Skip to Content
Last modified by Xiaoling on 2025/04/27 16:48
From version 84.2
edited by Xiaoling
on 2022/10/24 10:58
Change comment: There is no comment for this version
To version 51.12
edited by Xiaoling
on 2022/09/30 11:57
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -25,14 +25,10 @@
25 25  (((
26 26  In TrackerD, there are various sensors such as GPS, WiFi, BLE, Temperature, Humidity, Motion Detection, and Buzzer. User can use TrackerD for different tracking scenario.
27 27  
28 -(((
29 29  TrackerD is program friendly. Developers can use Arduino IDE to customize the software of TrackerD to fit their IoT solution.
30 -)))
31 31  
32 -(((
33 33  The LoRa wireless technology used in TrackerD allows the user to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption. It targets professional tracking services.
34 34  )))
35 -)))
36 36  
37 37  (((
38 38  TrackerD is equipped with a (% style="color:blue" %)**1000mAh Li-on rechargeable battery**(%%). Each TrackerD has a worldwide unique OTAA keys to join the LoRaWAN network.
... ... @@ -97,8 +97,6 @@
97 97  * LoRa Transmit Mode: 125mA @ 20dBm 44mA @ 14dBm
98 98  * Tracking: max: 38mA
99 99  
100 -
101 -
102 102  == 1.3  Features ==
103 103  
104 104  
... ... @@ -105,7 +105,7 @@
105 105  * LoRaWAN 1.0.3 Class A
106 106  * ESP32 PICO D4
107 107  * SX1276/78 Wireless Chip
108 -* Arduino IDE Compatible
102 +* Arduino IDE Compatible
109 109  * Open source hardware / software
110 110  * Regular/ Real-time GPS,BLE,WIFI tracking
111 111  * Built-in3 axis accelerometer (LIS3DH)
... ... @@ -117,8 +117,6 @@
117 117  * Tri-color LED, Alarm button
118 118  * Datalog
119 119  
120 -
121 -
122 122  == 1.4  Applications ==
123 123  
124 124  
... ... @@ -125,8 +125,6 @@
125 125  * Logistics and Supply Chain Management
126 126  * Human tracking
127 127  
128 -
129 -
130 130  = 2.1 Use TrackerD =
131 131  
132 132  
... ... @@ -189,148 +189,66 @@
189 189  (% style="color:blue" %)**Step 3:**(%%) TrackerD will auto join to the LoRaWAN network. After join success, TrackerD will start to upload message to IoT server.
190 190  
191 191  
182 +(% style="color:blue" %)**Positioning Mode(SMOD):**
192 192  
193 -== 2.3  Positioning Mode(SMOD) ==
184 +* (% style="color:#037691" %)**GPS ONLY(Factory Settings):    **(%%)only get GPS location info.
185 +* (% style="color:#037691" %)**BLE ONLY:              **(%%)Only obtain iBeacon info via BLE. Design for Indoor tracking.
186 +* (% style="color:#037691" %)**GPS/BLE Hybrid:   **(%%)Combination for Indoor and Outdoor tracking.
194 194  
188 +User can switch modes by [[changing SMOD>>||anchor="H3.2.7SetPositioningMode"]].
195 195  
196 -Users can set TrackerD to different Positioning Mode for different applications. Below mod are supported.
197 197  
198 -* (% style="color:#037691" %)**GPS ONLY(Factory Settings):    **(%%)only get and uplink GPS location info.
199 -* (% style="color:#037691" %)**BLE ONLY:              **(%%)Only obtain iBeacon info via BLE and uplink. Design for Indoor tracking.
200 -* (% style="color:#037691" %)**GPS/BLE Hybrid:   **(%%)Combination for Indoor and Outdoor tracking.Devices will try to search BLE iBeacon first. If device can't find the iBeacon, it will use GPS for positioning.
201 201  
202 -Users can switch modes by [[changing SMOD>>||anchor="H3.2.7SetPositioningMode"]].
192 +== 2.3 Uplink Payload ==
203 203  
204 204  
195 +=== 2.3.1 Uplink FPORT~=5, Device Status ===
205 205  
206 -== 2.4  Uplink Payload ==
207 207  
208 208  
209 -=== 2.4.1 Uplink FPORT~=5, Device Status ===
199 +=== 2.3.2 Uplink FPORT~= , Realtime GNSS Positioning ===
210 210  
211 211  
212 -Uplink the device configures with FPORT=5. Once TrackerD Joined the network, it will uplink this message to the server. After the first uplink, TrackerD will uplink Device Status every 12 hours.
202 +The default uplink payload includes totally 11 bytes. (User can use AT+MOD=0 to enable the Temperature and humidity sensor to hum/tem info from accelerometer. When accelerometer info is enable, total payload will be 15 bytes, please note 15 bytes won't work on DR0 on US915/AU915 frequency band. )
213 213  
214 -Use can also get the Device Status uplink through the downlink command: **Downlink:  0x2301**
215 215  
205 +(% border="2" style="background-color:#ffffcc; color:green; width:537px" %)
206 +|(% style="width:69px" %)(((
207 +**Size**
216 216  
217 -(% border="1.5" style="background-color:#ffffcc; color:green; width:520px" %)
218 -|=(% scope="row" style="width: 108px;" %)**Size(bytes)**|=(% style="width: 82px;" %)**1**|=(% style="width: 83px;" %)**2**|=(% style="width: 94px;" %)**1**|=(% style="width: 84px;" %)**1**|=(% style="width: 44px;" %)2|=(% style="width: 63px;" %)**2**|=(% style="width: 60px;" %)1
219 -|=(% style="width: 108px;" %)**Value**|(% style="width:82px" %)Sensor Model|(% style="width:83px" %)Firmware Version|(% style="width:94px" %)Frequency Band|(% style="width:84px" %)Sub-band|(% style="width:44px" %)BAT|(% style="width:63px" %)SMOD|(% style="width:60px" %)Status
209 +**(bytes)**
210 +)))|(% style="width:76px" %)4|(% style="width:87px" %)4|(% style="width:76px" %)2|(% style="width:52px" %)1|(% style="width:88px" %)(((
211 +2
220 220  
221 -[[image:1665301570342-765.png]]
222 -
223 -
224 -(% style="color:#037691" %)**Example of Device Status:**(%%) 13014001FF0FA24002
225 -
226 -(% style="color:#037691" %)**Sensor Model:** (%%) For TrackerD,this value is 0x13
227 -
228 -(% style="color:#037691" %)**Firmware Version: **(%%) 0x0140,Means:v1.4.0 version
229 -
230 -(% style="color:#037691" %)**Frequency Band**:
231 -
232 -*0x01: EU868
233 -
234 -*0x02: US915
235 -
236 -*0x03: IN865
237 -
238 -*0x04: AU915
239 -
240 -*0x05: KZ865
241 -
242 -*0x06: RU864
243 -
244 -*0x07: AS923
245 -
246 -*0x08: AS923-1
247 -
248 -*0x09: AS923-2
249 -
250 -*0x0a: AS923-3
251 -
252 -Sub- Band:value 0x00~~0x08(only forAU915,US915,Others are 0xFF)
253 -
254 -(% style="color:#037691" %)**BAT:**(%%) shows the battery voltage for TrackerD.
255 -
256 -
257 -(% style="color:#037691" %)**Ex1:**(%%) 0x0FA2 = 4002mV
258 -
259 -Use can also get the Device Status uplink through the downlink command:
260 -
261 -
262 -(% style="color:#037691" %)**SMOD Field (total 1 byte)**(%%)：0x40
263 -
264 -(% border="1.5" style="background-color:#ffffcc; color:green; width:420px" %)
265 -|(% style="width:75px" %)**Size(bit)**|(% style="width:64px" %)2bits|(% style="width:137px" %)2bit|(% style="width:142px" %)4bit
266 -|(% style="width:75px" %)**Value**|(% style="width:64px" %)SMOD|(% style="width:137px" %)GPS_Settings|(% style="width:142px" %)BLE_Settings
267 -
268 -(% style="color:blue" %)** SMOD：**
269 -
270 -(% style="color:red" %)** 1 :** (%%) GPS ONLY
271 -
272 -(% style="color:red" %)** 2 :** (%%) BLE ONLY
273 -
274 -(% style="color:red" %)** 3 :**  (%%) GPS/BLE Hybrid
275 -
276 -
277 -(% style="color:blue" %)** GPS_MOD: Define how to send GPS payload**
278 -
279 -(% style="color:red" %)** 0 : ** (%%) Enable uploading on-board Temperature and humidity values
280 -
281 -(% style="color:red" %)** 1 :** (%%) Disable uploading on-board Temperature and humidity values
282 -
283 -
284 -(% style="color:blue" %)** BLE_Settings:**
285 -
286 -(% style="color:red" %)** 1: ** (%%) BLE Positioning with Strongest iBeacon
287 -
288 -
289 -(% style="color:#037691" %)**Status Field (total 1 byte)**(%%):  0x02
290 -
291 -(% border="1.5" style="background-color:#ffffcc; color:green; width:417px" %)
292 -|(% style="width:77px" %)**Size(bit)**|(% style="width:70px" %)5 Bits|(% style="width:92px" %)1 Bit|(% style="width:48px" %)1 Bit|(% style="width:126px" %)1 Bit
293 -|(% style="width:77px" %)**Value**|(% style="width:70px" %)Reserve|(% style="width:92px" %)[[PNACKMD>>||anchor="H2.4.4A0UplinkFPORT3D42CHistoryGNSSPositioning"]]|(% style="width:48px" %)[[LON>>||anchor="H3.2.5Disable2FEnableLEDflash"]]|(% style="width:126px" %)[[Transport Mode>>||anchor="H2.9TransportMode"]]
294 -
295 -
296 -
297 -=== 2.4.2 Uplink FPORT~=2, Realtime GNSS Positioning + Temperature & Humidity ===
298 -
299 -
300 -Users can use **AT+SMOD=1,0,0** to enable uploading on-board Temperature and humidity values, and the total payload will be 15 bytes,
301 -
302 -
303 -(% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:480px" %)
304 -|=(% scope="row" style="width: 50px;" %)(((
305 -**Size(bytes)**
306 -)))|(% style="width:60px" %)4|(% style="width:70px" %)4|(% style="width:80px" %)2|(% style="width:73px" %)1|(% style="width:40px" %)(((
213 +(optional )
214 +)))|(% style="width:83px" %)(((
307 307  2
308 -)))|(% style="width:87px" %)(((
309 -2
216 +
217 +(optional)
310 310  )))
311 -|=(% style="width: 69px;" %)**Value**|(% style="width:76px" %)[[Latitude>>||anchor="HLocationinfo:"]]|(% style="width:87px" %)[[Longitude>>||anchor="HLocationinfo:"]]|(% style="width:76px" %)(((
219 +|(% style="width:69px" %)**Value**|(% style="width:76px" %)[[Latitude>>||anchor="HLocationinfo:"]]|(% style="width:87px" %)[[Longitude>>||anchor="HLocationinfo:"]]|(% style="width:76px" %)(((
312 312  [[Alarm & BAT>>||anchor="HAlarm26BAT:"]]
313 -)))|(% style="width:73px" %)[[FLAG>>||anchor="HFLAG:"]]|(% style="width:40px" %)[[Hum>>||anchor="HHum:"]]|(% style="width:87px" %)[[Tem>>||anchor="HTem:"]]
221 +)))|(% style="width:52px" %)[[FLAG>>||anchor="HFLAG:"]]|(% style="width:88px" %)[[Hum>>||anchor="HHum:"]]|(% style="width:83px" %)[[Tem>>||anchor="HTem:"]]
314 314  
315 -[[image:1665301636888-168.png]]
223 +[[image:1664501958445-288.png]]
316 316  
317 317  
318 -==== (% style="color:blue" %)**Alarm & BAT:**(%%) ====
226 +==== (% style="color:blue" %)Alarm & BAT:(%%) ====
319 319  
320 -(% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:250px" %)
321 -|=(% scope="row" style="width: 50px;" %)**Size(bit)**|(% style="width:50px" %)1 bit|(% style="width:80px" %)1bit|(% style="width:50px" %)14bits
322 -|=(% style="width: 72px;" %)**Value**|(% style="width:67px" %)reserve|(% style="width:118px" %)Alarm Indicate|(% style="width:63px" %)[[BAT>>||anchor="HBAT:"]] 
228 +(% border="2" style="background-color:#ffffcc; color:green; width:329px" %)
229 +|(% style="width:72px" %)**Size(bit)**|(% style="width:67px" %)1 bit|(% style="width:118px" %)1bit|(% style="width:63px" %)14 bits
230 +|(% style="width:72px" %)**Value**|(% style="width:67px" %)reserve|(% style="width:118px" %)Alarm Indicate|(% style="width:63px" %)[[BAT>>||anchor="HBAT:"]] 
323 323  
324 -==== (% style="color:blue" %)**FLAG:**(%%) ====
232 +==== (% style="color:blue" %)FLAG:(%%) ====
325 325  
326 -(% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:250px" %)
327 -|=(% scope="row" style="width: 50px;" %)**Size(bit)**|(% style="width:50px" %)2bits|(% style="width:50px" %)1bit
328 -|=(% style="width: 79px;" %)**Value**|(% style="width:55px" %)[[MOD>>||anchor="H3.2.7SetPositioningMode"]]|(% style="width:47px" %)[[LON>>||anchor="HLON:"]]
234 +(% border="2" style="background-color:#ffffcc; color:green; width:332px" %)
235 +|(% style="width:79px" %)**Size(bit)**|(% style="width:55px" %)2 bits|(% style="width:47px" %)1bit|(% style="width:140px" %)5 bits
236 +|(% style="width:79px" %)**Value**|(% style="width:55px" %)[[MOD>>||anchor="H2.3.4BLEpositioningPayload28Fport229"]]|(% style="width:47px" %)[[LON>>||anchor="HLON:"]]|(% style="width:140px" %)Firmware version 
329 329  
330 330  **Example:** Payload: 0x02863D68 FAC29BAF 4B45 60 0202 011A 
331 331  
332 332  
333 -==== (% style="color:blue" %)**Location info:**(%%) ====
241 +==== (% style="color:blue" %)Location info:(%%) ====
334 334  
335 335  * Latitude: 02863D68  ⇒  //if (0x//02863D68//& 0x80000000 = 0 )~://  //value = 02863D68 /1000000 = 42.351976//
336 336  * Longitude: FAC29BAF  ⇒ //if (0x//FAC29BAF// & 0x80000000 = 1 )~://  //value = (0x//FAC29BAF// – 0x 100000000)/1000000 =//-87.9094//57//
... ... @@ -339,31 +339,35 @@
339 339  
340 340  1.  When power is low (<2.84v), GPS won't be able to get location info and GPS feature will be disabled and the location field will be filled with 0x0FFFFFFF, 0x0FFFFFFF.
341 341  
342 -2.  In this mode, the total payload will be 15 bytes, while US915/AU915 DR0 accepts only 11 bytes payload. In this case, the payload on server will be ignore and shows as below:
250 +2.  In firmware version v1.5, Roll & Pitch is disabled by default.
343 343  
252 +3.  When enable 9-axis motion sensor, the total payload will be 15 bytes, while US915/AU915 DR0 accept only 11 bytes payload. In this case, the payload on server will be ignore and shows as below:
344 344  
254 +
345 345  [[image:1664502116362-706.png]]
346 346  
347 347  
348 -3.  While GPS can't get location info after timeout(FTIME Parameter), the latitude and longitude will be filled with all 0x00:
349 349  
259 +4.  While GPS can't get location info after timeout(FTIME Parameter), the latitude and longitude will be filled with all 0x00:
260 +
350 350  [[image:1664502166010-515.png]]
351 351  
352 352  
353 353  
354 -==== (% style="color:blue" %)**Alarm:**(%%) ====
265 +==== (% style="color:blue" %)Alarm:(%%) ====
355 355  
356 -**Example: ** 0x4B & 0x40 >> 6 = 0x01
357 357  
268 +Example:  0x4B & 0x40 >> 6 = 0x01
358 358  
359 -==== (% style="color:blue" %)**BAT:**(%%) ====
360 360  
361 -**Example: ** 0x4B45 & 0x3FFF ⇒ 2885 (mV).
271 +==== (% style="color:blue" %)BAT:(%%) ====
362 362  
363 -(((
364 -The battery info shows the battery voltage, User can use the below mapping to indicate the battery in percentage: \
365 -)))
366 366  
274 +Example:  0x0CDD & 0x3FFF ⇒ 3293 (mV).
275 +
276 +The battery info shows the current voltage, for (% style="color:blue" %)**TrackerD**(%%) version which powered by li-on battery. User can use below mapping to indicate the battery in percentage: \
277 +
278 +
367 367  * > 4.0v :  80% ~~ 100%
368 368  * 3.85v ~~3.99v:  60% ~~ 80%
369 369  * 3.70v ~~ 3.84v:  40% ~~ 60%
... ... @@ -371,105 +371,46 @@
371 371  * < 3.39v:  0~~20%
372 372  
373 373  
286 +==== (% style="color:blue" %)LON:(%%) ====
374 374  
375 -==== (% style="color:blue" %)**MOD:**(%%) ====
376 -
377 -**Example: ** (0x60>>6) & 0x3f =1
378 -
379 -**Set the format of GPS data uplink link：**
380 -
381 -(% style="color:#037691" %)**0x00:** (%%) Enable uploading on-board Temperature and humidity values
382 -(% style="color:#037691" %)**0x01: ** (%%) Disable uploading on-board Temperature and humidity values
383 -
384 -
385 -**Set the format of BLE data uplink link：**
386 -
387 -(% style="color:#037691" %)**0x01: ** (%%) BLE Positioning with Strongest iBeacon
388 -
389 -
390 -==== (% style="color:blue" %)**LON:**(%%) ====
391 -
392 -**Example:** (0x60>>5) & 0x01=1.
393 -
288 +
394 394  Enable/Disable LED activity for uplink
395 395  
396 -(((
397 -(% style="color:#037691" %)**0x00:**  (%%) Disable LED indicator.
398 -)))
291 +0x00:  Disable LED indicator.
399 399  
400 -(((
401 -(% style="color:#037691" %)**0x01:**  (%%) Enable LED indicator (Default Value)
402 -)))
293 +0x01:  Enable LED indicator (Default Value)
403 403  
404 404  
296 +==== (% style="color:blue" %)Hum:(%%) ====
405 405  
406 -==== (% style="color:blue" %)**Hum:**(%%) ====
407 -
408 408  0202 = //if (0x0202 & 0x8000 = 0 ):  value =// 0x0202 / 100 = +514 ⇒ 51.4 degree
409 409  
410 410  
411 -==== (% style="color:blue" %)**Tem:**(%%) ====
301 +==== (% style="color:blue" %)Tem:(%%) ====
412 412  
413 413  011A =if (0x011A & 0x8000 = 1 ):  value =( 0x011A - 0x10000)/10(dec) ⇒ -//28.2 degree//
414 414  
415 415  
416 416  
417 -=== 2.4.3  Uplink FPORT~=3, Realtime GNSS Positioning (Default Mode) ===
418 418  
308 +=== 2.3.3 Uplink FPORT~= , History GNSS Positioning ===
419 419  
420 -The default uplink payload includes total 11 bytes (**AT+SMOD=1,1,0**). The payload is the first 11 bytes of Uplink FPORT=2, real-time GNSS positioning, (remove the temp and humidity)
421 421  
422 422  
423 -(% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:480px" %)
424 -|=(% scope="row" style="width: 50px;" %)(((
425 -**Size(bytes)**
426 -)))|(% style="width:60px" %)4|(% style="width:70px" %)4|(% style="width:80px" %)2|(% style="width:73px" %)1
427 -|=(% style="width: 69px;" %)**Value**|(% style="width:76px" %)[[Latitude>>||anchor="HLocationinfo:"]]|(% style="width:87px" %)[[Longitude>>||anchor="HLocationinfo:"]]|(% style="width:76px" %)(((
428 -[[Alarm & BAT>>||anchor="HAlarm26BAT:"]]
429 -)))|(% style="width:73px" %)[[FLAG>>||anchor="HFLAG:"]]
312 +=== 2.3.4 BLE positioning Payload(Fport2) ===
430 430  
431 -(% class="wikigeneratedid" %)
432 -[[image:1665301687277-443.png]]
433 433  
315 +Different MODE has different payload:
434 434  
317 +**MODE=2**
435 435  
436 -=== 2.4.4  Uplink FPORT~=4, History GNSS Positioning ===
319 +(% border="2" style="background-color:#ffffcc; color:green; width:491px" %)
320 +|(% style="width:70px" %)(((
321 +**Size**
437 437  
438 -
439 -Set [[PNACKMD=1>>||anchor="H3.2.10A0A0AutoSendNone-ACKmessages"]], and TrackerD will wait for ACK for every uplink, when there is no LoRaWAN network, TrackerD will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
440 -
441 -
442 -(% style="color:red" %)**Note for this mode:**
443 -
444 -* a) TrackerD will do an ACK check for data records sending to make sure every data arrive server.
445 -* b) TrackerD will send data in (% style="color:blue" %)**CONFIRMED Mode**(%%) when PNACKMD=1, but TrackerD won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink, if TrackerD gets an ACK, TrackerD will consider there is a network connection and resend all NONE-ACK Messages.
446 -* c) the total payload will be 15 bytes, while US915/AU915 DR0 accepts only 11 bytes of payload. In this case (DR0 of US915/AU915), the payload on server will show NULL
447 -
448 -The payload is 15 bytes, as below.
449 -
450 -(% border="1.5" style="background-color:#ffffcc; color:green; width:520px" %)
451 -|=(% scope="row" %)(((
452 -**Size(bytes)**
453 -)))|4|4|2|1|1|1|1|1
454 -|=**Value**|Latitude|Longitude|Year|Month|Day|Hous|Min|Sen
455 -
456 -[[image:image-20221009160309-2.png]]
457 -
458 -
459 -
460 -=== 2.4.5  Uplink FPORT~=6, BLE Positioning with Strongest iBeacon ===
461 -
462 -
463 -TrackerD supports BLE scans for indoor positioning. User can set [[**SMOD**>>||anchor="H3.2.7SetPositioningMode"]] to **BLE pure** or **GPS/BLE hybrid** so TrackerD will scan BLE iBeacon and find the strongest iBeacon info and uplink.
464 -
465 -User can set **[[BLEMASK>>||anchor="H3.2.11A0SetBLEMASKtofilterBLEiBeacon"]]** so TrackerD will only search the iBeacons which have UUID that match the BLEMASK settings.
466 -
467 -
468 -(% border="1.5" cellspacing="3" style="background-color:#ffffcc; color:green; width:450px" %)
469 -|=(% scope="row" style="width: 60px;" %)(((
470 -**Size(bytes)**
471 -)))|(% style="width:30px" %)16|(% style="width:50px" %)4|(% style="width:50px" %)4|(% style="width:120px" %)2|(% style="width:50px" %)4|(% style="width:50px" %)2|(% style="width:30px" %)1
472 -|=(% style="width: 50px;" %)**Value**|(% style="width:44px" %)[[UUID>>||anchor="HLocationinfo:"]]|(% style="width:61px" %)(((
323 +**(bytes)**
324 +)))|(% style="width:44px" %)16|(% style="width:61px" %)4|(% style="width:63px" %)4|(% style="width:71px" %)2|(% style="width:50px" %)4|(% style="width:47px" %)2|(% style="width:15px" %)1
325 +|(% style="width:70px" %)**Value**|(% style="width:44px" %)[[UUID>>||anchor="HLocationinfo:"]]|(% style="width:61px" %)(((
473 473  iBeacon MAJOR
474 474  )))|(% style="width:63px" %)(((
475 475  iBeacon MINOR
... ... @@ -481,10 +481,11 @@
481 481  [[Alarm & BAT>>||anchor="HAlarm26BAT:"]]
482 482  )))|(% style="width:15px" %)[[FLAG>>||anchor="HFLAG:"]]
483 483  
337 +
484 484  [[image:1664502425687-834.png]]
485 485  
486 486  
487 -* (% style="color:#037691" %)**BAT: ** (%%) Ex1:0x4B45 & 0x3FFF ⇒ 3901 (mV).
341 +* (% style="color:#037691" %)**BAT: ** (%%) Ex1: 0x4B45 & 0x3FFF ⇒ 3901 (mV).
488 488  * (% style="color:#037691" %)**MODE:   **(%%)Define the payload format.
489 489  * (% style="color:#037691" %)**UUID:     **(%%)The uuid from the strongest iBeacon.
490 490  * (% style="color:#037691" %)**MAJOR:** (%%) The MAJOR from the strongest iBeacon.
... ... @@ -494,7 +494,7 @@
494 494  
495 495  
496 496  
497 -=== 2.4.6  Add Payload format in TTN V3 ===
351 +=== 2.3.5 Add Payload format in TTN V3 ===
498 498  
499 499  
500 500  In TTN V3, use can add a custom payload so it shows friendly.
... ... @@ -505,9 +505,8 @@
505 505  [[image:1664502649601-895.png]]
506 506  
507 507  
508 -Add the decoder from this link: 
362 +Add the decoder from this link:
509 509  
510 -[[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/TrackerD>>https://github.com/dragino/dragino-end-node-decoder/tree/main/TrackerD]]
511 511  
512 512  Save the change the uplink message will be parsed. As below:
513 513  
... ... @@ -515,84 +515,57 @@
515 515  
516 516  
517 517  
518 -== 2.5 Integrate with Datacake ==
371 +== 2.4 Integrate with Datacake ==
519 519  
373 +
520 520  After TrackerD sends data to LoRaWAN server such as TTN, use can pass the data to Datacake and plot out, currently only support GPS plot.
521 521  
522 522  Instruction is here:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20Data%20Cake/#H7.Example~~-~~-AddTrackerDGPSTrackingInDataCake>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20Data%20Cake/#H7.Example--AddTrackerDGPSTrackingInDataCake]]
523 523  
378 +
524 524  [[image:1664502695771-538.png]]
525 525  
526 526  
527 527  
528 -== 2.6 Integrate with Tago ==
383 +== 2.5 Integrate with Tago ==
529 529  
530 530  
386 +After TrackerD sends data to LoRaWAN server such as TTN, use can pass the data to Datacake and plot out, currently only support GPS plot.
531 531  
532 -After TrackerD sends data to LoRaWAN server such as TTN, user can pass the data to Datacake and plot out, currently only support GPS plot.
533 -
534 534  Instruction is here: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Tago.IO/#H3.A0Example-CreateTrackerD2FLGT92positioningwidget>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Tago.IO/#H3.A0Example-CreateTrackerD2FLGT92positioningwidget]]
535 535  
536 536  
537 -
538 538  [[image:1664502715371-321.png]]
539 539  
540 540  
541 541  
542 -== 2.7  Datalog Feature ==
395 +== 2.6 Alarm Mode ==
543 543  
544 544  
545 -total 273 entries,by default,
546 -
547 -User can set [[PNACKMD=1>>||anchor="H3.2.10A0A0AutoSendNone-ACKmessages"]], to enable Datalog feature.
548 -
549 -Example use case.
550 -
551 -[[image:image-20221009234703-2.png||height="328" width="899"]]
552 -
553 -
554 -[[image:image-20221009234629-1.png||height="390" width="577"]]
555 -
556 -
557 -
558 -== 2.8 Alarm Mode ==
559 -
560 -
561 -(((
562 562  User can push the (% style="color:red" %)**RED button**(%%) by more than 5 seconds to enter Alarm Mode.
563 -)))
564 564  
565 565  
566 -(((
567 -Once enter Alarm mode, the (% style="color:green" %)**GREEN LED**(%%) will flash 3 times, the buzzer will alarm for 5 seconds, then TrackerD will immediately send a packet without location info and then send a data packet with GPS positioning information. After that, the device will send 60 packets at 1-minute intervals. The Alarm flag in the payload will be set for the next 60 packets unless exits alert mode.
568 -)))
401 +Once enter Alarm mode, the (% style="color:green" %)**GREEN LED**(%%) will flash 3 times, the buzzer will alarm for 5 seconds, then TrackerD will immediately send a packet without location info and then send a data packet with GPS positioning information. After that, the device will send 60 packets at 1-minute intervals. The Alarm flag in the payload will be set for the next 60 packets unless exit alert mode.
569 569  
570 570  
571 -(((
572 572  Two ways to exit alarm mode:
573 -)))
574 574  
575 -* Server sends a downlink command to exit.
406 +* Server send a downlink command to exit.
576 576  * User fast press the RED button 10 times.
577 577  
578 -(((
579 579  When exit alarm mode, (% style="color:red" %)**RED LED**(%%) will light up for 5 seconds, indicating that the alarm mode is exited. And the alert flag will be set to false.
580 -)))
581 581  
582 582  
583 583  
584 -== 2.9 Transport Mode ==
413 +== 2.7 Sports Mode ~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-- ==
585 585  
586 586  
587 -In Transport Mode, TrackerD will check if there is motion. If there is no motion, device will send uplinks every 20 minutes. If there is motion, device will send uplink every 5 minutes.
588 588  
417 +== 2.8 LED Status ==
589 589  
590 590  
591 -== 2.10 LED Status ==
592 -
593 -
594 -(% border="1.5" style="background-color:#ffffcc; color:green; width:500px" %)
595 -|=(% style="width: 150px;" %)**Event**|=(% style="width: 200px;" %)**Action**|=(% style="width: 150px;" %)**AT+LON to control on/off**
420 +(% border="2" style="background-color:#ffffcc; color:green; width:636px" %)
421 +|(% style="width:157px" %)**Event**|(% style="width:271px" %)**Action**|(% style="width:202px" %)**AT+LON to control on/off**
596 596  |(% style="width:157px" %)**Power On**|(% style="width:271px" %)(% style="color:blue" %)**BLUE, **(% style="color:red" %)**RED , **(% style="color:green" %)**Green** flash once|(% style="width:202px" %)N/A
597 597  |(% style="width:157px" %)**Join request**|(% style="width:271px" %)(% style="color:green" %)**Green** (%%)led fast blink once (200ms)|(% style="width:202px" %)Yes
598 598  |(% style="width:157px" %)**Join Success**|(% style="width:271px" %)(% style="color:green" %)**Green**(%%) led on 5 second|(% style="width:202px" %)N/A
... ... @@ -607,11 +607,12 @@
607 607  
608 608  
609 609  
610 -== 2.11 Button Function ==
611 611  
437 +== 2.9 Button Function ==
612 612  
613 -(% style="color:blue" %)**RESET button:**
614 614  
440 +(% style="color:green" %)**RESET button:**
441 +
615 615  [[image:1664502835802-546.png]]
616 616  
617 617  Push this button will reboot the device. Device will exit alarm mode and re-join to LoRaWAN server.
... ... @@ -622,17 +622,15 @@
622 622  [[image:1664502854406-763.png]]
623 623  
624 624  
625 -(% border="1.5" style="background-color:#ffffcc; color:green; width:520px" %)
626 -|=(% style="width: 100px;" %)**Function**|=(% style="width: 210px;" %)**Action**|=(% style="width: 210px;" %)**Description**
452 +(% border="2" style="background-color:#ffffcc; color:green; width:627px" %)
453 +|(% style="width:135px" %)**Function**|(% style="width:220px" %)**Action**|(% style="width:265px" %)**Description**
627 627  |(% style="width:135px" %)Send Alarm|(% style="width:220px" %)Keep Pressing (% style="color:red" %)**RED**(%%) button for more than 5 seconds|(% style="width:265px" %)Enter Alarm Mode.  See [[Alarm Mode>>||anchor="H2.6AlarmMode"]]
628 628  |(% style="width:135px" %)Exit Alarm Mode|(% style="width:220px" %)Fast press the (% style="color:red" %)**RED** (%%)button 10 times|(% style="width:265px" %)Exit Alarm Mode
629 629  |(% style="width:135px" %)Enter Deep Sleep Mode|(% style="width:220px" %)Press and hold the button for 10 seconds, then quickly press the device 3 times to enter deep sleep|(% style="width:265px" %)This is the mode ship out from factory. CPU will be complete in sleep mode and no LoRa activity, only use before deploy.
630 630  
458 +== 2.10 USB Port Function ==
631 631  
632 632  
633 -== 2.12 USB Port Function ==
634 -
635 -
636 636  The USB interface of TrackerD has below functions:
637 637  
638 638  * Power on the device
... ... @@ -647,7 +647,7 @@
647 647  
648 648  User can configure TrackerD via AT Command or LoRaWAN Downlink.
649 649  
650 -LoRaWAN Downlink instruction for different platforms:  [[IoT LoRaWAN Server>>doc:Main.WebHome]]
475 +LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>doc:Main.WebHome]]
651 651  
652 652  
653 653  
... ... @@ -666,9 +666,11 @@
666 666  [[image:1664503022490-662.png]]
667 667  
668 668  
494 +
669 669  [[image:1664503035713-500.png]]
670 670  
671 671  
498 +
672 672  [[image:1664503047675-651.png]]
673 673  
674 674  
... ... @@ -681,16 +681,16 @@
681 681  
682 682  Set device uplink interval.
683 683  
684 -* (% style="color:blue" %)**AT Command:**
511 +* (% style="color:blue" %)AT Command:
685 685  
686 -(% style="color:#037691" %)**AT+TDC=xxx **
513 +(% style="color:#037691" %)AT+TDC=xxx
687 687  
688 688  Example:  AT+TDC=300000. Means set interval to 5 minutes(300 seconds)
689 689  
690 690  
691 -* (% style="color:blue" %)**Downlink Payload (prefix 0x01):**
518 +* (% style="color:blue" %)Downlink Payload (prefix 0x01):
692 692  
693 -(% style="color:#037691" %)**0x01 00 01 2C**  (%%) ~/~/  Same as AT+TDC=300000
520 +(% style="color:#037691" %)0x01 00 01 2C  (%%)   ~/~/  Same as AT+TDC=300000
694 694  
695 695  
696 696  
... ... @@ -699,34 +699,34 @@
699 699  
700 700  Set alarm packet transmit interval
701 701  
702 -* (% style="color:blue" %)**AT Command:**
529 +* (% style="color:blue" %)AT Command:
703 703  
704 -(% style="color:#037691" %)**AT+ATDC=xx. **
531 +(% style="color:#037691" %)AT+ATDC=xx.
705 705  
706 706  Example:  AT+ATDC=60000  **~-~->    ** Set Alarm Packet Interval to 60 seconds. TrackerD will send every 60 seconds in Alarm mode, Default Value: 60000
707 707  
708 708  
709 -* (% style="color:blue" %)**Downlink Payload (prefix 0xB1):**
536 +*(% style="color:blue" %) Downlink Payload (prefix 0xB1):
710 710  
711 -(% style="color:#037691" %)**0xB1 00 00 3C ** (%%) ~/~/  Same as AT+ATDC=60000
538 +(% style="color:#037691" %)0xB1 00 00 3C  (%%) ~/~/  Same as AT+ATDC=60000
712 712  
713 713  
714 714  
715 -=== 3.2.3 Set Transport Mode Packet transmission interval ===
542 +=== 3.2.3 Set Sports Mode Packet transmission interval ===
716 716  
717 717  
718 -Set Transport Mode packet transmit interval
545 +Set sports packet transmit interval
719 719  
720 -* (% style="color:blue" %)**AT Command:**
547 +* (% style="color:blue" %)AT Command:
721 721  
722 -(% style="color:#037691" %)**AT+MTDC=xx. **
549 +(% style="color:#037691" %)AT+MTDC=xx.
723 723  
724 -Example:  AT+MTDC=300000  **~-~->    ** Set Transport Mode Packet Interval to 300 seconds. TrackerD will send every 300 seconds in Transport mode, Default Value: 300000
551 + Example:  AT+MTDC=300000  **~-~->    ** Set Sports Mode Packet Interval to 300 seconds. TrackerD will send every 300 seconds in Sports mode, Default Value: 300000
725 725  
726 726  
727 -* (% style="color:blue" %)**Downlink Payload (prefix 0x03):**
554 +*(% style="color:blue" %) Downlink Payload (prefix 0x03):
728 728  
729 -(% style="color:#037691" %)**0x03 00 01 2C**  (%%) ~/~/  Same as AT+ MTDC=3000000
556 +(% style="color:#037691" %)0x03 00 01 2C  (%%) ~/~/  Same as AT+ MTDC=3000000
730 730  
731 731  
732 732  
... ... @@ -735,47 +735,48 @@
735 735  
736 736  Server send downlink command to exit Alarm mode
737 737  
738 -* (% style="color:blue" %)**AT Command: No AT Command**
565 +* (% style="color:blue" %)AT Command: No AT Command
739 739  
740 -* (% style="color:blue" %)**Downlink Payload (prefix 0x02):**
741 741  
742 -(% style="color:#037691" %)**0x02 01**    (%%) ~/~/  Exit Alarm Mode
568 +* (% style="color:blue" %)Downlink Payload (prefix 0x02):
743 743  
570 +(% style="color:#037691" %)0x02 01  (%%) ~/~/  Exit Alarm Mode
744 744  
745 745  
573 +
746 746  === 3.2.5 Disable/Enable LED flash ===
747 747  
748 748  
749 749  Disable/Enable LED for position, downlink and uplink
750 750  
751 -* (% style="color:blue" %)**AT Command:**
579 +* (% style="color:blue" %)AT Command:
752 752  
753 -(% style="color:#037691" %)**AT+LON=xx.  (Disable (0), Enable (1), default:1)**
581 +(% style="color:#037691" %)AT+LON=xx.  (Disable (0), Enable (1), default:1)
754 754  
755 -Example: AT+LON=0  **~-~-> ** Disable LED for position, downlink and uplink.
583 + Example: AT+LON=0  **~-~-> ** Disable LED for position, downlink and uplink.
756 756  
757 757  
758 -* (% style="color:blue" %)**Downlink Payload (prefix 0xAE):**
586 +* (% style="color:blue" %)Downlink Payload (prefix 0xAE):
759 759  
760 -(% style="color:#037691" %)**0xAE 00 ** (%%) ~/~/  Same as AT+LON=0
588 +(% style="color:#037691" %)0xAE 00  (%%) ~/~/  Same as AT+LON=0
761 761  
762 762  
763 763  
764 -=== 3.2.6 Disable/Enable Transport Mode ===
592 +=== 3.2.6 Disable/Enable movement detect (Debug Only) ===
765 765  
766 766  
767 -Users can use this feature to enable/disable Transport Mode.
595 +User can use this feature to check and set thread hole of movement detect
768 768  
769 -* (% style="color:blue" %)**AT Command:**
597 +* (% style="color:blue" %)AT Command:
770 770  
771 -(% style="color:#037691" %)**AT+INTWK=xx.  (Disable (0), Enable (1), default:0)**
599 +(% style="color:#037691" %)AT+INTWK=xx.  (Disable (0), Enable (1), default:0)
772 772  
773 -Example:  AT+ INTWK =1  **~-~->   ** Enable Transport Mode.
601 + Example:  AT+ INTWK =1  **~-~->   ** Enable detect movement.
774 774  
775 775  
776 -* (% style="color:blue" %)**Downlink Payload (prefix 0xAF):**
604 +* (% style="color:blue" %)Downlink Payload (prefix 0xAF):
777 777  
778 -(% style="color:#037691" %)**0xAF 01 ** (%%) ~/~/  Same as AT+ INTWK =1
606 +(% style="color:#037691" %)0xAF 01  (%%) ~/~/  Same as AT+ INTWK =1
779 779  
780 780  
781 781  
... ... @@ -782,41 +782,38 @@
782 782  === 3.2.7 Set Positioning Mode ===
783 783  
784 784  
785 -SMOD define how TrackerD scan and uplink data:
613 +SMOD define the how TrackerD scan and uplink date.
786 786  
615 +GPS室外定位模式：  设备默认模式，设备入网后会发送device当前模式下的信息，随后立即定位发送数据包（默认是3分钟定位，超过将发送无效数据），如果出现意外情况下，快速按键3下，将会发出报警消息（默认每分钟发送一次）。GPS还有一种logdata模式，在断网的情况下将数据存储下来，等到有网的时候，一次将数据以每10秒上报。
787 787  
788 -* (% style="color:blue" %)**AT Command:**
617 +BLE室内定位模式：  设备入网后会发送device当前模式下的信息，随后立即定位发送数据包（默认是5秒，超过将发送无效数据），如果出现意外情况下，快速按键3下，将会发出报警消息（默认每3分钟发送一次）。
789 789  
790 -(% style="color:#037691" %)**AT+SMOD=aa,bb,cc**
619 +GPS和BLE混动模式：设备入网后会发送device当前模式下的信息，随后立即判断是否在室内，如果是就进行BLE定位，不是就GPS定位。如果出现意外情况下，快速按键3下，将会发出报警消息（默认每分钟发送一次）。
791 791  
792 -(% style="color:#037691" %)** aa:**
621 +运动模式：  设备入网后会发送device当前模式下的信息，随后发送GPS定位数据，设备判断是否在运动，没有运动传感器没有检测到动作，立即进入静止状态（默认20分钟），如果产生运动，将每5分钟发送一次数据，再第五分钟后检测设备有误运动，无将切换到静止状态，有立即发送数据。
793 793  
794 -* (% style="color:red" %)**1: GPS ONLY(Factory Settings):    **(%%)only get and uplink GPS location info.
795 -* (% style="color:red" %)**2: BLE ONLY:              **(%%)Only obtain iBeacon info via BLE and uplink. Design for Indoor tracking.
796 -* (% style="color:red" %)**3: GPS/BLE Hybrid:   **(%%)Combination for Indoor and Outdoor tracking.Devices will try to search BLE iBeacon first. If device can't find the iBeacon, it will use GPS for positioning.
797 797  
798 -(% style="color:#037691" %)**bb:**
799 799  
800 -* (% style="color:red" %)**0 :  **(%%)GPS+ BAT+ State+Tem&Hum
801 -* (% style="color:red" %)**1 :**(%%)  GPS +BAT State
625 +* (% style="color:blue" %)AT Command:
802 802  
803 -(% style="color:#037691" %)**cc:   **
627 +(% style="color:#037691" %)AT+SMOD=xx.
804 804  
805 -* (% style="color:red" %)**1 : **(%%) (iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State  
806 806  
807 -(% style="color:blue" %)**Example:**
630 + **Example:**
808 808  
809 - AT+ SMOD =1,0,0 ~-~->  GPS+ BAT+ State+Tem&Hum
810 - AT+ SMOD =1,1,0 ~-~->  GPS +BAT State
811 - AT+ SMOD =2,0,1 ~-~->  (iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State
632 + AT+ SMOD =1,0  **~-~-> ** GPS+ BAT+ State+Tem&Hum
812 812  
634 + AT+ SMOD =1,1    **~-~->**  GPS +BAT State
813 813  
814 -* (% style="color:blue" %)**Downlink Payload (prefix 0xA5):**
636 + AT+ SMOD =2,3    **~-~->**  (iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State。
815 815  
816 -(% style="color:#037691" %)**0xA5 01 00 00**    (%%) ~/~/  Same as AT+ SMOD =1,0,0
817 817  
639 +* (% style="color:blue" %)Downlink Payload (prefix 0xA5):
818 818  
641 +(% style="color:#037691" %)0xA5 01 00  (%%) ~/~/  Same as AT+ SMOD =1,0
819 819  
643 +
644 +
820 820  === 3.2.8 Set MAX GPS position time ===
821 821  
822 822  
... ... @@ -826,20 +826,20 @@
826 826  If AT+FTIME=0. The GPS module will be always powered and positioning. This will highly increase the power consumption (up to 50mA). When AT+FTIME=0, it will improve fix accuracy and shorten the acquire time for next uplink.
827 827  
828 828  
829 -* (% style="color:blue" %)**AT Command:**
654 +* (% style="color:blue" %)AT Command:
830 830  
831 -(% style="color:#037691" %)**AT+FTIME=xx**  (%%) **~-~-> ** Set to use xx as max fix time.
656 +(% style="color:#037691" %)AT+FTIME=xx  (%%) **~-~-> ** Set to use xx as max fix time.
832 832  
833 -**Example:**  AT+FTIME=150
658 +Example:  AT+FTIME=150
834 834  
835 835  
836 -* (% style="color:blue" %)**Downlink Payload (prefix 0xAA):**
661 +* (% style="color:blue" %)Downlink Payload (prefix 0xAA):
837 837  
838 -(% style="color:#037691" %)**0xAA 00 96 ** (%%) ~/~/  Set AT+FTIME=150
663 +(% style="color:#037691" %)0xAA 00 96  (%%) ~/~/  Set AT+FTIME=150
839 839  
840 840  
841 841  
842 -=== 3.2.9 Set PDOP value for GPS fix accuracy ===
667 +=== 3.3.9 Set PDOP value for GPS fix accuracy ===
843 843  
844 844  
845 845  PDOP(Position Dilution of Precision) filter, TrackerD will only accept GPS data with a lower PDOP value than pre-configure PDOP value. If device can't get a valid GPS packet within FTIME timeout, it will use the GPS data with lowest PDOP value to server.
... ... @@ -848,26 +848,26 @@
848 848  A GPS packet with lower PDOP has higher accuracy. PDOP default value is 2.0
849 849  
850 850  
851 -* (% style="color:blue" %)**AT Command:**
676 +* (% style="color:blue" %)AT Command:
852 852  
853 -(% style="color:#037691" %)**AT+PDOP=2.5 ** (%%) **~-~->  ** Set PDOP to 2.5
678 +(% style="color:#037691" %)AT+PDOP=2.5  (%%) **~-~->  ** Set PDOP to 2.5
854 854  
855 855  
856 -* (% style="color:blue" %)**Downlink Payload (prefix 0xAD):**
681 +* (% style="color:blue" %)Downlink Payload (prefix 0xAD):
857 857  
858 -(% style="color:#037691" %)**0xAD 00 0A**   (%%) ~/~/  Set AT+PDOP=1  (0x0A / 10 =1)
683 +(% style="color:#037691" %)0xAD 00 0A  (%%) ~/~/  Set AT+PDOP=1  (0x0A / 10 =1)
859 859  
860 -(% style="color:#037691" %)**0xAD 00 19**   (%%) ~/~/  Set AT+PDOP=2.5    (0x19 / 10 =2.5)
685 +(% style="color:#037691" %)0xAD 00 19  (%%) ~/~/  Set AT+PDOP=2.5    (0x19 / 10 =2.5)
861 861  
862 -(% style="color:#037691" %)**0xAD 00 46**    (%%) ~/~/  Set AT+PDOP=7  (0x46 / 10 =7)
687 +(% style="color:#037691" %)0xAD 00 46  (%%) ~/~/  Set AT+PDOP=7  (0x46 / 10 =7)
863 863  
864 864  
865 865  
866 866  Disable/Enable the confirmation mode
867 867  
868 -* (% style="color:blue" %)**AT Command:**
693 +* (% style="color:blue" %)AT Command:
869 869  
870 -(% style="color:#037691" %)**AT+CFM=xx**
695 +(% style="color:#037691" %)AT+CFM=xx.
871 871  
872 872  
873 873  **~ Example:**
... ... @@ -877,52 +877,12 @@
877 877   AT+ CFM=1    **~-~->  ** Enable confirmation
878 878  
879 879  
880 -* (% style="color:blue" %)**Downlink Payload (prefix 0x05):**
705 +* (% style="color:blue" %)Downlink Payload (prefix 0x05):
881 881  
882 -(% style="color:#037691" %)**0x05 01 **(%%) ~/~/  Same as AT+ SMOD =1
707 +(% style="color:#037691" %)0x05 01 (%%)  ~/~/  Same as AT+ SMOD =1
883 883  
884 884  
885 885  
886 -=== 3.2.10  Auto Send None-ACK messages ===
887 -
888 -
889 -TrackerD will wait for ACK for each uplink, If TrackerD doesn't get ACK from the IoT server, it will consider the message doesn't arrive server and store it. TrackerD keeps sending messages in normal periodically. Once TrackerD gets ACK from a server, it will consider the network is ok and start to send the not-arrive message.
890 -
891 -
892 -* (% style="color:blue" %)**AT Command: AT+PNACKMD**
893 -
894 -The default factory setting is 0.
895 -
896 -
897 -**Command Example Function Response:**
898 -
899 -(% style="color:#037691" %)**AT+PNACKMD=1**  (%%) ~/~/  Poll None-ACK message OK
900 -
901 -
902 -* (% style="color:blue" %)**Downlink Command: 0x34**
903 -
904 -Example: 0x3401  ~/~/  Same as AT+PNACKMD=1
905 -
906 -
907 -
908 -=== 3.2.11  Set BLEMASK to filter BLE iBeacon ===
909 -
910 -
911 -BLEMASK is to filter the unwanted BLE iBeacons during scan. For example, if BLEMASK is 123456. LBT1 will only uplink UUID info which includes 123456. It will ignore all other iBeacons which doesn’t contact 123456 in the UUID.
912 -
913 -Note: BLEMASK range is 6 ~~ 10 bytes. If AT+BLEMASK < 6 bytes, BLEMASK will be disabled.
914 -
915 -(% style="color:blue" %)**AT Command:**(%%)
916 - AT+BLEMASK=123456     ~/~/ Set BLEMASK = 123456
917 - AT+BLEMASK=0  ~/~/ disable BLEMASK
918 -
919 -
920 -(% style="color:blue" %)**Downlink Payload: (Prefix : 0xA5)**(%%)
921 -Example:
922 -0xA5010203040506    ~/~/ Set BLEMASK to 123456
923 -
924 -
925 -
926 926  = 4. Setting for Different Scenarios =
927 927  
928 928  
... ... @@ -951,9 +951,11 @@
951 951  After installation of the driver and plug in TrackerD, user should be able to see com port in PC's device manager.
952 952  
953 953  
954 -(% style="color:blue" %)**Step3:  **(%%)Download and Install Flash Tool:  [[https:~~/~~/www.espressif.com.cn/en/support/download/other-tools?keys=Flash%2BDownload%2BTools>>url:https://www.espressif.com.cn/en/support/download/other-tools?keys=Flash%2BDownload%2BTools]]
739 +(% style="color:blue" %)**Step3：**(%%) Download and Install Flash Tool:
955 955  
741 +[[https:~~/~~/www.espressif.com.cn/en/support/download/other-tools?keys=Flash%2BDownload%2BTools>>url:https://www.espressif.com.cn/en/support/download/other-tools?keys=Flash%2BDownload%2BTools]]
956 956  
743 +
957 957  (% style="color:blue" %)**Step4:** (%%) Run Flash Download Tool and configure chip type to ESP32
958 958  
959 959  
... ... @@ -963,21 +963,9 @@
963 963  [[image:1664503574618-659.png]]
964 964  
965 965  
966 -Find the path of SP32 installation, find the file as shown in Figure 1, and change the SPI pin to the shown in Figure 2.
967 -
968 -[[image:image-20221024105643-1.png]]
969 -
970 - Figure1
971 -
972 -
973 -[[image:image-20221024105643-2.png]]
974 -
975 - Figure2
976 -
977 -
978 978  (% style="color:blue" %)**Step5:** (%%) Select the firmware file (.bin format), com port and proper SPI configure. Clink Start. Bin file location:
979 979  
980 -[[https:~~/~~/github.com/dragino/TrackerD/releases>>https://github.com/dragino/TrackerD/releases]]
755 +[[https:~~/~~/www.dropbox.com/sh/733s8xlwahhqg1d/AABxDz80lBVX_to8zNuUQWFja?dl=0>>url:https://www.dropbox.com/sh/733s8xlwahhqg1d/AABxDz80lBVX_to8zNuUQWFja?dl=0]]
981 981  
982 982  
983 983  Users need to use below files:
... ... @@ -1006,22 +1006,21 @@
1006 1006  === 6.1.1 Set up ARDUINO compile environment ===
1007 1007  
1008 1008  
1009 -* **Download the latest Arduino software (IDE) from the Arduino official website:  [[https:~~/~~/www.arduino.cc/en/Main/Software>>url:https://www.arduino.cc/en/Main/Software]]**
784 +* Download the latest Arduino software (IDE) from the Arduino official website:  [[https:~~/~~/www.arduino.cc/en/Main/Software>>url:https://www.arduino.cc/en/Main/Software]]
1010 1010  
1011 -Install IDE on PC, open and click (% style="color:#037691" %)**File ~-~-> Preference**,(%%) add the following URL:  [[https:~~/~~/dl.espressif.com/dl/package_esp32_index.json>>url:https://links.jianshu.com/go?to=https%3A%2F%2Fdl.espressif.com%2Fdl%2Fpackage_esp32_index.json]]
786 +Install IDE on PC, open and click **File ~-~-> Preference**, add the following URL:  [[https:~~/~~/dl.espressif.com/dl/package_esp32_index.json>>url:https://links.jianshu.com/go?to=https%3A%2F%2Fdl.espressif.com%2Fdl%2Fpackage_esp32_index.json]]
1012 1012  
1013 1013  
1014 1014  [[image:1664503635019-941.png]]
1015 1015  
1016 1016  
792 +* Go to tools ~-~-> Boards ~-~-> Boards Manager, find the esp32 information and install it.
1017 1017  
1018 -* (% style="color:#037691" %)**Go to tools ~-~-> Boards ~-~-> Boards Manager**,(%%) **find the esp32 information and install it.**
1019 -
1020 1020  [[image:1664503715811-892.png]]
1021 1021  
1022 1022  
1023 1023  
1024 -* **Download the latest TrackerD from the dragino github: [[https:~~/~~/github.com/dragino/TrackerD>>url:https://github.com/dragino/TrackerD]]**
798 +* Download the latest TrackerD from the dragino github: [[https:~~/~~/github.com/dragino/TrackerD>>url:https://github.com/dragino/TrackerD]]
1025 1025  
1026 1026  Put the Library in the TrackerD directory into the libraries file in the Arduino directory:
1027 1027  
... ... @@ -1033,19 +1033,19 @@
1033 1033  == 6.2 Source Code ==
1034 1034  
1035 1035  
1036 -* (% style="color:blue" %)**Open the example in the TrackerD file, please select the correct port in the IDE, as shown below:**
810 +* Open the example in the TrackerD file, please select the correct port in the IDE, as shown below:
1037 1037  
1038 1038  [[image:1664503794261-827.png]]
1039 1039  
1040 1040  
1041 1041  
1042 -* (% style="color:blue" %)**Click to upload**
816 +* Click to upload
1043 1043  
1044 1044  [[image:1664503808294-336.png]]
1045 1045  
1046 1046  
1047 1047  
1048 -* (% style="color:blue" %)**Check the result, if the upload is successful, as shown below, open the serial port to view the data**
822 +* Check the result, if the upload is successful, as shown below, open the serial port to view the data
1049 1049  
1050 1050  [[image:1664503824081-592.png]] [[image:1664503831430-500.png]]
1051 1051  
... ... @@ -1057,7 +1057,7 @@
1057 1057  == 7.1 How to change the LoRa Frequency Bands/Region? ==
1058 1058  
1059 1059  
1060 -User can follow the introduction for [[how to upgrade image>>||anchor="H5.UploadFirmware"]]. When download the images, choose the required image file for download.
834 +User can follow the introduction for [[how to upgrade image>>path:#upgrade_image]]. When download the images, choose the required image file for download.
1061 1061  
1062 1062  
1063 1063  
... ... @@ -1068,8 +1068,8 @@
1068 1068  
1069 1069  
1070 1070  
1071 -(% border="1.5" cellspacing="3" style="background-color:#ffffcc; color:green; width:314px" %)
1072 -|=(% style="width: 118px;" %)**Pin**|=(% style="width: 67px;" %)**Color**|=(% style="width: 123px;" %)**USB Pin**
845 +(% border="2" style="background-color:#ffffcc; color:green; width:314px" %)
846 +|(% style="width:118px" %)**Pin**|(% style="width:67px" %)**Color**|(% style="width:123px" %)**USB Pin**
1073 1073  |(% style="width:118px" %)A4,B4,A9,B9|(% style="width:67px" %)Red|(% style="width:123px" %)VCC
1074 1074  |(% style="width:118px" %)A7,B7|(% style="width:67px" %)White|(% style="width:123px" %)D- (N/A)
1075 1075  |(% style="width:118px" %)A6,B6|(% style="width:67px" %)Green|(% style="width:123px" %)D+(N/A)
... ... @@ -1094,31 +1094,25 @@
1094 1094  * (% style="color:red" %)**AU915**(%%): Default frequency band AU915
1095 1095  * (% style="color:red" %)**US915**(%%): Default frequency band US915
1096 1096  
1097 -
1098 -
1099 1099  = 9.  Packing Info =
1100 1100  
1101 1101  
1102 -(% style="color:#037691" %)**Package Includes**:
874 +**Package Includes**:
1103 1103  
1104 1104  * TrackerD LoRaWAN GPS/BLE Tracker x 1
1105 1105  * USB recharge & program cable x 1
1106 1106  
1107 -(% style="color:#037691" %)**Dimensions and Weight**:
879 +**Dimensions and Weight**:
1108 1108  
1109 1109  * Device Size: 85 x 48 x 15 cm
1110 1110  * Weight: 50g
1111 1111  
1112 -
1113 -
1114 1114  = 10. Support =
1115 1115  
1116 1116  
1117 1117  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
1118 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]].
888 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]]
1119 1119  
1120 -
1121 -
1122 1122  = 11.  Reference =
1123 1123  
1124 1124  
... ... @@ -1125,5 +1125,3 @@
1125 1125  * [[**Firmware in Bin format**>>https://www.dropbox.com/sh/733s8xlwahhqg1d/AABxDz80lBVX_to8zNuUQWFja?dl=0]]
1126 1126  * **[[Source Code>>https://github.com/dragino/TrackerD]] **
1127 1127  * [[**Hardware Source**>>https://www.dropbox.com/sh/orwoy6cecb89m4e/AAD37sRuUrvKsHgAJxuVTkB5a?dl=0]]
1128 -
1129 -
1665301570342-765.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -31.6 KB
Content
1665301636888-168.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -36.6 KB
Content
1665301687277-443.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -22.6 KB
Content
1665301786397-168.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -22.6 KB
Content
image-20221006181316-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -17.7 KB
Content
image-20221006181357-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -88.0 KB
Content
image-20221009160220-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -46.4 KB
Content
image-20221009160309-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -57.2 KB
Content
image-20221009234629-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -222.9 KB
Content
image-20221009234703-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -136.4 KB
Content
image-20221024105643-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -11.3 KB
Content
image-20221024105643-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -64.5 KB
Content