Wiki source code of Notes for LORIOT

Version 65.1 by Kilight Cao on 2022/08/31 11:55
Show last authors
1 (% class="wikigeneratedid" %)
2 **~ Table of Contents:**
3
4 {{toc/}}
5
6
7
8
9 = 1. Introduction =
10
11
12 (((
13 (((
14 The Dragino LoRaWAN gateway can communicate with [[LORIOT>>url:https://www.loriot.io/]] LoRaWAN Network Server:
15 )))
16 )))
17
18 (((
19 (((
20 Below list the support products and Requirements:
21 )))
22 )))
23
24 1. (((
25 (((
26 LoRaWAN Gateway model: [[LPS8>>url:http://www.dragino.com/products/lora-lorawan-gateway/item/148-lps8.html]], [[LG308>>url:http://www.dragino.com/products/lora-lorawan-gateway/item/140-lg308.html]], [[DLOS8>>url:http://www.dragino.com/products/lora-lorawan-gateway/item/160-dlos8.html]]
27 )))
28 )))
29 1. (((
30 (((
31 Firmware version since :[[LG02_LG08~~-~~-build-v5.4.1590459021-20200526-1012>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Release/]]
32
33
34 )))
35 )))
36
37 = 2. Gateway Registration for Semtech UDP =
38
39 == 2.1 Step 1: Get Gateway ETH0 MAC Address ==
40
41
42 Dragino LoRaWAN gateway uses ETH0 MAC address to generate Gateway ID to communicate with LORIOT, The user needs to find the ETH0 MAC in the "System -> System Overview" menu.
43
44
45 [[image:image-20220831110558-1.png||height="595" width="909"]]
46
47
48 == 2.2 Step 2: Register Gateway ==
49
50
51 [[image:image-20220831111032-2.png||height="617" width="1263"]]
52
53
54 **Choose gateway model**
55
56 [[image:image-20220831111132-3.png||height="596" width="1223"]]
57
58
59 (% style="color:red" %)**Special reminder: **If the user does not find the gateway Model, then **git ~-~-> Packet Forwarder Semtech**  can be selected
60
61 [[image:image-20220831115222-11.png||height="596" width="1221"]]
62
63
64 **Enter the ETH0 MAC of the gateway**
65
66 [[image:image-20220831111307-4.png||height="850" width="1237"]]
67
68
69 [[image:image-20220831111821-5.png||height="604" width="1239"]]
70
71
72 == 2.3 Step 3: Back to Semtech UDP page ==
73
74
75 Back to the page of Semtech UDP check the secondary server settings and click the button of (% style="color:blue" %)**Save&Apply.**
76
77 (% class="box infomessage" %)
78 (((
79 Server Address:  ~-~-> LORIOT Different servers use different addresses, Such as: **next.loriot.io**
80
81 Uplink /Downlink Port :  ~-~-> 1780
82 )))
83
84 [[image:image-20220831112553-7.png]]
85
86
87
88 == 2.4 Step 4: Check Connection ==
89
90
91 (((
92 LORIOT will show disconnect if Gateway doesn't connect
93 )))
94
95 (((
96 LORIOT will show connect if Gateway connect to LORIOT ok.
97 )))
98
99 [[image:image-20220831114125-8.png||height="561" width="1150"]]
100
101
102 == 2.5  Trouble Shooting ==
103
104
105 User can check the station log in the(% style="color:blue" %)** LogRead ~-~-> System Log **(%%)page.
106
107 [[image:image-20220831114647-9.png||height="706" width="894"]]
108
109
110 and recode the station log in the (% style="color:blue" %)** LogRead  ~-~->  Recode Log**(%%) page.
111
112 [[image:image-20220831114746-10.png||height="292" width="972"]]
113
114 = 3. Gateway Setup Instruction =
115
116 == 3.1 Step 1: Get Gateway ETH0 MAC Address ==
117
118
119 (((
120 Dragino LoRaWAN gateway use ETH0 MAC address to generate Gateway ID to communicate with LORIOT, User can get the ETH0 MAC address from SSH access and run **ifconfig** command.
121
122
123 )))
124
125 [[image:image-20220524175559-2.png]]
126
127 Get ETH0 MAC address
128
129
130 (((
131 (% style="color:red" %)**Note**: **To make set up more friendly, the ETH0 will show on the LORIOT page in a new firmware version.**
132
133
134 )))
135
136 == 3.2 Step 2: Choose LORIOT service ==
137
138
139 [[image:image-20220531182035-1.png]]
140
141 Choose to use LORIOT as LoRaWAN service provider
142
143
144
145 [[image:image-20220531182109-2.png]]
146
147 Install and choose the LORIOT server to be used
148
149
150
151 == 3.3 Step 3: Checking Connection Status ==
152
153
154 [[image:image-20220531182202-3.png]]
155
156 Click to Home page and check the connection status
157
158
159
160 == 3.4 Step 4: Setup Account in LORIOT ==
161
162
163 Login [[LORIOT>>url:https://www.loriot.io/]] and create account
164
165 [[image:image-20220531182253-4.png]]
166
167 Log in LORIOT portal
168
169
170
171 Choose to use the server same as the gateway setting
172
173 [[image:image-20220526111312-1.png||height="493" width="1098"]]
174
175 Choose server
176
177
178
179 Create a New Network
180
181 [[image:image-20220526111425-2.png||height="579" width="1378"]]
182
183 Create a New Network
184
185
186 [[image:image-20220526111500-3.png]]
187
188 Create a New Network
189
190
191
192 == 3.5 Step 5: Register the gateway ==
193
194
195 [[image:image-20220526111650-4.png]]
196
197 Register the Gateway in LORIOT
198
199
200
201 Choose LG308 as gateway model
202
203 [[image:image-20220526111742-5.png||height="496" width="1372"]]
204
205 Choose LG308 as gateway model
206
207
208
209 Input Gateway ETH0 address
210
211 [[image:image-20220526111918-6.png||height="744" width="1336"]]
212
213 Choose SX1301 Reference and use SPI protocol
214
215
216
217 Choose the right Frequency Band and input location
218
219 [[image:image-20220526112029-7.png||height="620" width="1306"]]
220
221 Set up regional settings.
222
223
224
225 == 3.6 Step 6: Check Connection ==
226
227
228 (((
229 LORIOT will show disconnect if Gateway doesn't connect
230 )))
231
232 (((
233 LORIOT will show connect if Gateway connect to LORIOT ok.
234
235
236 )))
237
238 [[image:image-20220526112143-8.png||height="654" width="1373"]]
239
240 Status: Connected
241
242
243
244 == 3.7 Debug If there is connection issue ==
245
246
247 User can check if loriot is running by checking the web ui
248
249
250 [[image:image-20220526112917-18.png]]
251
252 Status: Connected
253
254
255 (((
256 If user want to see more log, he can run below commands in Linux and see the full log:
257 )))
258
259 (% class="box" %)
260 (((
261 (((
262 ps | grep "loriot_dragino" | grep -v grep | awk '{print $1}' | xargs kill -s 9
263 /usr/bin/loriot_dragino_lg308_spi -f -s eu1.loriot.io
264 )))
265 )))
266
267 (((
268
269
270 Above two commands will first kill the loriot process and run it again to get more output.
271 )))
272
273 [[image:image-20220530145011-1.png]]
274
275 Get more debug info
276
277
278
279 = 4. End Device Note =
280
281 == 4.1 Downlink Setup ==
282
283
284 [[image:image-20220530145133-2.png]]
285
286
287 [[image:image-20220526112416-11.png]]
288
289
290 [[image:image-20220526112459-12.png]]
291
292
293 [[image:image-20220526112537-13.png]]
294
295
296 [[image:image-20220526112608-14.png||height="610" width="1382"]]
297
298
299 [[image:image-20220526112655-15.png]]
300
301
302 [[image:image-20220526112719-16.png]]
303
304
305 [[image:image-20220526112759-17.png||height="483" width="1386"]]

Applications

Navigation

Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0