Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -2,29 +2,18 @@
2	2
3	3	= 1. Introduction =
4	4
5		-This chapter describes how to set Transmit Time Interval for [[label>>End Device AT Commands and Downlink Command/||anchor="#H4.1ChangeUplinkInterval"]].
	5	+This chapter describes how to set Transmit Time Interval for [[Dragino Sensors>>Dragino Sensors]].
6	6
7	7	= 2. via AT Command through UART interface =
8	8
9	9
10		-|=(% colspan="3" %)AT+TDC
11		-|**Command Example**|**Function**|**Response**
12		-|AT+TDC=?|Show current transmit Interval|30000(((
13		-OK
14	14
15		-the interval is 30000ms = 30s
16		-)))
17		-|AT+TDC=60000|Set Transmit Interval|OK(((
18		-Set transmit interval to 60000ms = 60 seconds
19		-)))
20		-
21		-
22	22	= 3. via LoRaWAN Downlink =
23	23
24	24	TDC can be controlled by Downlink Payload.
25	25
26	26	(((
27		-For example: Payload: 01 00 02 58 TDC=600s The time interval is represented by hexadecimal conversion to decimal.
	16	+For example: AT+TDC=0x258=600s Payload: 01 00 02 58 TDC=600s The time interval is represented by hexadecimal conversion to decimal.
28	28	)))
29	29
30	30	[[image:https://wiki.dragino.com/images/8/8e/TDC.png||alt="TDC.png" height="173" width="850"]]
...	...	@@ -43,6 +43,6 @@
43	43
44	44	[[image:image-20220512084801-1.png]]
45	45
46		-== Downlink Method ==
	35	+= 3. Downlink Method =
47	47
48	48	See use note for different serves [[Servers Note>>http://8.211.40.43:8080/xwiki/bin/view/Main/]]