Skip to Content

Changes for page wiki_test

Last modified by Mengting Qiu on 2024/09/05 17:35
From version 80.7
edited by Xiaoling
on 2023/08/19 11:58
Change comment: There is no comment for this version
To version 70.3
edited by Xiaoling
on 2023/08/19 10:28
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -17,13 +17,13 @@
17 17  == 1.1 What is S31x-NB NB-IoT Temperature & Humidity Sensor ==
18 18  
19 19  
20 -The Dragino S31-NB and S31B-NB are (% style="color:blue" %)**NB-IoT Temperature and Humidity Sensor**(%%) for Internet of Things solution. It is used to measure the surrounding (% style="color:blue" %)**environment temperature and relative air humidity precisely**(%%), and then upload to IoT server via NB-IoT network*.
20 +The Dragino S31-NB and S31B-NB are **NB-IoT Temperature and Humidity Sensor** for Internet of Things solution. It is used to measure the surrounding **environment temperature and relative air humidity precisely**, and then upload to IoT server via NB-IoT network*.
21 21  
22 -The temperature & humidity sensor used in S31-NB is SHT31, which is fully calibrated, linearized, and temperature compensated digital output from Sensirion, it provides a strong reliability and long-term stability. The SHT31 is fixed in a (% style="color:blue" %)**waterproof anti-condensation casing**(%%) for long term use.
22 +The temperature & humidity sensor used in S31-NB is SHT31, which is fully calibrated, linearized, and temperature compensated digital output from Sensirion, it provides a strong reliability and long-term stability. The SHT31 is fixed in a **waterproof anti-condensation casing** for long term use.
23 23  
24 -S31-NB supports different uplink methods include (% style="color:blue" %)**TCP, MQTT, UDP** for different application requirement. and Support Uplinks to various IoT Servers.
24 +S31-NB supports different uplink methods include **TCP, MQTT, UDP** for different application requirement. and Support Uplinks to various IoT Servers.
25 25  
26 -S31-NB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), It is designed for long term use up to several years. (Real-world battery life depends on the use environment, update period and uplink method. Please check related Power Analyze report).
26 +S31-NB is powered by **8500mAh Li-SOCI2 battery**, It is designed for long term use up to several years. (Real-world battery life depends on the use environment, update period and uplink method. Please check related Power Analyze report).
27 27  
28 28  *make sure you have NB-IoT coverage locally.
29 29  
... ... @@ -46,12 +46,13 @@
46 46  * 8500mAh Battery for long term use
47 47  * Nano SIM card slot for NB-IoT SIM
48 48  
49 +
49 49  == 1.3 Specification ==
50 50  
51 51  
52 52  (% style="color:#037691" %)**Common DC Characteristics:**
53 53  
54 -* Supply Voltage: 2.1v ~~ 3.6v
55 +* Supply Voltage: built in 8500mAh Li-SOCI2 battery , 2.5v ~~ 3.6v
55 55  * Operating Temperature: -40 ~~ 85°C
56 56  
57 57  (% style="color:#037691" %)**Temperature Sensor:**
... ... @@ -68,67 +68,38 @@
68 68  * Resolution: 0.01% RH
69 69  * Long Term Shift: <0.25 %RH/yr
70 70  
71 -(% style="color:#037691" %)**NB-IoT Spec:**
72 +(% style="color:#037691" %)**LoRa Spec:**
72 72  
73 -**NB-IoT Module: BC660K-GL**
74 +* Frequency Range,  Band 1 (HF): 862 ~~ 1020 Mhz
75 +* Max +22 dBm constant RF output vs.
76 +* RX sensitivity: down to -139 dBm.
77 +* Excellent blocking immunity
74 74  
75 -Support Bands:
76 -
77 -* B1 @H-FDD: 2100MHz
78 -* B2 @H-FDD: 1900MHz
79 -* B3 @H-FDD: 1800MHz
80 -* B4 @H-FDD: 2100MHz
81 -* B5 @H-FDD: 860MHz
82 -* B8 @H-FDD: 900MHz
83 -* B12 @H-FDD: 720MHz
84 -* B13 @H-FDD: 740MHz
85 -* B17 @H-FDD: 730MHz
86 -* B18 @H-FDD: 870MHz
87 -* B19 @H-FDD: 870MHz
88 -* B20 @H-FDD: 790MHz
89 -* B25 @H-FDD: 1900MHz
90 -* B28 @H-FDD: 750MHz
91 -* B66 @H-FDD: 2000MHz
92 -* B70 @H-FDD: 2000MHz
93 -* B85 @H-FDD: 700MHz
94 -
95 95  (% style="color:#037691" %)**Battery:**
96 96  
97 97  * Li/SOCI2 un-chargeable battery
98 98  * Capacity: 8500mAh
99 -* Self Discharge: <1% / Year @ 25°C
83 +* Self-Discharge: <1% / Year @ 25°C
100 100  * Max continuously current: 130mA
101 101  * Max boost current: 2A, 1 second
102 102  
103 103  (% style="color:#037691" %)**Power Consumption**
104 104  
105 -* STOP Mode: 10uA @ 3.3v
106 -* Max transmit power: 350mA@3.3v
89 +* Sleep Mode: 5uA @ 3.3v
90 +* LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
107 107  
108 -== 1.4 Applications ==
109 109  
93 +== 1.4 Sleep mode and working mode ==
110 110  
111 -* Smart Buildings & Home Automation
112 -* Logistics and Supply Chain Management
113 -* Smart Metering
114 -* Smart Agriculture
115 -* Smart Cities
116 -* Smart Factory
117 117  
118 -
119 -
120 -== 1.5 Sleep mode and working mode ==
121 -
122 -
123 123  (% style="color:blue" %)**Deep Sleep Mode: **(%%)Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.
124 124  
125 125  (% style="color:blue" %)**Working Mode:** (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
126 126  
127 127  
101 +== 1.5 Button & LEDs ==
128 128  
129 -== 1.6 Button & LEDs ==
130 130  
131 -
132 132  [[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675071855856-879.png]]
133 133  
134 134  
... ... @@ -135,22 +135,23 @@
135 135  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
136 136  |=(% style="width: 167px;background-color:#D9E2F3;color:#0070C0" %)**Behavior on ACT**|=(% style="width: 117px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 225px;background-color:#D9E2F3;color:#0070C0" %)**Action**
137 137  |(% style="width:167px" %)Pressing ACT between 1s < time < 3s|(% style="width:117px" %)Send an uplink|(% style="width:225px" %)(((
138 -If sensor has already attached to NB-IoT network, sensor will send an uplink packet, (% style="color:blue" %)**blue led** (%%)will blink once.
110 +If sensor is already Joined to LoRaWAN network, sensor will send an uplink packet, (% style="color:blue" %)**blue led** (%%)will blink once.
139 139  Meanwhile, BLE module will be active and user can connect via BLE to configure device.
140 140  )))
141 141  |(% style="width:167px" %)Pressing ACT for more than 3s|(% style="width:117px" %)Active Device|(% style="width:225px" %)(((
142 -(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:#037691" %)**OTA mode**(%%) for 3 seconds. And then start to attach NB-IoT network.
114 +(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:#037691" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network.
143 143  (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
144 -Once sensor is active, BLE module will be active and user can connect via BLE to configure device, no matter if device attach NB-IoT network or not.
116 +Once sensor is active, BLE module will be active and user can connect via BLE to configure device, no matter if device join or not join LoRaWAN network.
145 145  )))
146 146  |(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means device is in Deep Sleep Mode.
147 147  
148 -== 1.7 BLE connection ==
149 149  
121 +== 1.6 BLE connection ==
150 150  
151 -S31x-NB support BLE remote configure and firmware update.
152 152  
124 +S31x-LB support BLE remote configure.
153 153  
126 +
154 154  BLE can be used to configure the parameter of sensor or see the console output from sensor. BLE will be only activate on below case:
155 155  
156 156  * Press button to send an uplink
... ... @@ -160,334 +160,444 @@
160 160  If there is no activity connection on BLE in 60 seconds, sensor will shut down BLE module to enter low power mode.
161 161  
162 162  
163 -== 1.8 Pin Definitions & Switch ==
136 +== 1.7 Pin Definitions ==
164 164  
138 +[[image:http://8.211.40.43/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SN50v3-LB/WebHome/image-20230610163213-1.png?width=699&height=404&rev=1.1||alt="image-20230610163213-1.png"]]
165 165  
166 -S31x-NB use the mother board from S31-NB which as below.
167 167  
168 -[[image:image-20230819104805-5.png]]
141 +== 1.8 Hardware Variant ==
169 169  
170 170  
144 +(% border="1" cellspacing="5" style="width:472px" %)
145 +|=(% style="width: 102px;background-color:#D9E2F3;color:#0070C0" %)Model|=(% style="width: 190px;background-color:#D9E2F3;color:#0070C0" %)Photo|=(% style="width: 187px; background-color:#D9E2F3;color:#0070C0" %)Probe Info
146 +|(% style="width:102px" %)(((
147 +S31-LB
148 +)))|(% style="width:190px" %)[[image:image-20230527093214-2.jpeg]]|(% style="width:187px" %)(((
149 +1 x SHT31 Probe
171 171  
172 -=== 1.8.1 Jumper JP2 ===
151 +Cable Length : 2 meters
173 173  
153 +
154 +)))
155 +|(% style="width:102px" %)(((
156 +S31B-LB
157 +)))|(% style="width:190px" %)[[image:image-20230527093155-1.jpeg]]|(% style="width:187px" %)(((
158 +1 x SHT31 Probe
174 174  
175 -Power on Device when put this jumper.
160 +Installed in device.
161 +)))
176 176  
163 +(% style="display:none" %)
177 177  
178 -=== 1.8.2 BOOT MODE / SW1 ===
179 179  
180 180  
181 -1) (% style="color:blue" %)**ISP**(%%): upgrade mode, device won't have any signal in this mode. but ready for upgrade firmware. LED won't work. Firmware won't run.
167 +== 1.9 Mechanical ==
182 182  
183 -2) (% style="color:blue" %)**Flash**(%%): work mode, device starts to work and send out console output for further debug
184 184  
170 +[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143884058-338.png]]
185 185  
186 -=== 1.8.3 Reset Button ===
187 187  
173 +[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143899218-599.png]]
188 188  
189 -Press to reboot the device.
190 190  
176 +[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143909447-639.png]]
191 191  
192 192  
193 -== 1.9 Hardware Variant ==
179 += 2. Configure S31x-LB to connect to LoRaWAN network =
194 194  
181 +== 2.1 How it works ==
195 195  
196 -(% border="1" cellspacing="5" style="width:410px" %)
197 -|=(% style="width: 102px;background-color:#D9E2F3;color:#0070C0" %)Model|=(% style="width: 126px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)Photo|=(% style="width: 179px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)Probe Info
198 -|(% style="width:102px" %)(((
199 -S31-LB
200 -)))|(% style="width:126px" %)(((
201 -(% style="text-align:center" %)
202 -[[image:image-20230819110632-6.png||height="130" width="104"]]
203 -)))|(% style="width:179px" %)(((
204 -1 x SHT31 Probe
205 205  
206 -Cable Length : 3 meters
184 +The S31x-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the S31x-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
207 207  
208 -
209 -)))
210 -|(% style="width:102px" %)(((
211 -S31B-LB
212 -)))|(% style="width:126px" %)(((
213 -(% style="text-align:center" %)
214 -[[image:image-20230819110702-7.png||height="164" width="90"]]
215 -)))|(% style="width:179px" %)(((
216 -1 x SHT31 Probe
217 217  
218 -Installed in device.
219 -)))
187 +== 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
220 220  
221 -(% style="display:none" %)
222 222  
190 +Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example.
223 223  
192 +The LPS8V2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
224 224  
225 225  
226 -= 2. Use S31-NB to communicate with IoT Server =
195 +(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from S31x-LB.
227 227  
228 -== 2.1 Send data to IoT server via NB-IoT network ==
197 +Each S31x-LB is shipped with a sticker with the default device EUI as below:
229 229  
199 +[[image:image-20230426084152-1.png||alt="图片-20230426084152-1.png" height="233" width="502"]]
230 230  
231 -The S31-NB is equipped with a NB-IoT module, the pre-loaded firmware in S31-NB will get environment data from sensors and send the value to local NB-IoT network via the NB-IoT module.  The NB-IoT network will forward this value to IoT server via the protocol defined by S31-NB.
232 232  
202 +You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:
233 233  
234 -Below shows the network structure:
235 235  
236 -[[image:1692415924540-357.png]]
205 +(% style="color:blue" %)**Register the device**
237 237  
207 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/1654935135620-998.png?rev=1.1||alt="1654935135620-998.png"]]
238 238  
239 -There are two version: (% style="color:blue" %)**-GE**(%%) and (% style="color:blue" %)**-1D**(%%) version of S31-NB.
240 240  
210 +(% style="color:blue" %)**Add APP EUI and DEV EUI**
241 241  
242 -(% style="color:blue" %)**GE Version**(%%): This version doesn’t include SIM card or point to any IoT server. User needs to use AT Commands to configure below two steps to set S31-NB send data to IoT server.
212 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-4.png?width=753&height=551&rev=1.1||alt="图片-20220611161308-4.png"]]
243 243  
244 -1. Install NB-IoT SIM card and configure APN. See instruction of [[Attach Network>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H2.AttachNetwork]].
245 245  
246 -1. Set up sensor to point to IoT Server. See instruction of [[Configure to Connect Different Servers>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.Configuretoconnecttodifferentservers]].
215 +(% style="color:blue" %)**Add APP EUI in the application**
247 247  
248 -Below shows result of different server as a glance.
249 249  
218 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-5.png?width=742&height=601&rev=1.1||alt="图片-20220611161308-5.png"]]
250 250  
251 -|**Servers**|**Dash Board**|**Comments**
252 -|[[Node-Red>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.5A0Node-RedA028viaA0MQTT29]]|[[image:image-20230819113244-8.png]]|
253 -|[[DataCake>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.4Datacake]]|[[image:image-20230819113244-9.png]]|
254 -|[[Tago.IO>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.7A0Tago.ioA028viaA0MQTT29]]| |
255 -|[[General UDP>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.1GeneralA0UDPA0Connection]]|Raw Payload. Need Developer to design Dash Board|
256 -|[[General MQTT>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.2GeneralA0MQTTA0Connection]]|Raw Payload. Need Developer to design Dash Board|
257 -|[[ThingSpeak>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.3A0ThingSpeakA028viaA0MQTT29]]|[[image:image-20230819113244-10.png]]|
258 -|[[ThingsBoard>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.6A0ThingsBoard.CloudA028viaA0MQTT29]]|[[image:image-20230819113244-11.png]]|
259 -| | |
260 260  
221 +(% style="color:blue" %)**Add APP KEY**
261 261  
223 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-6.png?width=744&height=485&rev=1.1||alt="图片-20220611161308-6.png"]]
262 262  
263 -(% style="color:blue" %)**1D Version**(%%): This version has 1NCE SIM card pre-installed and configure to send value to DataCake. User Just need to select the sensor type in DataCake and Activate S31-NB and user will be able to see data in DataCake. See here for [[DataCake Config Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.4Datacake]].
264 264  
226 +(% style="color:blue" %)**Step 2:**(%%) Activate on S31x-LB
265 265  
266 -== 2.2 ​Payload Types ==
267 267  
229 +Press the button for 5 seconds to activate the S31x-LB.
268 268  
269 -To meet different server requirement, S31-NB supports different payload type.
231 +(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:blue" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network. (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
270 270  
271 -Includes:
233 +After join success, it will start to upload messages to TTN and you can see the messages in the panel.
272 272  
273 -* [[General JSON format payload>>path:#General_Json]]. (Type=5)
274 274  
275 -* [[HEX format Payload>>path:#HEX_Payload]]. (Type=0)
236 +== 2.3 ​Uplink Payload ==
276 276  
277 -* [[ThingSpeak Format>>path:#ThingSpeak_Payload]]. (Type=1)
238 +=== 2.3.1 Device Status, FPORT~=5 ===
278 278  
279 -* [[ThingsBoard Format>>path:#ThingsBoard_Payload]]. (Type=3)
280 280  
241 +Users can use the downlink command(**0x26 01**) to ask S31x-LB to send device configure detail, include device configure status. S31x-LB will uplink a payload via FPort=5 to server.
281 281  
282 -User can specify the payload type when choose the connection protocol. Example:
243 +The Payload format is as below.
283 283  
284 -(% style="color:#037691" %)**AT+PRO=2,0** (%%) ~/~/Use UDP Connection & hex Payload
285 285  
286 -(% style="color:#037691" %)**AT+PRO=2,5** (%%) ~/~/ Use UDP Connection & Json Payload
246 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
247 +|(% colspan="6" style="background-color:#d9e2f3; color:#0070c0" %)**Device Status (FPORT=5)**
248 +|(% style="width:103px" %)**Size (bytes)**|(% style="width:72px" %)**1**|**2**|(% style="width:91px" %)**1**|(% style="width:86px" %)**1**|(% style="width:44px" %)**2**
249 +|(% style="width:103px" %)**Value**|(% style="width:72px" %)Sensor Model|Firmware Version|(% style="width:91px" %)Frequency Band|(% style="width:86px" %)Sub-band|(% style="width:44px" %)BAT
287 287  
288 -(% style="color:#037691" %)**AT+PRO=3,5 ** (%%) ~/~/ Use MQTT Connection & Json Payload
251 +Example parse in TTNv3
289 289  
253 +[[image:image-20230524144422-1.png||height="174" width="1080"]]
290 290  
291 -=== 2.2.1 General Json Format (Type=5) ===
292 292  
293 -This is the General Json Format. As below:
256 +(% style="color:#037691" %)**Sensor Model**(%%): For S31x-LB, this value is 0x0A
294 294  
258 +(% style="color:#037691" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
295 295  
296 -(% style="color:#4472C4" %)**{"IMEI":866207053462762,"temperature":29.2,"humidity":54.2,"battery":3.27,"signal":24,"Model":S31x-NB, "1":{28.2,48.3,2023/08/10 08:00:37},"2":{28.1,49.1,2023/08/10 07:57:37},"3":{28.1,48.5,2023/08/10 07:54:37},"4":{28.2,48.6,2023/08/10 07:51:37},"5":{28.1,48.9,2023/08/10 07:48:37},"6":{28.2,48.8,2023/08/10 07:45:37},"7":{28.2,48.8,2023/08/10 07:42:37},"8":{28.0,48.8,2023/08/10 07:39:37}}**
260 +(% style="color:#037691" %)**Frequency Band**:
297 297  
262 +0x01: EU868
298 298  
264 +0x02: US915
299 299  
300 -(% style="color:red" %)Notice, from above payload:
266 +0x03: IN865
301 301  
302 -* Temperature , Humidity , Battery & Signal are the value at uplink time.
268 +0x04: AU915
303 303  
304 -* Json entry 1 ~~ 8 are the last 1 ~~ 8 sampling data as specify by (% style="color:#037691" %)**AT+NOUD=8 ** (%%)Command. Each entry includes (from left to right): Temperature, Humidity, Sampling time.
270 +0x05: KZ865
305 305  
272 +0x06: RU864
306 306  
274 +0x07: AS923
307 307  
276 +0x08: AS923-1
308 308  
309 -=== 2.2.2 HEX format Payload(Type=0) ===
278 +0x09: AS923-2
310 310  
280 +0x0a: AS923-3
311 311  
312 -This is the HEX Format. As below:
282 +0x0b: CN470
313 313  
314 -(% style="color:#4472C4" %)**f86620705346276200640cba16010000000011011801e864d49c2d011a01e364d49925011901eb64d49871011901e564d497bd011a01e664d49709011901e964d49655011a01e864d495a1011a01e864d494ed011801e864d49439**
284 +0x0c: EU433
315 315  
286 +0x0d: KR920
316 316  
317 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image001.png]]
288 +0x0e: MA869
318 318  
319 319  
320 -(% style="color:blue" %)**Version:**
291 +(% style="color:#037691" %)**Sub-Band**:
321 321  
322 -These bytes include the hardware and software version.
293 +AU915 and US915:value 0x00 ~~ 0x08
323 323  
324 -(% style="color:#037691" %)**Higher byte:**(%%) Specify Sensor Model: 0x00 for S31B-NB & S31-NB
295 +CN470: value 0x0B ~~ 0x0C
325 325  
326 -(% style="color:#037691" %)**Lower byte:**(%%) Specify the software version: 0x64=100, means firmware version 100
297 +Other Bands: Always 0x00
327 327  
328 328  
329 -(% style="color:#037691" %)**BAT (Battery Info):**
300 +(% style="color:#037691" %)**Battery Info**:
330 330  
331 -Ex1: 0x0CBA = 3258mV
302 +Check the battery voltage.
332 332  
304 +Ex1: 0x0B45 = 2885mV
333 333  
334 -(% style="color:blue" %)**Signal Strength:**
306 +Ex2: 0x0B49 = 2889mV
335 335  
336 -NB-IoT Network signal Strength.
337 337  
338 -**Ex1: 0x16 = 22**
309 +=== 2.3.2  Sensor Data. FPORT~=2 ===
339 339  
340 -**0**  -113dBm or less
341 341  
342 -**1**  -111dBm
312 +Sensor Data is uplink via FPORT=2
343 343  
344 -**2...30** -109dBm... -53dBm
314 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)
315 +|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)(((
316 +**Size(bytes)**
317 +)))|=(% style="width: 40px;background-color:#D9E2F3;color:#0070C0" %)2|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)4|=(% style="width: 150px; background-color: #D9E2F3;color:#0070C0" %)1|=(% style="width: 80px; background-color: #D9E2F3;color:#0070C0" %)**2**|=(% style="width: 80px; background-color: #D9E2F3;color:#0070C0" %)2
318 +|(% style="width:99px" %)Value|(% style="width:69px" %)(((
319 +Battery
320 +)))|(% style="width:130px" %)(((
321 +Unix TimeStamp
322 +)))|(% style="width:194px" %)(((
323 +Alarm Flag & MOD& Level of PA8
324 +)))|(% style="width:106px" %)(((
325 +Temperature
326 +)))|(% style="width:97px" %)(((
327 +Humidity
328 +)))
345 345  
346 -**31**   -51dBm or greater
330 +[[image:image-20230524144456-2.png||height="180" width="1142"]]
347 347  
348 -**99**    Not known or not detectable
349 349  
333 +==== (% style="color:#4472c4" %)**Battery**(%%) ====
350 350  
351 -(% style="color:blue" %)**Temperature: **
335 +Sensor Battery Level.
352 352  
337 +Ex1: 0x0B45 = 2885mV
338 +
339 +Ex2: 0x0B49 = 2889mV
340 +
341 +
342 +==== (% style="color:#4472c4" %)**Temperature**(%%) ====
343 +
344 +**Example**:
345 +
353 353  If payload is: 0105H:  (0105 & 8000 == 0), temp = 0105H /10 = 26.1 degree
354 354  
355 355  If payload is: FF3FH :  (FF3F & 8000 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
356 356  
357 -(FF3F & 8000：Judge whether the highest bit is 1, when the highest bit is 1, it is negative)
350 +（FF3F & 8000：Judge whether the highest bit is 1, when the highest bit is 1, it is negative）
358 358  
359 359  
353 +==== (% style="color:#4472c4" %)**Humidity**(%%) ====
360 360  
361 -(% style="color:blue" %)**Humidity:   **
362 362  
363 -Read:0295(H)=661(D)    Value:  661 / 10=66.1, So 66.1%
356 +Read:0x(0197)=412    Value:  412 / 10=41.2, So 41.2%
364 364  
365 365  
366 -(% style="color:blue" %)**TimeStamp:   **
359 +==== (% style="color:#4472c4" %)**Alarm Flag & MOD & Level of PA8**(%%) ====
367 367  
368 -Unit TimeStamp Example: 64d49439(H) = 1691653177(D)
369 369  
370 -Put the decimal value into this link(https:~/~/www.epochconverter.com/) to get the time.
362 +**Example:**
371 371  
364 +If payload & 0x01 = 0x01  **~-~->** This is an Alarm Message.It means that the temperature and humidity exceed the alarm value or trigger an interrupt.
372 372  
373 -=== 2.2.3 ThingsBoard Payload(Type=3) ===
366 +If payload & 0x01 = 0x00  **~-~->** This is a normal uplink message, no alarm.
374 374  
375 -Type3 payload special design for ThingsBoard, it will also configure other default server to ThingsBoard.
368 +If payload & 0x80>>7 = 0x01  **~-~->** The PA8 is low level.
376 376  
370 +If payload & 0x80>>7 =0x00  **~-~->** The PA8 is high level.
377 377  
378 -(% style="color:#4472C4" %)**{"IMEI":866207053462762,"temperature":29.2,"humidity":54.2,"battery":3.27,"signal":24}**
372 +If payload >> 2 = 0x00  **~-~->**  means MOD=1, This is a sampling uplink message.
379 379  
374 +If payload >> 2 = 0x31  **~-~->**  means MOD=31, this message is a reply message for polling, this message contains the alarm settings. see [[this link>>path:#HPolltheAlarmsettings:]] for detail. 
380 380  
381 -=== 2.2.4 ThingSpeak Payload(Type=1) ===
382 382  
383 -This payload meets ThingSpeak platform requirement. It includes only four fields. Form 1~~4 are:
377 +== 2.4 Payload Decoder file ==
384 384  
385 -Temperature, Humidity, Battery & Signal. This payload type only valid for ThingsSpeak Platform
386 386  
380 +In TTN, use can add a custom payload so it shows friendly reading
387 387  
388 -As below:
382 +In the page (% style="color:#037691" %)**Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder**(%%) to add the decoder from:
389 389  
390 -(% style="color:#4472C4" %)**field1=27.9&field2=49.9&field3=3.23&field4=28**
384 +[[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/S31-LB%26S31B-LB>>https://github.com/dragino/dragino-end-node-decoder/tree/main/S31-LB%26S31B-LB]]
391 391  
392 392  
393 -== 2.3 Test Uplink and Change Update Interval ==
387 +== 2.5 Datalog Feature ==
394 394  
395 395  
396 -By default, Sensor will send uplinks (% style="color:blue" %)**every 2 hours**(%%) & AT+NOUD=8
390 +Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, S31x-LB will store the reading for future retrieving purposes.
397 397  
398 398  
399 -User can use below commands to change the (% style="color:blue" %)**uplink interval**.
393 +=== 2.5.1 Ways to get datalog via LoRaWAN ===
400 400  
401 -(% style="color:#037691" %)**~ AT+TDC=600      ** (%%) ~/~/ Set Update Interval to 600s
402 402  
396 +Set [[PNACKMD=1>>||anchor="H2.5.4DatalogUplinkpayload28FPORT3D329"]], S31x-LB will wait for ACK for every uplink, when there is no LoRaWAN network,S31x-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
403 403  
404 -User can also push the button for more than 1 seconds to activate an uplink.
398 +* (((
399 +a) S31x-LB will do an ACK check for data records sending to make sure every data arrive server.
400 +)))
401 +* (((
402 +b) S31x-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but S31x-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if S31x-LB gets a ACK, S31x-LB will consider there is a network connection and resend all NONE-ACK messages.
403 +)))
405 405  
405 +Below is the typical case for the auto-update datalog feature (Set PNACKMD=1)
406 406  
407 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="图片-20220703111700-2.png" height="381" width="1119"]]
407 407  
408 408  
409 -== 2.4 Multi-Samplings and One uplink ==
410 +=== 2.5.2 Unix TimeStamp ===
410 410  
411 411  
412 -To save battery life, S31-NB will sample temperature & humidity data every 15 minutes and send one uplink every 2 hours. So each uplink it will include 8 stored data + 1 real-time data. They are defined by:
413 +S31x-LB uses Unix TimeStamp format based on
413 413  
414 -* (% style="color:#037691" %)**AT+TR=900**   (%%)  ~/~/  The unit is seconds, and the default is to record data once every 900 seconds (15 minutes, the minimum can be set to 180 seconds)
415 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="图片-20220523001219-11.png" height="97" width="627"]]
415 415  
416 -* (% style="color:#037691" %)**AT+NOUD=8**  (%%)~/~/   The device uploads 8 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
417 +User can get this time from link:  [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/]] :
417 417  
419 +Below is the converter example
418 418  
419 -The diagram below explains the relationship between TR, NOUD, and TDC more clearly:
421 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-12.png?width=720&height=298&rev=1.1||alt="图片-20220523001219-12.png" height="298" width="720"]]
420 420  
421 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image001.png||alt="IMG_256"]]
422 422  
424 +So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25
423 423  
424 -== 2.5 Humidity and Temperature alarm function ==
425 425  
427 +=== 2.5.3 Set Device Time ===
426 426  
427 -On each sampling define by AT+TR ( default 900s or 15 minutes), when the value exceed the range, it will trigger an Alarm and immediately sends a uplink.
428 428  
430 +User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.
429 429  
430 -(% style="color:blue" %)**AT Commands:**
432 +Once S31x-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to S31x-LB. If S31x-LB fails to get the time from the server, S31x-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
431 431  
432 -(% style="color:#037691" %)**AT+ SHHUM=min,max**
434 +(% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.**
433 433  
434 -Example: AT+ SHHUM=50,80 ~/~/ Alarm when humidity lower than 50 or higher than 80.
435 435  
437 +=== 2.5.4 Datalog Uplink payload (FPORT~=3) ===
436 436  
437 -(% style="color:#037691" %)**AT+ SHTEMP=min,max**
438 438  
439 -Example: AT+ SHTEMP=20,30 ~/~/ Alarm when temperature lower than 20 or higher than 30
440 +The Datalog uplinks will use below payload format.
440 440  
442 +**Retrieval data payload:**
441 441  
442 -(% style="color:red" %)**Notice:**
444 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)
445 +|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)(((
446 +**Size(bytes)**
447 +)))|=(% style="width: 40px; background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 55px; background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 65px; background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 180px; background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 100px; background-color:#D9E2F3;color:#0070C0" %)**4**
448 +|(% style="width:103px" %)Value|(% style="width:68px" %)(((
449 +ignore
450 +)))|(% style="width:104px" %)(((
451 +(((
452 +Humidity
453 +)))
443 443  
444 -* To disable Alarm, user can set min and max to same value , such as (% style="color:#037691" %)**AT+SHTEMP=0,0.**
455 +(((
456 +
457 +)))
458 +)))|(% style="width:87px" %)(((
459 +Temperature
460 +)))|(% style="width:178px" %)(((
461 +Poll message flag & Alarm Flag& Level of PA8
462 +)))|(% style="width:137px" %)Unix Time Stamp
445 445  
446 -* If user only want to send only min or max, user can set the alarm to a value that device won’t reach. For example: (% style="color:#037691" %)**AT+SHTEMP=-80,0.**
464 +**Poll message flag & Alarm Flag & Level of PA8:**
447 447  
466 +[[image:image-20230524114302-1.png||height="115" width="736"]]
448 448  
449 449  
469 +**No ACK Message**:  1: This message means this payload is fromn Uplink Message which doesn't get ACK from the server before ( for **PNACKMD=1** feature)
450 450  
471 +**Poll Message Flag**: 1: This message is a poll message reply.
451 451  
473 +* Poll Message Flag is set to 1.
452 452  
453 -== 2.6 Trggier an uplink by external interrupt ==
475 +* Each data entry is 11 bytes, to save airtime and battery, devices will send max bytes according to the current DR and Frequency bands.
454 454  
477 +For example, in US915 band, the max payload for different DR is:
455 455  
456 -S31-NB has an external trigger interrupt function. Users can use the PB15 pin to trigger the upload of data packets.
479 +**a) DR0:** max is 11 bytes so one entry of data
457 457  
458 -(% style="color:blue" %)**AT command:**
481 +**b) DR1:** max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
459 459  
460 -* (% style="color:#037691" %)**AT+INTMOD **(%%)  ~/~/ Set the trigger interrupt mode
483 +**c) DR2:** total payload includes 11 entries of data
461 461  
462 -* (% style="color:#037691" %)**AT+INTMOD=0 **(%%)   ~/~/Disable Interrupt
485 +**d) DR3: **total payload includes 22 entries of data.
463 463  
464 -* (% style="color:#037691" %)**AT+INTMOD=1 **(%%)  ~/~/Trigger by rising and falling edge
487 +If devise doesn't have any data in the polling time. Device will uplink 11 bytes of 0   
465 465  
466 -* (% style="color:#037691" %)**AT+INTMOD=2 **(%%)  ~/~/Trigger by falling edge
489 +**Example:**
467 467  
468 -* (% style="color:#037691" %)**AT+INTMOD=3  **(%%)  ~/~/Trigger by rising edge
491 +If S31x-LB has below data inside Flash:
469 469  
493 +[[image:image-20230524114654-2.png]]
470 470  
471 471  
496 +If user sends below downlink command: 31646D84E1646D856C05
472 472  
498 +Where : Start time: 646D84E1 = time 23/5/24 03:30:41
473 473  
474 -= 3. Configure S31x-NB =
500 + Stop time: 646D856C= time 23/5/24 03:33:00
475 475  
476 -== 3.1 Configure Methods ==
477 477  
503 +**S31x-LB will uplink this payload.**
478 478  
479 -S31x-NB supports below configure method:
505 +[[image:image-20230524114826-3.png||height="448" width="1244"]]
480 480  
481 -* AT Command via Bluetooth Connection (**Recommended**): [[BLE Configure Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
507 +(((
508 +00 00 02 36 01 10 40 64 6D 84 E1 00 00 02 37 01 10 40 64 6D 84 F8 00 00 02 37 01 0F 40 64 6D 85 04 00 00 02 3A 01 0F 40 64 6D 85 18 00 00 02 3C 01 0F 40 64 6D 85 36 00 00 02 3D 01 0E 40 64 6D 85 3F 00 00 02 3F 01 0E 40 64 6D 85 60 00 00 02 40 01 0E 40 64 6D 85 6A
509 +)))
482 482  
483 -* AT Command via UART Connection : See [[UART Connection>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H2.3UARTConnectionforSN50v3basemotherboard]].
511 +(((
512 +Where the first 11 bytes is for the first entry:
513 +)))
484 484  
485 -* LoRaWAN Downlink.  Instruction for different platforms: See [[IoT LoRaWAN Server>>http://wiki.dragino.com/xwiki/bin/view/Main/]] section.
515 +(((
516 +00 00 02 36 01 10 40 64 6D 84 E1
517 +)))
486 486  
519 +(((
520 +**Hum**=0x0236/10=56.6
521 +)))
487 487  
523 +(((
524 +**Temp**=0x0110/10=27.2
525 +)))
488 488  
527 +(((
528 +**poll message flag & Alarm Flag & Level of PA8**=0x40,means reply data,sampling uplink message,the PA8 is low level.
529 +)))
489 489  
531 +(((
532 +**Unix time** is 0x646D84E1=1684899041s=23/5/24 03:30:41
533 +)))
490 490  
535 +
536 +(% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" data-widget="image" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="单击并拖动以调整大小" %)的(% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" data-widget="image" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="单击并拖动以调整大小" %)的
537 +
538 +== 2.6 Temperature Alarm Feature ==
539 +
540 +
541 +S31x-LB work flow with Alarm feature.
542 +
543 +
544 +[[image:image-20230524110125-3.png||height="768" width="1115"]]
545 +
546 +
547 +
548 +== 2.7 Frequency Plans ==
549 +
550 +
551 +The S31x-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
552 +
553 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/]]
554 +
555 +
556 +== 2.8 ​Firmware Change Log ==
557 +
558 +
559 +**Firmware download link: **[[https:~~/~~/www.dropbox.com/sh/fis3g6nmhv0eokg/AAC6BcCZaX4BdqZkduUvZ3jIa?dl=0>>https://www.dropbox.com/sh/fis3g6nmhv0eokg/AAC6BcCZaX4BdqZkduUvZ3jIa?dl=0]]
560 +
561 +
562 += 3. Configure S31x-LB =
563 +
564 +== 3.1 Configure Methods ==
565 +
566 +
567 +S31x-LB supports below configure method:
568 +
569 +* AT Command via Bluetooth Connection (**Recommended**): [[BLE Configure Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
570 +* AT Command via UART Connection : See [[UART Connection>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H2.3UARTConnectionforSN50v3basemotherboard]].
571 +* LoRaWAN Downlink.  Instruction for different platforms: See [[IoT LoRaWAN Server>>http://wiki.dragino.com/xwiki/bin/view/Main/]] section.
572 +
573 +
491 491  == 3.2 General Commands ==
492 492  
493 493  
... ... @@ -535,6 +535,7 @@
535 535  * Example 1: Downlink Payload: 0100001E  ~/~/  Set Transmit Interval (TDC) = 30 seconds
536 536  * Example 2: Downlink Payload: 0100003C  ~/~/  Set Transmit Interval (TDC) = 60 seconds
537 537  
621 +
538 538  === 3.3.2 Get Device Status ===
539 539  
540 540  
... ... @@ -618,6 +618,7 @@
618 618  
619 619  * Alarm & MOD bit is 0x7C, 0x7C >> 2 = 0x31: Means this message is the Alarm settings message.
620 620  
705 +
621 621  === 3.3.7 Set Interrupt Mode ===
622 622  
623 623  
... ... @@ -651,6 +651,7 @@
651 651  * Example 1: Downlink Payload: 06000000  ~/~/  Turn off interrupt mode
652 652  * Example 2: Downlink Payload: 06000003  ~/~/  Set the interrupt mode to rising edge trigger
653 653  
739 +
654 654  === 3.3.8 Set Power Output Duration ===
655 655  
656 656  
... ... @@ -679,6 +679,7 @@
679 679  * Example 1: Downlink Payload: 070000  **~-~-->**  AT+5VT=0
680 680  * Example 2: Downlink Payload: 0701F4  **~-~-->**  AT+5VT=500
681 681  
768 +
682 682  = 4. Battery & Power Consumption =
683 683  
684 684  
... ... @@ -705,6 +705,7 @@
705 705  * (Recommanded way) OTA firmware update via wireless : **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]**
706 706  * Update through UART TTL interface : **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
707 707  
795 +
708 708  = 6. FAQ =
709 709  
710 710  
... ... @@ -732,6 +732,7 @@
732 732  
733 733  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
734 734  
823 +
735 735  = 8. ​Packing Info =
736 736  
737 737  
... ... @@ -749,6 +749,7 @@
749 749  
750 750  * Weight / pcs : g
751 751  
841 +
752 752  = 9. Support =
753 753  
754 754  
... ... @@ -755,5 +755,3 @@
755 755  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
756 756  
757 757  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[Support@dragino.cc>>mailto:Support@dragino.cc]].
758 -
759 -(% style="display:none" %) (%%)
1692413185538-164.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -777.4 KB
Content
1692415924540-357.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -94.4 KB
Content
image-20230819104725-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -583.4 KB
Content
image-20230819104805-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -582.8 KB
Content
image-20230819110632-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -224.4 KB
Content
image-20230819110702-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -53.2 KB
Content
image-20230819113244-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -12.0 KB
Content
image-20230819113244-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -57.5 KB
Content
image-20230819113244-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.0 KB
Content
image-20230819113244-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -35.5 KB
Content