Changes for page WQS-NB/NS -- NB-IoT Water Quality Sensor Transmitter User Manual

Last modified by kai on 2025/08/06 10:05

From 145.1 to 146.1 From 147.1 to 148.1

From version 146.1

edited by Karry Zhuang
on 2024/07/17 11:45

Change comment: There is no comment for this version

To version 147.1

edited by Karry Zhuang
on 2024/07/17 11:47

Change comment: There is no comment for this version

Raw
Rendered

Summary

Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

@@ -1118,7 +1118,6 @@
  * Do not arbitrarily change the components or wires that have been welded at the factory when using the product.
  * The sensor is a precision device. When using it, please do not disassemble it by yourself or contact the sensor surface with sharp objects or corrosive liquids to avoid damaging the product.
--
  == 6.5  turbidity Sensor ==
@@ -1157,7 +1157,6 @@
  * Working environment: temperature 0～60℃; humidity ≤95%RH
  * Power consumption: ≤0.5W
--
  === 6.5.3  Dimension ===
@@ -1170,22 +1170,21 @@
  *  It can be directly put into water without adding a protective tube, ensuring the long-term stability, reliability and accuracy of the sensor.
  * If the water conditions are complex and you want accurate data, you need to wipe the sensor probe frequently.
--
  === 6.5.5 Calibration ===
  For turbidity calibration, you only need to prepare a solution. You can choose 0NTU, 200NTU, 400NTU, 600NTU, 800NTU, 1000NTU, and then enter the corresponding calibration command.
--(% style="color:#4472c4" %)**"AT+CALNTU=0" downlink:0xFE 00        **(%%)0NTU turbidity solution
++(% style="color:#4472c4" %)**"AT+CALNTU=0" downlink:0xFE 00        **(%%)0NTU turbidity solution
--(% style="color:#4472c4" %)**"AT+CALNTU=2" downlink:0xFE 02        **(%%)200NTU turbidity solution
++(% style="color:#4472c4" %)**"AT+CALNTU=2" downlink:0xFE 02        **(%%)200NTU turbidity solution
--(% style="color:#4472c4" %)**"AT+CALNTU=4" downlink:0xFE 04        **(%%)400NTU turbidity solution
++(% style="color:#4472c4" %)**"AT+CALNTU=4" downlink:0xFE 04        **(%%)400NTU turbidity solution
--(% style="color:#4472c4" %)**"AT+CALNTU=6" downlink:0xFE 06        **(%%)600NTU turbidity solution
++(% style="color:#4472c4" %)**"AT+CALNTU=6" downlink:0xFE 06        **(%%)600NTU turbidity solution
--(% style="color:#4472c4" %)**"AT+CALNTU=8" downlink:0xFE 08        **(%%)800NTU turbidity solution
++(% style="color:#4472c4" %)**"AT+CALNTU=8" downlink:0xFE 08        **(%%)800NTU turbidity solution
--(% style="color:#4472c4" %)**"AT+CALNTU=10" downlink:0xFE 0A     **(%%)1000NTU turbidity solution
++(% style="color:#4472c4" %)**"AT+CALNTU=10" downlink:0xFE 0A     **(%%)1000NTU turbidity solution
@@ -1197,232 +1197,21 @@
  *  Do not connect the wires with power on. After the wiring is completed and checked, power can be turned on.
  *  Do not arbitrarily change the components or wires that have been welded at the factory when using the product.
  *  The sensor is a precision device. When using it, please do not disassemble it by yourself or contact the sensor surface with sharp objects or corrosive liquids to avoid damaging the product.
++* Do not power on while connect the cables. Double check the wiring before power on
--Do not power on while connect the cables. Double check the wiring before power on
--== 6.6  Total Solar Radiation sensor ~-~- WSS-06 ==
--
--
--(((
--WSS-06 is Total Radiation Sensor can be used to measure the total solar radiation in the spectral range of 0.3 to 3 μm (300 to 3000 nm). If the sensor face is down, the reflected radiation can be measured, and the shading ring can also be used to measure the scattered radiation.
--)))
--
--(((
--The core device of the radiation sensor is a high-precision photosensitive element, which has good stability and high precision; at the same time, a precision-machined PTTE radiation cover is installed outside the sensing element, which effectively prevents environmental factors from affecting its performance
--)))
--
--(((
--WSS-06 is designed to support the Dragino Weather station solution.  Users only need to connect WSS-06 RS485 interface to WSC1-L. The weather station main processor WSC1-L can detect and upload Total Solar Radiation to the IoT Server via wireless LoRaWAN protocol.
--)))
--
--
--=== 6.6.1  Feature ===
--
--
--* RS485 Total Solar Radiation sensor
--* Measure Total Radiation between 0.3 ~~ 3μm(300 ~~ 3000nm)
--* Measure Reflected Radiation if sense area towards ground.
--
--=== 6.6.2  Specification ===
--
--
--* Input Power: DC 5 ~~ 24v
--* Interface: RS485
--* Detect spectrum: 0.3 ~~ 3μm(300～3000nm)
--* Measure strength range: 0 ~~ 2000W/m2
--* Resolution: 0.1W/m2
--* Accuracy: ±3%
--* Yearly Stability: ≤±2%
--* Cosine response: ≤7% (@ Sun angle 10°)
--* Temperature Effect: ±2% (-10℃ ~~ 40℃)
--* Working Temperature: -40℃ ~~ 70℃
--* Working Humidity: 10 ~~ 90%RH
--* Power Consumption: 4mA @ 12v
--
--=== 6.6.3  Dimension ===
--
--
--[[image:1656057348695-898.png]]
--
--
--=== 6.6.4  Pin Mapping ===
--
--
--[[image:1656057359343-744.png]]
--
--
--=== 6.6.5  Installation Notice ===
--
--
--Do not power on while connect the cables. Double check the wiring before power on.
--
--[[image:1656057369259-804.png]]
--
--[[image:1656057377943-564.png]]
--
--
--== 6.7  PAR (Photosynthetically Available Radiation) ~-~- WSS-07 ==
--
--
--(((
--WSS-07 photosynthetically active radiation sensor is mainly used to measure the photosynthetically active radiation of natural light in the wavelength range of 400-700nm.
--)))
--
--(((
--WSS-07 use precision optical detectors and has an optical filter of 400-700nm, when natural light is irradiated, a voltage signal proportional to the intensity of the incident radiation is generated, and its luminous flux density is proportional to the cosine of the direct angle of the incident light.
--)))
--
--(((
--WSS-07 is designed to support the Dragino Weather station solution. Users only need to connect WSS-07 RS485 interface to WSC1-L. The weather station main processor WSC1-L can detect and upload Photosynthetically Available Radiation to the IoT Server via wireless LoRaWAN protocol.
--)))
--
--
--=== 6.7.1  Feature ===
--
--
--(((
--PAR (Photosynthetically Available Radiation) sensor measure 400 ~~ 700nm wavelength nature light's Photosynthetically Available Radiation.
--)))
--
--(((
--When nature light shine on the sense area, it will generate a signal base on the incidence radiation strength.
--)))
--
--
--=== 6.7.2  Specification ===
--
--
--* Input Power: DC 5 ~~ 24v
--* Interface: RS485
--* Response Spectrum: 400~~700nm
--* Measure range: 0 ~~ 2500μmol/m2•s
--* Resolution: 1μmol/m2•s
--* Accuracy: ±2%
--* Yearly Stability: ≤ ±2%
--* Working Temperature: -30℃ ~~ 75℃
--* Working Humidity: 10 ~~ 90%RH
--* Power Consumption: 3mA @ 12v
--
--=== 6.7.3  Dimension ===
--
--
--[[image:1656057538793-888.png]]
--
--
--=== 6.7.4  Pin Mapping ===
--
--
--[[image:1656057548116-203.png]]
--
--
--=== 6.7.5  Installation Notice ===
--
--
--Do not power on while connect the cables. Double check the wiring before power on.
--
--[[image:1656057557191-895.png]]
--
--[[image:1656057565783-251.png]]
--
--
  = 7.  FAQ =
--== 7.1  What else do I need to purchase to build Weather Station? ==
--Below is the installation photo and structure:
++= 8.  Order Info =
++== 8.1  Main Process Unit ==
--[[image:1656057598349-319.png]]
--
--[[image:1656057608049-693.png]]
--
--
--== 7.2  How to upgrade firmware for WSC1-L? ==
--
--
--(((
--Firmware Location & Change log: [[https:~~/~~/www.dropbox.com/sh/j6uco1uirwqbng1/AAAwGoxamL5xNJR5Z6CTqGXha?dl=0>>https://www.dropbox.com/sh/j6uco1uirwqbng1/AAAwGoxamL5xNJR5Z6CTqGXha?dl=0]]
--)))
--
--(((
--Firmware Upgrade instruction:  [[Firmware Upgrade Instruction>>doc:Main.Firmware Upgrade Instruction for STM32 base products.WebHome||anchor="H2.HardwareUpgradeMethodSupportList"]]
--)))
--
--
--== 7.3  How to change the LoRa Frequency Bands/Region? ==
--
--
--User can follow the introduction for how to [[upgrade image>>||anchor="H7.2HowtoupgradefirmwareforWSC1-L3F"]]. When download the images, choose the required image file for download.
--
--
--== 7.4  Can I add my weather sensors? ==
--
--
--Yes, connect the sensor to RS485 bus and see instruction:  [[add sensors.>>||anchor="H3.3AddorDeleteRS485Sensor"]]
--
--
--== 7.5 Where can i find the modbus command for the WSS sensors? ==
--
--
--See this link for the [[modbus command set>>https://www.dropbox.com/s/rw90apbar029a4w/Weather_Sensors_Modbus_Command_List.xlsx?dl=0]].
--
--
--== 7.6  How to change the data read by the rain gauge? ==
--
--
--Users can run the AT+RAINFALLSWITCH command to query the data of the rain gauge.
--
--AT+RAINFALLSWITCH=10(Range: 3,4,5,6,8,10)
--
--**Rainfall query value:**
--
--3：The total rainfall after the sensor is powered on  (for example  Total rainfall: 166.5mm)
--
--4：Current Hourly rainfall: etc 0.2mm
--
--5：Rainfall in last hour: etc 0.2mm
--
--6：24-hour maximum rainfall: etc  10.0mm
--
--8：24-hour minimum rainfall: etc  0.0mm
--
--10：Rainfall in 24 hours: 8.0mm   (Rainfall in the last 24 hours)
--
--
--= 8.  Trouble Shooting =
--
--== 8.1  AT Command input doesn't work ==
--
--
--(((
--In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
--)))
--
--
--== 8.2  Possible reasons why the device is unresponsive: ==
--
--
--~1. Check whether the battery voltage is lower than 2.8V
--2. Check whether the jumper of the device is correctly connected
--
--[[image:image-20240330173709-1.png]]
--
--
--3. Check whether the switch here of the device is at the ISP(The switch can operate normally only when it is in RUN)
--
--[[image:image-20240330173724-2.png]]
--
--
--= 9.  Order Info =
--
--== 9.1  Main Process Unit ==
--
--
  Part Number: (% style="color:blue" %)**WSC1-L-XX**
  (% style="color:blue" %)**XX**(%%): The default frequency band
@@ -1436,7 +1436,7 @@
  * (% style="color:red" %)**IN865**(%%): LoRaWAN IN865 band
  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
--== 9.2  Sensors ==
++== 8.2  Sensors ==
  (% border="1" cellspacing="3" style="background-color:#f2f2f2; width:500px" %)
@@ -1450,7 +1450,7 @@
  |(% style="width:462px" %)Total Solar Radiation Sensor|(% style="width:120px" %)WSS-06
  |(% style="width:462px" %)PAR (Photosynthetically Available Radiation)|(% style="width:120px" %)WSS-07
--= 10.  Support =
++= 9.  Support =
  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
@@ -1457,7 +1457,7 @@
  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]].
--= 11.  Appendix I: Field Installation Photo =
++= 10.  Appendix I: Field Installation Photo =
  [[image:1656058346362-132.png||height="685" width="732"]]

Changes for page WQS-NB/NS -- NB-IoT Water Quality Sensor Transmitter User Manual

Summary

Details

Applications

Navigation