Last modified by Xiaoling on 2025/04/27 16:48

From version 78.6
edited by Xiaoling
on 2022/10/18 16:18
Change comment: There is no comment for this version
To version 51.29
edited by Xiaoling
on 2022/09/30 15:58
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -61,11 +61,13 @@
61 61  * EEPROM: 520 KB
62 62  * Clock Speed: 32Mhz
63 63  
64 +
64 64  (% style="color:blue" %)**Common DC Characteristics:**
65 65  
66 66  * Supply Voltage: 5V via USB port or Internal li-on battery
67 67  * Operating Temperature: -40 ~~ 60°C
68 68  
70 +
69 69  (% style="color:blue" %)**LoRa Spec:**
70 70  
71 71  * Frequency Range,
... ... @@ -87,10 +87,12 @@
87 87  * Packet engine up to 256 bytes with CRC.
88 88  * LoRaWAN 1.0.3 Specification
89 89  
92 +
90 90  (% style="color:blue" %)**Battery:**
91 91  
92 92  * 1000mA Li-on Battery power (for model TrackerD)
93 93  
97 +
94 94  (% style="color:blue" %)**Power Consumption**
95 95  
96 96  * Sleeping Mode: 200uA
... ... @@ -105,7 +105,7 @@
105 105  * LoRaWAN 1.0.3 Class A
106 106  * ESP32 PICO D4
107 107  * SX1276/78 Wireless Chip
108 -* Arduino IDE Compatible
112 +** Arduino IDE Compatible
109 109  * Open source hardware / software
110 110  * Regular/ Real-time GPS,BLE,WIFI tracking
111 111  * Built-in3 axis accelerometer (LIS3DH)
... ... @@ -189,132 +189,42 @@
189 189  (% style="color:blue" %)**Step 3:**(%%) TrackerD will auto join to the LoRaWAN network. After join success, TrackerD will start to upload message to IoT server.
190 190  
191 191  
196 +(% style="color:blue" %)**Positioning Mode(SMOD):**
192 192  
193 -== 2.3  Positioning Mode(SMOD) ==
198 +* (% style="color:#037691" %)**GPS ONLY(Factory Settings):    **(%%)only get GPS location info.
199 +* (% style="color:#037691" %)**BLE ONLY:              **(%%)Only obtain iBeacon info via BLE. Design for Indoor tracking.
200 +* (% style="color:#037691" %)**GPS/BLE Hybrid:   **(%%)Combination for Indoor and Outdoor tracking.
194 194  
202 +User can switch modes by [[changing SMOD>>||anchor="H3.2.7SetPositioningMode"]].
195 195  
196 -Users can set TrackerD to different Positioning Mode for different applications. Below mod are supported.
197 197  
198 -* (% style="color:#037691" %)**GPS ONLY(Factory Settings):    **(%%)only get and uplink GPS location info.
199 -* (% style="color:#037691" %)**BLE ONLY:              **(%%)Only obtain iBeacon info via BLE and uplink. Design for Indoor tracking.
200 -* (% style="color:#037691" %)**GPS/BLE Hybrid:   **(%%)Combination for Indoor and Outdoor tracking.Devices will try to search BLE iBeacon first. If device can't find the iBeacon, it will use GPS for positioning.
201 201  
202 -Users can switch modes by [[changing SMOD>>||anchor="H3.2.7SetPositioningMode"]].
206 +== 2.3 Uplink Payload ==
203 203  
204 204  
209 +=== 2.3.1 Uplink FPORT~=5, Device Status ===
205 205  
206 -== 2.4  Uplink Payload ==
207 207  
208 208  
209 -=== 2.4.1 Uplink FPORT~=5, Device Status ===
213 +=== 2.3.2 Uplink FPORT~= , Realtime GNSS Positioning ===
210 210  
211 211  
212 -Uplink the device configures with FPORT=5. Once TrackerD Joined the network, it will uplink this message to the server. After the first uplink, TrackerD will uplink Device Status every 12 hours.
216 +The default uplink payload includes totally 11 bytes. (User can use AT+MOD=0 to enable the Temperature and humidity sensor to hum/tem info from accelerometer. When accelerometer info is enable, total payload will be 15 bytes, please note 15 bytes won't work on DR0 on US915/AU915 frequency band. )
213 213  
214 -Use can also get the Device Status uplink through the downlink command: **Downlink:  0x2301**
215 215  
216 -
217 -(% border="1.5" style="background-color:#ffffcc; color:green; width:520px" %)
218 -|=(% scope="row" style="width: 108px;" %)**Size(bytes)**|=(% style="width: 82px;" %)**1**|=(% style="width: 83px;" %)**2**|=(% style="width: 94px;" %)**1**|=(% style="width: 84px;" %)**1**|=(% style="width: 44px;" %)2|=(% style="width: 63px;" %)**2**|=(% style="width: 60px;" %)1
219 -|=(% style="width: 108px;" %)**Value**|(% style="width:82px" %)Sensor Model|(% style="width:83px" %)Firmware Version|(% style="width:94px" %)Frequency Band|(% style="width:84px" %)Sub-band|(% style="width:44px" %)BAT|(% style="width:63px" %)SMOD|(% style="width:60px" %)Status
220 -
221 -[[image:1665301570342-765.png]]
222 -
223 -
224 -(% style="color:#037691" %)**Example of Device Status:**(%%) 13014001FF0FA24002
225 -
226 -(% style="color:#037691" %)**Sensor Model:** (%%) For TrackerD,this value is 0x13
227 -
228 -(% style="color:#037691" %)**Firmware Version: **(%%) 0x0140,Means:v1.4.0 version
229 -
230 -(% style="color:#037691" %)**Frequency Band**:
231 -
232 -*0x01: EU868
233 -
234 -*0x02: US915
235 -
236 -*0x03: IN865
237 -
238 -*0x04: AU915
239 -
240 -*0x05: KZ865
241 -
242 -*0x06: RU864
243 -
244 -*0x07: AS923
245 -
246 -*0x08: AS923-1
247 -
248 -*0x09: AS923-2
249 -
250 -*0x0a: AS923-3
251 -
252 -Sub- Band:value 0x00~~0x08(only forAU915,US915,Others are 0xFF)
253 -
254 -(% style="color:#037691" %)**BAT:**(%%) shows the battery voltage for TrackerD.
255 -
256 -
257 -(% style="color:#037691" %)**Ex1:**(%%) 0x0FA2 = 4002mV
258 -
259 -Use can also get the Device Status uplink through the downlink command:
260 -
261 -
262 -
263 -(% style="color:#037691" %)**SMOD Field (total 1 byte)**(%%):0x40
264 -
265 -(% border="1.5" style="background-color:#ffffcc; color:green; width:420px" %)
266 -|(% style="width:75px" %)**Size(bit)**|(% style="width:64px" %)2bits|(% style="width:137px" %)2bit|(% style="width:142px" %)4bit
267 -|(% style="width:75px" %)**Value**|(% style="width:64px" %)SMOD|(% style="width:137px" %)GPS_Settings|(% style="width:142px" %)BLE_Settings
268 -
269 -(% style="color:blue" %)** SMOD:**
270 -
271 -(% style="color:red" %)** 1 :** (%%) GPS ONLY
272 -
273 -(% style="color:red" %)** 2 :** (%%) BLE ONLY
274 -
275 -(% style="color:red" %)** 3 :**  (%%) GPS/BLE Hybrid
276 -
277 -
278 -(% style="color:blue" %)** GPS_MOD: Define how to send GPS payload**
279 -
280 -(% style="color:red" %)** 0 : ** (%%) Enable uploading on-board Temperature and humidity values
281 -
282 -(% style="color:red" %)** 1 :** (%%) Disable uploading on-board Temperature and humidity values
283 -
284 -
285 -(% style="color:blue" %)** BLE_Settings:**
286 -
287 -(% style="color:red" %)** 1: ** (%%) BLE Positioning with Strongest iBeacon
288 -
289 -
290 -
291 -(% style="color:#037691" %)**Status Field (total 1 byte)**(%%):  0x02
292 -
293 -(% border="1.5" style="background-color:#ffffcc; color:green; width:417px" %)
294 -|(% style="width:77px" %)**Size(bit)**|(% style="width:70px" %)5 Bits|(% style="width:92px" %)1 Bit|(% style="width:48px" %)1 Bit|(% style="width:126px" %)1 Bit
295 -|(% style="width:77px" %)**Value**|(% style="width:70px" %)Reserve|(% style="width:92px" %)[[PNACKMD>>||anchor="H2.4.4A0UplinkFPORT3D42CHistoryGNSSPositioning"]]|(% style="width:48px" %)[[LON>>||anchor="H3.2.5Disable2FEnableLEDflash"]]|(% style="width:126px" %)[[Transport Mode>>||anchor="H2.9TransportMode"]]
296 -
297 -
298 -
299 -=== 2.4.2 Uplink FPORT~=2, Realtime GNSS Positioning + Temperature & Humidity ===
300 -
301 -
302 -Users can use **AT+SMOD=1,0,0** to enable uploading on-board Temperature and humidity values, and the total payload will be 15 bytes,
303 -
304 -
305 305  (% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:480px" %)
306 306  |=(% scope="row" style="width: 50px;" %)(((
307 307  **Size(bytes)**
308 -)))|(% style="width:60px" %)4|(% style="width:70px" %)4|(% style="width:80px" %)2|(% style="width:73px" %)1|(% style="width:40px" %)(((
309 -2
222 +)))|(% style="width:60px" %)4|(% style="width:70px" %)4|(% style="width:80px" %)2|(% style="width:50px" %)1|(% style="width:88px" %)(((
223 +2(optional)
310 310  )))|(% style="width:87px" %)(((
311 -2
225 +2(optional)
312 312  )))
313 313  |=(% style="width: 69px;" %)**Value**|(% style="width:76px" %)[[Latitude>>||anchor="HLocationinfo:"]]|(% style="width:87px" %)[[Longitude>>||anchor="HLocationinfo:"]]|(% style="width:76px" %)(((
314 314  [[Alarm & BAT>>||anchor="HAlarm26BAT:"]]
315 -)))|(% style="width:73px" %)[[FLAG>>||anchor="HFLAG:"]]|(% style="width:40px" %)[[Hum>>||anchor="HHum:"]]|(% style="width:87px" %)[[Tem>>||anchor="HTem:"]]
229 +)))|(% style="width:52px" %)[[FLAG>>||anchor="HFLAG:"]]|(% style="width:88px" %)[[Hum>>||anchor="HHum:"]]|(% style="width:87px" %)[[Tem>>||anchor="HTem:"]]
316 316  
317 -[[image:1665301636888-168.png]]
231 +[[image:1664501958445-288.png]]
318 318  
319 319  
320 320  ==== (% style="color:blue" %)**Alarm & BAT:**(%%) ====
... ... @@ -323,11 +323,12 @@
323 323  |=(% scope="row" style="width: 50px;" %)**Size(bit)**|(% style="width:50px" %)1 bit|(% style="width:80px" %)1bit|(% style="width:50px" %)14bits
324 324  |=(% style="width: 72px;" %)**Value**|(% style="width:67px" %)reserve|(% style="width:118px" %)Alarm Indicate|(% style="width:63px" %)[[BAT>>||anchor="HBAT:"]] 
325 325  
240 +
326 326  ==== (% style="color:blue" %)**FLAG:**(%%) ====
327 327  
328 328  (% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:250px" %)
329 -|=(% scope="row" style="width: 50px;" %)**Size(bit)**|(% style="width:50px" %)2bits|(% style="width:50px" %)1bit
330 -|=(% style="width: 79px;" %)**Value**|(% style="width:55px" %)[[MOD>>||anchor="H3.2.7SetPositioningMode"]]|(% style="width:47px" %)[[LON>>||anchor="HLON:"]]
244 +|=(% scope="row" style="width: 50px;" %)**Size(bit)**|(% style="width:50px" %)2bits|(% style="width:50px" %)1bit|(% style="width:100px" %)5 bits
245 +|=(% style="width: 79px;" %)**Value**|(% style="width:55px" %)[[MOD>>||anchor="H3.2.7SetPositioningMode"]]|(% style="width:47px" %)[[LON>>||anchor="HLON:"]]|(% style="width:140px" %)Firmware version 
331 331  
332 332  **Example:** Payload: 0x02863D68 FAC29BAF 4B45 60 0202 011A 
333 333  
... ... @@ -343,14 +343,17 @@
343 343  
344 344  1.  When power is low (<2.84v), GPS won't be able to get location info and GPS feature will be disabled and the location field will be filled with 0x0FFFFFFF, 0x0FFFFFFF.
345 345  
346 -2.  In this mode, the total payload will be 15 bytes, while US915/AU915 DR0 accepts only 11 bytes payload. In this case, the payload on server will be ignore and shows as below:
261 +2.  In firmware version v1.5, Roll & Pitch is disabled by default.
347 347  
263 +3.  When enable 9-axis motion sensor, the total payload will be 15 bytes, while US915/AU915 DR0 accept only 11 bytes payload. In this case, the payload on server will be ignore and shows as below:
348 348  
265 +
349 349  [[image:1664502116362-706.png]]
350 350  
351 351  
352 -3.  While GPS can't get location info after timeout(FTIME Parameter), the latitude and longitude will be filled with all 0x00:
353 353  
270 +4.  While GPS can't get location info after timeout(FTIME Parameter), the latitude and longitude will be filled with all 0x00:
271 +
354 354  [[image:1664502166010-515.png]]
355 355  
356 356  
... ... @@ -357,17 +357,18 @@
357 357  
358 358  ==== (% style="color:blue" %)**Alarm:**(%%) ====
359 359  
360 -**Example: ** 0x4B & 0x40 >> 6 = 0x01
278 +Example:  0x4B & 0x40 >> 6 = 0x01
361 361  
362 362  
363 363  ==== (% style="color:blue" %)**BAT:**(%%) ====
364 364  
365 -**Example: ** 0x4B45 & 0x3FFF ⇒ 2885 (mV).
283 +Example:  0x0CDD & 0x3FFF ⇒ 3293 (mV).
366 366  
367 367  (((
368 -The battery info shows the battery voltage, User can use the below mapping to indicate the battery in percentage: \
286 +The battery info shows the current voltage, for (% style="color:blue" %)**TrackerD**(%%) version which powered by li-on battery. User can use below mapping to indicate the battery in percentage: \
369 369  )))
370 370  
289 +
371 371  * > 4.0v :  80% ~~ 100%
372 372  * 3.85v ~~3.99v:  60% ~~ 80%
373 373  * 3.70v ~~ 3.84v:  40% ~~ 60%
... ... @@ -375,37 +375,20 @@
375 375  * < 3.39v:  0~~20%
376 376  
377 377  
378 -==== (% style="color:blue" %)**MOD:**(%%) ====
379 -
380 -**Example: ** (0x60>>6)& 0x3f =1.
381 -
382 -**Set the format of GPS data uplink link:**
383 -
384 -(% style="color:#037691" %)**0x00:** (%%) Enable uploading on-board Temperature and humidity values
385 -(% style="color:#037691" %)**0x01: ** (%%) Disable uploading on-board Temperature and humidity values
386 -
387 -
388 -**Set the format of BLE data uplink link:**
389 -
390 -(% style="color:#037691" %)**0x01: ** (%%) BLE Positioning with Strongest iBeacon
391 -
392 -
393 393  ==== (% style="color:blue" %)**LON:**(%%) ====
394 394  
395 -**Example:** (0x60>>5) & 0x01=1.
396 -
299 +
397 397  Enable/Disable LED activity for uplink
398 398  
399 399  (((
400 -(% style="color:#037691" %)**0x00:**  (%%) Disable LED indicator.
303 +0x00:  Disable LED indicator.
401 401  )))
402 402  
403 403  (((
404 -(% style="color:#037691" %)**0x01:**  (%%) Enable LED indicator (Default Value)
307 +0x01:  Enable LED indicator (Default Value)
405 405  )))
406 406  
407 407  
408 -
409 409  ==== (% style="color:blue" %)**Hum:**(%%) ====
410 410  
411 411  0202 = //if (0x0202 & 0x8000 = 0 ):  value =// 0x0202 / 100 = +514 ⇒ 51.4 degree
... ... @@ -417,52 +417,15 @@
417 417  
418 418  
419 419  
420 -=== 2.4.3  Uplink FPORT~=3, Realtime GNSS Positioning (Default Mode) ===
322 +=== 2.3.3 Uplink FPORT~= , History GNSS Positioning ===
421 421  
422 422  
423 -The default uplink payload includes total 11 bytes (**AT+SMOD=1,1,0**). The payload is the first 11 bytes of Uplink FPORT=2, real-time GNSS positioning, (remove the temp and humidity)
424 424  
326 +=== 2.3.4 BLE positioning Payload(Fport2) ===
425 425  
426 -(% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:480px" %)
427 -|=(% scope="row" style="width: 50px;" %)(((
428 -**Size(bytes)**
429 -)))|(% style="width:60px" %)4|(% style="width:70px" %)4|(% style="width:80px" %)2|(% style="width:73px" %)1
430 -|=(% style="width: 69px;" %)**Value**|(% style="width:76px" %)[[Latitude>>||anchor="HLocationinfo:"]]|(% style="width:87px" %)[[Longitude>>||anchor="HLocationinfo:"]]|(% style="width:76px" %)(((
431 -[[Alarm & BAT>>||anchor="HAlarm26BAT:"]]
432 -)))|(% style="width:73px" %)[[FLAG>>||anchor="HFLAG:"]]
433 433  
434 -(% class="wikigeneratedid" %)
435 -[[image:1665301687277-443.png]]
329 +Different MODE has different payload:  (% style="color:blue" %)**MODE=2**
436 436  
437 -
438 -
439 -=== 2.4.4  Uplink FPORT~=4, History GNSS Positioning ===
440 -
441 -
442 -Set [[PNACKMD=1>>||anchor="H3.2.10A0A0AutoSendNone-ACKmessages"]], and TrackerD will wait for ACK for every uplink, when there is no LoRaWAN network, TrackerD will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
443 -
444 -
445 -(% style="color:red" %)**Note for this mode:**
446 -
447 -* a) TrackerD will do an ACK check for data records sending to make sure every data arrive server.
448 -* b) TrackerD will send data in (% style="color:blue" %)**CONFIRMED Mode**(%%) when PNACKMD=1, but TrackerD won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink, if TrackerD gets an ACK, TrackerD will consider there is a network connection and resend all NONE-ACK Messages.
449 -* c) the total payload will be 15 bytes, while US915/AU915 DR0 accepts only 11 bytes of payload. In this case (DR0 of US915/AU915), the payload on server will show NULL
450 -
451 -The payload is 15 bytes, as below.
452 -
453 -(% border="1.5" style="background-color:#ffffcc; color:green; width:520px" %)
454 -|=(% scope="row" %)(((
455 -**Size(bytes)**
456 -)))|4|4|2|1|1|1|1|1
457 -|=**Value**|Latitude|Longitude|Year|Month|Day|Hous|Min|Sen
458 -
459 -[[image:image-20221009160309-2.png]]
460 -
461 -
462 -
463 -=== 2.4.5  Uplink FPORT~=6, BLE Positioning with Strongest iBeacon ===
464 -
465 -
466 466  (% border="1.5" cellspacing="3" style="background-color:#ffffcc; color:green; width:450px" %)
467 467  |=(% scope="row" style="width: 60px;" %)(((
468 468  **Size(bytes)**
... ... @@ -479,6 +479,7 @@
479 479  [[Alarm & BAT>>||anchor="HAlarm26BAT:"]]
480 480  )))|(% style="width:15px" %)[[FLAG>>||anchor="HFLAG:"]]
481 481  
347 +
482 482  [[image:1664502425687-834.png]]
483 483  
484 484  
... ... @@ -492,7 +492,7 @@
492 492  
493 493  
494 494  
495 -=== 2.4. Add Payload format in TTN V3 ===
361 +=== 2.3.5 Add Payload format in TTN V3 ===
496 496  
497 497  
498 498  In TTN V3, use can add a custom payload so it shows friendly.
... ... @@ -503,7 +503,7 @@
503 503  [[image:1664502649601-895.png]]
504 504  
505 505  
506 -Add the decoder from this link:  [[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/TrackerD>>https://github.com/dragino/dragino-end-node-decoder/tree/main/TrackerD]]
372 +Add the decoder from this link:
507 507  
508 508  
509 509  Save the change the uplink message will be parsed. As below:
... ... @@ -512,7 +512,7 @@
512 512  
513 513  
514 514  
515 -== 2.5 Integrate with Datacake ==
381 +== 2.4 Integrate with Datacake ==
516 516  
517 517  
518 518  (((
... ... @@ -528,7 +528,7 @@
528 528  
529 529  
530 530  
531 -== 2.6 Integrate with Tago ==
397 +== 2.5 Integrate with Tago ==
532 532  
533 533  
534 534  (((
... ... @@ -544,25 +544,9 @@
544 544  
545 545  
546 546  
547 -== 2. Datalog Feature ==
413 +== 2.6 Alarm Mode ==
548 548  
549 549  
550 -total 273 entries,by default,
551 -
552 -User can set [[PNACKMD=1>>||anchor="H3.2.10A0A0AutoSendNone-ACKmessages"]], to enable Datalog feature.
553 -
554 -Example use case.
555 -
556 -[[image:image-20221009234703-2.png||height="328" width="899"]]
557 -
558 -
559 -[[image:image-20221009234629-1.png||height="390" width="577"]]
560 -
561 -
562 -
563 -== 2.8 Alarm Mode ==
564 -
565 -
566 566  (((
567 567  User can push the (% style="color:red" %)**RED button**(%%) by more than 5 seconds to enter Alarm Mode.
568 568  )))
... ... @@ -580,6 +580,7 @@
580 580  * Server send a downlink command to exit.
581 581  * User fast press the RED button 10 times.
582 582  
433 +
583 583  (((
584 584  When exit alarm mode, (% style="color:red" %)**RED LED**(%%) will light up for 5 seconds, indicating that the alarm mode is exited. And the alert flag will be set to false.
585 585  )))
... ... @@ -586,16 +586,13 @@
586 586  
587 587  
588 588  
589 -== 2.9 Transport Mode ==
440 +== 2.7 Sports Mode ==
590 590  
591 591  
592 -In Transport Mode, TrackerD will check if there is motion. If there is no motion, device will send uplinks every 20 minutes. If there is motion, device will send uplink every 5 minutes.
593 593  
444 +== 2.8 LED Status ==
594 594  
595 595  
596 -== 2.10 LED Status ==
597 -
598 -
599 599  (% border="1.5" style="background-color:#ffffcc; color:green; width:500px" %)
600 600  |=(% style="width: 150px;" %)**Event**|=(% style="width: 200px;" %)**Action**|=(% style="width: 150px;" %)**AT+LON to control on/off**
601 601  |(% style="width:157px" %)**Power On**|(% style="width:271px" %)(% style="color:blue" %)**BLUE, **(% style="color:red" %)**RED , **(% style="color:green" %)**Green** flash once|(% style="width:202px" %)N/A
... ... @@ -610,9 +610,11 @@
610 610  |(% style="width:157px" %)**Get Downlink**|(% style="width:271px" %)(% style="color:green" %)**GREEN**(%%) led on 1 second|(% style="width:202px" %)Yes
611 611  |(% style="width:157px" %)**Movement Detect**|(% style="width:271px" %)(% style="color:red" %)**RED **(%%)led on 500ms|(% style="width:202px" %)N/A
612 612  
613 -== 2.11 Button Function ==
614 614  
615 615  
463 +== 2.9 Button Function ==
464 +
465 +
616 616  (% style="color:blue" %)**RESET button:**
617 617  
618 618  [[image:1664502835802-546.png]]
... ... @@ -631,9 +631,11 @@
631 631  |(% style="width:135px" %)Exit Alarm Mode|(% style="width:220px" %)Fast press the (% style="color:red" %)**RED** (%%)button 10 times|(% style="width:265px" %)Exit Alarm Mode
632 632  |(% style="width:135px" %)Enter Deep Sleep Mode|(% style="width:220px" %)Press and hold the button for 10 seconds, then quickly press the device 3 times to enter deep sleep|(% style="width:265px" %)This is the mode ship out from factory. CPU will be complete in sleep mode and no LoRa activity, only use before deploy.
633 633  
634 -== 2.12 USB Port Function ==
635 635  
636 636  
486 +== 2.10 USB Port Function ==
487 +
488 +
637 637  The USB interface of TrackerD has below functions:
638 638  
639 639  * Power on the device
... ... @@ -641,6 +641,9 @@
641 641  * [[Configure Device>>||anchor="H3.ConfigureTrackerDviaATcommandorLoRaWANdownlink"]]
642 642  * [[Upgrade Firmware>>||anchor="H5.UploadFirmware"]]
643 643  
496 +
497 +
498 +
644 644  = 3. Configure TrackerD via AT command or LoRaWAN downlink =
645 645  
646 646  
... ... @@ -713,16 +713,16 @@
713 713  
714 714  
715 715  
716 -=== 3.2.3 Set Transport Mode Packet transmission interval ===
571 +=== 3.2.3 Set Sports Mode Packet transmission interval ===
717 717  
718 718  
719 -Set Transport Mode packet transmit interval
574 +Set sports packet transmit interval
720 720  
721 721  * (% style="color:blue" %)**AT Command:**
722 722  
723 723  (% style="color:#037691" %)**AT+MTDC=xx. **
724 724  
725 -Example:  AT+MTDC=300000  **~-~->    ** Set Transport Mode Packet Interval to 300 seconds. TrackerD will send every 300 seconds in Transport mode, Default Value: 300000
580 +Example:  AT+MTDC=300000  **~-~->    ** Set Sports Mode Packet Interval to 300 seconds. TrackerD will send every 300 seconds in Sports mode, Default Value: 300000
726 726  
727 727  
728 728  * (% style="color:blue" %)**Downlink Payload (prefix 0x03):**
... ... @@ -762,16 +762,16 @@
762 762  
763 763  
764 764  
765 -=== 3.2.6 Disable/Enable Transport Mode ===
620 +=== 3.2.6 Disable/Enable movement detect (Debug Only) ===
766 766  
767 767  
768 -Users can use this feature to enable/disable Transport Mode.
623 +User can use this feature to check and set thread hole of movement detect
769 769  
770 770  * (% style="color:blue" %)**AT Command:**
771 771  
772 772  (% style="color:#037691" %)**AT+INTWK=xx.  (Disable (0), Enable (1), default:0)**
773 773  
774 -Example:  AT+ INTWK =1  **~-~->   ** Enable Transport Mode.
629 +Example:  AT+ INTWK =1  **~-~->   ** Enable detect movement.
775 775  
776 776  
777 777  * (% style="color:blue" %)**Downlink Payload (prefix 0xAF):**
... ... @@ -783,38 +783,35 @@
783 783  === 3.2.7 Set Positioning Mode ===
784 784  
785 785  
786 -SMOD define the how TrackerD scan and uplink data:
641 +SMOD define the how TrackerD scan and uplink date.
787 787  
643 +GPS室外定位模式:  设备默认模式,设备入网后会发送device当前模式下的信息,随后立即定位发送数据包(默认是3分钟定位,超过将发送无效数据),如果出现意外情况下,快速按键3下,将会发出报警消息(默认每分钟发送一次)。GPS还有一种logdata模式,在断网的情况下将数据存储下来,等到有网的时候,一次将数据以每10秒上报。
788 788  
789 -* (% style="color:blue" %)**AT Command:**
645 +BLE室内定位模式:  设备入网后会发送device当前模式下的信息,随后立即定位发送数据包(默认是5秒,超过将发送无效数据),如果出现意外情况下,快速按键3下,将会发出报警消息(默认每3分钟发送一次)。
790 790  
791 -(% style="color:#037691" %)**AT+SMOD=aa,bb,cc**
647 +GPS和BLE混动模式:设备入网后会发送device当前模式下的信息,随后立即判断是否在室内,如果是就进行BLE定位,不是就GPS定位。如果出现意外情况下,快速按键3下,将会发出报警消息(默认每分钟发送一次)。
792 792  
793 -(% style="color:#037691" %)** aa:**
649 +运动模式:  设备入网后会发送device当前模式下的信息,随后发送GPS定位数据,设备判断是否在运动,没有运动传感器没有检测到动作,立即进入静止状态(默认20分钟),如果产生运动,将每5分钟发送一次数据,再第五分钟后检测设备有误运动,无将切换到静止状态,有立即发送数据。
794 794  
795 -* (% style="color:red" %)**1: GPS ONLY(Factory Settings):    **(%%)only get and uplink GPS location info.
796 -* (% style="color:red" %)**2: BLE ONLY:              **(%%)Only obtain iBeacon info via BLE and uplink. Design for Indoor tracking.
797 -* (% style="color:red" %)**3: GPS/BLE Hybrid:   **(%%)Combination for Indoor and Outdoor tracking.Devices will try to search BLE iBeacon first. If device can't find the iBeacon, it will use GPS for positioning.
798 798  
799 -(% style="color:#037691" %)**bb:**
800 800  
801 -* (% style="color:red" %)**0 :  **(%%)GPS+ BAT+ State+Tem&Hum
802 -* (% style="color:red" %)**1 :**(%%)  GPS +BAT State
653 +* (% style="color:blue" %)**AT Command:**
803 803  
804 -(% style="color:#037691" %)**cc:   **
655 +(% style="color:#037691" %)**AT+SMOD=xx. **
805 805  
806 -* (% style="color:red" %)**1 : **(%%) (iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State  
807 807  
808 -(% style="color:blue" %)**Example:**
658 + **Example:**
809 809  
810 - AT+ SMOD =1,0 ,0 ~-~->  GPS+ BAT+ State+Tem&Hum
811 - AT+ SMOD =1,1,0 ~-~->  GPS +BAT State
812 - AT+ SMOD =2,0,1 ~-~->  (iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State
660 + AT+ SMOD =1,0  **~-~-> ** GPS+ BAT+ State+Tem&Hum
813 813  
662 + AT+ SMOD =1,1    **~-~->**  GPS +BAT State
814 814  
664 + AT+ SMOD =2,3    **~-~->**  (iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State。
665 +
666 +
815 815  * (% style="color:blue" %)**Downlink Payload (prefix 0xA5):**
816 816  
817 -(% style="color:#037691" %)**0xA5 01 00 00**    (%%) ~/~/  Same as AT+ SMOD =1,0,0
669 +(% style="color:#037691" %)**0xA5 01 00**    (%%) ~/~/  Same as AT+ SMOD =1,0
818 818  
819 819  
820 820  
... ... @@ -831,7 +831,7 @@
831 831  
832 832  (% style="color:#037691" %)**AT+FTIME=xx**  (%%) **~-~-> ** Set to use xx as max fix time.
833 833  
834 -**Example:**  AT+FTIME=150
686 +Example:  AT+FTIME=150
835 835  
836 836  
837 837  * (% style="color:blue" %)**Downlink Payload (prefix 0xAA):**
... ... @@ -840,7 +840,7 @@
840 840  
841 841  
842 842  
843 -=== 3.2.9 Set PDOP value for GPS fix accuracy ===
695 +=== 3.3.9 Set PDOP value for GPS fix accuracy ===
844 844  
845 845  
846 846  PDOP(Position Dilution of Precision) filter, TrackerD will only accept GPS data with a lower PDOP value than pre-configure PDOP value. If device can't get a valid GPS packet within FTIME timeout, it will use the GPS data with lowest PDOP value to server.
... ... @@ -868,7 +868,7 @@
868 868  
869 869  * (% style="color:blue" %)**AT Command:**
870 870  
871 -(% style="color:#037691" %)**AT+CFM=xx**
723 +(% style="color:#037691" %)**AT+CFM=xx. **
872 872  
873 873  
874 874  **~ Example:**
... ... @@ -884,27 +884,6 @@
884 884  
885 885  
886 886  
887 -=== 3.2.10  Auto Send None-ACK messages ===
888 -
889 -
890 -TrackerD will wait for ACK for each uplink, If TrackerD doesn't get ACK from the IoT server, it will consider the message doesn't arrive server and store it. TrackerD keeps sending messages in normal periodically. Once TrackerD gets ACK from a server, it will consider the network is ok and start to send the not-arrive message.
891 -
892 -
893 -* (% style="color:blue" %)**AT Command: AT+PNACKMD**
894 -
895 -The default factory setting is 0.
896 -
897 -
898 -**Command Example Function Response:**
899 -
900 -(% style="color:#037691" %)**AT+PNACKMD=1**  (%%) ~/~/  Poll None-ACK message OK
901 -
902 -
903 -* (% style="color:blue" %)**Downlink Command: 0x34**
904 -
905 -Example: 0x3401  ~/~/  Same as AT+PNACKMD=1
906 -
907 -
908 908  = 4. Setting for Different Scenarios =
909 909  
910 910  
... ... @@ -947,7 +947,7 @@
947 947  
948 948  (% style="color:blue" %)**Step5:** (%%) Select the firmware file (.bin format), com port and proper SPI configure. Clink Start. Bin file location:
949 949  
950 -[[https:~~/~~/github.com/dragino/TrackerD/releases>>https://github.com/dragino/TrackerD/releases]]
781 +[[https:~~/~~/www.dropbox.com/sh/733s8xlwahhqg1d/AABxDz80lBVX_to8zNuUQWFja?dl=0>>url:https://www.dropbox.com/sh/733s8xlwahhqg1d/AABxDz80lBVX_to8zNuUQWFja?dl=0]]
951 951  
952 952  
953 953  Users need to use below files:
... ... @@ -984,7 +984,6 @@
984 984  [[image:1664503635019-941.png]]
985 985  
986 986  
987 -
988 988  * (% style="color:#037691" %)**Go to tools ~-~-> Boards ~-~-> Boards Manager**,(%%) **find the esp32 information and install it.**
989 989  
990 990  [[image:1664503715811-892.png]]
... ... @@ -1068,15 +1068,16 @@
1068 1068  
1069 1069  
1070 1070  
901 +
1071 1071  = 9.  Packing Info =
1072 1072  
1073 1073  
1074 -(% style="color:#037691" %)**Package Includes**:
905 +**(% style="color:#037691" %)Package Includes**:
1075 1075  
1076 1076  * TrackerD LoRaWAN GPS/BLE Tracker x 1
1077 1077  * USB recharge & program cable x 1
1078 1078  
1079 -(% style="color:#037691" %)**Dimensions and Weight**:
910 +**(% style="color:#037691" %)Dimensions and Weight**:
1080 1080  
1081 1081  * Device Size: 85 x 48 x 15 cm
1082 1082  * Weight: 50g
... ... @@ -1083,6 +1083,7 @@
1083 1083  
1084 1084  
1085 1085  
917 +
1086 1086  = 10. Support =
1087 1087  
1088 1088  
... ... @@ -1091,6 +1091,7 @@
1091 1091  
1092 1092  
1093 1093  
926 +
1094 1094  = 11.  Reference =
1095 1095  
1096 1096  
... ... @@ -1098,4 +1098,5 @@
1098 1098  * **[[Source Code>>https://github.com/dragino/TrackerD]] **
1099 1099  * [[**Hardware Source**>>https://www.dropbox.com/sh/orwoy6cecb89m4e/AAD37sRuUrvKsHgAJxuVTkB5a?dl=0]]
1100 1100  
934 +
1101 1101  
1665301570342-765.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -31.6 KB
Content
1665301636888-168.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -36.6 KB
Content
1665301687277-443.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -22.6 KB
Content
1665301786397-168.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -22.6 KB
Content
image-20221006181316-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -17.7 KB
Content
image-20221006181357-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -88.0 KB
Content
image-20221009160220-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -46.4 KB
Content
image-20221009160309-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -57.2 KB
Content
image-20221009234629-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -222.9 KB
Content
image-20221009234703-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -136.4 KB
Content