Changes for page wiki_test

Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -298,6 +298,7 @@
298	298
299	299	* Json entry 1 ~~ 8 are the last 1 ~~ 8 sampling data as specify by (% style="color:#037691" %)**AT+NOUD=8 ** (%%)Command. Each entry includes (from left to right): Temperature, Humidity, Sampling time.
300	300
	301	+
301	301	=== 2.2.2 HEX format Payload(Type~=0) ===
302	302
303	303
...	...	@@ -348,7 +348,6 @@
348	348	(FF3F & 8000：Judge whether the highest bit is 1, when the highest bit is 1, it is negative)
349	349
350	350
351		-
352	352	(% style="color:blue" %)**Humidity:   **
353	353
354	354	Read:0295(H)=661(D)    Value:  661 / 10=66.1, So 66.1%
...	...	@@ -398,9 +398,9 @@
398	398
399	399	To save battery life, S31-NB will sample temperature & humidity data every 15 minutes and send one uplink every 2 hours. So each uplink it will include 8 stored data + 1 real-time data. They are defined by:
400	400
401		-* (% style="color:#037691" %)**AT+TR=900**   (%%) ~/~/  The unit is seconds, and the default is to record data once every 900 seconds (15 minutes, the minimum can be set to 180 seconds)
	401	+* (% style="color:#037691" %)**AT+TR=900**   (%%) ~/~/ The unit is seconds, and the default is to record data once every 900 seconds (15 minutes, the minimum can be set to 180 seconds)
402	402
403		-* (% style="color:#037691" %)**AT+NOUD=8**  (%%)~/~/   The device uploads 8 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
	403	+* (% style="color:#037691" %)**AT+NOUD=8**     (%%)~/~/  The device uploads 8 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
404	404
405	405	The diagram below explains the relationship between TR, NOUD, and TDC more clearly:
406	406
...	...	@@ -417,12 +417,12 @@
417	417
418	418	(% style="color:#037691" %)**AT+ SHHUM=min,max**
419	419
420		-Example: AT+ SHHUM=50,80 ~/~/ Alarm when humidity lower than 50 or higher than 80.
	420	+Example: AT+ SHHUM=50,80  ~/~/ Alarm when humidity lower than 50 or higher than 80.
421	421
422	422
423	423	(% style="color:#037691" %)**AT+ SHTEMP=min,max**
424	424
425		-Example: AT+ SHTEMP=20,30 ~/~/ Alarm when temperature lower than 20 or higher than 30
	425	+Example: AT+ SHTEMP=20,30  ~/~/ Alarm when temperature lower than 20 or higher than 30
426	426
427	427
428	428	(% style="color:red" %)**Notice:**
...	...	@@ -432,7 +432,6 @@
432	432	* If user only want to send only min or max, user can set the alarm to a value that device won’t reach. For example: (% style="color:#037691" %)**AT+SHTEMP=-80,0.**
433	433
434	434
435		-
436	436	== 2.6 Trggier an uplink by external interrupt ==
437	437
438	438
...	...	@@ -440,17 +440,16 @@
440	440
441	441	(% style="color:blue" %)**AT command:**
442	442
443		-* (% style="color:#037691" %)**AT+INTMOD **(%%) ~/~/ Set the trigger interrupt mode
	442	+* (% style="color:#037691" %)**AT+INTMOD **(%%) ~/~/ Set the trigger interrupt mode
444	444
445		-* (% style="color:#037691" %)**AT+INTMOD=0 **(%%) ~/~/Disable Interrupt
	444	+* (% style="color:#037691" %)**AT+INTMOD=0 **(%%) ~/~/ Disable Interrupt
446	446
447		-* (% style="color:#037691" %)**AT+INTMOD=1 **(%%) ~/~/Trigger by rising and falling edge
	446	+* (% style="color:#037691" %)**AT+INTMOD=1 **(%%) ~/~/ Trigger by rising and falling edge
448	448
449		-* (% style="color:#037691" %)**AT+INTMOD=2 **(%%) ~/~/Trigger by falling edge
	448	+* (% style="color:#037691" %)**AT+INTMOD=2 **(%%) ~/~/ Trigger by falling edge
450	450
451		-* (% style="color:#037691" %)**AT+INTMOD=3  **(%%) ~/~/Trigger by rising edge
	450	+* (% style="color:#037691" %)**AT+INTMOD=3  **(%%) ~/~/ Trigger by rising edge
452	452
453		-
454	454	= 3. Configure S31x-NB =
455	455
456	456	== 3.1 Configure Methods ==
...	...	@@ -462,224 +462,108 @@
462	462
463	463	* AT Command via UART Connection : See [[UART Connection>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H2.3UARTConnectionforSN50v3basemotherboard]].
464	464
465		-* LoRaWAN Downlink.  Instruction for different platforms: See [[IoT LoRaWAN Server>>http://wiki.dragino.com/xwiki/bin/view/Main/]] section.
	463	+== 3.2 AT Commands Set ==
466	466
467	467
468		-== 3.2 General Commands ==
	466	+AT+<CMD>?        : Help on <CMD>
469	469
	468	+AT+<CMD>         : Run <CMD>
470	470
471		-These commands are to configure:
	470	+AT+<CMD>=<value> : Set the value
472	472
473		-* General system settings like: uplink interval.
474		-* LoRaWAN protocol & radio related command.
	472	+AT+<CMD>=?       : Get the value
475	475
476		-They are same for all Dragino Devices which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:
477	477
478		-[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
	475	+(% style="color:blue" %)**General Commands**
479	479
	477	+AT                    : Attention
480	480
481		-== 3.3 Commands special design for S31x-LB ==
	479	+AT?  : Short Help
482	482
	481	+ATZ  : MCU Reset
483	483
484		-These commands only valid for S31x-LB, as below:
	483	+AT+TDC  : Application Data Transmission Interval
485	485
	485	+AT+CFG  : Print all configurations
486	486
487		-=== 3.3.1 Set Transmit Interval Time ===
	487	+AT+CFGMOD           : Working mode selection
488	488
	489	+AT+DEUI  : Get or set the Device ID
489	489
490		-Feature: Change LoRaWAN End Node Transmit Interval.
	491	+AT+INTMOD            : Set the trigger interrupt mode
491	491
492		-(% style="color:blue" %)**AT Command: AT+TDC**
	493	+AT+5VT           : Set extend the time of 5V power
493	493
494		-(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
495		-|=(% style="width: 156px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 137px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="background-color:#D9E2F3;color:#0070C0" %)**Response**
496		-|(% style="width:156px" %)AT+TDC=?|(% style="width:137px" %)Show current transmit Interval|(((
497		-30000
498		-OK
499		-the interval is 30000ms = 30s
500		-)))
501		-|(% style="width:156px" %)AT+TDC=60000|(% style="width:137px" %)Set Transmit Interval|(((
502		-OK
503		-Set transmit interval to 60000ms = 60 seconds
504		-)))
	495	+AT+PRO          : Choose agreement
505	505
506		-(% style="color:blue" %)**Downlink Command: 0x01**
	497	+AT+RXDL  : Extend the sending and receiving time
507	507
508		-Format: Command Code (0x01) followed by 3 bytes time value.
	499	+AT+DNSCFG  : Get or Set DNS Server
509	509
510		-If the downlink payload=0100003C, it means set the END Node's Transmit Interval to 0x00003C=60(S), while type code is 01.
	501	+AT+GETSENSORVALUE   : Returns the current sensor measurement
511	511
512		-* Example 1: Downlink Payload: 0100001E  ~/~/  Set Transmit Interval (TDC) = 30 seconds
513		-* Example 2: Downlink Payload: 0100003C  ~/~/  Set Transmit Interval (TDC) = 60 seconds
	503	+AT+NOUD  : Get or Set the number of data to be uploaded
514	514
515		-=== 3.3.2 Get Device Status ===
	505	+AT+CDP     : Read or Clear cached data
516	516
	507	+AT+SHTEMP:  Get or Set alarm of temp
517	517
518		-Send a LoRaWAN downlink to ask device send Alarm settings.
	509	+AT+SHHUM:  Get or Set alarm of moisture
519	519
520		-(% style="color:blue" %)**Downlink Payload:  **(%%)0x26 01
	511	+AT+SERVADDR :  Server Address
521	521
522		-Sensor will upload Device Status via FPORT=5. See payload section for detail.
523	523
	514	+(% style="color:blue" %)**UDP Management**
524	524
525		-=== 3.3.3 Set Temperature Alarm Threshold ===
	516	+AT+CFM  :  Upload confirmation mode (only valid for UDP)
526	526
527	527
528		-* (% style="color:blue" %)**AT Command:**
	519	+(% style="color:blue" %)**MQTT Management**
529	529
530		-(% style="color:#037691" %)**AT+SHTEMP=min,max**
	521	+AT+CLIENT               : Get or Set MQTT client
531	531
532		-* When min=0, and max≠0, Alarm higher than max
533		-* When min≠0, and max=0, Alarm lower than min
534		-* When min≠0 and max≠0, Alarm higher than max or lower than min
	523	+AT+UNAME              : Get or Set MQTT Username
535	535
536		-Example:
	525	+AT+PWD                  : Get or Set MQTT password
537	537
538		- AT+SHTEMP=0,30   ~/~/ Alarm when temperature higher than 30.
	527	+AT+PUBTOPIC  : Get or Set MQTT publish topic
539	539
540		-* (% style="color:blue" %)**Downlink Payload:**
	529	+AT+SUBTOPIC  : Get or Set MQTT subscription topic
541	541
542		-(% style="color:#037691" %)**0x(0C 01 00 1E)**  (%%) ~/~/ Set AT+SHTEMP=0,30
543	543
544		-(% style="color:red" %)**(note: 3^^rd^^ byte= 0x00 for low limit(not set), 4^^th^^ byte = 0x1E for high limit: 30)**
	532	+(% style="color:blue" %)**Information**
545	545
	534	+AT+FDR  : Factory Data Reset
546	546
547		-=== 3.3.4 Set Humidity Alarm Threshold ===
	536	+AT+PWORD  : Serial Access Password
548	548
	538	+AT+LDATA  : Get the last upload data
549	549
550		-* (% style="color:blue" %)**AT Command:**
	540	+AT+CDP  : Read or Clear cached data
551	551
552		-(% style="color:#037691" %)**AT+SHHUM=min,max**
553	553
554		-* When min=0, and max≠0, Alarm higher than max
555		-* When min≠0, and max=0, Alarm lower than min
556		-* When min≠0 and max≠0, Alarm higher than max or lower than min
557		-
558		-Example:
559		-
560		- AT+SHHUM=70,0  ~/~/ Alarm when humidity lower than 70%.
561		-
562		-* (% style="color:blue" %)**Downlink Payload:**
563		-
564		-(% style="color:#037691" %)**0x(0C 02 46 00)**(%%)  ~/~/ Set AT+SHTHUM=70,0
565		-
566		-(% style="color:red" %)**(note: 3^^rd^^ byte= 0x46 for low limit (70%), 4^^th^^ byte = 0x00 for high limit (not set))**
567		-
568		-
569		-=== 3.3.5 Set Alarm Interval ===
570		-
571		-
572		-The shortest time of two Alarm packet. (unit: min)
573		-
574		-* (% style="color:blue" %)**AT Command:**
575		-
576		-(% style="color:#037691" %)**AT+ATDC=30** (%%) ~/~/ The shortest interval of two Alarm packets is 30 minutes, Means is there is an alarm packet uplink, there won't be another one in the next 30 minutes.
577		-
578		-* (% style="color:blue" %)**Downlink Payload:**
579		-
580		-(% style="color:#037691" %)**0x(0D 00 1E)**(%%)     **~-~--> ** Set AT+ATDC=0x 00 1E = 30 minutes
581		-
582		-
583		-=== 3.3.6 Get Alarm settings ===
584		-
585		-
586		-Send a LoRaWAN downlink to ask device send Alarm settings.
587		-
588		-* (% style="color:#037691" %)**Downlink Payload:  **(%%)0x0E 01
589		-
590		-**Example:**
591		-
592		-[[image:image-20230524110211-4.png]]
593		-
594		-**Explain:**
595		-
596		-* Alarm & MOD bit is 0x7C, 0x7C >> 2 = 0x31: Means this message is the Alarm settings message.
597		-
598		-=== 3.3.7 Set Interrupt Mode ===
599		-
600		-
601		-Feature, Set Interrupt mode for PA8 of pin.
602		-
603		-When AT+INTMOD=0 is set, PA8 is used as a digital input port.
604		-
605		-(% style="color:blue" %)**AT Command: AT+INTMOD**
606		-
607		-(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
608		-|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 197px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Response**
609		-|(% style="width:154px" %)AT+INTMOD=?|(% style="width:196px" %)Show current interrupt mode|(% style="width:157px" %)(((
610		-0
611		-OK
612		-the mode is 0 =Disable Interrupt
613		-)))
614		-|(% style="width:154px" %)AT+INTMOD=2|(% style="width:196px" %)(((
615		-Set Transmit Interval
616		-0. (Disable Interrupt),
617		-~1. (Trigger by rising and falling edge)
618		-2. (Trigger by falling edge)
619		-3. (Trigger by rising edge)
620		-)))|(% style="width:157px" %)OK
621		-
622		-(% style="color:blue" %)**Downlink Command: 0x06**
623		-
624		-Format: Command Code (0x06) followed by 3 bytes.
625		-
626		-This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
627		-
628		-* Example 1: Downlink Payload: 06000000  ~/~/  Turn off interrupt mode
629		-* Example 2: Downlink Payload: 06000003  ~/~/  Set the interrupt mode to rising edge trigger
630		-
631		-=== 3.3.8 Set Power Output Duration ===
632		-
633		-
634		-Control the output duration 5V . Before each sampling, device will
635		-
636		-~1. first enable the power output to external sensor,
637		-
638		-2. keep it on as per duration, read sensor value and construct uplink payload
639		-
640		-3. final, close the power output.
641		-
642		-(% style="color:blue" %)**AT Command: AT+5VT**
643		-
644		-(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
645		-|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 197px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Response**
646		-|(% style="width:154px" %)AT+5VT=?|(% style="width:196px" %)Show 5V open time.|(% style="width:157px" %)0 (default)
647		-OK
648		-|(% style="width:154px" %)AT+5VT=1000|(% style="width:196px" %)Close after a delay of 1000 milliseconds.|(% style="width:157px" %)OK
649		-
650		-(% style="color:blue" %)**Downlink Command: 0x07**
651		-
652		-Format: Command Code (0x07) followed by 2 bytes.
653		-
654		-The first and second bytes are the time to turn on.
655		-
656		-* Example 1: Downlink Payload: 070000  **~-~-->**  AT+5VT=0
657		-* Example 2: Downlink Payload: 0701F4  **~-~-->**  AT+5VT=500
658		-
659	659	= 4. Battery & Power Consumption =
660	660
661	661
662		-S31x-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
	546	+S31x-NB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
663	663
664	664	[[**Battery Info & Power Consumption Analyze**>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
665	665
666	666
667		-= 5. OTA Firmware update =
	551	+= 5. Firmware update =
668	668
669	669
670		-(% class="wikigeneratedid" %)
671		-User can change firmware S31x-LB to:
	554	+User can change device firmware to::
672	672
673		-* Change Frequency band/ region.
674	674	* Update with new features.
	557	+
675	675	* Fix bugs.
676	676
677	677	Firmware and changelog can be downloaded from : **[[Firmware download link>>https://www.dropbox.com/sh/fis3g6nmhv0eokg/AAC6BcCZaX4BdqZkduUvZ3jIa?dl=0]]**
678	678
679		-
680	680	Methods to Update Firmware:
681	681
682		-* (Recommanded way) OTA firmware update via wireless : **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]**
	564	+* (Recommended way) OTA firmware update via BLE: [[**Instruction**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/BLE_Firmware_Update_NB_Sensors_BC660K-GL/]].
683	683	* Update through UART TTL interface : **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
684	684
685	685	= 6. FAQ =