernet with fall back ip ===
252
253
254 (((
255 The WAN port also has a [[fall back ip address>>||anchor="H10.3IconfiguredDLOS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] for access if user doesn't connect to uplink router. Click [[here>>||anchor="H10.3IconfiguredDLOS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] to see how to configure.
256 )))
257
258
259
260 == 2.2 Access Configure Web UI ==
261
262
263 **Web Interface**
264
265 Open a browser on the PC and type the DLOS8N ip address (depends on your connect method)
266
267 [[http:~~/~~/10.130.1.1/>>url:http://10.130.1.1/]] (Access via WiFi AP network)
268
269 or
270
271 http:~/~/IP_ADDRESS or [[http:~~/~~/ IP_ADDRESS:8000>>url:http://192.168.1.xx:8000]]
272
273
274 You will see the login interface of DLOS8N as shown below.
275
276 The account details for Web Login are:
277
278 (% style="color:#4f81bd" %)**User Name: root**
279
280 (% style="color:#4f81bd" %)**Password:   dragino**
281
282
283 [[image:1652414287022-223.png]]
284
285
286
287 = 3. Typical Network Setup =
288
289
290 == 3.1 Overview ==
291
292
293 The DLOS8N supports flexible network set up for different environments. This section describes the typical network topology. The network set up includes:
294
295 * **WAN Port Internet Mode**
296 * **WiFi Client Mode**
297 * **WiFi AP Mode**
298 * **Cellular Mode**
299
300
301
302
303 == 3.2 Use WAN port to access Internet ==
304
305
306 (((
307 By default, the DLOS8N is set to use the WAN port to connect to an upstream network. When you connect the DLOS8N's WAN port to an upstream router, DLOS8N will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:#4f81bd" %)**home page**:
308
309
310 )))
311
312 [[image:image-20220916112129-1.png]]
313
314
315
316 == 3.3 Access the Internet as a WiFi Client ==
317
318
319 (((
320 In the WiFi Client Mode, DLOS8N acts as a WiFi client and gets DHCP from an upstream router via WiFi.
321 )))
322
323 (((
324 (((
325 The settings for WiFi Client is under page (% style="color:#4f81bd" %)**System~-~-> WiFi ~-~-> WiFi WAN Client Settings**
326 )))
327 )))
328
329 [[image:1657089014716-109.png]]
330
331
332 (((
333 In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click Save & Apply to connect.
334
335
336
337 )))
338
339 == 3.4 Access the Internet via Cellular ==
340
341
342 (((
343 If the DLOS8N support 3G/4G Cellular modem option, When the label on the shell is displayed as Model : DLOS8N-EC25, it indicates that DLOS8 already has EC25 3G/4G modules,user can use it as main internet connection or back up.
344 )))
345
346 (((
347 (((
348 First, release the four screws of DLOS8N, pull out PCB and install SIM card as below:
349
350
351 )))
352 )))
353
354 [[image:1652420606018-181.png]]
355
356
357 (((
358 [[image:1652420718132-929.png||height="427" width="727"]]
359
360
361 )))
362
363 (((
364 The set up page is (% style="color:#4f81bd" %)**System ~-~-> Cellular**
365
366
367 )))
368
369 (((
370 While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
371
372
373 )))
374
375 (((
376 [[image:1652421032117-341.png||height="329" width="752"]]
377
378
379 )))
380
381 (% style="color:red" %)**Note** ***: For DLOS8N which doesn’t have the cellular module, this page will shows Cellular not detected.**
382
383
384
385 == 3.5 Check Internet connection ==
386
387
388 In the (% style="color:#4f81bd" %)**home**(%%) page, we can check the Internet connection.
389
390 * GREEN Tick ​​​​ [[image:1652436675869-206.png||height="14" width="15"]] : This interface has Internet connection.
391 * Yellow  Tick  [[image:1652436705761-420.png||height="15" width="15"]] : This interface has IP address but don't use it for internet connection.
392 * RED Cross    [[image:1652436787176-950.png||height="14" width="15"]] : This interface doesn't connected.
393
394
395
396 [[image:image-20220916112620-2.png]]
397
398
399
400 = 4. Example: Configure as a LoRaWAN gateway =
401
402
403 (((
404 DLOS8N is fully compatible with LoRaWAN protocol. It uses the legacy Semtech Packet forwarder to forward the LoRaWAN packets to server. The structure is as below.
405
406
407 )))
408
409 (((
410 [[image:image-20220513140429-1.png||height="565" width="824"]]
411 )))
412
413 This chapter describes how to use the DLOS8Nto work with
414
415 TheThingsNetwork v3(TTN v3)[[ LoRaWAN Server>>url:https://www.thethingsnetwork.org/]]  ([[www.thethingsnetwork.org>>url:http://www.thethingsnetwork.org/]])
416
417
418
419 == 4.1 Create a gateway in TTN V3 Server ==
420
421
422 (((
423 (% style="color:blue" %)**Step 1: Get a Unique gateway ID.**
424
425
426 )))
427
428 (((
429 (((
430 Every DLOS8N has a unique gateway id. The ID can be found at LoRaWAN page:
431 )))
432 )))
433
434 (((
435 [[image:1652421929753-168.png||height="403" width="739"]]
436 )))
437
438 The example gateway id is: (% style="color:green" %)**a840411e96744154**
439
440
441
442 (% style="color:blue" %)**Step 2: Sign up a user account in TTN server**
443
444
445 [[**https:~~/~~/account.thethingsnetwork.org/register**>>url:https://account.thethingsnetwork.org/register]]
446
447
448 [[image:1652422127479-258.png||height="346" width="738"]]
449
450
451
452 (% style="color:blue" %)**Step 3: Choose the TTNv3 Cluster Picker**
453
454
455 (((
456 [[image:1652422142236-792.png||height="356" width="737"]]
457
458
459 )))
460
461 (% style="color:red" %)**Note: Choose the cluster corresponds to a specific Gateway server address**
462
463
464 * Europe 1 (% style="color:red" %)corresponding Gateway server address: (% style="color:black" %)eu1.cloud.thethings.network
465 * North America 1 (% style="color:red" %)corresponding Gateway server address:** **(% style="color:black" %)nam1.cloud.thethings.network
466 * Australia 1 (% style="color:red" %)corresponding Gateway server address:** **(% style="color:black" %)au1.cloud.thethings.network
467 * Legacy V2 Console : (% style="color:red" %)TTN v2 shuts down in December 2021
468
469 (% style="color:blue" %)**Step 4: Create a Gateway**
470
471
472 [[image:1652422440891-514.png||height="360" width="747"]]
473
474 Click the Gateway icon and then click Add gateway.
475
476
477 Open the following page:
478
479 [[image:1657089352139-443.png]]
480
481
482 [[image:1657089363403-611.png]]
483
484
485 (((
486 (% style="color:red" %)**Notice: Gateway Server address must match the gateway configuration, otherwise you will have problem for End Node to join the network.**
487
488
489 )))
490
491 After creating the gateway, you can see the gateway info, as below.
492
493
494 [[image:1657089571089-281.png]]
495
496
497
498 == 4.2 Configure DLOS8N to connect to TTN v3 ==
499
500
501 (((
502 You can now configure the DLOS8N to let it connect to TTN network V3.
503 )))
504
505 (((
506 Make sure your DLOS8N has a working Internet Connection first.
507 )))
508
509 (((
510 Choose the right server provider and click (% style="color:#4f81bd" %)**Save&Apply**
511
512
513 )))
514
515 [[image:1657089586062-302.png]]
516
517
518 (% style="color:red" %)**Note: The server address must match the Gateway server address you choose in TTN V3.**
519
520
521 In the home page, we can see the LoRaWAN connection is ready now.
522
523 [[image:image-20220916113405-3.png||height="388" width="862"]]
524
525
526 In TTN v3 portal, we can also see the gateway is connected.
527
528 [[image:1657089753667-298.png]]
529
530
531
532 == 4.3 Configure frequency ==
533
534
535 (((
536 We also need to set the frequency plan in DLOS8N to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
537 )))
538
539
540 [[image:1652422737399-529.png||height="362" width="737"]]
541
542
543 In logread page, user can check the frequency actually used.
544
545 [[image:1652422763536-750.png||height="514" width="730"]]
546
547
548
549 == 4.4 Add a LoRaWAN End Device ==
550
551
552 (((
553 This section shows how to add a LoRaWAN End device to a LoRaWAN network and see the data from TTN web site.
554 )))
555
556 (((
557 We use [[LT-22222-L>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/156-lt-22222-l.html]] IO Controller as a reference device - the setup for other LoRaWAN devices will be similar.
558 )))
559
560 [[image:1652422794767-871.png]]
561
562 (((
563 (% style="color:blue" %)**Step 1**: (%%)Create a Device definition in TTN v3 with the OTAA keys from the example LT-22222-L IO Controller device.
564 )))
565
566 (((
567 Three codes are required to define the device in TTN v3:
568 )))
569
570 * **DEV EUI** - Unique ID code for a particular device.
571 * **APP EUI** - ID code for an Application defined in TTN v3.
572 * **APP Key** - Unique key to secure communications with a particular device.
573
574 (((
575
576
577 (((
578 A set of these codes are stored in each device by the manufacturer as the default codes for that particular device. Each device is shipped with a sticker with the default Device EUI as shown below.
579 )))
580 )))
581
582 [[image:1652422840936-838.png]]
583
584
585 (((
586 (% style="color:red" %)**Note: You may be able to change these codes in a device by using a configuration facility on the device e.g. the LT-22222 uses a serial port access and a series of AT commands.  Changing the codes may be necessary in the case where you have to use codes assigned by a LoRa WAN server.**
587
588
589 )))
590
591 (((
592 For the TTN v3 server, you can use the codes set in the device as in the following example.
593 )))
594
595 (((
596 Select **Add Application** to open the screen below.
597 )))
598
599
600 [[image:1657089795213-689.png]]
601
602 Open the **Application **select** Add end device**
603
604
605 Start Register the end device
606
607 [[image:1657089816539-483.png]]
608
609 (((
610 Select OTAA activation mode
611
612
613 )))
614
615 (((
616 The LoRaWAN version for your device should be provided by the manufacturer in a datasheet as LoRaWAN version or LoRaWAN specification. The most commonly used LoRaWAN versions are v1.0.2 and v1.0.3.
617 )))
618
619 [[image:1657089833529-558.png]]
620
621
622
623 First, input the End device ID, AppEUI and DevEUI.
624
625 [[image:1657089845985-297.png]]
626
627
628
629 Secondly, choose the corresponding frequency and LoRaWAN class capabilities.
630
631
632 [[image:1657089868506-654.png]]
633
634
635 (((
636 Finally, Application layer settings input the corresponding AppKey. Before saving the configuration, check that the data matches the device.
637
638
639 )))
640
641 (((
642 (% style="color:blue" %)**Step 2**: (%%)Power on LT-22222-L device and it will automatically join the TTN network. After joining successfully, it will start to upload messages to the TTN v3. Select the Live data tab and you will see the data appearing in the panel.
643
644
645 )))
646
647 (((
648 (% style="color:red" %)**Note that it may take some time for the device data to appear in the TTN v3 display.**
649
650
651 )))
652
653 [[image:1657089884131-489.png]]
654
655
656
657 = 5. Web Configure Pages =
658
659
660 == 5.1 Home ==
661
662
663 Shows the system running status.
664
665
666 [[image:image-20220916113702-4.png||height="331" width="727"]]
667
668
669 == 5.2 LoRa Settings ==
670
671
672 === 5.2.1 LoRa ~-~-> LoRa ===
673
674
675 (((
676 This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customized the band* as well.
677 )))
678
679 (((
680 Different DLOS8N hardware version can support different frequency range:
681 )))
682
683 * (% style="color:red" %)**868**(%%): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
684 * (% style="color:red" %)**915**(%%): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
685
686 (((
687
688
689 After user choose the frequency plan, he can see the actually frequency in used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**
690
691
692 )))
693
694 [[image:image-20220916114014-5.png||height="429" width="930"]]
695
696
697 (% style="color:red" %)**Note *: [[See this instruction for how to customize frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
698
699
700
701 === 5.2.2 LoRa ~-~-> ABP Decryption ===
702
703
704 (((
705 The DLOS8N can communicate with LoRaWAN ABP End Node without the need of LoRaWAN server. It can be used in some cases such as:
706 )))
707
708 * No internet connection.
709 * User wants to get data forward in gateway and forward to their server based on MQTT/HTTP, etc. (Combine ABP communication method and [[MQTT forward together>>doc:Main.MQTT Forward Instruction.WebHome]]).
710
711 (((
712 Detail of this feature: **[[Communication with ABP End Node>>doc:Main.Communicate with ABP End Node without LoRaWAN Network Server --- LG308.WebHome]]**
713
714
715 )))
716
717 [[image:image-20220916114346-7.png||height="363" width="886"]]
718
719
720
721 == 5.3 LoRaWAN Settings ==
722
723
724 === 5.3.1 LoRaWAN ~-~-> LoRaWAN ===
725
726
727 This page is for the connection set up to a general LoRaWAN Network server such as: [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]] etc.
728
729
730 [[image:image-20220916114929-8.png||height="716" width="871"]]
731
732
733 (% style="color:red" %)**Note:**
734
735 ~*: User can ignore the latitude and longitude settings here, DLOS8N will use the actually value from GPS module.
736
737 ~**: Packet filter is to drop the unwanted LoRaWAN packet, instruction see here:
738
739 **See:** **[[Filter unwanted LoRaWAN packets>>doc:Main.Filter unwanted LoRaWAN packets.WebHome]]**
740
741
742
743 === 5.3.2 LoRaWAN ~-~-> Amazon AWS-IoT ===
744
745
746 [[image:1657089933044-221.png]]
747
748
749 (((
750 Please see this instruction to know more detail and demo for how to connect to **[[AWS-IoT LoRaWAN Core>>doc:Main.AWS IoT Core for LoRaWAN.WebHome]].**
751
752
753
754 )))
755
756 === 5.3.3 LoRaWAN ~-~-> LORIOT ===
757
758
759 (((
760 Settings to communicate to LORIOT LoRaWAN Network Server: [[https:~~/~~/www.loriot.io/>>url:https://www.loriot.io/]]
761 )))
762
763 (((
764 Instruction: **[[Notes for LORIOT>>doc:Main.Notes for LORIOT.WebHome]]**
765
766
767 )))
768
769 [[image:1657089965935-695.png]]
770
771
772
773 == 5.4 MQTT Settings ==
774
775
776 If end nodes works in ABP mode, user can configure DLOS8N to transfer the data to MQTT broker,
777
778 Instruction: **[[MQTT Forward Instruction>>doc:Main.MQTT Forward Instruction.WebHome]]**
779
780
781 [[image:1657090037148-906.png]]
782
783
784
785 == 5.5 System ==
786
787
788 === 5.5.1 System ~-~-> System Overview ===
789
790
791 Shows the system info:
792
793
794 [[image:1657090055371-265.png]]
795
796
797
798 === 5.5.2 System ~-~-> General ( login settings) ===
799
800
801 [[image:1657090070500-921.png]]
802
803
804 (((
805 (% style="color:#037691" %)**__System Password:__**
806 )))
807
808 (((
809 There are two login for DLOS8N: (% style="color:#4f81bd" %)root /dragino (% style="color:black" %)or (% style="color:#4f81bd" %)admin /dragino. (% style="color:black" %)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
810 )))
811
812 (((
813 This page can be used to set the password for them.
814 )))
815
816 (((
817 (% style="color:#037691" %)**__Timezone:  __**(%%)Set device timezone.
818 )))
819
820 (((
821 (% style="color:#037691" %)**__Port forwarding:  __**(%%)Enable/Disable the HTTP and SSH access via WAN interface.
822
823
824
825 )))
826
827 === 5.5.3 System ~-~-> Network ===
828
829
830 [[image:1657090089790-368.png]]
831
832
833 (((
834 (% style="color:#037691" %)**__LAN Settings:   __**(%%)When the DLOS8N has the AP enable, LAN settings specify the network info for DLOS8N's own network.
835 )))
836
837 (((
838 (% style="color:#037691" %)__**WAN Settings: **__(%%)Setting for DLOS8N WAN port
839 )))
840
841 (((
842 (% style="color:#037691" %)__**WiFi Settings:  **__(%%)Setting for DLOS8N WiFi IP when use it as WiFi Client
843
844
845
846 )))
847
848 === 5.5.4 System ~-~-> WiFi ===
849
850
851 DLOS8N WiFi Settings.
852
853
854 [[image:1657090107468-438.png]]
855
856
857
858 === 5.5.5 System ~-~-> Cellular ===
859
860
861 While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
862
863
864 [[image:1657090204066-944.png]]
865
866
867 (% style="color:red" %)**Note *: For DLOS8N which doesn't have the cellular module, this page will shows Cellular not detected.**
868
869
870
871 === 5.5.6 System ~-~-> Network Status ===
872
873
874 [[image:1657090227373-729.png]]
875
876
877
878 === 5.5.7 System ~-~-> Remote Mgnt & Auto Provision ===
879
880
881 Auto Provision is the feature for batch configure and remote management. It can be used in below two cases:
882
883
884 [[image:1652429518191-846.png||height="332" width="733"]]
885
886 [[image:1652429527544-247.png||height="327" width="724"]]
887
888 [[image:image-20220916111123-1.png||height="345" width="729"]]
889
890
891 Please see this document for detail:
892
893 (((
894 [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf]]
895 )))
896
897
898 R-SSH is for remote access device and management, introduction for how to use: **[[Remote Access Gateway>>doc:Main.Monitor & Remote Access Gateway.WebHome]]**
899
900 [[image:1657090254561-321.png]]
901
902
903
904 === 5.5.8 System ~-~-> Firmware Upgrade ===
905
906
907 We keep improving the DLOS8N Linux side firmware for new features and bug fixes. Below are the links for reference.
908
909 * **Latest firmware**: [[LoRa Gateway Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware/]],
910
911 ( [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware/]] )
912
913
914 * **Change Log**: [[Firmware Change Log>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog]].
915
916 ( [[http:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog]] )
917
918
919 (((
920 The file named as (% style="color:green" %)**xxxxx–xxxxx-squashfs-sysupgrade.bin **(% style="color:black" %)is the upgrade Image. There are different methods to upgrade, as below.
921 )))
922
923 (((
924 (% style="color:green" %)**Web~-~-> System~-~-> Firmware Upgrade**
925 )))
926
927 [[image:1657090275952-901.png]]
928
929 Select the required image and click (% style="color:blue" %)**Flash Image.**(%%) The image will be uploaded to the device, and then click (% style="color:blue" %)**Process Update**(%%) to upgrade.
930
931
932 (% style="color:red" %)**NOTE**(%%): You normally need to (% style="color:blue" %)**//uncheck//** (%%)the (% style="color:blue" %)**Preserve Settings**(%%) checkbox when doing an upgrade to ensure that there is no conflict between the old settings and the new firmware. The new firmware will start up with its default settings.
933
934 The system will automatically boot into the new firmware after upgrade.
935
936 [[image:1657090298354-928.png]]
937
938 (% style="color:red" %)**NOTE***(%%): User can also upgrade firmware via Linux console
939
940 SCP the firmware to the system(% style="color:green" %)**/var**(%%)** **directory and then run
941
942 (% style="color:#4f81bd" %)**//root@OpenWrt:~~# /sbin/sysupgrade –n /var/Your_Image//**
943
944
945 (% style="color:red" %)**NOTE**(%%) : it is important to transfer the image in the /var directory, otherwise it may exceed the available flash size.
946
947
948
949 === 5.5.9 System ~-~-> Reboot/Reset ===
950
951
952 [[image:1657090333476-926.png]]
953
954 (((
955
956
957
958 )))
959
960 === 5.5.10 System ~-~-> Package Maintain ===
961
962
963 [[image:1657090378640-879.png]]
964
965 [[image:1657090349947-814.png]]
966
967 Place to show what package has installed and possible to upgrade packages.
968
969
970
971 == 5.6 LogRead ==
972
973
974 === 5.6.1 LogRead ~-~-> LoRa Log ===
975
976
977 Show the frequency for LoRa Radio and traffics.
978
979
980 [[image:1657090412413-660.png]]
981
982
983
984 === 5.6.2 LogRead ~-~-> System Log ===
985
986
987 Show the system log
988
989
990 [[image:1657090485508-496.png]]
991
992
993
994 = 6. More features =
995
996
997 == 6.1 More instructions ==
998
999
1000 [[LoRaWAN Gateway Instruction>>doc:Main.WebHome]](LoRaWAN Gateway)
1001
1002
1003
1004 = 7. Linux System =
1005
1006
1007 The DLOS8N is based on the OpenWrt Linux system. It is open source, and users are free to configure and modify the Linux settings.
1008
1009
1010
1011 == 7.1 SSH Access for Linux console ==
1012
1013
1014 User can access the Linux console via the SSH protocol. Make sure your PC and the DLOS8N are connected to the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows) to access it.
1015
1016 IP address:  IP address of DLOS8N
1017
1018 Port:  22 (via WiFi AP mode) or 2222 (via WAN Interface)
1019
1020 User Name:      (% style="color:green" %)**root**
1021
1022 Password:         (% style="color:green" %)**dragino** (% style="color:black" %)(default)
1023
1024 After logging in, you will be in the Linux console and can enter commands as shown below.
1025
1026 [[image:1652431588565-830.png]]
1027
1028 The “(% class="mark" %)**logread -f**(%%)” command can be used to debug how system runs.
1029
1030
1031 [[image:1657090508015-884.png]]
1032
1033
1034
1035 == 7.2 Edit and Transfer files ==
1036
1037
1038 (((
1039 The DLOS8N supports the (% style="color:green" %)**SCP protocol** (% style="color:black" %)and has a built-in (% style="color:green" %)**SFTP server**. (% style="color:black" %)There are many ways to edit and transfer files using these protocols.
1040 )))
1041
1042 (((
1043 In Windows, one of the easiest methods is using the [[WinSCP>>url:https://winscp.net/eng/index.php]] utility.
1044 )))
1045
1046 (((
1047 After establishing access via WinSCP to the device, you can use an FTP style window to drag / drop files to the DLOS8N, or edit the files directly in the windows.
1048
1049
1050 )))
1051
1052 (((
1053 Screenshot is as below:
1054 )))
1055
1056 [[image:1652431650755-450.png]]
1057
1058
1059
1060 == 7.3 File System ==
1061
1062
1063 (((
1064 The DLOS8N has a 16MB flash and a 64MB RAM. The /var and /tmp directories are in the RAM, so contents stored in /tmp and /var will be erased after rebooting the device. Other directories are in the flash and will remain after reboot.
1065 )))
1066
1067 (((
1068 The Linux system uses around 8MB ~~10MB flash size which means there is not much room for user to store data in the DLOS8N flash.
1069 )))
1070
1071 (((
1072 You can use an external USB flash memory device to extend the size of flash memory for storage.
1073 )))
1074
1075
1076
1077 == 7.4 Package maintenance system ==
1078
1079
1080 (((
1081 DLOS8N uses the OpenWrt [[**OPKG package maintenance system**>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]. There are more than 3000+ packages available in our package server for users to install for their applications. For example, if you want to add the **//iperf //** tool, you can install the related packages and configure DLOS8N to use **//iperf //**.
1082 )))
1083
1084 (((
1085 Below are some example **//opkg //** commands. For more information please refer to the [[OPKG package maintain system>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]** **([[https:~~/~~/oldwiki.archive.openwrt.org/doc/techref/opkg>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]])
1086 )))
1087
1088 (((
1089 **In Linux Console run:**
1090 )))
1091
1092 (((
1093 (% style="color:green" %)**root@dragino-169d30:~~# opkg update**           (% style="color:black" %)~/~/ to get the latest packages list
1094 )))
1095
1096 (((
1097 (% style="color:green" %)**root@dragino-169d30:~~# opkg list**    (% style="color:black" %) ~/~/shows the available packages
1098 )))
1099
1100 (((
1101 (% style="color:green" %)**root@dragino-169d30:~~# opkg install iperf ** (% style="color:black" %)~/~/ install iperf
1102 )))
1103
1104 The system will automatically install the required packages as shown below.
1105
1106
1107 (((
1108 (% style="background-color:#dcdcdc" %)//root@dragino-169d30:/etc/opkg# opkg install iperf//
1109 )))
1110
1111 (((
1112 (% style="background-color:#dcdcdc" %)//Installing iperf (2.0.12-1) to root…//
1113 )))
1114
1115 (((
1116 (% style="background-color:#dcdcdc" %)//Downloading //[[(% style="background-color: rgb(220, 220, 220); background-color: rgb(220, 220, 220)" %)//http:~~/~~/downloads.openwrt.org/snapshots/packages/mips_24kc/base/iperf_2.0.12-1_mips_24kc.ipk//>>url:http://downloads.openwrt.org/snapshots/packages/mips_24kc/base/iperf_2.0.12-1_mips_24kc.ipk]]
1117 )))
1118
1119 (((
1120 (% style="background-color:#dcdcdc" %)//Installing uclibcxx (0.2.4-3) to root…//
1121 )))
1122
1123 (((
1124 (% style="background-color:#dcdcdc" %)//Downloading //[[(% style="background-color: rgb(220, 220, 220); background-color: rgb(220, 220, 220)" %)//http:~~/~~/downloads.openwrt.org/snapshots/packages/mips_24kc/base/uclibcxx_0.2.4-3_mips_24kc.ipk//>>url:http://downloads.openwrt.org/snapshots/packages/mips_24kc/base/uclibcxx_0.2.4-3_mips_24kc.ipk]]
1125 )))
1126
1127 (((
1128 (% style="background-color:#dcdcdc" %)//Configuring uclibcxx.//
1129 )))
1130
1131 (((
1132 (% style="background-color:#dcdcdc" %)//Configuring iperf.//
1133
1134
1135
1136 )))
1137
1138 = 8. Upgrade Linux Firmware =
1139
1140
1141
1142 = 9. FAQ =
1143
1144
1145 == 9.1 How can I configure for a customized frequency band? ==
1146
1147
1148 (((
1149 See below link for how to customize frequency band: **[[How to customized LoRaWAN frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
1150 )))
1151
1152 (((
1153
1154
1155
1156 )))
1157
1158 == 9.2 Can I connect DLOS8N to LORIOT? ==
1159
1160
1161 (((
1162 Yes, the set up instruction is here: **[[Notes for LORIOT>>doc:Main.Notes for LORIOT.WebHome]]**
1163 )))
1164
1165
1166
1167 == 9.3 Can I make my own firmware for the gateway, where can I find the source code? ==
1168
1169
1170 (((
1171 Yes, You can make your own firmware for the DLOS8N for branding purposes or to add customized applications.
1172 )))
1173
1174 (((
1175 The source code and compile instructions can be found at: [[https:~~/~~/github.com/dragino/openwrt_lede-18.06>>url:https://github.com/dragino/openwrt_lede-18.06]]
1176 )))
1177
1178
1179
1180 == 9.4 Can I use 868Mhz version for 915Mhz bands? ==
1181
1182
1183 It is possible but the distance will be very short, you can select US915 frequency band in 868Mhz version hardware. It will work but you will see the performance is greatly decreased because the 868Mhz version has an RF filter for band 863~~870Mhz, all other frequencies will have high attenuation.
1184
1185
1186
1187 = 10. Trouble Shooting =
1188
1189
1190 == 10.1 I get kernel error when install new package, how to fix? ==
1191
1192
1193 In some cases, when installing a package with **//opkg//**, it will generate a kernel error such as below due to a mismatch I the kernel ID:
1194
1195 (% style="background-color:yellow" %)root@dragino-16c538:~~# opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk
1196
1197 (% style="background-color:yellow" %)Installing kmod-dragino2-si3217x (3.10.49+0.2-1) to root…
1198
1199 (% style="background-color:yellow" %)Collected errors:
1200
1201 (% style="background-color:yellow" %)* satisfy_dependencies_for: Cannot satisfy the following dependencies for kmod-dragino2-si3217x:
1202
1203 (% style="background-color:yellow" %)*      kernel (= 3.10.49-1-4917516478a753314254643facdf360a) *
1204
1205 (% style="background-color:yellow" %)* opkg_install_cmd: Cannot install package kmod-dragino2-si3217x.
1206
1207 (((
1208 In this case, you can use the –force-depends option to install such package as long as the actual kernel version is the same.
1209 )))
1210
1211 (% style="background-color:yellow" %)Opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk –force-depends
1212
1213
1214
1215 == 10.2 How to recover the DLOS8N if the firmware crashes ==
1216
1217
1218 (((
1219 Please follow this instruction to recover your gateway:  **[[Recover Gateway>>doc:Main.How to Recover Gateway if can't access it.WebHome]]**
1220 )))
1221
1222 (((
1223
1224
1225
1226 )))
1227
1228 == 10.3 I configured DLOS8N for WiFi access and lost its IP. What to do now? ==
1229
1230
1231 [[image:1657090540821-317.png]]
1232
1233
1234 (((
1235 The DLOS8N has a fall-back IP address on its WAN port. This IP is always enabled so you can use the fall-back IP to access DLOS8N no matter what the WiFi IP is. The fall back IP is useful for connecting and debug the unit.
1236
1237
1238 )))
1239
1240 (((
1241 (% style="color:red" %)**Note: fallback IP can be disabled in the WAN and DHCP page.**
1242 )))
1243
1244
1245 (((
1246 (% style="color:blue" %)**Steps to connect via fall back IP:**
1247 )))
1248
1249 (((
1250 ~1. Connect PC's Ethernet port to DLOS8N's WAN port
1251 )))
1252
1253 (((
1254 2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
1255 )))
1256
1257 (((
1258
1259
1260 As below photo:
1261
1262
1263 )))
1264
1265 [[image:1652435256286-879.png]]
1266
1267
1268 3. In the PC, use IP address 172.31.255.254 to access the DLOS8N via Web or Console.
1269
1270
1271 Please note the latest firmware uses port 8000 for http and 2222 for ssh access.
1272
1273
1274
1275 = 11. Order Info =
1276
1277
1278 **//PART: (% style="color:blue" %)DLOS8N-XXX-YYY//(%%)**
1279
1280 (% style="color:blue" %)**//XXX~://**(%%)**// Frequency Band//**
1281
1282 * (% style="color:red" %)** 868**(%%) : valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
1283 * (% style="color:red" %)** 915**(%%):  valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
1284
1285 (% style="color:blue" %)**//YYY~://**(%%)**// 4G Cellular Option//**
1286
1287 * (% style="color:red" %)** E**(% style="color:black" %):  EMEA, Korea, Thailand, India.
1288 * (% style="color:red" %)** A**(% style="color:black" %):  North America/ Rogers/AT&T/T-Mobile.
1289 * (% style="color:red" %)** AU**(% style="color:black" %): Latin America, New Zeland, Taiwan
1290 * (% style="color:red" %)** J**(% style="color:black" %):  Japan, DOCOMO/SoftBank/ KDDI
1291
1292 More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
1293
1294
1295
1296 = 12. Packing Info =
1297
1298
1299 (((
1300 **Package Includes**:
1301 )))
1302
1303 * DLOS8N LoRaWAN Gateway x 1
1304 * Stick Antenna for LoRa RF part. Frequency is one of 470 or 868 or 915Mhz depends the model ordered
1305 * Packaging with environmental protection paper box
1306
1307 (((
1308 **Dimension and weight**:
1309 )))
1310
1311 * Device Size: 26 x 9 x 8.5 cm
1312 * Weight: 450g
1313 * Package Size: 49 x 19.5 x x 19Package Size: 4912 cm
1314 * Weight: 2.5kg
1315
1316
1317 = 13. Support =
1318
1319
1320 * Try to see if your questions already answered in the [[wiki>>doc:Main.WebHome]].
1321 * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8.
1322 Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before mentioned schedule.
1323 * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to:  [[support@dragino.com>>url:file:///C:/Users/11315/Documents/D:/Projects/LoRa%20Product%20Line/LG308%20Picocell%20Gateway/LG308/LG308%20%25E8%25AF%25B4%25E6%2598%258E%25E4%25B9%25A6/support@dragino.com]]
Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0