Skip to Content

Changes for page wiki_test

Last modified by Mengting Qiu on 2024/09/05 17:35
From version 81.4
edited by Xiaoling
on 2023/08/19 13:52
Change comment: There is no comment for this version
To version 82.16
edited by Xiaoling
on 2023/08/19 14:21
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -298,7 +298,6 @@
298 298  
299 299  * Json entry 1 ~~ 8 are the last 1 ~~ 8 sampling data as specify by (% style="color:#037691" %)**AT+NOUD=8 ** (%%)Command. Each entry includes (from left to right): Temperature, Humidity, Sampling time.
300 300  
301 -
302 302  === 2.2.2 HEX format Payload(Type~=0) ===
303 303  
304 304  
... ... @@ -349,7 +349,6 @@
349 349  (FF3F & 8000：Judge whether the highest bit is 1, when the highest bit is 1, it is negative)
350 350  
351 351  
352 -
353 353  (% style="color:blue" %)**Humidity:   **
354 354  
355 355  Read:0295(H)=661(D)    Value:  661 / 10=66.1, So 66.1%
... ... @@ -367,7 +367,6 @@
367 367  
368 368  Type3 payload special design for ThingsBoard, it will also configure other default server to ThingsBoard.
369 369  
370 -
371 371  (% style="color:#4472c4" %)**{"IMEI":866207053462762,"temperature":29.2,"humidity":54.2,"battery":3.27,"signal":24}**
372 372  
373 373  
... ... @@ -378,7 +378,6 @@
378 378  
379 379  Temperature, Humidity, Battery & Signal. This payload type only valid for ThingsSpeak Platform
380 380  
381 -
382 382  As below:
383 383  
384 384  (% style="color:#4472c4" %)**field1=27.9&field2=49.9&field3=3.23&field4=28**
... ... @@ -389,12 +389,10 @@
389 389  
390 390  By default, Sensor will send uplinks (% style="color:blue" %)**every 2 hours**(%%) & AT+NOUD=8
391 391  
392 -
393 393  User can use below commands to change the (% style="color:blue" %)**uplink interval**.
394 394  
395 -(% style="color:#037691" %)**AT+TDC=600 ** (%%) ~/~/ Set Update Interval to 600s
390 +(% style="color:#037691" %)**AT+TDC=600 ** (%%) ~/~/ Set Update Interval to 600s
396 396  
397 -
398 398  User can also push the button for more than 1 seconds to activate an uplink.
399 399  
400 400  
... ... @@ -403,13 +403,13 @@
403 403  
404 404  To save battery life, S31-NB will sample temperature & humidity data every 15 minutes and send one uplink every 2 hours. So each uplink it will include 8 stored data + 1 real-time data. They are defined by:
405 405  
406 -* (% style="color:#037691" %)**AT+TR=900**   (%%) ~/~/  The unit is seconds, and the default is to record data once every 900 seconds (15 minutes, the minimum can be set to 180 seconds)
400 +* (% style="color:#037691" %)**AT+TR=900**   (%%) ~/~/ The unit is seconds, and the default is to record data once every 900 seconds (15 minutes, the minimum can be set to 180 seconds)
407 407  
408 -* (% style="color:#037691" %)**AT+NOUD=8**  (%%)~/~/   The device uploads 8 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
402 +* (% style="color:#037691" %)**AT+NOUD=8**     (%%)~/~/  The device uploads 8 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
409 409  
410 410  The diagram below explains the relationship between TR, NOUD, and TDC more clearly:
411 411  
412 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image001.png||alt="IMG_256"]]
406 +[[image:1692424376354-959.png]]
413 413  
414 414  
415 415  == 2.5 Humidity and Temperature alarm function ==
... ... @@ -422,12 +422,12 @@
422 422  
423 423  (% style="color:#037691" %)**AT+ SHHUM=min,max**
424 424  
425 -Example: AT+ SHHUM=50,80 ~/~/ Alarm when humidity lower than 50 or higher than 80.
419 +Example: AT+ SHHUM=50,80  ~/~/ Alarm when humidity lower than 50 or higher than 80.
426 426  
427 427  
428 428  (% style="color:#037691" %)**AT+ SHTEMP=min,max**
429 429  
430 -Example: AT+ SHTEMP=20,30 ~/~/ Alarm when temperature lower than 20 or higher than 30
424 +Example: AT+ SHTEMP=20,30  ~/~/ Alarm when temperature lower than 20 or higher than 30
431 431  
432 432  
433 433  (% style="color:red" %)**Notice:**
... ... @@ -436,9 +436,6 @@
436 436  
437 437  * If user only want to send only min or max, user can set the alarm to a value that device won’t reach. For example: (% style="color:#037691" %)**AT+SHTEMP=-80,0.**
438 438  
439 -
440 -
441 -
442 442  == 2.6 Trggier an uplink by external interrupt ==
443 443  
444 444  
... ... @@ -446,18 +446,16 @@
446 446  
447 447  (% style="color:blue" %)**AT command:**
448 448  
449 -* (% style="color:#037691" %)**AT+INTMOD **(%%) ~/~/ Set the trigger interrupt mode
440 +* (% style="color:#037691" %)**AT+INTMOD **(%%) ~/~/ Set the trigger interrupt mode
450 450  
451 -* (% style="color:#037691" %)**AT+INTMOD=0 **(%%) ~/~/Disable Interrupt
442 +* (% style="color:#037691" %)**AT+INTMOD=0 **(%%) ~/~/ Disable Interrupt
452 452  
453 -* (% style="color:#037691" %)**AT+INTMOD=1 **(%%) ~/~/Trigger by rising and falling edge
444 +* (% style="color:#037691" %)**AT+INTMOD=1 **(%%) ~/~/ Trigger by rising and falling edge
454 454  
455 -* (% style="color:#037691" %)**AT+INTMOD=2 **(%%) ~/~/Trigger by falling edge
446 +* (% style="color:#037691" %)**AT+INTMOD=2 **(%%) ~/~/ Trigger by falling edge
456 456  
457 -* (% style="color:#037691" %)**AT+INTMOD=3  **(%%) ~/~/Trigger by rising edge
448 +* (% style="color:#037691" %)**AT+INTMOD=3  **(%%) ~/~/ Trigger by rising edge
458 458  
459 -
460 -
461 461  = 3. Configure S31x-NB =
462 462  
463 463  == 3.1 Configure Methods ==
... ... @@ -469,271 +469,161 @@
469 469  
470 470  * AT Command via UART Connection : See [[UART Connection>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H2.3UARTConnectionforSN50v3basemotherboard]].
471 471  
472 -* LoRaWAN Downlink.  Instruction for different platforms: See [[IoT LoRaWAN Server>>http://wiki.dragino.com/xwiki/bin/view/Main/]] section.
461 +== 3.2 AT Commands Set ==
473 473  
474 474  
464 +AT+<CMD>?        : Help on <CMD>
475 475  
476 -== 3.2 General Commands ==
466 +AT+<CMD>         : Run <CMD>
477 477  
468 +AT+<CMD>=<value> : Set the value
478 478  
479 -These commands are to configure:
470 +AT+<CMD>=?       : Get the value
480 480  
481 -* General system settings like: uplink interval.
482 -* LoRaWAN protocol & radio related command.
483 483  
484 -They are same for all Dragino Devices which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:
473 +(% style="color:blue" %)**General Commands**      
485 485  
486 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
475 +AT                    : Attention       
487 487  
477 +AT?  : Short Help     
488 488  
489 -== 3.3 Commands special design for S31x-LB ==
479 +ATZ  : MCU Reset    
490 490  
481 +AT+TDC  : Application Data Transmission Interval
491 491  
492 -These commands only valid for S31x-LB, as below:
483 +AT+CFG  : Print all configurations
493 493  
485 +AT+CFGMOD           : Working mode selection
494 494  
495 -=== 3.3.1 Set Transmit Interval Time ===
487 +AT+DEUI  : Get or set the Device ID
496 496  
489 +AT+INTMOD            : Set the trigger interrupt mode
497 497  
498 -Feature: Change LoRaWAN End Node Transmit Interval.
491 +AT+5VT           : Set extend the time of 5V power  
499 499  
500 -(% style="color:blue" %)**AT Command: AT+TDC**
493 +AT+PRO          : Choose agreement
501 501  
502 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
503 -|=(% style="width: 156px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 137px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="background-color:#D9E2F3;color:#0070C0" %)**Response**
504 -|(% style="width:156px" %)AT+TDC=?|(% style="width:137px" %)Show current transmit Interval|(((
505 -30000
506 -OK
507 -the interval is 30000ms = 30s
508 -)))
509 -|(% style="width:156px" %)AT+TDC=60000|(% style="width:137px" %)Set Transmit Interval|(((
510 -OK
511 -Set transmit interval to 60000ms = 60 seconds
512 -)))
495 +AT+RXDL  : Extend the sending and receiving time
513 513  
514 -(% style="color:blue" %)**Downlink Command: 0x01**
497 +AT+DNSCFG  : Get or Set DNS Server
515 515  
516 -Format: Command Code (0x01) followed by 3 bytes time value.
499 +AT+GETSENSORVALUE   : Returns the current sensor measurement
517 517  
518 -If the downlink payload=0100003C, it means set the END Node's Transmit Interval to 0x00003C=60(S), while type code is 01.
501 +AT+NOUD  : Get or Set the number of data to be uploaded
519 519  
520 -* Example 1: Downlink Payload: 0100001E  ~/~/  Set Transmit Interval (TDC) = 30 seconds
521 -* Example 2: Downlink Payload: 0100003C  ~/~/  Set Transmit Interval (TDC) = 60 seconds
503 +AT+CDP     : Read or Clear cached data
522 522  
523 -=== 3.3.2 Get Device Status ===
505 +AT+SHTEMP:  Get or Set alarm of temp
524 524  
507 +AT+SHHUM:  Get or Set alarm of moisture
525 525  
526 -Send a LoRaWAN downlink to ask device send Alarm settings.
509 +AT+SERVADDR :  Server Address
527 527  
528 -(% style="color:blue" %)**Downlink Payload:  **(%%)0x26 01
529 529  
530 -Sensor will upload Device Status via FPORT=5. See payload section for detail.
512 +(% style="color:blue" %)**UDP Management**
531 531  
514 +AT+CFM  :  Upload confirmation mode (only valid for UDP)
532 532  
533 -=== 3.3.3 Set Temperature Alarm Threshold ===
534 534  
517 +(% style="color:blue" %)**MQTT Management**
535 535  
536 -* (% style="color:blue" %)**AT Command:**
519 +AT+CLIENT               : Get or Set MQTT client
537 537  
538 -(% style="color:#037691" %)**AT+SHTEMP=min,max**
521 +AT+UNAME              : Get or Set MQTT Username
539 539  
540 -* When min=0, and max≠0, Alarm higher than max
541 -* When min≠0, and max=0, Alarm lower than min
542 -* When min≠0 and max≠0, Alarm higher than max or lower than min
523 +AT+PWD                  : Get or Set MQTT password
543 543  
544 -Example:
525 +AT+PUBTOPIC  : Get or Set MQTT publish topic
545 545  
546 - AT+SHTEMP=0,30   ~/~/ Alarm when temperature higher than 30.
527 +AT+SUBTOPIC  : Get or Set MQTT subscription topic
547 547  
548 -* (% style="color:blue" %)**Downlink Payload:**
549 549  
550 -(% style="color:#037691" %)**0x(0C 01 00 1E)**  (%%) ~/~/ Set AT+SHTEMP=0,30
530 +(% style="color:blue" %)**Information**          
551 551  
552 -(% style="color:red" %)**(note: 3^^rd^^ byte= 0x00 for low limit(not set), 4^^th^^ byte = 0x1E for high limit: 30)**
532 +AT+FDR  : Factory Data Reset
553 553  
534 +AT+PWORD  : Serial Access Password
554 554  
555 -=== 3.3.4 Set Humidity Alarm Threshold ===
536 +AT+LDATA  : Get the last upload data
556 556  
538 +AT+CDP  : Read or Clear cached data
557 557  
558 -* (% style="color:blue" %)**AT Command:**
559 559  
560 -(% style="color:#037691" %)**AT+SHHUM=min,max**
561 -
562 -* When min=0, and max≠0, Alarm higher than max
563 -* When min≠0, and max=0, Alarm lower than min
564 -* When min≠0 and max≠0, Alarm higher than max or lower than min
565 -
566 -Example:
567 -
568 - AT+SHHUM=70,0  ~/~/ Alarm when humidity lower than 70%.
569 -
570 -* (% style="color:blue" %)**Downlink Payload:**
571 -
572 -(% style="color:#037691" %)**0x(0C 02 46 00)**(%%)  ~/~/ Set AT+SHTHUM=70,0
573 -
574 -(% style="color:red" %)**(note: 3^^rd^^ byte= 0x46 for low limit (70%), 4^^th^^ byte = 0x00 for high limit (not set))**
575 -
576 -
577 -=== 3.3.5 Set Alarm Interval ===
578 -
579 -
580 -The shortest time of two Alarm packet. (unit: min)
581 -
582 -* (% style="color:blue" %)**AT Command:**
583 -
584 -(% style="color:#037691" %)**AT+ATDC=30** (%%) ~/~/ The shortest interval of two Alarm packets is 30 minutes, Means is there is an alarm packet uplink, there won't be another one in the next 30 minutes.
585 -
586 -* (% style="color:blue" %)**Downlink Payload:**
587 -
588 -(% style="color:#037691" %)**0x(0D 00 1E)**(%%)     **~-~--> ** Set AT+ATDC=0x 00 1E = 30 minutes
589 -
590 -
591 -=== 3.3.6 Get Alarm settings ===
592 -
593 -
594 -Send a LoRaWAN downlink to ask device send Alarm settings.
595 -
596 -* (% style="color:#037691" %)**Downlink Payload:  **(%%)0x0E 01
597 -
598 -**Example:**
599 -
600 -[[image:image-20230524110211-4.png]]
601 -
602 -**Explain:**
603 -
604 -* Alarm & MOD bit is 0x7C, 0x7C >> 2 = 0x31: Means this message is the Alarm settings message.
605 -
606 -=== 3.3.7 Set Interrupt Mode ===
607 -
608 -
609 -Feature, Set Interrupt mode for PA8 of pin.
610 -
611 -When AT+INTMOD=0 is set, PA8 is used as a digital input port.
612 -
613 -(% style="color:blue" %)**AT Command: AT+INTMOD**
614 -
615 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
616 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 197px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Response**
617 -|(% style="width:154px" %)AT+INTMOD=?|(% style="width:196px" %)Show current interrupt mode|(% style="width:157px" %)(((
618 -0
619 -OK
620 -the mode is 0 =Disable Interrupt
621 -)))
622 -|(% style="width:154px" %)AT+INTMOD=2|(% style="width:196px" %)(((
623 -Set Transmit Interval
624 -0. (Disable Interrupt),
625 -~1. (Trigger by rising and falling edge)
626 -2. (Trigger by falling edge)
627 -3. (Trigger by rising edge)
628 -)))|(% style="width:157px" %)OK
629 -
630 -(% style="color:blue" %)**Downlink Command: 0x06**
631 -
632 -Format: Command Code (0x06) followed by 3 bytes.
633 -
634 -This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
635 -
636 -* Example 1: Downlink Payload: 06000000  ~/~/  Turn off interrupt mode
637 -* Example 2: Downlink Payload: 06000003  ~/~/  Set the interrupt mode to rising edge trigger
638 -
639 -=== 3.3.8 Set Power Output Duration ===
640 -
641 -
642 -Control the output duration 5V . Before each sampling, device will
643 -
644 -~1. first enable the power output to external sensor,
645 -
646 -2. keep it on as per duration, read sensor value and construct uplink payload
647 -
648 -3. final, close the power output.
649 -
650 -(% style="color:blue" %)**AT Command: AT+5VT**
651 -
652 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
653 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 197px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Response**
654 -|(% style="width:154px" %)AT+5VT=?|(% style="width:196px" %)Show 5V open time.|(% style="width:157px" %)0 (default)
655 -OK
656 -|(% style="width:154px" %)AT+5VT=1000|(% style="width:196px" %)Close after a delay of 1000 milliseconds.|(% style="width:157px" %)OK
657 -
658 -(% style="color:blue" %)**Downlink Command: 0x07**
659 -
660 -Format: Command Code (0x07) followed by 2 bytes.
661 -
662 -The first and second bytes are the time to turn on.
663 -
664 -* Example 1: Downlink Payload: 070000  **~-~-->**  AT+5VT=0
665 -* Example 2: Downlink Payload: 0701F4  **~-~-->**  AT+5VT=500
666 -
667 667  = 4. Battery & Power Consumption =
668 668  
669 669  
670 -S31x-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
544 +S31x-NB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
671 671  
672 672  [[**Battery Info & Power Consumption Analyze**>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
673 673  
674 674  
675 -= 5. OTA Firmware update =
549 += 5. Firmware update =
676 676  
677 677  
678 -(% class="wikigeneratedid" %)
679 -User can change firmware S31x-LB to:
552 +User can change device firmware to::
680 680  
681 -* Change Frequency band/ region.
682 682  * Update with new features.
555 +
683 683  * Fix bugs.
684 684  
685 -Firmware and changelog can be downloaded from : **[[Firmware download link>>https://www.dropbox.com/sh/fis3g6nmhv0eokg/AAC6BcCZaX4BdqZkduUvZ3jIa?dl=0]]**
558 +Firmware and changelog can be downloaded from : **[[Firmware download link>>https://www.dropbox.com/sh/fhb3uyl4gt6clru/AAAiZVTFcxrfE1JOOyfcgO9ha?dl=0]]**
686 686  
687 -
688 688  Methods to Update Firmware:
689 689  
690 -* (Recommanded way) OTA firmware update via wireless : **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]**
562 +* (Recommended way) OTA firmware update via BLE: [[**Instruction**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/BLE_Firmware_Update_NB_Sensors_BC660K-GL/]].
563 +
691 691  * Update through UART TTL interface : **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
692 692  
566 +
567 +
693 693  = 6. FAQ =
694 694  
570 +== 6.1 How can I access t BC660K-GL AT Commands? ==
695 695  
696 696  
697 -= 7. Order Info =
573 +User can access to BC660K-GL directly and send AT Commands.
698 698  
575 +[[See BC660K-GL AT Command set>>url:https://www.dropbox.com/sh/5f6ssda5fum8rvs/AABT68l8ZzWOvZ5eg2qwOoFda?dl=0]]
699 699  
700 -Part Number: (% style="color:blue" %)**S31-LB-XX  / S31B-LB-XX**
701 701  
702 -(% style="color:red" %)**XX**(%%): The default frequency band
703 703  
704 -* (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
579 += 7. Order Info =
705 705  
706 -* (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
707 707  
708 -* (% style="color:red" %)**EU433**(%%): LoRaWAN EU433 band
582 +Part Number: (% style="color:blue" %)**S31-NB-XX  / S31B-NB-XX**
709 709  
710 -* (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
584 +(% style="color:red" %)**XX**(%%):
711 711  
712 -* (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
586 +* (% style="color:#037691" %)**GE**(%%): General version ( Exclude SIM card)
713 713  
714 -* (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
588 +* (% style="color:#037691" %)**1D**(%%): with 1NCE* 10 years 500MB SIM card and Pre-configure to DataCake server
715 715  
716 -* (% style="color:red" %)**IN865**(%%): LoRaWAN IN865 band
590 +(% style="color:#037691" %)**~* 1NCE SIM Card NB-IoT network coverage**(%%): Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Finland, Germany, Great Britain, Greece, Hungary, Ireland, Italy, Latvia, Malta, Netherlands, Norway, Puerto Rico, Russia, Slovak , Republic, Slovenia, Spain, Sweden, Switzerland, Taiwan, USA, US Virgin Islands
717 717  
718 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
719 719  
593 +
720 720  = 8. ​Packing Info =
721 721  
722 722  
723 723  (% style="color:#037691" %)**Package Includes**:
724 724  
725 -* S31x-LB LoRaWAN Temperature & Humidity Sensor
599 +* S31-NB or S31-NB NB-IoT Sensor Node x 1
726 726  
601 +* External antenna x 1
602 +
603 +
604 +
727 727  (% style="color:#037691" %)**Dimension and weight**:
728 728  
729 -* Device Size: cm
607 +* Device Size: 13.0 x 5 x 4.5 cm
730 730  
731 -* Device Weight: g
609 +* Device Weight: 150g
732 732  
733 -* Package Size / pcs : cm
611 +* Package Size / pcs : 14.0 x 8x 5 cm
734 734  
735 -* Weight / pcs : g
613 +* Weight / pcs : 180g
736 736  
615 +
737 737  = 9. Support =
738 738  
739 739  
1692424376354-959.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +146.1 KB
Content