Wiki source code of Lorawan-server by Petr Gotthard
Version 42.1 by Kilight Cao on 2022/06/01 20:35
Show last authors
| author | version | line-number | content |
|---|---|---|---|
| 1 | **~ Contents:** | ||
| 2 | |||
| 3 | {{toc/}} | ||
| 4 | |||
| 5 | |||
| 6 | |||
| 7 | |||
| 8 | |||
| 9 | = 1. Introduction = | ||
| 10 | |||
| 11 | This is an Open Source LoRaWAN server from [[https:~~/~~/github.com/gotthardp/lorawan-server>>url:https://github.com/gotthardp/lorawan-server]]. | ||
| 12 | |||
| 13 | |||
| 14 | = 2. Support Devices = | ||
| 15 | |||
| 16 | All current LoRaWAN gateway can support the connection to this LoRaWAN server. Some gateway models have this lorawan server built-in by default. They are: | ||
| 17 | |||
| 18 | * HP0A | ||
| 19 | * HP0C | ||
| 20 | * LPS8v2 | ||
| 21 | |||
| 22 | If for some reason, if the above model doesn't have this lorawan server in it. Users can install them manually. | ||
| 23 | |||
| 24 | |||
| 25 | == 2.1 Install lorawan server in Armbian System: == | ||
| 26 | |||
| 27 | === Check if you have the Armbian system. === | ||
| 28 | |||
| 29 | Run command: | ||
| 30 | |||
| 31 | (% class="box infomessage" %) | ||
| 32 | ((( | ||
| 33 | uname -a | ||
| 34 | cat /etc/debian_version | ||
| 35 | ))) | ||
| 36 | |||
| 37 | [[image:image-20220526172628-2.png]] | ||
| 38 | |||
| 39 | === Install lorawan server === | ||
| 40 | |||
| 41 | Run command: | ||
| 42 | |||
| 43 | (% class="box infomessage" %) | ||
| 44 | ((( | ||
| 45 | wget https://github.com/gotthardp/lorawan-server/releases/download/v0.6.7/lorawan-server_0.6.7_all.deb | ||
| 46 | dpkg -i lorawan-server_0.6.7_all.deb | ||
| 47 | ))) | ||
| 48 | |||
| 49 | [[image:image-20220527085338-1.png||height="271" width="1145"]] | ||
| 50 | |||
| 51 | At this point, lorawan-server is installed | ||
| 52 | |||
| 53 | |||
| 54 | == 2.2 How do start lorawan server == | ||
| 55 | |||
| 56 | === Setting the automatic startup and start/stop lorawan-server via systemctl === | ||
| 57 | |||
| 58 | If users want the server to start automatically after system reboot, run the command: | ||
| 59 | |||
| 60 | (% class="box infomessage" %) | ||
| 61 | ((( | ||
| 62 | systemctl enable lorawan-server | ||
| 63 | ))) | ||
| 64 | |||
| 65 | start/stop lorawan-server via systemctl: | ||
| 66 | |||
| 67 | (% class="box infomessage" %) | ||
| 68 | ((( | ||
| 69 | systemctl start lorawan-server | ||
| 70 | systemctl stop lorawan-server | ||
| 71 | ))) | ||
| 72 | |||
| 73 | [[image:image-20220527091541-2.png||height="81" width="896"]] | ||
| 74 | |||
| 75 | By default, the server listens on HTTP port 8080 and expects "admin" as both username and password. Users can access it via a web browser by entering the URL, where is the IP or the hostname of your server. [[http:~~/~~/ip_address:8080>>http://ip_address:8080]] | ||
| 76 | |||
| 77 | |||
| 78 | = 3. Configure Gateway = | ||
| 79 | |||
| 80 | == 3.1 Register Gateway == | ||
| 81 | |||
| 82 | [[image:image-20220531144134-1.png||height="623" width="965"]] | ||
| 83 | |||
| 84 | |||
| 85 | Back to the page of Semtech UDP check the secondary server settings and click the button of **Save&Apply** | ||
| 86 | |||
| 87 | |||
| 88 | |||
| 89 | [[image:image-20220531144640-2.png]] | ||
| 90 | |||
| 91 | |||
| 92 | If the user completes the above steps, you can check your gateway status on the built-in Lorawan server. | ||
| 93 | |||
| 94 | |||
| 95 | [[image:image-20220531144914-3.png||height="657" width="964"]] | ||
| 96 | |||
| 97 | |||
| 98 | [[image:image-20220531144957-4.png||height="425" width="970"]] | ||
| 99 | |||
| 100 | = 4. Configure Sensors = | ||
| 101 | |||
| 102 | == Step 1. Add the Networks == | ||
| 103 | |||
| 104 | **The following are examples of adding EU868 frequency nodes** | ||
| 105 | |||
| 106 | See this link for more frequency configurations [[https:~~/~~/github.com/gotthardp/lorawan-server/blob/master/doc/Regions.md>>https://github.com/gotthardp/lorawan-server/blob/master/doc/Regions.md]] | ||
| 107 | |||
| 108 | (% class="box" %) | ||
| 109 | ((( | ||
| 110 | 1.Input the NetID* ~-~-> Random 6 digits | ||
| 111 | |||
| 112 | 2.Choose the Region* ~-~-> EU 863-870MHz | ||
| 113 | |||
| 114 | 3.Gateway Power ~-~-> Default value of EU868 is 16dBm | ||
| 115 | ))) | ||
| 116 | |||
| 117 | [[image:image-20220601184816-1.png||height="608" width="958"]] | ||
| 118 | |||
| 119 | **Configuration of ADR** | ||
| 120 | |||
| 121 | (% class="box" %) | ||
| 122 | ((( | ||
| 123 | Max EIRP(dBm) * ~-~-> 16 | ||
| 124 | |||
| 125 | Max Power * ~-~-> Max | ||
| 126 | |||
| 127 | Min Power * ~-~-> Max - 14 dB | ||
| 128 | |||
| 129 | Max Date Rate * ~-~-> SF7 125kHz (5470 bit/s) | ||
| 130 | |||
| 131 | Initial RX2 DR * ~-~-> SF12 125kHz (250 bit/s) | ||
| 132 | |||
| 133 | Initial Duty Cycle ~-~-> 1 (100%) | ||
| 134 | |||
| 135 | Initial RX1 DR Offset ~-~-> 0 | ||
| 136 | |||
| 137 | Initial RX2 Freq (MHz)* ~-~-> 869.525 | ||
| 138 | ))) | ||
| 139 | |||
| 140 | [[image:image-20220601185451-2.png||height="612" width="953"]] | ||
| 141 | |||
| 142 | **Configuration of Channels** | ||
| 143 | |||
| 144 | (% class="box" %) | ||
| 145 | ((( | ||
| 146 | Initial Channels ~-~-> eg. 0 - 2 | ||
| 147 | ))) | ||
| 148 | |||
| 149 | [[image:image-20220601190313-3.png||height="549" width="958"]] | ||
| 150 | |||
| 151 | Finally, click "submit", Complete the Add Networks step. | ||
| 152 | |||
| 153 | == Step 2. Create new group == | ||
| 154 | |||
| 155 | (% class="box" %) | ||
| 156 | ((( | ||
| 157 | Name ~-~-> custom | ||
| 158 | |||
| 159 | Network ~-~-> Enter the Networks configured in the preceding steps | ||
| 160 | ))) | ||
| 161 | |||
| 162 | [[image:image-20220601200220-4.png||height="533" width="968"]] | ||
| 163 | |||
| 164 | |||
| 165 | Step 3. Create new group |