Wiki source code of TrackerD --
Version 12.1 by Edwin Chen on 2022/07/14 00:15
Hide last authors
| author | version | line-number | content |
|---|---|---|---|
 |
7.1 | 1 | (% class="wikigeneratedid" %) |
| 2 | **Table of Contents:** | ||
 |
1.1 | 3 | |
| |
7.1 | 4 | {{toc/}} |
| |
1.1 | 5 | |
| |
2.1 | 6 | |
| |
12.1 | 7 | = Introduction = |
| |
2.1 | 8 | |
| |
12.1 | 9 | == OverView == |
| 10 | |||
| |
8.1 | 11 | TrackerD is an Open Source LoRaWAN Tracker based on ESP32 MCU and Semtech LoRa Wireless Chip. |
| |
7.2 | 12 | |
| |
12.1 | 13 | There are various sensors such as GPS, WiFi, BLE, Temperature, Humidity, Motion Detection, and Buzzer in TrackerD. Make it useful for different kinds of applications. |
| |
7.2 | 14 | |
| |
8.1 | 15 | TrackerD is program friendly. Developers can use Arduino IDE to customize the software of TrackerD to fit their IoT solution. |
| 16 | |||
| 17 | The LoRa wireless technology used in TrackerD allows the user to send data and reach extremely long ranges at low data-rates.It provides ultra-long range spread spectrum communication and high interference immunity whilst minimising current consumption.It targets professional tracking services. | ||
| 18 | |||
| 19 | TrackerD is equipped with a 1000mAh Li-on rechargeable battery. Each TrackerD has a worldwide unique OTAA keys to join the LoRaWAN network. | ||
| 20 | |||
| 21 | |||
| |
12.1 | 22 | == Features == |
| |
8.1 | 23 | |
| |
12.1 | 24 | * LoRaWAN v1.0.3 Class A protocol. |
| 25 | * Frequency Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865/RU864 | ||
| 26 | * Track position via GPS / BLE or WiFi | ||
| 27 | * Temperature & Humidity | ||
| 28 | * Motion detection | ||
| 29 | * Built-in Buzzer | ||
| 30 | * AT Commands to change parameters | ||
| 31 | * Remote configure parameters via LoRa Downlink | ||
| 32 | * Uplink on periodically | ||
| 33 | * Datalog feature | ||
| 34 | * Firmware upgradable via program port | ||
| 35 | * Programable via Arduino IDE | ||
| 36 | * 1000mAh li-on rechargeable battery | ||
| 37 | |||
| 38 | |||
| 39 | == Applications == | ||
| 40 | |||
| 41 | * Logistics and Supply Chain Management | ||
| 42 | * Human tracking | ||
| 43 | |||
| 44 | |||
| 45 | |||
| 46 | |||
| |
7.1 | 47 | = 1. Update Firmware = |
| |
2.1 | 48 | |
| 49 | |||
| |
7.1 | 50 | == 1.1 Method 1: Update BIN file == |
| 51 | |||
| 52 | |||
| 53 | (% style="color:blue" %)**Step1: **(%%)Connect TrackerD and PC via TypeC cable directly. | ||
| 54 | |||
| 55 | |||
| 56 | (% style="color:blue" %)**Step2:**(%%) Install CH9102 driver in the PC. | ||
| 57 | |||
| 58 | After installation of the driver and plug in TrackerD, user should be able to see com port in PC's device manager. | ||
| 59 | |||
| 60 | |||
| 61 | (% style="color:blue" %)**Step3：**(%%) Download and Install Flash Tool from : | ||
| 62 | |||
| 63 | [[https:~~/~~/www.espressif.com.cn/en/support/download/other-tools?keys=Flash%2BDownload%2BTools>>url:https://www.espressif.com.cn/en/support/download/other-tools?keys=Flash%2BDownload%2BTools]] | ||
| 64 | |||
| 65 | |||
| 66 | (% style="color:blue" %)**Step4:** (%%) Run Flash Download Tool and configure chip type to ESP32 | ||
| 67 | |||
| 68 | [[image:image-20220712083115-1.png||height="238" width="1071"]] | ||
| 69 | |||
| 70 | |||
| 71 | [[image:image-20220712083115-2.png]] | ||
| 72 | |||
| 73 | |||
| 74 | (% style="color:blue" %)**Step5:** (%%) Select the bin file , com port and proper SPI configure. and click Start. | ||
| 75 | |||
| 76 | Bin file can be downloaded from: [[https:~~/~~/www.dropbox.com/sh/733s8xlwahhqg1d/AABxDz80lBVX_to8zNuUQWFja?dl=0>>url:https://www.dropbox.com/sh/733s8xlwahhqg1d/AABxDz80lBVX_to8zNuUQWFja?dl=0]] | ||
| 77 | |||
| 78 | |||
| 79 | Users need to use below files: | ||
| 80 | |||
| 81 | * boot_app0.bin @0e000 | ||
| 82 | * ESP_LORA-eeprom-class.bin @ 0x10000 | ||
| 83 | |||
| 84 | [[image:image-20220712083115-3.png]] | ||
| 85 | |||
| 86 | |||
| 87 | After upgrade finish, it will shows below: | ||
| 88 | |||
| 89 | [[image:image-20220712083115-4.png]] | ||
| 90 | |||
| 91 | |||
| 92 | |||
| 93 | = 2. FAQ: = | ||
| 94 | |||
| 95 | == 2.1 Where can i find the source files for TrackerD? == | ||
| 96 | |||
| |
2.1 | 97 | Software & Hardware Source: [[https:~~/~~/github.com/dragino/TrackerD >>https://github.com/dragino/TrackerD]] |
| 98 | |||
| 99 | |||
| |
8.1 | 100 | = Order Info = |
| 101 | |||
| 102 | Part Number: **TrackerD-XX** | ||
| 103 | |||
| 104 | **XX**: The default frequency band | ||
| 105 | |||
| |
10.1 | 106 | * (% style="color:blue" %)**AS923 :**(%%) LoRaWAN AS923 band |
| 107 | * (% style="color:blue" %)**AU915 :**(%%) LoRaWAN AU915 band | ||
| 108 | * (% style="color:blue" %)**EU433 :**(%%) LoRaWAN EU433 band | ||
| 109 | * (% style="color:blue" %)**EU868 :**(%%) LoRaWAN EU868 band | ||
| 110 | * (% style="color:blue" %)**KR920 :**(%%) LoRaWAN KR920 band | ||
| 111 | * (% style="color:blue" %)**US915 :**(%%) LoRaWAN US915 band | ||
| |
11.1 | 112 | * (% style="color:blue" %)**IN865 :**(%%) LoRaWAN IN865 band |
| 113 | * (% style="color:blue" %)**CN470 :**(%%) LoRaWAN CN470 band | ||
| |
8.1 | 114 | |
| 115 | = Packing Info = | ||
| 116 | |||
| 117 | **Package Includes**: | ||
| 118 | |||
| |
11.1 | 119 | * TrackerD x 1 |
| 120 | * Rechargeable cable x 1 | ||
| 121 | * Program Cable x 1 | ||
| |
12.1 | 122 | |
| 123 | |||
| 124 | = Reference = | ||
| 125 | |||
| 126 | * [[**Firmware in Bin format**>>https://www.dropbox.com/sh/733s8xlwahhqg1d/AABxDz80lBVX_to8zNuUQWFja?dl=0]] | ||
| 127 | * **[[Source Code>>https://github.com/dragino/TrackerD]] ** | ||
| 128 | * [[**Hardware Source**>>https://www.dropbox.com/sh/orwoy6cecb89m4e/AAD37sRuUrvKsHgAJxuVTkB5a?dl=0]] |