Changes for page wiki_test

Last modified by Mengting Qiu on 2024/09/05 17:35

From 80.3 to 80.4 From 82.28 to 82.29

From version 80.4

edited by Xiaoling
on 2023/08/19 11:55

Change comment: There is no comment for this version

To version 82.28

edited by Xiaoling
on 2023/08/19 15:02

Change comment: There is no comment for this version

Raw
Rendered

Summary

Page properties (1 modified, 0 added, 0 removed)
Attachments (0 modified, 2 added, 0 removed)
- 1692424009971-458.png
- 1692424376354-959.png

Details

Page properties

Content

@@ -3,7 +3,7 @@
--**Table of Contents：**
++**Table of Contents:**
  {{toc/}}
@@ -21,7 +21,7 @@
  The temperature & humidity sensor used in S31-NB is SHT31, which is fully calibrated, linearized, and temperature compensated digital output from Sensirion, it provides a strong reliability and long-term stability. The SHT31 is fixed in a (% style="color:blue" %)**waterproof anti-condensation casing**(%%) for long term use.
--S31-NB supports different uplink methods include (% style="color:blue" %)**TCP, MQTT, UDP** for different application requirement. and Support Uplinks to various IoT Servers.
++S31-NB supports different uplink methods include (% style="color:blue" %)**TCP, MQTT, UDP**(%%) for different application requirement. and Support Uplinks to various IoT Servers.
  S31-NB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), It is designed for long term use up to several years. (Real-world battery life depends on the use environment, update period and uplink method. Please check related Power Analyze report).
@@ -46,10 +46,12 @@
  * 8500mAh Battery for long term use
  * Nano SIM card slot for NB-IoT SIM
++
++
  == 1.3 Specification ==
--(% style="color:#037691" %)**Common DC Characteristics:**
++(% style="color:blue" %)**Common DC Characteristics:**
  * Supply Voltage: 2.1v ~~ 3.6v
  * Operating Temperature: -40 ~~ 85°C
@@ -61,7 +61,7 @@
  * Resolution: 0.1°C
  * Long Term Shift: <0.03 °C/yr
--(% style="color:#037691" %)**Humidity Sensor: **
++(% style="color:blue" %)**Humidity Sensor: **
  * Range: 0 ~~ 99.9% RH
  * Accuracy: ± 2%RH ( 0 ~~ 100%RH)
@@ -68,9 +68,9 @@
  * Resolution: 0.01% RH
  * Long Term Shift: <0.25 %RH/yr
--(% style="color:#037691" %)**NB-IoT Spec:**
++(% style="color:blue" %)**NB-IoT Spec:**
--**NB-IoT Module: BC660K-GL**
++(% style="color:#037691" %)**NB-IoT Module: BC660K-GL**
  Support Bands:
@@ -92,7 +92,7 @@
  * B70 @H-FDD: 2000MHz
  * B85 @H-FDD: 700MHz
--(% style="color:#037691" %)**Battery:**
++(% style="color:blue" %)**Battery:**
  * Li/SOCI2 un-chargeable battery
  * Capacity: 8500mAh
@@ -100,7 +100,7 @@
  * Max continuously current: 130mA
  * Max boost current: 2A, 1 second
--(% style="color:#037691" %)**Power Consumption**
++(% style="color:blue" %)**Power Consumption**
  * STOP Mode: 10uA @ 3.3v
  * Max transmit power: 350mA@3.3v
@@ -115,8 +115,6 @@
  * Smart Cities
  * Smart Factory
--
--
  == 1.5 Sleep mode and working mode ==
@@ -133,7 +133,7 @@
  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
--|=(% style="width: 167px;background-color:#D9E2F3;color:#0070C0" %)**Behavior on ACT**|=(% style="width: 117px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 225px;background-color:#D9E2F3;color:#0070C0" %)**Action**
++|=(% style="width: 167px;background-color:#4F81BD;color:white" %)**Behavior on ACT**|=(% style="width: 117px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width:225px;background-color:#4F81BD;color:white" %)**Action**
  |(% style="width:167px" %)Pressing ACT between 1s < time < 3s|(% style="width:117px" %)Send an uplink|(% style="width:225px" %)(((
  If sensor has already attached to NB-IoT network, sensor will send an uplink packet, (% style="color:blue" %)**blue led** (%%)will blink once.
  Meanwhile, BLE module will be active and user can connect via BLE to configure device.
@@ -168,7 +168,6 @@
  [[image:image-20230819104805-5.png]]
--
  === 1.8.1 Jumper JP2 ===
@@ -189,14 +189,13 @@
  Press to reboot the device.
--
  == 1.9 Hardware Variant ==
  (% border="1" cellspacing="5" style="width:410px" %)
--|=(% style="width: 102px;background-color:#D9E2F3;color:#0070C0" %)Model|=(% style="width: 126px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)Photo|=(% style="width: 179px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)Probe Info
++|=(% style="width: 102px;background-color:#4F81BD;color:white" %)Model|=(% style="width: 126px; background-color:#4F81BD;color:white" %)Photo|=(% style="width: 179px;background-color:#4F81BD;color:white" %)Probe Info
  |(% style="width:102px" %)(((
--S31-LB
++S31-NB
  )))|(% style="width:126px" %)(((
  (% style="text-align:center" %)
  [[image:image-20230819110632-6.png||height="130" width="104"]]
@@ -208,7 +208,7 @@
  )))
  |(% style="width:102px" %)(((
--S31B-LB
++S31B-NB
  )))|(% style="width:126px" %)(((
  (% style="text-align:center" %)
  [[image:image-20230819110702-7.png||height="164" width="90"]]
@@ -239,27 +239,36 @@
  There are two version: (% style="color:blue" %)**-GE**(%%) and (% style="color:blue" %)**-1D**(%%) version of S31-NB.
--(% style="color:blue" %)**GE Version**(%%): This version doesn’t include SIM card or point to any IoT server. User needs to use AT Commands to configure below two steps to set S31-NB send data to IoT server.
++(% style="color:blue" %)**GE Version**(%%): This version doesn't include SIM card or point to any IoT server. User needs to use AT Commands to configure below two steps to set S31-NB send data to IoT server.
--1. Install NB-IoT SIM card and configure APN. See instruction of [[Attach Network>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H2.AttachNetwork]].
++* Install NB-IoT SIM card and configure APN. See instruction of [[Attach Network>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H2.AttachNetwork]].
--1. Set up sensor to point to IoT Server. See instruction of [[Configure to Connect Different Servers>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.Configuretoconnecttodifferentservers]].
++* Set up sensor to point to IoT Server. See instruction of [[Configure to Connect Different Servers>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.Configuretoconnecttodifferentservers]].
  Below shows result of different server as a glance.
++(% border="1" cellspacing="4" style="width:515px" %)
++|(% style="background-color:#4f81bd; color:white; width:100px" %)**Servers**|(% style="background-color:#4f81bd; color:white; width:300px" %)**Dash Board**|(% style="background-color:#4f81bd; color:white; width:115px" %)**Comments**
++|(% style="width:127px" %)[[Node-Red>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.5A0Node-RedA028viaA0MQTT29]]|(% style="width:385px" %)(((
++(% style="text-align:center" %)
++[[image:image-20230819113244-8.png||height="183" width="367"]]
++)))|(% style="width:170px" %)
++|(% style="width:127px" %)[[DataCake>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.4Datacake]]|(% style="width:385px" %)(((
++(% style="text-align:center" %)
++[[image:image-20230819113244-9.png||height="119" width="367"]]
++)))|(% style="width:170px" %)
++|(% style="width:127px" %)[[Tago.IO>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.7A0Tago.ioA028viaA0MQTT29]]|(% style="width:385px" %) |(% style="width:170px" %)
++|(% style="width:127px" %)[[General UDP>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.1GeneralA0UDPA0Connection]]|(% style="width:385px" %)Raw Payload. Need Developer to design Dash Board|(% style="width:170px" %)
++|(% style="width:127px" %)[[General MQTT>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.2GeneralA0MQTTA0Connection]]|(% style="width:385px" %)Raw Payload. Need Developer to design Dash Board|(% style="width:170px" %)
++|(% style="width:127px" %)[[ThingSpeak>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.3A0ThingSpeakA028viaA0MQTT29]]|(% style="width:385px" %)(((
++(% style="text-align:center" %)
++[[image:image-20230819113244-10.png||height="104" width="367"]]
++)))|(% style="width:170px" %)
++|(% style="width:127px" %)[[ThingsBoard>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.6A0ThingsBoard.CloudA028viaA0MQTT29]]|(% style="width:385px" %)(((
++(% style="text-align:center" %)
++[[image:image-20230819113244-11.png||height="141" width="367"]]
++)))|(% style="width:170px" %)
--|**Servers**|**Dash Board**|**Comments**
--|[[Node-Red>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.5A0Node-RedA028viaA0MQTT29]]|[[image:image-20230819113244-8.png]]|
--|[[DataCake>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.4Datacake]]|[[image:image-20230819113244-9.png]]|
--|[[Tago.IO>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.7A0Tago.ioA028viaA0MQTT29]]| |
--|[[General UDP>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.1GeneralA0UDPA0Connection]]|Raw Payload. Need Developer to design Dash Board|
--|[[General MQTT>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.2GeneralA0MQTTA0Connection]]|Raw Payload. Need Developer to design Dash Board|
--|[[ThingSpeak>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.3A0ThingSpeakA028viaA0MQTT29]]|[[image:image-20230819113244-10.png]]|
--|[[ThingsBoard>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.6A0ThingsBoard.CloudA028viaA0MQTT29]]|[[image:image-20230819113244-11.png]]|
--| | |
--
--
--
  (% style="color:blue" %)**1D Version**(%%): This version has 1NCE SIM card pre-installed and configure to send value to DataCake. User Just need to select the sensor type in DataCake and Activate S31-NB and user will be able to see data in DataCake. See here for [[DataCake Config Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.4Datacake]].
@@ -268,52 +268,49 @@
  To meet different server requirement, S31-NB supports different payload type.
--Includes:
++**Includes:**
--* [[General JSON format payload>>path:#General_Json]]. (Type=5)
--* [[HEX format Payload>>path:#HEX_Payload]]. (Type=0)
--* [[ThingSpeak Format>>path:#ThingSpeak_Payload]]. (Type=1)
--* [[ThingsBoard Format>>path:#ThingsBoard_Payload]]. (Type=3)
++* [[General JSON format payload>>||anchor="H2.2.1GeneralJsonFormat28Type3D529"]]. (Type=5)
++* [[HEX format Payload>>||anchor="H2.2.2HEXformatPayload28Type3D029"]]. (Type=0)
--User can specify the payload type when choose the connection protocol. Example:
++* [[ThingSpeak Format>>||anchor="H2.2.4ThingSpeakPayload28Type3D129"]]. (Type=1)
--(% style="color:#037691" %)**AT+PRO=2,0**  (%%)          ~/~/Use UDP Connection & hex Payload
++* [[ThingsBoard Format>>||anchor="H2.2.3ThingsBoardPayload28Type3D329"]]. (Type=3)
--(% style="color:#037691" %)**AT+PRO=2,5**   (%%)         ~/~/ Use UDP Connection & Json Payload
++User can specify the payload type when choose the connection protocol. Example:
--(% style="color:#037691" %)**AT+PRO=3,5 **  (%%)        ~/~/ Use MQTT Connection & Json Payload
++(% style="color:#037691" %)**AT+PRO=2,0**  (%%)          ~/~/ Use UDP Connection & hex Payload
++(% style="color:#037691" %)**AT+PRO=2,5**   (%%)         ~/~/ Use UDP Connection & Json Payload
--=== 2.2.1 General Json Format (Type=5) ===
++(% style="color:#037691" %)**AT+PRO=3,5 **  (%%)         ~/~/ Use MQTT Connection & Json Payload
--This is the General Json Format. As below:
++=== 2.2.1 General Json Format(Type~=5) ===
--(% style="color:#4472C4" %)**{"IMEI":866207053462762,"temperature":29.2,"humidity":54.2,"battery":3.27,"signal":24,"Model":S31x-NB, "1":{28.2,48.3,2023/08/10 08:00:37},"2":{28.1,49.1,2023/08/10 07:57:37},"3":{28.1,48.5,2023/08/10 07:54:37},"4":{28.2,48.6,2023/08/10 07:51:37},"5":{28.1,48.9,2023/08/10 07:48:37},"6":{28.2,48.8,2023/08/10 07:45:37},"7":{28.2,48.8,2023/08/10 07:42:37},"8":{28.0,48.8,2023/08/10 07:39:37}}**
++This is the General Json Format. As below:
++(% style="color:#4472c4" %)**{"IMEI":866207053462762,"temperature":29.2,"humidity":54.2,"battery":3.27,"signal":24,"Model":S31x-NB, "1":{28.2,48.3,2023/08/10 08:00:37},"2":{28.1,49.1,2023/08/10 07:57:37},"3":{28.1,48.5,2023/08/10 07:54:37},"4":{28.2,48.6,2023/08/10 07:51:37},"5":{28.1,48.9,2023/08/10 07:48:37},"6":{28.2,48.8,2023/08/10 07:45:37},"7":{28.2,48.8,2023/08/10 07:42:37},"8":{28.0,48.8,2023/08/10 07:39:37}}**
--(% style="color:red" %)Notice, from above payload:
++(% style="color:red" %)**Notice, from above payload:**
++
  * Temperature , Humidity , Battery & Signal are the value at uplink time.
  * Json entry 1 ~~ 8 are the last 1 ~~ 8 sampling data as specify by (% style="color:#037691" %)**AT+NOUD=8 ** (%%)Command. Each entry includes (from left to right): Temperature, Humidity, Sampling time.
++=== 2.2.2 HEX format Payload(Type~=0) ===
--
--=== 2.2.2 HEX format Payload(Type=0) ===
--
--
  This is the HEX Format. As below:
--(% style="color:#4472C4" %)**f86620705346276200640cba16010000000011011801e864d49c2d011a01e364d49925011901eb64d49871011901e564d497bd011a01e664d49709011901e964d49655011a01e864d495a1011a01e864d494ed011801e864d49439**
++(% style="color:#4472c4" %)**f86620705346276200640cba16010000000011011801e864d49c2d011a01e364d49925011901eb64d49871011901e564d497bd011a01e664d49709011901e964d49655011a01e864d495a1011a01e864d494ed011801e864d49439**
++[[image:1692424009971-458.png]]
--[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image001.png]]
--
  (% style="color:blue" %)**Version:**
  These bytes include the hardware and software version.
@@ -323,7 +323,7 @@
  (% style="color:#037691" %)**Lower byte:**(%%) Specify the software version: 0x64=100, means firmware version 100
--(% style="color:#037691" %)**BAT (Battery Info):**
++(% style="color:blue" %)**BAT (Battery Info):**
  Ex1: 0x0CBA = 3258mV
@@ -351,10 +351,9 @@
  If payload is: FF3FH :  (FF3F & 8000 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
--(FF3F & 8000：Judge whether the highest bit is 1, when the highest bit is 1, it is negative)
++(FF3F & 8000: Judge whether the highest bit is 1, when the highest bit is 1, it is negative)
--
  (% style="color:blue" %)**Humidity:   **
  Read:0295(H)=661(D)    Value:  661 / 10=66.1, So 66.1%
@@ -367,24 +367,24 @@
  Put the decimal value into this link(https:~/~/www.epochconverter.com/) to get the time.
--=== 2.2.3 ThingsBoard Payload(Type=3) ===
++=== 2.2.3 ThingsBoard Payload(Type~=3) ===
++
  Type3 payload special design for ThingsBoard, it will also configure other default server to ThingsBoard.
++(% style="color:#4472c4" %)**{"IMEI":866207053462762,"temperature":29.2,"humidity":54.2,"battery":3.27,"signal":24}**
--(% style="color:#4472C4" %)**{"IMEI":866207053462762,"temperature":29.2,"humidity":54.2,"battery":3.27,"signal":24}**
++=== 2.2.4 ThingSpeak Payload(Type~=1) ===
--=== 2.2.4 ThingSpeak Payload(Type=1) ===
  This payload meets ThingSpeak platform requirement. It includes only four fields. Form 1~~4 are:
  Temperature, Humidity, Battery & Signal. This payload type only valid for ThingsSpeak Platform
--
  As below:
--(% style="color:#4472C4" %)**field1=27.9&field2=49.9&field3=3.23&field4=28**
++(% style="color:#4472c4" %)**field1=27.9&field2=49.9&field3=3.23&field4=28**
  == 2.3 Test Uplink and Change Update Interval ==
@@ -392,34 +392,30 @@
  By default, Sensor will send uplinks (% style="color:blue" %)**every 2 hours**(%%) & AT+NOUD=8
--
  User can use below commands to change the (% style="color:blue" %)**uplink interval**.
--(% style="color:#037691" %)**~         AT+TDC=600      ** (%%)      ~/~/ Set Update Interval to 600s
++(% style="color:#037691" %)**AT+TDC=600 ** (%%)      ~/~/ Set Update Interval to 600s
--
  User can also push the button for more than 1 seconds to activate an uplink.
--
--
  == 2.4 Multi-Samplings and One uplink ==
  To save battery life, S31-NB will sample temperature & humidity data every 15 minutes and send one uplink every 2 hours. So each uplink it will include 8 stored data + 1 real-time data. They are defined by:
--* (% style="color:#037691" %)**AT+TR=900**   (%%)  ~/~/  The unit is seconds, and the default is to record data once every 900 seconds (15 minutes, the minimum can be set to 180 seconds)
++* (% style="color:#037691" %)**AT+TR=900**   (%%)     ~/~/ The unit is seconds, and the default is to record data once every 900 seconds (15 minutes, the minimum can be set to 180 seconds)
--* (% style="color:#037691" %)**AT+NOUD=8**  (%%)~/~/   The device uploads 8 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
++* (% style="color:#037691" %)**AT+NOUD=8**     (%%)~/~/  The device uploads 8 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
--
  The diagram below explains the relationship between TR, NOUD, and TDC more clearly:
--[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image001.png||alt="IMG_256"]]
++[[image:1692424376354-959.png]]
  == 2.5 Humidity and Temperature alarm function ==
++
  On each sampling define by AT+TR ( default 900s or 15 minutes), when the value exceed the range, it will trigger an Alarm and immediately sends a uplink.
@@ -427,12 +427,12 @@
  (% style="color:#037691" %)**AT+ SHHUM=min,max**
--Example: AT+ SHHUM=50,80 ~/~/ Alarm when humidity lower than 50 or higher than 80.
++Example: AT+ SHHUM=50,80     ~/~/ Alarm when humidity lower than 50 or higher than 80.
  (% style="color:#037691" %)**AT+ SHTEMP=min,max**
--Example: AT+ SHTEMP=20,30 ~/~/ Alarm when temperature lower than 20 or higher than 30
++Example: AT+ SHTEMP=20,30   ~/~/ Alarm when temperature lower than 20 or higher than 30
  (% style="color:red" %)**Notice:**
@@ -441,292 +441,185 @@
  * If user only want to send only min or max, user can set the alarm to a value that device won’t reach. For example: (% style="color:#037691" %)**AT+SHTEMP=-80,0.**
++== 2.6 Trggier an uplink by external interrupt ==
--1.
--11. Trggier an uplink by external interrupt
  S31-NB has an external trigger interrupt function. Users can use the PB15 pin to trigger the upload of data packets.
--AT command:
++(% style="color:blue" %)**AT command:**
--* AT+INTMOD   ~/~/ Set the trigger interrupt mode
--* AT+INTMOD=0    ~/~/Disable Interrupt
--* AT+INTMOD=1   ~/~/Trigger by rising and falling edge
--* AT+INTMOD=2   ~/~/Trigger by falling edge
--* AT+INTMOD=3    ~/~/Trigger by rising edge
++* (% style="color:#037691" %)**AT+INTMOD **(%%)        ~/~/ Set the trigger interrupt mode
++* (% style="color:#037691" %)**AT+INTMOD=0 **(%%)   ~/~/ Disable Interrupt
--= 3. Configure S31x-LB =
++* (% style="color:#037691" %)**AT+INTMOD=1 **(%%)   ~/~/ Trigger by rising and falling edge
--== 3.1 Configure Methods ==
++* (% style="color:#037691" %)**AT+INTMOD=2 **(%%)   ~/~/ Trigger by falling edge
++* (% style="color:#037691" %)**AT+INTMOD=3  **(%%)  ~/~/ Trigger by rising edge
--S31x-LB supports below configure method:
++= 3. Configure S31x-NB =
--* AT Command via Bluetooth Connection (**Recommended**): [[BLE Configure Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
--* AT Command via UART Connection : See [[UART Connection>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H2.3UARTConnectionforSN50v3basemotherboard]].
--* LoRaWAN Downlink.  Instruction for different platforms: See [[IoT LoRaWAN Server>>http://wiki.dragino.com/xwiki/bin/view/Main/]] section.
++== 3.1 Configure Methods ==
--== 3.2 General Commands ==
++S31x-NB supports below configure method:
--These commands are to configure:
++* AT Command via Bluetooth Connection (**Recommended**): [[BLE Configure Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
--* General system settings like: uplink interval.
--* LoRaWAN protocol & radio related command.
++* AT Command via UART Connection : See [[UART Connection>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H2.3UARTConnectionforSN50v3basemotherboard]].
--They are same for all Dragino Devices which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:
++== 3.2 AT Commands Set ==
--[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
++AT+<CMD>?           : Help on <CMD>
--== 3.3 Commands special design for S31x-LB ==
++AT+<CMD>                      : Run <CMD>
++AT+<CMD>=<value>      : Set the value
--These commands only valid for S31x-LB, as below:
++AT+<CMD>=?          : Get the value
--=== 3.3.1 Set Transmit Interval Time ===
++(% style="color:blue" %)**General Commands**
++AT                    : Attention
--Feature: Change LoRaWAN End Node Transmit Interval.
++AT?                  : Short Help
--(% style="color:blue" %)**AT Command: AT+TDC**
++ATZ                 : MCU Reset
--(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
--|=(% style="width: 156px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 137px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="background-color:#D9E2F3;color:#0070C0" %)**Response**
--|(% style="width:156px" %)AT+TDC=?|(% style="width:137px" %)Show current transmit Interval|(((
--30000
--OK
--the interval is 30000ms = 30s
--)))
--|(% style="width:156px" %)AT+TDC=60000|(% style="width:137px" %)Set Transmit Interval|(((
--OK
--Set transmit interval to 60000ms = 60 seconds
--)))
++AT+TDC          : Application Data Transmission Interval
--(% style="color:blue" %)**Downlink Command: 0x01**
++AT+CFG          : Print all configurations
--Format: Command Code (0x01) followed by 3 bytes time value.
++AT+CFGMOD           : Working mode selection
--If the downlink payload=0100003C, it means set the END Node's Transmit Interval to 0x00003C=60(S), while type code is 01.
++AT+DEUI                  : Get or set the Device ID
--* Example 1: Downlink Payload: 0100001E       ~/~/  Set Transmit Interval (TDC) = 30 seconds
--* Example 2: Downlink Payload: 0100003C       ~/~/  Set Transmit Interval (TDC) = 60 seconds
++AT+INTMOD            : Set the trigger interrupt mode
--=== 3.3.2 Get Device Status ===
++AT+5VT           : Set extend the time of 5V power
++AT+PRO          : Choose agreement
--Send a LoRaWAN downlink to ask device send Alarm settings.
++AT+RXDL        : Extend the sending and receiving time
--(% style="color:blue" %)**Downlink Payload:  **(%%)0x26 01
++AT+DNSCFG   : Get or Set DNS Server
--Sensor will upload Device Status via FPORT=5. See payload section for detail.
++AT+GETSENSORVALUE   : Returns the current sensor measurement
++AT+NOUD  : Get or Set the number of data to be uploaded
--=== 3.3.3 Set Temperature Alarm Threshold ===
++AT+CDP     : Read or Clear cached data
++AT+SHTEMP:   Get or Set alarm of temp
--* (% style="color:blue" %)**AT Command:**
++AT+SHHUM:   Get or Set alarm of moisture
--(% style="color:#037691" %)**AT+SHTEMP=min,max**
++AT+SERVADDR :   Server Address
--* When min=0, and max≠0, Alarm higher than max
--* When min≠0, and max=0, Alarm lower than min
--* When min≠0 and max≠0, Alarm higher than max or lower than min
--Example:
++(% style="color:blue" %)**UDP Management**
--   AT+SHTEMP=0,30   ~/~/ Alarm when temperature higher than 30.
++AT+CFM  :    Upload confirmation mode (only valid for UDP)
--* (% style="color:blue" %)**Downlink Payload:**
--(% style="color:#037691" %)**0x(0C 01 00 1E)**  (%%)     ~/~/ Set AT+SHTEMP=0,30
++(% style="color:blue" %)**MQTT Management**
--(% style="color:red" %)**(note: 3^^rd^^ byte= 0x00 for low limit(not set), 4^^th^^ byte = 0x1E for high limit: 30)**
++AT+CLIENT               : Get or Set MQTT client
++AT+UNAME              : Get or Set MQTT Username
--=== 3.3.4 Set Humidity Alarm Threshold ===
++AT+PWD                  : Get or Set MQTT password
++AT+PUBTOPIC          : Get or Set MQTT publish topic
--* (% style="color:blue" %)**AT Command:**
++AT+SUBTOPIC          : Get or Set MQTT subscription topic
--(% style="color:#037691" %)**AT+SHHUM=min,max**
--* When min=0, and max≠0, Alarm higher than max
--* When min≠0, and max=0, Alarm lower than min
--* When min≠0 and max≠0, Alarm higher than max or lower than min
++(% style="color:blue" %)**Information**
--Example:
++AT+FDR              : Factory Data Reset
--   AT+SHHUM=70,0      ~/~/ Alarm when humidity lower than 70%.
++AT+PWORD        : Serial Access Password
--* (% style="color:blue" %)**Downlink Payload:**
++AT+LDATA           : Get the last upload data
--(% style="color:#037691" %)**0x(0C 02 46 00)**(%%)         ~/~/ Set AT+SHTHUM=70,0
++AT+CDP               : Read or Clear cached data
--(% style="color:red" %)**(note: 3^^rd^^ byte= 0x46 for low limit (70%), 4^^th^^ byte = 0x00 for high limit (not set))**
--
--=== 3.3.5 Set Alarm Interval ===
--
--
--The shortest time of two Alarm packet. (unit: min)
--
--* (% style="color:blue" %)**AT Command:**
--
--(% style="color:#037691" %)**AT+ATDC=30** (%%)      ~/~/ The shortest interval of two Alarm packets is 30 minutes, Means is there is an alarm packet uplink, there won't be another one in the next 30 minutes.
--
--* (% style="color:blue" %)**Downlink Payload:**
--
--(% style="color:#037691" %)**0x(0D 00 1E)**(%%)     **~-~--> ** Set AT+ATDC=0x 00 1E = 30 minutes
--
--
--=== 3.3.6 Get Alarm settings ===
--
--
--Send a LoRaWAN downlink to ask device send Alarm settings.
--
--* (% style="color:#037691" %)**Downlink Payload:  **(%%)0x0E 01
--
--**Example:**
--
--[[image:image-20230524110211-4.png]]
--
--**Explain:**
--
--* Alarm & MOD bit is 0x7C, 0x7C >> 2 = 0x31: Means this message is the Alarm settings message.
--
--=== 3.3.7 Set Interrupt Mode ===
--
--
--Feature, Set Interrupt mode for PA8 of pin.
--
--When AT+INTMOD=0 is set, PA8 is used as a digital input port.
--
--(% style="color:blue" %)**AT Command: AT+INTMOD**
--
--(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
--|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 197px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Response**
--|(% style="width:154px" %)AT+INTMOD=?|(% style="width:196px" %)Show current interrupt mode|(% style="width:157px" %)(((
--0
--OK
--the mode is 0 =Disable Interrupt
--)))
--|(% style="width:154px" %)AT+INTMOD=2|(% style="width:196px" %)(((
--Set Transmit Interval
--0. (Disable Interrupt),
--~1. (Trigger by rising and falling edge)
--2. (Trigger by falling edge)
--3. (Trigger by rising edge)
--)))|(% style="width:157px" %)OK
--
--(% style="color:blue" %)**Downlink Command: 0x06**
--
--Format: Command Code (0x06) followed by 3 bytes.
--
--This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
--
--* Example 1: Downlink Payload: 06000000       ~/~/  Turn off interrupt mode
--* Example 2: Downlink Payload: 06000003      ~/~/   Set the interrupt mode to rising edge trigger
--
--=== 3.3.8 Set Power Output Duration ===
--
--
--Control the output duration 5V . Before each sampling, device will
--
--~1. first enable the power output to external sensor,
--
--2. keep it on as per duration, read sensor value and construct uplink payload
--
--3. final, close the power output.
--
--(% style="color:blue" %)**AT Command: AT+5VT**
--
--(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
--|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 197px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Response**
--|(% style="width:154px" %)AT+5VT=?|(% style="width:196px" %)Show 5V open time.|(% style="width:157px" %)0 (default)
--OK
--|(% style="width:154px" %)AT+5VT=1000|(% style="width:196px" %)Close after a delay of 1000 milliseconds.|(% style="width:157px" %)OK
--
--(% style="color:blue" %)**Downlink Command: 0x07**
--
--Format: Command Code (0x07) followed by 2 bytes.
--
--The first and second bytes are the time to turn on.
--
--* Example 1: Downlink Payload: 070000     **~-~-->**   AT+5VT=0
--* Example 2: Downlink Payload: 0701F4      **~-~-->**  AT+5VT=500
--
  = 4. Battery & Power Consumption =
--S31x-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
++S31x-NB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
  [[**Battery Info & Power Consumption Analyze**>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
--= 5. OTA Firmware update =
++= 5. Firmware update =
--(% class="wikigeneratedid" %)
--User can change firmware S31x-LB to:
++User can change device firmware to::
--* Change Frequency band/ region.
  * Update with new features.
++
  * Fix bugs.
--Firmware and changelog can be downloaded from : **[[Firmware download link>>https://www.dropbox.com/sh/fis3g6nmhv0eokg/AAC6BcCZaX4BdqZkduUvZ3jIa?dl=0]]**
++Firmware and changelog can be downloaded from : **[[Firmware download link>>https://www.dropbox.com/sh/fhb3uyl4gt6clru/AAAiZVTFcxrfE1JOOyfcgO9ha?dl=0]]**
--
  Methods to Update Firmware:
--* (Recommanded way) OTA firmware update via wireless : **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]**
++* (Recommended way) OTA firmware update via BLE: [[**Instruction**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/BLE_Firmware_Update_NB_Sensors_BC660K-GL/]].
++
  * Update through UART TTL interface : **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
++
  = 6. FAQ =
++== 6.1 How can I access t BC660K-GL AT Commands? ==
--= 7. Order Info =
++User can access to BC660K-GL directly and send AT Commands.
++[[See BC660K-GL AT Command set>>url:https://www.dropbox.com/sh/5f6ssda5fum8rvs/AABT68l8ZzWOvZ5eg2qwOoFda?dl=0]]
--Part Number: (% style="color:blue" %)**S31-LB-XX  / S31B-LB-XX**
--(% style="color:red" %)**XX**(%%): The default frequency band
--* (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
++= 7. Order Info =
--* (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
--* (% style="color:red" %)**EU433**(%%): LoRaWAN EU433 band
++Part Number: (% style="color:blue" %)**S31-NB-XX  / S31B-NB-XX**
--* (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
++(% style="color:red" %)**XX**(%%):
--* (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
++* (% style="color:#037691" %)**GE**(%%): General version ( Exclude SIM card)
--* (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
++* (% style="color:#037691" %)**1D**(%%): with 1NCE* 10 years 500MB SIM card and Pre-configure to DataCake server
--* (% style="color:red" %)**IN865**(%%): LoRaWAN IN865 band
++(% style="color:#037691" %)*** 1NCE SIM Card NB-IoT network coverage**(%%): Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Finland, Germany, Great Britain, Greece, Hungary, Ireland, Italy, Latvia, Malta, Netherlands, Norway, Puerto Rico, Russia, Slovak , Republic, Slovenia, Spain, Sweden, Switzerland, Taiwan, USA, US Virgin Islands
--* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
++
  = 8. Packing Info =
  (% style="color:#037691" %)**Package Includes**:
--* S31x-LB LoRaWAN Temperature & Humidity Sensor
++* S31-NB or S31-NB NB-IoT Sensor Node x 1
++* External antenna x 1
++
++
  (% style="color:#037691" %)**Dimension and weight**:
--* Device Size: cm
++* Device Size: 13.0 x 5 x 4.5 cm
--* Device Weight: g
++* Device Weight: 150g
--* Package Size / pcs : cm
++* Package Size / pcs : 14.0 x 8x 5 cm
--* Weight / pcs : g
++* Weight / pcs : 180g
  = 9. Support =
@@ -735,4 +735,4 @@
  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[Support@dragino.cc>>mailto:Support@dragino.cc]].
--(% style="display:none" %) (%%)
++(% style="display:none" %)  (%%)

1692424009971-458.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+147.4 KB

Content

1692424376354-959.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+146.1 KB

Content

Changes for page wiki_test

Summary

Details

Applications

Navigation