Wiki source code of How to set the transmit time interval
Version 4.1 by Edwin Chen on 2022/05/12 11:15
Hide last authors
| author | version | line-number | content |
|---|---|---|---|
 |
1.2 | 1 | |
| |
1.1 | 2 | |
| |
1.2 | 3 | = 1. Introduction = |
| |
1.1 | 4 | |
 |
4.1 | 5 | This chapter describes how to set Transmit Time Interva[[l for Dragino Senso>>https://End Device AT Commands and Downlink Command/#H4.1ChangeUplinkInterval]]rs. |
| |
1.1 | 6 | |
| |
4.1 | 7 | = 2. via AT Command through UART interface = |
| |
1.1 | 8 | |
| |
4.1 | 9 | |
| 10 | |||
| 11 | (% class="wikigeneratedid" %) | ||
| 12 | = 3. via LoRaWAN Downlink = | ||
| 13 | |||
| |
1.2 | 14 | TDC can be controlled by Downlink Payload. |
| |
1.1 | 15 | |
| |
2.2 | 16 | ((( |
| |
1.2 | 17 | For example: AT+TDC=0x258=600s Payload: 01 00 02 58 TDC=600s The time interval is represented by hexadecimal conversion to decimal. |
| |
2.2 | 18 | ))) |
| |
1.1 | 19 | |
| |
1.2 | 20 | [[image:https://wiki.dragino.com/images/8/8e/TDC.png||alt="TDC.png" height="173" width="850"]] |
| |
1.1 | 21 | |
| |
2.2 | 22 | ((( |
| 23 | |||
| 24 | ))) | ||
| |
1.1 | 25 | |
| |
2.2 | 26 | ((( |
| |
2.1 | 27 | If the payload=0100003C, it means set the END Node’s TDC to 0x00003C=60(S), 3C (HEX) = 60 (decimal)，while type code is 01. |
| |
2.2 | 28 | ))) |
| |
2.1 | 29 | |
| |
2.2 | 30 | ((( |
| |
1.2 | 31 | Payload: 01 00 00 1E TDC=30s Payload: 01 00 00 3C TDC=60s |
| |
2.2 | 32 | ))) |
| |
1.1 | 33 | |
| |
3.2 | 34 | [[image:image-20220512084801-1.png]] |
| |
1.1 | 35 | |
| |
1.2 | 36 | = 3. Downlink Method = |
| |
1.1 | 37 | |
| |
2.1 | 38 | See use note for different serves [[Servers Note>>http://8.211.40.43:8080/xwiki/bin/view/Main/]] |