Changes for page wiki_test

Last modified by Mengting Qiu on 2024/09/05 17:35

From 75.1 to 74.1 From 80.4 to 80.3

From version 80.3

edited by Xiaoling
on 2023/08/19 11:37

Change comment: There is no comment for this version

To version 75.1

edited by Xiaoling
on 2023/08/19 11:07

Change comment: Uploaded new attachment "image-20230819110702-7.png", version {1}

Raw
Rendered

Summary

Page properties (1 modified, 0 added, 0 removed)
Attachments (0 modified, 0 added, 5 removed)

Details

Page properties

Content

@@ -21,7 +21,7 @@
  The temperature & humidity sensor used in S31-NB is SHT31, which is fully calibrated, linearized, and temperature compensated digital output from Sensirion, it provides a strong reliability and long-term stability. The SHT31 is fixed in a (% style="color:blue" %)**waterproof anti-condensation casing**(%%) for long term use.
--S31-NB supports different uplink methods include (% style="color:blue" %)**TCP, MQTT, UDP** for different application requirement. and Support Uplinks to various IoT Servers.
++S31-NB supports different uplink methods include (% style="color:blue" %)**TCP, MQTT, UDP** for different application requirement. and Support Uplinks to various IoT Servers.
  S31-NB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), It is designed for long term use up to several years. (Real-world battery life depends on the use environment, update period and uplink method. Please check related Power Analyze report).
@@ -46,6 +46,7 @@
  * 8500mAh Battery for long term use
  * Nano SIM card slot for NB-IoT SIM
++
  == 1.3 Specification ==
@@ -105,6 +105,7 @@
  * STOP Mode: 10uA @ 3.3v
  * Max transmit power: 350mA@3.3v
++
  == 1.4 Applications ==
@@ -117,6 +117,7 @@
++
  == 1.5 Sleep mode and working mode ==
@@ -145,6 +145,7 @@
  )))
  |(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means device is in Deep Sleep Mode.
++
  == 1.7 BLE connection ==
@@ -185,7 +185,6 @@
  === 1.8.3 Reset Button ===
--
  Press to reboot the device.
@@ -193,26 +193,20 @@
  == 1.9 Hardware Variant ==
--(% border="1" cellspacing="5" style="width:410px" %)
--|=(% style="width: 102px;background-color:#D9E2F3;color:#0070C0" %)Model|=(% style="width: 126px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)Photo|=(% style="width: 179px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)Probe Info
++(% border="1" cellspacing="5" style="width:472px" %)
++|=(% style="width: 102px;background-color:#D9E2F3;color:#0070C0" %)Model|=(% style="width: 190px;background-color:#D9E2F3;color:#0070C0" %)Photo|=(% style="width: 187px; background-color:#D9E2F3;color:#0070C0" %)Probe Info
  |(% style="width:102px" %)(((
  S31-LB
--)))|(% style="width:126px" %)(((
--(% style="text-align:center" %)
--[[image:image-20230819110632-6.png||height="130" width="104"]]
--)))|(% style="width:179px" %)(((
++)))|(% style="width:190px" %)[[image:image-20230527093214-2.jpeg]]|(% style="width:187px" %)(((
 x SHT31 Probe
--Cable Length : 3 meters
++Cable Length : 2 meters
  )))
  |(% style="width:102px" %)(((
  S31B-LB
--)))|(% style="width:126px" %)(((
--(% style="text-align:center" %)
--[[image:image-20230819110702-7.png||height="164" width="90"]]
--)))|(% style="width:179px" %)(((
++)))|(% style="width:190px" %)[[image:image-20230527093155-1.jpeg]]|(% style="width:187px" %)(((
 x SHT31 Probe
  Installed in device.
@@ -222,245 +222,401 @@
++== 1.9 Mechanical ==
--= 2. Use S31-NB to communicate with IoT Server =
--== 2.1 Send data to IoT server via NB-IoT network ==
++[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143884058-338.png]]
--The S31-NB is equipped with a NB-IoT module, the pre-loaded firmware in S31-NB will get environment data from sensors and send the value to local NB-IoT network via the NB-IoT module.  The NB-IoT network will forward this value to IoT server via the protocol defined by S31-NB.
++[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143899218-599.png]]
--Below shows the network structure:
++[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143909447-639.png]]
--[[image:1692415924540-357.png]]
++= 2. Configure S31x-LB to connect to LoRaWAN network =
--There are two version: **-GE** and **-1D** version of S31-NB.
++== 2.1 How it works ==
--**GE Version**: This version doesn’t include SIM card or point to any IoT server. User needs to use AT Commands to configure below two steps to set S31-NB send data to IoT server.
++The S31x-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the S31x-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
--1. Install NB-IoT SIM card and configure APN. See instruction of [[Attach Network>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H2.AttachNetwork]].
--1. Set up sensor to point to IoT Server. See instruction of [[Configure to Connect Different Servers>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.Configuretoconnecttodifferentservers]].
--Below shows result of different server as a glance.
++== 2.2 Quick guide to connect to LoRaWAN server (OTAA) ==
--|**Servers**|**Dash Board**|**Comments**
--|[[Node-Red>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.5A0Node-RedA028viaA0MQTT29]]|[[image:image-20230819113244-8.png]]|
--|[[DataCake>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.4Datacake]]|[[image:image-20230819113244-9.png]]|
--|[[Tago.IO>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.7A0Tago.ioA028viaA0MQTT29]]| |
--|[[General UDP>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.1GeneralA0UDPA0Connection]]|Raw Payload. Need Developer to design Dash Board|
--|[[General MQTT>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.2GeneralA0MQTTA0Connection]]|Raw Payload. Need Developer to design Dash Board|
--|[[ThingSpeak>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.3A0ThingSpeakA028viaA0MQTT29]]|[[image:image-20230819113244-10.png]]|
--|[[ThingsBoard>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.6A0ThingsBoard.CloudA028viaA0MQTT29]]|[[image:image-20230819113244-11.png]]|
--| | |
++Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]]  as a LoRaWAN gateway in this example.
++The LPS8V2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
--**1D Version**: This version has 1NCE SIM card pre-installed and configure to send value to DataCake. User Just need to select the sensor type in DataCake and Activate S31-NB and user will be able to see data in DataCake. See here for [[DataCake Config Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.4Datacake]].
++(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from S31x-LB.
++Each S31x-LB is shipped with a sticker with the default device EUI as below:
--== 2.2 Payload Types ==
++[[image:image-20230426084152-1.png||alt="图片-20230426084152-1.png" height="233" width="502"]]
--To meet different server requirement, S31-NB supports different payload type.
++You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:
--Includes:
--* [[General JSON format payload>>path:#General_Json]]. (Type=5)
--* [[HEX format Payload>>path:#HEX_Payload]]. (Type=0)
--* [[ThingSpeak Format>>path:#ThingSpeak_Payload]]. (Type=1)
--* [[ThingsBoard Format>>path:#ThingsBoard_Payload]]. (Type=3)
++(% style="color:blue" %)**Register the device**
++[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/1654935135620-998.png?rev=1.1||alt="1654935135620-998.png"]]
--User can specify the payload type when choose the connection protocol. Example:
--**AT+PRO=2,0** ~/~/Use UDP Connection & hex Payload
++(% style="color:blue" %)**Add APP EUI and DEV EUI**
--**AT+PRO=2,5** ~/~/ Use UDP Connection & Json Payload
++[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-4.png?width=753&height=551&rev=1.1||alt="图片-20220611161308-4.png"]]
--**AT+PRO=3,5 **~/~/ Use MQTT Connection & Json Payload
++(% style="color:blue" %)**Add APP EUI in the application**
--1.
--11.
--111. General Json Format (Type=5)
--This is the General Json Format. As below:
++[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-5.png?width=742&height=601&rev=1.1||alt="图片-20220611161308-5.png"]]
--**{"IMEI":866207053462762,"temperature":29.2,"humidity":54.2,"battery":3.27,"signal":24,"Model":S31x-NB, "1":{28.2,48.3,2023/08/10 08:00:37},"2":{28.1,49.1,2023/08/10 07:57:37},"3":{28.1,48.5,2023/08/10 07:54:37},"4":{28.2,48.6,2023/08/10 07:51:37},"5":{28.1,48.9,2023/08/10 07:48:37},"6":{28.2,48.8,2023/08/10 07:45:37},"7":{28.2,48.8,2023/08/10 07:42:37},"8":{28.0,48.8,2023/08/10 07:39:37}}**
++(% style="color:blue" %)**Add APP KEY**
++[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-6.png?width=744&height=485&rev=1.1||alt="图片-20220611161308-6.png"]]
--Notice, from above payload:
++(% style="color:blue" %)**Step 2:**(%%) Activate on S31x-LB
--* Temperature , Humidity , Battery & Signal are the value at uplink time.
--* Json entry 1 ~~ 8 are the last 1 ~~ 8 sampling data as specify by **AT+NOUD=8 **Command**.** Each entry includes (from left to right): Temperature, Humidity, Sampling time.
++Press the button for 5 seconds to activate the S31x-LB.
++(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:blue" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network. (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
++After join success, it will start to upload messages to TTN and you can see the messages in the panel.
--1.
--11.
--111. HEX format Payload(Type=0)
++== 2.3 Uplink Payload ==
--This is the HEX Format. As below:
++=== 2.3.1 Device Status, FPORT~=5 ===
--**f86620705346276200640cba16010000000011011801e864d49c2d011a01e364d49925011901eb64d49871011901e564d497bd011a01e664d49709011901e964d49655011a01e864d495a1011a01e864d494ed011801e864d49439**
++Users can use the downlink command(**0x26 01**) to ask S31x-LB to send device configure detail, include device configure status. S31x-LB will uplink a payload via FPort=5 to server.
--[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image001.png]]
++The Payload format is as below.
--**Version:**
++(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
++|(% colspan="6" style="background-color:#d9e2f3; color:#0070c0" %)**Device Status (FPORT=5)**
++|(% style="width:103px" %)**Size (bytes)**|(% style="width:72px" %)**1**|**2**|(% style="width:91px" %)**1**|(% style="width:86px" %)**1**|(% style="width:44px" %)**2**
++|(% style="width:103px" %)**Value**|(% style="width:72px" %)Sensor Model|Firmware Version|(% style="width:91px" %)Frequency Band|(% style="width:86px" %)Sub-band|(% style="width:44px" %)BAT
--These bytes include the hardware and software version.
++Example parse in TTNv3
--**Higher byte:** Specify Sensor Model: 0x00 for S31B-NB & S31-NB
++[[image:image-20230524144422-1.png||height="174" width="1080"]]
--**Lower byte:** Specify the software version: 0x64=100, means firmware version 100
++(% style="color:#037691" %)**Sensor Model**(%%): For S31x-LB, this value is 0x0A
--**BAT (Battery Info)**
++(% style="color:#037691" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
--Ex1: 0x0CBA = 3258mV
++(% style="color:#037691" %)**Frequency Band**:
++0x01: EU868
--**Signal Strength**
++0x02: US915
--NB-IoT Network signal Strength.
++0x03: IN865
--**Ex1: 0x16 = 22**
++0x04: AU915
--**0**        -113dBm or less
++0x05: KZ865
--**1**        -111dBm
++0x06: RU864
--**2...30** -109dBm... -53dBm
++0x07: AS923
--**31**      -51dBm or greater
++0x08: AS923-1
--**99**      Not known or not detectable
++0x09: AS923-2
++0x0a: AS923-3
--**Temperature: **
++0x0b: CN470
++0x0c: EU433
++
++0x0d: KR920
++
++0x0e: MA869
++
++
++(% style="color:#037691" %)**Sub-Band**:
++
++AU915 and US915:value 0x00 ~~ 0x08
++
++CN470: value 0x0B ~~ 0x0C
++
++Other Bands: Always 0x00
++
++
++(% style="color:#037691" %)**Battery Info**:
++
++Check the battery voltage.
++
++Ex1: 0x0B45 = 2885mV
++
++Ex2: 0x0B49 = 2889mV
++
++
++=== 2.3.2  Sensor Data. FPORT~=2 ===
++
++
++Sensor Data is uplink via FPORT=2
++
++(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)
++|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)(((
++**Size(bytes)**
++)))|=(% style="width: 40px;background-color:#D9E2F3;color:#0070C0" %)2|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)4|=(% style="width: 150px; background-color: #D9E2F3;color:#0070C0" %)1|=(% style="width: 80px; background-color: #D9E2F3;color:#0070C0" %)**2**|=(% style="width: 80px; background-color: #D9E2F3;color:#0070C0" %)2
++|(% style="width:99px" %)Value|(% style="width:69px" %)(((
++Battery
++)))|(% style="width:130px" %)(((
++Unix TimeStamp
++)))|(% style="width:194px" %)(((
++Alarm Flag & MOD& Level of PA8
++)))|(% style="width:106px" %)(((
++Temperature
++)))|(% style="width:97px" %)(((
++Humidity
++)))
++
++[[image:image-20230524144456-2.png||height="180" width="1142"]]
++
++
++==== (% style="color:#4472c4" %)**Battery**(%%) ====
++
++Sensor Battery Level.
++
++Ex1: 0x0B45 = 2885mV
++
++Ex2: 0x0B49 = 2889mV
++
++
++==== (% style="color:#4472c4" %)**Temperature**(%%) ====
++
++**Example**:
++
  If payload is: 0105H:  (0105 & 8000 == 0), temp = 0105H /10 = 26.1 degree
  If payload is: FF3FH :  (FF3F & 8000 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
--(FF3F & 8000：Judge whether the highest bit is 1, when the highest bit is 1, it is negative)
++（FF3F & 8000：Judge whether the highest bit is 1, when the highest bit is 1, it is negative）
++==== (% style="color:#4472c4" %)**Humidity**(%%) ====
--**Humidity:   **
--Read:0295(H)=661(D)    Value:  661 / 10=66.1, So 66.1%
++Read:0x(0197)=412    Value:  412 / 10=41.2, So 41.2%
--**TimeStamp:   **
++==== (% style="color:#4472c4" %)**Alarm Flag & MOD & Level of PA8**(%%) ====
--Unit TimeStamp Example: 64d49439(H) = 1691653177(D)
--Put the decimal value into this link(https:~/~/www.epochconverter.com/) to get the time.
++**Example:**
++If payload & 0x01 = 0x01  **~-~->** This is an Alarm Message.It means that the temperature and humidity exceed the alarm value or trigger an interrupt.
--1.
--11.
--111. ThingsBoard Payload(Type=3)
++If payload & 0x01 = 0x00  **~-~->** This is a normal uplink message, no alarm.
--Type3 payload special design for ThingsBoard, it will also configure other default server to ThingsBoard.
++If payload & 0x80>>7 = 0x01  **~-~->** The PA8 is low level.
++If payload & 0x80>>7 =0x00  **~-~->** The PA8 is high level.
--**{"IMEI":866207053462762,"temperature":29.2,"humidity":54.2,"battery":3.27,"signal":24}**
++If payload >> 2 = 0x00     **~-~->**  means MOD=1, This is a sampling uplink message.
++If payload >> 2 = 0x31     **~-~->**  means MOD=31, this message is a reply message for polling, this message contains the alarm settings. see [[this link>>path:#HPolltheAlarmsettings:]] for detail.
--1.
--11.
--111. ThingSpeak Payload(Type=1)
--This payload meets ThingSpeak platform requirement. It includes only four fields. Form 1~~4 are:
++== 2.4 Payload Decoder file ==
--Temperature, Humidity, Battery & Signal. This payload type only valid for ThingsSpeak Platform
++In TTN, use can add a custom payload so it shows friendly reading
--As below:
++In the page (% style="color:#037691" %)**Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder**(%%) to add the decoder from:
--**field1=27.9&field2=49.9&field3=3.23&field4=28**
++[[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/S31-LB%26S31B-LB>>https://github.com/dragino/dragino-end-node-decoder/tree/main/S31-LB%26S31B-LB]]
--1.
--11. Test Uplink and Change Update Interval
++== 2.5 Datalog Feature ==
--By default, Sensor will send uplinks **every 2 hours** & AT+NOUD=8
++Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, S31x-LB will store the reading for future retrieving purposes.
--User can use below commands to change the **uplink interval**.
--**~         AT+TDC=600      **~/~/ Set Update Interval to 600s
++=== 2.5.1 Ways to get datalog via LoRaWAN ===
--User can also push the button for more than 1 seconds to activate an uplink.
++Set [[PNACKMD=1>>||anchor="H2.5.4DatalogUplinkpayload28FPORT3D329"]], S31x-LB will wait for ACK for every uplink, when there is no LoRaWAN network,S31x-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
++* (((
++a) S31x-LB will do an ACK check for data records sending to make sure every data arrive server.
++)))
++* (((
++b) S31x-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but S31x-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if S31x-LB gets a ACK, S31x-LB will consider there is a network connection and resend all NONE-ACK messages.
++)))
++Below is the typical case for the auto-update datalog feature (Set PNACKMD=1)
++[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="图片-20220703111700-2.png" height="381" width="1119"]]
--1.
--11. Multi-Samplings and One uplink
--To save battery life, S31-NB will sample temperature & humidity data every 15 minutes and send one uplink every 2 hours. So each uplink it will include 8 stored data + 1 real-time data. They are defined by:
++=== 2.5.2 Unix TimeStamp ===
--* **AT+TR=900**     ~/~/  The unit is seconds, and the default is to record data once every 900 seconds (15 minutes, the minimum can be set to 180 seconds)
--* **AT+NOUD=8**  ~/~/   The device uploads 8 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
++S31x-LB uses Unix TimeStamp format based on
--The diagram below explains the relationship between TR, NOUD, and TDC more clearly:
++[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="图片-20220523001219-11.png" height="97" width="627"]]
--[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image001.png||alt="IMG_256"]]
++User can get this time from link:  [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/]] :
++Below is the converter example
--1.
--11. Humidity and Temperature alarm function
++[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-12.png?width=720&height=298&rev=1.1||alt="图片-20220523001219-12.png" height="298" width="720"]]
--On each sampling define by AT+TR ( default 900s or 15 minutes), when the value exceed the range, it will trigger an Alarm and immediately sends a uplink.
++So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25
--AT Commands:
--**AT+ SHHUM=min,max**
++=== 2.5.3 Set Device Time ===
--Example: AT+ SHHUM=50,80 ~/~/ Alarm when humidity lower than 50 or higher than 80.
++User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.
--**AT+ SHTEMP=min,max**
++Once S31x-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to S31x-LB. If S31x-LB fails to get the time from the server, S31x-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
--Example: AT+ SHTEMP=20,30 ~/~/ Alarm when temperature lower than 20 or higher than 30
++(% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.**
--Notice:
++=== 2.5.4 Datalog Uplink payload (FPORT~=3) ===
--* To disable Alarm, user can set min and max to same value , such as **AT+SHTEMP=0,0.**
--* If user only want to send only min or max, user can set the alarm to a value that device won’t reach. For example: **AT+SHTEMP=-80,0.**
++The Datalog uplinks will use below payload format.
--1.
--11. Trggier an uplink by external interrupt
++**Retrieval data payload:**
--S31-NB has an external trigger interrupt function. Users can use the PB15 pin to trigger the upload of data packets.
++(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)
++|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)(((
++**Size(bytes)**
++)))|=(% style="width: 40px; background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 55px; background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 65px; background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 180px; background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 100px; background-color:#D9E2F3;color:#0070C0" %)**4**
++|(% style="width:103px" %)Value|(% style="width:68px" %)(((
++ignore
++)))|(% style="width:104px" %)(((
++(((
++Humidity
++)))
--AT command:
++(((
++
++)))
++)))|(% style="width:87px" %)(((
++Temperature
++)))|(% style="width:178px" %)(((
++Poll message flag & Alarm Flag& Level of PA8
++)))|(% style="width:137px" %)Unix Time Stamp
--* AT+INTMOD   ~/~/ Set the trigger interrupt mode
--* AT+INTMOD=0    ~/~/Disable Interrupt
--* AT+INTMOD=1   ~/~/Trigger by rising and falling edge
--* AT+INTMOD=2   ~/~/Trigger by falling edge
--* AT+INTMOD=3    ~/~/Trigger by rising edge
++**Poll message flag & Alarm Flag & Level of PA8:**
++[[image:image-20230524114302-1.png||height="115" width="736"]]
++
++**No ACK Message**:  1: This message means this payload is fromn Uplink Message which doesn't get ACK from the server before ( for **PNACKMD=1** feature)
++
++**Poll Message Flag**: 1: This message is a poll message reply.
++
++* Poll Message Flag is set to 1.
++
++* Each data entry is 11 bytes, to save airtime and battery, devices will send max bytes according to the current DR and Frequency bands.
++
++For example, in US915 band, the max payload for different DR is:
++
++**a) DR0:** max is 11 bytes so one entry of data
++
++**b) DR1:** max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
++
++**c) DR2:** total payload includes 11 entries of data
++
++**d) DR3: **total payload includes 22 entries of data.
++
++If devise doesn't have any data in the polling time. Device will uplink 11 bytes of 0
++
++**Example:**
++
++If S31x-LB has below data inside Flash:
++
++[[image:image-20230524114654-2.png]]
++
++
++If user sends below downlink command:  31646D84E1646D856C05
++
++Where : Start time: 646D84E1 = time 23/5/24 03:30:41
++
++             Stop time: 646D856C= time 23/5/24 03:33:00
++
++
++**S31x-LB will uplink this payload.**
++
++[[image:image-20230524114826-3.png||height="448" width="1244"]]
++
++(((
++00 00 02 36 01 10 40 64 6D 84 E1 00 00 02 37 01 10 40 64 6D 84 F8 00 00 02 37 01 0F 40 64 6D 85 04 00 00 02 3A 01 0F 40 64 6D 85 18 00 00 02 3C 01 0F 40 64 6D 85 36 00 00 02 3D 01 0E 40 64 6D 85 3F 00 00 02 3F 01 0E 40 64 6D 85 60 00 00 02 40 01 0E 40 64 6D 85 6A
++)))
++
++(((
++Where the first 11 bytes is for the first entry:
++)))
++
++(((
++00 00 02 36 01 10 40 64 6D 84 E1
++)))
++
++(((
++**Hum**=0x0236/10=56.6
++)))
++
++(((
++**Temp**=0x0110/10=27.2
++)))
++
++(((
++**poll message flag & Alarm Flag & Level of PA8**=0x40,means reply data,sampling uplink message,the PA8 is low level.
++)))
++
++(((
++**Unix time** is 0x646D84E1=1684899041s=23/5/24 03:30:41
++)))
++
++
++(% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" data-widget="image" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="单击并拖动以调整大小" %)的(% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" data-widget="image" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="单击并拖动以调整大小" %)的
++
++== 2.6 Temperature Alarm Feature ==
++
++
++S31x-LB work flow with Alarm feature.
++
++
++[[image:image-20230524110125-3.png||height="768" width="1115"]]
++
++
++
++== 2.7 Frequency Plans ==
++
++
++The S31x-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
++
++[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/]]
++
++
++== 2.8 Firmware Change Log ==
++
++
++**Firmware download link: **[[https:~~/~~/www.dropbox.com/sh/fis3g6nmhv0eokg/AAC6BcCZaX4BdqZkduUvZ3jIa?dl=0>>https://www.dropbox.com/sh/fis3g6nmhv0eokg/AAC6BcCZaX4BdqZkduUvZ3jIa?dl=0]]
++
++
  = 3. Configure S31x-LB =
  == 3.1 Configure Methods ==
@@ -472,6 +472,7 @@
  * AT Command via UART Connection : See [[UART Connection>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H2.3UARTConnectionforSN50v3basemotherboard]].
  * LoRaWAN Downlink.  Instruction for different platforms: See [[IoT LoRaWAN Server>>http://wiki.dragino.com/xwiki/bin/view/Main/]] section.
++
  == 3.2 General Commands ==
@@ -519,6 +519,7 @@
  * Example 1: Downlink Payload: 0100001E       ~/~/  Set Transmit Interval (TDC) = 30 seconds
  * Example 2: Downlink Payload: 0100003C       ~/~/  Set Transmit Interval (TDC) = 60 seconds
++
  === 3.3.2 Get Device Status ===
@@ -602,6 +602,7 @@
  * Alarm & MOD bit is 0x7C, 0x7C >> 2 = 0x31: Means this message is the Alarm settings message.
++
  === 3.3.7 Set Interrupt Mode ===
@@ -635,6 +635,7 @@
  * Example 1: Downlink Payload: 06000000       ~/~/  Turn off interrupt mode
  * Example 2: Downlink Payload: 06000003      ~/~/   Set the interrupt mode to rising edge trigger
++
  === 3.3.8 Set Power Output Duration ===
@@ -663,6 +663,7 @@
  * Example 1: Downlink Payload: 070000     **~-~-->**   AT+5VT=0
  * Example 2: Downlink Payload: 0701F4      **~-~-->**  AT+5VT=500
++
  = 4. Battery & Power Consumption =
@@ -689,6 +689,7 @@
  * (Recommanded way) OTA firmware update via wireless : **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]**
  * Update through UART TTL interface : **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
++
  = 6. FAQ =
@@ -716,6 +716,7 @@
  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
++
  = 8. Packing Info =
@@ -733,6 +733,7 @@
  * Weight / pcs : g
++
  = 9. Support =
@@ -739,5 +739,3 @@
  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[Support@dragino.cc>>mailto:Support@dragino.cc]].
--
--(% style="display:none" %) (%%)

1692415924540-357.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-94.4 KB

Content

image-20230819113244-10.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-12.0 KB

Content

image-20230819113244-11.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-57.5 KB

Content

image-20230819113244-8.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-13.0 KB

Content

image-20230819113244-9.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-35.5 KB

Content