DS03A-NB -- NB-IoT Door Sensor User Manual

The Dragino DS03A-NB is a (% style="color:blue" %) **NB-IoT Door Sensor**(%%) for Internet of Things solution. It (% style="color:blue" %)**detects door open/close status**(%%) and uplinks to IoT server via NB-IoT network. user can see the door status, open duration, open counts in the IoT Server.

22

23

The DS03A-NB will send periodically data every 2 hours as well as for each door open/close action. It also counts the door open times and calculates the last door open duration. Users can also disable the uplink for each open/close event, instead, DS03A-NB can count each open event and uplink periodically.

24

25

DS03A-NB supports (% style="color:blue" %)**Datalog Feature,** (%%)it can save the data when there is no NB-IoT network and uplink when network recover.

26

27

DS03A-NB has the (% style="color:blue" %)**Open Alarm Feature**,(%%) user can set this feature so the device will send an alarm if the door has been open for a certain time.

28

29

DS03A-NB is designed for outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures

30

31

DS03A-NB supports different uplink methods including (% style="color:blue" %)**MQTT, MQTTs, UDP & TCP**(%%) for different application requirement, and support uplinks to various IoT Servers.

32

33

DS03A-NB (% style="color:blue" %)**supports BLE configure **(%%)and(% style="color:blue" %)** OTA update**(%%) which make user easy to use.

34

35

DS03A-NB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long-term use up to several years.

36

37

DS03A-NB has optional built-in SIM card and default IoT server connection version. Which makes it works with simple configuration.

38

39

[[image:image-20231011093807-6.png||height="278" width="879"]]

== 1.2 Features ==

* NB-IoT Bands: B1/B2/B3/B4/B5/B8/B12/B13/B17/B18/B19/B20/B25/B28/B66/B70/B85 @H-FDD

46

* Ultra-low power consumption

47

* Door Open/Close detect

48

* Door open/close statistics

49

* Datalog Feature

50

* Open Alarm Feature

51

* Multiply Sampling and one uplink

52

* Support Bluetooth v5.1 remote configure and update firmware

53

* Uplink on periodically

54

* Downlink to change configure

55

* 8500mAh Battery for long term use

56

* Nano SIM card slot for NB-IoT SIM

57

(% style="display:none" %) (%%)

58

59

== 1.3 Specification ==

60

61

62

(% style="color:blue" %)**Common DC Characteristics:**

63

64

* Supply Voltage: 2.5v ~~ 3.6v

65

* Operating Temperature: -40 ~~ 85°C

66

67

(% style="color:blue" %)**NB-IoT Spec:**

68

69

(% style="color:#037691" %)**NB-IoT Module: BC660K-GL**

70

71

(% style="color:#037691" %)**Support Bands:**

* B1 @H-FDD: 2100MHz

* B2 @H-FDD: 1900MHz

* B3 @H-FDD: 1800MHz

* B4 @H-FDD: 2100MHz

* B5 @H-FDD: 860MHz

* B8 @H-FDD: 900MHz

* B12 @H-FDD: 720MHz

* B13 @H-FDD: 740MHz

* B17 @H-FDD: 730MHz

* B18 @H-FDD: 870MHz

* B19 @H-FDD: 870MHz

* B20 @H-FDD: 790MHz

* B25 @H-FDD: 1900MHz

86

* B28 @H-FDD: 750MHz

87

* B66 @H-FDD: 2000MHz

88

* B70 @H-FDD: 2000MHz

89

* B85 @H-FDD: 700MHz

90

91

(% style="color:blue" %)**Battery:**

92

93

* Li/SOCI2 un-chargeable battery

94

* Capacity: 8500mAh

95

* Self Discharge: <1% / Year @ 25°C

96

* Max continuously current: 130mA

97

* Max boost current: 2A, 1 second

98

99

(% style="color:blue" %)**Power Consumption**

100

101

* STOP Mode: 10uA @ 3.3v

102

* Max transmit power: 350mA@3.3v

103

(% style="display:none" %) (%%)

104

105

== 1.4 Applications ==

106

107

108

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654741400370-813.png?rev=1.1||alt="1654741400370-813.png"]]

109

110

111

== 1.5 Sleep mode and working mode ==

112

113

114

(% style="color:blue" %)**Deep Sleep Mode: **(%%)Sensor doesn't have any NB-IoT activate. This mode is used for storage and shipping to save battery life.

115

116

(% style="color:blue" %)**Working Mode:** (%%)In this mode, Sensor will work as NB-IoT Sensor to Join NB-IoT network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.

117

118

119

== 1.6 Button & LEDs ==

120

121

122

[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675071855856-879.png]]

123

124

125

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)

126

|=(% style="width: 167px;background-color:#4F81BD;color:white" %)**Behavior on ACT**|=(% style="width: 117px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width:225px;background-color:#4F81BD;color:white" %)**Action**

127

|(% style="width:167px" %)Pressing ACT between 1s < time < 3s|(% style="width:117px" %)Send an uplink|(% style="width:225px" %)(((

128

If sensor has already attached to NB-IoT network, sensor will send an uplink packet, (% style="color:blue" %)**blue led** (%%)will blink once.

129

Meanwhile, BLE module will be active and user can connect via BLE to configure device.

130

)))

131

|(% style="width:167px" %)Pressing ACT for more than 3s|(% style="width:117px" %)Active Device|(% style="width:225px" %)(((

132

(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:#037691" %)**OTA mode**(%%) for 3 seconds. And then start to attach NB-IoT network.

133

(% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.

134

Once sensor is active, BLE module will be active and user can connect via BLE to configure device, no matter if device attach NB-IoT network or not.

135

)))

136

|(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means device is in Deep Sleep Mode.

137

138

(% style="color:red" %)**Note: When the device is executing a program, the buttons may become invalid. It is best to press the buttons after the device has completed the program execution.**

139

140

141

== 1.7 BLE connection ==

142

143

144

DS03A-NB support BLE remote configure and firmware update.

145

146

147

BLE can be used to configure the parameter of sensor or see the console output from sensor. BLE will be only activate on below case:

148

149

* Press button to send an uplink

150

* Press button to active device.

151

* Device Power on or reset.

152

153

If there is no activity connection on BLE in 60 seconds, sensor will shut down BLE module to enter low power mode.

154

155

156

== 1.8 Pin Definitions & Switch ==

157

158

159

[[image:image-20230819104805-5.png]]

160

161

162

=== 1.8.1 Jumper JP2 ===

163

164

165

Power on Device when put this jumper.

166

167

168

=== 1.8.2 BOOT MODE / SW1 ===

169

170

171

**1)** (% style="color:blue" %)**ISP**(%%): upgrade mode, device won't have any signal in this mode. but ready for upgrade firmware. LED won't work. Firmware won't run.

172

173

**2)** (% style="color:blue" %)**Flash**(%%): work mode, device starts to work and send out console output for further debug

174

175

176

=== 1.8.3 Reset Button ===

177

178

179

Press to reboot the device.

180

181

(% style="display:none" %)

== 1.9 Mechanical ==

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual/WebHome/1675143884058-338.png?rev=1.1||alt="1675143884058-338.png"]]

187

188

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual/WebHome/1675143899218-599.png?rev=1.1||alt="1675143899218-599.png"]]

189

190

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual/WebHome/1675143909447-639.png?rev=1.1||alt="1675143909447-639.png"]]

**Probe Mechanical:**

195

196

197

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654741444887-479.png?width=513&height=399&rev=1.1||alt="1654741444887-479.png"]]

== 1.10 Magnet Distance ==

202

203

204

* Wood Door: 10mm ~~ 30mm

205

* Iron Door: 30 ~~ 45mm

206

(% style="display:none" %) (%%)

207

208

= 2. Use DS03A-NB to communicate with IoT Server =

209

210

== 2.1 Send data to IoT server via NB-IoT network ==

211

212

213

The DS03A-NB is equipped with a NB-IoT module, the pre-loaded firmware in DS03A-NB will get environment data from sensors and send the value to local NB-IoT network via the NB-IoT module. The NB-IoT network will forward this value to IoT server via the protocol defined by DS03A-NB.

214

215

216

Below shows the network structure:

217

218

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/DS03A-NB_NB-IoT_Door_Sensor_User_Manual/WebHome/image-20231011093807-6.png?width=879&height=278&rev=1.1||alt="image-20231011093807-6.png"]]

219

220

221

There are two version: (% style="color:blue" %)**-GE**(%%) and (% style="color:blue" %)**-1D**(%%) version of DS03A-NB.

222

223

224

(% style="color:blue" %)**GE Version**(%%): This version doesn't include SIM card or point to any IoT server. User needs to use AT Commands to configure below two steps to set DS03A-NB send data to IoT server.

225

226

* Install NB-IoT SIM card and configure APN. See instruction of [[Attach Network>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H2.AttachNetwork]].

227

228

* Set up sensor to point to IoT Server. See instruction of [[Configure to Connect Different Servers>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.Configuretoconnecttodifferentservers]].

229

230

Below shows result of different server as a glance.

231

232

(% border="1" cellspacing="4" style="width:515px" %)

233

|(% style="background-color:#4f81bd; color:white; width:100px" %)**Servers**|(% style="background-color:#4f81bd; color:white; width:300px" %)**Dash Board**|(% style="background-color:#4f81bd; color:white; width:115px" %)**Comments**

234

|(% style="width:127px" %)[[Node-Red>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.5A0Node-RedA028viaA0MQTT29]]|(% style="width:385px" %)(((

235

(% style="text-align:center" %)

236

[[image:image-20230819113244-8.png||height="183" width="367"]]

237

)))|(% style="width:170px" %)

238

|(% style="width:127px" %)[[DataCake>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.4Datacake]]|(% style="width:385px" %)(((

239

(% style="text-align:center" %)

240

[[image:image-20230819113244-9.png||height="119" width="367"]]

241

)))|(% style="width:170px" %)

242

|(% style="width:127px" %)[[Tago.IO>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.7A0Tago.ioA028viaA0MQTT29]]|(% style="width:385px" %) |(% style="width:170px" %)

243

|(% style="width:127px" %)[[General UDP>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.1GeneralA0UDPA0Connection]]|(% style="width:385px" %)Raw Payload. Need Developer to design Dash Board|(% style="width:170px" %)

244

|(% style="width:127px" %)[[General MQTT>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.2GeneralA0MQTTA0Connection]]|(% style="width:385px" %)Raw Payload. Need Developer to design Dash Board|(% style="width:170px" %)

245

|(% style="width:127px" %)[[ThingSpeak>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.3A0ThingSpeakA028viaA0MQTT29]]|(% style="width:385px" %)(((

246

(% style="text-align:center" %)

247

[[image:image-20230819113244-10.png||height="104" width="367"]]

248

)))|(% style="width:170px" %)

249

|(% style="width:127px" %)[[ThingsBoard>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.6A0ThingsBoard.CloudA028viaA0MQTT29]]|(% style="width:385px" %)(((

250

(% style="text-align:center" %)

251

[[image:image-20230819113244-11.png||height="141" width="367"]]

252

)))|(% style="width:170px" %)

253

254

(% style="color:blue" %)**1D Version**(%%): This version has 1NCE SIM card pre-installed and configure to send value to DataCake. User Just need to select the sensor type in DataCake and Activate DS03A-NB and user will be able to see data in DataCake. See here for [[DataCake Config Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.4Datacake]].

255

256

257

== 2.2 Payload Types ==

258

259

260

To meet different server requirement, DS03A-NB supports different payload type.

**Includes:**

* [[General JSON format payload>>||anchor="H2.2.1GeneralJsonFormat28Type3D529"]]. (Type=5)

265

266

* [[HEX format Payload>>||anchor="H2.2.2HEXformatPayload28Type3D029"]]. (Type=0)

267

268

* [[ThingSpeak Format>>||anchor="H2.2.4ThingSpeakPayload28Type3D129"]]. (Type=1)

269

270

* [[ThingsBoard Format>>||anchor="H2.2.3ThingsBoardPayload28Type3D329"]]. (Type=3)

271

272

User can specify the payload type when choose the connection protocol. Example:

273

274

(% style="color:#037691" %)**AT+PRO=2,0** (%%) ~/~/ Use UDP Connection & hex Payload

275

276

(% style="color:#037691" %)**AT+PRO=2,5** (%%) ~/~/ Use UDP Connection & Json Payload

277

278

(% style="color:#037691" %)**AT+PRO=3,5 ** (%%) ~/~/ Use MQTT Connection & Json Payload

279

280

281

=== 2.2.1 General Json Format(Type~=5) ===

282

283

284

This is the General Json Format. As below:

285

286

(% style="color:#4472c4" %)**{"IMEI":"866207052559857","Model":"DS03A-NB","level status":1,"alarm status":0,"door open num":0,"last open time":0,"level status2":1,"alarm status2":0,"door open num2":0,"last open time2":0,"battery":3.48,"signal":24,"1":{1,0,0,2023/11/13 09:59:01},"2":{0,0,261,2023/11/13 03:20:00},"3":{237,9896971,263,2023/11/13 03:05:00},"4":{0,29,263,2023/11/13 02:20:12},"5":{215,9897015,268,2023/11/13 01:58:16},"6":{0,79,261,2023/11/13 01:43:16},"7":{227,9896991,5368540,2023/11/13 01:18:46},"8":{0,19,5367640,2023/11/11 08:53:57}}**

287

288

289

[[image:image-20231113180055-1.png]]

290

291

292

(% style="color:red" %)**Notice, from above payload:**

293

294

* Distance , Battery & Signal are the value at uplink time.

295

296

* Json entry 1 ~~ 8 are the last 1 ~~ 8 sampling data as specify by (% style="color:#037691" %)**AT+NOUD=8 ** (%%)Command. Each entry includes (from left to right): Water Flow, Sampling time.

297

(% style="display:none" %) (%%)

298

299

=== 2.2.2 HEX format Payload(Type~=0) ===

300

301

302

This is the HEX Format. HEX format Payload Single-channel and double-channel payload have different byte lengths.w

303

304

305

**The HEX format payload for the single-channel mode is as follows:**

306

307

(% style="color:#4472c4" %)**f86620705255985712640d9c180101000000000000006551f424010000000000006551f36500000000000105655195e0ed97040b0001076551925c0000001d000107655187dcd797043700010c655182b80000004f00010565517f34e397041f51eadc655179760000001351e758654f4125**

308

309

[[image:image-20231114091247-2.png||height="186" width="1363"]]

310

311

312

If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the NB sensor uplink data.

313

314

[[image:image-20231114094432-3.png]]

**The HEX format payload for the double-channel mode is as follows:**

319

320

(% style="color:#4472c4" %)**f86620705255985712640db71701010000000000000001000000000000006552d13401000000000000000000000000006551f365000000000001050000005f00005f655195e0ed97040b0001070000005c00005c6551925c0000001d00010700000033000033655187dcd797043700010c00000033000033655182b80000004f0001050000003300003365517f34e397041f51eadc00000000000000655179760000001351e75800000000000000654f4125**

321

322

[[image:image-20231114091229-1.png||height="180" width="1584"]]

323

324

325

If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the NB sensor uplink data.

326

327

[[image:image-20231114094838-5.png]]

328

329

330

(% style="color:blue" %)**Version:**

331

332

These bytes include the hardware and software version.

333

334

(% style="color:#037691" %)**Higher byte:**(%%) Specify Sensor Model: 0x12 for DS03A-NB

335

336

(% style="color:#037691" %)**Lower byte:**(%%) Specify the software version: 0x64=100, means firmware version 1.0.0

337

338

339

(% style="color:blue" %)**BAT (Battery Info):**

Ex1: 0x0dda = 3546mV

(% style="color:blue" %)**Signal Strength:**

345

346

NB-IoT Network signal Strength.

**Ex1: 0x15 = 21**

**0** -113dBm or less

**1** -111dBm

**2...30** -109dBm... -53dBm

355

356

**31** -51dBm or greater

357

358

**99** Not known or not detectable

359

360

361

(% style="color:blue" %)**Timestamp: **

362

363

Unit Timestamp Example: 650abc40(H) = 1695202368(D)

364

365

Put the decimal value into this link([[https:~~/~~/www.epochconverter.com)>>https://www.epochconverter.com]]) to get the time.

366

367

368

=== 2.2.3 ThingsBoard Payload(Type~=3) ===

369

370

371

Type3 payload special design for ThingsBoard, it will also configure other default server to ThingsBoard.

372

373

(% style="color:#4472c4" %)** {"IMEI": "866207058378443","Model": "DS03A","flow": 502,"battery": 3.57,"signal": 23}**

374

375

[[image:image-20230922094043-2.png||height="558" width="851"]]

376

377

378

=== 2.2.4 ThingSpeak Payload(Type~=1) ===

379

380

381

This payload meets ThingSpeak platform requirement. It includes only four fields. Form 1~~3 are:

382

383

Distance, Battery & Signal. This payload type only valid for ThingsSpeak Platform

As below:

(% style="color:#4472c4" %)**field1=Flow value&field2=Battery value&field3=signal value**

388

389

[[image:image-20231114165017-6.png]]

390

391

[[image:image-20231114174523-8.png||height="682" width="1041"]]

392

393

394

== 2.3 Uplink Payload ==

395

396

=== 2.3.1 Sensor Configuration, FPORT~=4 ===

397

398

399

DS03A-NB will only send this command after getting the downlink command **(0x26 02)** from the server.

400

401

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)

402

|(% colspan="8" style="background-color:#4f81bd; color:white; width:515px" %)**Sensor Configuration FPORT=4**

403

404

|**Value**|(% style="width:75px" %)TDC (unit:sec)|(% style="width:77px" %)Disalarm|(% style="width:96px" %)(((

405

Keep status1

406

)))|(% style="width:99px" %)(((

407

Keep time1(unit: sec)

408

)))|(% style="width:87px" %)Keep status2|(% style="width:97px" %)(((

409

Keep time2(unit: sec)

410

)))|(% style="width:98px" %)(((

411

Alarm interval(unit: min)

412

)))

413

414

Example parse in TTNv3

415

416

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/DS03A-LB/WebHome/image-20230630155527-3.png?width=902&height=146&rev=1.1||alt="image-20230630155527-3.png"]]

* (((

(% style="color:blue" %)**TDC: (default: 0x001C20)**

421

)))

422

423

Uplink interval for the Open/Close Event, default value is 0x001C20 which is 7200 seconds = 2 hours.

* (((

(% style="color:blue" %)**Disalarm: (default: 0)**

428

)))

429

430

**If Disalarm = 1**, DS03A-NB will only send uplink at every TDC periodically. This is normally use for pulse meter application, in this application, there are many open/close event, and platform only care about the total number of pulse.

431

432

**If Disalarm = 0**, DS03A-NB will send uplink at every TDC periodically and send data on each open/close event. This is useful for the application user need to monitor the open/close event in real-time.

433

434

(% style="color:red" %)** Note: When Disalarm=0, a high frequently open/close event will cause lots of uplink and drain battery very fast. **

* (((

(% style="color:blue" %)**Keep Status1 & Keep Time1 & Keep Status2 & Keep Time2**

439

)))

440

441

Shows the configure value of [[Alarm Base on Timeout Feature>>||anchor="H2.9AlarmBaseonTimeout"]]

* (((

(% style="color:blue" %)**Alarm interval(default: 0)**

446

)))

447

448

When the state of the door sensor has not been changed after the timeout alarm, the device will send a uplink every alarm interval. It will stop the alarm until the state of the door sensor is changed after the timeout alarm.

449

450

451

=== 2.3.2 Real-Time Open/Close Status, Uplink FPORT~=2 ===

452

453

454

DS03A-NB will send this uplink **after** Device Status once join the LoRaWAN network successfully. And DS03A-NB will send uplinks when:

455

456

* Every 2 hours, this interval [[can be changed>>||anchor="H2.7SetTransmitIntervalTime"]].

457

* There is an Open/Close event. (This info can be disabled by AT+DISALARM=1)

458

459

**1) When (% style="color:blue" %)AT+TTRCHANNEL=1(%%), Uplink Payload totals (% style="color:blue" %)11 bytes. (Default mode)(%%)**

460

461

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)

462

|=(% colspan="5" style="background-color:#4F81BD;color:white;width:515px" %)**Real-Time Open/Close Status, FPORT=2**

463

464

|(% style="width:95px" %)**Value**|(% style="width:97px" %)(((

465

Status & [[Alarm>>||anchor="H2.10TTRIG126TTRIG2timeoutstatusalarm"]]

466

)))|(% style="width:95px" %)Total open door events|(% style="width:119px" %)(((

467

The last door open duration (unit: sec)

468

)))|(% style="width:108px" %)Unix TimeStamp

**Status & Alarm:**

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)

473

|(% style="background-color:#4f81bd; color:white; width:50px" %)**Size(bit)**|(% style="background-color:#4f81bd; color:white; width:60px" %)**[bit7:bit4]**|(% style="background-color:#4f81bd; color:white; width:80px" %)**bit3**|(% style="background-color:#4f81bd; color:white; width:100px" %)**bit2**|(% style="background-color:#4f81bd; color:white; width:120px" %)**bit1**|(% style="background-color:#4f81bd; color:white; width:105px" %)**bit0**

474

|(% style="width:76px" %)**Value**|(% style="width:96px" %)Reserve|(% style="width:110px" %)(((

475

Count mod

476

)))|(% style="width:106px" %)TDC flag 0:No;1:Yes|(% style="width:148px" %)(((

477

Alarm 0: No Alarm; 1: Alarm

478

)))|(% style="width:131px" %)(((

479

Status 0: Close; 1: Open

480

)))

481

482

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/DS03A-LB/WebHome/image-20230630155451-2.png?width=928&height=246&rev=1.1||alt="image-20230630155451-2.png"]]

* (((

(% style="color:blue" %)**Count mod:Default=0**

487

)))

488

489

0: Uplink total open door times since factory

490

491

1: Uplink total open door times since last FPORT=2 uplink.

492

493

494

* (% style="color:blue" %)**TDC flag**

495

496

When the flag is 1, it means sending packets at normal time intervals.

497

498

Otherwise, it is a packet sent at non-TDC time.

* (((

(% style="color:#0000ff" %)**Alarm**

503

)))

504

505

See [[Alarm Base on Timeout>>||anchor="H2.9AlarmBaseonTimeout"]]

* (((

(% style="color:blue" %)**Status**

510

)))

511

512

This bit is 1 when the door sensor is open and 0 when it is close.

* (((

(% style="color:blue" %)**Total open door events**

517

)))

518

519

Total pulse/counting base on open door.

520

521

Range (3 Bytes) : 0x000000 ~~ 0xFFFFFF . Max: 16777215

* (((

(% style="color:blue" %)**The last door open duration**

526

)))

527

528

Door sensor last open duration.

Unit: sec.

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/DS03A-LB/WebHome/image-20230701094042-1.png?width=763&height=154&rev=1.1||alt="image-20230701094042-1.png"]]

533

534

535

**2) When (% style="color:blue" %)AT+TTRCHANNEL=2(%%), Uplink Payload totals (% style="color:blue" %)18 bytes(%%)**(% style="color:blue" %).

536

537

(When the maximum DR of some frequencies is 11 bytes, it will cause the server to receive empty packets)

538

539

(% style="color:red" %)**Note:When using the AT+TTRCHANNEL=2 command, the Datalog function cannot be used.**

540

541

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)

542

|=(% colspan="8" style="background-color:#4F81BD;color:white; width: 515px;" %)**Real-Time Open/Close Status, FPORT=2**

543

544

|(% style="width:95px" %)**Value**|(% style="width:97px" %)(((

545

Status1 & Alarm1

546

)))|(% style="width:95px" %)Total open door events1|(% style="width:125px" %)(((

547

The last door open duration1 (unit: sec)

548

)))|(% style="width:100px" %)Unix TimeStamp|(% style="width:86px" %)(((

549

Status2 & Alarm2

550

)))|(% style="width:96px" %)Total open door events2|(% style="width:126px" %)The last door open duration2 (unit: sec)

551

552

**Status1 & Alarm1:**

553

554

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:514px" %)

555

|(% style="background-color:#4f81bd; color:white; width:50px" %)**Size(bit)**|(% style="background-color:#4f81bd; color:white; width:60px" %)**[bit7:bit4]**|(% style="background-color:#4f81bd; color:white; width:70px" %)**bit3**|(% style="background-color:#4f81bd; color:white; width:100px" %)**bit2**|(% style="background-color:#4f81bd; color:white; width:117px" %)**bit1**|(% style="background-color:#4f81bd; color:white; width:117px" %)**bit0**

556

|(% style="width:76px" %)**Value**|(% style="width:96px" %)Reserve|(% style="width:99px" %)(((

557

Count mod

558

)))|(% style="width:103px" %)TDC flag 0:No;1:Yes|(% style="width:216px" %)(((

559

Alarm1 0: No Alarm; 1: Alarm (PA8 of pin)

560

)))|(% style="width:181px" %)(((

561

Status1 0: Close; 1: Open (PA8 of pin)

562

)))

563

564

**Status2 & Alarm2:**

565

566

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)

567

|(% style="background-color:#4f81bd; color:white; width:50px" %)**Size(bit)**|(% style="background-color:#4f81bd; color:white; width:60px" %)**[bit7:bit2]**|(% style="background-color:#4f81bd; color:white; width:200px" %)**bit1**|(% style="background-color:#4f81bd; color:white; width:200px" %)**bit0**

568

|(% style="width:76px" %)**Value**|(% style="width:113px" %)Reserve|(% style="width:219px" %)(((

569

Alarm2 0: No Alarm; 1: Alarm (PA4 of pin)

570

)))|(% style="width:181px" %)(((

571

Status2 0: Close; 1: Open (PA4 of pin)

572

)))

573

574

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/DS03A-LB/WebHome/image-20230630155908-6.png?width=927&height=295&rev=1.1||alt="image-20230630155908-6.png"]]

* (((

(% style="color:blue" %)**Count mod:Default=0**

579

)))

580

581

0: Uplink total open door times since factory

582

583

1: Uplink total open door times since last FPORT=2 uplink.

584

585

586

* (% style="color:blue" %)**TDC flag**

587

588

When the flag is 1, it means sending packets at normal time intervals.

589

590

Otherwise, it is a packet sent at non-TDC time.

* (((

(% style="color:#0000ff" %)**Alarm1 or Alarm2**

595

)))

596

597

See [[Alarm Base on Timeout>>||anchor="H2.9AlarmBaseonTimeout"]]

* (((

(% style="color:blue" %)**Status1 **(% style="color:#0000ff" %)**or **(% style="color:blue" %)**Status2**

602

)))

603

604

This bit is 1 when the door sensor is open and 0 when it is close.

* (((

(% style="color:blue" %)**Total open door events1 **(% style="color:#0000ff" %)**or**(% style="color:blue" %)** Total open door events2**

609

)))

610

611

Total pulse/counting base on open door.

612

613

Range (3 Bytes) : 0x000000 ~~ 0xFFFFFF . Max: 16777215

* (((

(% style="color:blue" %)**The last door open duration1 **(% style="color:#0000ff" %)**or**(% style="color:blue" %)** The last door open duration2**

618

)))

619

620

Door sensor last open duration.

Unit: sec.

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/DS03A-LB/WebHome/image-20230701094042-1.png?width=763&height=154&rev=1.1||alt="image-20230701094042-1.png"]]

625

626

627

=== 2.3.3 Historical Door Open/Close Event, FPORT~=3 ===

628

629

630

DS03A-NB stores sensor values and users can retrieve these history values via the downlink command.

631

632

The historical payload includes one or multiplies entries and every entry has the same payload as Real-Time open/close status.

633

634

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)

635

|=(% colspan="5" style="background-color:#4F81BD;color:white;width:515px" %)**Real-Time Open/Close Status, FPORT=3**

636

637

|(% style="width:95px" %)**Value**|(% style="width:97px" %)(((

638

Status & [[Alarm>>||anchor="2.9AlarmBaseonTimeout"]]

639

)))|(% style="width:95px" %)Total open door events|(% style="width:119px" %)(((

640

The last door open duration (unit: sec)

641

)))|(% style="width:108px" %)Unix TimeStamp

**Status & Alarm:**

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)

646

|(% style="background-color:#4f81bd; color:white; width:50px" %)**Size(bit)**|(% style="background-color:#4f81bd; color:white; width:75px" %)**bit7**|(% style="background-color:#4f81bd; color:white; width:65px" %)**bit6**|(% style="background-color:#4f81bd; color:white; width:50px" %)**[bit5:bit4]**|(% style="background-color:#4f81bd; color:white; width:50px" %)**bit3**|(% style="background-color:#4f81bd; color:white; width:70px" %)**bit2**|(% style="background-color:#4f81bd; color:white; width:80px" %)**bit1**|(% style="background-color:#4f81bd; color:white; width:75px" %)**bit0**

647

648

Count mod

649

)))|(% style="width:95px" %)(((

650

TDC flag 0:No; 1:Yes

651

)))|(% style="width:116px" %)(((

652

Alarm 0: No Alarm; 1: Alarm

653

)))|(% style="width:112px" %)(((

654

Status 0:Close; 1: Open

)))

* (((

Each data entry is 11 bytes and has the same structure as [[Real-Time open/close status>>||anchor="H2.3.2A0Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2"]], to save airtime and battery, DS03A-NB will send max bytes according to the current DR and Frequency bands.

659

)))

660

661

For example, in the US915 band, the max payload for different DR is:

662

663

(((

664

**~1. DR0**: max is 11 bytes so one entry of data

)))

(((

**2. DR1**: max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)

)))

(((

**3. DR2**: total payload includes 11 entries of data

)))

(((

**4. DR3**: total payload includes 22 entries of data.

677

)))

678

679

If DS03A-NB doesn't have any data in the polling time. It will uplink 11 bytes of 0

680

681

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/DS03A-LB/WebHome/image-20230630155556-4.png?width=938&height=146&rev=1.1||alt="image-20230630155556-4.png"]]

**Downlink:**

0x31 64 9E 7D 34 64 9E 7E 9C 05

**Uplink:**

45 00 00 00 00 00 00 64 9E 7D 48 40 00 00 00 00 00 63 64 9E 7D 9C 41 00 00 01 00 00 63 64 9E 7D A4 40 00 00 01 00 00 8D 64 9E 7E 31 43 00 00 02 00 00 8D 64 9E 7E 44 48 00 00 02 00 00 1F 64 9E 7E 59 4B 00 00 03 00 00 1F 64 9E 7E 6B

**Parsed Value:**

[COUNTMOD, TDC_FLAG, ALARM, DOOR_STATUS, OPEN_DOOR_TIMES, LAST_DOOR_OPEN_DURATION, TIME]

696

697

698

[SUM,YES,FALSE,OPEN,0,0,2023-06-30 06:59:20],

699

700

[SUM,NO,FALSE,CLOSE,0,99,2023-06-30 07:00:44],

701

702

[SUM,NO,FALSE,OPEN, 1,99,2023-06-30 07:00:52],

703

704

[SUM,NO,FALSE,CLOSE,1,141,2023-06-30 07:03:13],

705

706

[SUM,NO,TRUE,OPEN, 2,141,2023-06-30 07:03:32],

707

708

[PART,NO,FALSE,CLOSE,2,31,2023-06-30 07:03:53],

709

710

[PART,NO,TRUE,OPEN, 3,31,2023-06-30 07:04:11],

711

712

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/DS03A-LB/WebHome/image-20230630172740-1.png?width=868&height=199&rev=1.1||alt="image-20230630172740-1.png"]]

713

714

715

== 2.4 Test Uplink and Change Update Interval ==

716

717

718

By default, Sensor will send uplinks (% style="color:blue" %)**every 2 hours**(%%) & AT+NOUD=8

719

720

User can use below commands to change the (% style="color:blue" %)**uplink interval**.

721

722

(% style="color:#037691" %)**AT+TDC=600 ** (%%) ~/~/ Set Update Interval to 600s

723

724

User can also push the button for more than 1 seconds to activate an uplink.

725

726

727

== 2.5 Multi-Samplings and One uplink ==

728

729

730

To save battery life, DS03A-NB will sample Water Flow data every 15 minutes and send one uplink every 2 hours. So each uplink it will include 8 stored data + 1 real-time data. They are defined by:

731

732

* (% style="color:#037691" %)**AT+TR=900** (%%) ~/~/ The unit is seconds, and the default is to record data once every 900 seconds (15 minutes, the minimum can be set to 180 seconds)

733

734

* (% style="color:#037691" %)**AT+NOUD=8** (%%)~/~/ The device uploads 8 sets of recorded data by default. Up to 32 sets of record data can be uploaded.

735

736

The diagram below explains the relationship between TR, NOUD, and TDC more clearly:

737

738

[[image:1692424376354-959.png]]

739

740

741

== 2.6 Trggier an uplink by external interrupt ==

742

743

744

DS03A-NB has an external trigger interrupt function. Users can use the PB15 pin to trigger the upload of data packets.

745

746

(% style="color:blue" %)**AT command:**

747

748

* (% style="color:#037691" %)**AT+INTMOD **(%%) ~/~/ Set the trigger interrupt mode

749

750

* (% style="color:#037691" %)**AT+INTMOD=0 **(%%) ~/~/ Disable Interrupt

751

752

* (% style="color:#037691" %)**AT+INTMOD=1 **(%%) ~/~/ Trigger by rising and falling edge

753

754

* (% style="color:#037691" %)**AT+INTMOD=2 **(%%) ~/~/ Trigger by falling edge

755

756

* (% style="color:#037691" %)**AT+INTMOD=3 **(%%) ~/~/ Trigger by rising edge

757

(% style="display:none" %) (%%)

758

759

== 2.7 Set Transmit Interval Time ==

(((

Feature: Change NB-IoT End Node Transmit Interval.

)))

(((

(% style="color:blue" %)**AT Command: AT+TDC**

768

)))

769

770

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)

771

|=(% style="width: 156px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 137px;background-color:#4F81BD;color:white" %)**Function**|=(% style="background-color:#4F81BD;color:white" %)**Response**

772

|(% style="width:156px" %)AT+TDC=?|(% style="width:137px" %)Show current transmit Interval|(((

773

30000

774

OK

775

the interval is 30000ms = 30s

776

)))

777

|(% style="width:156px" %)AT+TDC=60000|(% style="width:137px" %)Set Transmit Interval|(((

778

OK

779

Set transmit interval to 60000ms = 60 seconds

)))

(((

(% style="color:blue" %)**Downlink Command: 0x01**

)))

(((

Format: Command Code (0x01) followed by 3 bytes time value.

)))

(((

If the downlink payload=0100003C, it means set the END Node's Transmit Interval to 0x00003C=60(S), while type code is 01.

)))

* (((

Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds

796

)))

797

* (((

798

Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds

799

)))(% style="display:none" %) (%%)

800

801

== 2.8 Enable / Disable Alarm ==

802

803

804

Feature: Enable/Disable Alarm for open/close event. Default value 0.

805

806

(% style="color:blue" %)**AT Command: **

807

808

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)

809

|(% style="background-color:#4f81bd; color:white; width:153px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:276px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:86px" %)**Response**

810

|(% style="width:154px" %)AT+DISALARM=1|(% style="width:278px" %)End node will only send packets in TDC time.|OK

811

|(% style="width:154px" %)AT+DISALARM=0|(% style="width:278px" %)End node will send packets in TDC time or status change for door sensor|OK

812

813

(% style="color:blue" %)**Downlink Command: **

814

815

0xA7 01 ~/~/ Same As AT+DISALARM=1

816

817

0xA7 00 ~/~/ Same As AT+DISALARM=0

818

819

820

== 2.9 Alarm Base on Timeout ==

821

822

823

DS03A-NB can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:

824

825

* (((

826

(% style="color:blue" %)**Keep Status: Status to be monitor**

827

)))

828

829

(% style="color:#037691" %)**Keep Status = 1**(%%): Monitor Close to Open event

830

831

(% style="color:#037691" %)**Keep Status = 0**(%%): Monitor Open to Close event

* (((

(% style="color:blue" %)**Keep Time: Timeout to send an Alarm**

836

)))

837

838

Range 0 ~~ 65535(0xFFFF) seconds.

839

840

If (% style="color:#037691" %)**keep time = 0**(%%), Disable Alarm Base on Timeout feature.

841

842

If (% style="color:#037691" %)**keep time > 0**(%%), device will monitor the keep status event and send an alarm when status doesn't change after timeout.

* (((

(% style="color:blue" %)**Downlink Command**

847

)))

848

849

(% style="color:#037691" %)**Command: 0xA9 aa bb cc dd**

850

851

**A9:** Command Type Code

852

853

**aa: **01:TTRIG1; 02:TTRIG2

854

855

**bb:** status to be monitored

**cc dd:** timeout.

**1) AT+TTRIG1 : (PA8 of pin)**

861

862

(% style="color:blue" %)**AT Command to configure:**

863

864

* (((

865

(% style="color:#037691" %)**AT+TTRIG1=1,30** (%%) **~-~->** When the **Keep Status** change from close to open, and device remains in open status for more than 30 seconds. DS03A-NB will send an uplink packet, the Alarm1 bit(the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.

866

867

(% style="color:#037691" %)**AT+TTRIG1=0,30** (%%) **~-~->** When the **Keep Status** change from open to close, and device remains in open status for more than 30 seconds. DS03A-NB will send an uplink packet, the Alarm1 bit (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.

)))

* (((

(% style="color:#037691" %)**AT+TTRIG1=0,0** (%%) **~-~-> ** Default Value, disable timeout Alarm.

)))

(% style="color:blue" %)**Downlink Command to configure:**

877

878

If user send 0xA9 01 01 00 1E: equal to AT+TTRIG1=1,30 **or** 0xA9 01 00 00 00: Equal to AT+TTRIG1=0,0.

879

880

881

**2) AT+TTRIG2 : (PA4 of pin,need to use AT+TTRCHANNEL=2)**

882

883

(% style="color:blue" %)**AT Command to configure:**

884

885

* (((

886

(% style="color:#037691" %)**AT+TTRIG2=1,30** (%%) **~-~->** When the **Keep Status** change from close to open, and device remains in open status for more than 30 seconds. DS03A-NB will send an uplink packet, the Alarm2 bit (the second bit of 12^^st^^ byte of payload) on this uplink packet is set to 1.

887

888

(% style="color:#037691" %)**AT+TTRIG2=0,30** (%%) **~-~->** When the **Keep Status** change from open to close, and device remains in open status for more than 30 seconds. DS03A-NB will send an uplink packet, the Alarm2 bit (the second bit of 12^^st^^ byte of payload) on this uplink packet is set to 1.

)))

* (((

(% style="color:#037691" %)**AT+TTRIG2=0,0** (%%) **~-~-> ** Default Value, disable timeout Alarm.

)))

(% style="color:blue" %)**Downlink Command to configure:**

898

899

If user send 0xA9 02 00 00 1E: equal to AT+TTRIG2=0,30 **or** 0xA9 02 00 00 00: Equal to AT+TTRIG2=0,0.

900

901

902

== 2.10 TTRIG1 & TTRIG2 timeout status alarm ==

903

904

905

It needs to be used with AT+TTRIG1 or AT+TTRIG2. When TTRIG1 or TTRIG2 times out and causes an alarm, and the status does not change subsequently, an alarm packet will be sent at the alarm interval.

906

907

(% style="color:blue" %)**AT Command:**

908

909

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)

910

|=(% style="width: 155px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 279px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 76px;background-color:#4F81BD;color:white" %)**Response**

911

|(% style="width:155px" %)(((

912

AT+TTRALARM=0

913

)))|(% style="width:279px" %)(((

914

disable continuous alarm

915

)))|(% style="width:84px" %)(((

916

OK

917

)))

918

|(% style="width:155px" %)(((

919

AT+TTRALARM=60

920

)))|(% style="width:279px" %)(((

921

The alarm interval is 60 minutes (unit: minutes)

922

)))|(% style="width:84px" %)(((

OK

)))

(% style="color:blue" %)**Downlink Command:**

927

928

Example: 0C aa => AT+TTRALARM= aa

== 2.11 Count Mod ==

Feature: Manually set the count mode.

935

936

(% style="color:blue" %)**AT Command:**

937

938

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)

939

|=(% style="width: 154px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 275px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 86px;background-color:#4F81BD;color:white" %)**Response**

940

|(% style="width:155px" %)(((

941

AT+COUNTMOD=0

942

)))|(% style="width:277px" %)(((

943

the count value keeps accumulating mode

944

)))|(% style="width:86px" %)(((

945

OK

946

)))

947

|(% style="width:155px" %)(((

948

AT+COUNTMOD=1

949

)))|(% style="width:277px" %)(((

950

the count value will be reset after each TDC time(Last Close Duration Reset after each uplink)

951

)))|(% style="width:86px" %)(((

OK

)))

(% style="color:blue" %)**Downlink Command:**

956

957

Example: 0B aa => AT+COUNTMOD = second byte

958

959

960

== 2.12 Number of channel of door sensors ==

961

962

963

Feature: Set the number of door sensor channels.

964

965

(% style="color:blue" %)**AT Command:**

966

967

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)

968

|=(% style="width: 155px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 288px; background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 57px;background-color:#4F81BD;color:white" %)**Response**

969

|(% style="width:155px" %)(((

970

AT+TTRCHANNEL=1

971

)))|(% style="width:259px" %)(((

972

Set as single channel, only use PA8 pin as interrupt pin.

973

)))|(% style="width:44px" %)(((

974

OK

975

)))

976

|(% style="width:155px" %)(((

977

AT+TTRCHANNEL=2

978

)))|(% style="width:259px" %)(((

979

Set as dual channel, use PA8 pin and PA4 pin as interrupt pin.

980

)))|(% style="width:44px" %)(((

OK

)))

(% style="color:blue" %)**Downlink Command:**

985

986

Example: 0D aa => AT+TTRCHANNEL = second byte

987

988

989

== 2.13 Clear the open door times and the duration of the last open door ==

990

991

992

(% style="color:blue" %)**AT Command:**

993

994

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)

995

|=(% style="width: 163px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 290px; background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 57px;background-color:#4F81BD;color:white" %)**Response**

996

|(% style="width:155px" %)AT+CLRC|(% style="width:259px" %)clear the open door times and the duration of the last open door.|(% style="width:44px" %)(((

OK

)))

(% style="color:blue" %)**Downlink Command:**(%%)0xA6 01

1001

1002

The sensor will clear the open door times and the duration of the last open door.

1003

1004

1005

== 2.14 Set the count value of the number of open door ==

1006

1007

1008

(% style="color:blue" %)**AT Command:**

1009

1010

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)

1011

|=(% style="width: 155px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 288px; background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 57px;background-color:#4F81BD;color:white" %)**Response**

1012

|(% style="width:155px" %)(((

1013

AT+SETCNT=1,100

1014

)))|(% style="width:259px" %)(((

1015

Set the open door times of PA8 pin to 100 times.

1016

)))|(% style="width:44px" %)(((

1017

OK

1018

)))

1019

|(% style="width:155px" %)AT+SETCNT=1,0|(% style="width:259px" %)Clear the open door times of PA8 pin.|(% style="width:44px" %)OK

1020

|(% style="width:155px" %)(((

1021

AT+SETCNT=2,50

1022

)))|(% style="width:259px" %)(((

1023

Set the open door times of PA4 pin to 100 times.

1024

)))|(% style="width:44px" %)(((

OK

)))

(% style="color:blue" %)**Downlink Command:**

1029

1030

0xA6 01 00 00 64 ==> AT+SETCNT=1,100

1031

1032

0xA6 01 00 00 00 ==> AT+SETCNT=1,0

1033

1034

0xA6 02 00 00 32 ==> AT+SETCNT=2,50

1035

1036

1037

= 3. Configure DS03A-NB =

1038

1039

== 3.1 Configure Methods ==

1040

1041

1042

DS03A-NB supports below configure method:

1043

1044

* AT Command via Bluetooth Connection (**Recommended**): [[BLE Configure Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].

1045

1046

* AT Command via UART Connection : See [[UART Connection>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H2.3UARTConnectionforSN50v3basemotherboard]].

1047

(% style="display:none" %) (%%)

1048

1049

== 3.2 AT Commands Set ==

1050

1051

1052

AT+<CMD>? : Help on <CMD>

AT+<CMD> : Run <CMD>

AT+<CMD>=<value> : Set the value

1057

1058

AT+<CMD>=? : Get the value

1059

1060

1061

(% style="color:blue" %)**General Commands**

AT : Attention

AT? : Short Help

ATZ : MCU Reset

AT+TDC : Application Data Transmission Interval

1070

1071

AT+CFG : Print all configurations

1072

1073

AT+CFGMOD : Working mode selection

1074

1075

AT+DEUI : Get or set the Device ID

1076

1077

AT+INTMOD : Set the trigger interrupt mode

1078

1079

AT+5VT : Set extend the time of 5V power

1080

1081

AT+PRO : Choose agreement

1082

1083

AT+RXDL : Extend the sending and receiving time

1084

1085

AT+DNSCFG : Get or Set DNS Server

1086

1087

AT+GETSENSORVALUE : Returns the current sensor measurement

1088

1089

AT+NOUD : Get or Set the number of data to be uploaded

1090

1091

AT+CDP : Read or Clear cached data

1092

1093

AT+SHTEMP: Get or Set alarm of temp

1094

1095

AT+SHHUM: Get or Set alarm of moisture

1096

1097

AT+SERVADDR : Server Address

1098

1099

1100

(% style="color:blue" %)**UDP Management**

1101

1102

AT+CFM : Upload confirmation mode (only valid for UDP)

1103

1104

1105

(% style="color:blue" %)**MQTT Management**

1106

1107

AT+CLIENT : Get or Set MQTT client

1108

1109

AT+UNAME : Get or Set MQTT Username

1110

1111

AT+PWD : Get or Set MQTT password

1112

1113

AT+PUBTOPIC : Get or Set MQTT publish topic

1114

1115

AT+SUBTOPIC : Get or Set MQTT subscription topic

1116

1117

1118

(% style="color:blue" %)**Information**

1119

1120

AT+FDR : Factory Data Reset

1121

1122

AT+PWORD : Serial Access Password

1123

1124

AT+LDATA : Get the last upload data

1125

1126

AT+CDP : Read or Clear cached data

1127

1128

1129

= 4. Battery & Power Consumption =

1130

1131

1132

DS03A-NB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.

1133

1134

[[**Battery Info & Power Consumption Analyze**>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .

1135

1136

1137

= 5. Firmware update =

1138

1139

1140

User can change device firmware to::

1141

1142

* Update with new features.

* Fix bugs.

Firmware and changelog can be downloaded from : **[[Firmware download link>>https://www.dropbox.com/sh/zbsm9p4coksqwd5/AADy2ZJc39KsvfbhTMCUGmz1a?dl=0]]**

1147

1148

Methods to Update Firmware:

1149

1150

* (Recommended way) OTA firmware update via BLE: [[**Instruction**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/BLE_Firmware_Update_NB_Sensors_BC660K-GL/]].

1151

1152

* Update through UART TTL interface : **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.

1153

(% style="display:none" %) (%%)

= 6. FAQ =

== 6.1 How can I access t BC660K-GL AT Commands? ==

1158

1159

1160

User can access to BC660K-GL directly and send AT Commands.

1161

1162

[[See BC660K-GL AT Command set>>url:https://www.dropbox.com/sh/5f6ssda5fum8rvs/AABT68l8ZzWOvZ5eg2qwOoFda?dl=0]]

= 7. Order Info =

Part Number: (% style="color:blue" %)**DS03A-NB-XX**

1169

1170

(% style="color:red" %)**XX**(%%):

1171

1172

* (% style="color:#037691" %)**GE**(%%): General version ( Exclude SIM card)

1173

1174

* (% style="color:#037691" %)**1D**(%%): with 1NCE* 10 years 500MB SIM card and Pre-configure to DataCake server

1175

1176

(% style="color:#037691" %)**1NCE SIM Card NB-IoT network coverage**(%%): Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Finland, Germany, Great Britain, Greece, Hungary, Ireland, Italy, Latvia, Malta, Netherlands, Norway, Puerto Rico, Russia, Slovak , Republic, Slovenia, Spain, Sweden, Switzerland, Taiwan, USA, US Virgin Islands

= 8. Packing Info =

(% style="color:#037691" %)**Package Includes**:

1183

1184

* DS03A-NB NB-IoT Door sensor x 1

1185

1186

* External antenna x 1

1187

1188

(% style="color:#037691" %)**Dimension and weight**:

1189

1190

* Device Size: 13.0 x 5 x 4.5 cm

1191

1192

* Device Weight: 150g

1193

1194

* Package Size / pcs : 14.0 x 8x 5 cm

1195

1196

* Weight / pcs : 180g

1197

(% style="display:none" %) (%%)

= 9. Support =

* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.

1203

1204

* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[Support@dragino.cc>>mailto:Support@dragino.cc]].

1205

1206

(% style="display:none" %) (%%)

Wiki source code of DS03A-NB -- NB-IoT Door Sensor User Manual

Applications

Navigation