Skip to Content

Changes for page wiki_test

Last modified by Mengting Qiu on 2024/09/05 17:35
From version 69.1
edited by Xiaoling
on 2023/08/19 10:21
Change comment: Uploaded new attachment "image-20230819102136-3.png", version {1}
To version 80.2
edited by Xiaoling
on 2023/08/19 11:33
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -S31-NB/S31B-NB_BN-IoT_Outdoor_Temperature_Humidity_Sensor_User_Manual
1 +S31-NB/S31B-NB_BN-IoT Outdoor Temperature & Humidity Sensor User Manual
Content
... ... @@ -1,4 +1,5 @@
1 -[[image:image-20230819102012-1.png]][[image:image-20230819102029-2.png||height="604" width="604"]]
1 +(% style="text-align:center" %)
2 +[[image:image-20230819102136-3.png]]
2 2  
3 3  
4 4  
... ... @@ -13,46 +13,44 @@
13 13  
14 14  = 1. Introduction =
15 15  
16 -== 1.1 What is S31x-LB LoRaWAN Temperature & Humidity Sensor ==
17 +== 1.1 What is S31x-NB NB-IoT Temperature & Humidity Sensor ==
17 17  
18 18  
19 -The Dragino S31x-LB is a (% style="color:blue" %)**LoRaWAN Temperature and Humidity Sensor**(%%) for Internet of Things solution. It is used to measure the (% style="color:blue" %)**surrounding environment temperature and relative air humidity precisely**(%%), and then upload to IoT server via LoRaWAN wireless protocol.
20 +The Dragino S31-NB and S31B-NB are (% style="color:blue" %)**NB-IoT Temperature and Humidity Sensor**(%%) for Internet of Things solution. It is used to measure the surrounding (% style="color:blue" %)**environment temperature and relative air humidity precisely**(%%), and then upload to IoT server via NB-IoT network*.
20 20  
21 -The temperature & humidity sensor used in S31x-LB is SHT31, which is fully calibrated, linearized, and temperature compensated digital output from Sensirion, it provides a strong reliability and long-term stability. The SHT31 is fixed in a (% style="color:blue" %)**waterproof anti-condensation casing**(%%) for long term use.
22 +The temperature & humidity sensor used in S31-NB is SHT31, which is fully calibrated, linearized, and temperature compensated digital output from Sensirion, it provides a strong reliability and long-term stability. The SHT31 is fixed in a (% style="color:blue" %)**waterproof anti-condensation casing**(%%) for long term use.
22 22  
23 -The LoRa wireless technology used in S31x-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
24 +S31-NB supports different uplink methods include (% style="color:blue" %)**TCP, MQTT, UDP** for different application requirement. and Support Uplinks to various IoT Servers.
24 24  
25 -S31x-LB supports (% style="color:blue" %)**Temperature & Humdity alarm feature**(%%), user can set temperature alarm for instant notice. S31x-LB supports Datalog feature, it can save the data when there is no LoRaWAN network and uplink when network recover.
26 +S31-NB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), It is designed for long term use up to several years. (Real-world battery life depends on the use environment, update period and uplink method. Please check related Power Analyze report).
26 26  
27 -S31x-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
28 +*make sure you have NB-IoT coverage locally.
28 28  
29 -S31x-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
30 30  
31 -Each S31x-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
31 +[[image:1692411831805-116.png]]
32 32  
33 33  
34 34  == 1.2 ​Features ==
35 35  
36 36  
37 -* LoRaWAN 1.0.3 Class A
37 +* NB-IoT Bands: B1/B2/B3/B4/B5/B8/B12/B13/B17/B18/B19/B20/B25/B28/B66/B70/B85 @H-FDD
38 38  * Ultra-low power consumption
39 -* External 3 meters SHT31 probe (For S31-LB)
40 -* Measure range -55°C ~~ 125°C
39 +* External 3 meters SHT31 probe (For S31-NB)
40 +* Measure range -40°C ~~ 85°C
41 41  * Temperature & Humidity alarm
42 -* Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
43 -* Support Bluetooth v5.1 and LoRaWAN remote configure
44 -* Support wireless OTA update firmware
42 +* Multiply Sampling and one uplink
43 +* Support Bluetooth v5.1 remote configure and update firmware
45 45  * Uplink on periodically
46 46  * Downlink to change configure
47 47  * 8500mAh Battery for long term use
47 +* Nano SIM card slot for NB-IoT SIM
48 48  
49 -
50 50  == 1.3 Specification ==
51 51  
52 52  
53 53  (% style="color:#037691" %)**Common DC Characteristics:**
54 54  
55 -* Supply Voltage: built in 8500mAh Li-SOCI2 battery , 2.5v ~~ 3.6v
54 +* Supply Voltage: 2.1v ~~ 3.6v
56 56  * Operating Temperature: -40 ~~ 85°C
57 57  
58 58  (% style="color:#037691" %)**Temperature Sensor:**
... ... @@ -69,38 +69,67 @@
69 69  * Resolution: 0.01% RH
70 70  * Long Term Shift: <0.25 %RH/yr
71 71  
72 -(% style="color:#037691" %)**LoRa Spec:**
71 +(% style="color:#037691" %)**NB-IoT Spec:**
73 73  
74 -* Frequency Range,  Band 1 (HF): 862 ~~ 1020 Mhz
75 -* Max +22 dBm constant RF output vs.
76 -* RX sensitivity: down to -139 dBm.
77 -* Excellent blocking immunity
73 +**NB-IoT Module: BC660K-GL**
78 78  
75 +Support Bands:
76 +
77 +* B1 @H-FDD: 2100MHz
78 +* B2 @H-FDD: 1900MHz
79 +* B3 @H-FDD: 1800MHz
80 +* B4 @H-FDD: 2100MHz
81 +* B5 @H-FDD: 860MHz
82 +* B8 @H-FDD: 900MHz
83 +* B12 @H-FDD: 720MHz
84 +* B13 @H-FDD: 740MHz
85 +* B17 @H-FDD: 730MHz
86 +* B18 @H-FDD: 870MHz
87 +* B19 @H-FDD: 870MHz
88 +* B20 @H-FDD: 790MHz
89 +* B25 @H-FDD: 1900MHz
90 +* B28 @H-FDD: 750MHz
91 +* B66 @H-FDD: 2000MHz
92 +* B70 @H-FDD: 2000MHz
93 +* B85 @H-FDD: 700MHz
94 +
79 79  (% style="color:#037691" %)**Battery:**
80 80  
81 81  * Li/SOCI2 un-chargeable battery
82 82  * Capacity: 8500mAh
83 -* Self-Discharge: <1% / Year @ 25°C
99 +* Self Discharge: <1% / Year @ 25°C
84 84  * Max continuously current: 130mA
85 85  * Max boost current: 2A, 1 second
86 86  
87 87  (% style="color:#037691" %)**Power Consumption**
88 88  
89 -* Sleep Mode: 5uA @ 3.3v
90 -* LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
105 +* STOP Mode: 10uA @ 3.3v
106 +* Max transmit power: 350mA@3.3v
91 91  
108 +== 1.4 Applications ==
92 92  
93 -== 1.4 Sleep mode and working mode ==
94 94  
111 +* Smart Buildings & Home Automation
112 +* Logistics and Supply Chain Management
113 +* Smart Metering
114 +* Smart Agriculture
115 +* Smart Cities
116 +* Smart Factory
95 95  
118 +
119 +
120 +== 1.5 Sleep mode and working mode ==
121 +
122 +
96 96  (% style="color:blue" %)**Deep Sleep Mode: **(%%)Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.
97 97  
98 98  (% style="color:blue" %)**Working Mode:** (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
99 99  
100 100  
101 -== 1.5 Button & LEDs ==
102 102  
129 +== 1.6 Button & LEDs ==
103 103  
131 +
104 104  [[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675071855856-879.png]]
105 105  
106 106  
... ... @@ -107,23 +107,22 @@
107 107  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
108 108  |=(% style="width: 167px;background-color:#D9E2F3;color:#0070C0" %)**Behavior on ACT**|=(% style="width: 117px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 225px;background-color:#D9E2F3;color:#0070C0" %)**Action**
109 109  |(% style="width:167px" %)Pressing ACT between 1s < time < 3s|(% style="width:117px" %)Send an uplink|(% style="width:225px" %)(((
110 -If sensor is already Joined to LoRaWAN network, sensor will send an uplink packet, (% style="color:blue" %)**blue led** (%%)will blink once.
138 +If sensor has already attached to NB-IoT network, sensor will send an uplink packet, (% style="color:blue" %)**blue led** (%%)will blink once.
111 111  Meanwhile, BLE module will be active and user can connect via BLE to configure device.
112 112  )))
113 113  |(% style="width:167px" %)Pressing ACT for more than 3s|(% style="width:117px" %)Active Device|(% style="width:225px" %)(((
114 -(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:#037691" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network.
142 +(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:#037691" %)**OTA mode**(%%) for 3 seconds. And then start to attach NB-IoT network.
115 115  (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
116 -Once sensor is active, BLE module will be active and user can connect via BLE to configure device, no matter if device join or not join LoRaWAN network.
144 +Once sensor is active, BLE module will be active and user can connect via BLE to configure device, no matter if device attach NB-IoT network or not.
117 117  )))
118 118  |(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means device is in Deep Sleep Mode.
119 119  
148 +== 1.7 BLE connection ==
120 120  
121 -== 1.6 BLE connection ==
122 122  
151 +S31x-NB support BLE remote configure and firmware update.
123 123  
124 -S31x-LB support BLE remote configure.
125 125  
126 -
127 127  BLE can be used to configure the parameter of sensor or see the console output from sensor. BLE will be only activate on below case:
128 128  
129 129  * Press button to send an uplink
... ... @@ -133,28 +133,59 @@
133 133  If there is no activity connection on BLE in 60 seconds, sensor will shut down BLE module to enter low power mode.
134 134  
135 135  
136 -== 1.7 Pin Definitions ==
163 +== 1.8 Pin Definitions & Switch ==
137 137  
138 -[[image:http://8.211.40.43/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SN50v3-LB/WebHome/image-20230610163213-1.png?width=699&height=404&rev=1.1||alt="image-20230610163213-1.png"]]
139 139  
166 +S31x-NB use the mother board from S31-NB which as below.
140 140  
141 -== 1.8 Hardware Variant ==
168 +[[image:image-20230819104805-5.png]]
142 142  
143 143  
144 -(% border="1" cellspacing="5" style="width:472px" %)
145 -|=(% style="width: 102px;background-color:#D9E2F3;color:#0070C0" %)Model|=(% style="width: 190px;background-color:#D9E2F3;color:#0070C0" %)Photo|=(% style="width: 187px; background-color:#D9E2F3;color:#0070C0" %)Probe Info
171 +
172 +=== 1.8.1 Jumper JP2 ===
173 +
174 +
175 +Power on Device when put this jumper.
176 +
177 +
178 +=== 1.8.2 BOOT MODE / SW1 ===
179 +
180 +
181 +1) (% style="color:blue" %)**ISP**(%%): upgrade mode, device won't have any signal in this mode. but ready for upgrade firmware. LED won't work. Firmware won't run.
182 +
183 +2) (% style="color:blue" %)**Flash**(%%): work mode, device starts to work and send out console output for further debug
184 +
185 +
186 +=== 1.8.3 Reset Button ===
187 +
188 +
189 +Press to reboot the device.
190 +
191 +
192 +
193 +== 1.9 Hardware Variant ==
194 +
195 +
196 +(% border="1" cellspacing="5" style="width:410px" %)
197 +|=(% style="width: 102px;background-color:#D9E2F3;color:#0070C0" %)Model|=(% style="width: 126px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)Photo|=(% style="width: 179px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)Probe Info
146 146  |(% style="width:102px" %)(((
147 147  S31-LB
148 -)))|(% style="width:190px" %)[[image:image-20230527093214-2.jpeg]]|(% style="width:187px" %)(((
200 +)))|(% style="width:126px" %)(((
201 +(% style="text-align:center" %)
202 +[[image:image-20230819110632-6.png||height="130" width="104"]]
203 +)))|(% style="width:179px" %)(((
149 149  1 x SHT31 Probe
150 150  
151 -Cable Length : 2 meters
206 +Cable Length : 3 meters
152 152  
153 153  
154 154  )))
155 155  |(% style="width:102px" %)(((
156 156  S31B-LB
157 -)))|(% style="width:190px" %)[[image:image-20230527093155-1.jpeg]]|(% style="width:187px" %)(((
212 +)))|(% style="width:126px" %)(((
213 +(% style="text-align:center" %)
214 +[[image:image-20230819110702-7.png||height="164" width="90"]]
215 +)))|(% style="width:179px" %)(((
158 158  1 x SHT31 Probe
159 159  
160 160  Installed in device.
... ... @@ -164,29 +164,49 @@
164 164  
165 165  
166 166  
167 -== 1.9 Mechanical ==
168 168  
226 += 2. Use S31-NB to communicate with IoT Server =
169 169  
170 -[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143884058-338.png]]
228 +== 2.1 Send data to IoT server via NB-IoT network ==
171 171  
172 172  
173 -[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143899218-599.png]]
231 +The S31-NB is equipped with a NB-IoT module, the pre-loaded firmware in S31-NB will get environment data from sensors and send the value to local NB-IoT network via the NB-IoT module.  The NB-IoT network will forward this value to IoT server via the protocol defined by S31-NB.
174 174  
175 175  
176 -[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143909447-639.png]]
234 +Below shows the network structure:
177 177  
236 +[[image:1692415924540-357.png]]
178 178  
179 -= 2. Configure S31x-LB to connect to LoRaWAN network =
180 180  
181 -== 2.1 How it works ==
239 +There are two version: **-GE** and **-1D** version of S31-NB.
182 182  
183 183  
184 -The S31x-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the S31x-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
242 +**GE Version**: This version doesn’t include SIM card or point to any IoT server. User needs to use AT Commands to configure below two steps to set S31-NB send data to IoT server.
185 185  
244 +1. Install NB-IoT SIM card and configure APN. See instruction of [[Attach Network>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H2.AttachNetwork]].
245 +1. Set up sensor to point to IoT Server. See instruction of [[Configure to Connect Different Servers>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.Configuretoconnecttodifferentservers]].
186 186  
187 -== 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
247 +Below shows result of different server as a glance.
188 188  
189 189  
250 +|**Servers**|**Dash Board**|**Comments**
251 +|[[Node-Red>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.5A0Node-RedA028viaA0MQTT29]]|[[image:image-20230819113244-8.png]]|
252 +|[[DataCake>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.4Datacake]]|[[image:image-20230819113244-9.png]]|
253 +|[[Tago.IO>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.7A0Tago.ioA028viaA0MQTT29]]| |
254 +|[[General UDP>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.1GeneralA0UDPA0Connection]]|Raw Payload. Need Developer to design Dash Board|
255 +|[[General MQTT>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.2GeneralA0MQTTA0Connection]]|Raw Payload. Need Developer to design Dash Board|
256 +|[[ThingSpeak>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.3A0ThingSpeakA028viaA0MQTT29]]|[[image:image-20230819113244-10.png]]|
257 +|[[ThingsBoard>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.6A0ThingsBoard.CloudA028viaA0MQTT29]]|[[image:image-20230819113244-11.png]]|
258 +| | |
259 +
260 +
261 +
262 +**1D Version**: This version has 1NCE SIM card pre-installed and configure to send value to DataCake. User Just need to select the sensor type in DataCake and Activate S31-NB and user will be able to see data in DataCake. See here for [[DataCake Config Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.4Datacake]].
263 +
264 +
265 +== 2.2 ​Payload Types ==
266 +
267 +
190 190  Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example.
191 191  
192 192  The LPS8V2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
... ... @@ -570,7 +570,6 @@
570 570  * AT Command via UART Connection : See [[UART Connection>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H2.3UARTConnectionforSN50v3basemotherboard]].
571 571  * LoRaWAN Downlink.  Instruction for different platforms: See [[IoT LoRaWAN Server>>http://wiki.dragino.com/xwiki/bin/view/Main/]] section.
572 572  
573 -
574 574  == 3.2 General Commands ==
575 575  
576 576  
... ... @@ -618,7 +618,6 @@
618 618  * Example 1: Downlink Payload: 0100001E  ~/~/  Set Transmit Interval (TDC) = 30 seconds
619 619  * Example 2: Downlink Payload: 0100003C  ~/~/  Set Transmit Interval (TDC) = 60 seconds
620 620  
621 -
622 622  === 3.3.2 Get Device Status ===
623 623  
624 624  
... ... @@ -702,7 +702,6 @@
702 702  
703 703  * Alarm & MOD bit is 0x7C, 0x7C >> 2 = 0x31: Means this message is the Alarm settings message.
704 704  
705 -
706 706  === 3.3.7 Set Interrupt Mode ===
707 707  
708 708  
... ... @@ -736,7 +736,6 @@
736 736  * Example 1: Downlink Payload: 06000000  ~/~/  Turn off interrupt mode
737 737  * Example 2: Downlink Payload: 06000003  ~/~/  Set the interrupt mode to rising edge trigger
738 738  
739 -
740 740  === 3.3.8 Set Power Output Duration ===
741 741  
742 742  
... ... @@ -765,7 +765,6 @@
765 765  * Example 1: Downlink Payload: 070000  **~-~-->**  AT+5VT=0
766 766  * Example 2: Downlink Payload: 0701F4  **~-~-->**  AT+5VT=500
767 767  
768 -
769 769  = 4. Battery & Power Consumption =
770 770  
771 771  
... ... @@ -792,7 +792,6 @@
792 792  * (Recommanded way) OTA firmware update via wireless : **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]**
793 793  * Update through UART TTL interface : **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
794 794  
795 -
796 796  = 6. FAQ =
797 797  
798 798  
... ... @@ -820,7 +820,6 @@
820 820  
821 821  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
822 822  
823 -
824 824  = 8. ​Packing Info =
825 825  
826 826  
... ... @@ -838,7 +838,6 @@
838 838  
839 839  * Weight / pcs : g
840 840  
841 -
842 842  = 9. Support =
843 843  
844 844  
... ... @@ -845,3 +845,5 @@
845 845  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
846 846  
847 847  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[Support@dragino.cc>>mailto:Support@dragino.cc]].
918 +
919 +(% style="display:none" %) (%%)
1692411831805-116.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +94.4 KB
Content
1692413185538-164.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +777.4 KB
Content
1692415924540-357.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +94.4 KB
Content
image-20230819104725-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +583.4 KB
Content
image-20230819104805-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +582.8 KB
Content
image-20230819110632-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +224.4 KB
Content
image-20230819110702-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +53.2 KB
Content
image-20230819113244-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +12.0 KB
Content
image-20230819113244-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +57.5 KB
Content
image-20230819113244-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +13.0 KB
Content
image-20230819113244-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +35.5 KB
Content