Wiki source code of What port should i open in router to allow Gateway for IoT Connection?
Last modified by Xiaoye on 2023/06/21 11:49
Hide last authors
| author | version | line-number | content |
|---|---|---|---|
 |
3.1 | 1 | = 1. Ports use for UDP Packet Forwarder = |
| |
2.1 | 2 | |
| |
3.1 | 3 | This depends on the transfer port of the server you are connected to. |
| |
2.1 | 4 | |
| |
4.1 | 5 | Usually UDP port 1700 |
| |
2.1 | 6 | |
| 7 | |||
| |
3.1 | 8 | = 2. Ports used for Base Station Connection = |
| |
2.1 | 9 | |
| |
3.1 | 10 | This depends on the transfer port of the server you are connected to. |
| |
2.1 | 11 | |
| |
4.1 | 12 | Usually TCP port 443 |
| |
3.1 | 13 | |
| 14 | |||
| 15 | = 3. Ports used for LoRaWAN MQTT Bridge Connection = | ||
| 16 | |||
| 17 | This depends on the transfer port of the server you are connected to. | ||
| 18 | |||
| |
4.1 | 19 | Usually TCP port 1883/8883 |
| |
3.1 | 20 | |
| 21 | |||
| |
4.1 | 22 | = 4. Fire wall to keep internet detection. = |
| |
3.1 | 23 | |
| 24 | The gateway will send data via 1.1.1.1/8.8.8.8 to detect if the internet is active | ||
| 25 | |||
| |
5.1 | 26 | Which need the firewall allows ICMP data to pass through. |
| |
3.1 | 27 | |
| |
4.1 | 28 | |
| |
3.1 | 29 |