Skip to Content
Last modified by Xiaoling on 2025/04/27 16:48
From version 79.1
edited by Edwin Chen
on 2022/10/22 00:11
Change comment: There is no comment for this version
To version 71.1
edited by Edwin Chen
on 2022/10/09 23:47
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -206,11 +206,9 @@
206 206  === 2.4.1 Uplink FPORT~=5, Device Status ===
207 207  
208 208  
209 -Uplink the device configures with FPORT=5. Once TrackerD Joined the network, it will uplink this message to the server. After the first uplink, TrackerD will uplink Device Status every 12 hours.
209 +Uplink the device configures with FPORT=5. Once LGT92 Joined the network, it will uplink this message to the server. After first uplink, LHT52 will uplink Device Status every 12 hours.
210 210  
211 -Use can also get the Device Status uplink through the downlink command: **Downlink:  0x2301**
212 212  
213 -
214 214  (% border="1.5" style="background-color:#ffffcc; color:green; width:520px" %)
215 215  |=(% scope="row" style="width: 108px;" %)**Size(bytes)**|=(% style="width: 82px;" %)**1**|=(% style="width: 83px;" %)**2**|=(% style="width: 94px;" %)**1**|=(% style="width: 84px;" %)**1**|=(% style="width: 44px;" %)2|=(% style="width: 63px;" %)**2**|=(% style="width: 60px;" %)1
216 216  |=(% style="width: 108px;" %)**Value**|(% style="width:82px" %)Sensor Model|(% style="width:83px" %)Firmware Version|(% style="width:94px" %)Frequency Band|(% style="width:84px" %)Sub-band|(% style="width:44px" %)BAT|(% style="width:63px" %)SMOD|(% style="width:60px" %)Status
... ... @@ -218,13 +218,13 @@
218 218  [[image:1665301570342-765.png]]
219 219  
220 220  
221 -(% style="color:#037691" %)**Example of Device Status:**(%%) 13014001FF0FA24002
219 +Example Payload (FPort=5):  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT52%20-%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220621105116-11.png?rev=1.1||alt="image-20220621105116-11.png"]]
222 222  
223 -(% style="color:#037691" %)**Sensor Model:** (%%) For TrackerD,this value is 0x13
221 +**Sensor Model**: For TrackerD, this value is 0x13.
224 224  
225 -(% style="color:#037691" %)**Firmware Version: **(%%) 0x0140,Means:v1.4.0 version
223 +**Firmware Version**: 0x0100, Means: v1.0.0 version.
226 226  
227 -(% style="color:#037691" %)**Frequency Band**:
225 +**Frequency Band**:
228 228  
229 229  *0x01: EU868
230 230  
... ... @@ -246,56 +246,20 @@
246 246  
247 247  *0x0a: AS923-3
248 248  
249 -Sub- Band:value 0x00~~0x08(only forAU915,US915,Others are 0xFF)
247 +**Sub-Band**: value 0x00 ~~ 0x08(only for CN470, AU915,US915. Others are0x00)
250 250  
251 -(% style="color:#037691" %)**BAT:**(%%) shows the battery voltage for TrackerD.
249 +**BAT**: shows the battery voltage for TrackerD.
252 252  
251 +Ex1: 0x0B3A = 2874mV
253 253  
254 -(% style="color:#037691" %)**Ex1:**(%%) 0x0FA2 = 4002mV
255 -
256 256  Use can also get the Device Status uplink through the downlink command:
257 257  
258 258  
259 259  
260 -(% style="color:#037691" %)**SMOD Field (total 1 byte)**(%%)：0x40
261 -
262 -(% border="1.5" style="background-color:#ffffcc; color:green; width:420px" %)
263 -|(% style="width:75px" %)**Size(bit)**|(% style="width:64px" %)2bits|(% style="width:137px" %)2bit|(% style="width:142px" %)4bit
264 -|(% style="width:75px" %)**Value**|(% style="width:64px" %)SMOD|(% style="width:137px" %)GPS_Settings|(% style="width:142px" %)BLE_Settings
265 -
266 -(% style="color:blue" %)** SMOD：**
267 -
268 -(% style="color:red" %)** 1 :** (%%) GPS ONLY
269 -
270 -(% style="color:red" %)** 2 :** (%%) BLE ONLY
271 -
272 -(% style="color:red" %)** 3 :**  (%%) GPS/BLE Hybrid
273 -
274 -
275 -(% style="color:blue" %)** GPS_MOD: Define how to send GPS payload**
276 -
277 -(% style="color:red" %)** 0 : ** (%%) Enable uploading on-board Temperature and humidity values
278 -
279 -(% style="color:red" %)** 1 :** (%%) Disable uploading on-board Temperature and humidity values
280 -
281 -
282 -(% style="color:blue" %)** BLE_Settings:**
283 -
284 -(% style="color:red" %)** 1: ** (%%) BLE Positioning with Strongest iBeacon
285 -
286 -
287 -
288 -(% style="color:#037691" %)**Status Field (total 1 byte)**(%%):  0x02
289 -
290 -(% border="1.5" style="background-color:#ffffcc; color:green; width:417px" %)
291 -|(% style="width:77px" %)**Size(bit)**|(% style="width:70px" %)5 Bits|(% style="width:92px" %)1 Bit|(% style="width:48px" %)1 Bit|(% style="width:126px" %)1 Bit
292 -|(% style="width:77px" %)**Value**|(% style="width:70px" %)Reserve|(% style="width:92px" %)[[PNACKMD>>||anchor="H2.4.4A0UplinkFPORT3D42CHistoryGNSSPositioning"]]|(% style="width:48px" %)[[LON>>||anchor="H3.2.5Disable2FEnableLEDflash"]]|(% style="width:126px" %)[[Transport Mode>>||anchor="H2.9TransportMode"]]
293 -
294 -
295 295  === 2.4.2 Uplink FPORT~=2, Realtime GNSS Positioning + Temperature & Humidity ===
296 296  
297 297  
298 -Users can use **AT+SMOD=1,0,0** to enable uploading on-board Temperature and humidity values, and the total payload will be 15 bytes,
260 +User can use **AT+SMOD=1,0** to enable uploading on-board Temperature and humidity values, and the total payload will be 15 bytes, please note that 15 bytes won't work on DR0 on US915/AU915 frequency band.
299 299  
300 300  
301 301  (% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:480px" %)
... ... @@ -319,6 +319,10 @@
319 319  |=(% scope="row" style="width: 50px;" %)**Size(bit)**|(% style="width:50px" %)1 bit|(% style="width:80px" %)1bit|(% style="width:50px" %)14bits
320 320  |=(% style="width: 72px;" %)**Value**|(% style="width:67px" %)reserve|(% style="width:118px" %)Alarm Indicate|(% style="width:63px" %)[[BAT>>||anchor="HBAT:"]] 
321 321  
284 +==== ====
285 +
286 +==== ====
287 +
322 322  ==== (% style="color:blue" %)**FLAG:**(%%) ====
323 323  
324 324  (% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:250px" %)
... ... @@ -333,6 +333,7 @@
333 333  * Latitude: 02863D68  ⇒  //if (0x//02863D68//& 0x80000000 = 0 )~://  //value = 02863D68 /1000000 = 42.351976//
334 334  * Longitude: FAC29BAF  ⇒ //if (0x//FAC29BAF// & 0x80000000 = 1 )~://  //value = (0x//FAC29BAF// – 0x 100000000)/1000000 =//-87.9094//57//
335 335  
302 +
336 336  (% style="color:red" %)**Important note:**
337 337  
338 338  1.  When power is low (<2.84v), GPS won't be able to get location info and GPS feature will be disabled and the location field will be filled with 0x0FFFFFFF, 0x0FFFFFFF.
... ... @@ -351,12 +351,13 @@
351 351  
352 352  ==== (% style="color:blue" %)**Alarm:**(%%) ====
353 353  
354 -**Example: ** 0x4B & 0x40 >> 6 = 0x01
321 +Example:  0x4B & 0x40 >> 6 = 0x01
355 355  
356 356  
324 +
357 357  ==== (% style="color:blue" %)**BAT:**(%%) ====
358 358  
359 -**Example: ** 0x4B45 & 0x3FFF ⇒ 2885 (mV).
327 +Example:  0x0CDD & 0x3FFF ⇒ 3293 (mV).
360 360  
361 361  (((
362 362  The battery info shows the battery voltage, User can use the below mapping to indicate the battery in percentage: \
... ... @@ -368,37 +368,20 @@
368 368  * 3.40v ~~ 3.69v:  20% ~~ 40%
369 369  * < 3.39v:  0~~20%
370 370  
371 -==== (% style="color:blue" %)**MOD:**(%%) ====
372 372  
373 -**Example: ** (0x60>>6) & 0x3f =1
374 -
375 -**Set the format of GPS data uplink link：**
376 -
377 -(% style="color:#037691" %)**0x00:** (%%) Enable uploading on-board Temperature and humidity values
378 -(% style="color:#037691" %)**0x01: ** (%%) Disable uploading on-board Temperature and humidity values
379 -
380 -
381 -**Set the format of BLE data uplink link：**
382 -
383 -(% style="color:#037691" %)**0x01: ** (%%) BLE Positioning with Strongest iBeacon
384 -
385 -
386 386  ==== (% style="color:blue" %)**LON:**(%%) ====
387 387  
388 -**Example:** (0x60>>5) & 0x01=1.
389 -
390 390  Enable/Disable LED activity for uplink
391 391  
392 392  (((
393 -(% style="color:#037691" %)**0x00:**  (%%) Disable LED indicator.
345 +0x00:  Disable LED indicator.
394 394  )))
395 395  
396 396  (((
397 -(% style="color:#037691" %)**0x01:**  (%%) Enable LED indicator (Default Value)
349 +0x01:  Enable LED indicator (Default Value)
398 398  )))
399 399  
400 400  
401 -
402 402  ==== (% style="color:blue" %)**Hum:**(%%) ====
403 403  
404 404  0202 = //if (0x0202 & 0x8000 = 0 ):  value =// 0x0202 / 100 = +514 ⇒ 51.4 degree
... ... @@ -413,7 +413,7 @@
413 413  === 2.4.3  Uplink FPORT~=3, Realtime GNSS Positioning (Default Mode) ===
414 414  
415 415  
416 -The default uplink payload includes total 11 bytes (**AT+SMOD=1,1,0**). The payload is the first 11 bytes of Uplink FPORT=2, real-time GNSS positioning, (remove the temp and humidity)
367 +The default uplink payload includes totally 11 bytes. The payload is the first 11 bytes of Uplink FPORT=2, real-time GNSS positioning, (remove the temp and humidity)
417 417  
418 418  
419 419  (% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:480px" %)
... ... @@ -432,7 +432,7 @@
432 432  === 2.4.4  Uplink FPORT~=4, History GNSS Positioning ===
433 433  
434 434  
435 -Set [[PNACKMD=1>>||anchor="H3.2.10A0A0AutoSendNone-ACKmessages"]], and TrackerD will wait for ACK for every uplink, when there is no LoRaWAN network, TrackerD will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
386 +Set [[PNACKMD=1>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H4.13AutoSendNone-ACKmessages]], and TrackerD will wait for ACK for every uplink, when there is no LoRaWAN network, TrackerD will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
436 436  
437 437  
438 438  (% style="color:red" %)**Note for this mode:**
... ... @@ -439,7 +439,6 @@
439 439  
440 440  * a) TrackerD will do an ACK check for data records sending to make sure every data arrive server.
441 441  * b) TrackerD will send data in (% style="color:blue" %)**CONFIRMED Mode**(%%) when PNACKMD=1, but TrackerD won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink, if TrackerD gets an ACK, TrackerD will consider there is a network connection and resend all NONE-ACK Messages.
442 -* c) the total payload will be 15 bytes, while US915/AU915 DR0 accepts only 11 bytes of payload. In this case (DR0 of US915/AU915), the payload on server will show NULL
443 443  
444 444  The payload is 15 bytes, as below.
445 445  
... ... @@ -455,9 +455,7 @@
455 455  
456 456  === 2.4.5  Uplink FPORT~=6, BLE Positioning with Strongest iBeacon ===
457 457  
458 -TrackerD supports BLE scans for indoor positioning. User can set **SMOD** to **BLE pure** or **GPS/BLE hybrid** so TrackerD will scan BLE iBeacon before each uplink.
459 459  
460 -
461 461  (% border="1.5" cellspacing="3" style="background-color:#ffffcc; color:green; width:450px" %)
462 462  |=(% scope="row" style="width: 60px;" %)(((
463 463  **Size(bytes)**
... ... @@ -477,7 +477,7 @@
477 477  [[image:1664502425687-834.png]]
478 478  
479 479  
480 -* (% style="color:#037691" %)**BAT: ** (%%) Ex1:0x4B45 & 0x3FFF ⇒ 3901 (mV).
428 +* (% style="color:#037691" %)**BAT: ** (%%) Ex1: 0x4B45 & 0x3FFF ⇒ 3901 (mV).
481 481  * (% style="color:#037691" %)**MODE:   **(%%)Define the payload format.
482 482  * (% style="color:#037691" %)**UUID:     **(%%)The uuid from the strongest iBeacon.
483 483  * (% style="color:#037691" %)**MAJOR:** (%%) The MAJOR from the strongest iBeacon.
... ... @@ -486,6 +486,7 @@
486 486  * (% style="color:#037691" %)**RSSI:  ** (%%) The RSSI from the strongest iBeacon.
487 487  
488 488  
437 +
489 489  === 2.4.6  Add Payload format in TTN V3 ===
490 490  
491 491  
... ... @@ -497,9 +497,8 @@
497 497  [[image:1664502649601-895.png]]
498 498  
499 499  
500 -Add the decoder from this link: 
449 +Add the decoder from this link:
501 501  
502 -[[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/TrackerD>>https://github.com/dragino/dragino-end-node-decoder/tree/main/TrackerD]]
503 503  
504 504  Save the change the uplink message will be parsed. As below:
505 505  
... ... @@ -542,16 +542,15 @@
542 542  == 2.7  Datalog Feature ==
543 543  
544 544  
545 -total 273 entries,by default,
493 +total 273 entries,by default disable
546 546  
547 -User can set [[PNACKMD=1>>||anchor="H3.2.10A0A0AutoSendNone-ACKmessages"]], to enable Datalog feature.
548 548  
549 549  Example use case.
550 550  
551 -[[image:image-20221009234703-2.png||height="328" width="899"]]
498 +[[image:image-20221009234703-2.png]]
552 552  
553 553  
554 -[[image:image-20221009234629-1.png||height="390" width="577"]]
501 +[[image:image-20221009234629-1.png||height="441" width="652"]]
555 555  
556 556  
557 557  
... ... @@ -605,6 +605,8 @@
605 605  |(% style="width:157px" %)**Get Downlink**|(% style="width:271px" %)(% style="color:green" %)**GREEN**(%%) led on 1 second|(% style="width:202px" %)Yes
606 606  |(% style="width:157px" %)**Movement Detect**|(% style="width:271px" %)(% style="color:red" %)**RED **(%%)led on 500ms|(% style="width:202px" %)N/A
607 607  
555 +
556 +
608 608  == 2.11 Button Function ==
609 609  
610 610  
... ... @@ -626,6 +626,8 @@
626 626  |(% style="width:135px" %)Exit Alarm Mode|(% style="width:220px" %)Fast press the (% style="color:red" %)**RED** (%%)button 10 times|(% style="width:265px" %)Exit Alarm Mode
627 627  |(% style="width:135px" %)Enter Deep Sleep Mode|(% style="width:220px" %)Press and hold the button for 10 seconds, then quickly press the device 3 times to enter deep sleep|(% style="width:265px" %)This is the mode ship out from factory. CPU will be complete in sleep mode and no LoRa activity, only use before deploy.
628 628  
578 +
579 +
629 629  == 2.12 USB Port Function ==
630 630  
631 631  
... ... @@ -636,6 +636,8 @@
636 636  * [[Configure Device>>||anchor="H3.ConfigureTrackerDviaATcommandorLoRaWANdownlink"]]
637 637  * [[Upgrade Firmware>>||anchor="H5.UploadFirmware"]]
638 638  
590 +
591 +
639 639  = 3. Configure TrackerD via AT command or LoRaWAN downlink =
640 640  
641 641  
... ... @@ -778,38 +778,42 @@
778 778  === 3.2.7 Set Positioning Mode ===
779 779  
780 780  
781 -SMOD define how TrackerD scan and uplink data:
734 +SMOD define the how TrackerD scan and uplink data:
782 782  
783 783  
784 784  * (% style="color:blue" %)**AT Command:**
785 785  
786 -(% style="color:#037691" %)**AT+SMOD=aa,bb,cc**
739 +(% style="color:#037691" %)**AT+SMOD=aa,bb**
787 787  
788 788  (% style="color:#037691" %)** aa:**
789 789  
790 -* (% style="color:red" %)**1: GPS ONLY(Factory Settings):    **(%%)only get and uplink GPS location info.
791 -* (% style="color:red" %)**2: BLE ONLY:              **(%%)Only obtain iBeacon info via BLE and uplink. Design for Indoor tracking.
792 -* (% style="color:red" %)**3: GPS/BLE Hybrid:   **(%%)Combination for Indoor and Outdoor tracking.Devices will try to search BLE iBeacon first. If device can't find the iBeacon, it will use GPS for positioning.
743 +* (% style="color:#037691" %)**1: GPS ONLY(Factory Settings):    **(%%)only get and uplink GPS location info.
744 +* (% style="color:#037691" %)**2: BLE ONLY:              **(%%)Only obtain iBeacon info via BLE and uplink. Design for Indoor tracking.
745 +* (% style="color:#037691" %)**3: GPS/BLE Hybrid:   **(%%)Combination for Indoor and Outdoor tracking.Devices will try to search BLE iBeacon first. If device can't find the iBeacon, it will use GPS for positioning
793 793  
794 794  (% style="color:#037691" %)**bb:**
795 795  
796 -* (% style="color:red" %)**0 :  **(%%)GPS+ BAT+ State+Tem&Hum
797 -* (% style="color:red" %)**1 :**(%%)  GPS +BAT State
749 +(% style="color:#037691" %)** if aa = 1: **
798 798  
799 -(% style="color:#037691" %)**cc:   **
751 +* (% style="color:#037691" %)**0 :  **(%%)GPS+ BAT+ State+Tem&Hum
752 +* (% style="color:#037691" %)**1 :**(%%)  GPS +BAT State
800 800  
801 -* (% style="color:red" %)**1 : **(%%) (iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State  
754 +(% style="color:#037691" %)** if aa = 2: **
802 802  
803 -(% style="color:blue" %)**Example:**
756 +* (% style="color:#037691" %)**3 :  **(%%)(iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State
804 804  
805 - AT+ SMOD =1,0,0 ~-~->  GPS+ BAT+ State+Tem&Hum
806 - AT+ SMOD =1,1,0 ~-~->  GPS +BAT State
807 - AT+ SMOD =2,0,1 ~-~->  (iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State
758 + **Example:**
808 808  
760 + AT+ SMOD =1,0  **~-~-> ** GPS+ BAT+ State+Tem&Hum
809 809  
762 + AT+ SMOD =1,1    **~-~->**  GPS +BAT State
763 +
764 + AT+ SMOD =2,3    **~-~->**  (iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State
765 +
766 +
810 810  * (% style="color:blue" %)**Downlink Payload (prefix 0xA5):**
811 811  
812 -(% style="color:#037691" %)**0xA5 01 00 00**    (%%) ~/~/  Same as AT+ SMOD =1,0,0
769 +(% style="color:#037691" %)**0xA5 01 00**    (%%) ~/~/  Same as AT+ SMOD =1,0
813 813  
814 814  
815 815  
... ... @@ -826,7 +826,7 @@
826 826  
827 827  (% style="color:#037691" %)**AT+FTIME=xx**  (%%) **~-~-> ** Set to use xx as max fix time.
828 828  
829 -**Example:**  AT+FTIME=150
786 +Example:  AT+FTIME=150
830 830  
831 831  
832 832  * (% style="color:blue" %)**Downlink Payload (prefix 0xAA):**
... ... @@ -863,7 +863,7 @@
863 863  
864 864  * (% style="color:blue" %)**AT Command:**
865 865  
866 -(% style="color:#037691" %)**AT+CFM=xx**
823 +(% style="color:#037691" %)**AT+CFM=xx. **
867 867  
868 868  
869 869  **~ Example:**
... ... @@ -879,27 +879,6 @@
879 879  
880 880  
881 881  
882 -=== 3.2.10  Auto Send None-ACK messages ===
883 -
884 -
885 -TrackerD will wait for ACK for each uplink, If TrackerD doesn't get ACK from the IoT server, it will consider the message doesn't arrive server and store it. TrackerD keeps sending messages in normal periodically. Once TrackerD gets ACK from a server, it will consider the network is ok and start to send the not-arrive message.
886 -
887 -
888 -* (% style="color:blue" %)**AT Command: AT+PNACKMD**
889 -
890 -The default factory setting is 0.
891 -
892 -
893 -**Command Example Function Response:**
894 -
895 -(% style="color:#037691" %)**AT+PNACKMD=1**  (%%) ~/~/  Poll None-ACK message OK
896 -
897 -
898 -* (% style="color:blue" %)**Downlink Command: 0x34**
899 -
900 -Example: 0x3401  ~/~/  Same as AT+PNACKMD=1
901 -
902 -
903 903  = 4. Setting for Different Scenarios =
904 904  
905 905  
... ... @@ -942,7 +942,7 @@
942 942  
943 943  (% style="color:blue" %)**Step5:** (%%) Select the firmware file (.bin format), com port and proper SPI configure. Clink Start. Bin file location:
944 944  
945 -[[https:~~/~~/github.com/dragino/TrackerD/releases>>https://github.com/dragino/TrackerD/releases]]
881 +[[https:~~/~~/www.dropbox.com/sh/733s8xlwahhqg1d/AABxDz80lBVX_to8zNuUQWFja?dl=0>>url:https://www.dropbox.com/sh/733s8xlwahhqg1d/AABxDz80lBVX_to8zNuUQWFja?dl=0]]
946 946  
947 947  
948 948  Users need to use below files:
... ... @@ -1045,6 +1045,7 @@
1045 1045  |(% style="width:118px" %)B8|(% style="width:67px" %)Grey|(% style="width:123px" %)MTDO/GPIO15
1046 1046  
1047 1047  
984 +
1048 1048  = 8.  Order Info =
1049 1049  
1050 1050  
... ... @@ -1061,6 +1061,7 @@
1061 1061  * (% style="color:red" %)**US915**(%%): Default frequency band US915
1062 1062  
1063 1063  
1001 +
1064 1064  = 9.  Packing Info =
1065 1065  
1066 1066