Skip to Content

Changes for page wiki_test

Last modified by Mengting Qiu on 2024/09/05 17:35
From version 107.10
edited by Xiaoling
on 2023/10/11 11:36
Change comment: There is no comment for this version
To version 107.7
edited by Xiaoling
on 2023/10/11 11:08
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -22,19 +22,19 @@
22 22  
23 23  The DS03A-NB will send periodically data every 2 hours as well as for each door open/close action. It also counts the door open times and calculates the last door open duration. Users can also disable the uplink for each open/close event, instead, DS03A-NB can count each open event and uplink periodically.
24 24  
25 -DS03A-NB supports (% style="color:blue" %)**Datalog Feature,** (%%)it can save the data when there is no NB-IoT network and uplink when network recover.
25 +DS03A-LB supports (% style="color:blue" %)**Datalog Feature,** (%%)it can save the data when there is no NB-IoT network and uplink when network recover.
26 26  
27 -DS03A-NB has the (% style="color:blue" %)**Open Alarm Feature**,(%%) user can set this feature so the device will send an alarm if the door has been open for a certain time.
27 +DS03A-LB has the (% style="color:blue" %)**Open Alarm Feature**,(%%) user can set this feature so the device will send an alarm if the door has been open for a certain time.
28 28  
29 -DS03A-NB is designed for outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures
29 +DS03A-LB is designed for outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures
30 30  
31 -DS03A-NB supports different uplink methods including (% style="color:blue" %)**MQTT, MQTTs, UDP & TCP**(%%) for different application requirement, and support uplinks to various IoT Servers.
31 +SW3L-NB supports different uplink methods including (% style="color:blue" %)**MQTT, MQTTs, UDP & TCP**(%%) for different application requirement, and support uplinks to various IoT Servers.
32 32  
33 -DS03A-NB (% style="color:blue" %)**supports BLE configure **(%%)and(% style="color:blue" %)** OTA update**(%%) which make user easy to use.
33 +SW3L-NB (% style="color:blue" %)**supports BLE configure **(%%)and(% style="color:blue" %)** OTA update**(%%) which make user easy to use.
34 34  
35 -DS03A-NB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long-term use up to several years.
35 +SW3L-NB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long-term use up to several years.
36 36  
37 -DS03A-NB has optional built-in SIM card and default IoT server connection version. Which makes it works with simple configuration.
37 +SW3L-NB has optional built-in SIM card and default IoT server connection version. Which makes it works with simple configuration.
38 38  
39 39  [[image:image-20231011093807-6.png||height="278" width="879"]]
40 40  
... ... @@ -141,7 +141,7 @@
141 141  == 1.7 BLE connection ==
142 142  
143 143  
144 -DS03A-NB support BLE remote configure and firmware update.
144 +SW3L-NB support BLE remote configure and firmware update.
145 145  
146 146  
147 147  BLE can be used to configure the parameter of sensor or see the console output from sensor. BLE will be only activate on below case:
... ... @@ -211,18 +211,18 @@
211 211  == 2.1 Send data to IoT server via NB-IoT network ==
212 212  
213 213  
214 -The DS03A-NB is equipped with a NB-IoT module, the pre-loaded firmware in DS03A-NB will get environment data from sensors and send the value to local NB-IoT network via the NB-IoT module.  The NB-IoT network will forward this value to IoT server via the protocol defined by DS03A-NB.
214 +The SW3L-NB is equipped with a NB-IoT module, the pre-loaded firmware in SW3L-NB will get environment data from sensors and send the value to local NB-IoT network via the NB-IoT module.  The NB-IoT network will forward this value to IoT server via the protocol defined by SW3L-NB.
215 215  
216 216  
217 217  Below shows the network structure:
218 218  
219 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/DS03A-NB_NB-IoT_Door_Sensor_User_Manual/WebHome/image-20231011093807-6.png?width=879&height=278&rev=1.1||alt="image-20231011093807-6.png"]]
219 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L-NB_NB-IoT_Flow_Sensor_User_Manual/WebHome/image-20231010091546-2.png?width=909&height=348&rev=1.1||alt="image-20231010091546-2.png"]]
220 220  
221 221  
222 -There are two version: (% style="color:blue" %)**-GE**(%%) and (% style="color:blue" %)**-1D**(%%) version of DS03A-NB.
222 +There are two version: (% style="color:blue" %)**-GE**(%%) and (% style="color:blue" %)**-1D**(%%) version of SW3L-NB.
223 223  
224 224  
225 -(% style="color:blue" %)**GE Version**(%%): This version doesn't include SIM card or point to any IoT server. User needs to use AT Commands to configure below two steps to set DS03A-NB send data to IoT server.
225 +(% style="color:blue" %)**GE Version**(%%): This version doesn't include SIM card or point to any IoT server. User needs to use AT Commands to configure below two steps to set SW3L-NB send data to IoT server.
226 226  
227 227  * Install NB-IoT SIM card and configure APN. See instruction of [[Attach Network>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H2.AttachNetwork]].
228 228  
... ... @@ -252,13 +252,13 @@
252 252  [[image:image-20230819113244-11.png||height="141" width="367"]]
253 253  )))|(% style="width:170px" %)
254 254  
255 -(% style="color:blue" %)**1D Version**(%%): This version has 1NCE SIM card pre-installed and configure to send value to DataCake. User Just need to select the sensor type in DataCake and Activate DS03A-NB and user will be able to see data in DataCake. See here for [[DataCake Config Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.4Datacake]].
255 +(% style="color:blue" %)**1D Version**(%%): This version has 1NCE SIM card pre-installed and configure to send value to DataCake. User Just need to select the sensor type in DataCake and Activate SW3L-NB and user will be able to see data in DataCake. See here for [[DataCake Config Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.4Datacake]].
256 256  
257 257  
258 258  == 2.2 ​Payload Types ==
259 259  
260 260  
261 -To meet different server requirement, DS03A-NB supports different payload type.
261 +To meet different server requirement, SW3L-NB supports different payload type.
262 262  
263 263  **Includes:**
264 264  
... ... @@ -284,7 +284,7 @@
284 284  
285 285  This is the General Json Format. As below:
286 286  
287 -(% style="color:#4472c4" %)**{"IMEI":"866207058378443","Model":"DS03A-NB","flow":217,"battery":3.54,"signal":24,"1":{221,2023/09/20 09:47:01},"2":{0,2023/09/20 09:15:04},"3":{0,2023/09/20 09:00:04},"4":{0,2023/09/20 08:45:03},"5":{0,2023/09/20 08:30:03},"6":{0,2023/09/20 08:15:03},"7":{0,2023/09/20 08:00:04},"8":{0,2023/09/20 07:45:04}}**
287 +(% style="color:#4472c4" %)**{"IMEI":"866207058378443","Model":"SW3L-NB","flow":217,"battery":3.54,"signal":24,"1":{221,2023/09/20 09:47:01},"2":{0,2023/09/20 09:15:04},"3":{0,2023/09/20 09:00:04},"4":{0,2023/09/20 08:45:03},"5":{0,2023/09/20 08:30:03},"6":{0,2023/09/20 08:15:03},"7":{0,2023/09/20 08:00:04},"8":{0,2023/09/20 07:45:04}}**
288 288  
289 289  
290 290  [[image:image-20230920175015-3.png||height="613" width="890"]]
... ... @@ -315,7 +315,7 @@
315 315  
316 316  These bytes include the hardware and software version.
317 317  
318 -(% style="color:#037691" %)**Higher byte:**(%%) Specify Sensor Model: 0x12 for DS03A-NB
318 +(% style="color:#037691" %)**Higher byte:**(%%) Specify Sensor Model: 0x11 for SW3L-NB
319 319  
320 320  (% style="color:#037691" %)**Lower byte:**(%%) Specify the software version: 0x64=100, means firmware version 1.0.0
321 321  
... ... @@ -354,7 +354,7 @@
354 354  
355 355  Type3 payload special design for ThingsBoard, it will also configure other default server to ThingsBoard.
356 356  
357 -(% style="color:#4472c4" %)** {"IMEI": "866207058378443","Model": "DS03A","flow": 502,"battery": 3.57,"signal": 23}**
357 +(% style="color:#4472c4" %)** {"IMEI": "866207058378443","Model": "SW3L","flow": 502,"battery": 3.57,"signal": 23}**
358 358  
359 359  [[image:image-20230922094043-2.png||height="558" width="851"]]
360 360  
... ... @@ -376,328 +376,326 @@
376 376  
377 377  == 2.3  ​Uplink Payload ==
378 378  
379 -=== 2.3.2  Sensor Configuration, FPORT~=4 ===
379 +=== 2.3.1 Sensor Configuration, FPORT~=4 ===
380 380  
381 381  
382 -DS03A-NB will only send this command after getting the downlink command **(0x26 02)** from the server.
382 +SW3L-NB will only send this command after getting the downlink command **(0x26 02)** from the server.
383 383  
384 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
385 -|(% colspan="8" style="background-color:#d9e2f3; color:#0070c0; width:515px" %)**Sensor Configuration FPORT=4**
386 -|**Size(bytes)**|(% style="width:75px" %)**3**|(% style="width:50px" %)**1**|(% style="width:100px" %)**1**|(% style="width:90px" %)**2**|(% style="width:100px" %)**1**|(% style="width:100px" %)**2**|(% style="width:98px" %)**1**
387 -|**Value**|(% style="width:75px" %)TDC (unit:sec)|(% style="width:77px" %)Disalarm|(% style="width:96px" %)(((
388 -Keep status1
389 -)))|(% style="width:99px" %)(((
390 -Keep time1(unit: sec)
391 -)))|(% style="width:87px" %)Keep status2|(% style="width:97px" %)(((
392 -Keep time2(unit: sec)
393 -)))|(% style="width:98px" %)(((
394 -Alarm interval(unit: min)
395 -)))
384 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
385 +|(% style="background-color:#4f81bd; color:white; width:70px" %) **Size(bytes)**|(% style="background-color:#4f81bd; color:white; width:105px" %)**3**|(% style="background-color:#4f81bd; color:white; width:60px" %)**1**|(% style="background-color:#4f81bd; color:white; width:96px" %)**1**|(% style="background-color:#4f81bd; color:white; width:105px" %)**2**|(% style="background-color:#4f81bd; color:white; width:74px" %)**1**
386 +|**Value**|(% style="width:104px" %)TDC(unit:sec)|(% style="width:43px" %)N/A|(% style="width:91px" %)Stop Timer|(% style="width:100px" %)Alarm Timer|(% style="width:69px" %)Reserve
396 396  
397 397  Example parse in TTNv3
398 398  
399 -[[image:image-20230630155527-3.png||height="146" width="902"]]
390 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L-LB_LoRaWAN_Flow_Sensor_User_Manual/WebHome/image-20230614172555-4.png?width=853&height=151&rev=1.1||alt="image-20230614172555-4.png"]]
400 400  
401 401  
402 -* (((
403 -(% style="color:blue" %)**TDC: (default: 0x001C20)**
404 -)))
393 +* (% style="color:blue" %)**TDC: (default: 0x0004B0)**
405 405  
406 -Uplink interval for the Open/Close Event, default value is 0x001C20 which is 7200 seconds = 2 hours.
395 +Uplink interval for the total pulse count, default value is 0x0004B0 which is 1200 seconds = 20 minutes.
407 407  
408 408  
409 -* (((
410 -(% style="color:blue" %)**Disalarm: (default: 0)**
411 -)))
398 +* (% style="color:blue" %)**STOP Duration & Alarm Timer**
412 412  
413 - **If Disalarm = 1**, DS03A-NB will only send uplink at every TDC periodically. This is normally use for pulse meter application, in this application, there are many open/close event, and platform only care about the total number of pulse.
400 +Shows the configure value of [[Alarm for continuously water flow>>||anchor="H2.7Alarmforcontinuouslywaterflow"]]
414 414  
415 - **If Disalarm = 0**, DS03A-NB will send uplink at every TDC periodically and send data on each open/close event. This is useful for the application user need to monitor the open/close event in real-time.
416 416  
403 +=== 2.3.2 Water Flow Value, Uplink FPORT~=2 ===
417 417  
418 -(% style="color:red" %)** Note: When Disalarm=0, a high frequently open/close event will cause lots of uplink and drain battery very fast. **
419 419  
406 +(((
407 +SW3L-NB will send this uplink **after** Device Status once join the NB-IoT network successfully. And SW3L-NB will:
408 +)))
420 420  
421 -* (((
422 -(% style="color:blue" %)**Keep Status1 & Keep Time1 & Keep Status2 & Keep Time2**
410 +(((
411 +periodically send this uplink every 20 minutes, this interval [[can be changed>>||anchor="H2.10SetTransmitIntervalTime"]].
423 423  )))
424 424  
425 -Shows the configure value of [[Alarm Base on Timeout Feature>>||anchor="H3.3.3A0AlarmBaseonTimeout"]]
426 -
427 -
428 -
429 -* (((
430 -(% style="color:blue" %)**Alarm interval(default: 0)**
414 +(((
415 +Uplink Payload totals 11 bytes.
431 431  )))
432 432  
433 -When the state of the door sensor has not been changed after the timeout alarm, the device will send a uplink every alarm interval. It will stop the alarm until the state of the door sensor is changed after the timeout alarm.
418 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
419 +|=(% colspan="6" style="width: 515px; background-color:#4F81BD;color:white" %)**Water Flow Value,  FPORT=2**
420 +|(% style="width:50px" %)**Size(bytes)**|(% style="width:110px" %)**1**|(% style="width:120px" %)**4**|(% style="width:110px" %)**1**|(% style="width:55px" %)**1**|(% style="width:70px" %)**4**
421 +|(% style="width:110px" %)**Value**|(% style="width:81px" %)Calculate Flag & [[Alarm>>||anchor="H2.7Alarmforcontinuouslywaterflow"]]|(% style="width:95px" %)(((
422 +Total pulse Or Last Pulse
423 +)))|(% style="width:78px" %)(((
424 +MOD & PA4_status & PB15_status
425 +)))|(% style="width:92px" %)Reserve(0x01)|(% style="width:134px" %)Unix TimeStamp
434 434  
427 +**Calculate Flag & Alarm:**
435 435  
436 -=== 2.3.3  Real-Time Open/Close Status, Uplink FPORT~=2 ===
429 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)
430 +|(% style="background-color:#4f81bd; color:white; width:70px" %)**Size(bit)**|(% style="background-color:#4f81bd; color:white; width:70px" %)**[bit7:bit6]**|(% style="background-color:#4f81bd; color:white; width:90px" %)**[bit5:bit2]**|(% style="background-color:#4f81bd; color:white; width:140px" %)**bit1**|(% style="background-color:#4f81bd; color:white; width:130px" %)**bit0**
431 +|(% style="width:88px" %)**Value**|(% style="width:117px" %)Reserve|(% style="width:117px" %)Calculate Flag|(% style="width:169px" %)Alarm: 0: No Alarm; 1: Alarm|(% style="width:150px" %)TDC flag 0:No;1:Yes
437 437  
433 +**MOD & PA4_status & PB15_status:**
438 438  
439 -DS03A-NB will send this uplink **after** Device Status once join the LoRaWAN network successfully. And DS03A-NB will send uplinks when:
435 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:230px" %)
436 +|(% style="background-color:#4f81bd; color:white; width:50px" %)**Size(bit)**|(% style="background-color:#4f81bd; color:white; width:60px" %)**bit7**|(% style="background-color:#4f81bd; color:white; width:60px" %)**bit6**|(% style="background-color:#4f81bd; color:white; width:60px" %)**[bit5:bit0]**
437 +|(% style="width:88px" %)**Value**|(% style="width:117px" %)PA4_status|(% style="width:117px" %)PB15_status|(% style="width:118px" %)MOD
440 440  
441 -* Every 2 hours, this interval [[can be changed>>||anchor="H3.3.1A0SetTransmitIntervalTime"]].
442 -* There is an Open/Close event.  (This info can be disabled by AT+DISALARM=1)
439 +(% style="color:#037691" %)** **[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L-LB_LoRaWAN_Flow_Sensor_User_Manual/WebHome/image-20230626093242-1.png?width=892&height=276&rev=1.1||alt="image-20230626093242-1.png"]]
443 443  
444 -**1) When (% style="color:blue" %)AT+TTRCHANNEL=1(%%), Uplink Payload totals (% style="color:blue" %)11 bytes. (Default mode)(%%)**
445 445  
446 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
447 -|=(% colspan="5" style="background-color:#D9E2F3;color:#0070C0;width:515px" %)**Real-Time Open/Close Status, FPORT=2**
448 -|(% style="width:94px" %)**Size(bytes)**|(% style="width:97px" %)**1**|(% style="width:95px" %)**3**|(% style="width:119px" %)**3**|(% style="width:107px" %)**4**
449 -|(% style="width:95px" %)**Value**|(% style="width:97px" %)(((
450 -Status & [[Alarm>>||anchor="H3.3.4A0TTRIG126TTRIG2timeoutstatusalarm"]]
451 -)))|(% style="width:95px" %)Total open door events|(% style="width:119px" %)(((
452 -The last door open duration (unit: sec)
453 -)))|(% style="width:108px" %)[[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]
442 +* (((
443 +(% style="color:blue" %)**Calculate Flag**
444 +)))
454 454  
455 -**Status & Alarm:**
446 +(((
447 +The calculate flag is a user defined field, IoT server can use this flag to handle different meters with different pulse factors. For example, if there are 100 Flow Sensors, meters 1 ~~50 are 1 liter/pulse and meters 51 ~~ 100 has 1.5 liter/pulse.
448 +)))
456 456  
457 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
458 -|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:60px" %)**[bit7:bit4]**|(% style="background-color:#d9e2f3; color:#0070c0; width:80px" %)**bit3**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**bit2**|(% style="background-color:#d9e2f3; color:#0070c0; width:120px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:105px" %)**bit0**
459 -|(% style="width:76px" %)**Value**|(% style="width:96px" %)Reserve|(% style="width:110px" %)(((
460 -Count mod
461 -)))|(% style="width:106px" %)TDC flag 0:No;1:Yes|(% style="width:148px" %)(((
462 -Alarm 0: No Alarm; 1: Alarm
463 -)))|(% style="width:131px" %)(((
464 -Status 0: Close; 1: Open
450 +(((
451 +**Example: in the default payload:**
465 465  )))
466 466  
467 -[[image:image-20230630155451-2.png||height="246" width="928"]]
468 -
469 -
470 470  * (((
471 -(% style="color:blue" %)**Count mod:Default=0**
455 +calculate flag=0: for SW3L-004 Flow Sensor: 450 pulse = 1 L
472 472  )))
473 -
474 -0: Uplink total open door times since factory
475 -
476 -1: Uplink total open door times since last FPORT=2 uplink.
477 -
478 -
479 -* (% style="color:blue" %)**TDC flag**
480 -
481 -When the flag is 1, it means sending packets at normal time intervals.
482 -
483 -Otherwise, it is a packet sent at non-TDC time.
484 -
485 -
486 486  * (((
487 -(% style="color:#0000ff" %)**Alarm**
458 +calculate flag=1: for SW3L-006 Flow Sensor: 390 pulse = 1 L
488 488  )))
489 -
490 -See [[Alarm Base on Timeout>>||anchor="H3.3.3A0AlarmBaseonTimeout"]]
491 -
492 -
493 493  * (((
494 -(% style="color:blue" %)**Status**
461 +calculate flag=2: for SW3L-010 Flow Sensor: 64 pulse = 1 L
495 495  )))
496 496  
497 -This bit is 1 when the door sensor is open and 0 when it is close.
498 -
499 -
500 -* (((
501 -(% style="color:blue" %)**Total open door events**
464 +(((
465 +Default value: 0. 
502 502  )))
503 503  
504 -Total pulse/counting base on open door.
468 +(((
469 +Range (4 bits): (b)0000 ~~ (b) 1111
505 505  
506 -Range (3 Bytes) : 0x000000 ~~ 0xFFFFFF . Max: 16777215
471 +If user use with a meter for example is 0.02L/pulse. To proper decode the correct value in server,
507 507  
473 +1) User can set the Calculate Flag of this sensor to 3.
508 508  
509 -* (((
510 -(% style="color:blue" %)**The last door open duration**
475 +2) In server side, when a sensor data arrive, the decoder will check the value of Calculate Flag, It the value is 3, the total volume = 0.02 x Pulse Count.
511 511  )))
512 512  
513 -Door sensor last open duration.
478 +(((
479 +(% style="color:red" %)**NOTE: User need to set Calculate Flag to proper value before use Flow Sensor. Downlink or AT Command see: **(%%)Refer: [[Set Calculate Flag>>||anchor="H2.8Setthecalculateflag"]]
514 514  
515 -Unit: sec.
481 +(((
482 +
483 +)))
484 +)))
516 516  
517 -[[image:image-20230701094042-1.png||height="154" width="763"]]
518 518  
487 +* (((
488 +(% style="color:blue" %)**Alarm**
489 +)))
519 519  
520 -**2) When (% style="color:blue" %)AT+TTRCHANNEL=2(%%), Uplink Payload totals (% style="color:blue" %)18 bytes(%%)**(% style="color:blue" %).
491 +(((
492 +See [[Alarm for continuously water flow>>||anchor="H2.7Alarmforcontinuouslywaterflow"]]
493 +)))
521 521  
522 -(When the maximum DR of some frequencies is 11 bytes, it will cause the server to receive empty packets)
495 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L%20LoRaWAN%20Outdoor%20Flow%20Sensor/WebHome/image-20220519095946-4.png?width=724&height=65&rev=1.1||alt="image-20220519095946-4.png"]]
523 523  
524 -(% style="color:red" %)**Note:When using the AT+TTRCHANNEL=2 command, the Datalog function cannot be used.**
525 525  
526 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
527 -|=(% colspan="8" style="background-color:#D9E2F3;color:#0070C0; width: 515px;" %)**Real-Time Open/Close Status, FPORT=2**
528 -|(% style="width:50px" %)**Size(bytes)**|(% style="width:97px" %)**1**|(% style="width:95px" %)**3**|(% style="width:125px" %)**3**|(% style="width:100px" %)**4**|(% style="width:86px" %)**1**|(% style="width:96px" %)**3**|(% style="width:126px" %)**3**
529 -|(% style="width:95px" %)**Value**|(% style="width:97px" %)(((
530 -Status1 & Alarm1
531 -)))|(% style="width:95px" %)Total open door events1|(% style="width:125px" %)(((
532 -The last door open duration1 (unit: sec)
533 -)))|(% style="width:100px" %)[[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]|(% style="width:86px" %)(((
534 -Status2 & Alarm2
535 -)))|(% style="width:96px" %)Total open door events2|(% style="width:126px" %)The last door open duration2 (unit: sec)
498 +(((
499 +* (% style="color:blue" %)**TDC flag**
536 536  
537 -**Status1 & Alarm1:**
501 +When the flag is 1, it means sending packets at normal time intervals.
538 538  
539 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:514px" %)
540 -|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:60px" %)**[bit7:bit4]**|(% style="background-color:#d9e2f3; color:#0070c0; width:70px" %)**bit3**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**bit2**|(% style="background-color:#d9e2f3; color:#0070c0; width:117px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:117px" %)**bit0**
541 -|(% style="width:76px" %)**Value**|(% style="width:96px" %)Reserve|(% style="width:99px" %)(((
542 -Count mod
543 -)))|(% style="width:103px" %)TDC flag 0:No;1:Yes|(% style="width:216px" %)(((
544 -Alarm1 0: No Alarm; 1: Alarm (PA8 of pin)
545 -)))|(% style="width:181px" %)(((
546 -Status1 0: Close; 1: Open (PA8 of pin)
503 +Otherwise, it is a packet sent at non-TDC time.
547 547  )))
548 548  
549 -**Status2 & Alarm2:**
506 +* (((
507 +(% style="color:blue" %)**Total pulse**
508 +)))
550 550  
551 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
552 -|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:60px" %)**[bit7:bit2]**|(% style="background-color:#d9e2f3; color:#0070c0; width:200px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:200px" %)**bit0**
553 -|(% style="width:76px" %)**Value**|(% style="width:113px" %)Reserve|(% style="width:219px" %)(((
554 -Alarm2 0: No Alarm; 1: Alarm (PA4 of pin)
555 -)))|(% style="width:181px" %)(((
556 -Status2 0: Close; 1: Open (PA4 of pin)
510 +(((
511 +Total pulse/counting since factory
557 557  )))
558 558  
559 -[[image:image-20230630155908-6.png||height="295" width="927"]]
514 +(((
515 +Range (4 Bytes) : 0x00000000~~ 0xFFFFFFFF .
560 560  
517 +
518 +)))
561 561  
562 562  * (((
563 -(% style="color:blue" %)**Count mod:Default=0**
521 +(% style="color:blue" %)**Last Pulse**
564 564  )))
565 565  
566 -0: Uplink total open door times since factory
524 +(((
525 +Total pulse since last FPORT=2 uplink. (Default 20 minutes)
526 +)))
567 567  
568 -1: Uplink total open door times since last FPORT=2 uplink.
528 +(((
529 +Range (4 Bytes) : 0x00000000~~ 0xFFFFFFFF .
569 569  
570 570  
571 -* (% style="color:blue" %)**TDC flag**
532 +* (((
533 +(% style="color:blue" %)**PA4_status: Support digital level input below 3.3V**
534 +)))
572 572  
573 -When the flag is 1, it means sending packets at normal time intervals.
536 +(((
537 +0 ~-~-> PA4 is at low level.
538 +)))
574 574  
575 -Otherwise, it is a packet sent at non-TDC time.
540 +(((
541 +1 ~-~-> PA4 is at high level.
576 576  
577 577  
578 578  * (((
579 -(% style="color:#0000ff" %)**Alarm1 or Alarm2**
545 +(% style="color:blue" %)**PB15_status: Support digital level input below 3.3V**
580 580  )))
581 581  
582 -See [[Alarm Base on Timeout>>||anchor="H3.3.3A0AlarmBaseonTimeout"]]
548 +(((
549 +0 ~-~-> PB15 is at low level.
550 +)))
583 583  
552 +(((
553 +1 ~-~-> PB15 is at high level..
554 +)))
555 +)))
556 +)))
584 584  
585 585  * (((
586 -(% style="color:blue" %)**Status1 **(% style="color:#0000ff" %)**or **(% style="color:blue" %)**Status2**
559 +(% style="color:blue" %)**MOD: Default =0**
587 587  )))
588 588  
589 -This bit is 1 when the door sensor is open and 0 when it is close.
562 +(((
563 +MOD=0 ~-~-> Uplink Total Pulse since factory
564 +)))
590 590  
566 +(((
567 +MOD=1 ~-~-> Uplink total pulse since last FPORT=2 uplink.
591 591  
569 +
570 +)))
571 +
592 592  * (((
593 -(% style="color:blue" %)**Total open door events1 **(% style="color:#0000ff" %)**or**(% style="color:blue" %)** Total open door events2**
573 +(% style="color:blue" %)**Water Flow Value**
594 594  )))
595 595  
596 -Total pulse/counting base on open door.
576 +(((
577 +**Total Water Flow Volume = (Calculate Flag) x (Total Pulse)=9597/450=21.3L**
578 +)))
597 597  
598 -Range (3 Bytes) : 0x000000 ~~ 0xFFFFFF . Max: 16777215
580 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L%20LoRaWAN%20Outdoor%20Flow%20Sensor/WebHome/image-20220519095946-5.png?width=727&height=50&rev=1.1||alt="image-20220519095946-5.png"]]
599 599  
600 600  
601 -* (((
602 -(% style="color:blue" %)**The last door open duration1 **(% style="color:#0000ff" %)**or**(% style="color:blue" %)** The last door open duration2**
583 +(((
584 +**Total Water Flow for TDC timer = (Calculate Flag) x (Last Pulse)=79/450=0.2L**
603 603  )))
604 604  
605 -Door sensor last open duration.
587 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L%20LoRaWAN%20Outdoor%20Flow%20Sensor/WebHome/image-20220519095946-6.png?width=733&height=43&rev=1.1||alt="image-20220519095946-6.png"]] ** **
606 606  
607 -Unit: sec.
608 608  
609 -[[image:image-20230701094042-1.png||height="154" width="763"]]
590 +=== 2.3.3 Historical Water Flow Status, FPORT~=3 ===
610 610  
611 611  
612 -=== 2.3.4  Historical Door Open/Close Event, FPORT~=3 ===
593 +(((
594 +SW3L-NB stores sensor values and users can retrieve these history values via the downlink command.
595 +)))
613 613  
597 +(((
598 +The historical payload includes one or multiplies entries and every entry has the same payload as Real-Time water flow status.
614 614  
615 -DS03A-NB stores sensor values and users can retrieve these history values via the [[downlink command>>||anchor="H2.5DatalogFeature"]].
600 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
601 +|=(% colspan="6" style="width: 515px; background-color:#4F81BD;color:white" %)**Water Flow Value,  FPORT=3**
602 +|(% style="width:50px" %)**Size(bytes)**|(% style="width:110px" %)**1**|(% style="width:120px" %)**4**|(% style="width:110px" %)**1**|(% style="width:55px" %)**1**|(% style="width:70px" %)**4**
603 +|(% style="width:110px" %)**Value**|(% style="width:81px" %)Calculate Flag & [[Alarm>>||anchor="H2.7Alarmforcontinuouslywaterflow"]]|(% style="width:95px" %)(((
604 +Total pulse Or Last Pulse
605 +)))|(% style="width:78px" %)(((
606 +MOD & PA4_status & PB15_status
607 +)))|(% style="width:92px" %)Reserve(0x01)|(% style="width:134px" %)Unix TimeStamp
616 616  
617 -The historical payload includes one or multiplies entries and every entry has the same payload as Real-Time open/close status.
609 +**Calculate Flag & Alarm:**
618 618  
619 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
620 -|=(% colspan="5" style="background-color:#D9E2F3;color:#0070C0;width:515px" %)**Real-Time Open/Close Status, FPORT=3**
621 -|(% style="width:60px" %)**Size(bytes)**|(% style="width:80px" %)**1**|(% style="width:120px" %)**3**|(% style="width:150px" %)**3**|(% style="width:90px" %)**4**
622 -|(% style="width:95px" %)**Value**|(% style="width:97px" %)(((
623 -Status & [[Alarm>>||anchor="H3.3.3A0AlarmBaseonTimeout"]]
624 -)))|(% style="width:95px" %)Total open door events|(% style="width:119px" %)(((
625 -The last door open duration (unit: sec)
626 -)))|(% style="width:108px" %)[[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]
611 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
612 +|(% style="background-color:#4f81bd; color:white; width:50px" %)**Size(bit)**|(% style="background-color:#4f81bd; color:white; width:89px" %)**bit7**|(% style="background-color:#4f81bd; color:white; width:89px" %)**bit6**|(% style="background-color:#4f81bd; color:white; width:69px" %)**[bit5:bit2]**|(% style="background-color:#4f81bd; color:white; width:129px" %)**bit1**|(% style="background-color:#4f81bd; color:white; width:89px" %)**bit0**
613 +|(% style="width:88px" %)**Value**|(% style="width:96px" %)(((
614 +No ACK message
615 +)))|(% style="width:94px" %)Poll Message Flag|(% style="width:115px" %)Calculate Flag|(% style="width:136px" %)Alarm: 0: No Alarm; 1: Alarm|(% style="width:120px" %)TDC flag 0:No;1:Yes
627 627  
628 -**Status & Alarm:**
617 +**MOD & PA4_status & PB15_status:**
629 629  
630 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
631 -|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:75px" %)**bit7**|(% style="background-color:#d9e2f3; color:#0070c0; width:65px" %)**bit6**|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**[bit5:bit4]**|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**bit3**|(% style="background-color:#d9e2f3; color:#0070c0; width:70px" %)**bit2**|(% style="background-color:#d9e2f3; color:#0070c0; width:80px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:75px" %)**bit0**
632 -|(% style="width:76px" %)**Value**|(% style="width:88px" %)No ACK message|(% style="width:92px" %)Poll Message Flag|(% style="width:89px" %)Reserve|(% style="width:90px" %)(((
633 -Count mod
634 -)))|(% style="width:95px" %)(((
635 -TDC flag 0:No; 1:Yes
636 -)))|(% style="width:116px" %)(((
637 -Alarm 0: No Alarm; 1: Alarm
638 -)))|(% style="width:112px" %)(((
639 -Status 0:Close; 1: Open
619 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:240px" %)
620 +|(% style="background-color:#4f81bd; color:white; width:60px" %)**Size(bit)**|(% style="background-color:#4f81bd; color:white; width:60px" %)**bit7**|(% style="background-color:#4f81bd; color:white; width:60px" %)**bit6**|(% style="background-color:#4f81bd; color:white; width:60px" %)**[bit5:bit0]**
621 +|(% style="width:88px" %)**Value**|(% style="width:117px" %)PA4_status|(% style="width:117px" %)PB15_status|(% style="width:118px" %)MOD
640 640  )))
641 641  
642 642  * (((
643 -Each data entry is 11 bytes and has the same structure as [[Real-Time open/close status>>||anchor="H2.3.3A0Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2"]], to save airtime and battery, DS03A-NB will send max bytes according to the current DR and Frequency bands.
625 +Each data entry is 11 bytes and has the same structure as [[real time water flow status>>||anchor="H2.3.2A0WaterFlowValue2CUplinkFPORT3D2"]], to save airtime and battery, SW3L will send max bytes according to the current DR and Frequency bands.
644 644  )))
645 645  
628 +(((
646 646  For example, in the US915 band, the max payload for different DR is:
630 +)))
647 647  
648 648  (((
649 -**~1. DR0**: max is 11 bytes so one entry of data
633 +(% style="color:blue" %)**a) DR0:**(%%) max is 11 bytes so one entry of data
650 650  )))
651 651  
652 652  (((
653 -**2. DR1**: max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
637 +(% style="color:blue" %)**b) DR1:**(%%) max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
654 654  )))
655 655  
656 656  (((
657 -**3. DR2**: total payload includes 11 entries of data
641 +(% style="color:blue" %)**c) DR2:**(%%) total payload includes 11 entries of data
658 658  )))
659 659  
660 660  (((
661 -**4. DR3**: total payload includes 22 entries of data.
645 +(% style="color:blue" %)**d) DR3:**(%%) total payload includes 22 entries of data.
662 662  )))
663 663  
664 -If DS03A-NB doesn't have any data in the polling time. It will uplink 11 bytes of 0
648 +(((
649 +If SW3L-NB doesn't have any data in the polling time. It will uplink 11 bytes of 0
665 665  
666 -[[image:image-20230630155556-4.png||height="146" width="938"]]
651 +
652 +)))
667 667  
668 -**Downlink:**
654 +(((
655 +(% style="color:#037691" %)**Downlink:**
656 +)))
669 669  
670 -0x31 64 9E 7D 34 64 9E 7E 9C 05
658 +(((
659 +0x31 64 92 C5 AC 64 92 C7 8C 05
660 +)))
671 671  
662 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L-LB_LoRaWAN_Flow_Sensor_User_Manual/WebHome/image-20230626093440-2.png?width=890&height=160&rev=1.1||alt="image-20230626093440-2.png"]]
672 672  
673 -**Uplink:**
674 674  
675 -45 00 00 00 00 00 00 64 9E 7D 48 40 00 00 00 00 00 63 64 9E 7D 9C 41 00 00 01 00 00 63 64 9E 7D A4 40 00 00 01 00 00 8D 64 9E 7E 31 43 00 00 02 00 00 8D 64 9E 7E 44 48 00 00 02 00 00 1F 64 9E 7E 59 4B 00 00 03 00 00 1F 64 9E 7E 6B
665 +(((
666 +(% style="color:#037691" %)**Uplink:**
667 +)))
676 676  
669 +(((
670 +41 00 01 00 00 00 08 64 92 C5 E4 40 00 01 00 00 00 08 64 92 C6 06 49 41 01 00 00 00 00 64 92 C6 8B 49 81 01 00 00 00 00 64 92 C7 34 4A 01 01 00 00 00 2D 64 92 C7 7C
677 677  
678 -**Parsed Value:**
672 +
673 +)))
679 679  
680 -[COUNTMOD, TDC_FLAG, ALARM,  DOOR_STATUS, OPEN_DOOR_TIMES, LAST_DOOR_OPEN_DURATION, TIME]
675 +(((
676 +(% style="color:#037691" %)**Parsed Value:**
677 +)))
681 681  
679 +(((
680 +[TDC_flag, Alarm, Calculate Flag, PA4_status, PB15_status, MOD, Total pulse or Last Pulse,** **Water Flow Value, TIME]
681 +)))
682 682  
683 -[SUM,YES,FALSE,OPEN,0,0,2023-06-30 06:59:20],
684 684  
685 -[SUM,NO,FALSE,CLOSE,0,99,2023-06-30 07:00:44],
684 +(((
685 +[YES,FALSE,0,L,L, 0,8, 0.0,2023-06-21 09:41:56],
686 686  
687 -[SUM,NO,FALSE,OPEN, 1,99,2023-06-30 07:00:52],
687 +[NO,FALSE,0,L,L, 0,8, 0.0,2023-06-21 09:42:30],
688 688  
689 -[SUM,NO,FALSE,CLOSE,1,141,2023-06-30 07:03:13],
689 +[YES,FALSE,2,L,H,1,0, 0.0,2023-06-21 09:44:43],
690 690  
691 -[SUM,NO,TRUE,OPEN, 2,141,2023-06-30 07:03:32],
691 +[YES,FALSE,2,H,L,1,0, 0.0,2023-06-21 09:47:32],
692 692  
693 -[PART,NO,FALSE,CLOSE,2,31,2023-06-30 07:03:53],
693 +[NO,TRUE ,2, L,L,1,45,0.7,2023-06-21 09:48:44],
694 +)))
694 694  
695 -[PART,NO,TRUE,OPEN, 3,31,2023-06-30 07:04:11],
696 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L-LB_LoRaWAN_Flow_Sensor_User_Manual/WebHome/image-20230626093703-3.png?width=894&height=156&rev=1.1||alt="image-20230626093703-3.png"]]
696 696  
697 -[[image:image-20230630172740-1.png||height="199" width="868"]]
698 698  
699 -
700 -
701 701  == 2.4 Test Uplink and Change Update Interval ==
702 702  
703 703  
... ... @@ -713,7 +713,7 @@
713 713  == 2.5 Multi-Samplings and One uplink ==
714 714  
715 715  
716 -To save battery life, DS03A-NB will sample Water Flow data every 15 minutes and send one uplink every 2 hours. So each uplink it will include 8 stored data + 1 real-time data. They are defined by:
714 +To save battery life, SW3L-NB will sample Water Flow data every 15 minutes and send one uplink every 2 hours. So each uplink it will include 8 stored data + 1 real-time data. They are defined by:
717 717  
718 718  * (% style="color:#037691" %)**AT+TR=900**   (%%) ~/~/ The unit is seconds, and the default is to record data once every 900 seconds (15 minutes, the minimum can be set to 180 seconds)
719 719  
... ... @@ -727,7 +727,7 @@
727 727  == 2.6 Trggier an uplink by external interrupt ==
728 728  
729 729  
730 -DS03A-NB has an external trigger interrupt function. Users can use the PB15 pin to trigger the upload of data packets.
728 +SW3L-NB has an external trigger interrupt function. Users can use the PB15 pin to trigger the upload of data packets.
731 731  
732 732  (% style="color:blue" %)**AT command:**
733 733  
... ... @@ -761,7 +761,7 @@
761 761  )))
762 762  
763 763  (((
764 -Default: 15s, If DS03A-NB didn't see any water flow in 15s, DS03A-NB will consider stop of water flow event.
762 +Default: 15s, If SW3L-NB didn't see any water flow in 15s, SW3L-NB will consider stop of water flow event.
765 765  )))
766 766  
767 767  * (((
... ... @@ -769,7 +769,7 @@
769 769  )))
770 770  
771 771  (((
772 -**Example:** 3 minutes, if DS03A-NB detect a start of water flow event and didn't detect a stop event within Alarm timer, DS03A-NB will send an Alarm to indicate a water flow abnormal alarm.
770 +**Example:** 3 minutes, if SW3L-NB detect a start of water flow event and didn't detect a stop event within Alarm timer, SW3L-NB will send an Alarm to indicate a water flow abnormal alarm.
773 773  )))
774 774  
775 775  (((
... ... @@ -896,12 +896,12 @@
896 896  
897 897  )))
898 898  
899 -= 3. Configure DS03A-NB =
897 += 3. Configure SW3L-NB =
900 900  
901 901  == 3.1 Configure Methods ==
902 902  
903 903  
904 -DS03A-NB supports below configure method:
902 +SW3L-NB supports below configure method:
905 905  
906 906  * AT Command via Bluetooth Connection (**Recommended**): [[BLE Configure Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
907 907  
... ... @@ -990,7 +990,7 @@
990 990  = 4. Battery & Power Consumption =
991 991  
992 992  
993 -DS03A-NB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
991 +SW3L-NB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
994 994  
995 995  [[**Battery Info & Power Consumption Analyze**>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
996 996  
... ... @@ -1025,7 +1025,7 @@
1025 1025  = 7. Order Info =
1026 1026  
1027 1027  
1028 -Part Number: (% style="color:blue" %)**DS03A-NB-XX**
1026 +Part Number: (% style="color:blue" %)**SW3L-NB-XX-YY**
1029 1029  
1030 1030  (% style="color:red" %)**XX**(%%):
1031 1031  
... ... @@ -1035,14 +1035,43 @@
1035 1035  
1036 1036  (% style="color:#037691" %)**1NCE SIM Card NB-IoT network coverage**(%%): Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Finland, Germany, Great Britain, Greece, Hungary, Ireland, Italy, Latvia, Malta, Netherlands, Norway, Puerto Rico, Russia, Slovak , Republic, Slovenia, Spain, Sweden, Switzerland, Taiwan, USA, US Virgin Islands
1037 1037  
1036 +(((
1037 +(% style="color:blue" %)**YY**(%%): Flow Sensor Model:
1038 +)))
1038 1038  
1040 +(((
1041 + **004:** DW-004 Flow Sensor: diameter: G1/2” / DN15.  450 pulse = 1 L
1042 +)))
1039 1039  
1044 +(((
1045 + **006:** DW-006 Flow Sensor: diameter: G3/4” / DN20. 390 pulse = 1 L
1046 +)))
1047 +
1048 +(((
1049 + **010:** DW-010 Flow Sensor: diameter: G 1” / DN25. 64 pulse = 1 L
1050 +)))
1051 +
1052 +* (((
1053 +calculate flag=0: for SW3L-004 Flow Sensor: 450 pulse = 1 L
1054 +)))
1055 +
1056 +* (((
1057 +calculate flag=1: for SW3L-006 Flow Sensor: 390 pulse = 1 L
1058 +)))
1059 +
1060 +* (((
1061 +calculate flag=2: for SW3L-010 Flow Sensor: 64  pulse = 1 L
1062 +
1063 +
1064 +
1065 +)))
1066 +
1040 1040  = 8. ​Packing Info =
1041 1041  
1042 1042  
1043 1043  (% style="color:#037691" %)**Package Includes**:
1044 1044  
1045 -* DS03A-NB NB-IoT Door sensor x 1
1072 +* SW3L-NB NB-IoT Distance Detection sensor x 1
1046 1046  
1047 1047  * External antenna x 1
1048 1048