Wiki source code of Set uplinkdwell time
Show last authors
author | version | line-number | content |
---|---|---|---|
1 | (% class="wikigeneratedid" %) | ||
2 | **Contents:** | ||
3 | |||
4 | {{toc/}} | ||
5 | |||
6 | = 1. Introduction = | ||
7 | |||
8 | This chapter introduces how users can change the uplinkdwell time. | ||
9 | |||
10 | |||
11 | = 2. Default uplinkdwelltime = | ||
12 | |||
13 | Take AS923 frequency band as an example. We can see the spread spectrum factor corresponding to the data rate. | ||
14 | |||
15 | [[image:image-20220527091341-1.png]] | ||
16 | |||
17 | The device default uplinkdwelltime=1, there are SF7, SF8, SF9 and SF10. | ||
18 | |||
19 | If users want to ues SF11 and SF12, they need to set uplinkdwelltime=0. | ||
20 | |||
21 | Users can use AT commands to set uplinkdwell time. | ||
22 | |||
23 | [[image:https://wiki.dragino.com/images/thumb/b/bb/Uplinkdwelltime1.png/600px-Uplinkdwelltime1.png||alt="Uplinkdwelltime1.png" height="511" width="600"]] | ||
24 | |||
25 | [[image:https://wiki.dragino.com/images/thumb/7/78/Uplinkdwelltime2.png/600px-Uplinkdwelltime2.png||alt="Uplinkdwelltime2.png" height="301" width="600"]] | ||
26 | |||
27 | = 3. Use AT command to set uplinkdwell time = | ||
28 | |||
29 | Since Dragino LoRaWAN Stack DR_LWS_005, user is able to set the uplink Dwelltime in AS923 and AU915 manual or use a application side downlink command to set it. | ||
30 | |||
31 | * Use AT command: AT+DWELLT=0, set to Uplink Dwelltime=0. | ||
32 | * Use AT command: AT+DWELLT=1, set to Uplink Dwelltime=1. | ||
33 | |||
34 | Or via application downlink command: | ||
35 | |||
36 | * Downlink Payload: 0x2500, Set AT+DWELLT=0 to uplink. | ||
37 | * Downlink Payload: 0x2501, Set AT+DWELLT=1 to uplink. |