Wiki source code of Notes for LORIOT

Version 66.1 by Kilight Cao on 2022/08/31 12:00
Show last authors
1 (% class="wikigeneratedid" %)
2 **~ Table of Contents:**
3
4 {{toc/}}
5
6
7
8
9 = 1. Introduction =
10
11
12 (((
13 (((
14 The Dragino LoRaWAN gateway can communicate with [[LORIOT>>url:https://www.loriot.io/]] LoRaWAN Network Server:
15 )))
16 )))
17
18 (((
19 (((
20 Below list the support products and Requirements:
21 )))
22 )))
23
24 1. (((
25 (((
26 LoRaWAN Gateway model: [[LPS8>>url:http://www.dragino.com/products/lora-lorawan-gateway/item/148-lps8.html]], [[LG308>>url:http://www.dragino.com/products/lora-lorawan-gateway/item/140-lg308.html]], [[DLOS8>>url:http://www.dragino.com/products/lora-lorawan-gateway/item/160-dlos8.html]]
27 )))
28 )))
29 1. (((
30 (((
31 Firmware version since :[[LG02_LG08~~-~~-build-v5.4.1590459021-20200526-1012>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Release/]]
32
33
34 )))
35 )))
36
37 = 2. Gateway Registration for Semtech UDP =
38
39 == 2.1 Step 1: Get Gateway ETH0 MAC Address ==
40
41
42 Dragino LoRaWAN gateway uses ETH0 MAC address to generate Gateway ID to communicate with LORIOT, The user needs to find the ETH0 MAC in the "System -> System Overview" menu.
43
44
45 [[image:image-20220831110558-1.png||height="595" width="909"]]
46
47
48 == 2.2 Step 2: Register Gateway ==
49
50
51 [[image:image-20220831111032-2.png||height="617" width="1263"]]
52
53
54 **Choose gateway model**
55
56 [[image:image-20220831111132-3.png||height="596" width="1223"]]
57
58
59 (% style="color:red" %)**Special reminder: **If the user does not find the gateway Model, then **git ~-~-> Packet Forwarder Semtech**  can be selected
60
61 [[image:image-20220831115222-11.png||height="596" width="1221"]]
62
63
64 **Enter the ETH0 MAC of the gateway**
65
66 [[image:image-20220831111307-4.png||height="850" width="1237"]]
67
68
69 [[image:image-20220831111821-5.png||height="604" width="1239"]]
70
71
72 == 2.3 Step 3: Back to Semtech UDP page ==
73
74
75 Back to the page of Semtech UDP check the secondary server settings and click the button of (% style="color:blue" %)**Save&Apply.**
76
77 (% class="box infomessage" %)
78 (((
79 Server Address:  ~-~-> LORIOT Different servers use different addresses, Such as: **next.loriot.io**
80
81 Uplink /Downlink Port :  ~-~-> 1780
82 )))
83
84 [[image:image-20220831112553-7.png]]
85
86
87
88 == 2.4 Step 4: Check Connection ==
89
90
91 (((
92 LORIOT will show disconnect if Gateway doesn't connect
93 )))
94
95 (((
96 LORIOT will show connect if Gateway connect to LORIOT ok.
97 )))
98
99 [[image:image-20220831114125-8.png||height="561" width="1150"]]
100
101
102 == 2.5  Trouble Shooting ==
103
104
105 User can check the station log in the(% style="color:blue" %)** LogRead ~-~-> System Log **(%%)page.
106
107 [[image:image-20220831114647-9.png||height="706" width="894"]]
108
109
110 and recode the station log in the (% style="color:blue" %)** LogRead  ~-~->  Recode Log**(%%) page.
111
112 [[image:image-20220831114746-10.png||height="292" width="972"]]
113
114
115 = 3. Gateways are connected using LORIOT software =
116
117 == 3.1 Step 1: Get Gateway ETH0 MAC Address ==
118
119
120 (((
121 Dragino LoRaWAN gateway use ETH0 MAC address to generate Gateway ID to communicate with LORIOT, User can get the ETH0 MAC address from SSH access and run **ifconfig** command.
122
123
124 )))
125
126 [[image:image-20220524175559-2.png]]
127
128 Get ETH0 MAC address
129
130
131 (((
132 (% style="color:red" %)**Note**: **To make set up more friendly, the ETH0 will show on the LORIOT page in a new firmware version.**
133
134
135 )))
136
137 == 3.2 Step 2: Choose LORIOT service ==
138
139
140 [[image:image-20220531182035-1.png]]
141
142 Choose to use LORIOT as LoRaWAN service provider
143
144
145
146 [[image:image-20220531182109-2.png]]
147
148 Install and choose the LORIOT server to be used
149
150
151
152 == 3.3 Step 3: Checking Connection Status ==
153
154
155 [[image:image-20220531182202-3.png]]
156
157 Click to Home page and check the connection status
158
159
160
161 == 3.4 Step 4: Setup Account in LORIOT ==
162
163
164 Login [[LORIOT>>url:https://www.loriot.io/]] and create account
165
166 [[image:image-20220531182253-4.png]]
167
168 Log in LORIOT portal
169
170
171
172 Choose to use the server same as the gateway setting
173
174 [[image:image-20220526111312-1.png||height="493" width="1098"]]
175
176 Choose server
177
178
179
180 Create a New Network
181
182 [[image:image-20220526111425-2.png||height="579" width="1378"]]
183
184 Create a New Network
185
186
187 [[image:image-20220526111500-3.png]]
188
189 Create a New Network
190
191
192
193 == 3.5 Step 5: Register the gateway ==
194
195
196 [[image:image-20220526111650-4.png]]
197
198 Register the Gateway in LORIOT
199
200
201
202 Choose LG308 as gateway model
203
204 [[image:image-20220526111742-5.png||height="496" width="1372"]]
205
206 Choose LG308 as gateway model
207
208
209
210 Input Gateway ETH0 address
211
212 [[image:image-20220526111918-6.png||height="744" width="1336"]]
213
214 Choose SX1301 Reference and use SPI protocol
215
216
217
218 Choose the right Frequency Band and input location
219
220 [[image:image-20220526112029-7.png||height="620" width="1306"]]
221
222 Set up regional settings.
223
224
225
226 == 3.6 Step 6: Check Connection ==
227
228
229 (((
230 LORIOT will show disconnect if Gateway doesn't connect
231 )))
232
233 (((
234 LORIOT will show connect if Gateway connect to LORIOT ok.
235
236
237 )))
238
239 [[image:image-20220526112143-8.png||height="654" width="1373"]]
240
241 Status: Connected
242
243
244
245 == 3.7 Debug If there is connection issue ==
246
247
248 User can check if loriot is running by checking the web ui
249
250
251 [[image:image-20220526112917-18.png]]
252
253 Status: Connected
254
255
256 (((
257 If user want to see more log, he can run below commands in Linux and see the full log:
258 )))
259
260 (% class="box" %)
261 (((
262 (((
263 ps | grep "loriot_dragino" | grep -v grep | awk '{print $1}' | xargs kill -s 9
264 /usr/bin/loriot_dragino_lg308_spi -f -s eu1.loriot.io
265 )))
266 )))
267
268 (((
269
270
271 Above two commands will first kill the loriot process and run it again to get more output.
272 )))
273
274 [[image:image-20220530145011-1.png]]
275
276 Get more debug info
277
278
279
280 = 4. End Device Note =
281
282 == 4.1 Downlink Setup ==
283
284
285 [[image:image-20220530145133-2.png]]
286
287
288 [[image:image-20220526112416-11.png]]
289
290
291 [[image:image-20220526112459-12.png]]
292
293
294 [[image:image-20220526112537-13.png]]
295
296
297 [[image:image-20220526112608-14.png||height="610" width="1382"]]
298
299
300 [[image:image-20220526112655-15.png]]
301
302
303 [[image:image-20220526112719-16.png]]
304
305
306 [[image:image-20220526112759-17.png||height="483" width="1386"]]

Applications

Navigation

Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0