DS03A-NB -- NB-IoT Door Sensor User Manual

The Dragino DS03A-NB is a (% style="color:blue" %) **NB-IoT Door Sensor**(%%) for Internet of Things solution. It (% style="color:blue" %)**detects door open/close status**(%%) and uplinks to IoT server via NB-IoT network. user can see the door status, open duration, open counts in the IoT Server.

22

23

The DS03A-NB will send periodically data every 2 hours as well as for each door open/close action. It also counts the door open times and calculates the last door open duration. Users can also disable the uplink for each open/close event, instead, DS03A-NB can count each open event and uplink periodically.

24

25

DS03A-NB supports (% style="color:blue" %)**Datalog Feature,** (%%)it can save the data when there is no NB-IoT network and uplink when network recover.

26

27

DS03A-NB has the (% style="color:blue" %)**Open Alarm Feature**,(%%) user can set this feature so the device will send an alarm if the door has been open for a certain time.

28

29

DS03A-NB is designed for outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures

30

31

DS03A-NB supports different uplink methods including (% style="color:blue" %)**MQTT, MQTTs, UDP & TCP**(%%) for different application requirement, and support uplinks to various IoT Servers.

32

33

DS03A-NB (% style="color:blue" %)**supports BLE configure **(%%)and(% style="color:blue" %)** OTA update**(%%) which make user easy to use.

34

35

DS03A-NB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long-term use up to several years.

36

37

DS03A-NB has optional built-in SIM card and default IoT server connection version. Which makes it works with simple configuration.

38

39

[[image:image-20231011093807-6.png||height="278" width="879"]]

== 1.2 Features ==

* NB-IoT Bands: B1/B2/B3/B4/B5/B8/B12/B13/B17/B18/B19/B20/B25/B28/B66/B70/B85 @H-FDD

46

* Ultra-low power consumption

47

* Upload water flow volume

48

* Door Open/Close detect

49

* Door open/close statistics

50

* Datalog Feature

51

* Open Alarm Feature

52

* Multiply Sampling and one uplink

53

* Support Bluetooth v5.1 remote configure and update firmware

54

* Uplink on periodically

55

* Downlink to change configure

56

* 8500mAh Battery for long term use

57

* Nano SIM card slot for NB-IoT SIM

58

59

== 1.3 Specification ==

60

61

62

(% style="color:blue" %)**Common DC Characteristics:**

63

64

* Supply Voltage: 2.5v ~~ 3.6v

65

* Operating Temperature: -40 ~~ 85°C

66

67

(% style="color:blue" %)**NB-IoT Spec:**

68

69

(% style="color:#037691" %)**NB-IoT Module: BC660K-GL**

70

71

(% style="color:#037691" %)**Support Bands:**

* B1 @H-FDD: 2100MHz

* B2 @H-FDD: 1900MHz

* B3 @H-FDD: 1800MHz

* B4 @H-FDD: 2100MHz

* B5 @H-FDD: 860MHz

* B8 @H-FDD: 900MHz

* B12 @H-FDD: 720MHz

* B13 @H-FDD: 740MHz

* B17 @H-FDD: 730MHz

* B18 @H-FDD: 870MHz

* B19 @H-FDD: 870MHz

* B20 @H-FDD: 790MHz

* B25 @H-FDD: 1900MHz

86

* B28 @H-FDD: 750MHz

87

* B66 @H-FDD: 2000MHz

88

* B70 @H-FDD: 2000MHz

89

* B85 @H-FDD: 700MHz

90

91

(% style="color:blue" %)**Battery:**

92

93

* Li/SOCI2 un-chargeable battery

94

* Capacity: 8500mAh

95

* Self Discharge: <1% / Year @ 25°C

96

* Max continuously current: 130mA

97

* Max boost current: 2A, 1 second

98

99

(% style="color:blue" %)**Power Consumption**

100

101

* STOP Mode: 10uA @ 3.3v

102

* Max transmit power: 350mA@3.3v

103

104

(% class="wikigeneratedid" id="H1.4Ratedenvironmentalconditions" %)

105

(% style="display:none" %) (%%)

106

107

108

== 1.4 Applications ==

109

110

111

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654741400370-813.png?rev=1.1||alt="1654741400370-813.png"]]

112

113

114

== 1.5 Sleep mode and working mode ==

115

116

117

(% style="color:blue" %)**Deep Sleep Mode: **(%%)Sensor doesn't have any NB-IoT activate. This mode is used for storage and shipping to save battery life.

118

119

(% style="color:blue" %)**Working Mode:** (%%)In this mode, Sensor will work as NB-IoT Sensor to Join NB-IoT network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.

120

121

122

== 1.6 Button & LEDs ==

123

124

125

[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675071855856-879.png]]

126

127

128

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)

129

|=(% style="width: 167px;background-color:#4F81BD;color:white" %)**Behavior on ACT**|=(% style="width: 117px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width:225px;background-color:#4F81BD;color:white" %)**Action**

130

|(% style="width:167px" %)Pressing ACT between 1s < time < 3s|(% style="width:117px" %)Send an uplink|(% style="width:225px" %)(((

131

If sensor has already attached to NB-IoT network, sensor will send an uplink packet, (% style="color:blue" %)**blue led** (%%)will blink once.

132

Meanwhile, BLE module will be active and user can connect via BLE to configure device.

133

)))

134

|(% style="width:167px" %)Pressing ACT for more than 3s|(% style="width:117px" %)Active Device|(% style="width:225px" %)(((

135

(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:#037691" %)**OTA mode**(%%) for 3 seconds. And then start to attach NB-IoT network.

136

(% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.

137

Once sensor is active, BLE module will be active and user can connect via BLE to configure device, no matter if device attach NB-IoT network or not.

138

)))

139

|(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means device is in Deep Sleep Mode.

140

141

== 1.7 BLE connection ==

142

143

144

DS03A-NB support BLE remote configure and firmware update.

145

146

147

BLE can be used to configure the parameter of sensor or see the console output from sensor. BLE will be only activate on below case:

148

149

* Press button to send an uplink

150

* Press button to active device.

151

* Device Power on or reset.

152

153

If there is no activity connection on BLE in 60 seconds, sensor will shut down BLE module to enter low power mode.

154

155

156

== 1.8 Pin Definitions & Switch ==

157

158

159

[[image:image-20230819104805-5.png]]

160

161

162

=== 1.8.1 Jumper JP2 ===

163

164

165

Power on Device when put this jumper.

166

167

168

=== 1.8.2 BOOT MODE / SW1 ===

169

170

171

**1)** (% style="color:blue" %)**ISP**(%%): upgrade mode, device won't have any signal in this mode. but ready for upgrade firmware. LED won't work. Firmware won't run.

172

173

**2)** (% style="color:blue" %)**Flash**(%%): work mode, device starts to work and send out console output for further debug

174

175

176

=== 1.8.3 Reset Button ===

177

178

179

Press to reboot the device.

180

181

(% style="display:none" %)

== 1.9 Mechanical ==

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual/WebHome/1675143884058-338.png?rev=1.1||alt="1675143884058-338.png"]]

187

188

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual/WebHome/1675143899218-599.png?rev=1.1||alt="1675143899218-599.png"]]

189

190

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual/WebHome/1675143909447-639.png?rev=1.1||alt="1675143909447-639.png"]]

**Probe Mechanical:**

195

196

197

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654741444887-479.png?width=513&height=399&rev=1.1||alt="1654741444887-479.png"]]

== 1.10 Magnet Distance ==

202

203

204

* Wood Door: 10mm ~~ 30mm

205

* Iron Door: 30 ~~ 45mm

206

207

= 2. Use DS03A-NB to communicate with IoT Server =

208

209

== 2.1 Send data to IoT server via NB-IoT network ==

210

211

212

The DS03A-NB is equipped with a NB-IoT module, the pre-loaded firmware in DS03A-NB will get environment data from sensors and send the value to local NB-IoT network via the NB-IoT module. The NB-IoT network will forward this value to IoT server via the protocol defined by DS03A-NB.

213

214

215

Below shows the network structure:

216

217

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/DS03A-NB_NB-IoT_Door_Sensor_User_Manual/WebHome/image-20231011093807-6.png?width=879&height=278&rev=1.1||alt="image-20231011093807-6.png"]]

218

219

220

There are two version: (% style="color:blue" %)**-GE**(%%) and (% style="color:blue" %)**-1D**(%%) version of DS03A-NB.

221

222

223

(% style="color:blue" %)**GE Version**(%%): This version doesn't include SIM card or point to any IoT server. User needs to use AT Commands to configure below two steps to set DS03A-NB send data to IoT server.

224

225

* Install NB-IoT SIM card and configure APN. See instruction of [[Attach Network>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H2.AttachNetwork]].

226

227

* Set up sensor to point to IoT Server. See instruction of [[Configure to Connect Different Servers>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.Configuretoconnecttodifferentservers]].

228

229

Below shows result of different server as a glance.

230

231

(% border="1" cellspacing="4" style="width:515px" %)

232

|(% style="background-color:#4f81bd; color:white; width:100px" %)**Servers**|(% style="background-color:#4f81bd; color:white; width:300px" %)**Dash Board**|(% style="background-color:#4f81bd; color:white; width:115px" %)**Comments**

233

|(% style="width:127px" %)[[Node-Red>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.5A0Node-RedA028viaA0MQTT29]]|(% style="width:385px" %)(((

234

(% style="text-align:center" %)

235

[[image:image-20230819113244-8.png||height="183" width="367"]]

236

)))|(% style="width:170px" %)

237

|(% style="width:127px" %)[[DataCake>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.4Datacake]]|(% style="width:385px" %)(((

238

(% style="text-align:center" %)

239

[[image:image-20230819113244-9.png||height="119" width="367"]]

240

)))|(% style="width:170px" %)

241

|(% style="width:127px" %)[[Tago.IO>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.7A0Tago.ioA028viaA0MQTT29]]|(% style="width:385px" %) |(% style="width:170px" %)

242

|(% style="width:127px" %)[[General UDP>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.1GeneralA0UDPA0Connection]]|(% style="width:385px" %)Raw Payload. Need Developer to design Dash Board|(% style="width:170px" %)

243

|(% style="width:127px" %)[[General MQTT>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.2GeneralA0MQTTA0Connection]]|(% style="width:385px" %)Raw Payload. Need Developer to design Dash Board|(% style="width:170px" %)

244

|(% style="width:127px" %)[[ThingSpeak>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.3A0ThingSpeakA028viaA0MQTT29]]|(% style="width:385px" %)(((

245

(% style="text-align:center" %)

246

[[image:image-20230819113244-10.png||height="104" width="367"]]

247

)))|(% style="width:170px" %)

248

|(% style="width:127px" %)[[ThingsBoard>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.6A0ThingsBoard.CloudA028viaA0MQTT29]]|(% style="width:385px" %)(((

249

(% style="text-align:center" %)

250

[[image:image-20230819113244-11.png||height="141" width="367"]]

251

)))|(% style="width:170px" %)

252

253

(% style="color:blue" %)**1D Version**(%%): This version has 1NCE SIM card pre-installed and configure to send value to DataCake. User Just need to select the sensor type in DataCake and Activate DS03A-NB and user will be able to see data in DataCake. See here for [[DataCake Config Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H3.4Datacake]].

254

255

256

== 2.2 Payload Types ==

257

258

259

To meet different server requirement, DS03A-NB supports different payload type.

**Includes:**

* [[General JSON format payload>>||anchor="H2.2.1GeneralJsonFormat28Type3D529"]]. (Type=5)

264

265

* [[HEX format Payload>>||anchor="H2.2.2HEXformatPayload28Type3D029"]]. (Type=0)

266

267

* [[ThingSpeak Format>>||anchor="H2.2.4ThingSpeakPayload28Type3D129"]]. (Type=1)

268

269

* [[ThingsBoard Format>>||anchor="H2.2.3ThingsBoardPayload28Type3D329"]]. (Type=3)

270

271

User can specify the payload type when choose the connection protocol. Example:

272

273

(% style="color:#037691" %)**AT+PRO=2,0** (%%) ~/~/ Use UDP Connection & hex Payload

274

275

(% style="color:#037691" %)**AT+PRO=2,5** (%%) ~/~/ Use UDP Connection & Json Payload

276

277

(% style="color:#037691" %)**AT+PRO=3,5 ** (%%) ~/~/ Use MQTT Connection & Json Payload

278

279

280

=== 2.2.1 General Json Format(Type~=5) ===

281

282

283

This is the General Json Format. As below:

284

285

(% style="color:#4472c4" %)**{"IMEI":"866207058378443","Model":"DS03A-NB","flow":217,"battery":3.54,"signal":24,"1":{221,2023/09/20 09:47:01},"2":{0,2023/09/20 09:15:04},"3":{0,2023/09/20 09:00:04},"4":{0,2023/09/20 08:45:03},"5":{0,2023/09/20 08:30:03},"6":{0,2023/09/20 08:15:03},"7":{0,2023/09/20 08:00:04},"8":{0,2023/09/20 07:45:04}}**

286

287

288

[[image:image-20230920175015-3.png||height="613" width="890"]]

289

290

291

(% style="color:red" %)**Notice, from above payload:**

292

293

* Distance , Battery & Signal are the value at uplink time.

294

295

* Json entry 1 ~~ 8 are the last 1 ~~ 8 sampling data as specify by (% style="color:#037691" %)**AT+NOUD=8 ** (%%)Command. Each entry includes (from left to right): Water Flow, Sampling time.

296

297

=== 2.2.2 HEX format Payload(Type~=0) ===

298

299

300

This is the HEX Format. As below:

301

302

(% style="color:#4472c4" %)**f8662070583784430b640dda15010003a4650abc400000650ab8180000650ab4940000650ab10f0000650aad8b0000650aaa070000650aa6840000650aa3000000650a9308**

303

304

[[image:image-20230920172200-1.png||height="191" width="1047"]]

305

306

307

If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the NB sensor uplink data.

308

309

[[image:image-20230920173352-2.png||height="636" width="919"]]

310

311

312

(% style="color:blue" %)**Version:**

313

314

These bytes include the hardware and software version.

315

316

(% style="color:#037691" %)**Higher byte:**(%%) Specify Sensor Model: 0x12 for DS03A-NB

317

318

(% style="color:#037691" %)**Lower byte:**(%%) Specify the software version: 0x64=100, means firmware version 1.0.0

319

320

321

(% style="color:blue" %)**BAT (Battery Info):**

Ex1: 0x0dda = 3546mV

(% style="color:blue" %)**Signal Strength:**

327

328

NB-IoT Network signal Strength.

**Ex1: 0x15 = 21**

**0** -113dBm or less

**1** -111dBm

**2...30** -109dBm... -53dBm

337

338

**31** -51dBm or greater

339

340

**99** Not known or not detectable

341

342

343

(% style="color:blue" %)**Timestamp: **

344

345

Unit Timestamp Example: 650abc40(H) = 1695202368(D)

346

347

Put the decimal value into this link([[https:~~/~~/www.epochconverter.com)>>https://www.epochconverter.com]]) to get the time.

348

349

350

=== 2.2.3 ThingsBoard Payload(Type~=3) ===

351

352

353

Type3 payload special design for ThingsBoard, it will also configure other default server to ThingsBoard.

354

355

(% style="color:#4472c4" %)** {"IMEI": "866207058378443","Model": "DS03A","flow": 502,"battery": 3.57,"signal": 23}**

356

357

[[image:image-20230922094043-2.png||height="558" width="851"]]

=== 2.2.4 ThingSpeak Payload(Type~=1) ===

362

363

364

This payload meets ThingSpeak platform requirement. It includes only four fields. Form 1~~3 are:

365

366

Distance, Battery & Signal. This payload type only valid for ThingsSpeak Platform

As below:

(% style="color:#4472c4" %)**field1=Flow value&field2=Battery value&field3=Singal value**

371

372

[[image:image-20230921104741-1.png||height="565" width="826"]]

373

374

375

== 2.3 Uplink Payload ==

376

377

=== 2.3.1 Sensor Configuration, FPORT~=4 ===

378

379

380

DS03A-NB will only send this command after getting the downlink command **(0x26 02)** from the server.

381

382

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)

383

|(% colspan="8" style="background-color:#4f81bd; color:white; width:515px" %)**Sensor Configuration FPORT=4**

384

385

|**Value**|(% style="width:75px" %)TDC (unit:sec)|(% style="width:77px" %)Disalarm|(% style="width:96px" %)(((

386

Keep status1

387

)))|(% style="width:99px" %)(((

388

Keep time1(unit: sec)

389

)))|(% style="width:87px" %)Keep status2|(% style="width:97px" %)(((

390

Keep time2(unit: sec)

391

)))|(% style="width:98px" %)(((

392

Alarm interval(unit: min)

393

)))

394

395

Example parse in TTNv3

396

397

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/DS03A-LB/WebHome/image-20230630155527-3.png?width=902&height=146&rev=1.1||alt="image-20230630155527-3.png"]]

* (((

(% style="color:blue" %)**TDC: (default: 0x001C20)**

402

)))

403

404

Uplink interval for the Open/Close Event, default value is 0x001C20 which is 7200 seconds = 2 hours.

* (((

(% style="color:blue" %)**Disalarm: (default: 0)**

409

)))

410

411

**If Disalarm = 1**, DS03A-NB will only send uplink at every TDC periodically. This is normally use for pulse meter application, in this application, there are many open/close event, and platform only care about the total number of pulse.

412

413

**If Disalarm = 0**, DS03A-NB will send uplink at every TDC periodically and send data on each open/close event. This is useful for the application user need to monitor the open/close event in real-time.

414

415

416

(% style="color:red" %)** Note: When Disalarm=0, a high frequently open/close event will cause lots of uplink and drain battery very fast. **

* (((

(% style="color:blue" %)**Keep Status1 & Keep Time1 & Keep Status2 & Keep Time2**

421

)))

422

423

Shows the configure value of [[Alarm Base on Timeout Feature>>||anchor="H2.9AlarmBaseonTimeout"]]

* (((

(% style="color:blue" %)**Alarm interval(default: 0)**

429

)))

430

431

When the state of the door sensor has not been changed after the timeout alarm, the device will send a uplink every alarm interval. It will stop the alarm until the state of the door sensor is changed after the timeout alarm.

432

433

434

=== 2.3.2 Real-Time Open/Close Status, Uplink FPORT~=2 ===

435

436

437

DS03A-NB will send this uplink **after** Device Status once join the LoRaWAN network successfully. And DS03A-NB will send uplinks when:

438

439

* Every 2 hours, this interval [[can be changed>>||anchor="H2.7SetTransmitIntervalTime"]].

440

* There is an Open/Close event. (This info can be disabled by AT+DISALARM=1)

441

442

**1) When (% style="color:blue" %)AT+TTRCHANNEL=1(%%), Uplink Payload totals (% style="color:blue" %)11 bytes. (Default mode)(%%)**

443

444

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)

445

|=(% colspan="5" style="background-color:#4F81BD;color:white;width:515px" %)**Real-Time Open/Close Status, FPORT=2**

446

447

|(% style="width:95px" %)**Value**|(% style="width:97px" %)(((

448

Status & [[Alarm>>||anchor="2.10TTRIG126TTRIG2timeoutstatusalarm"]]

449

)))|(% style="width:95px" %)Total open door events|(% style="width:119px" %)(((

450

The last door open duration (unit: sec)

451

)))|(% style="width:108px" %)Unix TimeStamp

**Status & Alarm:**

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)

456

|(% style="background-color:#4f81bd; color:white; width:50px" %)**Size(bit)**|(% style="background-color:#4f81bd; color:white; width:60px" %)**[bit7:bit4]**|(% style="background-color:#4f81bd; color:white; width:80px" %)**bit3**|(% style="background-color:#4f81bd; color:white; width:100px" %)**bit2**|(% style="background-color:#4f81bd; color:white; width:120px" %)**bit1**|(% style="background-color:#4f81bd; color:white; width:105px" %)**bit0**

457

|(% style="width:76px" %)**Value**|(% style="width:96px" %)Reserve|(% style="width:110px" %)(((

458

Count mod

459

)))|(% style="width:106px" %)TDC flag 0:No;1:Yes|(% style="width:148px" %)(((

460

Alarm 0: No Alarm; 1: Alarm

461

)))|(% style="width:131px" %)(((

462

Status 0: Close; 1: Open

463

)))

464

465

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/DS03A-LB/WebHome/image-20230630155451-2.png?width=928&height=246&rev=1.1||alt="image-20230630155451-2.png"]]

* (((

(% style="color:blue" %)**Count mod:Default=0**

470

)))

471

472

0: Uplink total open door times since factory

473

474

1: Uplink total open door times since last FPORT=2 uplink.

475

476

477

* (% style="color:blue" %)**TDC flag**

478

479

When the flag is 1, it means sending packets at normal time intervals.

480

481

Otherwise, it is a packet sent at non-TDC time.

* (((

(% style="color:#0000ff" %)**Alarm**

486

)))

487

488

See [[Alarm Base on Timeout>>||anchor="H3.3.3A0AlarmBaseonTimeout"]]

* (((

(% style="color:blue" %)**Status**

493

)))

494

495

This bit is 1 when the door sensor is open and 0 when it is close.

* (((

(% style="color:blue" %)**Total open door events**

500

)))

501

502

Total pulse/counting base on open door.

503

504

Range (3 Bytes) : 0x000000 ~~ 0xFFFFFF . Max: 16777215

* (((

(% style="color:blue" %)**The last door open duration**

509

)))

510

511

Door sensor last open duration.

Unit: sec.

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/DS03A-LB/WebHome/image-20230701094042-1.png?width=763&height=154&rev=1.1||alt="image-20230701094042-1.png"]]

516

517

518

**2) When (% style="color:blue" %)AT+TTRCHANNEL=2(%%), Uplink Payload totals (% style="color:blue" %)18 bytes(%%)**(% style="color:blue" %).

519

520

(When the maximum DR of some frequencies is 11 bytes, it will cause the server to receive empty packets)

521

522

(% style="color:red" %)**Note:When using the AT+TTRCHANNEL=2 command, the Datalog function cannot be used.**

523

524

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)

525

|=(% colspan="8" style="background-color:#4F81BD;color:white; width: 515px;" %)**Real-Time Open/Close Status, FPORT=2**

526

527

|(% style="width:95px" %)**Value**|(% style="width:97px" %)(((

528

Status1 & Alarm1

529

)))|(% style="width:95px" %)Total open door events1|(% style="width:125px" %)(((

530

The last door open duration1 (unit: sec)

531

)))|(% style="width:100px" %)Unix TimeStamp|(% style="width:86px" %)(((

532

Status2 & Alarm2

533

)))|(% style="width:96px" %)Total open door events2|(% style="width:126px" %)The last door open duration2 (unit: sec)

534

535

**Status1 & Alarm1:**

536

537

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:514px" %)

538

|(% style="background-color:#4f81bd; color:white; width:50px" %)**Size(bit)**|(% style="background-color:#4f81bd; color:white; width:60px" %)**[bit7:bit4]**|(% style="background-color:#4f81bd; color:white; width:70px" %)**bit3**|(% style="background-color:#4f81bd; color:white; width:100px" %)**bit2**|(% style="background-color:#4f81bd; color:white; width:117px" %)**bit1**|(% style="background-color:#4f81bd; color:white; width:117px" %)**bit0**

539

|(% style="width:76px" %)**Value**|(% style="width:96px" %)Reserve|(% style="width:99px" %)(((

540

Count mod

541

)))|(% style="width:103px" %)TDC flag 0:No;1:Yes|(% style="width:216px" %)(((

542

Alarm1 0: No Alarm; 1: Alarm (PA8 of pin)

543

)))|(% style="width:181px" %)(((

544

Status1 0: Close; 1: Open (PA8 of pin)

545

)))

546

547

**Status2 & Alarm2:**

548

549

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)

550

|(% style="background-color:#4f81bd; color:white; width:50px" %)**Size(bit)**|(% style="background-color:#4f81bd; color:white; width:60px" %)**[bit7:bit2]**|(% style="background-color:#4f81bd; color:white; width:200px" %)**bit1**|(% style="background-color:#4f81bd; color:white; width:200px" %)**bit0**

551

|(% style="width:76px" %)**Value**|(% style="width:113px" %)Reserve|(% style="width:219px" %)(((

552

Alarm2 0: No Alarm; 1: Alarm (PA4 of pin)

553

)))|(% style="width:181px" %)(((

554

Status2 0: Close; 1: Open (PA4 of pin)

555

)))

556

557

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/DS03A-LB/WebHome/image-20230630155908-6.png?width=927&height=295&rev=1.1||alt="image-20230630155908-6.png"]]

* (((

(% style="color:blue" %)**Count mod:Default=0**

562

)))

563

564

0: Uplink total open door times since factory

565

566

1: Uplink total open door times since last FPORT=2 uplink.

567

568

569

* (% style="color:blue" %)**TDC flag**

570

571

When the flag is 1, it means sending packets at normal time intervals.

572

573

Otherwise, it is a packet sent at non-TDC time.

* (((

(% style="color:#0000ff" %)**Alarm1 or Alarm2**

578

)))

579

580

See [[Alarm Base on Timeout>>||anchor="H2.9AlarmBaseonTimeout"]]

* (((

(% style="color:blue" %)**Status1 **(% style="color:#0000ff" %)**or **(% style="color:blue" %)**Status2**

585

)))

586

587

This bit is 1 when the door sensor is open and 0 when it is close.

* (((

(% style="color:blue" %)**Total open door events1 **(% style="color:#0000ff" %)**or**(% style="color:blue" %)** Total open door events2**

592

)))

593

594

Total pulse/counting base on open door.

595

596

Range (3 Bytes) : 0x000000 ~~ 0xFFFFFF . Max: 16777215

* (((

(% style="color:blue" %)**The last door open duration1 **(% style="color:#0000ff" %)**or**(% style="color:blue" %)** The last door open duration2**

601

)))

602

603

Door sensor last open duration.

Unit: sec.

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/DS03A-LB/WebHome/image-20230701094042-1.png?width=763&height=154&rev=1.1||alt="image-20230701094042-1.png"]]

608

609

610

=== 2.3.3 Historical Door Open/Close Event, FPORT~=3 ===

611

612

613

DS03A-NB stores sensor values and users can retrieve these history values via the downlink command.

614

615

The historical payload includes one or multiplies entries and every entry has the same payload as Real-Time open/close status.

616

617

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)

618

|=(% colspan="5" style="background-color:#4F81BD;color:white;width:515px" %)**Real-Time Open/Close Status, FPORT=3**

619

620

|(% style="width:95px" %)**Value**|(% style="width:97px" %)(((

621

Status & [[Alarm>>||anchor="H2.9A0AlarmBaseonTimeout"]]

622

)))|(% style="width:95px" %)Total open door events|(% style="width:119px" %)(((

623

The last door open duration (unit: sec)

624

)))|(% style="width:108px" %)Unix TimeStamp

**Status & Alarm:**

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)

629

|(% style="background-color:#4f81bd; color:white; width:50px" %)**Size(bit)**|(% style="background-color:#4f81bd; color:white; width:75px" %)**bit7**|(% style="background-color:#4f81bd; color:white; width:65px" %)**bit6**|(% style="background-color:#4f81bd; color:white; width:50px" %)**[bit5:bit4]**|(% style="background-color:#4f81bd; color:white; width:50px" %)**bit3**|(% style="background-color:#4f81bd; color:white; width:70px" %)**bit2**|(% style="background-color:#4f81bd; color:white; width:80px" %)**bit1**|(% style="background-color:#4f81bd; color:white; width:75px" %)**bit0**

630

631

Count mod

632

)))|(% style="width:95px" %)(((

633

TDC flag 0:No; 1:Yes

634

)))|(% style="width:116px" %)(((

635

Alarm 0: No Alarm; 1: Alarm

636

)))|(% style="width:112px" %)(((

637

Status 0:Close; 1: Open

)))

* (((

Each data entry is 11 bytes and has the same structure as [[Real-Time open/close status>>||anchor="H2.3.2A0Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2"]], to save airtime and battery, DS03A-NB will send max bytes according to the current DR and Frequency bands.

642

)))

643

644

For example, in the US915 band, the max payload for different DR is:

645

646

(((

647

**~1. DR0**: max is 11 bytes so one entry of data

)))

(((

**2. DR1**: max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)

)))

(((

**3. DR2**: total payload includes 11 entries of data

)))

(((

**4. DR3**: total payload includes 22 entries of data.

660

)))

661

662

If DS03A-NB doesn't have any data in the polling time. It will uplink 11 bytes of 0

663

664

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/DS03A-LB/WebHome/image-20230630155556-4.png?width=938&height=146&rev=1.1||alt="image-20230630155556-4.png"]]

**Downlink:**

0x31 64 9E 7D 34 64 9E 7E 9C 05

**Uplink:**

45 00 00 00 00 00 00 64 9E 7D 48 40 00 00 00 00 00 63 64 9E 7D 9C 41 00 00 01 00 00 63 64 9E 7D A4 40 00 00 01 00 00 8D 64 9E 7E 31 43 00 00 02 00 00 8D 64 9E 7E 44 48 00 00 02 00 00 1F 64 9E 7E 59 4B 00 00 03 00 00 1F 64 9E 7E 6B

**Parsed Value:**

[COUNTMOD, TDC_FLAG, ALARM, DOOR_STATUS, OPEN_DOOR_TIMES, LAST_DOOR_OPEN_DURATION, TIME]

679

680

681

[SUM,YES,FALSE,OPEN,0,0,2023-06-30 06:59:20],

682

683

[SUM,NO,FALSE,CLOSE,0,99,2023-06-30 07:00:44],

684

685

[SUM,NO,FALSE,OPEN, 1,99,2023-06-30 07:00:52],

686

687

[SUM,NO,FALSE,CLOSE,1,141,2023-06-30 07:03:13],

688

689

[SUM,NO,TRUE,OPEN, 2,141,2023-06-30 07:03:32],

690

691

[PART,NO,FALSE,CLOSE,2,31,2023-06-30 07:03:53],

692

693

[PART,NO,TRUE,OPEN, 3,31,2023-06-30 07:04:11],

694

695

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/DS03A-LB/WebHome/image-20230630172740-1.png?width=868&height=199&rev=1.1||alt="image-20230630172740-1.png"]]

696

697

698

== 2.4 Test Uplink and Change Update Interval ==

699

700

701

By default, Sensor will send uplinks (% style="color:blue" %)**every 2 hours**(%%) & AT+NOUD=8

702

703

User can use below commands to change the (% style="color:blue" %)**uplink interval**.

704

705

(% style="color:#037691" %)**AT+TDC=600 ** (%%) ~/~/ Set Update Interval to 600s

706

707

User can also push the button for more than 1 seconds to activate an uplink.

708

709

710

== 2.5 Multi-Samplings and One uplink ==

711

712

713

To save battery life, DS03A-NB will sample Water Flow data every 15 minutes and send one uplink every 2 hours. So each uplink it will include 8 stored data + 1 real-time data. They are defined by:

714

715

* (% style="color:#037691" %)**AT+TR=900** (%%) ~/~/ The unit is seconds, and the default is to record data once every 900 seconds (15 minutes, the minimum can be set to 180 seconds)

716

717

* (% style="color:#037691" %)**AT+NOUD=8** (%%)~/~/ The device uploads 8 sets of recorded data by default. Up to 32 sets of record data can be uploaded.

718

719

The diagram below explains the relationship between TR, NOUD, and TDC more clearly:

720

721

[[image:1692424376354-959.png]]

722

723

724

== 2.6 Trggier an uplink by external interrupt ==

725

726

727

DS03A-NB has an external trigger interrupt function. Users can use the PB15 pin to trigger the upload of data packets.

728

729

(% style="color:blue" %)**AT command:**

730

731

* (% style="color:#037691" %)**AT+INTMOD **(%%) ~/~/ Set the trigger interrupt mode

732

733

* (% style="color:#037691" %)**AT+INTMOD=0 **(%%) ~/~/ Disable Interrupt

734

735

* (% style="color:#037691" %)**AT+INTMOD=1 **(%%) ~/~/ Trigger by rising and falling edge

736

737

* (% style="color:#037691" %)**AT+INTMOD=2 **(%%) ~/~/ Trigger by falling edge

738

739

* (% style="color:#037691" %)**AT+INTMOD=3 **(%%) ~/~/ Trigger by rising edge

740

741

== 2.7 Set Transmit Interval Time ==

(((

Feature: Change NB-IoT End Node Transmit Interval.

)))

(((

(% style="color:blue" %)**AT Command: AT+TDC**

750

)))

751

752

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)

753

|=(% style="width: 156px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 137px;background-color:#4F81BD;color:white" %)**Function**|=(% style="background-color:#4F81BD;color:white" %)**Response**

754

|(% style="width:156px" %)AT+TDC=?|(% style="width:137px" %)Show current transmit Interval|(((

755

30000

756

OK

757

the interval is 30000ms = 30s

758

)))

759

|(% style="width:156px" %)AT+TDC=60000|(% style="width:137px" %)Set Transmit Interval|(((

760

OK

761

Set transmit interval to 60000ms = 60 seconds

)))

(((

(% style="color:blue" %)**Downlink Command: 0x01**

)))

(((

Format: Command Code (0x01) followed by 3 bytes time value.

)))

(((

If the downlink payload=0100003C, it means set the END Node's Transmit Interval to 0x00003C=60(S), while type code is 01.

)))

* (((

Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds

778

)))

779

* (((

780

Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds

781

)))

782

783

== 2.8 Enable / Disable Alarm ==

784

785

786

Feature: Enable/Disable Alarm for open/close event. Default value 0.

787

788

(% style="color:blue" %)**AT Command: **

789

790

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)

791

|(% style="background-color:#4f81bd; color:white; width:153px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:276px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:86px" %)**Response**

792

|(% style="width:154px" %)AT+DISALARM=1|(% style="width:278px" %)End node will only send packets in TDC time.|OK

793

|(% style="width:154px" %)AT+DISALARM=0|(% style="width:278px" %)End node will send packets in TDC time or status change for door sensor|OK

794

795

(% style="color:blue" %)**Downlink Command: **

796

797

0xA7 01 ~/~/ Same As AT+DISALARM=1

798

799

0xA7 00 ~/~/ Same As AT+DISALARM=0

800

801

802

== 2.9 Alarm Base on Timeout ==

803

804

805

DS03A-NB can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:

806

807

* (((

808

(% style="color:blue" %)**Keep Status: Status to be monitor**

809

)))

810

811

(% style="color:#037691" %)**Keep Status = 1**(%%): Monitor Close to Open event

812

813

(% style="color:#037691" %)**Keep Status = 0**(%%): Monitor Open to Close event

* (((

(% style="color:blue" %)**Keep Time: Timeout to send an Alarm**

818

)))

819

820

Range 0 ~~ 65535(0xFFFF) seconds.

821

822

If (% style="color:#037691" %)**keep time = 0**(%%), Disable Alarm Base on Timeout feature.

823

824

If (% style="color:#037691" %)**keep time > 0**(%%), device will monitor the keep status event and send an alarm when status doesn't change after timeout.

* (((

(% style="color:blue" %)**Downlink Command**

829

)))

830

831

(% style="color:#037691" %)**Command: 0xA9 aa bb cc dd**

832

833

**A9:** Command Type Code

834

835

**aa: **01:TTRIG1; 02:TTRIG2

836

837

**bb:** status to be monitored

**cc dd:** timeout.

**1) AT+TTRIG1 : (PA8 of pin)**

843

844

(% style="color:blue" %)**AT Command to configure:**

845

846

* (((

847

(% style="color:#037691" %)**AT+TTRIG1=1,30** (%%) **~-~->** When the **Keep Status** change from close to open, and device remains in open status for more than 30 seconds. DS03A-NB will send an uplink packet, the Alarm1 bit(the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.

848

849

(% style="color:#037691" %)**AT+TTRIG1=0,30** (%%) **~-~->** When the **Keep Status** change from open to close, and device remains in open status for more than 30 seconds. DS03A-NB will send an uplink packet, the Alarm1 bit (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.

)))

* (((

(% style="color:#037691" %)**AT+TTRIG1=0,0** (%%) **~-~-> ** Default Value, disable timeout Alarm.

)))

(% style="color:blue" %)**Downlink Command to configure:**

860

861

If user send 0xA9 01 01 00 1E: equal to AT+TTRIG1=1,30 **or** 0xA9 01 00 00 00: Equal to AT+TTRIG1=0,0.

862

863

864

**2) AT+TTRIG2 : (PA4 of pin,need to use AT+TTRCHANNEL=2)**

865

866

(% style="color:blue" %)**AT Command to configure:**

867

868

* (((

869

(% style="color:#037691" %)**AT+TTRIG2=1,30** (%%) **~-~->** When the **Keep Status** change from close to open, and device remains in open status for more than 30 seconds. DS03A-NB will send an uplink packet, the Alarm2 bit (the second bit of 12^^st^^ byte of payload) on this uplink packet is set to 1.

870

871

(% style="color:#037691" %)**AT+TTRIG2=0,30** (%%) **~-~->** When the **Keep Status** change from open to close, and device remains in open status for more than 30 seconds. DS03A-NB will send an uplink packet, the Alarm2 bit (the second bit of 12^^st^^ byte of payload) on this uplink packet is set to 1.

)))

* (((

(% style="color:#037691" %)**AT+TTRIG2=0,0** (%%) **~-~-> ** Default Value, disable timeout Alarm.

)))

(% style="color:blue" %)**Downlink Command to configure:**

882

883

If user send 0xA9 02 00 00 1E: equal to AT+TTRIG2=0,30 **or** 0xA9 02 00 00 00: Equal to AT+TTRIG2=0,0.

884

885

886

== 2.10 TTRIG1 & TTRIG2 timeout status alarm ==

887

888

889

It needs to be used with AT+TTRIG1 or AT+TTRIG2. When TTRIG1 or TTRIG2 times out and causes an alarm, and the status does not change subsequently, an alarm packet will be sent at the alarm interval.

890

891

(% style="color:blue" %)**AT Command:**

892

893

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)

894

|=(% style="width: 155px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 279px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 76px;background-color:#4F81BD;color:white" %)**Response**

895

|(% style="width:155px" %)(((

896

AT+TTRALARM=0

897

)))|(% style="width:279px" %)(((

898

disable continuous alarm

899

)))|(% style="width:84px" %)(((

900

OK

901

)))

902

|(% style="width:155px" %)(((

903

AT+TTRALARM=60

904

)))|(% style="width:279px" %)(((

905

The alarm interval is 60 minutes (unit: minutes)

906

)))|(% style="width:84px" %)(((

OK

)))

(% style="color:blue" %)**Downlink Command:**

911

912

Example: 0C aa => AT+TTRALARM= aa

== 2.11 Count Mod ==

Feature: Manually set the count mode.

919

920

(% style="color:blue" %)**AT Command:**

921

922

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)

923

|=(% style="width: 154px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 275px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 86px;background-color:#4F81BD;color:white" %)**Response**

924

|(% style="width:155px" %)(((

925

AT+COUNTMOD=0

926

)))|(% style="width:277px" %)(((

927

the count value keeps accumulating mode

928

)))|(% style="width:86px" %)(((

929

OK

930

)))

931

|(% style="width:155px" %)(((

932

AT+COUNTMOD=1

933

)))|(% style="width:277px" %)(((

934

the count value will be reset after each TDC time(Last Close Duration Reset after each uplink)

935

)))|(% style="width:86px" %)(((

OK

)))

(% style="color:blue" %)**Downlink Command:**

940

941

Example: 0B aa => AT+COUNTMOD = second byte

942

943

944

== 2.12 Number of channel of door sensors ==

945

946

947

Feature: Set the number of door sensor channels.

948

949

(% style="color:blue" %)**AT Command:**

950

951

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)

952

|=(% style="width: 155px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 288px; background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 57px;background-color:#4F81BD;color:white" %)**Response**

953

|(% style="width:155px" %)(((

954

AT+TTRCHANNEL=1

955

)))|(% style="width:259px" %)(((

956

Set as single channel, only use PA8 pin as interrupt pin.

957

)))|(% style="width:44px" %)(((

958

OK

959

)))

960

|(% style="width:155px" %)(((

961

AT+TTRCHANNEL=2

962

)))|(% style="width:259px" %)(((

963

Set as dual channel, use PA8 pin and PA4 pin as interrupt pin.

964

)))|(% style="width:44px" %)(((

OK

)))

(% style="color:blue" %)**Downlink Command:**

969

970

Example: 0D aa => AT+TTRCHANNEL = second byte

971

972

973

== 2.13 Clear the open door times and the duration of the last open door ==

974

975

976

(% style="color:blue" %)**AT Command:**

977

978

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)

979

|=(% style="width: 163px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 290px; background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 57px;background-color:#4F81BD;color:white" %)**Response**

980

|(% style="width:155px" %)AT+CLRC|(% style="width:259px" %)clear the open door times and the duration of the last open door.|(% style="width:44px" %)(((

OK

)))

(% style="color:blue" %)**Downlink Command:**(%%)0xA6 01

985

986

The sensor will clear the open door times and the duration of the last open door.

987

988

989

== 2.14 Set the count value of the number of open door ==

990

991

992

(% style="color:blue" %)**AT Command:**

993

994

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)

995

|=(% style="width: 155px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 288px; background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 57px;background-color:#4F81BD;color:white" %)**Response**

996

|(% style="width:155px" %)(((

997

AT+SETCNT=1,100

998

)))|(% style="width:259px" %)(((

999

Set the open door times of PA8 pin to 100 times.

1000

)))|(% style="width:44px" %)(((

1001

OK

1002

)))

1003

|(% style="width:155px" %)AT+SETCNT=1,0|(% style="width:259px" %)Clear the open door times of PA8 pin.|(% style="width:44px" %)OK

1004

|(% style="width:155px" %)(((

1005

AT+SETCNT=2,50

1006

)))|(% style="width:259px" %)(((

1007

Set the open door times of PA4 pin to 100 times.

1008

)))|(% style="width:44px" %)(((

OK

)))

(% style="color:blue" %)**Downlink Command:**

1013

1014

0xA6 01 00 00 64 ==> AT+SETCNT=1,100

1015

1016

0xA6 01 00 00 00 ==> AT+SETCNT=1,0

1017

1018

0xA6 02 00 00 32 ==> AT+SETCNT=2,50

1019

1020

1021

= 3. Configure DS03A-NB =

1022

1023

== 3.1 Configure Methods ==

1024

1025

1026

DS03A-NB supports below configure method:

1027

1028

* AT Command via Bluetooth Connection (**Recommended**): [[BLE Configure Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].

1029

1030

* AT Command via UART Connection : See [[UART Connection>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H2.3UARTConnectionforSN50v3basemotherboard]].

1031

1032

== 3.2 AT Commands Set ==

1033

1034

1035

AT+<CMD>? : Help on <CMD>

AT+<CMD> : Run <CMD>

AT+<CMD>=<value> : Set the value

1040

1041

AT+<CMD>=? : Get the value

1042

1043

1044

(% style="color:blue" %)**General Commands**

AT : Attention

AT? : Short Help

ATZ : MCU Reset

AT+TDC : Application Data Transmission Interval

1053

1054

AT+CFG : Print all configurations

1055

1056

AT+CFGMOD : Working mode selection

1057

1058

AT+DEUI : Get or set the Device ID

1059

1060

AT+INTMOD : Set the trigger interrupt mode

1061

1062

AT+5VT : Set extend the time of 5V power

1063

1064

AT+PRO : Choose agreement

1065

1066

AT+RXDL : Extend the sending and receiving time

1067

1068

AT+DNSCFG : Get or Set DNS Server

1069

1070

AT+GETSENSORVALUE : Returns the current sensor measurement

1071

1072

AT+NOUD : Get or Set the number of data to be uploaded

1073

1074

AT+CDP : Read or Clear cached data

1075

1076

AT+SHTEMP: Get or Set alarm of temp

1077

1078

AT+SHHUM: Get or Set alarm of moisture

1079

1080

AT+SERVADDR : Server Address

1081

1082

1083

(% style="color:blue" %)**UDP Management**

1084

1085

AT+CFM : Upload confirmation mode (only valid for UDP)

1086

1087

1088

(% style="color:blue" %)**MQTT Management**

1089

1090

AT+CLIENT : Get or Set MQTT client

1091

1092

AT+UNAME : Get or Set MQTT Username

1093

1094

AT+PWD : Get or Set MQTT password

1095

1096

AT+PUBTOPIC : Get or Set MQTT publish topic

1097

1098

AT+SUBTOPIC : Get or Set MQTT subscription topic

1099

1100

1101

(% style="color:blue" %)**Information**

1102

1103

AT+FDR : Factory Data Reset

1104

1105

AT+PWORD : Serial Access Password

1106

1107

AT+LDATA : Get the last upload data

1108

1109

AT+CDP : Read or Clear cached data

1110

1111

1112

= 4. Battery & Power Consumption =

1113

1114

1115

DS03A-NB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.

1116

1117

[[**Battery Info & Power Consumption Analyze**>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .

1118

1119

1120

= 5. Firmware update =

1121

1122

1123

User can change device firmware to::

1124

1125

* Update with new features.

* Fix bugs.

Firmware and changelog can be downloaded from : **[[Firmware download link>>https://www.dropbox.com/sh/zbsm9p4coksqwd5/AADy2ZJc39KsvfbhTMCUGmz1a?dl=0]]**

1130

1131

Methods to Update Firmware:

1132

1133

* (Recommended way) OTA firmware update via BLE: [[**Instruction**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/BLE_Firmware_Update_NB_Sensors_BC660K-GL/]].

1134

1135

* Update through UART TTL interface : **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.

= 6. FAQ =

== 6.1 How can I access t BC660K-GL AT Commands? ==

1140

1141

1142

User can access to BC660K-GL directly and send AT Commands.

1143

1144

[[See BC660K-GL AT Command set>>url:https://www.dropbox.com/sh/5f6ssda5fum8rvs/AABT68l8ZzWOvZ5eg2qwOoFda?dl=0]]

= 7. Order Info =

Part Number: (% style="color:blue" %)**DS03A-NB-XX**

1151

1152

(% style="color:red" %)**XX**(%%):

1153

1154

* (% style="color:#037691" %)**GE**(%%): General version ( Exclude SIM card)

1155

1156

* (% style="color:#037691" %)**1D**(%%): with 1NCE* 10 years 500MB SIM card and Pre-configure to DataCake server

1157

1158

(% style="color:#037691" %)**1NCE SIM Card NB-IoT network coverage**(%%): Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Finland, Germany, Great Britain, Greece, Hungary, Ireland, Italy, Latvia, Malta, Netherlands, Norway, Puerto Rico, Russia, Slovak , Republic, Slovenia, Spain, Sweden, Switzerland, Taiwan, USA, US Virgin Islands

= 8. Packing Info =

(% style="color:#037691" %)**Package Includes**:

1166

1167

* DS03A-NB NB-IoT Door sensor x 1

1168

1169

* External antenna x 1

1170

1171

(% style="color:#037691" %)**Dimension and weight**:

1172

1173

* Device Size: 13.0 x 5 x 4.5 cm

1174

1175

* Device Weight: 150g

1176

1177

* Package Size / pcs : 14.0 x 8x 5 cm

1178

1179

* Weight / pcs : 180g

= 9. Support =

* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.

1185

1186

* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[Support@dragino.cc>>mailto:Support@dragino.cc]].

1187

1188

(% style="display:none" %) (%%)

Wiki source code of DS03A-NB -- NB-IoT Door Sensor User Manual

Applications

Navigation