Skip to Content

Changes for page wiki_test

Last modified by Mengting Qiu on 2024/09/05 17:35
From version 74.1
edited by Xiaoling
on 2023/08/19 11:06
Change comment: Uploaded new attachment "image-20230819110632-6.png", version {1}
To version 82.13
edited by Xiaoling
on 2023/08/19 14:12
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -21,7 +21,7 @@
21 21  
22 22  The temperature & humidity sensor used in S31-NB is SHT31, which is fully calibrated, linearized, and temperature compensated digital output from Sensirion, it provides a strong reliability and long-term stability. The SHT31 is fixed in a (% style="color:blue" %)**waterproof anti-condensation casing**(%%) for long term use.
23 23  
24 -S31-NB supports different uplink methods include (% style="color:blue" %)**TCP, MQTT, UDP** for different application requirement. and Support Uplinks to various IoT Servers.
24 +S31-NB supports different uplink methods include (% style="color:blue" %)**TCP, MQTT, UDP** for different application requirement. and Support Uplinks to various IoT Servers.
25 25  
26 26  S31-NB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), It is designed for long term use up to several years. (Real-world battery life depends on the use environment, update period and uplink method. Please check related Power Analyze report).
27 27  
... ... @@ -46,7 +46,6 @@
46 46  * 8500mAh Battery for long term use
47 47  * Nano SIM card slot for NB-IoT SIM
48 48  
49 -
50 50  == 1.3 Specification ==
51 51  
52 52  
... ... @@ -106,7 +106,6 @@
106 106  * STOP Mode: 10uA @ 3.3v
107 107  * Max transmit power: 350mA@3.3v
108 108  
109 -
110 110  == 1.4 Applications ==
111 111  
112 112  
... ... @@ -117,9 +117,6 @@
117 117  * Smart Cities
118 118  * Smart Factory
119 119  
120 -
121 -
122 -
123 123  == 1.5 Sleep mode and working mode ==
124 124  
125 125  
... ... @@ -136,7 +136,7 @@
136 136  
137 137  
138 138  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
139 -|=(% style="width: 167px;background-color:#D9E2F3;color:#0070C0" %)**Behavior on ACT**|=(% style="width: 117px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 225px;background-color:#D9E2F3;color:#0070C0" %)**Action**
134 +|=(% style="width: 167px;background-color:#4F81BD;color:white" %)**Behavior on ACT**|=(% style="width: 117px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width:225px;background-color:#4F81BD;color:white" %)**Action**
140 140  |(% style="width:167px" %)Pressing ACT between 1s < time < 3s|(% style="width:117px" %)Send an uplink|(% style="width:225px" %)(((
141 141  If sensor has already attached to NB-IoT network, sensor will send an uplink packet, (% style="color:blue" %)**blue led** (%%)will blink once.
142 142  Meanwhile, BLE module will be active and user can connect via BLE to configure device.
... ... @@ -148,7 +148,6 @@
148 148  )))
149 149  |(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means device is in Deep Sleep Mode.
150 150  
151 -
152 152  == 1.7 BLE connection ==
153 153  
154 154  
... ... @@ -189,6 +189,7 @@
189 189  
190 190  === 1.8.3 Reset Button ===
191 191  
186 +
192 192  Press to reboot the device.
193 193  
194 194  
... ... @@ -196,20 +196,26 @@
196 196  == 1.9 Hardware Variant ==
197 197  
198 198  
199 -(% border="1" cellspacing="5" style="width:472px" %)
200 -|=(% style="width: 102px;background-color:#D9E2F3;color:#0070C0" %)Model|=(% style="width: 190px;background-color:#D9E2F3;color:#0070C0" %)Photo|=(% style="width: 187px; background-color:#D9E2F3;color:#0070C0" %)Probe Info
194 +(% border="1" cellspacing="5" style="width:410px" %)
195 +|=(% style="width: 102px;background-color:#4F81BD;color:white" %)Model|=(% style="width: 126px; background-color:#4F81BD;color:white" %)Photo|=(% style="width: 179px;background-color:#4F81BD;color:white" %)Probe Info
201 201  |(% style="width:102px" %)(((
202 202  S31-LB
203 -)))|(% style="width:190px" %)[[image:image-20230527093214-2.jpeg]]|(% style="width:187px" %)(((
198 +)))|(% style="width:126px" %)(((
199 +(% style="text-align:center" %)
200 +[[image:image-20230819110632-6.png||height="130" width="104"]]
201 +)))|(% style="width:179px" %)(((
204 204  1 x SHT31 Probe
205 205  
206 -Cable Length : 2 meters
204 +Cable Length : 3 meters
207 207  
208 208  
209 209  )))
210 210  |(% style="width:102px" %)(((
211 211  S31B-LB
212 -)))|(% style="width:190px" %)[[image:image-20230527093155-1.jpeg]]|(% style="width:187px" %)(((
210 +)))|(% style="width:126px" %)(((
211 +(% style="text-align:center" %)
212 +[[image:image-20230819110702-7.png||height="164" width="90"]]
213 +)))|(% style="width:179px" %)(((
213 213  1 x SHT31 Probe
214 214  
215 215  Installed in device.
... ... @@ -219,635 +219,350 @@
219 219  
220 220  
221 221  
222 -== 1.9 Mechanical ==
223 223  
224 += 2. Use S31-NB to communicate with IoT Server =
224 224  
225 -[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143884058-338.png]]
226 +== 2.1 Send data to IoT server via NB-IoT network ==
226 226  
227 227  
228 -[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143899218-599.png]]
229 +The S31-NB is equipped with a NB-IoT module, the pre-loaded firmware in S31-NB will get environment data from sensors and send the value to local NB-IoT network via the NB-IoT module.  The NB-IoT network will forward this value to IoT server via the protocol defined by S31-NB.
229 229  
230 230  
231 -[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143909447-639.png]]
232 +Below shows the network structure:
232 232  
234 +[[image:1692415924540-357.png]]
233 233  
234 -= 2. Configure S31x-LB to connect to LoRaWAN network =
235 235  
236 -== 2.1 How it works ==
237 +There are two version: (% style="color:blue" %)**-GE**(%%) and (% style="color:blue" %)**-1D**(%%) version of S31-NB.
237 237  
238 238  
239 -The S31x-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the S31x-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
240 +(% style="color:blue" %)**GE Version**(%%): This version doesn’t include SIM card or point to any IoT server. User needs to use AT Commands to configure below two steps to set S31-NB send data to IoT server.
240 240  
242 +1. Install NB-IoT SIM card and configure APN. See instruction of [[Attach Network>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H2.AttachNetwork]].
241 241  
242 -== 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
244 +1. Set up sensor to point to IoT Server. See instruction of [[Configure to Connect Different Servers>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.Configuretoconnecttodifferentservers]]. 
243 243  
246 +Below shows result of different server as a glance.
244 244  
245 -Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example.
246 246  
247 -The LPS8V2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
249 +(% border="1" cellspacing="4" style="width:515px" %)
250 +|(% style="background-color:#4f81bd; color:white; width:100px" %)**Servers**|(% style="background-color:#4f81bd; color:white; width:300px" %)**Dash Board**|(% style="background-color:#4f81bd; color:white; width:115px" %)**Comments**
251 +|(% style="width:127px" %)[[Node-Red>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.5A0Node-RedA028viaA0MQTT29]]|(% style="width:385px" %)[[image:image-20230819113244-8.png||height="183" width="367"]]|(% style="width:170px" %)
252 +|(% style="width:127px" %)[[DataCake>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.4Datacake]]|(% style="width:385px" %)[[image:image-20230819113244-9.png||height="120" width="369"]]|(% style="width:170px" %)
253 +|(% style="width:127px" %)[[Tago.IO>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.7A0Tago.ioA028viaA0MQTT29]]|(% style="width:385px" %) |(% style="width:170px" %)
254 +|(% style="width:127px" %)[[General UDP>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.1GeneralA0UDPA0Connection]]|(% style="width:385px" %)Raw Payload. Need Developer to design Dash Board|(% style="width:170px" %)
255 +|(% style="width:127px" %)[[General MQTT>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.2GeneralA0MQTTA0Connection]]|(% style="width:385px" %)Raw Payload. Need Developer to design Dash Board|(% style="width:170px" %)
256 +|(% style="width:127px" %)[[ThingSpeak>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.3A0ThingSpeakA028viaA0MQTT29]]|(% style="width:385px" %)[[image:image-20230819113244-10.png||height="82" width="291"]]|(% style="width:170px" %)
257 +|(% style="width:127px" %)[[ThingsBoard>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.6A0ThingsBoard.CloudA028viaA0MQTT29]]|(% style="width:385px" %)[[image:image-20230819113244-11.png||height="113" width="293"]]|(% style="width:170px" %)
258 +|(% style="width:127px" %) |(% style="width:385px" %) |(% style="width:170px" %)
248 248  
260 +(% style="color:blue" %)**1D Version**(%%): This version has 1NCE SIM card pre-installed and configure to send value to DataCake. User Just need to select the sensor type in DataCake and Activate S31-NB and user will be able to see data in DataCake. See here for [[DataCake Config Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.4Datacake]].
249 249  
250 -(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from S31x-LB.
251 251  
252 -Each S31x-LB is shipped with a sticker with the default device EUI as below:
263 +== 2.2 ​Payload Types ==
253 253  
254 -[[image:image-20230426084152-1.png||alt="图片-20230426084152-1.png" height="233" width="502"]]
255 255  
266 +To meet different server requirement, S31-NB supports different payload type.
256 256  
257 -You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:
268 +**Includes:**
258 258  
270 +* [[General JSON format payload>>path:#General_Json]]. (Type=5)
259 259  
260 -(% style="color:blue" %)**Register the device**
272 +* [[HEX format Payload>>path:#HEX_Payload]]. (Type=0)
261 261  
262 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/1654935135620-998.png?rev=1.1||alt="1654935135620-998.png"]]
274 +* [[ThingSpeak Format>>path:#ThingSpeak_Payload]]. (Type=1)
263 263  
276 +* [[ThingsBoard Format>>path:#ThingsBoard_Payload]]. (Type=3)
264 264  
265 -(% style="color:blue" %)**Add APP EUI and DEV EUI**
278 +User can specify the payload type when choose the connection protocol. Example:
266 266  
267 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-4.png?width=753&height=551&rev=1.1||alt="图片-20220611161308-4.png"]]
280 +(% style="color:#037691" %)**AT+PRO=2,0**  (%%) ~/~/ Use UDP Connection & hex Payload
268 268  
282 +(% style="color:#037691" %)**AT+PRO=2,5**   (%%) ~/~/ Use UDP Connection & Json Payload
269 269  
270 -(% style="color:blue" %)**Add APP EUI in the application**
284 +(% style="color:#037691" %)**AT+PRO=3,5 ** (%%) ~/~/ Use MQTT Connection & Json Payload
271 271  
272 272  
273 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-5.png?width=742&height=601&rev=1.1||alt="图片-20220611161308-5.png"]]
287 +=== 2.2.1 General Json Format (Type~=5) ===
274 274  
275 275  
276 -(% style="color:blue" %)**Add APP KEY**
290 +This is the General Json Format. As below:
277 277  
278 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-6.png?width=744&height=485&rev=1.1||alt="图片-20220611161308-6.png"]]
292 +(% style="color:#4472c4" %)**{"IMEI":866207053462762,"temperature":29.2,"humidity":54.2,"battery":3.27,"signal":24,"Model":S31x-NB, "1":{28.2,48.3,2023/08/10 08:00:37},"2":{28.1,49.1,2023/08/10 07:57:37},"3":{28.1,48.5,2023/08/10 07:54:37},"4":{28.2,48.6,2023/08/10 07:51:37},"5":{28.1,48.9,2023/08/10 07:48:37},"6":{28.2,48.8,2023/08/10 07:45:37},"7":{28.2,48.8,2023/08/10 07:42:37},"8":{28.0,48.8,2023/08/10 07:39:37}}**
279 279  
280 280  
281 -(% style="color:blue" %)**Step 2:**(%%) Activate on S31x-LB
295 +(% style="color:red" %)**Notice, from above payload:**
282 282  
297 +* Temperature , Humidity , Battery & Signal are the value at uplink time.
283 283  
284 -Press the button for 5 seconds to activate the S31x-LB.
299 +* Json entry 1 ~~ 8 are the last 1 ~~ 8 sampling data as specify by (% style="color:#037691" %)**AT+NOUD=8 ** (%%)Command. Each entry includes (from left to right): Temperature, Humidity, Sampling time.
285 285  
286 -(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:blue" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network. (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
287 287  
288 -After join success, it will start to upload messages to TTN and you can see the messages in the panel.
302 +=== 2.2.2 HEX format Payload(Type~=0) ===
289 289  
290 290  
291 -== 2.3 ​Uplink Payload ==
305 +This is the HEX Format. As below:
292 292  
293 -=== 2.3.1 Device Status, FPORT~=5 ===
307 +(% style="color:#4472c4" %)**f86620705346276200640cba16010000000011011801e864d49c2d011a01e364d49925011901eb64d49871011901e564d497bd011a01e664d49709011901e964d49655011a01e864d495a1011a01e864d494ed011801e864d49439**
294 294  
309 +[[image:1692424009971-458.png]]
295 295  
296 -Users can use the downlink command(**0x26 01**) to ask S31x-LB to send device configure detail, include device configure status. S31x-LB will uplink a payload via FPort=5 to server.
297 297  
298 -The Payload format is as below.
312 +(% style="color:blue" %)**Version:**
299 299  
314 +These bytes include the hardware and software version.
300 300  
301 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
302 -|(% colspan="6" style="background-color:#d9e2f3; color:#0070c0" %)**Device Status (FPORT=5)**
303 -|(% style="width:103px" %)**Size (bytes)**|(% style="width:72px" %)**1**|**2**|(% style="width:91px" %)**1**|(% style="width:86px" %)**1**|(% style="width:44px" %)**2**
304 -|(% style="width:103px" %)**Value**|(% style="width:72px" %)Sensor Model|Firmware Version|(% style="width:91px" %)Frequency Band|(% style="width:86px" %)Sub-band|(% style="width:44px" %)BAT
316 +(% style="color:#037691" %)**Higher byte:**(%%) Specify Sensor Model: 0x00 for S31B-NB & S31-NB
305 305  
306 -Example parse in TTNv3
318 +(% style="color:#037691" %)**Lower byte:**(%%) Specify the software version: 0x64=100, means firmware version 100
307 307  
308 -[[image:image-20230524144422-1.png||height="174" width="1080"]]
309 309  
321 +(% style="color:blue" %)**BAT (Battery Info):**
310 310  
311 -(% style="color:#037691" %)**Sensor Model**(%%): For S31x-LB, this value is 0x0A
323 +Ex1: 0x0CBA = 3258mV
312 312  
313 -(% style="color:#037691" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
314 314  
315 -(% style="color:#037691" %)**Frequency Band**:
326 +(% style="color:blue" %)**Signal Strength:**
316 316  
317 -0x01: EU868
328 +NB-IoT Network signal Strength.
318 318  
319 -0x02: US915
330 +**Ex1: 0x16 = 22**
320 320  
321 -0x03: IN865
332 +**0**  -113dBm or less
322 322  
323 -0x04: AU915
334 +**1**  -111dBm
324 324  
325 -0x05: KZ865
336 +**2...30** -109dBm... -53dBm
326 326  
327 -0x06: RU864
338 +**31**   -51dBm or greater
328 328  
329 -0x07: AS923
340 +**99**    Not known or not detectable
330 330  
331 -0x08: AS923-1
332 332  
333 -0x09: AS923-2
343 +(% style="color:blue" %)**Temperature: **
334 334  
335 -0x0a: AS923-3
336 -
337 -0x0b: CN470
338 -
339 -0x0c: EU433
340 -
341 -0x0d: KR920
342 -
343 -0x0e: MA869
344 -
345 -
346 -(% style="color:#037691" %)**Sub-Band**:
347 -
348 -AU915 and US915:value 0x00 ~~ 0x08
349 -
350 -CN470: value 0x0B ~~ 0x0C
351 -
352 -Other Bands: Always 0x00
353 -
354 -
355 -(% style="color:#037691" %)**Battery Info**:
356 -
357 -Check the battery voltage.
358 -
359 -Ex1: 0x0B45 = 2885mV
360 -
361 -Ex2: 0x0B49 = 2889mV
362 -
363 -
364 -=== 2.3.2  Sensor Data. FPORT~=2 ===
365 -
366 -
367 -Sensor Data is uplink via FPORT=2
368 -
369 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)
370 -|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)(((
371 -**Size(bytes)**
372 -)))|=(% style="width: 40px;background-color:#D9E2F3;color:#0070C0" %)2|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)4|=(% style="width: 150px; background-color: #D9E2F3;color:#0070C0" %)1|=(% style="width: 80px; background-color: #D9E2F3;color:#0070C0" %)**2**|=(% style="width: 80px; background-color: #D9E2F3;color:#0070C0" %)2
373 -|(% style="width:99px" %)Value|(% style="width:69px" %)(((
374 -Battery
375 -)))|(% style="width:130px" %)(((
376 -Unix TimeStamp
377 -)))|(% style="width:194px" %)(((
378 -Alarm Flag & MOD& Level of PA8
379 -)))|(% style="width:106px" %)(((
380 -Temperature
381 -)))|(% style="width:97px" %)(((
382 -Humidity
383 -)))
384 -
385 -[[image:image-20230524144456-2.png||height="180" width="1142"]]
386 -
387 -
388 -==== (% style="color:#4472c4" %)**Battery**(%%) ====
389 -
390 -Sensor Battery Level.
391 -
392 -Ex1: 0x0B45 = 2885mV
393 -
394 -Ex2: 0x0B49 = 2889mV
395 -
396 -
397 -==== (% style="color:#4472c4" %)**Temperature**(%%) ====
398 -
399 -**Example**:
400 -
401 401  If payload is: 0105H:  (0105 & 8000 == 0), temp = 0105H /10 = 26.1 degree
402 402  
403 403  If payload is: FF3FH :  (FF3F & 8000 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
404 404  
405 -（FF3F & 8000：Judge whether the highest bit is 1, when the highest bit is 1, it is negative）
349 +(FF3F & 8000：Judge whether the highest bit is 1, when the highest bit is 1, it is negative)
406 406  
407 407  
408 -==== (% style="color:#4472c4" %)**Humidity**(%%) ====
352 +(% style="color:blue" %)**Humidity:   **
409 409  
354 +Read:0295(H)=661(D)    Value:  661 / 10=66.1, So 66.1%
410 410  
411 -Read:0x(0197)=412    Value:  412 / 10=41.2, So 41.2%
412 412  
357 +(% style="color:blue" %)**TimeStamp:   **
413 413  
414 -==== (% style="color:#4472c4" %)**Alarm Flag & MOD & Level of PA8**(%%) ====
359 +Unit TimeStamp Example: 64d49439(H) = 1691653177(D)
415 415  
361 +Put the decimal value into this link(https:~/~/www.epochconverter.com/) to get the time.
416 416  
417 -**Example:**
418 418  
419 -If payload & 0x01 = 0x01  **~-~->** This is an Alarm Message.It means that the temperature and humidity exceed the alarm value or trigger an interrupt.
364 +=== 2.2.3 ThingsBoard Payload(Type~=3) ===
420 420  
421 -If payload & 0x01 = 0x00  **~-~->** This is a normal uplink message, no alarm.
422 422  
423 -If payload & 0x80>>7 = 0x01  **~-~->** The PA8 is low level.
367 +Type3 payload special design for ThingsBoard, it will also configure other default server to ThingsBoard.
424 424  
425 -If payload & 0x80>>7 =0x00  **~-~->** The PA8 is high level.
369 +(% style="color:#4472c4" %)**{"IMEI":866207053462762,"temperature":29.2,"humidity":54.2,"battery":3.27,"signal":24}**
426 426  
427 -If payload >> 2 = 0x00  **~-~->**  means MOD=1, This is a sampling uplink message.
428 428  
429 -If payload >> 2 = 0x31  **~-~->**  means MOD=31, this message is a reply message for polling, this message contains the alarm settings. see [[this link>>path:#HPolltheAlarmsettings:]] for detail. 
372 +=== 2.2.4 ThingSpeak Payload(Type~=1) ===
430 430  
431 431  
432 -== 2.4 Payload Decoder file ==
375 +This payload meets ThingSpeak platform requirement. It includes only four fields. Form 1~~4 are:
433 433  
377 +Temperature, Humidity, Battery & Signal. This payload type only valid for ThingsSpeak Platform
434 434  
435 -In TTN, use can add a custom payload so it shows friendly reading
379 +As below:
436 436  
437 -In the page (% style="color:#037691" %)**Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder**(%%) to add the decoder from:
381 +(% style="color:#4472c4" %)**field1=27.9&field2=49.9&field3=3.23&field4=28**
438 438  
439 -[[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/S31-LB%26S31B-LB>>https://github.com/dragino/dragino-end-node-decoder/tree/main/S31-LB%26S31B-LB]]
440 440  
384 +== 2.3 Test Uplink and Change Update Interval ==
441 441  
442 -== 2.5 Datalog Feature ==
443 443  
387 +By default, Sensor will send uplinks (% style="color:blue" %)**every 2 hours**(%%) & AT+NOUD=8
444 444  
445 -Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, S31x-LB will store the reading for future retrieving purposes.
389 +User can use below commands to change the (% style="color:blue" %)**uplink interval**.
446 446  
391 +(% style="color:#037691" %)**AT+TDC=600 ** (%%) ~/~/ Set Update Interval to 600s
447 447  
448 -=== 2.5.1 Ways to get datalog via LoRaWAN ===
393 +User can also push the button for more than 1 seconds to activate an uplink.
449 449  
450 450  
451 -Set [[PNACKMD=1>>||anchor="H2.5.4DatalogUplinkpayload28FPORT3D329"]], S31x-LB will wait for ACK for every uplink, when there is no LoRaWAN network,S31x-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
396 +== 2.4 Multi-Samplings and One uplink ==
452 452  
453 -* (((
454 -a) S31x-LB will do an ACK check for data records sending to make sure every data arrive server.
455 -)))
456 -* (((
457 -b) S31x-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but S31x-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if S31x-LB gets a ACK, S31x-LB will consider there is a network connection and resend all NONE-ACK messages.
458 -)))
459 459  
460 -Below is the typical case for the auto-update datalog feature (Set PNACKMD=1)
399 +To save battery life, S31-NB will sample temperature & humidity data every 15 minutes and send one uplink every 2 hours. So each uplink it will include 8 stored data + 1 real-time data. They are defined by:
461 461  
462 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="图片-20220703111700-2.png" height="381" width="1119"]]
401 +* (% style="color:#037691" %)**AT+TR=900**   (%%) ~/~/ The unit is seconds, and the default is to record data once every 900 seconds (15 minutes, the minimum can be set to 180 seconds)
463 463  
403 +* (% style="color:#037691" %)**AT+NOUD=8**     (%%)~/~/  The device uploads 8 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
464 464  
465 -=== 2.5.2 Unix TimeStamp ===
405 +The diagram below explains the relationship between TR, NOUD, and TDC more clearly:
466 466  
407 +[[image:1692424376354-959.png]]
467 467  
468 -S31x-LB uses Unix TimeStamp format based on
469 469  
470 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="图片-20220523001219-11.png" height="97" width="627"]]
410 +== 2.5 Humidity and Temperature alarm function ==
471 471  
472 -User can get this time from link:  [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/]] :
473 473  
474 -Below is the converter example
413 +On each sampling define by AT+TR ( default 900s or 15 minutes), when the value exceed the range, it will trigger an Alarm and immediately sends a uplink.
475 475  
476 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-12.png?width=720&height=298&rev=1.1||alt="图片-20220523001219-12.png" height="298" width="720"]]
477 477  
416 +(% style="color:blue" %)**AT Commands:**
478 478  
479 -So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25
418 +(% style="color:#037691" %)**AT+ SHHUM=min,max**
480 480  
420 +Example: AT+ SHHUM=50,80  ~/~/ Alarm when humidity lower than 50 or higher than 80.
481 481  
482 -=== 2.5.3 Set Device Time ===
483 483  
423 +(% style="color:#037691" %)**AT+ SHTEMP=min,max**
484 484  
485 -User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.
425 +Example: AT+ SHTEMP=20,30  ~/~/ Alarm when temperature lower than 20 or higher than 30
486 486  
487 -Once S31x-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to S31x-LB. If S31x-LB fails to get the time from the server, S31x-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
488 488  
489 -(% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.**
428 +(% style="color:red" %)**Notice:**
490 490  
430 +* To disable Alarm, user can set min and max to same value , such as (% style="color:#037691" %)**AT+SHTEMP=0,0.**
491 491  
492 -=== 2.5.4 Datalog Uplink payload (FPORT~=3) ===
432 +* If user only want to send only min or max, user can set the alarm to a value that device won’t reach. For example: (% style="color:#037691" %)**AT+SHTEMP=-80,0.**
493 493  
494 494  
495 -The Datalog uplinks will use below payload format.
435 +== 2.6 Trggier an uplink by external interrupt ==
496 496  
497 -**Retrieval data payload:**
498 498  
499 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)
500 -|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)(((
501 -**Size(bytes)**
502 -)))|=(% style="width: 40px; background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 55px; background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 65px; background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 180px; background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 100px; background-color:#D9E2F3;color:#0070C0" %)**4**
503 -|(% style="width:103px" %)Value|(% style="width:68px" %)(((
504 -ignore
505 -)))|(% style="width:104px" %)(((
506 -(((
507 -Humidity
508 -)))
438 +S31-NB has an external trigger interrupt function. Users can use the PB15 pin to trigger the upload of data packets.
509 509  
510 -(((
511 -
512 -)))
513 -)))|(% style="width:87px" %)(((
514 -Temperature
515 -)))|(% style="width:178px" %)(((
516 -Poll message flag & Alarm Flag& Level of PA8
517 -)))|(% style="width:137px" %)Unix Time Stamp
440 +(% style="color:blue" %)**AT command:**
518 518  
519 -**Poll message flag & Alarm Flag & Level of PA8:**
442 +* (% style="color:#037691" %)**AT+INTMOD **(%%) ~/~/ Set the trigger interrupt mode
520 520  
521 -[[image:image-20230524114302-1.png||height="115" width="736"]]
444 +* (% style="color:#037691" %)**AT+INTMOD=0 **(%%) ~/~/ Disable Interrupt
522 522  
446 +* (% style="color:#037691" %)**AT+INTMOD=1 **(%%) ~/~/ Trigger by rising and falling edge
523 523  
524 -**No ACK Message**:  1: This message means this payload is fromn Uplink Message which doesn't get ACK from the server before ( for **PNACKMD=1** feature)
448 +* (% style="color:#037691" %)**AT+INTMOD=2 **(%%) ~/~/ Trigger by falling edge
525 525  
526 -**Poll Message Flag**: 1: This message is a poll message reply.
450 +* (% style="color:#037691" %)**AT+INTMOD=3  **(%%) ~/~/ Trigger by rising edge
527 527  
528 -* Poll Message Flag is set to 1.
452 += 3. Configure S31x-NB =
529 529  
530 -* Each data entry is 11 bytes, to save airtime and battery, devices will send max bytes according to the current DR and Frequency bands.
531 -
532 -For example, in US915 band, the max payload for different DR is:
533 -
534 -**a) DR0:** max is 11 bytes so one entry of data
535 -
536 -**b) DR1:** max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
537 -
538 -**c) DR2:** total payload includes 11 entries of data
539 -
540 -**d) DR3: **total payload includes 22 entries of data.
541 -
542 -If devise doesn't have any data in the polling time. Device will uplink 11 bytes of 0   
543 -
544 -**Example:**
545 -
546 -If S31x-LB has below data inside Flash:
547 -
548 -[[image:image-20230524114654-2.png]]
549 -
550 -
551 -If user sends below downlink command: 31646D84E1646D856C05
552 -
553 -Where : Start time: 646D84E1 = time 23/5/24 03:30:41
554 -
555 - Stop time: 646D856C= time 23/5/24 03:33:00
556 -
557 -
558 -**S31x-LB will uplink this payload.**
559 -
560 -[[image:image-20230524114826-3.png||height="448" width="1244"]]
561 -
562 -(((
563 -00 00 02 36 01 10 40 64 6D 84 E1 00 00 02 37 01 10 40 64 6D 84 F8 00 00 02 37 01 0F 40 64 6D 85 04 00 00 02 3A 01 0F 40 64 6D 85 18 00 00 02 3C 01 0F 40 64 6D 85 36 00 00 02 3D 01 0E 40 64 6D 85 3F 00 00 02 3F 01 0E 40 64 6D 85 60 00 00 02 40 01 0E 40 64 6D 85 6A
564 -)))
565 -
566 -(((
567 -Where the first 11 bytes is for the first entry:
568 -)))
569 -
570 -(((
571 -00 00 02 36 01 10 40 64 6D 84 E1
572 -)))
573 -
574 -(((
575 -**Hum**=0x0236/10=56.6
576 -)))
577 -
578 -(((
579 -**Temp**=0x0110/10=27.2
580 -)))
581 -
582 -(((
583 -**poll message flag & Alarm Flag & Level of PA8**=0x40,means reply data,sampling uplink message,the PA8 is low level.
584 -)))
585 -
586 -(((
587 -**Unix time** is 0x646D84E1=1684899041s=23/5/24 03:30:41
588 -)))
589 -
590 -
591 -(% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" data-widget="image" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="单击并拖动以调整大小" %)的(% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" data-widget="image" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="单击并拖动以调整大小" %)的
592 -
593 -== 2.6 Temperature Alarm Feature ==
594 -
595 -
596 -S31x-LB work flow with Alarm feature.
597 -
598 -
599 -[[image:image-20230524110125-3.png||height="768" width="1115"]]
600 -
601 -
602 -
603 -== 2.7 Frequency Plans ==
604 -
605 -
606 -The S31x-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
607 -
608 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/]]
609 -
610 -
611 -== 2.8 ​Firmware Change Log ==
612 -
613 -
614 -**Firmware download link: **[[https:~~/~~/www.dropbox.com/sh/fis3g6nmhv0eokg/AAC6BcCZaX4BdqZkduUvZ3jIa?dl=0>>https://www.dropbox.com/sh/fis3g6nmhv0eokg/AAC6BcCZaX4BdqZkduUvZ3jIa?dl=0]]
615 -
616 -
617 -= 3. Configure S31x-LB =
618 -
619 619  == 3.1 Configure Methods ==
620 620  
621 621  
622 -S31x-LB supports below configure method:
457 +S31x-NB supports below configure method:
623 623  
624 624  * AT Command via Bluetooth Connection (**Recommended**): [[BLE Configure Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
460 +
625 625  * AT Command via UART Connection : See [[UART Connection>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H2.3UARTConnectionforSN50v3basemotherboard]].
626 -* LoRaWAN Downlink.  Instruction for different platforms: See [[IoT LoRaWAN Server>>http://wiki.dragino.com/xwiki/bin/view/Main/]] section.
627 627  
463 +== 3.2 AT Commands Set ==
628 628  
629 -== 3.2 General Commands ==
630 630  
466 +AT+<CMD>?        : Help on <CMD>
631 631  
632 -These commands are to configure:
468 +AT+<CMD>         : Run <CMD>
633 633  
634 -* General system settings like: uplink interval.
635 -* LoRaWAN protocol & radio related command.
470 +AT+<CMD>=<value> : Set the value
636 636  
637 -They are same for all Dragino Devices which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:
472 +AT+<CMD>=?       : Get the value
638 638  
639 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
640 640  
475 +(% style="color:blue" %)**General Commands**      
641 641  
642 -== 3.3 Commands special design for S31x-LB ==
477 +AT                    : Attention       
643 643  
479 +AT?  : Short Help     
644 644  
645 -These commands only valid for S31x-LB, as below:
481 +ATZ  : MCU Reset    
646 646  
483 +AT+TDC  : Application Data Transmission Interval
647 647  
648 -=== 3.3.1 Set Transmit Interval Time ===
485 +AT+CFG  : Print all configurations
649 649  
487 +AT+CFGMOD           : Working mode selection
650 650  
651 -Feature: Change LoRaWAN End Node Transmit Interval.
489 +AT+DEUI  : Get or set the Device ID
652 652  
653 -(% style="color:blue" %)**AT Command: AT+TDC**
491 +AT+INTMOD            : Set the trigger interrupt mode
654 654  
655 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
656 -|=(% style="width: 156px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 137px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="background-color:#D9E2F3;color:#0070C0" %)**Response**
657 -|(% style="width:156px" %)AT+TDC=?|(% style="width:137px" %)Show current transmit Interval|(((
658 -30000
659 -OK
660 -the interval is 30000ms = 30s
661 -)))
662 -|(% style="width:156px" %)AT+TDC=60000|(% style="width:137px" %)Set Transmit Interval|(((
663 -OK
664 -Set transmit interval to 60000ms = 60 seconds
665 -)))
493 +AT+5VT           : Set extend the time of 5V power  
666 666  
667 -(% style="color:blue" %)**Downlink Command: 0x01**
495 +AT+PRO          : Choose agreement
668 668  
669 -Format: Command Code (0x01) followed by 3 bytes time value.
497 +AT+RXDL  : Extend the sending and receiving time
670 670  
671 -If the downlink payload=0100003C, it means set the END Node's Transmit Interval to 0x00003C=60(S), while type code is 01.
499 +AT+DNSCFG  : Get or Set DNS Server
672 672  
673 -* Example 1: Downlink Payload: 0100001E  ~/~/  Set Transmit Interval (TDC) = 30 seconds
674 -* Example 2: Downlink Payload: 0100003C  ~/~/  Set Transmit Interval (TDC) = 60 seconds
501 +AT+GETSENSORVALUE   : Returns the current sensor measurement
675 675  
503 +AT+NOUD  : Get or Set the number of data to be uploaded
676 676  
677 -=== 3.3.2 Get Device Status ===
505 +AT+CDP     : Read or Clear cached data
678 678  
507 +AT+SHTEMP:  Get or Set alarm of temp
679 679  
680 -Send a LoRaWAN downlink to ask device send Alarm settings.
509 +AT+SHHUM:  Get or Set alarm of moisture
681 681  
682 -(% style="color:blue" %)**Downlink Payload:  **(%%)0x26 01
511 +AT+SERVADDR :  Server Address
683 683  
684 -Sensor will upload Device Status via FPORT=5. See payload section for detail.
685 685  
514 +(% style="color:blue" %)**UDP Management**
686 686  
687 -=== 3.3.3 Set Temperature Alarm Threshold ===
516 +AT+CFM  :  Upload confirmation mode (only valid for UDP)
688 688  
689 689  
690 -* (% style="color:blue" %)**AT Command:**
519 +(% style="color:blue" %)**MQTT Management**
691 691  
692 -(% style="color:#037691" %)**AT+SHTEMP=min,max**
521 +AT+CLIENT               : Get or Set MQTT client
693 693  
694 -* When min=0, and max≠0, Alarm higher than max
695 -* When min≠0, and max=0, Alarm lower than min
696 -* When min≠0 and max≠0, Alarm higher than max or lower than min
523 +AT+UNAME              : Get or Set MQTT Username
697 697  
698 -Example:
525 +AT+PWD                  : Get or Set MQTT password
699 699  
700 - AT+SHTEMP=0,30   ~/~/ Alarm when temperature higher than 30.
527 +AT+PUBTOPIC  : Get or Set MQTT publish topic
701 701  
702 -* (% style="color:blue" %)**Downlink Payload:**
529 +AT+SUBTOPIC  : Get or Set MQTT subscription topic
703 703  
704 -(% style="color:#037691" %)**0x(0C 01 00 1E)**  (%%) ~/~/ Set AT+SHTEMP=0,30
705 705  
706 -(% style="color:red" %)**(note: 3^^rd^^ byte= 0x00 for low limit(not set), 4^^th^^ byte = 0x1E for high limit: 30)**
532 +(% style="color:blue" %)**Information**          
707 707  
534 +AT+FDR  : Factory Data Reset
708 708  
709 -=== 3.3.4 Set Humidity Alarm Threshold ===
536 +AT+PWORD  : Serial Access Password
710 710  
538 +AT+LDATA  : Get the last upload data
711 711  
712 -* (% style="color:blue" %)**AT Command:**
540 +AT+CDP  : Read or Clear cached data
713 713  
714 -(% style="color:#037691" %)**AT+SHHUM=min,max**
715 715  
716 -* When min=0, and max≠0, Alarm higher than max
717 -* When min≠0, and max=0, Alarm lower than min
718 -* When min≠0 and max≠0, Alarm higher than max or lower than min
719 -
720 -Example:
721 -
722 - AT+SHHUM=70,0  ~/~/ Alarm when humidity lower than 70%.
723 -
724 -* (% style="color:blue" %)**Downlink Payload:**
725 -
726 -(% style="color:#037691" %)**0x(0C 02 46 00)**(%%)  ~/~/ Set AT+SHTHUM=70,0
727 -
728 -(% style="color:red" %)**(note: 3^^rd^^ byte= 0x46 for low limit (70%), 4^^th^^ byte = 0x00 for high limit (not set))**
729 -
730 -
731 -=== 3.3.5 Set Alarm Interval ===
732 -
733 -
734 -The shortest time of two Alarm packet. (unit: min)
735 -
736 -* (% style="color:blue" %)**AT Command:**
737 -
738 -(% style="color:#037691" %)**AT+ATDC=30** (%%) ~/~/ The shortest interval of two Alarm packets is 30 minutes, Means is there is an alarm packet uplink, there won't be another one in the next 30 minutes.
739 -
740 -* (% style="color:blue" %)**Downlink Payload:**
741 -
742 -(% style="color:#037691" %)**0x(0D 00 1E)**(%%)     **~-~--> ** Set AT+ATDC=0x 00 1E = 30 minutes
743 -
744 -
745 -=== 3.3.6 Get Alarm settings ===
746 -
747 -
748 -Send a LoRaWAN downlink to ask device send Alarm settings.
749 -
750 -* (% style="color:#037691" %)**Downlink Payload:  **(%%)0x0E 01
751 -
752 -**Example:**
753 -
754 -[[image:image-20230524110211-4.png]]
755 -
756 -**Explain:**
757 -
758 -* Alarm & MOD bit is 0x7C, 0x7C >> 2 = 0x31: Means this message is the Alarm settings message.
759 -
760 -
761 -=== 3.3.7 Set Interrupt Mode ===
762 -
763 -
764 -Feature, Set Interrupt mode for PA8 of pin.
765 -
766 -When AT+INTMOD=0 is set, PA8 is used as a digital input port.
767 -
768 -(% style="color:blue" %)**AT Command: AT+INTMOD**
769 -
770 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
771 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 197px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Response**
772 -|(% style="width:154px" %)AT+INTMOD=?|(% style="width:196px" %)Show current interrupt mode|(% style="width:157px" %)(((
773 -0
774 -OK
775 -the mode is 0 =Disable Interrupt
776 -)))
777 -|(% style="width:154px" %)AT+INTMOD=2|(% style="width:196px" %)(((
778 -Set Transmit Interval
779 -0. (Disable Interrupt),
780 -~1. (Trigger by rising and falling edge)
781 -2. (Trigger by falling edge)
782 -3. (Trigger by rising edge)
783 -)))|(% style="width:157px" %)OK
784 -
785 -(% style="color:blue" %)**Downlink Command: 0x06**
786 -
787 -Format: Command Code (0x06) followed by 3 bytes.
788 -
789 -This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
790 -
791 -* Example 1: Downlink Payload: 06000000  ~/~/  Turn off interrupt mode
792 -* Example 2: Downlink Payload: 06000003  ~/~/  Set the interrupt mode to rising edge trigger
793 -
794 -
795 -=== 3.3.8 Set Power Output Duration ===
796 -
797 -
798 -Control the output duration 5V . Before each sampling, device will
799 -
800 -~1. first enable the power output to external sensor,
801 -
802 -2. keep it on as per duration, read sensor value and construct uplink payload
803 -
804 -3. final, close the power output.
805 -
806 -(% style="color:blue" %)**AT Command: AT+5VT**
807 -
808 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
809 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 197px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Response**
810 -|(% style="width:154px" %)AT+5VT=?|(% style="width:196px" %)Show 5V open time.|(% style="width:157px" %)0 (default)
811 -OK
812 -|(% style="width:154px" %)AT+5VT=1000|(% style="width:196px" %)Close after a delay of 1000 milliseconds.|(% style="width:157px" %)OK
813 -
814 -(% style="color:blue" %)**Downlink Command: 0x07**
815 -
816 -Format: Command Code (0x07) followed by 2 bytes.
817 -
818 -The first and second bytes are the time to turn on.
819 -
820 -* Example 1: Downlink Payload: 070000  **~-~-->**  AT+5VT=0
821 -* Example 2: Downlink Payload: 0701F4  **~-~-->**  AT+5VT=500
822 -
823 -
824 824  = 4. Battery & Power Consumption =
825 825  
826 826  
827 -S31x-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
546 +S31x-NB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
828 828  
829 829  [[**Battery Info & Power Consumption Analyze**>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
830 830  
831 831  
832 -= 5. OTA Firmware update =
551 += 5. Firmware update =
833 833  
834 834  
835 -(% class="wikigeneratedid" %)
836 -User can change firmware S31x-LB to:
554 +User can change device firmware to::
837 837  
838 -* Change Frequency band/ region.
839 839  * Update with new features.
557 +
840 840  * Fix bugs.
841 841  
842 -Firmware and changelog can be downloaded from : **[[Firmware download link>>https://www.dropbox.com/sh/fis3g6nmhv0eokg/AAC6BcCZaX4BdqZkduUvZ3jIa?dl=0]]**
560 +Firmware and changelog can be downloaded from : **[[Firmware download link>>https://www.dropbox.com/sh/fhb3uyl4gt6clru/AAAiZVTFcxrfE1JOOyfcgO9ha?dl=0]]**
843 843  
844 -
845 845  Methods to Update Firmware:
846 846  
847 -* (Recommanded way) OTA firmware update via wireless : **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]**
564 +* (Recommended way) OTA firmware update via BLE: [[**Instruction**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/BLE_Firmware_Update_NB_Sensors_BC660K-GL/]].
848 848  * Update through UART TTL interface : **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
849 849  
850 -
851 851  = 6. FAQ =
852 852  
853 853  
... ... @@ -875,7 +875,6 @@
875 875  
876 876  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
877 877  
878 -
879 879  = 8. ​Packing Info =
880 880  
881 881  
... ... @@ -893,7 +893,6 @@
893 893  
894 894  * Weight / pcs : g
895 895  
896 -
897 897  = 9. Support =
898 898  
899 899  
... ... @@ -900,3 +900,5 @@
900 900  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
901 901  
902 902  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[Support@dragino.cc>>mailto:Support@dragino.cc]].
617 +
618 +(% style="display:none" %) (%%)
1692415924540-357.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +94.4 KB
Content
1692424009971-458.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +147.4 KB
Content
1692424376354-959.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +146.1 KB
Content
image-20230819110702-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +53.2 KB
Content
image-20230819113244-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +12.0 KB
Content
image-20230819113244-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +57.5 KB
Content
image-20230819113244-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +13.0 KB
Content
image-20230819113244-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +35.5 KB
Content