Changes for page wiki_test

Last modified by Mengting Qiu on 2024/09/05 17:35

From 77.1 to 78.1 From 82.31 to 82.32

From version 78.1

edited by Xiaoling
on 2023/08/19 11:32

Change comment: Uploaded new attachment "image-20230819113244-9.png", version {1}

To version 82.31

edited by Xiaoling
on 2023/08/19 15:07

Change comment: There is no comment for this version

Raw
Rendered

Summary

Page properties (1 modified, 0 added, 0 removed)
Attachments (0 modified, 4 added, 0 removed)

Details

Page properties

Content

@@ -3,7 +3,7 @@
--**Table of Contents：**
++**Table of Contents:**
  {{toc/}}
@@ -21,7 +21,7 @@
  The temperature & humidity sensor used in S31-NB is SHT31, which is fully calibrated, linearized, and temperature compensated digital output from Sensirion, it provides a strong reliability and long-term stability. The SHT31 is fixed in a (% style="color:blue" %)**waterproof anti-condensation casing**(%%) for long term use.
--S31-NB supports different uplink methods include (% style="color:blue" %)**TCP, MQTT, UDP** for different application requirement. and Support Uplinks to various IoT Servers.
++S31-NB supports different uplink methods include (% style="color:blue" %)**TCP, MQTT, UDP**(%%) for different application requirement. and Support Uplinks to various IoT Servers.
  S31-NB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), It is designed for long term use up to several years. (Real-world battery life depends on the use environment, update period and uplink method. Please check related Power Analyze report).
@@ -46,15 +46,16 @@
  * 8500mAh Battery for long term use
  * Nano SIM card slot for NB-IoT SIM
++
  == 1.3 Specification ==
--(% style="color:#037691" %)**Common DC Characteristics:**
++(% style="color:blue" %)**Common DC Characteristics:**
  * Supply Voltage: 2.1v ~~ 3.6v
  * Operating Temperature: -40 ~~ 85°C
--(% style="color:#037691" %)**Temperature Sensor:**
++(% style="color:blue" %)**Temperature Sensor:**
  * Range: -40 to + 80°C
  * Accuracy: ±0.2 @ 0-90 °C
@@ -61,7 +61,7 @@
  * Resolution: 0.1°C
  * Long Term Shift: <0.03 °C/yr
--(% style="color:#037691" %)**Humidity Sensor: **
++(% style="color:blue" %)**Humidity Sensor: **
  * Range: 0 ~~ 99.9% RH
  * Accuracy: ± 2%RH ( 0 ~~ 100%RH)
@@ -68,11 +68,11 @@
  * Resolution: 0.01% RH
  * Long Term Shift: <0.25 %RH/yr
--(% style="color:#037691" %)**NB-IoT Spec:**
++(% style="color:blue" %)**NB-IoT Spec:**
--**NB-IoT Module: BC660K-GL**
++(% style="color:#037691" %)**NB-IoT Module: BC660K-GL**
--Support Bands:
++(% style="color:#037691" %)**Support Bands:**
  * B1 @H-FDD: 2100MHz
  * B2 @H-FDD: 1900MHz
@@ -92,7 +92,7 @@
  * B70 @H-FDD: 2000MHz
  * B85 @H-FDD: 700MHz
--(% style="color:#037691" %)**Battery:**
++(% style="color:blue" %)**Battery:**
  * Li/SOCI2 un-chargeable battery
  * Capacity: 8500mAh
@@ -100,11 +100,13 @@
  * Max continuously current: 130mA
  * Max boost current: 2A, 1 second
--(% style="color:#037691" %)**Power Consumption**
++(% style="color:blue" %)**Power Consumption**
  * STOP Mode: 10uA @ 3.3v
  * Max transmit power: 350mA@3.3v
++
++
  == 1.4 Applications ==
@@ -125,7 +125,6 @@
  (% style="color:blue" %)**Working Mode:** (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
--
  == 1.6 Button & LEDs ==
@@ -133,7 +133,7 @@
  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
--|=(% style="width: 167px;background-color:#D9E2F3;color:#0070C0" %)**Behavior on ACT**|=(% style="width: 117px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 225px;background-color:#D9E2F3;color:#0070C0" %)**Action**
++|=(% style="width: 167px;background-color:#4F81BD;color:white" %)**Behavior on ACT**|=(% style="width: 117px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width:225px;background-color:#4F81BD;color:white" %)**Action**
  |(% style="width:167px" %)Pressing ACT between 1s < time < 3s|(% style="width:117px" %)Send an uplink|(% style="width:225px" %)(((
  If sensor has already attached to NB-IoT network, sensor will send an uplink packet, (% style="color:blue" %)**blue led** (%%)will blink once.
  Meanwhile, BLE module will be active and user can connect via BLE to configure device.
@@ -145,6 +145,8 @@
  )))
  |(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means device is in Deep Sleep Mode.
++
++
  == 1.7 BLE connection ==
@@ -168,7 +168,6 @@
  [[image:image-20230819104805-5.png]]
--
  === 1.8.1 Jumper JP2 ===
@@ -178,24 +178,24 @@
  === 1.8.2 BOOT MODE / SW1 ===
--1) (% style="color:blue" %)**ISP**(%%): upgrade mode, device won't have any signal in this mode. but ready for upgrade firmware. LED won't work. Firmware won't run.
++**1)** (% style="color:blue" %)**ISP**(%%): upgrade mode, device won't have any signal in this mode. but ready for upgrade firmware. LED won't work. Firmware won't run.
--2) (% style="color:blue" %)**Flash**(%%): work mode, device starts to work and send out console output for further debug
++**2)** (% style="color:blue" %)**Flash**(%%): work mode, device starts to work and send out console output for further debug
  === 1.8.3 Reset Button ===
++
  Press to reboot the device.
--
  == 1.9 Hardware Variant ==
  (% border="1" cellspacing="5" style="width:410px" %)
--|=(% style="width: 102px;background-color:#D9E2F3;color:#0070C0" %)Model|=(% style="width: 126px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)Photo|=(% style="width: 179px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)Probe Info
++|=(% style="width: 102px;background-color:#4F81BD;color:white" %)Model|=(% style="width: 126px; background-color:#4F81BD;color:white" %)Photo|=(% style="width: 179px;background-color:#4F81BD;color:white" %)Probe Info
  |(% style="width:102px" %)(((
--S31-LB
++S31-NB
  )))|(% style="width:126px" %)(((
  (% style="text-align:center" %)
  [[image:image-20230819110632-6.png||height="130" width="104"]]
@@ -207,7 +207,7 @@
  )))
  |(% style="width:102px" %)(((
--S31B-LB
++S31B-NB
  )))|(% style="width:126px" %)(((
  (% style="text-align:center" %)
  [[image:image-20230819110702-7.png||height="164" width="90"]]
@@ -221,673 +221,413 @@
--== 1.9 Mechanical ==
--
--
--[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143884058-338.png]]
--
--
--[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143899218-599.png]]
--
--
--[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143909447-639.png]]
--
--
  = 2. Use S31-NB to communicate with IoT Server =
  == 2.1 Send data to IoT server via NB-IoT network ==
--The S31x-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the S31x-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
++The S31-NB is equipped with a NB-IoT module, the pre-loaded firmware in S31-NB will get environment data from sensors and send the value to local NB-IoT network via the NB-IoT module.  The NB-IoT network will forward this value to IoT server via the protocol defined by S31-NB.
--== 2.2 Quick guide to connect to LoRaWAN server (OTAA) ==
++Below shows the network structure:
++[[image:1692415924540-357.png]]
--Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]]  as a LoRaWAN gateway in this example.
--The LPS8V2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
++There are two version: (% style="color:blue" %)**-GE**(%%) and (% style="color:blue" %)**-1D**(%%) version of S31-NB.
--(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from S31x-LB.
++(% style="color:blue" %)**GE Version**(%%): This version doesn't include SIM card or point to any IoT server. User needs to use AT Commands to configure below two steps to set S31-NB send data to IoT server.
--Each S31x-LB is shipped with a sticker with the default device EUI as below:
++* Install NB-IoT SIM card and configure APN. See instruction of [[Attach Network>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H2.AttachNetwork]].
--[[image:image-20230426084152-1.png||alt="图片-20230426084152-1.png" height="233" width="502"]]
++* Set up sensor to point to IoT Server. See instruction of [[Configure to Connect Different Servers>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.Configuretoconnecttodifferentservers]].
++Below shows result of different server as a glance.
--You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:
++(% border="1" cellspacing="4" style="width:515px" %)
++|(% style="background-color:#4f81bd; color:white; width:100px" %)**Servers**|(% style="background-color:#4f81bd; color:white; width:300px" %)**Dash Board**|(% style="background-color:#4f81bd; color:white; width:115px" %)**Comments**
++|(% style="width:127px" %)[[Node-Red>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.5A0Node-RedA028viaA0MQTT29]]|(% style="width:385px" %)(((
++(% style="text-align:center" %)
++[[image:image-20230819113244-8.png||height="183" width="367"]]
++)))|(% style="width:170px" %)
++|(% style="width:127px" %)[[DataCake>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.4Datacake]]|(% style="width:385px" %)(((
++(% style="text-align:center" %)
++[[image:image-20230819113244-9.png||height="119" width="367"]]
++)))|(% style="width:170px" %)
++|(% style="width:127px" %)[[Tago.IO>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.7A0Tago.ioA028viaA0MQTT29]]|(% style="width:385px" %) |(% style="width:170px" %)
++|(% style="width:127px" %)[[General UDP>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.1GeneralA0UDPA0Connection]]|(% style="width:385px" %)Raw Payload. Need Developer to design Dash Board|(% style="width:170px" %)
++|(% style="width:127px" %)[[General MQTT>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.2GeneralA0MQTTA0Connection]]|(% style="width:385px" %)Raw Payload. Need Developer to design Dash Board|(% style="width:170px" %)
++|(% style="width:127px" %)[[ThingSpeak>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.3A0ThingSpeakA028viaA0MQTT29]]|(% style="width:385px" %)(((
++(% style="text-align:center" %)
++[[image:image-20230819113244-10.png||height="104" width="367"]]
++)))|(% style="width:170px" %)
++|(% style="width:127px" %)[[ThingsBoard>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.6A0ThingsBoard.CloudA028viaA0MQTT29]]|(% style="width:385px" %)(((
++(% style="text-align:center" %)
++[[image:image-20230819113244-11.png||height="141" width="367"]]
++)))|(% style="width:170px" %)
++(% style="color:blue" %)**1D Version**(%%): This version has 1NCE SIM card pre-installed and configure to send value to DataCake. User Just need to select the sensor type in DataCake and Activate S31-NB and user will be able to see data in DataCake. See here for [[DataCake Config Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.4Datacake]].
--(% style="color:blue" %)**Register the device**
--[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/1654935135620-998.png?rev=1.1||alt="1654935135620-998.png"]]
++== 2.2 Payload Types ==
--(% style="color:blue" %)**Add APP EUI and DEV EUI**
++To meet different server requirement, S31-NB supports different payload type.
--[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-4.png?width=753&height=551&rev=1.1||alt="图片-20220611161308-4.png"]]
++**Includes:**
++* [[General JSON format payload>>||anchor="H2.2.1GeneralJsonFormat28Type3D529"]]. (Type=5)
--(% style="color:blue" %)**Add APP EUI in the application**
++* [[HEX format Payload>>||anchor="H2.2.2HEXformatPayload28Type3D029"]]. (Type=0)
++* [[ThingSpeak Format>>||anchor="H2.2.4ThingSpeakPayload28Type3D129"]]. (Type=1)
--[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-5.png?width=742&height=601&rev=1.1||alt="图片-20220611161308-5.png"]]
++* [[ThingsBoard Format>>||anchor="H2.2.3ThingsBoardPayload28Type3D329"]]. (Type=3)
++User can specify the payload type when choose the connection protocol. Example:
--(% style="color:blue" %)**Add APP KEY**
++(% style="color:#037691" %)**AT+PRO=2,0**  (%%)          ~/~/ Use UDP Connection & hex Payload
--[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-6.png?width=744&height=485&rev=1.1||alt="图片-20220611161308-6.png"]]
++(% style="color:#037691" %)**AT+PRO=2,5**   (%%)         ~/~/ Use UDP Connection & Json Payload
++(% style="color:#037691" %)**AT+PRO=3,5 **  (%%)         ~/~/ Use MQTT Connection & Json Payload
--(% style="color:blue" %)**Step 2:**(%%) Activate on S31x-LB
++=== 2.2.1 General Json Format(Type~=5) ===
--Press the button for 5 seconds to activate the S31x-LB.
--(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:blue" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network. (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
++This is the General Json Format. As below:
--After join success, it will start to upload messages to TTN and you can see the messages in the panel.
++(% style="color:#4472c4" %)**{"IMEI":866207053462762,"temperature":29.2,"humidity":54.2,"battery":3.27,"signal":24,"Model":S31x-NB, "1":{28.2,48.3,2023/08/10 08:00:37},"2":{28.1,49.1,2023/08/10 07:57:37},"3":{28.1,48.5,2023/08/10 07:54:37},"4":{28.2,48.6,2023/08/10 07:51:37},"5":{28.1,48.9,2023/08/10 07:48:37},"6":{28.2,48.8,2023/08/10 07:45:37},"7":{28.2,48.8,2023/08/10 07:42:37},"8":{28.0,48.8,2023/08/10 07:39:37}}**
--== 2.3 Uplink Payload ==
++(% style="color:red" %)**Notice, from above payload:**
--=== 2.3.1 Device Status, FPORT~=5 ===
++* Temperature , Humidity , Battery & Signal are the value at uplink time.
++* Json entry 1 ~~ 8 are the last 1 ~~ 8 sampling data as specify by (% style="color:#037691" %)**AT+NOUD=8 ** (%%)Command. Each entry includes (from left to right): Temperature, Humidity, Sampling time.
--Users can use the downlink command(**0x26 01**) to ask S31x-LB to send device configure detail, include device configure status. S31x-LB will uplink a payload via FPort=5 to server.
--The Payload format is as below.
++=== 2.2.2 HEX format Payload(Type~=0) ===
--(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
--|(% colspan="6" style="background-color:#d9e2f3; color:#0070c0" %)**Device Status (FPORT=5)**
--|(% style="width:103px" %)**Size (bytes)**|(% style="width:72px" %)**1**|**2**|(% style="width:91px" %)**1**|(% style="width:86px" %)**1**|(% style="width:44px" %)**2**
--|(% style="width:103px" %)**Value**|(% style="width:72px" %)Sensor Model|Firmware Version|(% style="width:91px" %)Frequency Band|(% style="width:86px" %)Sub-band|(% style="width:44px" %)BAT
--Example parse in TTNv3
++This is the HEX Format. As below:
--[[image:image-20230524144422-1.png||height="174" width="1080"]]
++(% style="color:#4472c4" %)**f86620705346276200640cba16010000000011011801e864d49c2d011a01e364d49925011901eb64d49871011901e564d497bd011a01e664d49709011901e964d49655011a01e864d495a1011a01e864d494ed011801e864d49439**
++[[image:1692424009971-458.png]]
--(% style="color:#037691" %)**Sensor Model**(%%): For S31x-LB, this value is 0x0A
--(% style="color:#037691" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
++(% style="color:blue" %)**Version:**
--(% style="color:#037691" %)**Frequency Band**:
++These bytes include the hardware and software version.
--0x01: EU868
++(% style="color:#037691" %)**Higher byte:**(%%) Specify Sensor Model: 0x00 for S31B-NB & S31-NB
--0x02: US915
++(% style="color:#037691" %)**Lower byte:**(%%) Specify the software version: 0x64=100, means firmware version 100
--0x03: IN865
--0x04: AU915
++(% style="color:blue" %)**BAT (Battery Info):**
--0x05: KZ865
++Ex1: 0x0CBA = 3258mV
--0x06: RU864
--0x07: AS923
++(% style="color:blue" %)**Signal Strength:**
--0x08: AS923-1
++NB-IoT Network signal Strength.
--0x09: AS923-2
++**Ex1: 0x16 = 22**
--0x0a: AS923-3
++**0**        -113dBm or less
--0x0b: CN470
++**1**        -111dBm
--0x0c: EU433
++**2...30** -109dBm... -53dBm
--0x0d: KR920
++**31**      -51dBm or greater
--0x0e: MA869
++**99**      Not known or not detectable
--(% style="color:#037691" %)**Sub-Band**:
++(% style="color:blue" %)**Temperature: **
--AU915 and US915:value 0x00 ~~ 0x08
--
--CN470: value 0x0B ~~ 0x0C
--
--Other Bands: Always 0x00
--
--
--(% style="color:#037691" %)**Battery Info**:
--
--Check the battery voltage.
--
--Ex1: 0x0B45 = 2885mV
--
--Ex2: 0x0B49 = 2889mV
--
--
--=== 2.3.2  Sensor Data. FPORT~=2 ===
--
--
--Sensor Data is uplink via FPORT=2
--
--(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)
--|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)(((
--**Size(bytes)**
--)))|=(% style="width: 40px;background-color:#D9E2F3;color:#0070C0" %)2|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)4|=(% style="width: 150px; background-color: #D9E2F3;color:#0070C0" %)1|=(% style="width: 80px; background-color: #D9E2F3;color:#0070C0" %)**2**|=(% style="width: 80px; background-color: #D9E2F3;color:#0070C0" %)2
--|(% style="width:99px" %)Value|(% style="width:69px" %)(((
--Battery
--)))|(% style="width:130px" %)(((
--Unix TimeStamp
--)))|(% style="width:194px" %)(((
--Alarm Flag & MOD& Level of PA8
--)))|(% style="width:106px" %)(((
--Temperature
--)))|(% style="width:97px" %)(((
--Humidity
--)))
--
--[[image:image-20230524144456-2.png||height="180" width="1142"]]
--
--
--==== (% style="color:#4472c4" %)**Battery**(%%) ====
--
--Sensor Battery Level.
--
--Ex1: 0x0B45 = 2885mV
--
--Ex2: 0x0B49 = 2889mV
--
--
--==== (% style="color:#4472c4" %)**Temperature**(%%) ====
--
--**Example**:
--
  If payload is: 0105H:  (0105 & 8000 == 0), temp = 0105H /10 = 26.1 degree
  If payload is: FF3FH :  (FF3F & 8000 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
--（FF3F & 8000：Judge whether the highest bit is 1, when the highest bit is 1, it is negative）
++(FF3F & 8000: Judge whether the highest bit is 1, when the highest bit is 1, it is negative)
--==== (% style="color:#4472c4" %)**Humidity**(%%) ====
++(% style="color:blue" %)**Humidity:   **
++Read:0295(H)=661(D)    Value:  661 / 10=66.1, So 66.1%
--Read:0x(0197)=412    Value:  412 / 10=41.2, So 41.2%
++(% style="color:blue" %)**TimeStamp:   **
--==== (% style="color:#4472c4" %)**Alarm Flag & MOD & Level of PA8**(%%) ====
++Unit TimeStamp Example: 64d49439(H) = 1691653177(D)
++Put the decimal value into this link(https:~/~/www.epochconverter.com/) to get the time.
--**Example:**
--If payload & 0x01 = 0x01  **~-~->** This is an Alarm Message.It means that the temperature and humidity exceed the alarm value or trigger an interrupt.
++=== 2.2.3 ThingsBoard Payload(Type~=3) ===
--If payload & 0x01 = 0x00  **~-~->** This is a normal uplink message, no alarm.
--If payload & 0x80>>7 = 0x01  **~-~->** The PA8 is low level.
++Type3 payload special design for ThingsBoard, it will also configure other default server to ThingsBoard.
--If payload & 0x80>>7 =0x00  **~-~->** The PA8 is high level.
++(% style="color:#4472c4" %)**{"IMEI":866207053462762,"temperature":29.2,"humidity":54.2,"battery":3.27,"signal":24}**
--If payload >> 2 = 0x00     **~-~->**  means MOD=1, This is a sampling uplink message.
--If payload >> 2 = 0x31     **~-~->**  means MOD=31, this message is a reply message for polling, this message contains the alarm settings. see [[this link>>path:#HPolltheAlarmsettings:]] for detail.
++=== 2.2.4 ThingSpeak Payload(Type~=1) ===
--== 2.4 Payload Decoder file ==
++This payload meets ThingSpeak platform requirement. It includes only four fields. Form 1~~4 are:
++Temperature, Humidity, Battery & Signal. This payload type only valid for ThingsSpeak Platform
--In TTN, use can add a custom payload so it shows friendly reading
++As below:
--In the page (% style="color:#037691" %)**Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder**(%%) to add the decoder from:
++(% style="color:#4472c4" %)**field1=27.9&field2=49.9&field3=3.23&field4=28**
--[[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/S31-LB%26S31B-LB>>https://github.com/dragino/dragino-end-node-decoder/tree/main/S31-LB%26S31B-LB]]
++== 2.3 Test Uplink and Change Update Interval ==
--== 2.5 Datalog Feature ==
++By default, Sensor will send uplinks (% style="color:blue" %)**every 2 hours**(%%) & AT+NOUD=8
--Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, S31x-LB will store the reading for future retrieving purposes.
++User can use below commands to change the (% style="color:blue" %)**uplink interval**.
++(% style="color:#037691" %)**AT+TDC=600 ** (%%)      ~/~/ Set Update Interval to 600s
--=== 2.5.1 Ways to get datalog via LoRaWAN ===
++User can also push the button for more than 1 seconds to activate an uplink.
--Set [[PNACKMD=1>>||anchor="H2.5.4DatalogUplinkpayload28FPORT3D329"]], S31x-LB will wait for ACK for every uplink, when there is no LoRaWAN network,S31x-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
++== 2.4 Multi-Samplings and One uplink ==
--* (((
--a) S31x-LB will do an ACK check for data records sending to make sure every data arrive server.
--)))
--* (((
--b) S31x-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but S31x-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if S31x-LB gets a ACK, S31x-LB will consider there is a network connection and resend all NONE-ACK messages.
--)))
--Below is the typical case for the auto-update datalog feature (Set PNACKMD=1)
++To save battery life, S31-NB will sample temperature & humidity data every 15 minutes and send one uplink every 2 hours. So each uplink it will include 8 stored data + 1 real-time data. They are defined by:
--[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="图片-20220703111700-2.png" height="381" width="1119"]]
++* (% style="color:#037691" %)**AT+TR=900**   (%%)     ~/~/ The unit is seconds, and the default is to record data once every 900 seconds (15 minutes, the minimum can be set to 180 seconds)
++* (% style="color:#037691" %)**AT+NOUD=8**     (%%)~/~/  The device uploads 8 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
--=== 2.5.2 Unix TimeStamp ===
++The diagram below explains the relationship between TR, NOUD, and TDC more clearly:
++[[image:1692424376354-959.png]]
--S31x-LB uses Unix TimeStamp format based on
--[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="图片-20220523001219-11.png" height="97" width="627"]]
++== 2.5 Humidity and Temperature alarm function ==
--User can get this time from link:  [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/]] :
--Below is the converter example
++On each sampling define by AT+TR ( default 900s or 15 minutes), when the value exceed the range, it will trigger an Alarm and immediately sends a uplink.
--[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-12.png?width=720&height=298&rev=1.1||alt="图片-20220523001219-12.png" height="298" width="720"]]
++(% style="color:blue" %)**AT Commands:**
--So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25
++(% style="color:#037691" %)**AT+ SHHUM=min,max**
++Example: AT+ SHHUM=50,80     ~/~/ Alarm when humidity lower than 50 or higher than 80.
--=== 2.5.3 Set Device Time ===
++(% style="color:#037691" %)**AT+ SHTEMP=min,max**
--User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.
++Example: AT+ SHTEMP=20,30   ~/~/ Alarm when temperature lower than 20 or higher than 30
--Once S31x-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to S31x-LB. If S31x-LB fails to get the time from the server, S31x-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
--(% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.**
++(% style="color:red" %)**Notice:**
++* To disable Alarm, user can set min and max to same value , such as (% style="color:#037691" %)**AT+SHTEMP=0,0.**
--=== 2.5.4 Datalog Uplink payload (FPORT~=3) ===
++* If user only want to send only min or max, user can set the alarm to a value that device won’t reach. For example: (% style="color:#037691" %)**AT+SHTEMP=-80,0.**
--The Datalog uplinks will use below payload format.
--**Retrieval data payload:**
++== 2.6 Trggier an uplink by external interrupt ==
--(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)
--|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)(((
--**Size(bytes)**
--)))|=(% style="width: 40px; background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 55px; background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 65px; background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 180px; background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 100px; background-color:#D9E2F3;color:#0070C0" %)**4**
--|(% style="width:103px" %)Value|(% style="width:68px" %)(((
--ignore
--)))|(% style="width:104px" %)(((
--(((
--Humidity
--)))
--(((
--
--)))
--)))|(% style="width:87px" %)(((
--Temperature
--)))|(% style="width:178px" %)(((
--Poll message flag & Alarm Flag& Level of PA8
--)))|(% style="width:137px" %)Unix Time Stamp
++S31-NB has an external trigger interrupt function. Users can use the PB15 pin to trigger the upload of data packets.
--**Poll message flag & Alarm Flag & Level of PA8:**
++(% style="color:blue" %)**AT command:**
--[[image:image-20230524114302-1.png||height="115" width="736"]]
++* (% style="color:#037691" %)**AT+INTMOD **(%%)        ~/~/ Set the trigger interrupt mode
++* (% style="color:#037691" %)**AT+INTMOD=0 **(%%)   ~/~/ Disable Interrupt
--**No ACK Message**:  1: This message means this payload is fromn Uplink Message which doesn't get ACK from the server before ( for **PNACKMD=1** feature)
++* (% style="color:#037691" %)**AT+INTMOD=1 **(%%)   ~/~/ Trigger by rising and falling edge
--**Poll Message Flag**: 1: This message is a poll message reply.
++* (% style="color:#037691" %)**AT+INTMOD=2 **(%%)   ~/~/ Trigger by falling edge
--* Poll Message Flag is set to 1.
++* (% style="color:#037691" %)**AT+INTMOD=3  **(%%)  ~/~/ Trigger by rising edge
--* Each data entry is 11 bytes, to save airtime and battery, devices will send max bytes according to the current DR and Frequency bands.
--For example, in US915 band, the max payload for different DR is:
--**a) DR0:** max is 11 bytes so one entry of data
++= 3. Configure S31x-NB =
--**b) DR1:** max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
--
--**c) DR2:** total payload includes 11 entries of data
--
--**d) DR3: **total payload includes 22 entries of data.
--
--If devise doesn't have any data in the polling time. Device will uplink 11 bytes of 0
--
--**Example:**
--
--If S31x-LB has below data inside Flash:
--
--[[image:image-20230524114654-2.png]]
--
--
--If user sends below downlink command:  31646D84E1646D856C05
--
--Where : Start time: 646D84E1 = time 23/5/24 03:30:41
--
--             Stop time: 646D856C= time 23/5/24 03:33:00
--
--
--**S31x-LB will uplink this payload.**
--
--[[image:image-20230524114826-3.png||height="448" width="1244"]]
--
--(((
--00 00 02 36 01 10 40 64 6D 84 E1 00 00 02 37 01 10 40 64 6D 84 F8 00 00 02 37 01 0F 40 64 6D 85 04 00 00 02 3A 01 0F 40 64 6D 85 18 00 00 02 3C 01 0F 40 64 6D 85 36 00 00 02 3D 01 0E 40 64 6D 85 3F 00 00 02 3F 01 0E 40 64 6D 85 60 00 00 02 40 01 0E 40 64 6D 85 6A
--)))
--
--(((
--Where the first 11 bytes is for the first entry:
--)))
--
--(((
--00 00 02 36 01 10 40 64 6D 84 E1
--)))
--
--(((
--**Hum**=0x0236/10=56.6
--)))
--
--(((
--**Temp**=0x0110/10=27.2
--)))
--
--(((
--**poll message flag & Alarm Flag & Level of PA8**=0x40,means reply data,sampling uplink message,the PA8 is low level.
--)))
--
--(((
--**Unix time** is 0x646D84E1=1684899041s=23/5/24 03:30:41
--)))
--
--
--(% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" data-widget="image" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="单击并拖动以调整大小" %)的(% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" data-widget="image" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="单击并拖动以调整大小" %)的
--
--== 2.6 Temperature Alarm Feature ==
--
--
--S31x-LB work flow with Alarm feature.
--
--
--[[image:image-20230524110125-3.png||height="768" width="1115"]]
--
--
--
--== 2.7 Frequency Plans ==
--
--
--The S31x-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
--
--[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/]]
--
--
--== 2.8 Firmware Change Log ==
--
--
--**Firmware download link: **[[https:~~/~~/www.dropbox.com/sh/fis3g6nmhv0eokg/AAC6BcCZaX4BdqZkduUvZ3jIa?dl=0>>https://www.dropbox.com/sh/fis3g6nmhv0eokg/AAC6BcCZaX4BdqZkduUvZ3jIa?dl=0]]
--
--
--= 3. Configure S31x-LB =
--
  == 3.1 Configure Methods ==
--S31x-LB supports below configure method:
++S31x-NB supports below configure method:
  * AT Command via Bluetooth Connection (**Recommended**): [[BLE Configure Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
++
  * AT Command via UART Connection : See [[UART Connection>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H2.3UARTConnectionforSN50v3basemotherboard]].
--* LoRaWAN Downlink.  Instruction for different platforms: See [[IoT LoRaWAN Server>>http://wiki.dragino.com/xwiki/bin/view/Main/]] section.
--== 3.2 General Commands ==
--These commands are to configure:
++== 3.2 AT Commands Set ==
--* General system settings like: uplink interval.
--* LoRaWAN protocol & radio related command.
--They are same for all Dragino Devices which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:
++AT+<CMD>?           : Help on <CMD>
--[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
++AT+<CMD>                      : Run <CMD>
++AT+<CMD>=<value>      : Set the value
--== 3.3 Commands special design for S31x-LB ==
++AT+<CMD>=?          : Get the value
--These commands only valid for S31x-LB, as below:
++(% style="color:blue" %)**General Commands**
++AT                    : Attention
--=== 3.3.1 Set Transmit Interval Time ===
++AT?                  : Short Help
++ATZ                 : MCU Reset
--Feature: Change LoRaWAN End Node Transmit Interval.
++AT+TDC          : Application Data Transmission Interval
--(% style="color:blue" %)**AT Command: AT+TDC**
++AT+CFG          : Print all configurations
--(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
--|=(% style="width: 156px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 137px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="background-color:#D9E2F3;color:#0070C0" %)**Response**
--|(% style="width:156px" %)AT+TDC=?|(% style="width:137px" %)Show current transmit Interval|(((
--30000
--OK
--the interval is 30000ms = 30s
--)))
--|(% style="width:156px" %)AT+TDC=60000|(% style="width:137px" %)Set Transmit Interval|(((
--OK
--Set transmit interval to 60000ms = 60 seconds
--)))
++AT+CFGMOD           : Working mode selection
--(% style="color:blue" %)**Downlink Command: 0x01**
++AT+DEUI                  : Get or set the Device ID
--Format: Command Code (0x01) followed by 3 bytes time value.
++AT+INTMOD            : Set the trigger interrupt mode
--If the downlink payload=0100003C, it means set the END Node's Transmit Interval to 0x00003C=60(S), while type code is 01.
++AT+5VT           : Set extend the time of 5V power
--* Example 1: Downlink Payload: 0100001E       ~/~/  Set Transmit Interval (TDC) = 30 seconds
--* Example 2: Downlink Payload: 0100003C       ~/~/  Set Transmit Interval (TDC) = 60 seconds
++AT+PRO          : Choose agreement
--=== 3.3.2 Get Device Status ===
++AT+RXDL        : Extend the sending and receiving time
++AT+DNSCFG   : Get or Set DNS Server
--Send a LoRaWAN downlink to ask device send Alarm settings.
++AT+GETSENSORVALUE   : Returns the current sensor measurement
--(% style="color:blue" %)**Downlink Payload:  **(%%)0x26 01
++AT+NOUD  : Get or Set the number of data to be uploaded
--Sensor will upload Device Status via FPORT=5. See payload section for detail.
++AT+CDP     : Read or Clear cached data
++AT+SHTEMP:   Get or Set alarm of temp
--=== 3.3.3 Set Temperature Alarm Threshold ===
++AT+SHHUM:   Get or Set alarm of moisture
++AT+SERVADDR :   Server Address
--* (% style="color:blue" %)**AT Command:**
--(% style="color:#037691" %)**AT+SHTEMP=min,max**
++(% style="color:blue" %)**UDP Management**
--* When min=0, and max≠0, Alarm higher than max
--* When min≠0, and max=0, Alarm lower than min
--* When min≠0 and max≠0, Alarm higher than max or lower than min
++AT+CFM  :    Upload confirmation mode (only valid for UDP)
--Example:
--   AT+SHTEMP=0,30   ~/~/ Alarm when temperature higher than 30.
++(% style="color:blue" %)**MQTT Management**
--* (% style="color:blue" %)**Downlink Payload:**
++AT+CLIENT               : Get or Set MQTT client
--(% style="color:#037691" %)**0x(0C 01 00 1E)**  (%%)     ~/~/ Set AT+SHTEMP=0,30
++AT+UNAME              : Get or Set MQTT Username
--(% style="color:red" %)**(note: 3^^rd^^ byte= 0x00 for low limit(not set), 4^^th^^ byte = 0x1E for high limit: 30)**
++AT+PWD                  : Get or Set MQTT password
++AT+PUBTOPIC          : Get or Set MQTT publish topic
--=== 3.3.4 Set Humidity Alarm Threshold ===
++AT+SUBTOPIC          : Get or Set MQTT subscription topic
--* (% style="color:blue" %)**AT Command:**
++(% style="color:blue" %)**Information**
--(% style="color:#037691" %)**AT+SHHUM=min,max**
++AT+FDR              : Factory Data Reset
--* When min=0, and max≠0, Alarm higher than max
--* When min≠0, and max=0, Alarm lower than min
--* When min≠0 and max≠0, Alarm higher than max or lower than min
++AT+PWORD        : Serial Access Password
--Example:
++AT+LDATA           : Get the last upload data
--   AT+SHHUM=70,0      ~/~/ Alarm when humidity lower than 70%.
++AT+CDP               : Read or Clear cached data
--* (% style="color:blue" %)**Downlink Payload:**
--(% style="color:#037691" %)**0x(0C 02 46 00)**(%%)         ~/~/ Set AT+SHTHUM=70,0
--
--(% style="color:red" %)**(note: 3^^rd^^ byte= 0x46 for low limit (70%), 4^^th^^ byte = 0x00 for high limit (not set))**
--
--
--=== 3.3.5 Set Alarm Interval ===
--
--
--The shortest time of two Alarm packet. (unit: min)
--
--* (% style="color:blue" %)**AT Command:**
--
--(% style="color:#037691" %)**AT+ATDC=30** (%%)      ~/~/ The shortest interval of two Alarm packets is 30 minutes, Means is there is an alarm packet uplink, there won't be another one in the next 30 minutes.
--
--* (% style="color:blue" %)**Downlink Payload:**
--
--(% style="color:#037691" %)**0x(0D 00 1E)**(%%)     **~-~--> ** Set AT+ATDC=0x 00 1E = 30 minutes
--
--
--=== 3.3.6 Get Alarm settings ===
--
--
--Send a LoRaWAN downlink to ask device send Alarm settings.
--
--* (% style="color:#037691" %)**Downlink Payload:  **(%%)0x0E 01
--
--**Example:**
--
--[[image:image-20230524110211-4.png]]
--
--**Explain:**
--
--* Alarm & MOD bit is 0x7C, 0x7C >> 2 = 0x31: Means this message is the Alarm settings message.
--
--=== 3.3.7 Set Interrupt Mode ===
--
--
--Feature, Set Interrupt mode for PA8 of pin.
--
--When AT+INTMOD=0 is set, PA8 is used as a digital input port.
--
--(% style="color:blue" %)**AT Command: AT+INTMOD**
--
--(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
--|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 197px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Response**
--|(% style="width:154px" %)AT+INTMOD=?|(% style="width:196px" %)Show current interrupt mode|(% style="width:157px" %)(((
--0
--OK
--the mode is 0 =Disable Interrupt
--)))
--|(% style="width:154px" %)AT+INTMOD=2|(% style="width:196px" %)(((
--Set Transmit Interval
--0. (Disable Interrupt),
--~1. (Trigger by rising and falling edge)
--2. (Trigger by falling edge)
--3. (Trigger by rising edge)
--)))|(% style="width:157px" %)OK
--
--(% style="color:blue" %)**Downlink Command: 0x06**
--
--Format: Command Code (0x06) followed by 3 bytes.
--
--This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
--
--* Example 1: Downlink Payload: 06000000       ~/~/  Turn off interrupt mode
--* Example 2: Downlink Payload: 06000003      ~/~/   Set the interrupt mode to rising edge trigger
--
--=== 3.3.8 Set Power Output Duration ===
--
--
--Control the output duration 5V . Before each sampling, device will
--
--~1. first enable the power output to external sensor,
--
--2. keep it on as per duration, read sensor value and construct uplink payload
--
--3. final, close the power output.
--
--(% style="color:blue" %)**AT Command: AT+5VT**
--
--(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
--|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 197px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Response**
--|(% style="width:154px" %)AT+5VT=?|(% style="width:196px" %)Show 5V open time.|(% style="width:157px" %)0 (default)
--OK
--|(% style="width:154px" %)AT+5VT=1000|(% style="width:196px" %)Close after a delay of 1000 milliseconds.|(% style="width:157px" %)OK
--
--(% style="color:blue" %)**Downlink Command: 0x07**
--
--Format: Command Code (0x07) followed by 2 bytes.
--
--The first and second bytes are the time to turn on.
--
--* Example 1: Downlink Payload: 070000     **~-~-->**   AT+5VT=0
--* Example 2: Downlink Payload: 0701F4      **~-~-->**  AT+5VT=500
--
  = 4. Battery & Power Consumption =
--S31x-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
++S31x-NB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
  [[**Battery Info & Power Consumption Analyze**>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
--= 5. OTA Firmware update =
++= 5. Firmware update =
--(% class="wikigeneratedid" %)
--User can change firmware S31x-LB to:
++User can change device firmware to::
--* Change Frequency band/ region.
  * Update with new features.
++
  * Fix bugs.
--Firmware and changelog can be downloaded from : **[[Firmware download link>>https://www.dropbox.com/sh/fis3g6nmhv0eokg/AAC6BcCZaX4BdqZkduUvZ3jIa?dl=0]]**
++Firmware and changelog can be downloaded from : **[[Firmware download link>>https://www.dropbox.com/sh/fhb3uyl4gt6clru/AAAiZVTFcxrfE1JOOyfcgO9ha?dl=0]]**
--
  Methods to Update Firmware:
--* (Recommanded way) OTA firmware update via wireless : **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]**
++* (Recommended way) OTA firmware update via BLE: [[**Instruction**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/BLE_Firmware_Update_NB_Sensors_BC660K-GL/]].
++
  * Update through UART TTL interface : **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
--= 6. FAQ =
++= 6. FAQ =
--= 7. Order Info =
++== 6.1 How can I access t BC660K-GL AT Commands? ==
--Part Number: (% style="color:blue" %)**S31-LB-XX  / S31B-LB-XX**
++User can access to BC660K-GL directly and send AT Commands.
--(% style="color:red" %)**XX**(%%): The default frequency band
++[[See BC660K-GL AT Command set>>url:https://www.dropbox.com/sh/5f6ssda5fum8rvs/AABT68l8ZzWOvZ5eg2qwOoFda?dl=0]]
--* (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
--* (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
++= 7. Order Info =
--* (% style="color:red" %)**EU433**(%%): LoRaWAN EU433 band
--* (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
++Part Number: (% style="color:blue" %)**S31-NB-XX  / S31B-NB-XX**
--* (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
++(% style="color:red" %)**XX**(%%):
--* (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
++* (% style="color:#037691" %)**GE**(%%): General version ( Exclude SIM card)
--* (% style="color:red" %)**IN865**(%%): LoRaWAN IN865 band
++* (% style="color:#037691" %)**1D**(%%): with 1NCE* 10 years 500MB SIM card and Pre-configure to DataCake server
--* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
++(% style="color:#037691" %)**1NCE SIM Card NB-IoT network coverage**(%%): Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Finland, Germany, Great Britain, Greece, Hungary, Ireland, Italy, Latvia, Malta, Netherlands, Norway, Puerto Rico, Russia, Slovak , Republic, Slovenia, Spain, Sweden, Switzerland, Taiwan, USA, US Virgin Islands
++
  = 8. Packing Info =
  (% style="color:#037691" %)**Package Includes**:
--* S31x-LB LoRaWAN Temperature & Humidity Sensor
++* S31-NB or S31-NB NB-IoT Sensor Node x 1
++* External antenna x 1
++
  (% style="color:#037691" %)**Dimension and weight**:
--* Device Size: cm
++* Device Size: 13.0 x 5 x 4.5 cm
--* Device Weight: g
++* Device Weight: 150g
--* Package Size / pcs : cm
++* Package Size / pcs : 14.0 x 8x 5 cm
--* Weight / pcs : g
++* Weight / pcs : 180g
++
++
  = 9. Support =
@@ -895,4 +895,4 @@
  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[Support@dragino.cc>>mailto:Support@dragino.cc]].
--(% style="display:none" %) (%%)
++(% style="display:none" %)  (%%)

1692424009971-458.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+147.4 KB

Content

1692424376354-959.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+146.1 KB

Content

image-20230819113244-10.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+12.0 KB

Content

image-20230819113244-11.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+57.5 KB

Content