Version 89.1 by Mengting Qiu on 2023/09/20 17:50

Show last authors
1 (% style="text-align:center" %)
2 [[image:image-20230912085600-1.png||height="519" width="731"]]
3
4
5
6
7
8
9
10
11
12 **Table of Contents:**
13
14 {{toc/}}
15
16
17
18
19
20
21 = 1. Introduction =
22
23 == 1.1 What is DDS45-NB NB-IoT Distance Detection Sensor ==
24
25
26 The Dragino DDS45-NB is a (% style="color:blue" %)** NB-IoT Distance Detection Sensor**(%%) for Internet of Things solution. It is used to measure the distance between the sensor and a flat object. The distance detection sensor is a module that uses (% style="color:blue" %)** ultrasonic sensing technology**(%%) for distance measurement, and (% style="color:blue" %)** temperature compensation**(%%) is performed internally to improve the reliability of data. The DDS45-NB can be applied to scenarios such as horizontal distance measurement, liquid level measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, bottom water level monitoring, etc.
27
28 It detects the distance (% style="color:blue" %)** between the measured object and the sensor**(%%), and and send IoT platform via NB-IoT network.
29
30 DDS45-NB supports different uplink methods including (% style="color:blue" %)**MQTT, MQTTs, UDP & TCP**(%%) for different application requirement, and support uplinks to various IoT Servers.
31
32 DDS45-NB (% style="color:blue" %)**supports BLE configure **(%%)and(% style="color:blue" %)** OTA update**(%%) which make user easy to use.
33
34 DDS45-NB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long-term use up to severa years.
35
36 DDS45-NB has optional built-in SIM card and default IoT server connection version. Which makes it works with simple configuration.
37
38 [[image:image-20230912102813-2.png||height="320" width="923"]]
39
40
41 == 1.2 ​Features ==
42
43
44 * NB-IoT Bands: B1/B2/B3/B4/B5/B8/B12/B13/B17/B18/B19/B20/B25/B28/B66/B70/B85 @H-FDD
45 * Ultra-low power consumption
46 * Distance Detection by Ultrasonic technology
47 * Flat object range 30mm - 4500mm
48 * Accuracy: ±(1cm+S*0.3%) (S: Distance)
49 * Measure Angle: 60°
50 * Multiply Sampling and one uplink
51 * Support Bluetooth v5.1 remote configure and update firmware
52 * Uplink on periodically
53 * Downlink to change configure
54 * IP66 Waterproof Enclosure
55 * 8500mAh Battery for long term use
56 * Nano SIM card slot for NB-IoT SIM
57
58 == 1.3 Specification ==
59
60
61 (% style="color:blue" %)**Common DC Characteristics:**
62
63 * Supply Voltage: 2.5v ~~ 3.6v
64 * Operating Temperature: -40 ~~ 85°C
65
66 (% style="color:blue" %)**NB-IoT Spec:**
67
68 (% style="color:#037691" %)**NB-IoT Module: BC660K-GL**
69
70 (% style="color:#037691" %)**Support Bands:**
71
72 * B1 @H-FDD: 2100MHz
73 * B2 @H-FDD: 1900MHz
74 * B3 @H-FDD: 1800MHz
75 * B4 @H-FDD: 2100MHz
76 * B5 @H-FDD: 860MHz
77 * B8 @H-FDD: 900MHz
78 * B12 @H-FDD: 720MHz
79 * B13 @H-FDD: 740MHz
80 * B17 @H-FDD: 730MHz
81 * B18 @H-FDD: 870MHz
82 * B19 @H-FDD: 870MHz
83 * B20 @H-FDD: 790MHz
84 * B25 @H-FDD: 1900MHz
85 * B28 @H-FDD: 750MHz
86 * B66 @H-FDD: 2000MHz
87 * B70 @H-FDD: 2000MHz
88 * B85 @H-FDD: 700MHz
89
90 (% style="color:blue" %)**Battery:**
91
92 * Li/SOCI2 un-chargeable battery
93 * Capacity: 8500mAh
94 * Self Discharge: <1% / Year @ 25°C
95 * Max continuously current: 130mA
96 * Max boost current: 2A, 1 second
97
98 (% style="color:blue" %)**Power Consumption**
99
100 * STOP Mode: 10uA @ 3.3v
101 * Max transmit power: 350mA@3.3v
102
103 == 1.4 Rated environmental conditions ==
104
105
106 (% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)
107 |(% style="background-color:#4f81bd; color:white; width:163px" %)**Item**|(% style="background-color:#4f81bd; color:white; width:90px" %)**Minimum value**|(% style="background-color:#4f81bd; color:white; width:70px" %)**Typical value**|(% style="background-color:#4f81bd; color:white; width:87px" %)**Maximum value**|(% style="background-color:#4f81bd; color:white; width:40px" %)**Unit**|(% style="background-color:#4f81bd; color:white; width:50px" %)**Remarks**
108 |(% style="width:174px" %)Storage temperature|(% style="width:86px" %)-25|(% style="width:66px" %)25|(% style="width:90px" %)80|(% style="width:48px" %)℃|(% style="width:203px" %)
109 |(% style="width:174px" %)Storage humidity|(% style="width:86px" %) |(% style="width:66px" %)65%|(% style="width:90px" %)90%|(% style="width:48px" %)RH|(% style="width:203px" %)(1)
110 |(% style="width:174px" %)Operating temperature|(% style="width:86px" %)-15|(% style="width:66px" %)25|(% style="width:90px" %)60|(% style="width:48px" %)℃|(% style="width:203px" %)
111 |(% style="width:174px" %)Working humidity|(% style="width:86px" %)(((
112
113
114
115 )))|(% style="width:66px" %)65%|(% style="width:90px" %)80%|(% style="width:48px" %)RH|(% style="width:203px" %)(1)
116
117 (((
118 (% style="color:red" %)**Remarks: (1) a. When the ambient temperature is 0-39 ℃, the maximum humidity is 90% (non-condensing);       **
119
120 (% style="color:red" %)** b. When the ambient temperature is 40-50 ℃, the highest humidity is the highest humidity in the natural world at the current temperature (no condensation)**
121
122
123 )))
124
125 == 1.5 Effective measurement range Reference beam pattern ==
126
127
128 (% style="color:blue" %)**1. The tested object is a white cylindrical tube made of PVC, with a height of 100cm and a diameter of 7.5cm.**
129
130 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654852253176-749.png?rev=1.1||alt="1654852253176-749.png"]]
131
132
133 (% style="color:blue" %)**2. The object to be tested is a "corrugated cardboard box" perpendicular to the central axis of 0 °, and the length * width is 60cm * 50cm.**
134
135 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654852175653-550.png?rev=1.1||alt="1654852175653-550.png"]]
136
137
138 == 1.6 Applications ==
139
140
141 * Horizontal distance measurement
142 * Liquid level measurement
143 * Parking management system
144 * Object proximity and presence detection
145 * Intelligent trash can management system
146 * Robot obstacle avoidance
147 * Automatic control
148 * Sewer
149 * Bottom water level monitoring
150
151 == 1.7 Sleep mode and working mode ==
152
153
154 (% style="color:blue" %)**Deep Sleep Mode: **(%%)Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.
155
156 (% style="color:blue" %)**Working Mode:** (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
157
158
159 == 1.8 Button & LEDs ==
160
161
162 [[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675071855856-879.png]]
163
164
165 (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
166 |=(% style="width: 167px;background-color:#4F81BD;color:white" %)**Behavior on ACT**|=(% style="width: 117px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width:225px;background-color:#4F81BD;color:white" %)**Action**
167 |(% style="width:167px" %)Pressing ACT between 1s < time < 3s|(% style="width:117px" %)Send an uplink|(% style="width:225px" %)(((
168 If sensor has already attached to NB-IoT network, sensor will send an uplink packet, (% style="color:blue" %)**blue led** (%%)will blink once.
169 Meanwhile, BLE module will be active and user can connect via BLE to configure device.
170 )))
171 |(% style="width:167px" %)Pressing ACT for more than 3s|(% style="width:117px" %)Active Device|(% style="width:225px" %)(((
172 (% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:#037691" %)**OTA mode**(%%) for 3 seconds. And then start to attach NB-IoT network.
173 (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
174 Once sensor is active, BLE module will be active and user can connect via BLE to configure device, no matter if device attach NB-IoT network or not.
175 )))
176 |(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means device is in Deep Sleep Mode.
177
178 == 1.9 BLE connection ==
179
180
181 DDS45-NB support BLE remote configure and firmware update.
182
183
184 BLE can be used to configure the parameter of sensor or see the console output from sensor. BLE will be only activate on below case:
185
186 * Press button to send an uplink
187 * Press button to active device.
188 * Device Power on or reset.
189
190 If there is no activity connection on BLE in 60 seconds, sensor will shut down BLE module to enter low power mode.
191
192
193 == 1.10 Pin Definitions & Switch ==
194
195
196 [[image:image-20230819104805-5.png]]
197
198
199 === 1.10.1 Jumper JP2 ===
200
201
202 Power on Device when put this jumper.
203
204
205 === 1.10.2 BOOT MODE / SW1 ===
206
207
208 **1)** (% style="color:blue" %)**ISP**(%%): upgrade mode, device won't have any signal in this mode. but ready for upgrade firmware. LED won't work. Firmware won't run.
209
210 **2)** (% style="color:blue" %)**Flash**(%%): work mode, device starts to work and send out console output for further debug
211
212
213 === 1.10.3 Reset Button ===
214
215
216 Press to reboot the device.
217
218 (% style="display:none" %)
219
220
221 == 1.11 Mechanical ==
222
223 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual/WebHome/1675143884058-338.png?rev=1.1||alt="1675143884058-338.png"]]
224
225 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual/WebHome/1675143899218-599.png?rev=1.1||alt="1675143899218-599.png"]]
226
227 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual/WebHome/1675143909447-639.png?rev=1.1||alt="1675143909447-639.png"]]
228
229
230 (% style="color:blue" %)**Probe Mechanical:**
231
232 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS45%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654915562090-396.png?rev=1.1||alt="1654915562090-396.png"]]
233
234
235
236 = 2. Use DDS45-NB to communicate with IoT Server =
237
238 == 2.1 Send data to IoT server via NB-IoT network ==
239
240
241 The DDS45-NB is equipped with a NB-IoT module, the pre-loaded firmware in DDS45-NB will get environment data from sensors and send the value to local NB-IoT network via the NB-IoT module.  The NB-IoT network will forward this value to IoT server via the protocol defined by DDS45-NB.
242
243
244 Below shows the network structure:
245
246 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/DDS45-NB_NB-IoT_Distance_Detection_Sensor_User_Manual/WebHome/image-20230912102813-2.png?width=923&height=320&rev=1.1||alt="image-20230912102813-2.png"]]
247
248
249 There are two version: (% style="color:blue" %)**-GE**(%%) and (% style="color:blue" %)**-1D**(%%) version of DDS45-NB.
250
251
252 (% style="color:blue" %)**GE Version**(%%): This version doesn't include SIM card or point to any IoT server. User needs to use AT Commands to configure below two steps to set DDS45-NB send data to IoT server.
253
254 * Install NB-IoT SIM card and configure APN. See instruction of [[Attach Network>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H2.AttachNetwork]].
255
256 * Set up sensor to point to IoT Server. See instruction of [[Configure to Connect Different Servers>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.Configuretoconnecttodifferentservers]]. 
257
258 Below shows result of different server as a glance.
259
260 (% border="1" cellspacing="4" style="width:515px" %)
261 |(% style="background-color:#4f81bd; color:white; width:100px" %)**Servers**|(% style="background-color:#4f81bd; color:white; width:300px" %)**Dash Board**|(% style="background-color:#4f81bd; color:white; width:115px" %)**Comments**
262 |(% style="width:127px" %)[[Node-Red>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.5A0Node-RedA028viaA0MQTT29]]|(% style="width:385px" %)(((
263 (% style="text-align:center" %)
264 [[image:image-20230819113244-8.png||height="183" width="367"]]
265 )))|(% style="width:170px" %)
266 |(% style="width:127px" %)[[DataCake>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.4Datacake]]|(% style="width:385px" %)(((
267 (% style="text-align:center" %)
268 [[image:image-20230819113244-9.png||height="119" width="367"]]
269 )))|(% style="width:170px" %)
270 |(% style="width:127px" %)[[Tago.IO>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.7A0Tago.ioA028viaA0MQTT29]]|(% style="width:385px" %) |(% style="width:170px" %)
271 |(% style="width:127px" %)[[General UDP>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.1GeneralA0UDPA0Connection]]|(% style="width:385px" %)Raw Payload. Need Developer to design Dash Board|(% style="width:170px" %)
272 |(% style="width:127px" %)[[General MQTT>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.2GeneralA0MQTTA0Connection]]|(% style="width:385px" %)Raw Payload. Need Developer to design Dash Board|(% style="width:170px" %)
273 |(% style="width:127px" %)[[ThingSpeak>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.3A0ThingSpeakA028viaA0MQTT29]]|(% style="width:385px" %)(((
274 (% style="text-align:center" %)
275 [[image:image-20230819113244-10.png||height="104" width="367"]]
276 )))|(% style="width:170px" %)
277 |(% style="width:127px" %)[[ThingsBoard>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.6A0ThingsBoard.CloudA028viaA0MQTT29]]|(% style="width:385px" %)(((
278 (% style="text-align:center" %)
279 [[image:image-20230819113244-11.png||height="141" width="367"]]
280 )))|(% style="width:170px" %)
281
282 (% style="color:blue" %)**1D Version**(%%): This version has 1NCE SIM card pre-installed and configure to send value to DataCake. User Just need to select the sensor type in DataCake and Activate DDS45-NB and user will be able to see data in DataCake. See here for [[DataCake Config Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.4Datacake]].
283
284
285 == 2.2 ​Payload Types ==
286
287
288 To meet different server requirement, DDS45-NB supports different payload type.
289
290 **Includes:**
291
292 * [[General JSON format payload>>||anchor="H2.2.1GeneralJsonFormat28Type3D529"]]. (Type=5)
293
294 * [[HEX format Payload>>||anchor="H2.2.2HEXformatPayload28Type3D029"]]. (Type=0)
295
296 * [[ThingSpeak Format>>||anchor="H2.2.4ThingSpeakPayload28Type3D129"]]. (Type=1)
297
298 * [[ThingsBoard Format>>||anchor="H2.2.3ThingsBoardPayload28Type3D329"]]. (Type=3)
299
300 User can specify the payload type when choose the connection protocol. Example:
301
302 (% style="color:#037691" %)**AT+PRO=2,0**  (%%) ~/~/ Use UDP Connection & hex Payload
303
304 (% style="color:#037691" %)**AT+PRO=2,5**   (%%) ~/~/ Use UDP Connection & Json Payload
305
306 (% style="color:#037691" %)**AT+PRO=3,5 ** (%%) ~/~/ Use MQTT Connection & Json Payload
307
308
309 === 2.2.1 General Json Format(Type~=5) ===
310
311
312 This is the General Json Format. As below:
313
314 (% style="color:#4472c4" %)**{"IMEI":866207053462762,"temperature":29.2,"humidity":54.2,"battery":3.27,"signal":24,"Model":DDS45-NB, "1":{28.2,48.3,2023/08/10 08:00:37},"2":{28.1,49.1,2023/08/10 07:57:37},"3":{28.1,48.5,2023/08/10 07:54:37},"4":{28.2,48.6,2023/08/10 07:51:37},"5":{28.1,48.9,2023/08/10 07:48:37},"6":{28.2,48.8,2023/08/10 07:45:37},"7":{28.2,48.8,2023/08/10 07:42:37},"8":{28.0,48.8,2023/08/10 07:39:37}}**
315
316
317 (% style="color:red" %)**Notice, from above payload:**
318
319 * Temperature , Humidity , Battery & Signal are the value at uplink time.
320
321 * Json entry 1 ~~ 8 are the last 1 ~~ 8 sampling data as specify by (% style="color:#037691" %)**AT+NOUD=8 ** (%%)Command. Each entry includes (from left to right): Temperature, Humidity, Sampling time.
322
323 === 2.2.2 HEX format Payload(Type~=0) ===
324
325
326 This is the HEX Format. As below:
327
328 (% style="color:#4472c4" %)**f8662070583784430b640dda15010003a4650abc400000650ab8180000650ab4940000650ab10f0000650aad8b0000650aaa070000650aa6840000650aa3000000650a9308**
329
330 [[image:image-20230920172200-1.png||height="198" width="1085"]]
331
332
333 If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the NB sensor uplink data.
334
335 [[image:image-20230920173352-2.png||height="700" width="1012"]]
336
337
338 (% style="color:blue" %)**Version:**
339
340 These bytes include the hardware and software version.
341
342 (% style="color:#037691" %)**Higher byte:**(%%) Specify Sensor Model: 0x0b for DDS45-NB
343
344 (% style="color:#037691" %)**Lower byte:**(%%) Specify the software version: 0x64=100, means firmware version 1.0.0
345
346
347 (% style="color:blue" %)**BAT (Battery Info):**
348
349 Ex1: 0x0dda = 3546mV
350
351
352 (% style="color:blue" %)**Signal Strength:**
353
354 NB-IoT Network signal Strength.
355
356 **Ex1: 0x15 = 21**
357
358 **0**  -113dBm or less
359
360 **1**  -111dBm
361
362 **2...30** -109dBm... -53dBm
363
364 **31**   -51dBm or greater
365
366 **99**    Not known or not detectable
367
368
369 (% style="color:blue" %)**Distance:  **
370
371 Ex1: 0x03a4 = 932 mm
372
373
374 (% style="color:blue" %)**Timestamp:   **
375
376 Unit Timestamp Example: 650abc40(H) = 1695202368(D)
377
378 Put the decimal value into this link([[https:~~/~~/www.epochconverter.com)>>https://www.epochconverter.com]]) to get the time.
379
380
381 === 2.2.3 ThingsBoard Payload(Type~=3) ===
382
383
384 Type3 payload special design for ThingsBoard, it will also configure other default server to ThingsBoard.
385
386 (% style="color:#4472c4" %)**{"IMEI":866207053462762,"temperature":29.2,"humidity":54.2,"battery":3.27,"signal":24}**
387
388
389 === 2.2.4 ThingSpeak Payload(Type~=1) ===
390
391
392 This payload meets ThingSpeak platform requirement. It includes only four fields. Form 1~~4 are:
393
394 Temperature, Humidity, Battery & Signal. This payload type only valid for ThingsSpeak Platform
395
396 As below:
397
398 (% style="color:#4472c4" %)**field1=27.9&field2=49.9&field3=3.23&field4=28**
399
400
401 == 2.3  ​Uplink Payload ==
402
403
404 (((
405 DDS45-NB will uplink payload via LoRaWAN with below payload format: 
406 )))
407
408 (((
409 Uplink payload includes in total 8 bytes.
410 )))
411
412 (% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
413 |=(% style="width: 95px; background-color:#4F81BD;color:white" %)Size(bytes)|=(% style="width: 61px; background-color:#4F81BD;color:white" %)2|=(% style="background-color:#4F81BD;color:white" %)2|=(% style="background-color:#4F81BD;color:white" %)1|=(% style="background-color:#4F81BD;color:white" %)2|=(% style="background-color:#4F81BD;color:white" %)1
414 |(% style="width:95px" %)Value|(% style="width:61px" %)[[BAT>>||anchor="H2.3.1A0BatteryInfo"]]|(((
415 [[Distance>>||anchor="H2.3.2A0Distance"]]
416 (unit: mm)
417 )))|[[Digital Interrupt (Optional)>>||anchor="H2.3.3A0InterruptPin"]]|(((
418 [[Temperature (Optional)>>||anchor="H2.3.4A0DS18B20Temperaturesensor"]]
419 )))|[[Sensor Flag>>||anchor="H2.3.5A0SensorFlag"]]
420
421 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/DDS20-LB_LoRaWAN_Ultrasonic_Liquid_Level_Sensor_User_Manual/WebHome/%E5%BE%AE%E4%BF%A1%E6%88%AA%E5%9B%BE_20230702135733.png?width=964&height=215&rev=1.1||alt="微信截图_20230702135733.png"]]
422
423
424 === 2.3.1  Battery Info ===
425
426
427 Check the battery voltage for DDS45-NB.
428
429 Ex1: 0x0B45 = 2885mV
430
431 Ex2: 0x0B49 = 2889mV
432
433
434 === 2.3.2  Distance ===
435
436
437 (((
438 Get the distance. Flat object range 30mm - 4500mm.
439 )))
440
441 (((
442 For example, if the data you get from the register is **0x0B 0x05**, the distance between the sensor and the measured object is(% style="color:#4472c4" %)** **
443
444 (% style="color:blue" %)**0B05(H) = 2821 (D) = 2821 mm.**
445 )))
446
447 * If the sensor value is 0x0000, it means system doesn't detect ultrasonic sensor.
448
449 * If the sensor value lower than 0x001E (30mm), the sensor value will be 0x00.
450
451 === 2.3.3  Interrupt Pin ===
452
453
454 This data field shows if this packet is generated by interrupt or not.
455
456 **Example:**
457
458 0x00: Normal uplink packet.
459
460 0x01: Interrupt Uplink Packet.
461
462
463 === 2.3.4  DS18B20 Temperature sensor ===
464
465
466 This is optional, user can connect external DS18B20 sensor to the +3.3v, 1-wire and GND pin . and this field will report temperature.
467
468 **Example**:
469
470 If payload is: 0105H:  (0105 & FC00 == 0), temp = 0105H /10 = 26.1 degree
471
472 If payload is: FF3FH :  (FF3F & FC00 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
473
474
475 === 2.3.5  Sensor Flag ===
476
477
478 (((
479 0x01: Detect Ultrasonic Sensor
480 )))
481
482 (((
483 0x00: No Ultrasonic Sensor
484
485
486 )))
487
488 == 2.4 Test Uplink and Change Update Interval ==
489
490
491 By default, Sensor will send uplinks (% style="color:blue" %)**every 2 hours**(%%) & AT+NOUD=8
492
493 User can use below commands to change the (% style="color:blue" %)**uplink interval**.
494
495 (% style="color:#037691" %)**AT+TDC=600 ** (%%) ~/~/ Set Update Interval to 600s
496
497 User can also push the button for more than 1 seconds to activate an uplink.
498
499
500 == 2.5 Multi-Samplings and One uplink ==
501
502
503 To save battery life, DDS45-NB will sample temperature & humidity data every 15 minutes and send one uplink every 2 hours. So each uplink it will include 8 stored data + 1 real-time data. They are defined by:
504
505 * (% style="color:#037691" %)**AT+TR=900**   (%%) ~/~/ The unit is seconds, and the default is to record data once every 900 seconds (15 minutes, the minimum can be set to 180 seconds)
506
507 * (% style="color:#037691" %)**AT+NOUD=8**     (%%)~/~/  The device uploads 8 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
508
509 The diagram below explains the relationship between TR, NOUD, and TDC more clearly:
510
511 [[image:1692424376354-959.png]]
512
513
514 == 2.6 Trggier an uplink by external interrupt ==
515
516
517 DDS45-NB has an external trigger interrupt function. Users can use the PB15 pin to trigger the upload of data packets.
518
519 (% style="color:blue" %)**AT command:**
520
521 * (% style="color:#037691" %)**AT+INTMOD **(%%) ~/~/ Set the trigger interrupt mode
522
523 * (% style="color:#037691" %)**AT+INTMOD=0 **(%%) ~/~/ Disable Interrupt
524
525 * (% style="color:#037691" %)**AT+INTMOD=1 **(%%) ~/~/ Trigger by rising and falling edge
526
527 * (% style="color:#037691" %)**AT+INTMOD=2 **(%%) ~/~/ Trigger by falling edge
528
529 * (% style="color:#037691" %)**AT+INTMOD=3  **(%%) ~/~/ Trigger by rising edge
530
531 = 3. Configure DDS45-NB =
532
533 == 3.1 Configure Methods ==
534
535
536 DDS45-NB supports below configure method:
537
538 * AT Command via Bluetooth Connection (**Recommended**): [[BLE Configure Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
539
540 * AT Command via UART Connection : See [[UART Connection>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H2.3UARTConnectionforSN50v3basemotherboard]].
541
542 == 3.2 AT Commands Set ==
543
544
545 AT+<CMD>?        : Help on <CMD>
546
547 AT+<CMD>         : Run <CMD>
548
549 AT+<CMD>=<value> : Set the value
550
551 AT+<CMD>=?       : Get the value
552
553
554 (% style="color:blue" %)**General Commands**      
555
556 AT                    : Attention       
557
558 AT?  : Short Help     
559
560 ATZ  : MCU Reset    
561
562 AT+TDC  : Application Data Transmission Interval
563
564 AT+CFG  : Print all configurations
565
566 AT+CFGMOD           : Working mode selection
567
568 AT+DEUI  : Get or set the Device ID
569
570 AT+INTMOD            : Set the trigger interrupt mode
571
572 AT+5VT           : Set extend the time of 5V power  
573
574 AT+PRO          : Choose agreement
575
576 AT+RXDL  : Extend the sending and receiving time
577
578 AT+DNSCFG  : Get or Set DNS Server
579
580 AT+GETSENSORVALUE   : Returns the current sensor measurement
581
582 AT+NOUD  : Get or Set the number of data to be uploaded
583
584 AT+CDP     : Read or Clear cached data
585
586 AT+SHTEMP:  Get or Set alarm of temp
587
588 AT+SHHUM:  Get or Set alarm of moisture
589
590 AT+SERVADDR :  Server Address
591
592
593 (% style="color:blue" %)**UDP Management**
594
595 AT+CFM  :  Upload confirmation mode (only valid for UDP)
596
597
598 (% style="color:blue" %)**MQTT Management**
599
600 AT+CLIENT               : Get or Set MQTT client
601
602 AT+UNAME              : Get or Set MQTT Username
603
604 AT+PWD                  : Get or Set MQTT password
605
606 AT+PUBTOPIC  : Get or Set MQTT publish topic
607
608 AT+SUBTOPIC  : Get or Set MQTT subscription topic
609
610
611 (% style="color:blue" %)**Information**          
612
613 AT+FDR  : Factory Data Reset
614
615 AT+PWORD  : Serial Access Password
616
617 AT+LDATA  : Get the last upload data
618
619 AT+CDP  : Read or Clear cached data
620
621
622 = 4. Battery & Power Consumption =
623
624
625 DDS45-NB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
626
627 [[**Battery Info & Power Consumption Analyze**>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
628
629
630 = 5. Firmware update =
631
632
633 User can change device firmware to::
634
635 * Update with new features.
636
637 * Fix bugs.
638
639 Firmware and changelog can be downloaded from : **[[Firmware download link>>https://www.dropbox.com/sh/l0bszumyrmil3yv/AAAg8LYGeAgDsD_ycCnweD72a?dl=0]]**
640
641 Methods to Update Firmware:
642
643 * (Recommended way) OTA firmware update via BLE: [[**Instruction**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/BLE_Firmware_Update_NB_Sensors_BC660K-GL/]].
644
645 * Update through UART TTL interface : **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
646
647 = 6. FAQ =
648
649 == 6.1 How can I access t BC660K-GL AT Commands? ==
650
651
652 User can access to BC660K-GL directly and send AT Commands.
653
654 [[See BC660K-GL AT Command set>>url:https://www.dropbox.com/sh/5f6ssda5fum8rvs/AABT68l8ZzWOvZ5eg2qwOoFda?dl=0]]
655
656
657 == 6.2 Can I use DDS45-NB in condensation environment? ==
658
659
660 DDS45-NB is not suitable to be used in condensation environment. Condensation on the DDS45-NB probe will affect the reading and always got 0.
661
662
663 = 7. Trouble Shooting =
664
665 == 7.1 Why does the sensor reading show 0 or "No sensor" ==
666
667
668 ~1. The measurement object is very close to the sensor, but in the blind spot of the sensor.
669
670 2. Sensor wiring is disconnected
671
672 3. Not using the correct decoder
673
674
675 == 7.2 Abnormal readings The gap between multiple readings is too large or the gap between the readings and the actual value is too large ==
676
677
678 1) Please check if there is something on the probe affecting its measurement (condensed water, volatile oil, etc.)
679
680 2) Does it change with temperature, temperature will affect its measurement
681
682 3) If abnormal data occurs, you can turn on DEBUG mode, Please use downlink or AT COMMAN to enter DEBUG mode.
683
684 downlink command: (% style="color:blue" %)**F1 01**(%%), AT command: (% style="color:blue" %)**AT+DDEBUG=1**
685
686 4) After entering the debug mode, it will send 20 pieces of data at a time, and you can send its uplink to us for analysis
687
688 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS75%20-%20LoRaWAN%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/image-20230113135125-2.png?width=1057&height=136&rev=1.1||alt="image-20230113135125-2.png"]]
689
690
691 Its original payload will be longer than other data. Even though it is being parsed, it can be seen that it is abnormal data.
692
693 Please send the data to us for check.
694
695
696 = 8. Order Info =
697
698
699 Part Number: (% style="color:blue" %)**DDS45-NB-XX**
700
701 (% style="color:red" %)**XX**(%%):
702
703 * (% style="color:#037691" %)**GE**(%%): General version ( Exclude SIM card)
704
705 * (% style="color:#037691" %)**1D**(%%): with 1NCE* 10 years 500MB SIM card and Pre-configure to DataCake server
706
707 (% style="color:#037691" %)**1NCE SIM Card NB-IoT network coverage**(%%): Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Finland, Germany, Great Britain, Greece, Hungary, Ireland, Italy, Latvia, Malta, Netherlands, Norway, Puerto Rico, Russia, Slovak , Republic, Slovenia, Spain, Sweden, Switzerland, Taiwan, USA, US Virgin Islands
708
709
710 = 9. ​Packing Info =
711
712
713 (% style="color:#037691" %)**Package Includes**:
714
715 * DDS45-NB NB-IoT Distance Detection sensor x 1
716
717 * External antenna x 1
718
719 (% style="color:#037691" %)**Dimension and weight**:
720
721 * Device Size: 13.0 x 5 x 4.5 cm
722
723 * Device Weight: 150g
724
725 * Package Size / pcs : 14.0 x 8x 5 cm
726
727 * Weight / pcs : 180g
728
729 = 10. Support =
730
731
732 * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
733
734 * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[Support@dragino.cc>>mailto:Support@dragino.cc]].
735
736 (% style="display:none" %) (%%)