Changes for page wiki_test

Last modified by Mengting Qiu on 2024/09/05 17:35

From 82.33 to 82.34 From 84.17 to 84.18

From version 82.34

edited by Xiaoling
on 2023/09/11 13:41

Change comment: Update document after refactoring.

To version 84.17

edited by Xiaoling
on 2023/09/11 15:46

Change comment: There is no comment for this version

Raw
Rendered

Summary

Page properties (2 modified, 0 added, 0 removed)
Attachments (0 modified, 2 added, 0 removed)
- image-20230911134259-1.png
- image-20230911140426-2.png

Details

Page properties

Title

@@ -1,1 +1,1 @@
--DDS20-NB_NB-IoT_Ultrasonic_Liquid_Level_Sensor_User_Manual
++DDS20-NB -- NB-IoT Ultrasonic Liquid Level Sensor User Manual

Content

@@ -1,8 +1,7 @@
  (% style="text-align:center" %)
--[[image:image-20230819102136-3.png]]
++[[image:image-20230911134259-1.png||height="570" width="570"]]
--
  **Table of Contents:**
  {{toc/}}
@@ -14,61 +14,52 @@
  = 1. Introduction =
--== 1.1 What is S31x-NB NB-IoT Temperature & Humidity Sensor ==
++== 1.1 What is DDS20-NB NB-IoT Ultrasonic liquid level Sensor ==
--The Dragino S31-NB and S31B-NB are (% style="color:blue" %)**NB-IoT Temperature and Humidity Sensor**(%%) for Internet of Things solution. It is used to measure the surrounding (% style="color:blue" %)**environment temperature and relative air humidity precisely**(%%), and then upload to IoT server via NB-IoT network*.
++The Dragino DDS20-NB is a (% style="color:blue" %)**NB-IoT Ultrasonic liquid level sensor**(%%) for Internet of Things solution. It uses (% style="color:blue" %)**none-contact method **(%%)to measure the (% style="color:blue" %)**height of liquid**(%%) in a container without opening the container, and send IoT platform via NB-IoT network.
--The temperature & humidity sensor used in S31-NB is SHT31, which is fully calibrated, linearized, and temperature compensated digital output from Sensirion, it provides a strong reliability and long-term stability. The SHT31 is fixed in a (% style="color:blue" %)**waterproof anti-condensation casing**(%%) for long term use.
++The DDS20-NB sensor is installed directly below the container to detect the height of the liquid level. User doesn't need to open a hole on the container to be tested. The none-contact measurement makes the measurement safety, easier and possible for some strict situation.
--S31-NB supports different uplink methods include (% style="color:blue" %)**TCP, MQTT, UDP**(%%) for different application requirement. and Support Uplinks to various IoT Servers.
++DDS20-NB uses (% style="color:blue" %)**ultrasonic sensing technology**(%%) for distance measurement. DDS20-NB is of high accuracy to measure various liquid such as: (% style="color:blue" %)**toxic substances**, **strong acids**, **strong alkalis**(%%) and (% style="color:blue" %)**various pure liquids**(%%) in high-temperature and high-pressure airtight containers.
--S31-NB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), It is designed for long term use up to several years. (Real-world battery life depends on the use environment, update period and uplink method. Please check related Power Analyze report).
++DDS20-NB supports different uplink methods including (% style="color:blue" %)**MQTT, MQTTs, UDP & TCP**(%%) for different application requirement, and support uplinks to various IoT Servers.
--*make sure you have NB-IoT coverage locally.
++DDS20-NB (% style="color:blue" %)**supports BLE configure **(%%)and(% style="color:blue" %)** OTA update**(%%) which make user easy to use.
++DDS20-NB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long-term use up to severa years.
--[[image:1692411831805-116.png]]
++DDS20-NB has optional built-in SIM card and default IoT server connection version. Which makes it works with simple configuration.
++[[image:image-20230911140426-2.png||height="320" width="951"]]
++
++
  == 1.2 Features ==
  * NB-IoT Bands: B1/B2/B3/B4/B5/B8/B12/B13/B17/B18/B19/B20/B25/B28/B66/B70/B85 @H-FDD
  * Ultra-low power consumption
--* External 3 meters SHT31 probe (For S31-NB)
--* Measure range -40°C ~~ 85°C
--* Temperature & Humidity alarm
++* Liquid Level Measurement by Ultrasonic technology
++* Measure through container, No need to contact Liquid
++* Valid level range 20mm - 2000mm
++* Accuracy: ±(5mm+S*0.5%) (S: Measure Value)
  * Multiply Sampling and one uplink
  * Support Bluetooth v5.1 remote configure and update firmware
  * Uplink on periodically
  * Downlink to change configure
++* IP66 Waterproof Enclosure
  * 8500mAh Battery for long term use
  * Nano SIM card slot for NB-IoT SIM
--
  == 1.3 Specification ==
  (% style="color:blue" %)**Common DC Characteristics:**
--* Supply Voltage: 2.1v ~~ 3.6v
++* Supply Voltage: 2.5v ~~ 3.6v
  * Operating Temperature: -40 ~~ 85°C
--(% style="color:blue" %)**Temperature Sensor:**
--
--* Range: -40 to + 80°C
--* Accuracy: ±0.2 @ 0-90 °C
--* Resolution: 0.1°C
--* Long Term Shift: <0.03 °C/yr
--
--(% style="color:blue" %)**Humidity Sensor: **
--
--* Range: 0 ~~ 99.9% RH
--* Accuracy: ± 2%RH ( 0 ~~ 100%RH)
--* Resolution: 0.01% RH
--* Long Term Shift: <0.25 %RH/yr
--
  (% style="color:blue" %)**NB-IoT Spec:**
  (% style="color:#037691" %)**NB-IoT Module: BC660K-GL**
@@ -106,27 +106,144 @@
  * STOP Mode: 10uA @ 3.3v
  * Max transmit power: 350mA@3.3v
++== 1.4 Suitable Container & Liquid ==
--== 1.4 Applications ==
++* Solid Wall container such as: steel, iron, glass, ceramics, non-foaming plastics etc.
++* Container shape is regular, and surface is smooth.
++* Container Thickness:
++** Pure metal material.  2~~8mm, best is 3~~5mm
++** Pure non metal material: <10 mm
++* Pure liquid without irregular deposition.
--* Smart Buildings & Home Automation
--* Logistics and Supply Chain Management
--* Smart Metering
--* Smart Agriculture
--* Smart Cities
--* Smart Factory
++(% style="display:none" %)
++== 1.5 Install DDS20-NB ==
--== 1.5 Sleep mode and working mode ==
++(% style="color:blue" %)**Step 1**(%%):  ** Choose the installation point.**
++DDS20-NB (% style="color:red" %)**MUST**(%%) be installed on the container bottom middle position.
++
++[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS20%20-%20LoRaWAN%20Liquid%20Level%20Sensor%20User%20Manual/WebHome/image-20220615091045-3.png?rev=1.1||alt="image-20220615091045-3.png"]]
++
++
++(((
++(% style="color:blue" %)**Step 2**(%%):   **Polish the installation point.**
++)))
++
++(((
++For Metal Surface with paint, it is important to polish the surface, first use crude sand paper to polish the paint level , then use exquisite sand paper to polish the metal level to make it shine & smooth.
++)))
++
++[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/DDS20-LB_LoRaWAN_Ultrasonic_Liquid_Level_Sensor_User_Manual/WebHome/image-20230613143052-5.png?rev=1.1||alt="image-20230613143052-5.png"]]
++
++
++No polish needed if the container is shine metal surface without paint or non-metal container.
++
++[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/DDS20-LB_LoRaWAN_Ultrasonic_Liquid_Level_Sensor_User_Manual/WebHome/image-20230613143125-6.png?rev=1.1||alt="image-20230613143125-6.png"]]
++
++
++(((
++(% style="color:blue" %)**Step3:   **(%%)**Test the installation point.**
++)))
++
++(((
++Power on DDS20-NB, check if the blue LED is on, If the blue LED is on, means the sensor works. Then put ultrasonic coupling paste on the sensor and put it tightly on the installation point.
++)))
++
++(((
++It is necessary to put the coupling paste between the sensor and the container, otherwise DDS20-NB won't detect the liquid level.
++)))
++
++(((
++After paste the DDS20-NB well, power on DDS20-NB. In the first 30 seconds of booting, device will check the sensors status and BLUE LED will show the status as below. After 30 seconds, BLUE LED will be off to save battery life.
++)))
++
++
++(((
++(% style="color:blue" %)**LED Status:**
++)))
++
++* (((
++**Onboard LED**: When power on device, the onboard LED will fast blink 4 times which means detect the sensor well.
++)))
++
++* (((
++(% style="color:blue" %)**BLUE LED**(% style="color:red" %)** always ON**(%%): Sensor is power on but doesn't detect liquid. There is problem in installation point.
++)))
++* (((
++(% style="color:blue" %)**BLUE LED**(% style="color:red" %)** slowly blinking**(%%): Sensor detects Liquid Level, The installation point is good.
++)))
++
++(((
++DDS20-NB will enter into low power mode at 30 seconds after system reset or power on, Blue LED will be off after that.
++)))
++
++
++(((
++(% style="color:red" %)**Note :**(%%)** (% style="color:blue" %)Ultrasonic coupling paste(%%)**(% style="color:blue" %) (%%) is subjected in most shipping way. So the default package doesn't include it and user needs to purchase locally.
++)))
++
++
++(((
++(% style="color:blue" %)**Step4:   **(%%)**Install use Epoxy ab glue.**
++)))
++
++(((
++Prepare Eproxy AB glue.
++)))
++
++(((
++Put Eproxy AB glue in the sensor and press it hard on the container installation point.
++)))
++
++(((
++Reset DDS20-NB and see if the BLUE LED is slowly blinking.
++)))
++
++[[image:image-20230809172509-1.png]]
++
++(((
++(% style="color:red" %)**Note :**(% style="color:red; display:none" %)** **
++
++(% style="color:red" %)**1:**(%%)** (% style="color:blue" %)Eproxy AB glue(%%)** needs 3~~ 5 minutes to stable attached. we can use other glue material to keep it in the position.
++)))
++
++(((
++(% style="color:red" %)**2:**(%%)** (% style="color:blue" %)Eproxy AB glue(%%)** is subjected in most shipping way. So the default package doesn't include it and user needs to purchase locally.
++)))
++
++
++== 1.6 Applications ==
++
++
++* Smart liquid control solution
++
++* Smart liquefied gas solution
++
++== 1.7 Precautions ==
++
++
++* At room temperature, containers of different materials, such as steel, glass, iron, ceramics, non-foamed plastics and other dense materials, have different detection blind areas and detection limit heights.
++
++* For containers of the same material at room temperature, the detection blind zone and detection limit height are also different for the thickness of the container.
++
++* When the detected liquid level exceeds the effective detection value of the sensor, and the liquid level of the liquid to be measured shakes or tilts, the detected liquid height is unstable.
++
++(% style="display:none" %)
++
++
++
++== 1.8 Sleep mode and working mode ==
++
++
  (% style="color:blue" %)**Deep Sleep Mode: **(%%)Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.
  (% style="color:blue" %)**Working Mode:** (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
--== 1.6 Button & LEDs ==
++== 1.9 Button & LEDs ==
  [[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675071855856-879.png]]
@@ -145,13 +145,12 @@
  )))
  |(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means device is in Deep Sleep Mode.
++== 1.10 BLE connection ==
--== 1.7 BLE connection ==
++DDS20-NB support BLE remote configure and firmware update.
--S31x-NB support BLE remote configure and firmware update.
--
  BLE can be used to configure the parameter of sensor or see the console output from sensor. BLE will be only activate on below case:
  * Press button to send an uplink
@@ -161,21 +161,19 @@
  If there is no activity connection on BLE in 60 seconds, sensor will shut down BLE module to enter low power mode.
--== 1.8 Pin Definitions & Switch ==
++== 1.11 Pin Definitions & Switch ==
--S31x-NB use the mother board from S31-NB which as below.
--
  [[image:image-20230819104805-5.png]]
--=== 1.8.1 Jumper JP2 ===
++=== 1.11.1 Jumper JP2 ===
  Power on Device when put this jumper.
--=== 1.8.2 BOOT MODE / SW1 ===
++=== 1.11.2 BOOT MODE / SW1 ===
  **1)** (% style="color:blue" %)**ISP**(%%): upgrade mode, device won't have any signal in this mode. but ready for upgrade firmware. LED won't work. Firmware won't run.
@@ -183,61 +183,48 @@
  **2)** (% style="color:blue" %)**Flash**(%%): work mode, device starts to work and send out console output for further debug
--=== 1.8.3 Reset Button ===
++=== 1.11.3 Reset Button ===
  Press to reboot the device.
++(% style="display:none" %)
--== 1.9 Hardware Variant ==
++== 1.12 Mechanical ==
--(% border="1" cellspacing="5" style="width:410px" %)
--|=(% style="width: 102px;background-color:#4F81BD;color:white" %)Model|=(% style="width: 126px; background-color:#4F81BD;color:white" %)Photo|=(% style="width: 179px;background-color:#4F81BD;color:white" %)Probe Info
--|(% style="width:102px" %)(((
--S31-NB
--)))|(% style="width:126px" %)(((
--(% style="text-align:center" %)
--[[image:image-20230819110632-6.png||height="130" width="104"]]
--)))|(% style="width:179px" %)(((
--1 x SHT31 Probe
--Cable Length : 3 meters
++[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual/WebHome/1675143884058-338.png?rev=1.1||alt="1675143884058-338.png"]]
--
--)))
--|(% style="width:102px" %)(((
--S31B-NB
--)))|(% style="width:126px" %)(((
--(% style="text-align:center" %)
--[[image:image-20230819110702-7.png||height="164" width="90"]]
--)))|(% style="width:179px" %)(((
--1 x SHT31 Probe
++[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual/WebHome/1675143899218-599.png?rev=1.1||alt="1675143899218-599.png"]]
--Installed in device.
--)))
++[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual/WebHome/1675143909447-639.png?rev=1.1||alt="1675143909447-639.png"]]
--(% style="display:none" %)
++(% style="color:blue" %)**Probe Mechanical:**
++[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS20%20-%20LoRaWAN%20Liquid%20Level%20Sensor%20User%20Manual/WebHome/image-20220615090910-1.png?rev=1.1||alt="image-20220615090910-1.png"]]
--= 2. Use S31-NB to communicate with IoT Server =
++[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS20%20-%20LoRaWAN%20Liquid%20Level%20Sensor%20User%20Manual/WebHome/image-20220615090910-2.png?rev=1.1||alt="image-20220615090910-2.png"]]
++
++= 2. Use DDS20-NB to communicate with IoT Server =
++
  == 2.1 Send data to IoT server via NB-IoT network ==
--The S31-NB is equipped with a NB-IoT module, the pre-loaded firmware in S31-NB will get environment data from sensors and send the value to local NB-IoT network via the NB-IoT module.  The NB-IoT network will forward this value to IoT server via the protocol defined by S31-NB.
++The DDS20-NB is equipped with a NB-IoT module, the pre-loaded firmware in DDS20-NB will get environment data from sensors and send the value to local NB-IoT network via the NB-IoT module.  The NB-IoT network will forward this value to IoT server via the protocol defined by DDS20-NB.
  Below shows the network structure:
--[[image:1692415924540-357.png]]
++[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/DDS20-NB_NB-IoT_Ultrasonic_Liquid_Level_Sensor_User_Manual/WebHome/image-20230911140426-2.png?width=951&height=320&rev=1.1||alt="image-20230911140426-2.png"]]
--There are two version: (% style="color:blue" %)**-GE**(%%) and (% style="color:blue" %)**-1D**(%%) version of S31-NB.
++There are two version: (% style="color:blue" %)**-GE**(%%) and (% style="color:blue" %)**-1D**(%%) version of DDS20-NB.
--(% style="color:blue" %)**GE Version**(%%): This version doesn't include SIM card or point to any IoT server. User needs to use AT Commands to configure below two steps to set S31-NB send data to IoT server.
++(% style="color:blue" %)**GE Version**(%%): This version doesn't include SIM card or point to any IoT server. User needs to use AT Commands to configure below two steps to set DDS20-NB send data to IoT server.
  * Install NB-IoT SIM card and configure APN. See instruction of [[Attach Network>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H2.AttachNetwork]].
@@ -267,13 +267,13 @@
  [[image:image-20230819113244-11.png||height="141" width="367"]]
  )))|(% style="width:170px" %)
--(% style="color:blue" %)**1D Version**(%%): This version has 1NCE SIM card pre-installed and configure to send value to DataCake. User Just need to select the sensor type in DataCake and Activate S31-NB and user will be able to see data in DataCake. See here for [[DataCake Config Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.4Datacake]].
++(% style="color:blue" %)**1D Version**(%%): This version has 1NCE SIM card pre-installed and configure to send value to DataCake. User Just need to select the sensor type in DataCake and Activate DDS20-NB and user will be able to see data in DataCake. See here for [[DataCake Config Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.4Datacake]].
  == 2.2 Payload Types ==
--To meet different server requirement, S31-NB supports different payload type.
++To meet different server requirement, DDS20-NB supports different payload type.
  **Includes:**
@@ -299,7 +299,7 @@
  This is the General Json Format. As below:
--(% style="color:#4472c4" %)**{"IMEI":866207053462762,"temperature":29.2,"humidity":54.2,"battery":3.27,"signal":24,"Model":S31x-NB, "1":{28.2,48.3,2023/08/10 08:00:37},"2":{28.1,49.1,2023/08/10 07:57:37},"3":{28.1,48.5,2023/08/10 07:54:37},"4":{28.2,48.6,2023/08/10 07:51:37},"5":{28.1,48.9,2023/08/10 07:48:37},"6":{28.2,48.8,2023/08/10 07:45:37},"7":{28.2,48.8,2023/08/10 07:42:37},"8":{28.0,48.8,2023/08/10 07:39:37}}**
++(% style="color:#4472c4" %)**{"IMEI":866207053462762,"temperature":29.2,"humidity":54.2,"battery":3.27,"signal":24,"Model":DDS20-NB, "1":{28.2,48.3,2023/08/10 08:00:37},"2":{28.1,49.1,2023/08/10 07:57:37},"3":{28.1,48.5,2023/08/10 07:54:37},"4":{28.2,48.6,2023/08/10 07:51:37},"5":{28.1,48.9,2023/08/10 07:48:37},"6":{28.2,48.8,2023/08/10 07:45:37},"7":{28.2,48.8,2023/08/10 07:42:37},"8":{28.0,48.8,2023/08/10 07:39:37}}**
  (% style="color:red" %)**Notice, from above payload:**
@@ -308,7 +308,6 @@
  * Json entry 1 ~~ 8 are the last 1 ~~ 8 sampling data as specify by (% style="color:#037691" %)**AT+NOUD=8 ** (%%)Command. Each entry includes (from left to right): Temperature, Humidity, Sampling time.
--
  === 2.2.2 HEX format Payload(Type~=0) ===
@@ -323,7 +323,7 @@
  These bytes include the hardware and software version.
--(% style="color:#037691" %)**Higher byte:**(%%) Specify Sensor Model: 0x00 for S31B-NB & S31-NB
++(% style="color:#037691" %)**Higher byte:**(%%) Specify Sensor Model: 0x00 for DDS20-NB
  (% style="color:#037691" %)**Lower byte:**(%%) Specify the software version: 0x64=100, means firmware version 100
@@ -350,20 +350,6 @@
  **99**      Not known or not detectable
--(% style="color:blue" %)**Temperature: **
--
--If payload is: 0105H:  (0105 & 8000 == 0), temp = 0105H /10 = 26.1 degree
--
--If payload is: FF3FH :  (FF3F & 8000 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
--
--(FF3F & 8000: Judge whether the highest bit is 1, when the highest bit is 1, it is negative)
--
--
--(% style="color:blue" %)**Humidity:   **
--
--Read:0295(H)=661(D)    Value:  661 / 10=66.1, So 66.1%
--
--
  (% style="color:blue" %)**TimeStamp:   **
  Unit TimeStamp Example: 64d49439(H) = 1691653177(D)
@@ -390,62 +390,193 @@
  (% style="color:#4472c4" %)**field1=27.9&field2=49.9&field3=3.23&field4=28**
++== 2.3  Uplink Payload ==
--== 2.3 Test Uplink and Change Update Interval ==
++(((
++DDS20-LB will uplink payload via LoRaWAN with below payload format:
++)))
--By default, Sensor will send uplinks (% style="color:blue" %)**every 2 hours**(%%) & AT+NOUD=8
++(((
++Uplink payload includes in total 8 bytes.
++)))
--User can use below commands to change the (% style="color:blue" %)**uplink interval**.
++(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
++|=(% style="width: 95px; background-color:#4F81BD;color:white" %)Size(bytes)|=(% style="width: 61px; background-color:#4F81BD;color:white" %)2|=(% style="background-color:#4F81BD;color:white" %)2|=(% style="background-color:#4F81BD;color:white" %)1|=(% style="background-color:#4F81BD;color:white" %)2|=(% style="background-color:#4F81BD;color:white" %)1
++|(% style="width:95px" %)Value|(% style="width:61px" %)[[BAT>>||anchor="H2.3.2A0BatteryInfo"]]|(((
++[[Distance>>||anchor="H2.3.3A0Distance"]]
++(unit: mm)
++)))|[[Digital Interrupt (Optional)>>||anchor="H2.3.4A0InterruptPin"]]|(((
++[[Temperature (Optional)>>||anchor="H2.3.5A0DS18B20Temperaturesensor"]]
++)))|[[Sensor Flag>>||anchor="H2.3.6A0SensorFlag"]]
--(% style="color:#037691" %)**AT+TDC=600 ** (%%)      ~/~/ Set Update Interval to 600s
++[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/DDS20-LB_LoRaWAN_Ultrasonic_Liquid_Level_Sensor_User_Manual/WebHome/%E5%BE%AE%E4%BF%A1%E6%88%AA%E5%9B%BE_20230702135733.png?width=964&height=215&rev=1.1||alt="微信截图_20230702135733.png"]]
--User can also push the button for more than 1 seconds to activate an uplink.
++=== 2.3.1 Device Status, FPORT~=5 ===
--== 2.4 Multi-Samplings and One uplink ==
++(((
++Users can use the downlink command(**0x26 01**) to ask DDS20-LB to send device configure detail, include device configure status. DDS20-LB will uplink a payload via FPort=5 to server.
--To save battery life, S31-NB will sample temperature & humidity data every 15 minutes and send one uplink every 2 hours. So each uplink it will include 8 stored data + 1 real-time data. They are defined by:
++The Payload format is as below.
++)))
--* (% style="color:#037691" %)**AT+TR=900**   (%%)     ~/~/ The unit is seconds, and the default is to record data once every 900 seconds (15 minutes, the minimum can be set to 180 seconds)
++(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:490px" %)
++|=(% colspan="6" style="background-color:#4F81BD;color:white" %)Device Status (FPORT=5)
++|(% style="width:60px" %)**Size(bytes)**|(% style="width:80px" %)**1**|(% style="width:140px" %)**2**|(% style="width:140px" %)**1**|(% style="width:70px" %)**1**|(% style="width:70px" %)**2**
++|(% style="width:94px" %)**Value**|(% style="width:68px" %)Sensor Model|(% style="width:80px" %)Firmware Version|(% style="width:86px" %)Frequency Band|(% style="width:61px" %)Sub-band|(% style="width:61px" %)BAT
--* (% style="color:#037691" %)**AT+NOUD=8**     (%%)~/~/  The device uploads 8 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
++[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/DDS20-LB_LoRaWAN_Ultrasonic_Liquid_Level_Sensor_User_Manual/WebHome/DDS20.png?width=1336&height=241&rev=1.1||alt="DDS20.png"]]
--The diagram below explains the relationship between TR, NOUD, and TDC more clearly:
--[[image:1692424376354-959.png]]
++(% style="color:#037691" %)**Sensor Model**(%%)**:** For DDS20-LB, this value is 0x29
++(% style="color:#037691" %)**Firmware Version**(%%)**:** 0x0100, Means: v1.0.0 version
--== 2.5 Humidity and Temperature alarm function ==
++(% style="color:#037691" %)**Frequency Band**(%%)**:**
++0x01: EU868
--On each sampling define by AT+TR ( default 900s or 15 minutes), when the value exceed the range, it will trigger an Alarm and immediately sends a uplink.
++0x02: US915
++0x03: IN865
--(% style="color:blue" %)**AT Commands:**
++0x04: AU915
--(% style="color:#037691" %)**AT+ SHHUM=min,max**
++0x05: KZ865
--Example: AT+ SHHUM=50,80     ~/~/ Alarm when humidity lower than 50 or higher than 80.
++0x06: RU864
++0x07: AS923
--(% style="color:#037691" %)**AT+ SHTEMP=min,max**
++0x08: AS923-1
--Example: AT+ SHTEMP=20,30   ~/~/ Alarm when temperature lower than 20 or higher than 30
++0x09: AS923-2
++0x0a: AS923-3
--(% style="color:red" %)**Notice:**
++0x0b: CN470
--* To disable Alarm, user can set min and max to same value , such as (% style="color:#037691" %)**AT+SHTEMP=0,0.**
++0x0c: EU433
--* If user only want to send only min or max, user can set the alarm to a value that device won’t reach. For example: (% style="color:#037691" %)**AT+SHTEMP=-80,0.**
++0x0d: KR920
++0x0e: MA869
++
++(% style="color:#037691" %)**Sub-Band**(%%)**:**
++
++AU915 and US915: value 0x00 ~~ 0x08
++
++CN470: value 0x0B ~~ 0x0C
++
++Other Bands: Always 0x00
++
++
++(% style="color:#037691" %)**Battery Info:**
++
++Check the battery voltage.
++
++Ex1: 0x0B45 = 2885mV
++
++Ex2: 0x0B49 = 2889mV
++
++
++=== 2.3.2  Battery Info ===
++
++
++Check the battery voltage for DDS20-LB.
++
++Ex1: 0x0B45 = 2885mV
++
++Ex2: 0x0B49 = 2889mV
++
++
++=== 2.3.3  Distance ===
++
++
++(((
++Get the distance. Flat object range 20mm - 2000mm.
++)))
++
++(((
++For example, if the data you get from the register is **0x06 0x05**, the distance between the sensor and the measured object is(% style="color:#4472c4" %)** **
++
++(% style="color:blue" %)**0605(H) = 1541 (D) = 1541 mm.**
++)))
++
++* If the sensor value is 0x0000, it means system doesn't detect ultrasonic sensor.
++
++* If the sensor value lower than 0x0014 (20mm), the sensor value will be invalid.
++
++=== 2.3.4  Interrupt Pin ===
++
++
++This data field shows if this packet is generated by interrupt or not.
++
++**Example:**
++
++0x00: Normal uplink packet.
++
++0x01: Interrupt Uplink Packet.
++
++
++=== 2.3.5  DS18B20 Temperature sensor ===
++
++
++This is optional, user can connect external DS18B20 sensor to the +3.3v, 1-wire and GND pin . and this field will report temperature.
++
++**Example**:
++
++If payload is: 0105H:  (0105 & FC00 == 0), temp = 0105H /10 = 26.1 degree
++
++If payload is: FF3FH :  (FF3F & FC00 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
++
++
++=== 2.3.6  Sensor Flag ===
++
++
++(((
++0x01: Detect Ultrasonic Sensor
++)))
++
++(((
++0x00: No Ultrasonic Sensor
++
++
++)))
++
++== 2.4 Test Uplink and Change Update Interval ==
++
++
++By default, Sensor will send uplinks (% style="color:blue" %)**every 2 hours**(%%) & AT+NOUD=8
++
++User can use below commands to change the (% style="color:blue" %)**uplink interval**.
++
++(% style="color:#037691" %)**AT+TDC=600 ** (%%)      ~/~/ Set Update Interval to 600s
++
++User can also push the button for more than 1 seconds to activate an uplink.
++
++
++== 2.5 Multi-Samplings and One uplink ==
++
++
++To save battery life, DDS20-NB will sample temperature & humidity data every 15 minutes and send one uplink every 2 hours. So each uplink it will include 8 stored data + 1 real-time data. They are defined by:
++
++* (% style="color:#037691" %)**AT+TR=900**   (%%)     ~/~/ The unit is seconds, and the default is to record data once every 900 seconds (15 minutes, the minimum can be set to 180 seconds)
++
++* (% style="color:#037691" %)**AT+NOUD=8**     (%%)~/~/  The device uploads 8 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
++
++The diagram below explains the relationship between TR, NOUD, and TDC more clearly:
++
++[[image:1692424376354-959.png]]
++
++
  == 2.6 Trggier an uplink by external interrupt ==
--S31-NB has an external trigger interrupt function. Users can use the PB15 pin to trigger the upload of data packets.
++DDS20-NB has an external trigger interrupt function. Users can use the PB15 pin to trigger the upload of data packets.
  (% style="color:blue" %)**AT command:**
@@ -460,18 +460,17 @@
  * (% style="color:#037691" %)**AT+INTMOD=3  **(%%)  ~/~/ Trigger by rising edge
--= 3. Configure S31x-NB =
++= 3. Configure DDS20-NB =
  == 3.1 Configure Methods ==
--S31x-NB supports below configure method:
++DDS20-NB supports below configure method:
  * AT Command via Bluetooth Connection (**Recommended**): [[BLE Configure Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
  * AT Command via UART Connection : See [[UART Connection>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H2.3UARTConnectionforSN50v3basemotherboard]].
--
  == 3.2 AT Commands Set ==
@@ -555,7 +555,7 @@
  = 4. Battery & Power Consumption =
--S31x-NB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
++DDS20-NB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
  [[**Battery Info & Power Consumption Analyze**>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
@@ -577,7 +577,6 @@
  * Update through UART TTL interface : **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
--
  = 6. FAQ =
  == 6.1 How can I access t BC660K-GL AT Commands? ==
@@ -588,11 +588,22 @@
  [[See BC660K-GL AT Command set>>url:https://www.dropbox.com/sh/5f6ssda5fum8rvs/AABT68l8ZzWOvZ5eg2qwOoFda?dl=0]]
--= 7. Order Info =
++= 7.  Trouble Shooting =
++== 7.1  Why i always see 0x0000 or 0 for the distance value? ==
--Part Number: (% style="color:blue" %)**S31-NB-XX  / S31B-NB-XX**
++(((
++DDS20-LB has a strict [[**installation requirement**>>||anchor="1.5A0InstallDDS20-LB"]]. Please make sure the installation method exactly follows up with the installation requirement. Otherwise, the reading might be always 0x00.
++
++If you have followed the instruction requirement exactly but still see the 0x00 reading issue, please. please double-check the decoder, you can check the raw payload to verify.
++)))
++
++= 8. Order Info =
++
++
++Part Number: (% style="color:blue" %)**DDS20-NB-XX**
++
  (% style="color:red" %)**XX**(%%):
  * (% style="color:#037691" %)**GE**(%%): General version ( Exclude SIM card)
@@ -602,12 +602,12 @@
  (% style="color:#037691" %)**1NCE SIM Card NB-IoT network coverage**(%%): Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Finland, Germany, Great Britain, Greece, Hungary, Ireland, Italy, Latvia, Malta, Netherlands, Norway, Puerto Rico, Russia, Slovak , Republic, Slovenia, Spain, Sweden, Switzerland, Taiwan, USA, US Virgin Islands
--= 8. Packing Info =
++= 9. Packing Info =
  (% style="color:#037691" %)**Package Includes**:
--* S31-NB or S31-NB NB-IoT Sensor Node x 1
++* DDS20-NB NB-IoT Ultrasonic liquid level sensor x 1
  * External antenna x 1
@@ -621,10 +621,9 @@
  * Weight / pcs : 180g
++= 10. Support =
--= 9. Support =
--
  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[Support@dragino.cc>>mailto:Support@dragino.cc]].

image-20230911134259-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+236.5 KB

Content

image-20230911140426-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+121.6 KB

Content