UART Access for LoRa ST v4 base model
Version 10.1 by Edwin Chen on 2022/12/24 17:43
LoRaST v4 base Hardware
Below hardware use LoRaST v4 module. They module support UART Access for AT Command and Firmware Upgrade.
| Model | Mother Board | UART for AT Commands | UART for Upgrade Firmware |
|---|---|---|---|
PS-LB | SIB | Instruction | Instruction |
UART for AT Commands
Generate software set up for AT Commands via UART
- Use a general serial tool.
- Connect PC to device's UART interface
- Set up serial tool with : BaudRate: 9600, databit:8, No parity, No flow control.
UART Connection for SIB mother board
UART for Firmware Upgrade