Version 16.3 by Xiaoling on 2022/09/06 10:15
Show last authors
1 (% class="wikigeneratedid" %)
2 **Table of Contents:**
3
4 {{toc/}}
5
6
7
8
9
10 = 1.  Introduction =
11
12 == 1.1  OverView ==
13
14
15 (((
16 TrackerD is an (% style="color:blue" %)**Open Source LoRaWAN Tracker**(%%) based on (% style="color:blue" %)**ESP32 MCU**(%%) and (% style="color:blue" %)**Semtech LoRa Wireless Chip**.
17 )))
18
19 (((
20 There are various sensors such as GPS, WiFi, BLE, Temperature, Humidity, Motion Detection, and Buzzer in TrackerD. Make it useful for different kinds of applications.
21 )))
22
23 (((
24 TrackerD is program friendly. Developers can use Arduino IDE to customize the software of TrackerD to fit their IoT solution.
25 )))
26
27 (((
28 The LoRa wireless technology used in TrackerD allows the user to send data and reach extremely long ranges at low data-rates.It provides ultra-long range spread spectrum communication and high interference immunity whilst minimising current consumption. It targets professional tracking services.
29 )))
30
31 (((
32 TrackerD is equipped with a (% style="color:blue" %)**1000mAh Li-on rechargeable battery**(%%). Each TrackerD has a worldwide unique OTAA keys to join the LoRaWAN network.
33 )))
34
35 [[image:image-20220906101018-1.png]]
36
37
38 == 1.2  Features ==
39
40
41 * LoRaWAN v1.0.3 Class A protocol.
42 * Frequency Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865/RU864
43 * Track position via GPS / BLE or WiFi
44 * Temperature & Humidity
45 * Motion detection
46 * Built-in Buzzer
47 * AT Commands to change parameters
48 * Remote configure parameters via LoRa Downlink
49 * Uplink on periodically
50 * Datalog feature
51 * Firmware upgradable via program port
52 * Programable via Arduino IDE
53 * 1000mAh li-on rechargeable battery
54
55
56
57
58 == 1.3  Applications ==
59
60
61 * Logistics and Supply Chain Management
62 * Human tracking
63
64
65
66
67 = 2.  Use TrackerD in LoRaWAN network =
68
69
70 == 2.1  LED ==
71
72
73 == 2.2  Button ==
74
75
76 = 3.  Update Firmware =
77
78
79 == 3.1  Method 1: Update BIN file ==
80
81
82 (% style="color:blue" %)**Step1:  **(%%)Connect TrackerD and PC via TypeC cable directly.
83
84
85 (% style="color:blue" %)**Step2:**(%%)  Install CH9102 driver in the PC.
86
87 After installation of the driver and plug in TrackerD, user should be able to see com port in PC's device manager.
88
89
90 (% style="color:blue" %)**Step3：**(%%) Download and Install Flash Tool from :
91
92 [[https:~~/~~/www.espressif.com.cn/en/support/download/other-tools?keys=Flash%2BDownload%2BTools>>url:https://www.espressif.com.cn/en/support/download/other-tools?keys=Flash%2BDownload%2BTools]]
93
94
95 (% style="color:blue" %)**Step4:** (%%) Run Flash Download Tool and configure chip type to ESP32
96
97 [[image:image-20220712083115-1.png||height="238" width="1071"]]
98
99
100 [[image:image-20220712083115-2.png]]
101
102
103 (% style="color:blue" %)**Step5:** (%%) Select the bin file , com port and proper SPI configure. and click Start.
104
105 Bin file can be downloaded from:  [[https:~~/~~/www.dropbox.com/sh/733s8xlwahhqg1d/AABxDz80lBVX_to8zNuUQWFja?dl=0>>url:https://www.dropbox.com/sh/733s8xlwahhqg1d/AABxDz80lBVX_to8zNuUQWFja?dl=0]]
106
107
108 **Users need to use below files:**
109
110 * boot_app0.bin @0e000
111 * ESP_LORA-eeprom-class.bin @ 0x10000
112
113 [[image:image-20220712083115-3.png]]
114
115
116 After upgrade finish, it will shows below:
117
118 [[image:image-20220712083115-4.png]]
119
120
121
122 = 4.  FAQ =
123
124 == 4.1  Where can i find the source files for TrackerD? ==
125
126
127 Software & Hardware Source: [[https:~~/~~/github.com/dragino/TrackerD >>https://github.com/dragino/TrackerD]]
128
129
130
131 = 5.  Order Info =
132
133
134 Part Number: (% style="color:blue" %)**TrackerD-XXX**
135
136 (% style="color:blue" %)**XXX**(%%): The default frequency band
137
138 * (% style="color:red" %)**EU433**(%%): Default frequency band EU433
139 * (% style="color:red" %)**CN470**(%%): Default frequency band CN470
140 * (% style="color:red" %)**EU868**(%%): Default frequency band EU868
141 * (% style="color:red" %)**IN865**(%%): Default frequency band IN865
142 * (% style="color:red" %)**KR920**(%%): Default frequency band KR920
143 * (% style="color:red" %)**AS923**(%%): Default frequency band AS923
144 * (% style="color:red" %)**AU915**(%%): Default frequency band AU915
145 * (% style="color:red" %)**US915**(%%): Default frequency band US915
146
147
148
149 = 6.  Packing Info =
150
151
152 **Package Includes**:
153
154 * TrackerD x 1
155 * Rechargeable cable x 1
156 * Program Cable x 1
157
158 **Dimensions and Weight**:
159
160 * Device Size: 85 x 48 x 15 mm/pcs
161 * Weight: 55g/pcs
162
163
164
165
166 = 7.  Reference =
167
168
169 * [[**Firmware in Bin format**>>https://www.dropbox.com/sh/733s8xlwahhqg1d/AABxDz80lBVX_to8zNuUQWFja?dl=0]]
170 * **[[Source Code>>https://github.com/dragino/TrackerD]] **
171 * [[**Hardware Source**>>https://www.dropbox.com/sh/orwoy6cecb89m4e/AAD37sRuUrvKsHgAJxuVTkB5a?dl=0]]
172
173
174

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0