Skip to Content

Changes for page wiki_test

Last modified by Mengting Qiu on 2024/09/05 17:35
From version 123.1
edited by Mengting Qiu
on 2023/11/14 16:50
Change comment: There is no comment for this version
To version 107.7
edited by Xiaoling
on 2023/10/11 11:08
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.ting
1 +XWiki.Xiaoling
Content
... ... @@ -22,19 +22,19 @@
22 22  
23 23  The DS03A-NB will send periodically data every 2 hours as well as for each door open/close action. It also counts the door open times and calculates the last door open duration. Users can also disable the uplink for each open/close event, instead, DS03A-NB can count each open event and uplink periodically.
24 24  
25 -DS03A-NB supports (% style="color:blue" %)**Datalog Feature,** (%%)it can save the data when there is no NB-IoT network and uplink when network recover.
25 +DS03A-LB supports (% style="color:blue" %)**Datalog Feature,** (%%)it can save the data when there is no NB-IoT network and uplink when network recover.
26 26  
27 -DS03A-NB has the (% style="color:blue" %)**Open Alarm Feature**,(%%) user can set this feature so the device will send an alarm if the door has been open for a certain time.
27 +DS03A-LB has the (% style="color:blue" %)**Open Alarm Feature**,(%%) user can set this feature so the device will send an alarm if the door has been open for a certain time.
28 28  
29 -DS03A-NB is designed for outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures
29 +DS03A-LB is designed for outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures
30 30  
31 -DS03A-NB supports different uplink methods including (% style="color:blue" %)**MQTT, MQTTs, UDP & TCP**(%%) for different application requirement, and support uplinks to various IoT Servers.
31 +SW3L-NB supports different uplink methods including (% style="color:blue" %)**MQTT, MQTTs, UDP & TCP**(%%) for different application requirement, and support uplinks to various IoT Servers.
32 32  
33 -DS03A-NB (% style="color:blue" %)**supports BLE configure **(%%)and(% style="color:blue" %)** OTA update**(%%) which make user easy to use.
33 +SW3L-NB (% style="color:blue" %)**supports BLE configure **(%%)and(% style="color:blue" %)** OTA update**(%%) which make user easy to use.
34 34  
35 -DS03A-NB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long-term use up to several years.
35 +SW3L-NB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long-term use up to several years.
36 36  
37 -DS03A-NB has optional built-in SIM card and default IoT server connection version. Which makes it works with simple configuration.
37 +SW3L-NB has optional built-in SIM card and default IoT server connection version. Which makes it works with simple configuration.
38 38  
39 39  [[image:image-20231011093807-6.png||height="278" width="879"]]
40 40  
... ... @@ -44,6 +44,7 @@
44 44  
45 45  * NB-IoT Bands: B1/B2/B3/B4/B5/B8/B12/B13/B17/B18/B19/B20/B25/B28/B66/B70/B85 @H-FDD
46 46  * Ultra-low power consumption
47 +* Upload water flow volume
47 47  * Door Open/Close detect
48 48  * Door open/close statistics
49 49  * Datalog Feature
... ... @@ -137,13 +137,10 @@
137 137  )))
138 138  |(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means device is in Deep Sleep Mode.
139 139  
140 -(% style="color:red" %)**Note: When the device is executing a program, the buttons may become invalid. It is best to press the buttons after the device has completed the program execution.**
141 -
142 -
143 143  == 1.7 BLE connection ==
144 144  
145 145  
146 -DS03A-NB support BLE remote configure and firmware update.
144 +SW3L-NB support BLE remote configure and firmware update.
147 147  
148 148  
149 149  BLE can be used to configure the parameter of sensor or see the console output from sensor. BLE will be only activate on below case:
... ... @@ -206,23 +206,25 @@
206 206  * Wood Door: 10mm ~~ 30mm
207 207  * Iron Door: 30 ~~ 45mm
208 208  
207 +
208 +
209 209  = 2. Use DS03A-NB to communicate with IoT Server =
210 210  
211 211  == 2.1 Send data to IoT server via NB-IoT network ==
212 212  
213 213  
214 -The DS03A-NB is equipped with a NB-IoT module, the pre-loaded firmware in DS03A-NB will get environment data from sensors and send the value to local NB-IoT network via the NB-IoT module.  The NB-IoT network will forward this value to IoT server via the protocol defined by DS03A-NB.
214 +The SW3L-NB is equipped with a NB-IoT module, the pre-loaded firmware in SW3L-NB will get environment data from sensors and send the value to local NB-IoT network via the NB-IoT module.  The NB-IoT network will forward this value to IoT server via the protocol defined by SW3L-NB.
215 215  
216 216  
217 217  Below shows the network structure:
218 218  
219 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/DS03A-NB_NB-IoT_Door_Sensor_User_Manual/WebHome/image-20231011093807-6.png?width=879&height=278&rev=1.1||alt="image-20231011093807-6.png"]]
219 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L-NB_NB-IoT_Flow_Sensor_User_Manual/WebHome/image-20231010091546-2.png?width=909&height=348&rev=1.1||alt="image-20231010091546-2.png"]]
220 220  
221 221  
222 -There are two version: (% style="color:blue" %)**-GE**(%%) and (% style="color:blue" %)**-1D**(%%) version of DS03A-NB.
222 +There are two version: (% style="color:blue" %)**-GE**(%%) and (% style="color:blue" %)**-1D**(%%) version of SW3L-NB.
223 223  
224 224  
225 -(% style="color:blue" %)**GE Version**(%%): This version doesn't include SIM card or point to any IoT server. User needs to use AT Commands to configure below two steps to set DS03A-NB send data to IoT server.
225 +(% style="color:blue" %)**GE Version**(%%): This version doesn't include SIM card or point to any IoT server. User needs to use AT Commands to configure below two steps to set SW3L-NB send data to IoT server.
226 226  
227 227  * Install NB-IoT SIM card and configure APN. See instruction of [[Attach Network>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H2.AttachNetwork]].
228 228  
... ... @@ -252,13 +252,13 @@
252 252  [[image:image-20230819113244-11.png||height="141" width="367"]]
253 253  )))|(% style="width:170px" %)
254 254  
255 -(% style="color:blue" %)**1D Version**(%%): This version has 1NCE SIM card pre-installed and configure to send value to DataCake. User Just need to select the sensor type in DataCake and Activate DS03A-NB and user will be able to see data in DataCake. See here for [[DataCake Config Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.4Datacake]].
255 +(% style="color:blue" %)**1D Version**(%%): This version has 1NCE SIM card pre-installed and configure to send value to DataCake. User Just need to select the sensor type in DataCake and Activate SW3L-NB and user will be able to see data in DataCake. See here for [[DataCake Config Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.4Datacake]].
256 256  
257 257  
258 258  == 2.2 ​Payload Types ==
259 259  
260 260  
261 -To meet different server requirement, DS03A-NB supports different payload type.
261 +To meet different server requirement, SW3L-NB supports different payload type.
262 262  
263 263  **Includes:**
264 264  
... ... @@ -284,10 +284,10 @@
284 284  
285 285  This is the General Json Format. As below:
286 286  
287 -(% style="color:#4472c4" %)**{"IMEI":"866207052559857","Model":"DS03A-NB","level status":1,"alarm status":0,"door open num":0,"last open time":0,"level status2":1,"alarm status2":0,"door open num2":0,"last open time2":0,"battery":3.48,"signal":24,"1":{1,0,0,2023/11/13 09:59:01},"2":{0,0,261,2023/11/13 03:20:00},"3":{237,9896971,263,2023/11/13 03:05:00},"4":{0,29,263,2023/11/13 02:20:12},"5":{215,9897015,268,2023/11/13 01:58:16},"6":{0,79,261,2023/11/13 01:43:16},"7":{227,9896991,5368540,2023/11/13 01:18:46},"8":{0,19,5367640,2023/11/11 08:53:57}}**
287 +(% style="color:#4472c4" %)**{"IMEI":"866207058378443","Model":"SW3L-NB","flow":217,"battery":3.54,"signal":24,"1":{221,2023/09/20 09:47:01},"2":{0,2023/09/20 09:15:04},"3":{0,2023/09/20 09:00:04},"4":{0,2023/09/20 08:45:03},"5":{0,2023/09/20 08:30:03},"6":{0,2023/09/20 08:15:03},"7":{0,2023/09/20 08:00:04},"8":{0,2023/09/20 07:45:04}}**
288 288  
289 289  
290 -[[image:image-20231113180055-1.png]]
290 +[[image:image-20230920175015-3.png||height="613" width="890"]]
291 291  
292 292  
293 293  (% style="color:red" %)**Notice, from above payload:**
... ... @@ -299,39 +299,23 @@
299 299  === 2.2.2 HEX format Payload(Type~=0) ===
300 300  
301 301  
302 -This is the HEX Format. HEX format Payload Single-channel and double-channel payload have different byte lengths.w
302 +This is the HEX Format. As below:
303 303  
304 +(% style="color:#4472c4" %)**f8662070583784430b640dda15010003a4650abc400000650ab8180000650ab4940000650ab10f0000650aad8b0000650aaa070000650aa6840000650aa3000000650a9308**
304 304  
305 -**The HEX format payload for the single-channel mode is as follows:**
306 +[[image:image-20230920172200-1.png||height="191" width="1047"]]
306 306  
307 -(% style="color:#4472c4" %)**f86620705255985712640d9c180101000000000000006551f424010000000000006551f36500000000000105655195e0ed97040b0001076551925c0000001d000107655187dcd797043700010c655182b80000004f00010565517f34e397041f51eadc655179760000001351e758654f4125**
308 308  
309 -[[image:image-20231114091247-2.png||height="186" width="1363"]]
310 -
311 -
312 312  If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the NB sensor uplink data.
313 313  
314 -[[image:image-20231114094432-3.png]]
311 +[[image:image-20230920173352-2.png||height="636" width="919"]]
315 315  
316 316  
317 -
318 -**The HEX format payload for the double-channel mode is as follows:**
319 -
320 -(% style="color:#4472c4" %)**f86620705255985712640db71701010000000000000001000000000000006552d13401000000000000000000000000006551f365000000000001050000005f00005f655195e0ed97040b0001070000005c00005c6551925c0000001d00010700000033000033655187dcd797043700010c00000033000033655182b80000004f0001050000003300003365517f34e397041f51eadc00000000000000655179760000001351e75800000000000000654f4125**
321 -
322 -[[image:image-20231114091229-1.png||height="180" width="1584"]]
323 -
324 -
325 -If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the NB sensor uplink data.
326 -
327 -[[image:image-20231114094838-5.png]]
328 -
329 -
330 330  (% style="color:blue" %)**Version:**
331 331  
332 332  These bytes include the hardware and software version.
333 333  
334 -(% style="color:#037691" %)**Higher byte:**(%%) Specify Sensor Model: 0x12 for DS03A-NB
318 +(% style="color:#037691" %)**Higher byte:**(%%) Specify Sensor Model: 0x11 for SW3L-NB
335 335  
336 336  (% style="color:#037691" %)**Lower byte:**(%%) Specify the software version: 0x64=100, means firmware version 1.0.0
337 337  
... ... @@ -370,11 +370,12 @@
370 370  
371 371  Type3 payload special design for ThingsBoard, it will also configure other default server to ThingsBoard.
372 372  
373 -(% style="color:#4472c4" %)** {"IMEI": "866207058378443","Model": "DS03A","flow": 502,"battery": 3.57,"signal": 23}**
357 +(% style="color:#4472c4" %)** {"IMEI": "866207058378443","Model": "SW3L","flow": 502,"battery": 3.57,"signal": 23}**
374 374  
375 375  [[image:image-20230922094043-2.png||height="558" width="851"]]
376 376  
377 377  
362 +
378 378  === 2.2.4 ThingSpeak Payload(Type~=1) ===
379 379  
380 380  
... ... @@ -384,334 +384,333 @@
384 384  
385 385  As below:
386 386  
387 -(% style="color:#4472c4" %)**field1=Flow value&field2=Battery value&field3=signal value**
372 +(% style="color:#4472c4" %)**field1=Flow value&field2=Battery value&field3=Singal value**
388 388  
389 -[[image:image-20231114165017-6.png]]
374 +[[image:image-20230921104741-1.png||height="565" width="826"]]
390 390  
391 -[[image:image-20231114165035-7.png||height="674" width="1036"]]
392 392  
393 -
394 394  == 2.3  ​Uplink Payload ==
395 395  
396 -=== 2.3.1  Sensor Configuration, FPORT~=4 ===
379 +=== 2.3.1 Sensor Configuration, FPORT~=4 ===
397 397  
398 398  
399 -DS03A-NB will only send this command after getting the downlink command **(0x26 02)** from the server.
382 +SW3L-NB will only send this command after getting the downlink command **(0x26 02)** from the server.
400 400  
401 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
402 -|(% colspan="8" style="background-color:#4f81bd; color:white; width:515px" %)**Sensor Configuration FPORT=4**
403 -|**Size(bytes)**|(% style="width:75px" %)**3**|(% style="width:50px" %)**1**|(% style="width:100px" %)**1**|(% style="width:90px" %)**2**|(% style="width:100px" %)**1**|(% style="width:100px" %)**2**|(% style="width:98px" %)**1**
404 -|**Value**|(% style="width:75px" %)TDC (unit:sec)|(% style="width:77px" %)Disalarm|(% style="width:96px" %)(((
405 -Keep status1
406 -)))|(% style="width:99px" %)(((
407 -Keep time1(unit: sec)
408 -)))|(% style="width:87px" %)Keep status2|(% style="width:97px" %)(((
409 -Keep time2(unit: sec)
410 -)))|(% style="width:98px" %)(((
411 -Alarm interval(unit: min)
412 -)))
384 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
385 +|(% style="background-color:#4f81bd; color:white; width:70px" %) **Size(bytes)**|(% style="background-color:#4f81bd; color:white; width:105px" %)**3**|(% style="background-color:#4f81bd; color:white; width:60px" %)**1**|(% style="background-color:#4f81bd; color:white; width:96px" %)**1**|(% style="background-color:#4f81bd; color:white; width:105px" %)**2**|(% style="background-color:#4f81bd; color:white; width:74px" %)**1**
386 +|**Value**|(% style="width:104px" %)TDC(unit:sec)|(% style="width:43px" %)N/A|(% style="width:91px" %)Stop Timer|(% style="width:100px" %)Alarm Timer|(% style="width:69px" %)Reserve
413 413  
414 414  Example parse in TTNv3
415 415  
416 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/DS03A-LB/WebHome/image-20230630155527-3.png?width=902&height=146&rev=1.1||alt="image-20230630155527-3.png"]]
390 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L-LB_LoRaWAN_Flow_Sensor_User_Manual/WebHome/image-20230614172555-4.png?width=853&height=151&rev=1.1||alt="image-20230614172555-4.png"]]
417 417  
418 418  
419 -* (((
420 -(% style="color:blue" %)**TDC: (default: 0x001C20)**
421 -)))
393 +* (% style="color:blue" %)**TDC: (default: 0x0004B0)**
422 422  
423 -Uplink interval for the Open/Close Event, default value is 0x001C20 which is 7200 seconds = 2 hours.
395 +Uplink interval for the total pulse count, default value is 0x0004B0 which is 1200 seconds = 20 minutes.
424 424  
425 425  
426 -* (((
427 -(% style="color:blue" %)**Disalarm: (default: 0)**
428 -)))
398 +* (% style="color:blue" %)**STOP Duration & Alarm Timer**
429 429  
430 - **If Disalarm = 1**, DS03A-NB will only send uplink at every TDC periodically. This is normally use for pulse meter application, in this application, there are many open/close event, and platform only care about the total number of pulse.
400 +Shows the configure value of [[Alarm for continuously water flow>>||anchor="H2.7Alarmforcontinuouslywaterflow"]]
431 431  
432 - **If Disalarm = 0**, DS03A-NB will send uplink at every TDC periodically and send data on each open/close event. This is useful for the application user need to monitor the open/close event in real-time.
433 433  
434 -(% style="color:red" %)** Note: When Disalarm=0, a high frequently open/close event will cause lots of uplink and drain battery very fast. **
403 +=== 2.3.2 Water Flow Value, Uplink FPORT~=2 ===
435 435  
436 436  
437 -* (((
438 -(% style="color:blue" %)**Keep Status1 & Keep Time1 & Keep Status2 & Keep Time2**
406 +(((
407 +SW3L-NB will send this uplink **after** Device Status once join the NB-IoT network successfully. And SW3L-NB will:
439 439  )))
440 440  
441 -Shows the configure value of [[Alarm Base on Timeout Feature>>||anchor="H2.9AlarmBaseonTimeout"]]
410 +(((
411 +periodically send this uplink every 20 minutes, this interval [[can be changed>>||anchor="H2.10SetTransmitIntervalTime"]].
412 +)))
442 442  
443 -
444 -* (((
445 -(% style="color:blue" %)**Alarm interval(default: 0)**
414 +(((
415 +Uplink Payload totals 11 bytes.
446 446  )))
447 447  
448 -When the state of the door sensor has not been changed after the timeout alarm, the device will send a uplink every alarm interval. It will stop the alarm until the state of the door sensor is changed after the timeout alarm.
418 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
419 +|=(% colspan="6" style="width: 515px; background-color:#4F81BD;color:white" %)**Water Flow Value,  FPORT=2**
420 +|(% style="width:50px" %)**Size(bytes)**|(% style="width:110px" %)**1**|(% style="width:120px" %)**4**|(% style="width:110px" %)**1**|(% style="width:55px" %)**1**|(% style="width:70px" %)**4**
421 +|(% style="width:110px" %)**Value**|(% style="width:81px" %)Calculate Flag & [[Alarm>>||anchor="H2.7Alarmforcontinuouslywaterflow"]]|(% style="width:95px" %)(((
422 +Total pulse Or Last Pulse
423 +)))|(% style="width:78px" %)(((
424 +MOD & PA4_status & PB15_status
425 +)))|(% style="width:92px" %)Reserve(0x01)|(% style="width:134px" %)Unix TimeStamp
449 449  
427 +**Calculate Flag & Alarm:**
450 450  
451 -=== 2.3.2  Real-Time Open/Close Status, Uplink FPORT~=2 ===
429 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)
430 +|(% style="background-color:#4f81bd; color:white; width:70px" %)**Size(bit)**|(% style="background-color:#4f81bd; color:white; width:70px" %)**[bit7:bit6]**|(% style="background-color:#4f81bd; color:white; width:90px" %)**[bit5:bit2]**|(% style="background-color:#4f81bd; color:white; width:140px" %)**bit1**|(% style="background-color:#4f81bd; color:white; width:130px" %)**bit0**
431 +|(% style="width:88px" %)**Value**|(% style="width:117px" %)Reserve|(% style="width:117px" %)Calculate Flag|(% style="width:169px" %)Alarm: 0: No Alarm; 1: Alarm|(% style="width:150px" %)TDC flag 0:No;1:Yes
452 452  
433 +**MOD & PA4_status & PB15_status:**
453 453  
454 -DS03A-NB will send this uplink **after** Device Status once join the LoRaWAN network successfully. And DS03A-NB will send uplinks when:
435 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:230px" %)
436 +|(% style="background-color:#4f81bd; color:white; width:50px" %)**Size(bit)**|(% style="background-color:#4f81bd; color:white; width:60px" %)**bit7**|(% style="background-color:#4f81bd; color:white; width:60px" %)**bit6**|(% style="background-color:#4f81bd; color:white; width:60px" %)**[bit5:bit0]**
437 +|(% style="width:88px" %)**Value**|(% style="width:117px" %)PA4_status|(% style="width:117px" %)PB15_status|(% style="width:118px" %)MOD
455 455  
456 -* Every 2 hours, this interval [[can be changed>>||anchor="H2.7SetTransmitIntervalTime"]].
457 -* There is an Open/Close event.  (This info can be disabled by AT+DISALARM=1)
439 +(% style="color:#037691" %)** **[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L-LB_LoRaWAN_Flow_Sensor_User_Manual/WebHome/image-20230626093242-1.png?width=892&height=276&rev=1.1||alt="image-20230626093242-1.png"]]
458 458  
459 -**1) When (% style="color:blue" %)AT+TTRCHANNEL=1(%%), Uplink Payload totals (% style="color:blue" %)11 bytes. (Default mode)(%%)**
460 460  
461 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
462 -|=(% colspan="5" style="background-color:#4F81BD;color:white;width:515px" %)**Real-Time Open/Close Status, FPORT=2**
463 -|(% style="width:94px" %)**Size(bytes)**|(% style="width:97px" %)**1**|(% style="width:95px" %)**3**|(% style="width:119px" %)**3**|(% style="width:107px" %)**4**
464 -|(% style="width:95px" %)**Value**|(% style="width:97px" %)(((
465 -Status & [[Alarm>>||anchor="2.10TTRIG126TTRIG2timeoutstatusalarm"]]
466 -)))|(% style="width:95px" %)Total open door events|(% style="width:119px" %)(((
467 -The last door open duration (unit: sec)
468 -)))|(% style="width:108px" %)Unix TimeStamp
442 +* (((
443 +(% style="color:blue" %)**Calculate Flag**
444 +)))
469 469  
470 -**Status & Alarm:**
446 +(((
447 +The calculate flag is a user defined field, IoT server can use this flag to handle different meters with different pulse factors. For example, if there are 100 Flow Sensors, meters 1 ~~50 are 1 liter/pulse and meters 51 ~~ 100 has 1.5 liter/pulse.
448 +)))
471 471  
472 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
473 -|(% style="background-color:#4f81bd; color:white; width:50px" %)**Size(bit)**|(% style="background-color:#4f81bd; color:white; width:60px" %)**[bit7:bit4]**|(% style="background-color:#4f81bd; color:white; width:80px" %)**bit3**|(% style="background-color:#4f81bd; color:white; width:100px" %)**bit2**|(% style="background-color:#4f81bd; color:white; width:120px" %)**bit1**|(% style="background-color:#4f81bd; color:white; width:105px" %)**bit0**
474 -|(% style="width:76px" %)**Value**|(% style="width:96px" %)Reserve|(% style="width:110px" %)(((
475 -Count mod
476 -)))|(% style="width:106px" %)TDC flag 0:No;1:Yes|(% style="width:148px" %)(((
477 -Alarm 0: No Alarm; 1: Alarm
478 -)))|(% style="width:131px" %)(((
479 -Status 0: Close; 1: Open
450 +(((
451 +**Example: in the default payload:**
480 480  )))
481 481  
482 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/DS03A-LB/WebHome/image-20230630155451-2.png?width=928&height=246&rev=1.1||alt="image-20230630155451-2.png"]]
483 -
484 -
485 485  * (((
486 -(% style="color:blue" %)**Count mod:Default=0**
455 +calculate flag=0: for SW3L-004 Flow Sensor: 450 pulse = 1 L
487 487  )))
488 -
489 -0: Uplink total open door times since factory
490 -
491 -1: Uplink total open door times since last FPORT=2 uplink.
492 -
493 -
494 -* (% style="color:blue" %)**TDC flag**
495 -
496 -When the flag is 1, it means sending packets at normal time intervals.
497 -
498 -Otherwise, it is a packet sent at non-TDC time.
499 -
500 -
501 501  * (((
502 -(% style="color:#0000ff" %)**Alarm**
458 +calculate flag=1: for SW3L-006 Flow Sensor: 390 pulse = 1 L
503 503  )))
504 -
505 -See [[Alarm Base on Timeout>>||anchor="H3.3.3A0AlarmBaseonTimeout"]]
506 -
507 -
508 508  * (((
509 -(% style="color:blue" %)**Status**
461 +calculate flag=2: for SW3L-010 Flow Sensor: 64 pulse = 1 L
510 510  )))
511 511  
512 -This bit is 1 when the door sensor is open and 0 when it is close.
513 -
514 -
515 -* (((
516 -(% style="color:blue" %)**Total open door events**
464 +(((
465 +Default value: 0. 
517 517  )))
518 518  
519 -Total pulse/counting base on open door.
468 +(((
469 +Range (4 bits): (b)0000 ~~ (b) 1111
520 520  
521 -Range (3 Bytes) : 0x000000 ~~ 0xFFFFFF . Max: 16777215
471 +If user use with a meter for example is 0.02L/pulse. To proper decode the correct value in server,
522 522  
473 +1) User can set the Calculate Flag of this sensor to 3.
523 523  
524 -* (((
525 -(% style="color:blue" %)**The last door open duration**
475 +2) In server side, when a sensor data arrive, the decoder will check the value of Calculate Flag, It the value is 3, the total volume = 0.02 x Pulse Count.
526 526  )))
527 527  
528 -Door sensor last open duration.
478 +(((
479 +(% style="color:red" %)**NOTE: User need to set Calculate Flag to proper value before use Flow Sensor. Downlink or AT Command see: **(%%)Refer: [[Set Calculate Flag>>||anchor="H2.8Setthecalculateflag"]]
529 529  
530 -Unit: sec.
481 +(((
482 +
483 +)))
484 +)))
531 531  
532 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/DS03A-LB/WebHome/image-20230701094042-1.png?width=763&height=154&rev=1.1||alt="image-20230701094042-1.png"]]
533 533  
487 +* (((
488 +(% style="color:blue" %)**Alarm**
489 +)))
534 534  
535 -**2) When (% style="color:blue" %)AT+TTRCHANNEL=2(%%), Uplink Payload totals (% style="color:blue" %)18 bytes(%%)**(% style="color:blue" %).
491 +(((
492 +See [[Alarm for continuously water flow>>||anchor="H2.7Alarmforcontinuouslywaterflow"]]
493 +)))
536 536  
537 -(When the maximum DR of some frequencies is 11 bytes, it will cause the server to receive empty packets)
495 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L%20LoRaWAN%20Outdoor%20Flow%20Sensor/WebHome/image-20220519095946-4.png?width=724&height=65&rev=1.1||alt="image-20220519095946-4.png"]]
538 538  
539 -(% style="color:red" %)**Note:When using the AT+TTRCHANNEL=2 command, the Datalog function cannot be used.**
540 540  
541 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
542 -|=(% colspan="8" style="background-color:#4F81BD;color:white; width: 515px;" %)**Real-Time Open/Close Status, FPORT=2**
543 -|(% style="width:50px" %)**Size(bytes)**|(% style="width:97px" %)**1**|(% style="width:95px" %)**3**|(% style="width:125px" %)**3**|(% style="width:100px" %)**4**|(% style="width:86px" %)**1**|(% style="width:96px" %)**3**|(% style="width:126px" %)**3**
544 -|(% style="width:95px" %)**Value**|(% style="width:97px" %)(((
545 -Status1 & Alarm1
546 -)))|(% style="width:95px" %)Total open door events1|(% style="width:125px" %)(((
547 -The last door open duration1 (unit: sec)
548 -)))|(% style="width:100px" %)Unix TimeStamp|(% style="width:86px" %)(((
549 -Status2 & Alarm2
550 -)))|(% style="width:96px" %)Total open door events2|(% style="width:126px" %)The last door open duration2 (unit: sec)
498 +(((
499 +* (% style="color:blue" %)**TDC flag**
551 551  
552 -**Status1 & Alarm1:**
501 +When the flag is 1, it means sending packets at normal time intervals.
553 553  
554 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:514px" %)
555 -|(% style="background-color:#4f81bd; color:white; width:50px" %)**Size(bit)**|(% style="background-color:#4f81bd; color:white; width:60px" %)**[bit7:bit4]**|(% style="background-color:#4f81bd; color:white; width:70px" %)**bit3**|(% style="background-color:#4f81bd; color:white; width:100px" %)**bit2**|(% style="background-color:#4f81bd; color:white; width:117px" %)**bit1**|(% style="background-color:#4f81bd; color:white; width:117px" %)**bit0**
556 -|(% style="width:76px" %)**Value**|(% style="width:96px" %)Reserve|(% style="width:99px" %)(((
557 -Count mod
558 -)))|(% style="width:103px" %)TDC flag 0:No;1:Yes|(% style="width:216px" %)(((
559 -Alarm1 0: No Alarm; 1: Alarm (PA8 of pin)
560 -)))|(% style="width:181px" %)(((
561 -Status1 0: Close; 1: Open (PA8 of pin)
503 +Otherwise, it is a packet sent at non-TDC time.
562 562  )))
563 563  
564 -**Status2 & Alarm2:**
506 +* (((
507 +(% style="color:blue" %)**Total pulse**
508 +)))
565 565  
566 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
567 -|(% style="background-color:#4f81bd; color:white; width:50px" %)**Size(bit)**|(% style="background-color:#4f81bd; color:white; width:60px" %)**[bit7:bit2]**|(% style="background-color:#4f81bd; color:white; width:200px" %)**bit1**|(% style="background-color:#4f81bd; color:white; width:200px" %)**bit0**
568 -|(% style="width:76px" %)**Value**|(% style="width:113px" %)Reserve|(% style="width:219px" %)(((
569 -Alarm2 0: No Alarm; 1: Alarm (PA4 of pin)
570 -)))|(% style="width:181px" %)(((
571 -Status2 0: Close; 1: Open (PA4 of pin)
510 +(((
511 +Total pulse/counting since factory
572 572  )))
573 573  
574 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/DS03A-LB/WebHome/image-20230630155908-6.png?width=927&height=295&rev=1.1||alt="image-20230630155908-6.png"]]
514 +(((
515 +Range (4 Bytes) : 0x00000000~~ 0xFFFFFFFF .
575 575  
517 +
518 +)))
576 576  
577 577  * (((
578 -(% style="color:blue" %)**Count mod:Default=0**
521 +(% style="color:blue" %)**Last Pulse**
579 579  )))
580 580  
581 -0: Uplink total open door times since factory
524 +(((
525 +Total pulse since last FPORT=2 uplink. (Default 20 minutes)
526 +)))
582 582  
583 -1: Uplink total open door times since last FPORT=2 uplink.
528 +(((
529 +Range (4 Bytes) : 0x00000000~~ 0xFFFFFFFF .
584 584  
585 585  
586 -* (% style="color:blue" %)**TDC flag**
532 +* (((
533 +(% style="color:blue" %)**PA4_status: Support digital level input below 3.3V**
534 +)))
587 587  
588 -When the flag is 1, it means sending packets at normal time intervals.
536 +(((
537 +0 ~-~-> PA4 is at low level.
538 +)))
589 589  
590 -Otherwise, it is a packet sent at non-TDC time.
540 +(((
541 +1 ~-~-> PA4 is at high level.
591 591  
592 592  
593 593  * (((
594 -(% style="color:#0000ff" %)**Alarm1 or Alarm2**
545 +(% style="color:blue" %)**PB15_status: Support digital level input below 3.3V**
595 595  )))
596 596  
597 -See [[Alarm Base on Timeout>>||anchor="H2.9AlarmBaseonTimeout"]]
548 +(((
549 +0 ~-~-> PB15 is at low level.
550 +)))
598 598  
552 +(((
553 +1 ~-~-> PB15 is at high level..
554 +)))
555 +)))
556 +)))
599 599  
600 600  * (((
601 -(% style="color:blue" %)**Status1 **(% style="color:#0000ff" %)**or **(% style="color:blue" %)**Status2**
559 +(% style="color:blue" %)**MOD: Default =0**
602 602  )))
603 603  
604 -This bit is 1 when the door sensor is open and 0 when it is close.
562 +(((
563 +MOD=0 ~-~-> Uplink Total Pulse since factory
564 +)))
605 605  
566 +(((
567 +MOD=1 ~-~-> Uplink total pulse since last FPORT=2 uplink.
606 606  
569 +
570 +)))
571 +
607 607  * (((
608 -(% style="color:blue" %)**Total open door events1 **(% style="color:#0000ff" %)**or**(% style="color:blue" %)** Total open door events2**
573 +(% style="color:blue" %)**Water Flow Value**
609 609  )))
610 610  
611 -Total pulse/counting base on open door.
576 +(((
577 +**Total Water Flow Volume = (Calculate Flag) x (Total Pulse)=9597/450=21.3L**
578 +)))
612 612  
613 -Range (3 Bytes) : 0x000000 ~~ 0xFFFFFF . Max: 16777215
580 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L%20LoRaWAN%20Outdoor%20Flow%20Sensor/WebHome/image-20220519095946-5.png?width=727&height=50&rev=1.1||alt="image-20220519095946-5.png"]]
614 614  
615 615  
616 -* (((
617 -(% style="color:blue" %)**The last door open duration1 **(% style="color:#0000ff" %)**or**(% style="color:blue" %)** The last door open duration2**
583 +(((
584 +**Total Water Flow for TDC timer = (Calculate Flag) x (Last Pulse)=79/450=0.2L**
618 618  )))
619 619  
620 -Door sensor last open duration.
587 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L%20LoRaWAN%20Outdoor%20Flow%20Sensor/WebHome/image-20220519095946-6.png?width=733&height=43&rev=1.1||alt="image-20220519095946-6.png"]] ** **
621 621  
622 -Unit: sec.
623 623  
624 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/DS03A-LB/WebHome/image-20230701094042-1.png?width=763&height=154&rev=1.1||alt="image-20230701094042-1.png"]]
590 +=== 2.3.3 Historical Water Flow Status, FPORT~=3 ===
625 625  
626 626  
627 -=== 2.3.3  Historical Door Open/Close Event, FPORT~=3 ===
593 +(((
594 +SW3L-NB stores sensor values and users can retrieve these history values via the downlink command.
595 +)))
628 628  
597 +(((
598 +The historical payload includes one or multiplies entries and every entry has the same payload as Real-Time water flow status.
629 629  
630 -DS03A-NB stores sensor values and users can retrieve these history values via the downlink command.
600 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
601 +|=(% colspan="6" style="width: 515px; background-color:#4F81BD;color:white" %)**Water Flow Value,  FPORT=3**
602 +|(% style="width:50px" %)**Size(bytes)**|(% style="width:110px" %)**1**|(% style="width:120px" %)**4**|(% style="width:110px" %)**1**|(% style="width:55px" %)**1**|(% style="width:70px" %)**4**
603 +|(% style="width:110px" %)**Value**|(% style="width:81px" %)Calculate Flag & [[Alarm>>||anchor="H2.7Alarmforcontinuouslywaterflow"]]|(% style="width:95px" %)(((
604 +Total pulse Or Last Pulse
605 +)))|(% style="width:78px" %)(((
606 +MOD & PA4_status & PB15_status
607 +)))|(% style="width:92px" %)Reserve(0x01)|(% style="width:134px" %)Unix TimeStamp
631 631  
632 -The historical payload includes one or multiplies entries and every entry has the same payload as Real-Time open/close status.
609 +**Calculate Flag & Alarm:**
633 633  
634 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
635 -|=(% colspan="5" style="background-color:#4F81BD;color:white;width:515px" %)**Real-Time Open/Close Status, FPORT=3**
636 -|(% style="width:60px" %)**Size(bytes)**|(% style="width:80px" %)**1**|(% style="width:120px" %)**3**|(% style="width:150px" %)**3**|(% style="width:90px" %)**4**
637 -|(% style="width:95px" %)**Value**|(% style="width:97px" %)(((
638 -Status & [[Alarm>>||anchor="H2.9A0AlarmBaseonTimeout"]]
639 -)))|(% style="width:95px" %)Total open door events|(% style="width:119px" %)(((
640 -The last door open duration (unit: sec)
641 -)))|(% style="width:108px" %)Unix TimeStamp
611 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
612 +|(% style="background-color:#4f81bd; color:white; width:50px" %)**Size(bit)**|(% style="background-color:#4f81bd; color:white; width:89px" %)**bit7**|(% style="background-color:#4f81bd; color:white; width:89px" %)**bit6**|(% style="background-color:#4f81bd; color:white; width:69px" %)**[bit5:bit2]**|(% style="background-color:#4f81bd; color:white; width:129px" %)**bit1**|(% style="background-color:#4f81bd; color:white; width:89px" %)**bit0**
613 +|(% style="width:88px" %)**Value**|(% style="width:96px" %)(((
614 +No ACK message
615 +)))|(% style="width:94px" %)Poll Message Flag|(% style="width:115px" %)Calculate Flag|(% style="width:136px" %)Alarm: 0: No Alarm; 1: Alarm|(% style="width:120px" %)TDC flag 0:No;1:Yes
642 642  
643 -**Status & Alarm:**
617 +**MOD & PA4_status & PB15_status:**
644 644  
645 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
646 -|(% style="background-color:#4f81bd; color:white; width:50px" %)**Size(bit)**|(% style="background-color:#4f81bd; color:white; width:75px" %)**bit7**|(% style="background-color:#4f81bd; color:white; width:65px" %)**bit6**|(% style="background-color:#4f81bd; color:white; width:50px" %)**[bit5:bit4]**|(% style="background-color:#4f81bd; color:white; width:50px" %)**bit3**|(% style="background-color:#4f81bd; color:white; width:70px" %)**bit2**|(% style="background-color:#4f81bd; color:white; width:80px" %)**bit1**|(% style="background-color:#4f81bd; color:white; width:75px" %)**bit0**
647 -|(% style="width:76px" %)**Value**|(% style="width:88px" %)No ACK message|(% style="width:92px" %)Poll Message Flag|(% style="width:89px" %)Reserve|(% style="width:90px" %)(((
648 -Count mod
649 -)))|(% style="width:95px" %)(((
650 -TDC flag 0:No; 1:Yes
651 -)))|(% style="width:116px" %)(((
652 -Alarm 0: No Alarm; 1: Alarm
653 -)))|(% style="width:112px" %)(((
654 -Status 0:Close; 1: Open
619 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:240px" %)
620 +|(% style="background-color:#4f81bd; color:white; width:60px" %)**Size(bit)**|(% style="background-color:#4f81bd; color:white; width:60px" %)**bit7**|(% style="background-color:#4f81bd; color:white; width:60px" %)**bit6**|(% style="background-color:#4f81bd; color:white; width:60px" %)**[bit5:bit0]**
621 +|(% style="width:88px" %)**Value**|(% style="width:117px" %)PA4_status|(% style="width:117px" %)PB15_status|(% style="width:118px" %)MOD
655 655  )))
656 656  
657 657  * (((
658 -Each data entry is 11 bytes and has the same structure as [[Real-Time open/close status>>||anchor="H2.3.2A0Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2"]], to save airtime and battery, DS03A-NB will send max bytes according to the current DR and Frequency bands.
625 +Each data entry is 11 bytes and has the same structure as [[real time water flow status>>||anchor="H2.3.2A0WaterFlowValue2CUplinkFPORT3D2"]], to save airtime and battery, SW3L will send max bytes according to the current DR and Frequency bands.
659 659  )))
660 660  
628 +(((
661 661  For example, in the US915 band, the max payload for different DR is:
630 +)))
662 662  
663 663  (((
664 -**~1. DR0**: max is 11 bytes so one entry of data
633 +(% style="color:blue" %)**a) DR0:**(%%) max is 11 bytes so one entry of data
665 665  )))
666 666  
667 667  (((
668 -**2. DR1**: max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
637 +(% style="color:blue" %)**b) DR1:**(%%) max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
669 669  )))
670 670  
671 671  (((
672 -**3. DR2**: total payload includes 11 entries of data
641 +(% style="color:blue" %)**c) DR2:**(%%) total payload includes 11 entries of data
673 673  )))
674 674  
675 675  (((
676 -**4. DR3**: total payload includes 22 entries of data.
645 +(% style="color:blue" %)**d) DR3:**(%%) total payload includes 22 entries of data.
677 677  )))
678 678  
679 -If DS03A-NB doesn't have any data in the polling time. It will uplink 11 bytes of 0
648 +(((
649 +If SW3L-NB doesn't have any data in the polling time. It will uplink 11 bytes of 0
680 680  
681 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/DS03A-LB/WebHome/image-20230630155556-4.png?width=938&height=146&rev=1.1||alt="image-20230630155556-4.png"]]
651 +
652 +)))
682 682  
683 -**Downlink:**
654 +(((
655 +(% style="color:#037691" %)**Downlink:**
656 +)))
684 684  
685 -0x31 64 9E 7D 34 64 9E 7E 9C 05
658 +(((
659 +0x31 64 92 C5 AC 64 92 C7 8C 05
660 +)))
686 686  
662 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L-LB_LoRaWAN_Flow_Sensor_User_Manual/WebHome/image-20230626093440-2.png?width=890&height=160&rev=1.1||alt="image-20230626093440-2.png"]]
687 687  
688 -**Uplink:**
689 689  
690 -45 00 00 00 00 00 00 64 9E 7D 48 40 00 00 00 00 00 63 64 9E 7D 9C 41 00 00 01 00 00 63 64 9E 7D A4 40 00 00 01 00 00 8D 64 9E 7E 31 43 00 00 02 00 00 8D 64 9E 7E 44 48 00 00 02 00 00 1F 64 9E 7E 59 4B 00 00 03 00 00 1F 64 9E 7E 6B
665 +(((
666 +(% style="color:#037691" %)**Uplink:**
667 +)))
691 691  
669 +(((
670 +41 00 01 00 00 00 08 64 92 C5 E4 40 00 01 00 00 00 08 64 92 C6 06 49 41 01 00 00 00 00 64 92 C6 8B 49 81 01 00 00 00 00 64 92 C7 34 4A 01 01 00 00 00 2D 64 92 C7 7C
692 692  
693 -**Parsed Value:**
672 +
673 +)))
694 694  
695 -[COUNTMOD, TDC_FLAG, ALARM,  DOOR_STATUS, OPEN_DOOR_TIMES, LAST_DOOR_OPEN_DURATION, TIME]
675 +(((
676 +(% style="color:#037691" %)**Parsed Value:**
677 +)))
696 696  
679 +(((
680 +[TDC_flag, Alarm, Calculate Flag, PA4_status, PB15_status, MOD, Total pulse or Last Pulse,** **Water Flow Value, TIME]
681 +)))
697 697  
698 -[SUM,YES,FALSE,OPEN,0,0,2023-06-30 06:59:20],
699 699  
700 -[SUM,NO,FALSE,CLOSE,0,99,2023-06-30 07:00:44],
684 +(((
685 +[YES,FALSE,0,L,L, 0,8, 0.0,2023-06-21 09:41:56],
701 701  
702 -[SUM,NO,FALSE,OPEN, 1,99,2023-06-30 07:00:52],
687 +[NO,FALSE,0,L,L, 0,8, 0.0,2023-06-21 09:42:30],
703 703  
704 -[SUM,NO,FALSE,CLOSE,1,141,2023-06-30 07:03:13],
689 +[YES,FALSE,2,L,H,1,0, 0.0,2023-06-21 09:44:43],
705 705  
706 -[SUM,NO,TRUE,OPEN, 2,141,2023-06-30 07:03:32],
691 +[YES,FALSE,2,H,L,1,0, 0.0,2023-06-21 09:47:32],
707 707  
708 -[PART,NO,FALSE,CLOSE,2,31,2023-06-30 07:03:53],
693 +[NO,TRUE ,2, L,L,1,45,0.7,2023-06-21 09:48:44],
694 +)))
709 709  
710 -[PART,NO,TRUE,OPEN, 3,31,2023-06-30 07:04:11],
696 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L-LB_LoRaWAN_Flow_Sensor_User_Manual/WebHome/image-20230626093703-3.png?width=894&height=156&rev=1.1||alt="image-20230626093703-3.png"]]
711 711  
712 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/DS03A-LB/WebHome/image-20230630172740-1.png?width=868&height=199&rev=1.1||alt="image-20230630172740-1.png"]]
713 713  
714 -
715 715  == 2.4 Test Uplink and Change Update Interval ==
716 716  
717 717  
... ... @@ -727,7 +727,7 @@
727 727  == 2.5 Multi-Samplings and One uplink ==
728 728  
729 729  
730 -To save battery life, DS03A-NB will sample Water Flow data every 15 minutes and send one uplink every 2 hours. So each uplink it will include 8 stored data + 1 real-time data. They are defined by:
714 +To save battery life, SW3L-NB will sample Water Flow data every 15 minutes and send one uplink every 2 hours. So each uplink it will include 8 stored data + 1 real-time data. They are defined by:
731 731  
732 732  * (% style="color:#037691" %)**AT+TR=900**   (%%) ~/~/ The unit is seconds, and the default is to record data once every 900 seconds (15 minutes, the minimum can be set to 180 seconds)
733 733  
... ... @@ -741,7 +741,7 @@
741 741  == 2.6 Trggier an uplink by external interrupt ==
742 742  
743 743  
744 -DS03A-NB has an external trigger interrupt function. Users can use the PB15 pin to trigger the upload of data packets.
728 +SW3L-NB has an external trigger interrupt function. Users can use the PB15 pin to trigger the upload of data packets.
745 745  
746 746  (% style="color:blue" %)**AT command:**
747 747  
... ... @@ -755,293 +755,167 @@
755 755  
756 756  * (% style="color:#037691" %)**AT+INTMOD=3  **(%%) ~/~/ Trigger by rising edge
757 757  
758 -== 2.7 Set Transmit Interval Time ==
742 +== 2.7 Alarm for continuously water flow ==
759 759  
760 760  
761 761  (((
762 -Feature: Change NB-IoT End Node Transmit Interval.
746 +This feature is to monitor and send Alarm for continuously water flow.
763 763  )))
764 764  
765 765  (((
766 -(% style="color:blue" %)**AT Command: AT+TDC**
750 +Example case is for Toilet water monitoring, if some one push toilet button, the toilet will have water flow. If the toilet button has broken and can't returned to original state, the water flow will keep for hours or days which cause huge waste for water.
767 767  )))
768 768  
769 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
770 -|=(% style="width: 156px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 137px;background-color:#4F81BD;color:white" %)**Function**|=(% style="background-color:#4F81BD;color:white" %)**Response**
771 -|(% style="width:156px" %)AT+TDC=?|(% style="width:137px" %)Show current transmit Interval|(((
772 -30000
773 -OK
774 -the interval is 30000ms = 30s
753 +(((
754 +To monitor this faulty and send alarm, there are two settings:
775 775  )))
776 -|(% style="width:156px" %)AT+TDC=60000|(% style="width:137px" %)Set Transmit Interval|(((
777 -OK
778 -Set transmit interval to 60000ms = 60 seconds
756 +
757 +* (((
758 +(% style="color:blue" %)**Stop Duration: Unit: Second**
779 779  )))
780 780  
781 781  (((
782 -(% style="color:blue" %)**Downlink Command: 0x01**
762 +Default: 15s, If SW3L-NB didn't see any water flow in 15s, SW3L-NB will consider stop of water flow event.
783 783  )))
784 784  
765 +* (((
766 +(% style="color:blue" %)**Alarm Timer: Units: Minute; Default 0 minutes (means Alarm disable)**
767 +)))
768 +
785 785  (((
786 -Format: Command Code (0x01) followed by 3 bytes time value.
770 +**Example:** 3 minutes, if SW3L-NB detect a start of water flow event and didn't detect a stop event within Alarm timer, SW3L-NB will send an Alarm to indicate a water flow abnormal alarm.
787 787  )))
788 788  
789 789  (((
790 -If the downlink payload=0100003C, it means set the END Node's Transmit Interval to 0x00003C=60(S), while type code is 01.
774 +So for example, If we set stop duration=15s and Alarm Timer=3minutes. If the toilet water flow continuously for more than 3 minutes, Sensor will send an alarm (in Confirmed MODE) to platform.
791 791  )))
792 792  
793 -* (((
794 -Example 1: Downlink Payload: 0100001E  ~/~/ Set Transmit Interval (TDC) = 30 seconds
777 +(((
778 +(% style="color:red" %)**Note:** **After this alarm is send, sensor will consider a stop of water flow and count for another new event. So if water flow waste last for 1 hour, Sensor will keep sending alarm every 3 minutes.**
795 795  )))
796 -* (((
797 -Example 2: Downlink Payload: 0100003C  ~/~/ Set Transmit Interval (TDC) = 60 seconds
798 798  
799 -
800 -
781 +(((
782 +(% style="color:blue" %)**AT Command to configure:**
801 801  )))
802 802  
803 -== 2.8 Enable / Disable Alarm ==
804 -
805 -
806 -Feature: Enable/Disable Alarm for open/close event. Default value 0.
807 -
808 -(% style="color:blue" %)**AT Command: **
809 -
810 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
811 -|(% style="background-color:#4f81bd; color:white; width:153px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:276px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:86px" %)**Response**
812 -|(% style="width:154px" %)AT+DISALARM=1|(% style="width:278px" %)End node will only send packets in TDC time.|OK
813 -|(% style="width:154px" %)AT+DISALARM=0|(% style="width:278px" %)End node will send packets in TDC time or status change for door sensor|OK
814 -
815 -(% style="color:blue" %)**Downlink Command: **
816 -
817 -0xA7 01  ~/~/ Same As AT+DISALARM=1
818 -
819 -0xA7 00  ~/~/ Same As AT+DISALARM=0
820 -
821 -
822 -== 2.9 Alarm Base on Timeout ==
823 -
824 -
825 -DS03A-NB can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
826 -
827 827  * (((
828 -(% style="color:blue" %)**Keep Status: Status to be monitor**
786 +AT+PTRIG=15,3  ~-~-> Set Stop duration: 15s, Alarm Timer: 3 minutes.
829 829  )))
830 830  
831 -(% style="color:#037691" %)**Keep Status = 1**(%%): Monitor Close to Open event
832 -
833 -(% style="color:#037691" %)**Keep Status = 0**(%%): Monitor Open to Close event
834 -
835 -
836 836  * (((
837 -(% style="color:blue" %)**Keep Time: Timeout to send an Alarm**
790 +AT+ PTRIG=15,0  ~-~-> Default Value, disable water waste Alarm.
838 838  )))
839 839  
840 -Range 0 ~~ 65535(0xFFFF) seconds.
793 +(((
794 +(% style="color:blue" %)**Downlink Command to configure:** 
795 +)))
841 841  
842 -If (% style="color:#037691" %)**keep time = 0**(%%), Disable Alarm Base on Timeout feature.
843 -
844 -If (% style="color:#037691" %)**keep time > 0**(%%), device will monitor the keep status event and send an alarm when status doesn't change after timeout.
845 -
846 -
847 -* (((
848 -(% style="color:blue" %)**Downlink Command**
797 +(((
798 +Command: **0xAA aa bb cc**
849 849  )))
850 850  
851 -(% style="color:#037691" %)**Command: 0xA9 aa bb cc dd**
852 -
853 -**A9:** Command Type Code
854 -
855 -**aa: **01:TTRIG1; 02:TTRIG2
856 -
857 -**bb:** status to be monitored
858 -
859 -**cc dd:** timeout.
860 -
861 -
862 -**1) AT+TTRIG1 : (PA8 of pin)**
863 -
864 -(% style="color:blue" %)**AT Command to configure:**
865 -
866 -* (((
867 -(% style="color:#037691" %)**AT+TTRIG1=1,30** (%%) **~-~->** When the **Keep Status** change from close to open, and device remains in open status for more than 30 seconds. DS03A-NB will send an uplink packet, the Alarm1 bit(the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
868 -
869 -(% style="color:#037691" %)**AT+TTRIG1=0,30** (%%) **~-~->** When the **Keep Status** change from open to close, and device remains in open status for more than 30 seconds. DS03A-NB will send an uplink packet, the Alarm1 bit (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
801 +(((
802 +AA: Command Type Code
870 870  )))
871 871  
872 -* (((
873 -(% style="color:#037691" %)**AT+TTRIG1=0,0**  (%%) **~-~-> ** Default Value, disable timeout Alarm.
874 -
875 -
805 +(((
806 +aa: Stop duration
876 876  )))
877 877  
878 -(% style="color:blue" %)**Downlink Command to configure:**
879 -
880 -If user send 0xA9 01 01 00 1E: equal to AT+TTRIG1=1,30 **or** 0xA9 01 00 00 00: Equal to AT+TTRIG1=0,0.
881 -
882 -
883 -**2) AT+TTRIG2 : (PA4 of pin,need to use AT+TTRCHANNEL=2)**
884 -
885 -(% style="color:blue" %)**AT Command to configure:**
886 -
887 -* (((
888 -(% style="color:#037691" %)**AT+TTRIG2=1,30** (%%) **~-~->** When the **Keep Status** change from close to open, and device remains in open status for more than 30 seconds. DS03A-NB will send an uplink packet, the Alarm2 bit (the second bit of 12^^st^^ byte of payload) on this uplink packet is set to 1.
889 -
890 -(% style="color:#037691" %)**AT+TTRIG2=0,30** (%%) **~-~->** When the **Keep Status** change from open to close, and device remains in open status for more than 30 seconds. DS03A-NB will send an uplink packet, the Alarm2 bit (the second bit of 12^^st^^ byte of payload) on this uplink packet is set to 1.
809 +(((
810 +bb cc: Alarm Timer
891 891  )))
892 892  
893 -* (((
894 -(% style="color:#037691" %)**AT+TTRIG2=0,0**  (%%) **~-~-> ** Default Value, disable timeout Alarm.
895 -
896 -
813 +(((
814 +If user send 0xAA 0F 00 03: equal to AT+PTRIG=15,3
897 897  )))
898 898  
899 -(% style="color:blue" %)**Downlink Command to configure:**
900 900  
901 -If user send 0xA9 02 00 00 1E: equal to AT+TTRIG2=0,30  **or**  0xA9 02 00 00 00: Equal to AT+TTRIG2=0,0.
818 +== 2.8 Set the calculate flag ==
902 902  
903 903  
904 -== 2.10 TTRIG1 & TTRIG2 timeout status alarm ==
821 +Feature: Set the calculate flag
905 905  
823 +(% style="color:blue" %)**AT Command: AT+CALCFLAG**
906 906  
907 -It needs to be used with AT+TTRIG1 or AT+TTRIG2. When TTRIG1 or TTRIG2 times out and causes an alarm, and the status does not change subsequently, an alarm packet will be sent at the alarm interval.
825 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:461px" %)
826 +|=(% style="width: 158px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 193px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 110px;background-color:#4F81BD;color:white" %)**Response**
827 +|(% style="width:158px" %)AT+CALCFLAG =1|(% style="width:192px" %)Set the calculate flag to 1.|(% style="width:109px" %)OK
828 +|(% style="width:158px" %)AT+CALCFLAG =2|(% style="width:192px" %)Set the calculate flag to 2.|(% style="width:109px" %)OK
908 908  
909 -(% style="color:blue" %)**AT Command:**
910 -
911 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
912 -|=(% style="width: 155px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 279px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 76px;background-color:#4F81BD;color:white" %)**Response**
913 -|(% style="width:155px" %)(((
914 -AT+TTRALARM=0
915 -)))|(% style="width:279px" %)(((
916 -disable continuous alarm
917 -)))|(% style="width:84px" %)(((
918 -OK
919 -)))
920 -|(% style="width:155px" %)(((
921 -AT+TTRALARM=60
922 -)))|(% style="width:279px" %)(((
923 -The alarm interval is 60 minutes (unit: minutes)
924 -)))|(% style="width:84px" %)(((
925 -OK
926 -)))
927 -
928 928  (% style="color:blue" %)**Downlink Command:**
929 929  
930 -Example:  0C aa  => AT+TTRALARM= aa
832 +* **Example**: 0XA501  ~/~/  Same as AT+CALCFLAG =1
931 931  
834 +== 2.9 Set count number ==
932 932  
933 -== 2.11 Count Mod ==
934 934  
837 +Feature: Manually set the count number
935 935  
936 -Feature: Manually set the count mode.
839 +(% style="color:blue" %)**AT Command: AT+SETCNT**
937 937  
938 -(% style="color:blue" %)**AT Command:**
841 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:479px" %)
842 +|=(% style="width: 160px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 223px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 96px;background-color:#4F81BD;color:white" %)**Response**
843 +|(% style="width:160px" %)AT+ SETCNT =0|(% style="width:221px" %)Set the count number to 0.|(% style="width:95px" %)OK
844 +|(% style="width:160px" %)AT+ SETCNT =100|(% style="width:221px" %)Set the count number to 100.|(% style="width:95px" %)OK
939 939  
940 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
941 -|=(% style="width: 154px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 275px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 86px;background-color:#4F81BD;color:white" %)**Response**
942 -|(% style="width:155px" %)(((
943 -AT+COUNTMOD=0
944 -)))|(% style="width:277px" %)(((
945 -the count value keeps accumulating mode
946 -)))|(% style="width:86px" %)(((
947 -OK
948 -)))
949 -|(% style="width:155px" %)(((
950 -AT+COUNTMOD=1
951 -)))|(% style="width:277px" %)(((
952 -the count value will be reset after each TDC time(Last Close Duration Reset after each uplink)
953 -)))|(% style="width:86px" %)(((
954 -OK
955 -)))
956 -
957 957  (% style="color:blue" %)**Downlink Command:**
958 958  
959 -Example:  0B aa  => AT+COUNTMOD = second byte
848 +* **Example**: 0xA6000001  ~/~/  Same as AT+ SETCNT =1
960 960  
850 +* **Example**: 0xA6000064  ~/~/  Same as AT+ SETCNT =100
961 961  
962 -== 2.12  Number of channel of door sensors ==
852 +== 2.10 Set Transmit Interval Time ==
963 963  
964 964  
965 -Feature: Set the number of door sensor channels.
855 +(((
856 +Feature: Change NB-IoT End Node Transmit Interval.
857 +)))
966 966  
967 -(% style="color:blue" %)**AT Command:**
859 +(((
860 +(% style="color:blue" %)**AT Command: AT+TDC**
861 +)))
968 968  
969 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)
970 -|=(% style="width: 155px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 288px; background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 57px;background-color:#4F81BD;color:white" %)**Response**
971 -|(% style="width:155px" %)(((
972 -AT+TTRCHANNEL=1
973 -)))|(% style="width:259px" %)(((
974 -Set as single channel, only use PA8 pin as interrupt pin.
975 -)))|(% style="width:44px" %)(((
863 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
864 +|=(% style="width: 156px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 137px;background-color:#4F81BD;color:white" %)**Function**|=(% style="background-color:#4F81BD;color:white" %)**Response**
865 +|(% style="width:156px" %)AT+TDC=?|(% style="width:137px" %)Show current transmit Interval|(((
866 +30000
976 976  OK
868 +the interval is 30000ms = 30s
977 977  )))
978 -|(% style="width:155px" %)(((
979 -AT+TTRCHANNEL=2
980 -)))|(% style="width:259px" %)(((
981 -Set as dual channel, use PA8 pin and PA4 pin as interrupt pin.
982 -)))|(% style="width:44px" %)(((
870 +|(% style="width:156px" %)AT+TDC=60000|(% style="width:137px" %)Set Transmit Interval|(((
983 983  OK
872 +Set transmit interval to 60000ms = 60 seconds
984 984  )))
985 985  
986 -(% style="color:blue" %)**Downlink Command:**
875 +(((
876 +(% style="color:blue" %)**Downlink Command: 0x01**
877 +)))
987 987  
988 -Example:  0D aa => AT+TTRCHANNEL = second byte
879 +(((
880 +Format: Command Code (0x01) followed by 3 bytes time value.
881 +)))
989 989  
883 +(((
884 +If the downlink payload=0100003C, it means set the END Node's Transmit Interval to 0x00003C=60(S), while type code is 01.
885 +)))
990 990  
991 -== 2.13  Clear the open door times and the duration of the last open door ==
992 -
993 -
994 -(% style="color:blue" %)**AT Command:**
995 -
996 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
997 -|=(% style="width: 163px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 290px; background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 57px;background-color:#4F81BD;color:white" %)**Response**
998 -|(% style="width:155px" %)AT+CLRC|(% style="width:259px" %)clear the open door times and the duration of the last open door.|(% style="width:44px" %)(((
999 -OK
887 +* (((
888 +Example 1: Downlink Payload: 0100001E  ~/~/ Set Transmit Interval (TDC) = 30 seconds
1000 1000  )))
890 +* (((
891 +Example 2: Downlink Payload: 0100003C  ~/~/ Set Transmit Interval (TDC) = 60 seconds
1001 1001  
1002 -(% style="color:blue" %)**Downlink Command:**(%%)0xA6 01
1003 1003  
1004 -The sensor will clear the open door times and the duration of the last open door.
1005 -
1006 -
1007 -== 2.14  Set the count value of the number of open door ==
1008 -
1009 -
1010 -(% style="color:blue" %)**AT Command:**
1011 -
1012 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)
1013 -|=(% style="width: 155px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 288px; background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 57px;background-color:#4F81BD;color:white" %)**Response**
1014 -|(% style="width:155px" %)(((
1015 -AT+SETCNT=1,100
1016 -)))|(% style="width:259px" %)(((
1017 -Set the open door times of PA8 pin to 100 times.
1018 -)))|(% style="width:44px" %)(((
1019 -OK
894 +
1020 1020  )))
1021 -|(% style="width:155px" %)AT+SETCNT=1,0|(% style="width:259px" %)Clear the open door times of PA8 pin.|(% style="width:44px" %)OK
1022 -|(% style="width:155px" %)(((
1023 -AT+SETCNT=2,50
1024 -)))|(% style="width:259px" %)(((
1025 -Set the open door times of PA4 pin to 100 times.
1026 -)))|(% style="width:44px" %)(((
1027 -OK
1028 -)))
1029 1029  
1030 -(% style="color:blue" %)**Downlink Command:**
897 += 3. Configure SW3L-NB =
1031 1031  
1032 -0xA6 01 00 00 64  ==>  AT+SETCNT=1,100
1033 -
1034 -0xA6 01 00 00 00  ==>  AT+SETCNT=1,0
1035 -
1036 -0xA6 02 00 00 32  ==>  AT+SETCNT=2,50
1037 -
1038 -
1039 -= 3. Configure DS03A-NB =
1040 -
1041 1041  == 3.1 Configure Methods ==
1042 1042  
1043 1043  
1044 -DS03A-NB supports below configure method:
902 +SW3L-NB supports below configure method:
1045 1045  
1046 1046  * AT Command via Bluetooth Connection (**Recommended**): [[BLE Configure Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
1047 1047  
... ... @@ -1130,7 +1130,7 @@
1130 1130  = 4. Battery & Power Consumption =
1131 1131  
1132 1132  
1133 -DS03A-NB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
991 +SW3L-NB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
1134 1134  
1135 1135  [[**Battery Info & Power Consumption Analyze**>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
1136 1136  
... ... @@ -1144,7 +1144,7 @@
1144 1144  
1145 1145  * Fix bugs.
1146 1146  
1147 -Firmware and changelog can be downloaded from : **[[Firmware download link>>https://www.dropbox.com/sh/zbsm9p4coksqwd5/AADy2ZJc39KsvfbhTMCUGmz1a?dl=0]]**
1005 +Firmware and changelog can be downloaded from : **[[Firmware download link>>https://www.dropbox.com/sh/l0bszumyrmil3yv/AAAg8LYGeAgDsD_ycCnweD72a?dl=0]]**
1148 1148  
1149 1149  Methods to Update Firmware:
1150 1150  
... ... @@ -1165,7 +1165,7 @@
1165 1165  = 7. Order Info =
1166 1166  
1167 1167  
1168 -Part Number: (% style="color:blue" %)**DS03A-NB-XX**
1026 +Part Number: (% style="color:blue" %)**SW3L-NB-XX-YY**
1169 1169  
1170 1170  (% style="color:red" %)**XX**(%%):
1171 1171  
... ... @@ -1175,13 +1175,43 @@
1175 1175  
1176 1176  (% style="color:#037691" %)**1NCE SIM Card NB-IoT network coverage**(%%): Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Finland, Germany, Great Britain, Greece, Hungary, Ireland, Italy, Latvia, Malta, Netherlands, Norway, Puerto Rico, Russia, Slovak , Republic, Slovenia, Spain, Sweden, Switzerland, Taiwan, USA, US Virgin Islands
1177 1177  
1036 +(((
1037 +(% style="color:blue" %)**YY**(%%): Flow Sensor Model:
1038 +)))
1178 1178  
1040 +(((
1041 + **004:** DW-004 Flow Sensor: diameter: G1/2” / DN15.  450 pulse = 1 L
1042 +)))
1043 +
1044 +(((
1045 + **006:** DW-006 Flow Sensor: diameter: G3/4” / DN20. 390 pulse = 1 L
1046 +)))
1047 +
1048 +(((
1049 + **010:** DW-010 Flow Sensor: diameter: G 1” / DN25. 64 pulse = 1 L
1050 +)))
1051 +
1052 +* (((
1053 +calculate flag=0: for SW3L-004 Flow Sensor: 450 pulse = 1 L
1054 +)))
1055 +
1056 +* (((
1057 +calculate flag=1: for SW3L-006 Flow Sensor: 390 pulse = 1 L
1058 +)))
1059 +
1060 +* (((
1061 +calculate flag=2: for SW3L-010 Flow Sensor: 64  pulse = 1 L
1062 +
1063 +
1064 +
1065 +)))
1066 +
1179 1179  = 8. ​Packing Info =
1180 1180  
1181 1181  
1182 1182  (% style="color:#037691" %)**Package Includes**:
1183 1183  
1184 -* DS03A-NB NB-IoT Door sensor x 1
1072 +* SW3L-NB NB-IoT Distance Detection sensor x 1
1185 1185  
1186 1186  * External antenna x 1
1187 1187  
image-20231102094508-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.ting
Size
... ... @@ -1,1 +1,0 @@
1 -26.6 KB
Content
image-20231102100109-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.ting
Size
... ... @@ -1,1 +1,0 @@
1 -33.1 KB
Content
image-20231113180055-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.ting
Size
... ... @@ -1,1 +1,0 @@
1 -85.2 KB
Content
image-20231113180254-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.ting
Size
... ... @@ -1,1 +1,0 @@
1 -71.5 KB
Content
image-20231114091229-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.ting
Size
... ... @@ -1,1 +1,0 @@
1 -32.8 KB
Content
image-20231114091247-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.ting
Size
... ... @@ -1,1 +1,0 @@
1 -26.0 KB
Content
image-20231114094432-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.ting
Size
... ... @@ -1,1 +1,0 @@
1 -73.6 KB
Content
image-20231114094816-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.ting
Size
... ... @@ -1,1 +1,0 @@
1 -78.0 KB
Content
image-20231114094838-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.ting
Size
... ... @@ -1,1 +1,0 @@
1 -78.0 KB
Content
image-20231114165017-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.ting
Size
... ... @@ -1,1 +1,0 @@
1 -64.0 KB
Content
image-20231114165035-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.ting
Size
... ... @@ -1,1 +1,0 @@
1 -50.7 KB
Content