Wiki source code of TrackerD --
Version 15.1 by Bei Jinggeng on 2022/07/14 17:05
Show last authors
| author | version | line-number | content |
|---|---|---|---|
| 1 | (% class="wikigeneratedid" %) | ||
| 2 | **Table of Contents:** | ||
| 3 | |||
| 4 | {{toc/}} | ||
| 5 | |||
| 6 | |||
| 7 | = Introduction = | ||
| 8 | |||
| 9 | == OverView == | ||
| 10 | |||
| 11 | TrackerD is an Open Source LoRaWAN Tracker based on ESP32 MCU and Semtech LoRa Wireless Chip. | ||
| 12 | |||
| 13 | There are various sensors such as GPS, WiFi, BLE, Temperature, Humidity, Motion Detection, and Buzzer in TrackerD. Make it useful for different kinds of applications. | ||
| 14 | |||
| 15 | TrackerD is program friendly. Developers can use Arduino IDE to customize the software of TrackerD to fit their IoT solution. | ||
| 16 | |||
| 17 | The LoRa wireless technology used in TrackerD allows the user to send data and reach extremely long ranges at low data-rates.It provides ultra-long range spread spectrum communication and high interference immunity whilst minimising current consumption.It targets professional tracking services. | ||
| 18 | |||
| 19 | TrackerD is equipped with a 1000mAh Li-on rechargeable battery. Each TrackerD has a worldwide unique OTAA keys to join the LoRaWAN network. | ||
| 20 | |||
| 21 | |||
| 22 | == Features == | ||
| 23 | |||
| 24 | * LoRaWAN v1.0.3 Class A protocol. | ||
| 25 | * Frequency Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865/RU864 | ||
| 26 | * Track position via GPS / BLE or WiFi | ||
| 27 | * Temperature & Humidity | ||
| 28 | * Motion detection | ||
| 29 | * Built-in Buzzer | ||
| 30 | * AT Commands to change parameters | ||
| 31 | * Remote configure parameters via LoRa Downlink | ||
| 32 | * Uplink on periodically | ||
| 33 | * Datalog feature | ||
| 34 | * Firmware upgradable via program port | ||
| 35 | * Programable via Arduino IDE | ||
| 36 | * 1000mAh li-on rechargeable battery | ||
| 37 | |||
| 38 | == Applications == | ||
| 39 | |||
| 40 | * Logistics and Supply Chain Management | ||
| 41 | * Human tracking | ||
| 42 | |||
| 43 | = Use TrackerD in LoRaWAN network = | ||
| 44 | |||
| 45 | |||
| 46 | == LED == | ||
| 47 | |||
| 48 | |||
| 49 | == Button == | ||
| 50 | |||
| 51 | |||
| 52 | = Update Firmware = | ||
| 53 | |||
| 54 | |||
| 55 | == Method 1: Update BIN file == | ||
| 56 | |||
| 57 | |||
| 58 | (% style="color:blue" %)**Step1: **(%%)Connect TrackerD and PC via TypeC cable directly. | ||
| 59 | |||
| 60 | |||
| 61 | (% style="color:blue" %)**Step2:**(%%) Install CH9102 driver in the PC. | ||
| 62 | |||
| 63 | After installation of the driver and plug in TrackerD, user should be able to see com port in PC's device manager. | ||
| 64 | |||
| 65 | |||
| 66 | (% style="color:blue" %)**Step3：**(%%) Download and Install Flash Tool from : | ||
| 67 | |||
| 68 | [[https:~~/~~/www.espressif.com.cn/en/support/download/other-tools?keys=Flash%2BDownload%2BTools>>url:https://www.espressif.com.cn/en/support/download/other-tools?keys=Flash%2BDownload%2BTools]] | ||
| 69 | |||
| 70 | |||
| 71 | (% style="color:blue" %)**Step4:** (%%) Run Flash Download Tool and configure chip type to ESP32 | ||
| 72 | |||
| 73 | [[image:image-20220712083115-1.png||height="238" width="1071"]] | ||
| 74 | |||
| 75 | |||
| 76 | [[image:image-20220712083115-2.png]] | ||
| 77 | |||
| 78 | |||
| 79 | (% style="color:blue" %)**Step5:** (%%) Select the bin file , com port and proper SPI configure. and click Start. | ||
| 80 | |||
| 81 | Bin file can be downloaded from: [[https:~~/~~/www.dropbox.com/sh/733s8xlwahhqg1d/AABxDz80lBVX_to8zNuUQWFja?dl=0>>url:https://www.dropbox.com/sh/733s8xlwahhqg1d/AABxDz80lBVX_to8zNuUQWFja?dl=0]] | ||
| 82 | |||
| 83 | |||
| 84 | Users need to use below files: | ||
| 85 | |||
| 86 | * boot_app0.bin @0e000 | ||
| 87 | * ESP_LORA-eeprom-class.bin @ 0x10000 | ||
| 88 | |||
| 89 | [[image:image-20220712083115-3.png]] | ||
| 90 | |||
| 91 | |||
| 92 | After upgrade finish, it will shows below: | ||
| 93 | |||
| 94 | [[image:image-20220712083115-4.png]] | ||
| 95 | |||
| 96 | |||
| 97 | |||
| 98 | = FAQ: = | ||
| 99 | |||
| 100 | == Where can i find the source files for TrackerD? == | ||
| 101 | |||
| 102 | Software & Hardware Source: [[https:~~/~~/github.com/dragino/TrackerD >>https://github.com/dragino/TrackerD]] | ||
| 103 | |||
| 104 | |||
| 105 | = Order Info = | ||
| 106 | |||
| 107 | Part Number: **TrackerD-XX** | ||
| 108 | |||
| 109 | **XX**: The default frequency band | ||
| 110 | |||
| 111 | * (% style="color:blue" %)**AS923 :**(%%) LoRaWAN AS923 band | ||
| 112 | * (% style="color:blue" %)**AU915 :**(%%) LoRaWAN AU915 band | ||
| 113 | * (% style="color:blue" %)**EU868 :**(%%) LoRaWAN EU868 band | ||
| 114 | * (% style="color:blue" %)**KR920 :**(%%) LoRaWAN KR920 band | ||
| 115 | * (% style="color:blue" %)**US915 :**(%%) LoRaWAN US915 band | ||
| 116 | * (% style="color:blue" %)**IN865 :**(%%) LoRaWAN IN865 band | ||
| 117 | |||
| 118 | = Packing Info = | ||
| 119 | |||
| 120 | **Package Includes**: | ||
| 121 | |||
| 122 | * TrackerD x 1 | ||
| 123 | * Rechargeable cable x 1 | ||
| 124 | * Program Cable x 1 | ||
| 125 | |||
| 126 | = Reference = | ||
| 127 | |||
| 128 | * [[**Firmware in Bin format**>>https://www.dropbox.com/sh/733s8xlwahhqg1d/AABxDz80lBVX_to8zNuUQWFja?dl=0]] | ||
| 129 | * **[[Source Code>>https://github.com/dragino/TrackerD]] ** | ||
| 130 | * [[**Hardware Source**>>https://www.dropbox.com/sh/orwoy6cecb89m4e/AAD37sRuUrvKsHgAJxuVTkB5a?dl=0]] |