Skip to Content

Changes for page wiki_test

Last modified by Mengting Qiu on 2024/09/05 17:35
From version 101.34
edited by Xiaoling
on 2023/10/10 18:22
Change comment: There is no comment for this version
To version 107.11
edited by Xiaoling
on 2023/10/11 11:50
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -SW3L-NB -- NB-IoT Flow Sensor User Manual
1 +DS03A-NB -- NB-IoT Door Sensor User Manual
Content
... ... @@ -1,13 +1,9 @@
1 1  (% style="text-align:center" %)
2 -[[image:image-20231010090810-1.png||height="518" width="839"]]
2 +[[image:image-20231011093014-5.png]]
3 3  
4 4  
5 5  
6 6  
7 -
8 -
9 -
10 -
11 11  **Table of Contents:**
12 12  
13 13  {{toc/}}
... ... @@ -19,26 +19,30 @@
19 19  
20 20  = 1. Introduction =
21 21  
22 -== 1.1 What is SW3L-NB NB-IoT Flow Sensor ==
18 +== 1.1 What is DS03A-NB NB-IoT Door Sensor ==
23 23  
24 24  
25 -The Dragino SW3L-NB is a (% style="color:blue" %)**NB-IoT Flow Sensor**(%%). It detects water flow volume and uplink to IoT server via NB-IoT network. User can use this to (% style="color:blue" %)**monitor the water usage for buildings**.
21 +The Dragino DS03A-NB is a (% style="color:blue" %) **NB-IoT Door Sensor**(%%) for Internet of Things solution. It (% style="color:blue" %)**detects door open/close status**(%%) and uplinks to IoT server via NB-IoT network. user can see the door status, open duration, open counts in the IoT Server.
26 26  
27 -The SW3L-NB will send water flow volume every 20 minutes. It can also detect the (% style="color:blue" %)**water flow status and send Alarm**(%%), to avoid the waste for water usage such as broken toilet case.
23 +The DS03A-NB will send periodically data every 2 hours as well as for each door open/close action. It also counts the door open times and calculates the last door open duration. Users can also disable the uplink for each open/close event, instead, DS03A-NB can count each open event and uplink periodically.
28 28  
29 -SW3L-NB is designed for both indoor and outdoor use. It has a weatherproof enclosure and industrial level battery to (% style="color:blue" %)**work in low to high temperatures**.
25 +DS03A-NB supports (% style="color:blue" %)**Datalog Feature,** (%%)it can save the data when there is no NB-IoT network and uplink when network recover.
30 30  
31 -SW3L-NB supports different uplink methods including (% style="color:blue" %)**MQTT, MQTTs, UDP & TCP**(%%) for different application requirement, and support uplinks to various IoT Servers.
27 +DS03A-NB has the (% style="color:blue" %)**Open Alarm Feature**,(%%) user can set this feature so the device will send an alarm if the door has been open for a certain time.
32 32  
33 -SW3L-NB (% style="color:blue" %)**supports BLE configure **(%%)and(% style="color:blue" %)** OTA update**(%%) which make user easy to use.
29 +DS03A-NB is designed for outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures
34 34  
35 -SW3L-NB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long-term use up to several years.
31 +DS03A-NB supports different uplink methods including (% style="color:blue" %)**MQTT, MQTTs, UDP & TCP**(%%) for different application requirement, and support uplinks to various IoT Servers.
36 36  
37 -SW3L-NB has optional built-in SIM card and default IoT server connection version. Which makes it works with simple configuration.
33 +DS03A-NB (% style="color:blue" %)**supports BLE configure **(%%)and(% style="color:blue" %)** OTA update**(%%) which make user easy to use.
38 38  
39 -[[image:image-20231010091546-2.png||height="348" width="909"]]
35 +DS03A-NB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long-term use up to several years.
40 40  
37 +DS03A-NB has optional built-in SIM card and default IoT server connection version. Which makes it works with simple configuration.
41 41  
39 +[[image:image-20231011093807-6.png||height="278" width="879"]]
40 +
41 +
42 42  == 1.2 ​Features ==
43 43  
44 44  
... ... @@ -45,7 +45,10 @@
45 45  * NB-IoT Bands: B1/B2/B3/B4/B5/B8/B12/B13/B17/B18/B19/B20/B25/B28/B66/B70/B85 @H-FDD
46 46  * Ultra-low power consumption
47 47  * Upload water flow volume
48 -* Monitor water waste
48 +* Door Open/Close detect
49 +* Door open/close statistics
50 +* Datalog Feature
51 +* Open Alarm Feature
49 49  * Multiply Sampling and one uplink
50 50  * Support Bluetooth v5.1 remote configure and update firmware
51 51  * Uplink on periodically
... ... @@ -101,35 +101,22 @@
101 101  (% class="wikigeneratedid" id="H1.4Ratedenvironmentalconditions" %)
102 102  (% style="display:none" %) (%%)
103 103  
104 -== 1.4 Flow Sensor Spec ==
105 105  
108 +== 1.4 Applications ==
106 106  
107 -(((
108 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
109 -|=(% style="width: 80px;background-color:#4F81BD;color:white" %)**Model**|=(% style="width: 80px;background-color:#4F81BD;color:white" %)**Probe**|=(% style="width: 80px;background-color:#4F81BD;color:white" %)**Diameter**|=(% style="width: 80px;background-color:#4F81BD;color:white" %)**Range**|=(% style="width: 80px;background-color:#4F81BD;color:white" %)**Max Pressure**|=(% style="width: 110px;background-color:#4F81BD;color:white" %)**Measure**
110 -|(% style="width:88px" %)SW3L-004|(% style="width:75px" %)DW-004|(% style="width:107px" %)G1/2" /DN15|(% style="width:101px" %)1~~30L/min|(% style="width:116px" %)≤ 2.0Mpa|(% style="width:124px" %)450 pulse = 1 L
111 -|(% style="width:88px" %)SW3L-006|(% style="width:75px" %)DW-006|(% style="width:107px" %)G3/4" /DN20|(% style="width:101px" %)1~~60L/min|(% style="width:116px" %)≤ 1.2Mpa|(% style="width:124px" %)390 pulse = 1 L
112 -|(% style="width:88px" %)SW3L-010|(% style="width:75px" %)DW-010|(% style="width:107px" %)G 1" /DN25|(% style="width:101px" %)2~~100L/min|(% style="width:116px" %)≤ 2.0Mpa|(% style="width:124px" %)64 pulse = 1 L
113 -)))
114 114  
111 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654741400370-813.png?rev=1.1||alt="1654741400370-813.png"]]
115 115  
116 -== 1.5 Applications ==
117 117  
114 +== 1.5 Sleep mode and working mode ==
118 118  
119 -* Flow Sensor application
120 -* Water Control
121 -* Toilet Flow Sensor
122 -* Monitor Waste water
123 123  
124 -== 1.6 Sleep mode and working mode ==
125 -
126 -
127 127  (% style="color:blue" %)**Deep Sleep Mode: **(%%)Sensor doesn't have any NB-IoT activate. This mode is used for storage and shipping to save battery life.
128 128  
129 129  (% style="color:blue" %)**Working Mode:** (%%)In this mode, Sensor will work as NB-IoT Sensor to Join NB-IoT network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
130 130  
131 131  
132 -== 1.7 Button & LEDs ==
122 +== 1.6 Button & LEDs ==
133 133  
134 134  
135 135  [[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675071855856-879.png]]
... ... @@ -148,10 +148,10 @@
148 148  )))
149 149  |(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means device is in Deep Sleep Mode.
150 150  
151 -== 1.8 BLE connection ==
141 +== 1.7 BLE connection ==
152 152  
153 153  
154 -SW3L-NB support BLE remote configure and firmware update.
144 +DS03A-NB support BLE remote configure and firmware update.
155 155  
156 156  
157 157  BLE can be used to configure the parameter of sensor or see the console output from sensor. BLE will be only activate on below case:
... ... @@ -163,19 +163,19 @@
163 163  If there is no activity connection on BLE in 60 seconds, sensor will shut down BLE module to enter low power mode.
164 164  
165 165  
166 -== 1.9 Pin Definitions & Switch ==
156 +== 1.8 Pin Definitions & Switch ==
167 167  
168 168  
169 169  [[image:image-20230819104805-5.png]]
170 170  
171 171  
172 -=== 1.9.1 Jumper JP2 ===
162 +=== 1.8.1 Jumper JP2 ===
173 173  
174 174  
175 175  Power on Device when put this jumper.
176 176  
177 177  
178 -=== 1.9.2 BOOT MODE / SW1 ===
168 +=== 1.8.2 BOOT MODE / SW1 ===
179 179  
180 180  
181 181  **1)** (% style="color:blue" %)**ISP**(%%): upgrade mode, device won't have any signal in this mode. but ready for upgrade firmware. LED won't work. Firmware won't run.
... ... @@ -183,7 +183,7 @@
183 183  **2)** (% style="color:blue" %)**Flash**(%%): work mode, device starts to work and send out console output for further debug
184 184  
185 185  
186 -=== 1.9.3 Reset Button ===
176 +=== 1.8.3 Reset Button ===
187 187  
188 188  
189 189  Press to reboot the device.
... ... @@ -191,7 +191,7 @@
191 191  (% style="display:none" %)
192 192  
193 193  
194 -== 1.10 Mechanical ==
184 +== 1.9 Mechanical ==
195 195  
196 196  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual/WebHome/1675143884058-338.png?rev=1.1||alt="1675143884058-338.png"]]
197 197  
... ... @@ -204,38 +204,35 @@
204 204  **Probe Mechanical:**
205 205  
206 206  
207 -(% style="color:blue" %)**DW-004 Flow Sensor: diameter: G1/2” / DN15.  450 pulse = 1 L**
197 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654741444887-479.png?width=513&height=399&rev=1.1||alt="1654741444887-479.png"]]
208 208  
209 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L%20LoRaWAN%20Outdoor%20Flow%20Sensor/WebHome/image-20220519091350-1.png?width=722&height=385&rev=1.1||alt="image-20220519091350-1.png"]]
210 210  
211 211  
212 -(% style="color:blue" %)**006: DW-006 Flow Sensor: diameter: G3/4” / DN20.  390 pulse = 1 L**
201 +== 1.10 Magnet Distance ==
213 213  
214 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L%20LoRaWAN%20Outdoor%20Flow%20Sensor/WebHome/image-20220519091423-2.png?width=723&height=258&rev=1.1||alt="image-20220519091423-2.png"]]
215 215  
204 +* Wood Door: 10mm ~~ 30mm
205 +* Iron Door: 30 ~~ 45mm
216 216  
217 -(% style="color:blue" %)**010: DW-010 Flow Sensor: diameter: G 1” / DN25. 64 pulse = 1 L**
218 218  
219 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L%20LoRaWAN%20Outdoor%20Flow%20Sensor/WebHome/image-20220519091423-3.png?width=724&height=448&rev=1.1||alt="image-20220519091423-3.png"]]
220 220  
209 += 2. Use DS03A-NB to communicate with IoT Server =
221 221  
222 -= 2. Use SW3L-NB to communicate with IoT Server =
223 -
224 224  == 2.1 Send data to IoT server via NB-IoT network ==
225 225  
226 226  
227 -The SW3L-NB is equipped with a NB-IoT module, the pre-loaded firmware in SW3L-NB will get environment data from sensors and send the value to local NB-IoT network via the NB-IoT module.  The NB-IoT network will forward this value to IoT server via the protocol defined by SW3L-NB.
214 +The DS03A-NB is equipped with a NB-IoT module, the pre-loaded firmware in DS03A-NB will get environment data from sensors and send the value to local NB-IoT network via the NB-IoT module.  The NB-IoT network will forward this value to IoT server via the protocol defined by DS03A-NB.
228 228  
229 229  
230 230  Below shows the network structure:
231 231  
232 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L-NB_NB-IoT_Flow_Sensor_User_Manual/WebHome/image-20231010091546-2.png?width=909&height=348&rev=1.1||alt="image-20231010091546-2.png"]]
219 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/DS03A-NB_NB-IoT_Door_Sensor_User_Manual/WebHome/image-20231011093807-6.png?width=879&height=278&rev=1.1||alt="image-20231011093807-6.png"]]
233 233  
234 234  
235 -There are two version: (% style="color:blue" %)**-GE**(%%) and (% style="color:blue" %)**-1D**(%%) version of SW3L-NB.
222 +There are two version: (% style="color:blue" %)**-GE**(%%) and (% style="color:blue" %)**-1D**(%%) version of DS03A-NB.
236 236  
237 237  
238 -(% style="color:blue" %)**GE Version**(%%): This version doesn't include SIM card or point to any IoT server. User needs to use AT Commands to configure below two steps to set SW3L-NB send data to IoT server.
225 +(% style="color:blue" %)**GE Version**(%%): This version doesn't include SIM card or point to any IoT server. User needs to use AT Commands to configure below two steps to set DS03A-NB send data to IoT server.
239 239  
240 240  * Install NB-IoT SIM card and configure APN. See instruction of [[Attach Network>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H2.AttachNetwork]].
241 241  
... ... @@ -265,13 +265,13 @@
265 265  [[image:image-20230819113244-11.png||height="141" width="367"]]
266 266  )))|(% style="width:170px" %)
267 267  
268 -(% style="color:blue" %)**1D Version**(%%): This version has 1NCE SIM card pre-installed and configure to send value to DataCake. User Just need to select the sensor type in DataCake and Activate SW3L-NB and user will be able to see data in DataCake. See here for [[DataCake Config Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.4Datacake]].
255 +(% style="color:blue" %)**1D Version**(%%): This version has 1NCE SIM card pre-installed and configure to send value to DataCake. User Just need to select the sensor type in DataCake and Activate DS03A-NB and user will be able to see data in DataCake. See here for [[DataCake Config Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.4Datacake]].
269 269  
270 270  
271 271  == 2.2 ​Payload Types ==
272 272  
273 273  
274 -To meet different server requirement, SW3L-NB supports different payload type.
261 +To meet different server requirement, DS03A-NB supports different payload type.
275 275  
276 276  **Includes:**
277 277  
... ... @@ -297,7 +297,7 @@
297 297  
298 298  This is the General Json Format. As below:
299 299  
300 -(% style="color:#4472c4" %)**{"IMEI":"866207058378443","Model":"SW3L-NB","distance":217,"battery":3.54,"signal":24,"1":{221,2023/09/20 09:47:01},"2":{0,2023/09/20 09:15:04},"3":{0,2023/09/20 09:00:04},"4":{0,2023/09/20 08:45:03},"5":{0,2023/09/20 08:30:03},"6":{0,2023/09/20 08:15:03},"7":{0,2023/09/20 08:00:04},"8":{0,2023/09/20 07:45:04}}**
287 +(% style="color:#4472c4" %)**{"IMEI":"866207058378443","Model":"DS03A-NB","flow":217,"battery":3.54,"signal":24,"1":{221,2023/09/20 09:47:01},"2":{0,2023/09/20 09:15:04},"3":{0,2023/09/20 09:00:04},"4":{0,2023/09/20 08:45:03},"5":{0,2023/09/20 08:30:03},"6":{0,2023/09/20 08:15:03},"7":{0,2023/09/20 08:00:04},"8":{0,2023/09/20 07:45:04}}**
301 301  
302 302  
303 303  [[image:image-20230920175015-3.png||height="613" width="890"]]
... ... @@ -307,7 +307,7 @@
307 307  
308 308  * Distance , Battery & Signal are the value at uplink time.
309 309  
310 -* Json entry 1 ~~ 8 are the last 1 ~~ 8 sampling data as specify by (% style="color:#037691" %)**AT+NOUD=8 ** (%%)Command. Each entry includes (from left to right): Distance, Sampling time.
297 +* Json entry 1 ~~ 8 are the last 1 ~~ 8 sampling data as specify by (% style="color:#037691" %)**AT+NOUD=8 ** (%%)Command. Each entry includes (from left to right): Water Flow, Sampling time.
311 311  
312 312  === 2.2.2 HEX format Payload(Type~=0) ===
313 313  
... ... @@ -328,7 +328,7 @@
328 328  
329 329  These bytes include the hardware and software version.
330 330  
331 -(% style="color:#037691" %)**Higher byte:**(%%) Specify Sensor Model: 0x0b for SW3L-NB
318 +(% style="color:#037691" %)**Higher byte:**(%%) Specify Sensor Model: 0x12 for DS03A-NB
332 332  
333 333  (% style="color:#037691" %)**Lower byte:**(%%) Specify the software version: 0x64=100, means firmware version 1.0.0
334 334  
... ... @@ -355,11 +355,6 @@
355 355  **99**    Not known or not detectable
356 356  
357 357  
358 -(% style="color:blue" %)**Distance:  **
359 -
360 -Ex1: 0x03a4 = 932 mm
361 -
362 -
363 363  (% style="color:blue" %)**Timestamp:   **
364 364  
365 365  Unit Timestamp Example: 650abc40(H) = 1695202368(D)
... ... @@ -372,7 +372,7 @@
372 372  
373 373  Type3 payload special design for ThingsBoard, it will also configure other default server to ThingsBoard.
374 374  
375 -(% style="color:#4472c4" %)** {"IMEI": "866207058378443","Model": "SW3L","distance": 502,"battery": 3.57,"signal": 23}**
357 +(% style="color:#4472c4" %)** {"IMEI": "866207058378443","Model": "DS03A","flow": 502,"battery": 3.57,"signal": 23}**
376 376  
377 377  [[image:image-20230922094043-2.png||height="558" width="851"]]
378 378  
... ... @@ -387,7 +387,7 @@
387 387  
388 388  As below:
389 389  
390 -(% style="color:#4472c4" %)**field1=Distance value&field2=Battery value&field3=Singal value**
372 +(% style="color:#4472c4" %)**field1=Flow value&field2=Battery value&field3=Singal value**
391 391  
392 392  [[image:image-20230921104741-1.png||height="565" width="826"]]
393 393  
... ... @@ -394,326 +394,328 @@
394 394  
395 395  == 2.3  ​Uplink Payload ==
396 396  
397 -=== 2.3.1 Sensor Configuration, FPORT~=4 ===
379 +=== 2.3.2  Sensor Configuration, FPORT~=4 ===
398 398  
399 399  
400 -SW3L-NB will only send this command after getting the downlink command **(0x26 02)** from the server.
382 +DS03A-NB will only send this command after getting the downlink command **(0x26 02)** from the server.
401 401  
402 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
403 -|(% style="background-color:#4f81bd; color:white; width:70px" %) **Size(bytes)**|(% style="background-color:#4f81bd; color:white; width:105px" %)**3**|(% style="background-color:#4f81bd; color:white; width:60px" %)**1**|(% style="background-color:#4f81bd; color:white; width:96px" %)**1**|(% style="background-color:#4f81bd; color:white; width:105px" %)**2**|(% style="background-color:#4f81bd; color:white; width:74px" %)**1**
404 -|**Value**|(% style="width:104px" %)TDC(unit:sec)|(% style="width:43px" %)N/A|(% style="width:91px" %)Stop Timer|(% style="width:100px" %)Alarm Timer|(% style="width:69px" %)Reserve
384 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
385 +|(% colspan="8" style="background-color:#d9e2f3; color:#0070c0; width:515px" %)**Sensor Configuration FPORT=4**
386 +|**Size(bytes)**|(% style="width:75px" %)**3**|(% style="width:50px" %)**1**|(% style="width:100px" %)**1**|(% style="width:90px" %)**2**|(% style="width:100px" %)**1**|(% style="width:100px" %)**2**|(% style="width:98px" %)**1**
387 +|**Value**|(% style="width:75px" %)TDC (unit:sec)|(% style="width:77px" %)Disalarm|(% style="width:96px" %)(((
388 +Keep status1
389 +)))|(% style="width:99px" %)(((
390 +Keep time1(unit: sec)
391 +)))|(% style="width:87px" %)Keep status2|(% style="width:97px" %)(((
392 +Keep time2(unit: sec)
393 +)))|(% style="width:98px" %)(((
394 +Alarm interval(unit: min)
395 +)))
405 405  
406 406  Example parse in TTNv3
407 407  
408 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L-LB_LoRaWAN_Flow_Sensor_User_Manual/WebHome/image-20230614172555-4.png?width=853&height=151&rev=1.1||alt="image-20230614172555-4.png"]]
399 +[[image:image-20230630155527-3.png||height="146" width="902"]]
409 409  
410 410  
411 -* (% style="color:blue" %)**TDC: (default: 0x0004B0)**
402 +* (((
403 +(% style="color:blue" %)**TDC: (default: 0x001C20)**
404 +)))
412 412  
413 -Uplink interval for the total pulse count, default value is 0x0004B0 which is 1200 seconds = 20 minutes.
406 +Uplink interval for the Open/Close Event, default value is 0x001C20 which is 7200 seconds = 2 hours.
414 414  
415 415  
416 -* (% style="color:blue" %)**STOP Duration & Alarm Timer**
409 +* (((
410 +(% style="color:blue" %)**Disalarm: (default: 0)**
411 +)))
417 417  
418 -Shows the configure value of [[Alarm for continuously water flow>>||anchor="H2.7Alarmforcontinuouslywaterflow"]]
413 + **If Disalarm = 1**, DS03A-NB will only send uplink at every TDC periodically. This is normally use for pulse meter application, in this application, there are many open/close event, and platform only care about the total number of pulse.
419 419  
415 + **If Disalarm = 0**, DS03A-NB will send uplink at every TDC periodically and send data on each open/close event. This is useful for the application user need to monitor the open/close event in real-time.
420 420  
421 -=== 2.3.2 Water Flow Value, Uplink FPORT~=2 ===
422 422  
418 +(% style="color:red" %)** Note: When Disalarm=0, a high frequently open/close event will cause lots of uplink and drain battery very fast. **
423 423  
424 -(((
425 -SW3L-NB will send this uplink **after** Device Status once join the NB-IoT network successfully. And SW3L-NB will:
426 -)))
427 427  
428 -(((
429 -periodically send this uplink every 20 minutes, this interval [[can be changed>>||anchor="H2.10SetTransmitIntervalTime"]].
421 +* (((
422 +(% style="color:blue" %)**Keep Status1 & Keep Time1 & Keep Status2 & Keep Time2**
430 430  )))
431 431  
432 -(((
433 -Uplink Payload totals 11 bytes.
425 +Shows the configure value of [[Alarm Base on Timeout Feature>>||anchor="H3.3.3A0AlarmBaseonTimeout"]]
426 +
427 +
428 +
429 +* (((
430 +(% style="color:blue" %)**Alarm interval(default: 0)**
434 434  )))
435 435  
436 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
437 -|=(% colspan="6" style="width: 515px; background-color:#4F81BD;color:white" %)**Water Flow Value,  FPORT=2**
438 -|(% style="width:50px" %)**Size(bytes)**|(% style="width:110px" %)**1**|(% style="width:120px" %)**4**|(% style="width:110px" %)**1**|(% style="width:55px" %)**1**|(% style="width:70px" %)**4**
439 -|(% style="width:110px" %)**Value**|(% style="width:81px" %)Calculate Flag & [[Alarm>>||anchor="H2.7Alarmforcontinuouslywaterflow"]]|(% style="width:95px" %)(((
440 -Total pulse Or Last Pulse
441 -)))|(% style="width:78px" %)(((
442 -MOD & PA4_status & PB15_status
443 -)))|(% style="width:92px" %)Reserve(0x01)|(% style="width:134px" %)Unix TimeStamp
433 +When the state of the door sensor has not been changed after the timeout alarm, the device will send a uplink every alarm interval. It will stop the alarm until the state of the door sensor is changed after the timeout alarm.
444 444  
445 -**Calculate Flag & Alarm:**
446 446  
447 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)
448 -|(% style="background-color:#4f81bd; color:white; width:70px" %)**Size(bit)**|(% style="background-color:#4f81bd; color:white; width:70px" %)**[bit7:bit6]**|(% style="background-color:#4f81bd; color:white; width:90px" %)**[bit5:bit2]**|(% style="background-color:#4f81bd; color:white; width:140px" %)**bit1**|(% style="background-color:#4f81bd; color:white; width:130px" %)**bit0**
449 -|(% style="width:88px" %)**Value**|(% style="width:117px" %)Reserve|(% style="width:117px" %)Calculate Flag|(% style="width:169px" %)Alarm: 0: No Alarm; 1: Alarm|(% style="width:150px" %)TDC flag 0:No;1:Yes
436 +=== 2.3.3  Real-Time Open/Close Status, Uplink FPORT~=2 ===
450 450  
451 -**MOD & PA4_status & PB15_status:**
452 452  
453 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:230px" %)
454 -|(% style="background-color:#4f81bd; color:white; width:50px" %)**Size(bit)**|(% style="background-color:#4f81bd; color:white; width:60px" %)**bit7**|(% style="background-color:#4f81bd; color:white; width:60px" %)**bit6**|(% style="background-color:#4f81bd; color:white; width:60px" %)**[bit5:bit0]**
455 -|(% style="width:88px" %)**Value**|(% style="width:117px" %)PA4_status|(% style="width:117px" %)PB15_status|(% style="width:118px" %)MOD
439 +DS03A-NB will send this uplink **after** Device Status once join the LoRaWAN network successfully. And DS03A-NB will send uplinks when:
456 456  
457 -(% style="color:#037691" %)** **[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L-LB_LoRaWAN_Flow_Sensor_User_Manual/WebHome/image-20230626093242-1.png?width=892&height=276&rev=1.1||alt="image-20230626093242-1.png"]]
441 +* Every 2 hours, this interval [[can be changed>>||anchor="H3.3.1A0SetTransmitIntervalTime"]].
442 +* There is an Open/Close event.  (This info can be disabled by AT+DISALARM=1)
458 458  
444 +**1) When (% style="color:blue" %)AT+TTRCHANNEL=1(%%), Uplink Payload totals (% style="color:blue" %)11 bytes. (Default mode)(%%)**
459 459  
460 -* (((
461 -(% style="color:blue" %)**Calculate Flag**
462 -)))
446 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
447 +|=(% colspan="5" style="background-color:#D9E2F3;color:#0070C0;width:515px" %)**Real-Time Open/Close Status, FPORT=2**
448 +|(% style="width:94px" %)**Size(bytes)**|(% style="width:97px" %)**1**|(% style="width:95px" %)**3**|(% style="width:119px" %)**3**|(% style="width:107px" %)**4**
449 +|(% style="width:95px" %)**Value**|(% style="width:97px" %)(((
450 +Status & [[Alarm>>||anchor="H3.3.4A0TTRIG126TTRIG2timeoutstatusalarm"]]
451 +)))|(% style="width:95px" %)Total open door events|(% style="width:119px" %)(((
452 +The last door open duration (unit: sec)
453 +)))|(% style="width:108px" %)[[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]
463 463  
464 -(((
465 -The calculate flag is a user defined field, IoT server can use this flag to handle different meters with different pulse factors. For example, if there are 100 Flow Sensors, meters 1 ~~50 are 1 liter/pulse and meters 51 ~~ 100 has 1.5 liter/pulse.
466 -)))
455 +**Status & Alarm:**
467 467  
468 -(((
469 -**Example: in the default payload:**
457 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
458 +|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:60px" %)**[bit7:bit4]**|(% style="background-color:#d9e2f3; color:#0070c0; width:80px" %)**bit3**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**bit2**|(% style="background-color:#d9e2f3; color:#0070c0; width:120px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:105px" %)**bit0**
459 +|(% style="width:76px" %)**Value**|(% style="width:96px" %)Reserve|(% style="width:110px" %)(((
460 +Count mod
461 +)))|(% style="width:106px" %)TDC flag 0:No;1:Yes|(% style="width:148px" %)(((
462 +Alarm 0: No Alarm; 1: Alarm
463 +)))|(% style="width:131px" %)(((
464 +Status 0: Close; 1: Open
470 470  )))
471 471  
467 +[[image:image-20230630155451-2.png||height="246" width="928"]]
468 +
469 +
472 472  * (((
473 -calculate flag=0: for SW3L-004 Flow Sensor: 450 pulse = 1 L
471 +(% style="color:blue" %)**Count mod:Default=0**
474 474  )))
473 +
474 +0: Uplink total open door times since factory
475 +
476 +1: Uplink total open door times since last FPORT=2 uplink.
477 +
478 +
479 +* (% style="color:blue" %)**TDC flag**
480 +
481 +When the flag is 1, it means sending packets at normal time intervals.
482 +
483 +Otherwise, it is a packet sent at non-TDC time.
484 +
485 +
475 475  * (((
476 -calculate flag=1: for SW3L-006 Flow Sensor: 390 pulse = 1 L
487 +(% style="color:#0000ff" %)**Alarm**
477 477  )))
489 +
490 +See [[Alarm Base on Timeout>>||anchor="H3.3.3A0AlarmBaseonTimeout"]]
491 +
492 +
478 478  * (((
479 -calculate flag=2: for SW3L-010 Flow Sensor: 64 pulse = 1 L
494 +(% style="color:blue" %)**Status**
480 480  )))
481 481  
482 -(((
483 -Default value: 0. 
497 +This bit is 1 when the door sensor is open and 0 when it is close.
498 +
499 +
500 +* (((
501 +(% style="color:blue" %)**Total open door events**
484 484  )))
485 485  
486 -(((
487 -Range (4 bits): (b)0000 ~~ (b) 1111
504 +Total pulse/counting base on open door.
488 488  
489 -If user use with a meter for example is 0.02L/pulse. To proper decode the correct value in server,
506 +Range (3 Bytes) : 0x000000 ~~ 0xFFFFFF . Max: 16777215
490 490  
491 -1) User can set the Calculate Flag of this sensor to 3.
492 492  
493 -2) In server side, when a sensor data arrive, the decoder will check the value of Calculate Flag, It the value is 3, the total volume = 0.02 x Pulse Count.
509 +* (((
510 +(% style="color:blue" %)**The last door open duration**
494 494  )))
495 495  
496 -(((
497 -(% style="color:red" %)**NOTE: User need to set Calculate Flag to proper value before use Flow Sensor. Downlink or AT Command see: **(%%)Refer: [[Set Calculate Flag>>||anchor="H2.8Setthecalculateflag"]]
513 +Door sensor last open duration.
498 498  
499 -(((
500 -
501 -)))
502 -)))
515 +Unit: sec.
503 503  
517 +[[image:image-20230701094042-1.png||height="154" width="763"]]
504 504  
505 -* (((
506 -(% style="color:blue" %)**Alarm**
507 -)))
508 508  
509 -(((
510 -See [[Alarm for continuously water flow>>||anchor="H2.7Alarmforcontinuouslywaterflow"]]
511 -)))
520 +**2) When (% style="color:blue" %)AT+TTRCHANNEL=2(%%), Uplink Payload totals (% style="color:blue" %)18 bytes(%%)**(% style="color:blue" %).
512 512  
513 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L%20LoRaWAN%20Outdoor%20Flow%20Sensor/WebHome/image-20220519095946-4.png?width=724&height=65&rev=1.1||alt="image-20220519095946-4.png"]]
522 +(When the maximum DR of some frequencies is 11 bytes, it will cause the server to receive empty packets)
514 514  
524 +(% style="color:red" %)**Note:When using the AT+TTRCHANNEL=2 command, the Datalog function cannot be used.**
515 515  
516 -(((
517 -* (% style="color:blue" %)**TDC flag**
526 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
527 +|=(% colspan="8" style="background-color:#D9E2F3;color:#0070C0; width: 515px;" %)**Real-Time Open/Close Status, FPORT=2**
528 +|(% style="width:50px" %)**Size(bytes)**|(% style="width:97px" %)**1**|(% style="width:95px" %)**3**|(% style="width:125px" %)**3**|(% style="width:100px" %)**4**|(% style="width:86px" %)**1**|(% style="width:96px" %)**3**|(% style="width:126px" %)**3**
529 +|(% style="width:95px" %)**Value**|(% style="width:97px" %)(((
530 +Status1 & Alarm1
531 +)))|(% style="width:95px" %)Total open door events1|(% style="width:125px" %)(((
532 +The last door open duration1 (unit: sec)
533 +)))|(% style="width:100px" %)[[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]|(% style="width:86px" %)(((
534 +Status2 & Alarm2
535 +)))|(% style="width:96px" %)Total open door events2|(% style="width:126px" %)The last door open duration2 (unit: sec)
518 518  
519 -When the flag is 1, it means sending packets at normal time intervals.
537 +**Status1 & Alarm1:**
520 520  
521 -Otherwise, it is a packet sent at non-TDC time.
539 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:514px" %)
540 +|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:60px" %)**[bit7:bit4]**|(% style="background-color:#d9e2f3; color:#0070c0; width:70px" %)**bit3**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**bit2**|(% style="background-color:#d9e2f3; color:#0070c0; width:117px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:117px" %)**bit0**
541 +|(% style="width:76px" %)**Value**|(% style="width:96px" %)Reserve|(% style="width:99px" %)(((
542 +Count mod
543 +)))|(% style="width:103px" %)TDC flag 0:No;1:Yes|(% style="width:216px" %)(((
544 +Alarm1 0: No Alarm; 1: Alarm (PA8 of pin)
545 +)))|(% style="width:181px" %)(((
546 +Status1 0: Close; 1: Open (PA8 of pin)
522 522  )))
523 523  
524 -* (((
525 -(% style="color:blue" %)**Total pulse**
526 -)))
549 +**Status2 & Alarm2:**
527 527  
528 -(((
529 -Total pulse/counting since factory
551 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
552 +|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:60px" %)**[bit7:bit2]**|(% style="background-color:#d9e2f3; color:#0070c0; width:200px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:200px" %)**bit0**
553 +|(% style="width:76px" %)**Value**|(% style="width:113px" %)Reserve|(% style="width:219px" %)(((
554 +Alarm2 0: No Alarm; 1: Alarm (PA4 of pin)
555 +)))|(% style="width:181px" %)(((
556 +Status2 0: Close; 1: Open (PA4 of pin)
530 530  )))
531 531  
532 -(((
533 -Range (4 Bytes) : 0x00000000~~ 0xFFFFFFFF .
559 +[[image:image-20230630155908-6.png||height="295" width="927"]]
534 534  
535 -
536 -)))
537 537  
538 538  * (((
539 -(% style="color:blue" %)**Last Pulse**
563 +(% style="color:blue" %)**Count mod:Default=0**
540 540  )))
541 541  
542 -(((
543 -Total pulse since last FPORT=2 uplink. (Default 20 minutes)
544 -)))
566 +0: Uplink total open door times since factory
545 545  
546 -(((
547 -Range (4 Bytes) : 0x00000000~~ 0xFFFFFFFF .
568 +1: Uplink total open door times since last FPORT=2 uplink.
548 548  
549 549  
550 -* (((
551 -(% style="color:blue" %)**PA4_status: Support digital level input below 3.3V**
552 -)))
571 +* (% style="color:blue" %)**TDC flag**
553 553  
554 -(((
555 -0 ~-~-> PA4 is at low level.
556 -)))
573 +When the flag is 1, it means sending packets at normal time intervals.
557 557  
558 -(((
559 -1 ~-~-> PA4 is at high level.
575 +Otherwise, it is a packet sent at non-TDC time.
560 560  
561 561  
562 562  * (((
563 -(% style="color:blue" %)**PB15_status: Support digital level input below 3.3V**
579 +(% style="color:#0000ff" %)**Alarm1 or Alarm2**
564 564  )))
565 565  
566 -(((
567 -0 ~-~-> PB15 is at low level.
568 -)))
582 +See [[Alarm Base on Timeout>>||anchor="H3.3.3A0AlarmBaseonTimeout"]]
569 569  
570 -(((
571 -1 ~-~-> PB15 is at high level..
572 -)))
573 -)))
574 -)))
575 575  
576 576  * (((
577 -(% style="color:blue" %)**MOD: Default =0**
586 +(% style="color:blue" %)**Status1 **(% style="color:#0000ff" %)**or **(% style="color:blue" %)**Status2**
578 578  )))
579 579  
580 -(((
581 -MOD=0 ~-~-> Uplink Total Pulse since factory
582 -)))
589 +This bit is 1 when the door sensor is open and 0 when it is close.
583 583  
584 -(((
585 -MOD=1 ~-~-> Uplink total pulse since last FPORT=2 uplink.
586 586  
587 -
588 -)))
589 -
590 590  * (((
591 -(% style="color:blue" %)**Water Flow Value**
593 +(% style="color:blue" %)**Total open door events1 **(% style="color:#0000ff" %)**or**(% style="color:blue" %)** Total open door events2**
592 592  )))
593 593  
594 -(((
595 -**Total Water Flow Volume = (Calculate Flag) x (Total Pulse)=9597/450=21.3L**
596 -)))
596 +Total pulse/counting base on open door.
597 597  
598 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L%20LoRaWAN%20Outdoor%20Flow%20Sensor/WebHome/image-20220519095946-5.png?width=727&height=50&rev=1.1||alt="image-20220519095946-5.png"]]
598 +Range (3 Bytes) : 0x000000 ~~ 0xFFFFFF . Max: 16777215
599 599  
600 600  
601 -(((
602 -**Total Water Flow for TDC timer = (Calculate Flag) x (Last Pulse)=79/450=0.2L**
601 +* (((
602 +(% style="color:blue" %)**The last door open duration1 **(% style="color:#0000ff" %)**or**(% style="color:blue" %)** The last door open duration2**
603 603  )))
604 604  
605 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L%20LoRaWAN%20Outdoor%20Flow%20Sensor/WebHome/image-20220519095946-6.png?width=733&height=43&rev=1.1||alt="image-20220519095946-6.png"]] ** **
605 +Door sensor last open duration.
606 606  
607 +Unit: sec.
607 607  
608 -=== 2.3.3 Historical Water Flow Status, FPORT~=3 ===
609 +[[image:image-20230701094042-1.png||height="154" width="763"]]
609 609  
610 610  
611 -(((
612 -SW3L-NB stores sensor values and users can retrieve these history values via the downlink command.
613 -)))
612 +=== 2.3.4  Historical Door Open/Close Event, FPORT~=3 ===
614 614  
615 -(((
616 -The historical payload includes one or multiplies entries and every entry has the same payload as Real-Time water flow status.
617 617  
618 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
619 -|=(% colspan="6" style="width: 515px; background-color:#4F81BD;color:white" %)**Water Flow Value,  FPORT=3**
620 -|(% style="width:50px" %)**Size(bytes)**|(% style="width:110px" %)**1**|(% style="width:120px" %)**4**|(% style="width:110px" %)**1**|(% style="width:55px" %)**1**|(% style="width:70px" %)**4**
621 -|(% style="width:110px" %)**Value**|(% style="width:81px" %)Calculate Flag & [[Alarm>>||anchor="H2.7Alarmforcontinuouslywaterflow"]]|(% style="width:95px" %)(((
622 -Total pulse Or Last Pulse
623 -)))|(% style="width:78px" %)(((
624 -MOD & PA4_status & PB15_status
625 -)))|(% style="width:92px" %)Reserve(0x01)|(% style="width:134px" %)Unix TimeStamp
615 +DS03A-NB stores sensor values and users can retrieve these history values via the [[downlink command>>||anchor="H2.5DatalogFeature"]].
626 626  
627 -**Calculate Flag & Alarm:**
617 +The historical payload includes one or multiplies entries and every entry has the same payload as Real-Time open/close status.
628 628  
629 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
630 -|(% style="background-color:#4f81bd; color:white; width:50px" %)**Size(bit)**|(% style="background-color:#4f81bd; color:white; width:89px" %)**bit7**|(% style="background-color:#4f81bd; color:white; width:89px" %)**bit6**|(% style="background-color:#4f81bd; color:white; width:69px" %)**[bit5:bit2]**|(% style="background-color:#4f81bd; color:white; width:129px" %)**bit1**|(% style="background-color:#4f81bd; color:white; width:89px" %)**bit0**
631 -|(% style="width:88px" %)**Value**|(% style="width:96px" %)(((
632 -No ACK message
633 -)))|(% style="width:94px" %)Poll Message Flag|(% style="width:115px" %)Calculate Flag|(% style="width:136px" %)Alarm: 0: No Alarm; 1: Alarm|(% style="width:120px" %)TDC flag 0:No;1:Yes
619 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
620 +|=(% colspan="5" style="background-color:#D9E2F3;color:#0070C0;width:515px" %)**Real-Time Open/Close Status, FPORT=3**
621 +|(% style="width:60px" %)**Size(bytes)**|(% style="width:80px" %)**1**|(% style="width:120px" %)**3**|(% style="width:150px" %)**3**|(% style="width:90px" %)**4**
622 +|(% style="width:95px" %)**Value**|(% style="width:97px" %)(((
623 +Status & [[Alarm>>||anchor="H3.3.3A0AlarmBaseonTimeout"]]
624 +)))|(% style="width:95px" %)Total open door events|(% style="width:119px" %)(((
625 +The last door open duration (unit: sec)
626 +)))|(% style="width:108px" %)[[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]
634 634  
635 -**MOD & PA4_status & PB15_status:**
628 +**Status & Alarm:**
636 636  
637 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:240px" %)
638 -|(% style="background-color:#4f81bd; color:white; width:60px" %)**Size(bit)**|(% style="background-color:#4f81bd; color:white; width:60px" %)**bit7**|(% style="background-color:#4f81bd; color:white; width:60px" %)**bit6**|(% style="background-color:#4f81bd; color:white; width:60px" %)**[bit5:bit0]**
639 -|(% style="width:88px" %)**Value**|(% style="width:117px" %)PA4_status|(% style="width:117px" %)PB15_status|(% style="width:118px" %)MOD
630 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
631 +|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:75px" %)**bit7**|(% style="background-color:#d9e2f3; color:#0070c0; width:65px" %)**bit6**|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**[bit5:bit4]**|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**bit3**|(% style="background-color:#d9e2f3; color:#0070c0; width:70px" %)**bit2**|(% style="background-color:#d9e2f3; color:#0070c0; width:80px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:75px" %)**bit0**
632 +|(% style="width:76px" %)**Value**|(% style="width:88px" %)No ACK message|(% style="width:92px" %)Poll Message Flag|(% style="width:89px" %)Reserve|(% style="width:90px" %)(((
633 +Count mod
634 +)))|(% style="width:95px" %)(((
635 +TDC flag 0:No; 1:Yes
636 +)))|(% style="width:116px" %)(((
637 +Alarm 0: No Alarm; 1: Alarm
638 +)))|(% style="width:112px" %)(((
639 +Status 0:Close; 1: Open
640 640  )))
641 641  
642 642  * (((
643 -Each data entry is 11 bytes and has the same structure as [[real time water flow status>>||anchor="H2.3.2A0WaterFlowValue2CUplinkFPORT3D2"]], to save airtime and battery, SW3L will send max bytes according to the current DR and Frequency bands.
643 +Each data entry is 11 bytes and has the same structure as [[Real-Time open/close status>>||anchor="H2.3.3A0Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2"]], to save airtime and battery, DS03A-NB will send max bytes according to the current DR and Frequency bands.
644 644  )))
645 645  
646 -(((
647 647  For example, in the US915 band, the max payload for different DR is:
648 -)))
649 649  
650 650  (((
651 -(% style="color:blue" %)**a) DR0:**(%%) max is 11 bytes so one entry of data
649 +**~1. DR0**: max is 11 bytes so one entry of data
652 652  )))
653 653  
654 654  (((
655 -(% style="color:blue" %)**b) DR1:**(%%) max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
653 +**2. DR1**: max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
656 656  )))
657 657  
658 658  (((
659 -(% style="color:blue" %)**c) DR2:**(%%) total payload includes 11 entries of data
657 +**3. DR2**: total payload includes 11 entries of data
660 660  )))
661 661  
662 662  (((
663 -(% style="color:blue" %)**d) DR3:**(%%) total payload includes 22 entries of data.
661 +**4. DR3**: total payload includes 22 entries of data.
664 664  )))
665 665  
666 -(((
667 -If SW3L-NB doesn't have any data in the polling time. It will uplink 11 bytes of 0
664 +If DS03A-NB doesn't have any data in the polling time. It will uplink 11 bytes of 0
668 668  
669 -
670 -)))
666 +[[image:image-20230630155556-4.png||height="146" width="938"]]
671 671  
672 -(((
673 -(% style="color:#037691" %)**Downlink:**
674 -)))
668 +**Downlink:**
675 675  
676 -(((
677 -0x31 64 92 C5 AC 64 92 C7 8C 05
678 -)))
670 +0x31 64 9E 7D 34 64 9E 7E 9C 05
679 679  
680 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L-LB_LoRaWAN_Flow_Sensor_User_Manual/WebHome/image-20230626093440-2.png?width=890&height=160&rev=1.1||alt="image-20230626093440-2.png"]]
681 681  
673 +**Uplink:**
682 682  
683 -(((
684 -(% style="color:#037691" %)**Uplink:**
685 -)))
675 +45 00 00 00 00 00 00 64 9E 7D 48 40 00 00 00 00 00 63 64 9E 7D 9C 41 00 00 01 00 00 63 64 9E 7D A4 40 00 00 01 00 00 8D 64 9E 7E 31 43 00 00 02 00 00 8D 64 9E 7E 44 48 00 00 02 00 00 1F 64 9E 7E 59 4B 00 00 03 00 00 1F 64 9E 7E 6B
686 686  
687 -(((
688 -41 00 01 00 00 00 08 64 92 C5 E4 40 00 01 00 00 00 08 64 92 C6 06 49 41 01 00 00 00 00 64 92 C6 8B 49 81 01 00 00 00 00 64 92 C7 34 4A 01 01 00 00 00 2D 64 92 C7 7C
689 689  
690 -
691 -)))
678 +**Parsed Value:**
692 692  
693 -(((
694 -(% style="color:#037691" %)**Parsed Value:**
695 -)))
680 +[COUNTMOD, TDC_FLAG, ALARM,  DOOR_STATUS, OPEN_DOOR_TIMES, LAST_DOOR_OPEN_DURATION, TIME]
696 696  
697 -(((
698 -[TDC_flag, Alarm, Calculate Flag, PA4_status, PB15_status, MOD, Total pulse or Last Pulse,** **Water Flow Value, TIME]
699 -)))
700 700  
683 +[SUM,YES,FALSE,OPEN,0,0,2023-06-30 06:59:20],
701 701  
702 -(((
703 -[YES,FALSE,0,L,L, 0,8, 0.0,2023-06-21 09:41:56],
685 +[SUM,NO,FALSE,CLOSE,0,99,2023-06-30 07:00:44],
704 704  
705 -[NO,FALSE,0,L,L, 0,8, 0.0,2023-06-21 09:42:30],
687 +[SUM,NO,FALSE,OPEN, 1,99,2023-06-30 07:00:52],
706 706  
707 -[YES,FALSE,2,L,H,1,0, 0.0,2023-06-21 09:44:43],
689 +[SUM,NO,FALSE,CLOSE,1,141,2023-06-30 07:03:13],
708 708  
709 -[YES,FALSE,2,H,L,1,0, 0.0,2023-06-21 09:47:32],
691 +[SUM,NO,TRUE,OPEN, 2,141,2023-06-30 07:03:32],
710 710  
711 -[NO,TRUE ,2, L,L,1,45,0.7,2023-06-21 09:48:44],
712 -)))
693 +[PART,NO,FALSE,CLOSE,2,31,2023-06-30 07:03:53],
713 713  
714 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L-LB_LoRaWAN_Flow_Sensor_User_Manual/WebHome/image-20230626093703-3.png?width=894&height=156&rev=1.1||alt="image-20230626093703-3.png"]]
695 +[PART,NO,TRUE,OPEN, 3,31,2023-06-30 07:04:11],
715 715  
697 +[[image:image-20230630172740-1.png||height="199" width="868"]]
716 716  
699 +
700 +
717 717  == 2.4 Test Uplink and Change Update Interval ==
718 718  
719 719  
... ... @@ -729,7 +729,7 @@
729 729  == 2.5 Multi-Samplings and One uplink ==
730 730  
731 731  
732 -To save battery life, SW3L-NB will sample Distance data every 15 minutes and send one uplink every 2 hours. So each uplink it will include 8 stored data + 1 real-time data. They are defined by:
716 +To save battery life, DS03A-NB will sample Water Flow data every 15 minutes and send one uplink every 2 hours. So each uplink it will include 8 stored data + 1 real-time data. They are defined by:
733 733  
734 734  * (% style="color:#037691" %)**AT+TR=900**   (%%) ~/~/ The unit is seconds, and the default is to record data once every 900 seconds (15 minutes, the minimum can be set to 180 seconds)
735 735  
... ... @@ -743,7 +743,7 @@
743 743  == 2.6 Trggier an uplink by external interrupt ==
744 744  
745 745  
746 -SW3L-NB has an external trigger interrupt function. Users can use the PB15 pin to trigger the upload of data packets.
730 +DS03A-NB has an external trigger interrupt function. Users can use the PB15 pin to trigger the upload of data packets.
747 747  
748 748  (% style="color:blue" %)**AT command:**
749 749  
... ... @@ -757,164 +757,333 @@
757 757  
758 758  * (% style="color:#037691" %)**AT+INTMOD=3  **(%%) ~/~/ Trigger by rising edge
759 759  
760 -== 2.7 Alarm for continuously water flow ==
761 761  
762 762  
763 -(((
764 -This feature is to monitor and send Alarm for continuously water flow.
765 -)))
746 +== 2.7 Set Transmit Interval Time ==
766 766  
767 -(((
768 -Example case is for Toilet water monitoring, if some one push toilet button, the toilet will have water flow. If the toilet button has broken and can't returned to original state, the water flow will keep for hours or days which cause huge waste for water.
769 -)))
770 770  
771 771  (((
772 -To monitor this faulty and send alarm, there are two settings:
750 +Feature: Change NB-IoT End Node Transmit Interval.
773 773  )))
774 774  
775 -* (((
776 -(% style="color:blue" %)**Stop Duration: Unit: Second**
777 -)))
778 -
779 779  (((
780 -Default: 15s, If SW3L-NB didn't see any water flow in 15s, SW3L-NB will consider stop of water flow event.
754 +(% style="color:blue" %)**AT Command: AT+TDC**
781 781  )))
782 782  
783 -* (((
784 -(% style="color:blue" %)**Alarm Timer: Units: Minute; Default 0 minutes (means Alarm disable)**
757 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
758 +|=(% style="width: 156px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 137px;background-color:#4F81BD;color:white" %)**Function**|=(% style="background-color:#4F81BD;color:white" %)**Response**
759 +|(% style="width:156px" %)AT+TDC=?|(% style="width:137px" %)Show current transmit Interval|(((
760 +30000
761 +OK
762 +the interval is 30000ms = 30s
785 785  )))
786 -
787 -(((
788 -**Example:** 3 minutes, if SW3L-NB detect a start of water flow event and didn't detect a stop event within Alarm timer, SW3L-NB will send an Alarm to indicate a water flow abnormal alarm.
764 +|(% style="width:156px" %)AT+TDC=60000|(% style="width:137px" %)Set Transmit Interval|(((
765 +OK
766 +Set transmit interval to 60000ms = 60 seconds
789 789  )))
790 790  
791 791  (((
792 -So for example, If we set stop duration=15s and Alarm Timer=3minutes. If the toilet water flow continuously for more than 3 minutes, Sensor will send an alarm (in Confirmed MODE) to platform.
770 +(% style="color:blue" %)**Downlink Command: 0x01**
793 793  )))
794 794  
795 795  (((
796 -(% style="color:red" %)**Note:** **After this alarm is send, sensor will consider a stop of water flow and count for another new event. So if water flow waste last for 1 hour, Sensor will keep sending alarm every 3 minutes.**
774 +Format: Command Code (0x01) followed by 3 bytes time value.
797 797  )))
798 798  
799 799  (((
800 -(% style="color:blue" %)**AT Command to configure:**
778 +If the downlink payload=0100003C, it means set the END Node's Transmit Interval to 0x00003C=60(S), while type code is 01.
801 801  )))
802 802  
803 803  * (((
804 -AT+PTRIG=15,3  ~-~-> Set Stop duration: 15s, Alarm Timer: 3 minutes.
782 +Example 1: Downlink Payload: 0100001E  ~/~/ Set Transmit Interval (TDC) = 30 seconds
805 805  )))
784 +* (((
785 +Example 2: Downlink Payload: 0100003C  ~/~/ Set Transmit Interval (TDC) = 60 seconds
786 +)))
806 806  
788 +
789 +=== 3.3.3  Enable / Disable Alarm ===
790 +
791 +
792 +Feature: Enable/Disable Alarm for open/close event. Default value 0.
793 +
794 +(% style="color:blue" %)**AT Command: **
795 +
796 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
797 +|(% style="background-color:#d9e2f3; color:#0070c0; width:153px" %)**Command Example**|(% style="background-color:#d9e2f3; color:#0070c0; width:276px" %)**Function**|(% style="background-color:#d9e2f3; color:#0070c0; width:86px" %)**Response**
798 +|(% style="width:154px" %)AT+DISALARM=1|(% style="width:278px" %)End node will only send packets in TDC time.|OK
799 +|(% style="width:154px" %)AT+DISALARM=0|(% style="width:278px" %)End node will send packets in TDC time or status change for door sensor|OK
800 +
801 +(% style="color:blue" %)**Downlink Command: **
802 +
803 +0xA7 01  ~/~/ Same As AT+DISALARM=1
804 +
805 +0xA7 00  ~/~/ Same As AT+DISALARM=0
806 +
807 +
808 +=== 3.3.4  Alarm Base on Timeout ===
809 +
810 +
811 +DS03A-LB can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
812 +
807 807  * (((
808 -AT+ PTRIG=15,0  ~-~-> Default Value, disable water waste Alarm.
814 +(% style="color:blue" %)**Keep Status: Status to be monitor**
809 809  )))
810 810  
811 -(((
812 -(% style="color:blue" %)**Downlink Command to configure:** 
817 +(% style="color:#037691" %)**Keep Status = 1**(%%): Monitor Close to Open event
818 +
819 +(% style="color:#037691" %)**Keep Status = 0**(%%): Monitor Open to Close event
820 +
821 +
822 +* (((
823 +(% style="color:blue" %)**Keep Time: Timeout to send an Alarm**
813 813  )))
814 814  
815 -(((
816 -Command: **0xAA aa bb cc**
826 +Range 0 ~~ 65535(0xFFFF) seconds.
827 +
828 +If (% style="color:#037691" %)**keep time = 0**(%%), Disable Alarm Base on Timeout feature.
829 +
830 +If (% style="color:#037691" %)**keep time > 0**(%%), device will monitor the keep status event and send an alarm when status doesn't change after timeout.
831 +
832 +
833 +* (((
834 +(% style="color:blue" %)**Downlink Command**
817 817  )))
818 818  
819 -(((
820 -AA: Command Type Code
837 +(% style="color:#037691" %)**Command: 0xA9 aa bb cc dd**
838 +
839 +**A9:** Command Type Code
840 +
841 +**aa: **01:TTRIG1; 02:TTRIG2
842 +
843 +**bb:** status to be monitored
844 +
845 +**cc dd:** timeout.
846 +
847 +
848 +**1) AT+TTRIG1 : (PA8 of pin)**
849 +
850 +(% style="color:blue" %)**AT Command to configure:**
851 +
852 +* (((
853 +(% style="color:#037691" %)**AT+TTRIG1=1,30** (%%) **~-~->** When the **Keep Status** change from close to open, and device remains in open status for more than 30 seconds. DS03A-LB will send an uplink packet, the Alarm1 bit(the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
854 +
855 +(% style="color:#037691" %)**AT+TTRIG1=0,30** (%%) **~-~->** When the **Keep Status** change from open to close, and device remains in open status for more than 30 seconds. DS03A-LB will send an uplink packet, the Alarm1 bit (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
821 821  )))
822 822  
823 -(((
824 -aa: Stop duration
858 +* (((
859 +(% style="color:#037691" %)**AT+TTRIG1=0,0**  (%%) **~-~-> ** Default Value, disable timeout Alarm.
860 +
861 +
862 +
825 825  )))
826 826  
827 -(((
828 -bb cc: Alarm Timer
865 +(% style="color:blue" %)**Downlink Command to configure:**
866 +
867 +If user send 0xA9 01 01 00 1E: equal to AT+TTRIG1=1,30 **or** 0xA9 01 00 00 00: Equal to AT+TTRIG1=0,0.
868 +
869 +
870 +**2) AT+TTRIG2 : (PA4 of pin,need to use AT+TTRCHANNEL=2)**
871 +
872 +(% style="color:blue" %)**AT Command to configure:**
873 +
874 +* (((
875 +(% style="color:#037691" %)**AT+TTRIG2=1,30** (%%) **~-~->** When the **Keep Status** change from close to open, and device remains in open status for more than 30 seconds. DS03A-LB will send an uplink packet, the Alarm2 bit (the second bit of 12^^st^^ byte of payload) on this uplink packet is set to 1.
876 +
877 +(% style="color:#037691" %)**AT+TTRIG2=0,30** (%%) **~-~->** When the **Keep Status** change from open to close, and device remains in open status for more than 30 seconds. DS03A-LB will send an uplink packet, the Alarm2 bit (the second bit of 12^^st^^ byte of payload) on this uplink packet is set to 1.
829 829  )))
830 830  
831 -(((
832 -If user send 0xAA 0F 00 03: equal to AT+PTRIG=15,3
880 +* (((
881 +(% style="color:#037691" %)**AT+TTRIG2=0,0**  (%%) **~-~-> ** Default Value, disable timeout Alarm.
882 +
883 +
884 +
833 833  )))
834 834  
887 +(% style="color:blue" %)**Downlink Command to configure:**
835 835  
836 -== 2.8 Set the calculate flag ==
889 +If user send 0xA9 02 00 00 1E: equal to AT+TTRIG2=0,30  **or**  0xA9 02 00 00 00: Equal to AT+TTRIG2=0,0.
837 837  
838 838  
839 -Feature: Set the calculate flag
892 +=== 3.3.5  TTRIG1 & TTRIG2 timeout status alarm ===
840 840  
841 -(% style="color:blue" %)**AT Command: AT+CALCFLAG**
842 842  
843 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:461px" %)
844 -|=(% style="width: 158px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 193px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 110px;background-color:#4F81BD;color:white" %)**Response**
845 -|(% style="width:158px" %)AT+CALCFLAG =1|(% style="width:192px" %)Set the calculate flag to 1.|(% style="width:109px" %)OK
846 -|(% style="width:158px" %)AT+CALCFLAG =2|(% style="width:192px" %)Set the calculate flag to 2.|(% style="width:109px" %)OK
895 +It needs to be used with AT+TTRIG1 or AT+TTRIG2. When TTRIG1 or TTRIG2 times out and causes an alarm, and the status does not change subsequently, an alarm packet will be sent at the alarm interval.
847 847  
897 +(% style="color:blue" %)**AT Command:**
898 +
899 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
900 +|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 279px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 76px;background-color:#D9E2F3;color:#0070C0" %)**Response**
901 +|(% style="width:155px" %)(((
902 +AT+TTRALARM=0
903 +)))|(% style="width:279px" %)(((
904 +disable continuous alarm
905 +)))|(% style="width:84px" %)(((
906 +OK
907 +)))
908 +|(% style="width:155px" %)(((
909 +AT+TTRALARM=60
910 +)))|(% style="width:279px" %)(((
911 +The alarm interval is 60 minutes (unit: minutes)
912 +)))|(% style="width:84px" %)(((
913 +OK
914 +)))
915 +
848 848  (% style="color:blue" %)**Downlink Command:**
849 849  
850 -* **Example**: 0XA501  ~/~/  Same as AT+CALCFLAG =1
918 +Example:  0C aa  => AT+TTRALARM= aa
851 851  
852 -== 2.9 Set count number ==
853 853  
921 +=== 3.3.6  Count Mod ===
854 854  
855 -Feature: Manually set the count number
856 856  
857 -(% style="color:blue" %)**AT Command: AT+SETCNT**
924 +Feature: Manually set the count mode.
858 858  
859 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:479px" %)
860 -|=(% style="width: 160px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 223px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 96px;background-color:#4F81BD;color:white" %)**Response**
861 -|(% style="width:160px" %)AT+ SETCNT =0|(% style="width:221px" %)Set the count number to 0.|(% style="width:95px" %)OK
862 -|(% style="width:160px" %)AT+ SETCNT =100|(% style="width:221px" %)Set the count number to 100.|(% style="width:95px" %)OK
926 +(% style="color:blue" %)**AT Command:**
863 863  
928 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
929 +|=(% style="width: 154px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 275px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 86px;background-color:#D9E2F3;color:#0070C0" %)**Response**
930 +|(% style="width:155px" %)(((
931 +AT+COUNTMOD=0
932 +)))|(% style="width:277px" %)(((
933 +the count value keeps accumulating mode
934 +)))|(% style="width:86px" %)(((
935 +OK
936 +)))
937 +|(% style="width:155px" %)(((
938 +AT+COUNTMOD=1
939 +)))|(% style="width:277px" %)(((
940 +the count value will be reset after each TDC time(Last Close Duration Reset after each uplink)
941 +)))|(% style="width:86px" %)(((
942 +OK
943 +)))
944 +
864 864  (% style="color:blue" %)**Downlink Command:**
865 865  
866 -* **Example**: 0xA6000001  ~/~/  Same as AT+ SETCNT =1
947 +Example:  0B aa  => AT+COUNTMOD = second byte
867 867  
868 -* **Example**: 0xA6000064  ~/~/  Same as AT+ SETCNT =100
869 869  
870 -== 2.10 Set Transmit Interval Time ==
950 +=== 3.3.7  Number of channel of door sensors ===
871 871  
872 872  
873 -(((
874 -Feature: Change NB-IoT End Node Transmit Interval.
875 -)))
953 +Feature: Set the number of door sensor channels.
876 876  
877 -(((
878 -(% style="color:blue" %)**AT Command: AT+TDC**
879 -)))
955 +(% style="color:blue" %)**AT Command:**
880 880  
881 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
882 -|=(% style="width: 156px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 137px;background-color:#4F81BD;color:white" %)**Function**|=(% style="background-color:#4F81BD;color:white" %)**Response**
883 -|(% style="width:156px" %)AT+TDC=?|(% style="width:137px" %)Show current transmit Interval|(((
884 -30000
957 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)
958 +|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 288px; background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
959 +|(% style="width:155px" %)(((
960 +AT+TTRCHANNEL=1
961 +)))|(% style="width:259px" %)(((
962 +Set as single channel, only use PA8 pin as interrupt pin.
963 +)))|(% style="width:44px" %)(((
885 885  OK
886 -the interval is 30000ms = 30s
887 887  )))
888 -|(% style="width:156px" %)AT+TDC=60000|(% style="width:137px" %)Set Transmit Interval|(((
966 +|(% style="width:155px" %)(((
967 +AT+TTRCHANNEL=2
968 +)))|(% style="width:259px" %)(((
969 +Set as dual channel, use PA8 pin and PA4 pin as interrupt pin.
970 +)))|(% style="width:44px" %)(((
889 889  OK
890 -Set transmit interval to 60000ms = 60 seconds
891 891  )))
892 892  
893 -(((
894 -(% style="color:blue" %)**Downlink Command: 0x01**
895 -)))
974 +(% style="color:blue" %)**Downlink Command:**
896 896  
897 -(((
898 -Format: Command Code (0x01) followed by 3 bytes time value.
976 +Example:  0D aa => AT+TTRCHANNEL = second byte
977 +
978 +
979 +=== 3.3.8  Set Time Sync Mode ===
980 +
981 +
982 +Feature: Enable/Disable Sync system time via LoRaWAN MAC Command (DeviceTimeReq), LoRaWAN server must support v1.0.3 protocol to reply to this command.
983 +
984 +SYNCMOD is set to 1 by default. If user wants to set a different time from the LoRaWAN server, the user needs to set this to 0.
985 +
986 +(% style="color:blue" %)**AT Command:**
987 +
988 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)
989 +|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 288px; background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
990 +|(% style="width:155px" %)(((
991 +AT+SYNCMOD=1
992 +)))|(% style="width:259px" %)(((
993 +Enable Sync system time via LoRaWAN MAC Command (DeviceTimeReq) The default is zero time zone.
994 +)))|(% style="width:44px" %)(((
995 +OK
899 899  )))
997 +|(% style="width:155px" %)(((
998 +AT+SYNCMOD=1,8
999 +)))|(% style="width:259px" %)(((
1000 +Enable Sync system time via LoRaWAN MAC Command (DeviceTimeReq) Set to East eight time zone.
1001 +)))|(% style="width:44px" %)(((
1002 +OK
1003 +)))
1004 +|(% style="width:155px" %)AT+SYNCMOD=1,-12|(% style="width:259px" %)Enable Sync system time via LoRaWAN MAC Command (DeviceTimeReq) Set to West Twelve Time Zone.|(% style="width:44px" %)OK
900 900  
901 -(((
902 -If the downlink payload=0100003C, it means set the END Node's Transmit Interval to 0x00003C=60(S), while type code is 01.
1006 +(% style="color:blue" %)**Downlink Command:**
1007 +
1008 +0x28 01  ~/~/ Same As AT+SYNCMOD=1
1009 +
1010 +0x28 01 08  ~/~/ Same As AT+SYNCMOD=1,8
1011 +
1012 +0x28 01 F4  ~/~/ Same As AT+SYNCMOD=1,-12
1013 +
1014 +0x28 00  ~/~/ Same As AT+SYNCMOD=0
1015 +
1016 +
1017 +=== 3.3.9  Clear the open door times and the duration of the last open door ===
1018 +
1019 +
1020 +(% style="color:blue" %)**AT Command:**
1021 +
1022 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
1023 +|=(% style="width: 163px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 290px; background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1024 +|(% style="width:155px" %)AT+CLRC|(% style="width:259px" %)clear the open door times and the duration of the last open door.|(% style="width:44px" %)(((
1025 +OK
903 903  )))
904 904  
905 -* (((
906 -Example 1: Downlink Payload: 0100001E  ~/~/ Set Transmit Interval (TDC) = 30 seconds
1028 +(% style="color:blue" %)**Downlink Command:**(%%)0xA6 01
1029 +
1030 +The sensor will clear the open door times and the duration of the last open door.
1031 +
1032 +
1033 +=== 3.3.10  Set the count value of the number of open door ===
1034 +
1035 +
1036 +(% style="color:blue" %)**AT Command:**
1037 +
1038 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)
1039 +|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 288px; background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1040 +|(% style="width:155px" %)(((
1041 +AT+SETCNT=1,100
1042 +)))|(% style="width:259px" %)(((
1043 +Set the open door times of PA8 pin to 100 times.
1044 +)))|(% style="width:44px" %)(((
1045 +OK
907 907  )))
908 -* (((
909 -Example 2: Downlink Payload: 0100003C  ~/~/ Set Transmit Interval (TDC) = 60 seconds
1047 +|(% style="width:155px" %)AT+SETCNT=1,0|(% style="width:259px" %)Clear the open door times of PA8 pin.|(% style="width:44px" %)OK
1048 +|(% style="width:155px" %)(((
1049 +AT+SETCNT=2,50
1050 +)))|(% style="width:259px" %)(((
1051 +Set the open door times of PA4 pin to 100 times.
1052 +)))|(% style="width:44px" %)(((
1053 +OK
910 910  )))
911 911  
912 -= 3. Configure SW3L-NB =
1056 +(% style="color:blue" %)**Downlink Command:**
913 913  
1058 +0xA6 01 00 00 64  ==>  AT+SETCNT=1,100
1059 +
1060 +0xA6 01 00 00 00  ==>  AT+SETCNT=1,0
1061 +
1062 +0xA6 02 00 00 32  ==>  AT+SETCNT=2,50
1063 +
1064 +
1065 += 3. Configure DS03A-NB =
1066 +
914 914  == 3.1 Configure Methods ==
915 915  
916 916  
917 -SW3L-NB supports below configure method:
1070 +DS03A-NB supports below configure method:
918 918  
919 919  * AT Command via Bluetooth Connection (**Recommended**): [[BLE Configure Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
920 920  
... ... @@ -1003,7 +1003,7 @@
1003 1003  = 4. Battery & Power Consumption =
1004 1004  
1005 1005  
1006 -SW3L-NB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
1159 +DS03A-NB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
1007 1007  
1008 1008  [[**Battery Info & Power Consumption Analyze**>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
1009 1009  
... ... @@ -1038,7 +1038,7 @@
1038 1038  = 7. Order Info =
1039 1039  
1040 1040  
1041 -Part Number: (% style="color:blue" %)**SW3L-NB-XX-YY**
1194 +Part Number: (% style="color:blue" %)**DS03A-NB-XX**
1042 1042  
1043 1043  (% style="color:red" %)**XX**(%%):
1044 1044  
... ... @@ -1048,43 +1048,14 @@
1048 1048  
1049 1049  (% style="color:#037691" %)**1NCE SIM Card NB-IoT network coverage**(%%): Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Finland, Germany, Great Britain, Greece, Hungary, Ireland, Italy, Latvia, Malta, Netherlands, Norway, Puerto Rico, Russia, Slovak , Republic, Slovenia, Spain, Sweden, Switzerland, Taiwan, USA, US Virgin Islands
1050 1050  
1051 -(((
1052 -(% style="color:blue" %)**YY**(%%): Flow Sensor Model:
1053 -)))
1054 1054  
1055 -(((
1056 - **004:** DW-004 Flow Sensor: diameter: G1/2” / DN15.  450 pulse = 1 L
1057 -)))
1058 1058  
1059 -(((
1060 - **006:** DW-006 Flow Sensor: diameter: G3/4” / DN20. 390 pulse = 1 L
1061 -)))
1062 -
1063 -(((
1064 - **010:** DW-010 Flow Sensor: diameter: G 1” / DN25. 64 pulse = 1 L
1065 -)))
1066 -
1067 -* (((
1068 -calculate flag=0: for SW3L-004 Flow Sensor: 450 pulse = 1 L
1069 -)))
1070 -
1071 -* (((
1072 -calculate flag=1: for SW3L-006 Flow Sensor: 390 pulse = 1 L
1073 -)))
1074 -
1075 -* (((
1076 -calculate flag=2: for SW3L-010 Flow Sensor: 64  pulse = 1 L
1077 -
1078 -
1079 -
1080 -)))
1081 -
1082 1082  = 8. ​Packing Info =
1083 1083  
1084 1084  
1085 1085  (% style="color:#037691" %)**Package Includes**:
1086 1086  
1087 -* SW3L-NB NB-IoT Distance Detection sensor x 1
1211 +* DS03A-NB NB-IoT Door sensor x 1
1088 1088  
1089 1089  * External antenna x 1
1090 1090  
image-20231011092549-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +548.0 KB
Content
image-20231011092656-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +548.0 KB
Content
image-20231011092728-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +245.9 KB
Content
image-20231011092834-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +550.2 KB
Content
image-20231011093014-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +249.4 KB
Content
image-20231011093807-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +196.7 KB
Content