Skip to Content

Changes for page wiki_test

Last modified by Mengting Qiu on 2024/09/05 17:35
From version 82.27
edited by Xiaoling
on 2023/08/19 14:59
Change comment: There is no comment for this version
To version 84.5
edited by Xiaoling
on 2023/09/11 14:34
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -S31-NB/S31B-NB_BN-IoT Outdoor Temperature & Humidity Sensor User Manual
1 +DDS20-NB -- NB-IoT Ultrasonic Liquid Level Sensor User Manual
Content
... ... @@ -1,8 +1,7 @@
1 1  (% style="text-align:center" %)
2 -[[image:image-20230819102136-3.png]]
2 +[[image:image-20230911134259-1.png||height="570" width="570"]]
3 3  
4 4  
5 -
6 6  **Table of Contents:**
7 7  
8 8  {{toc/}}
... ... @@ -14,35 +14,41 @@
14 14  
15 15  = 1. Introduction =
16 16  
17 -== 1.1 What is S31x-NB NB-IoT Temperature & Humidity Sensor ==
16 +== 1.1 What is DDS20-NB NB-IoT Ultrasonic liquid level Sensor ==
18 18  
19 19  
20 -The Dragino S31-NB and S31B-NB are (% style="color:blue" %)**NB-IoT Temperature and Humidity Sensor**(%%) for Internet of Things solution. It is used to measure the surrounding (% style="color:blue" %)**environment temperature and relative air humidity precisely**(%%), and then upload to IoT server via NB-IoT network*.
19 +The Dragino DDS20-NB is a **NB-IoT Ultrasonic liquid level sensor** for Internet of Things solution. It uses **none-contact method **to measure the **height of liquid** in a container without opening the container, and send IoT platform via NB-IoT network.
21 21  
22 -The temperature & humidity sensor used in S31-NB is SHT31, which is fully calibrated, linearized, and temperature compensated digital output from Sensirion, it provides a strong reliability and long-term stability. The SHT31 is fixed in a (% style="color:blue" %)**waterproof anti-condensation casing**(%%) for long term use.
21 +The DDS20-NB sensor is installed directly below the container to detect the height of the liquid level. User doesn't need to open a hole on the container to be tested. The none-contact measurement makes the measurement safety, easier and possible for some strict situation. 
23 23  
24 -S31-NB supports different uplink methods include (% style="color:blue" %)**TCP, MQTT, UDP**(%%) for different application requirement. and Support Uplinks to various IoT Servers.
23 +DDS20-NB uses **ultrasonic sensing technology** for distance measurement. DDS20-NB is of high accuracy to measure various liquid such as: **toxic substances**, **strong acids**, **strong alkalis** and **various pure liquids** in high-temperature and high-pressure airtight containers.
25 25  
26 -S31-NB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), It is designed for long term use up to several years. (Real-world battery life depends on the use environment, update period and uplink method. Please check related Power Analyze report).
25 +PS-NB-NA supports different uplink methods including **MQTT, MQTTs, UDP & TCP** for different application requirement, and support uplinks to various IoT Servers.
27 27  
28 -*make sure you have NB-IoT coverage locally.
27 +PS-NB-NA **supports BLE configure **and** OTA update** which make user easy to use.
29 29  
29 +PS-NB-NA is powered by **8500mAh Li-SOCI2 battery**, it is designed for long-term use up to severa years.
30 30  
31 -[[image:1692411831805-116.png]]
31 +PS-NB-NA has optional built-in SIM card and default IoT server connection version. Which makes it works with simple configuration.
32 32  
33 33  
34 +[[image:image-20230911140426-2.png||height="320" width="951"]]
35 +
36 +
34 34  == 1.2 ​Features ==
35 35  
36 36  
37 37  * NB-IoT Bands: B1/B2/B3/B4/B5/B8/B12/B13/B17/B18/B19/B20/B25/B28/B66/B70/B85 @H-FDD
38 38  * Ultra-low power consumption
39 -* External 3 meters SHT31 probe (For S31-NB)
40 -* Measure range -40°C ~~ 85°C
41 -* Temperature & Humidity alarm
42 +* Liquid Level Measurement by Ultrasonic technology
43 +* Measure through container, No need to contact Liquid
44 +* Valid level range 20mm - 2000mm
45 +* Accuracy: ±(5mm+S*0.5%) (S: Measure Value)
42 42  * Multiply Sampling and one uplink
43 43  * Support Bluetooth v5.1 remote configure and update firmware
44 44  * Uplink on periodically
45 45  * Downlink to change configure
50 +* IP66 Waterproof Enclosure
46 46  * 8500mAh Battery for long term use
47 47  * Nano SIM card slot for NB-IoT SIM
48 48  
... ... @@ -49,31 +49,17 @@
49 49  == 1.3 Specification ==
50 50  
51 51  
52 -(% style="color:#037691" %)**Common DC Characteristics:**
57 +(% style="color:blue" %)**Common DC Characteristics:**
53 53  
54 -* Supply Voltage: 2.1v ~~ 3.6v
59 +* Supply Voltage: 2.5v ~~ 3.6v
55 55  * Operating Temperature: -40 ~~ 85°C
56 56  
57 -(% style="color:#037691" %)**Temperature Sensor:**
62 +(% style="color:blue" %)**NB-IoT Spec:**
58 58  
59 -* Range: -40 to + 80°C
60 -* Accuracy: ±0.2 @ 0-90 °C
61 -* Resolution: 0.1°C
62 -* Long Term Shift: <0.03 °C/yr
64 +(% style="color:#037691" %)**NB-IoT Module: BC660K-GL**
63 63  
64 -(% style="color:#037691" %)**Humidity Sensor: **
66 +(% style="color:#037691" %)**Support Bands:**
65 65  
66 -* Range: 0 ~~ 99.9% RH
67 -* Accuracy: ± 2%RH ( 0 ~~ 100%RH)
68 -* Resolution: 0.01% RH
69 -* Long Term Shift: <0.25 %RH/yr
70 -
71 -(% style="color:#037691" %)**NB-IoT Spec:**
72 -
73 -**NB-IoT Module: BC660K-GL**
74 -
75 -Support Bands:
76 -
77 77  * B1 @H-FDD: 2100MHz
78 78  * B2 @H-FDD: 1900MHz
79 79  * B3 @H-FDD: 1800MHz
... ... @@ -92,7 +92,7 @@
92 92  * B70 @H-FDD: 2000MHz
93 93  * B85 @H-FDD: 700MHz
94 94  
95 -(% style="color:#037691" %)**Battery:**
86 +(% style="color:blue" %)**Battery:**
96 96  
97 97  * Li/SOCI2 un-chargeable battery
98 98  * Capacity: 8500mAh
... ... @@ -100,33 +100,151 @@
100 100  * Max continuously current: 130mA
101 101  * Max boost current: 2A, 1 second
102 102  
103 -(% style="color:#037691" %)**Power Consumption**
94 +(% style="color:blue" %)**Power Consumption**
104 104  
105 105  * STOP Mode: 10uA @ 3.3v
106 106  * Max transmit power: 350mA@3.3v
107 107  
108 -== 1.4 Applications ==
99 +== 1.4 Suitable Container & Liquid ==
109 109  
110 110  
111 -* Smart Buildings & Home Automation
112 -* Logistics and Supply Chain Management
113 -* Smart Metering
114 -* Smart Agriculture
115 -* Smart Cities
116 -* Smart Factory
102 +* Solid Wall container such as: steel, iron, glass, ceramics, non-foaming plastics etc.
103 +* Container shape is regular, and surface is smooth.
104 +* Container Thickness:
105 +** Pure metal material.  2~~8mm, best is 3~~5mm
106 +** Pure non metal material: <10 mm
107 +* Pure liquid without irregular deposition.
117 117  
118 -== 1.5 Sleep mode and working mode ==
109 +(% style="display:none" %)
119 119  
111 +== 1.5 Install DDS20-NB ==
120 120  
113 +
114 +(% style="color:blue" %)**Step 1**(%%):  ** Choose the installation point.**
115 +
116 +DDS20-NB (% style="color:red" %)**MUST**(%%) be installed on the container bottom middle position.
117 +
118 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS20%20-%20LoRaWAN%20Liquid%20Level%20Sensor%20User%20Manual/WebHome/image-20220615091045-3.png?rev=1.1||alt="image-20220615091045-3.png"]]
119 +
120 +
121 +(((
122 +(% style="color:blue" %)**Step 2**(%%):  **Polish the installation point.**
123 +)))
124 +
125 +(((
126 +For Metal Surface with paint, it is important to polish the surface, first use crude sand paper to polish the paint level , then use exquisite sand paper to polish the metal level to make it shine & smooth.
127 +)))
128 +
129 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/DDS20-LB_LoRaWAN_Ultrasonic_Liquid_Level_Sensor_User_Manual/WebHome/image-20230613143052-5.png?rev=1.1||alt="image-20230613143052-5.png"]]
130 +
131 +
132 +No polish needed if the container is shine metal surface without paint or non-metal container.
133 +
134 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/DDS20-LB_LoRaWAN_Ultrasonic_Liquid_Level_Sensor_User_Manual/WebHome/image-20230613143125-6.png?rev=1.1||alt="image-20230613143125-6.png"]]
135 +
136 +
137 +(((
138 +(% style="color:blue" %)**Step3:   **(%%)**Test the installation point.**
139 +)))
140 +
141 +(((
142 +Power on DDS20-NB, check if the blue LED is on, If the blue LED is on, means the sensor works. Then put ultrasonic coupling paste on the sensor and put it tightly on the installation point.
143 +)))
144 +
145 +(((
146 +It is necessary to put the coupling paste between the sensor and the container, otherwise DDS20-NB won't detect the liquid level.
147 +)))
148 +
149 +(((
150 +After paste the DDS20-NB well, power on DDS20-NB. In the first 30 seconds of booting, device will check the sensors status and BLUE LED will show the status as below. After 30 seconds, BLUE LED will be off to save battery life.
151 +)))
152 +
153 +
154 +(((
155 +(% style="color:blue" %)**LED Status:**
156 +)))
157 +
158 +* (((
159 +**Onboard LED**: When power on device, the onboard LED will fast blink 4 times which means detect the sensor well.
160 +)))
161 +
162 +* (((
163 +(% style="color:blue" %)**BLUE LED**(% style="color:red" %)** always ON**(%%): Sensor is power on but doesn't detect liquid. There is problem in installation point.
164 +)))
165 +* (((
166 +(% style="color:blue" %)**BLUE LED**(% style="color:red" %)** slowly blinking**(%%): Sensor detects Liquid Level, The installation point is good.
167 +)))
168 +
169 +(((
170 +DDS20-NB will enter into low power mode at 30 seconds after system reset or power on, Blue LED will be off after that.
171 +)))
172 +
173 +
174 +(((
175 +(% style="color:red" %)**Note :**(%%)** (% style="color:blue" %)Ultrasonic coupling paste(%%)**(% style="color:blue" %) (%%) is subjected in most shipping way. So the default package doesn't include it and user needs to purchase locally.
176 +)))
177 +
178 +
179 +(((
180 +(% style="color:blue" %)**Step4:   **(%%)**Install use Epoxy ab glue.**
181 +)))
182 +
183 +(((
184 +Prepare Eproxy AB glue.
185 +)))
186 +
187 +(((
188 +Put Eproxy AB glue in the sensor and press it hard on the container installation point.
189 +)))
190 +
191 +(((
192 +Reset DDS20-NB and see if the BLUE LED is slowly blinking.
193 +)))
194 +
195 +[[image:image-20230809172509-1.png]]
196 +
197 +(((
198 +(% style="color:red" %)**Note :**(% style="color:red; display:none" %)** **
199 +
200 +(% style="color:red" %)**1:**(%%)** (% style="color:blue" %)Eproxy AB glue(%%)** needs 3~~ 5 minutes to stable attached. we can use other glue material to keep it in the position.
201 +)))
202 +
203 +(((
204 +(% style="color:red" %)**2:**(%%)** (% style="color:blue" %)Eproxy AB glue(%%)** is subjected in most shipping way. So the default package doesn't include it and user needs to purchase locally.
205 +)))
206 +
207 +
208 +== 1.6 Applications ==
209 +
210 +
211 +* Smart liquid control solution
212 +
213 +* Smart liquefied gas solution
214 +
215 +== 1.7 Precautions ==
216 +
217 +
218 +* At room temperature, containers of different materials, such as steel, glass, iron, ceramics, non-foamed plastics and other dense materials, have different detection blind areas and detection limit heights.
219 +
220 +* For containers of the same material at room temperature, the detection blind zone and detection limit height are also different for the thickness of the container.
221 +
222 +* When the detected liquid level exceeds the effective detection value of the sensor, and the liquid level of the liquid to be measured shakes or tilts, the detected liquid height is unstable.
223 +
224 +(% style="display:none" %)
225 +
226 +
227 +
228 +== 1.8 Sleep mode and working mode ==
229 +
230 +
121 121  (% style="color:blue" %)**Deep Sleep Mode: **(%%)Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.
122 122  
123 123  (% style="color:blue" %)**Working Mode:** (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
124 124  
125 125  
236 +== 1.9 Button & LEDs ==
126 126  
127 -== 1.6 Button & LEDs ==
128 128  
129 -
130 130  [[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675071855856-879.png]]
131 131  
132 132  
... ... @@ -143,10 +143,10 @@
143 143  )))
144 144  |(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means device is in Deep Sleep Mode.
145 145  
146 -== 1.7 BLE connection ==
255 +== 1.10 BLE connection ==
147 147  
148 148  
149 -S31x-NB support BLE remote configure and firmware update.
258 +DDS20-NB support BLE remote configure and firmware update.
150 150  
151 151  
152 152  BLE can be used to configure the parameter of sensor or see the console output from sensor. BLE will be only activate on below case:
... ... @@ -158,67 +158,34 @@
158 158  If there is no activity connection on BLE in 60 seconds, sensor will shut down BLE module to enter low power mode.
159 159  
160 160  
161 -== 1.8 Pin Definitions & Switch ==
270 +== 1.11 Pin Definitions & Switch ==
162 162  
163 163  
164 -S31x-NB use the mother board from S31-NB which as below.
165 -
166 166  [[image:image-20230819104805-5.png]]
167 167  
168 168  
169 -=== 1.8.1 Jumper JP2 ===
276 +=== 1.11.1 Jumper JP2 ===
170 170  
171 171  
172 172  Power on Device when put this jumper.
173 173  
174 174  
175 -=== 1.8.2 BOOT MODE / SW1 ===
282 +=== 1.11.2 BOOT MODE / SW1 ===
176 176  
177 177  
178 -1) (% style="color:blue" %)**ISP**(%%): upgrade mode, device won't have any signal in this mode. but ready for upgrade firmware. LED won't work. Firmware won't run.
285 +**1)** (% style="color:blue" %)**ISP**(%%): upgrade mode, device won't have any signal in this mode. but ready for upgrade firmware. LED won't work. Firmware won't run.
179 179  
180 -2) (% style="color:blue" %)**Flash**(%%): work mode, device starts to work and send out console output for further debug
287 +**2)** (% style="color:blue" %)**Flash**(%%): work mode, device starts to work and send out console output for further debug
181 181  
182 182  
183 -=== 1.8.3 Reset Button ===
290 +=== 1.11.3 Reset Button ===
184 184  
185 185  
186 186  Press to reboot the device.
187 187  
188 -
189 -== 1.9 Hardware Variant ==
190 -
191 -
192 -(% border="1" cellspacing="5" style="width:410px" %)
193 -|=(% style="width: 102px;background-color:#4F81BD;color:white" %)Model|=(% style="width: 126px; background-color:#4F81BD;color:white" %)Photo|=(% style="width: 179px;background-color:#4F81BD;color:white" %)Probe Info
194 -|(% style="width:102px" %)(((
195 -S31-NB
196 -)))|(% style="width:126px" %)(((
197 -(% style="text-align:center" %)
198 -[[image:image-20230819110632-6.png||height="130" width="104"]]
199 -)))|(% style="width:179px" %)(((
200 -1 x SHT31 Probe
201 -
202 -Cable Length : 3 meters
203 -
204 -
205 -)))
206 -|(% style="width:102px" %)(((
207 -S31B-NB
208 -)))|(% style="width:126px" %)(((
209 -(% style="text-align:center" %)
210 -[[image:image-20230819110702-7.png||height="164" width="90"]]
211 -)))|(% style="width:179px" %)(((
212 -1 x SHT31 Probe
213 -
214 -Installed in device.
215 -)))
216 -
217 217  (% style="display:none" %)
218 218  
219 219  
220 -
221 -
222 222  = 2. Use S31-NB to communicate with IoT Server =
223 223  
224 224  == 2.1 Send data to IoT server via NB-IoT network ==
... ... @@ -571,7 +571,6 @@
571 571  
572 572  * Update through UART TTL interface : **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
573 573  
574 -
575 575  = 6. FAQ =
576 576  
577 577  == 6.1 How can I access t BC660K-GL AT Commands? ==
... ... @@ -582,7 +582,6 @@
582 582  [[See BC660K-GL AT Command set>>url:https://www.dropbox.com/sh/5f6ssda5fum8rvs/AABT68l8ZzWOvZ5eg2qwOoFda?dl=0]]
583 583  
584 584  
585 -
586 586  = 7. Order Info =
587 587  
588 588  
... ... @@ -594,10 +594,9 @@
594 594  
595 595  * (% style="color:#037691" %)**1D**(%%): with 1NCE* 10 years 500MB SIM card and Pre-configure to DataCake server
596 596  
597 -(% style="color:#037691" %)*** 1NCE SIM Card NB-IoT network coverage**(%%): Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Finland, Germany, Great Britain, Greece, Hungary, Ireland, Italy, Latvia, Malta, Netherlands, Norway, Puerto Rico, Russia, Slovak , Republic, Slovenia, Spain, Sweden, Switzerland, Taiwan, USA, US Virgin Islands
671 +(% style="color:#037691" %)**1NCE SIM Card NB-IoT network coverage**(%%): Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Finland, Germany, Great Britain, Greece, Hungary, Ireland, Italy, Latvia, Malta, Netherlands, Norway, Puerto Rico, Russia, Slovak , Republic, Slovenia, Spain, Sweden, Switzerland, Taiwan, USA, US Virgin Islands
598 598  
599 599  
600 -
601 601  = 8. ​Packing Info =
602 602  
603 603  
... ... @@ -607,7 +607,6 @@
607 607  
608 608  * External antenna x 1
609 609  
610 -
611 611  (% style="color:#037691" %)**Dimension and weight**:
612 612  
613 613  * Device Size: 13.0 x 5 x 4.5 cm
image-20230911134259-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +236.5 KB
Content
image-20230911140426-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +121.6 KB
Content