Skip to Content
Last modified by Xiaoling on 2025/04/27 16:48
From version 78.4
edited by Xiaoling
on 2022/10/14 08:58
Change comment: There is no comment for this version
To version 113.3
edited by Xiaoling
on 2022/11/09 15:44
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -127,7 +127,7 @@
127 127  
128 128  
129 129  
130 -= 2.1 Use TrackerD =
130 += 2.  Use TrackerD =
131 131  
132 132  
133 133  == 2.1 How it works? ==
... ... @@ -195,9 +195,9 @@
195 195  
196 196  Users can set TrackerD to different Positioning Mode for different applications. Below mod are supported.
197 197  
198 -* (% style="color:#037691" %)**GPS ONLY(Factory Settings):    **(%%)only get and uplink GPS location info.
199 -* (% style="color:#037691" %)**BLE ONLY:              **(%%)Only obtain iBeacon info via BLE and uplink. Design for Indoor tracking.
200 -* (% style="color:#037691" %)**GPS/BLE Hybrid:   **(%%)Combination for Indoor and Outdoor tracking.Devices will try to search BLE iBeacon first. If device can't find the iBeacon, it will use GPS for positioning.
198 +* (% style="color:#037691" %)**GPS ONLY(Factory Settings):    **(%%)Only get and uplink GPS location info.
199 +* (% style="color:#037691" %)**BLE or WiFi ONLY:            **(%%)** **Only obtain iBeacon info via BLE and uplink  or obtain wifi ssid info via WiFi and uplink. Design for Indoor tracking.
200 +* (% style="color:#037691" %)**GPS/BLE Hybrid:                        **(%%)Combination for Indoor and Outdoor tracking. Devices will try to search BLE iBeacon first. If device can't find the iBeacon, it will use GPS for positioning.
201 201  
202 202  Users can switch modes by [[changing SMOD>>||anchor="H3.2.7SetPositioningMode"]].
203 203  
... ... @@ -214,8 +214,8 @@
214 214  Use can also get the Device Status uplink through the downlink command: **Downlink:  0x2301**
215 215  
216 216  
217 -(% border="1.5" style="background-color:#ffffcc; color:green; width:520px" %)
218 -|=(% scope="row" style="width: 108px;" %)**Size(bytes)**|=(% style="width: 82px;" %)**1**|=(% style="width: 83px;" %)**2**|=(% style="width: 94px;" %)**1**|=(% style="width: 84px;" %)**1**|=(% style="width: 44px;" %)2|=(% style="width: 63px;" %)**2**|=(% style="width: 60px;" %)1
217 +(% border="1.5" style="background-color:#ffffcc; color:green; width:440px" %)
218 +|=(% style="width: 60px;" %)**Size(bytes)**|=(% style="width: 70px;" %)**1**|=(% style="width: 70px;" %)**2**|=(% style="width: 70px;" %)**1**|=(% style="width: 50px;" %)**1**|=(% style="width: 30px;" %)2|=(% style="width: 40px;" %)**2**|=(% style="width: 40px;" %)1
219 219  |=(% style="width: 108px;" %)**Value**|(% style="width:82px" %)Sensor Model|(% style="width:83px" %)Firmware Version|(% style="width:94px" %)Frequency Band|(% style="width:84px" %)Sub-band|(% style="width:44px" %)BAT|(% style="width:63px" %)SMOD|(% style="width:60px" %)Status
220 220  
221 221  [[image:1665301570342-765.png]]
... ... @@ -259,12 +259,11 @@
259 259  Use can also get the Device Status uplink through the downlink command:
260 260  
261 261  
262 -
263 263  (% style="color:#037691" %)**SMOD Field (total 1 byte)**(%%)：0x40
264 264  
265 -(% border="1.5" style="background-color:#ffffcc; color:green; width:420px" %)
266 -|(% style="width:75px" %)**Size(bit)**|(% style="width:64px" %)2bits|(% style="width:137px" %)2bit|(% style="width:142px" %)4bit
267 -|(% style="width:75px" %)**Value**|(% style="width:64px" %)SMOD|(% style="width:137px" %)GPS_Settings|(% style="width:142px" %)BLE_Settings
264 +(% border="1.5" style="background-color:#ffffcc; color:green; width:270px" %)
265 +|=(% scope="row" style="width: 60px;" %)**Size(bit)**|(% style="width:50px" %)2bits|(% style="width:80px" %)2bit|(% style="width:80px" %)4bit
266 +|=(% style="width: 75px;" %)**Value**|(% style="width:64px" %)SMOD|(% style="width:104px" %)GPS_Settings|(% style="width:103px" %)BLE_Settings
268 268  
269 269  (% style="color:blue" %)** SMOD：**
270 270  
... ... @@ -286,13 +286,14 @@
286 286  
287 287  (% style="color:red" %)** 1: ** (%%) BLE Positioning with Strongest iBeacon
288 288  
288 +(% style="color:red" %)** 2：**  (%%)WiFi Positioning with Strongest WiFi SSID(% style="color:blue" %)(V1.4.1 Version support this function later)(%%)  
289 289  
290 290  
291 291  (% style="color:#037691" %)**Status Field (total 1 byte)**(%%):  0x02
292 292  
293 -(% border="1.5" style="background-color:#ffffcc; color:green; width:417px" %)
294 -|(% style="width:77px" %)**Size(bit)**|(% style="width:70px" %)5 Bits|(% style="width:92px" %)1 Bit|(% style="width:48px" %)1 Bit|(% style="width:126px" %)1 Bit
295 -|(% style="width:77px" %)**Value**|(% style="width:70px" %)Reserve|(% style="width:92px" %)[[PNACKMD>>||anchor="H2.4.4A0UplinkFPORT3D42CHistoryGNSSPositioning"]]|(% style="width:48px" %)[[LON>>||anchor="H3.2.5Disable2FEnableLEDflash"]]|(% style="width:126px" %)[[Transport Mode>>||anchor="H2.9TransportMode"]]
293 +(% border="1.5" style="background-color:#ffffcc; color:green; width:260px" %)
294 +|=(% scope="row" style="width: 50px;" %)**Size(bit)**|(% style="width:50px" %)5 Bits|(% style="width:60px" %)1 Bit|(% style="width:20px" %)1 Bit|(% style="width:80px" %)1 Bit
295 +|=(% style="width: 77px;" %)**Value**|(% style="width:70px" %)Reserve|(% style="width:92px" %)[[PNACKMD>>||anchor="H2.4.4A0UplinkFPORT3D42CHistoryGNSSPositioning"]]|(% style="width:48px" %)[[LON>>||anchor="H3.2.5Disable2FEnableLEDflash"]]|(% style="width:126px" %)[[Transport Mode>>||anchor="H2.9TransportMode"]]
296 296  
297 297  
298 298  
... ... @@ -302,12 +302,12 @@
302 302  Users can use **AT+SMOD=1,0,0** to enable uploading on-board Temperature and humidity values, and the total payload will be 15 bytes,
303 303  
304 304  
305 -(% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:480px" %)
306 -|=(% scope="row" style="width: 50px;" %)(((
305 +(% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:320px" %)
306 +|=(% scope="row" style="width: 60px;" %)(((
307 307  **Size(bytes)**
308 -)))|(% style="width:60px" %)4|(% style="width:70px" %)4|(% style="width:80px" %)2|(% style="width:73px" %)1|(% style="width:40px" %)(((
308 +)))|(% style="width:50px" %)4|(% style="width:50px" %)4|(% style="width:70px" %)2|(% style="width:30px" %)1|(% style="width:30px" %)(((
309 309  2
310 -)))|(% style="width:87px" %)(((
310 +)))|(% style="width:30px" %)(((
311 311  2
312 312  )))
313 313  |=(% style="width: 69px;" %)**Value**|(% style="width:76px" %)[[Latitude>>||anchor="HLocationinfo:"]]|(% style="width:87px" %)[[Longitude>>||anchor="HLocationinfo:"]]|(% style="width:76px" %)(((
... ... @@ -327,8 +327,8 @@
327 327  
328 328  ==== (% style="color:blue" %)**FLAG:**(%%) ====
329 329  
330 -(% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:250px" %)
331 -|=(% scope="row" style="width: 50px;" %)**Size(bit)**|(% style="width:50px" %)2bits|(% style="width:50px" %)1bit
330 +(% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:120px" %)
331 +|=(% scope="row" style="width: 50px;" %)**Size(bit)**|(% style="width:30px" %)2bits|(% style="width:30px" %)1bit
332 332  |=(% style="width: 79px;" %)**Value**|(% style="width:55px" %)[[MOD>>||anchor="H3.2.7SetPositioningMode"]]|(% style="width:47px" %)[[LON>>||anchor="HLON:"]]
333 333  
334 334  **Example:** Payload: 0x02863D68 FAC29BAF 4B45 60 0202 011A 
... ... @@ -339,8 +339,6 @@
339 339  * Latitude: 02863D68  ⇒  //if (0x//02863D68//& 0x80000000 = 0 )~://  //value = 02863D68 /1000000 = 42.351976//
340 340  * Longitude: FAC29BAF  ⇒ //if (0x//FAC29BAF// & 0x80000000 = 1 )~://  //value = (0x//FAC29BAF// – 0x 100000000)/1000000 =//-87.9094//57//
341 341  
342 -
343 -
344 344  (% style="color:red" %)**Important note:**
345 345  
346 346  1.  When power is low (<2.84v), GPS won't be able to get location info and GPS feature will be disabled and the location field will be filled with 0x0FFFFFFF, 0x0FFFFFFF.
... ... @@ -380,7 +380,7 @@
380 380  
381 381  ==== (% style="color:blue" %)**MOD:**(%%) ====
382 382  
383 -**Example: ** (0x60>>6)& 0x3f =1.
381 +**Example: ** (0x60>>6) & 0x3f =1
384 384  
385 385  **Set the format of GPS data uplink link：**
386 386  
... ... @@ -408,7 +408,6 @@
408 408  )))
409 409  
410 410  
411 -
412 412  ==== (% style="color:blue" %)**Hum:**(%%) ====
413 413  
414 414  0202 = //if (0x0202 & 0x8000 = 0 ):  value =// 0x0202 / 100 = +514 ⇒ 51.4 degree
... ... @@ -426,10 +426,10 @@
426 426  The default uplink payload includes total 11 bytes (**AT+SMOD=1,1,0**). The payload is the first 11 bytes of Uplink FPORT=2, real-time GNSS positioning, (remove the temp and humidity)
427 427  
428 428  
429 -(% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:480px" %)
430 -|=(% scope="row" style="width: 50px;" %)(((
426 +(% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:300px" %)
427 +|=(% scope="row" style="width: 60px;" %)(((
431 431  **Size(bytes)**
432 -)))|(% style="width:60px" %)4|(% style="width:70px" %)4|(% style="width:80px" %)2|(% style="width:73px" %)1
429 +)))|(% style="width:60px" %)4|(% style="width:60px" %)4|(% style="width:60px" %)2|(% style="width:50px" %)1
433 433  |=(% style="width: 69px;" %)**Value**|(% style="width:76px" %)[[Latitude>>||anchor="HLocationinfo:"]]|(% style="width:87px" %)[[Longitude>>||anchor="HLocationinfo:"]]|(% style="width:76px" %)(((
434 434  [[Alarm & BAT>>||anchor="HAlarm26BAT:"]]
435 435  )))|(% style="width:73px" %)[[FLAG>>||anchor="HFLAG:"]]
... ... @@ -448,12 +448,12 @@
448 448  (% style="color:red" %)**Note for this mode:**
449 449  
450 450  * a) TrackerD will do an ACK check for data records sending to make sure every data arrive server.
451 -* b) TrackerD will send data in (% style="color:blue" %)**CONFIRMED Mode**(%%) when PNACKMD=1, but TrackerD won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink, if TrackerD gets an ACK, TrackerD will consider there is a network connection and resend all NONE-ACK Messages.
448 +* b) TrackerD will send data in CONFIRMED Mode when PNACKMD=1 and CFM=1, but TrackerD won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink, if TrackerD gets an ACK, TrackerD will consider there is a network connection and resend all NONE-ACK Messages.
452 452  * c) the total payload will be 15 bytes, while US915/AU915 DR0 accepts only 11 bytes of payload. In this case (DR0 of US915/AU915), the payload on server will show NULL
453 453  
454 454  The payload is 15 bytes, as below.
455 455  
456 -(% border="1.5" style="background-color:#ffffcc; color:green; width:520px" %)
453 +(% border="1.5" style="background-color:#ffffcc; color:green; width:500px" %)
457 457  |=(% scope="row" %)(((
458 458  **Size(bytes)**
459 459  )))|4|4|2|1|1|1|1|1
... ... @@ -466,6 +466,11 @@
466 466  === 2.4.5  Uplink FPORT~=6, BLE Positioning with Strongest iBeacon ===
467 467  
468 468  
466 +TrackerD supports BLE scans for indoor positioning. User can set [[**SMOD**>>||anchor="H3.2.7SetPositioningMode"]] to **BLE pure** or **GPS/BLE hybrid** so TrackerD will scan BLE iBeacon and find the strongest iBeacon info and uplink.
467 +
468 +User can set **[[BLEMASK>>||anchor="H3.2.11A0SetBLEMASKtofilterBLEiBeacon"]]** so TrackerD will only search the iBeacons which have UUID that match the BLEMASK settings.
469 +
470 +
469 469  (% border="1.5" cellspacing="3" style="background-color:#ffffcc; color:green; width:450px" %)
470 470  |=(% scope="row" style="width: 60px;" %)(((
471 471  **Size(bytes)**
... ... @@ -485,7 +485,7 @@
485 485  [[image:1664502425687-834.png]]
486 486  
487 487  
488 -* (% style="color:#037691" %)**BAT: ** (%%) Ex1: 0x4B45 & 0x3FFF ⇒ 3901 (mV).
490 +* (% style="color:#037691" %)**BAT: ** (%%) Ex1:0x4B45 & 0x3FFF ⇒ 3901 (mV).
489 489  * (% style="color:#037691" %)**MODE:   **(%%)Define the payload format.
490 490  * (% style="color:#037691" %)**UUID:     **(%%)The uuid from the strongest iBeacon.
491 491  * (% style="color:#037691" %)**MAJOR:** (%%) The MAJOR from the strongest iBeacon.
... ... @@ -495,11 +495,35 @@
495 495  
496 496  
497 497  
498 -=== 2.4.6  Add Payload format in TTN V3 ===
500 +=== 2.4.6  Uplink FPORT~=8, WiFi Positioning with Strongest WiFi SSID（Since firmware 1.4.1） ===
499 499  
500 500  
501 -In TTN V3, use can add a custom payload so it shows friendly.
503 +TrackerD supports WiFi scans for indoor positioning. User can set [[**SMOD**>>||anchor="H3.2.7SetPositioningMode"]] to **WiFi** so TrackerD will scan WiFi and find the strongest WiFi info and uplink.
502 502  
505 +
506 +(% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:371.222px" %)
507 +|=(% scope="row" style="width: 60px;" %)(((
508 +**Size(bytes)**
509 +)))|(% style="width:60px" %)6|(% style="width:60px" %)4|(% style="width:79px" %)2|(% style="width:66px" %)1
510 +|=(% style="width: 69px;" %)**Value**|(% style="width:76px" %)SSID|(% style="width:87px" %)RSSI|(% style="width:79px" %)(((
511 +[[Alarm & BAT>>||anchor="HAlarm26BAT:"]]
512 +)))|(% style="width:66px" %)[[FLAG>>||anchor="HFLAG:"]]
513 +
514 +(% class="wikigeneratedid" %)
515 +[[image:1667288597595-714.png||height="212" width="1151"]]
516 +
517 +
518 +* (% style="color:#037691" %)**BAT: ** (%%) Ex1:0x4B45 & 0x3FFF ⇒ 3901 (mV).
519 +* (% style="color:#037691" %)**SSID:      **(%%)WiFi name.
520 +* (% style="color:#037691" %)**RSSI:      **(%%)The RSSI from the strongest WiFi.
521 +
522 +
523 +
524 +=== 2.4.7  Add Payload format in TTN V3 ===
525 +
526 +
527 +In TTN V3, user can add a custom payload so it shows friendly.
528 +
503 503  In the page (% style="color:#037691" %)**Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder**
504 504  
505 505  
... ... @@ -506,8 +506,9 @@
506 506  [[image:1664502649601-895.png]]
507 507  
508 508  
509 -Add the decoder from this link:
535 +Add the decoder from this link: 
510 510  
537 +[[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/TrackerD>>https://github.com/dragino/dragino-end-node-decoder/tree/main/TrackerD]]
511 511  
512 512  Save the change the uplink message will be parsed. As below:
513 513  
... ... @@ -518,15 +518,10 @@
518 518  == 2.5 Integrate with Datacake ==
519 519  
520 520  
521 -(((
522 522  After TrackerD sends data to LoRaWAN server such as TTN, use can pass the data to Datacake and plot out, currently only support GPS plot.
523 -)))
524 524  
525 -(((
526 526  Instruction is here:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20Data%20Cake/#H7.Example~~-~~-AddTrackerDGPSTrackingInDataCake>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20Data%20Cake/#H7.Example--AddTrackerDGPSTrackingInDataCake]]
527 -)))
528 528  
529 -
530 530  [[image:1664502695771-538.png]]
531 531  
532 532  
... ... @@ -534,15 +534,12 @@
534 534  == 2.6 Integrate with Tago ==
535 535  
536 536  
537 -(((
538 -After TrackerD sends data to LoRaWAN server such as TTN, use can pass the data to Datacake and plot out, currently only support GPS plot.
539 -)))
559 +After TrackerD sends data to LoRaWAN server such as TTN, user can pass the data to Datacake and plot out, currently only support GPS plot.
540 540  
541 -(((
542 542  Instruction is here: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Tago.IO/#H3.A0Example-CreateTrackerD2FLGT92positioningwidget>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Tago.IO/#H3.A0Example-CreateTrackerD2FLGT92positioningwidget]]
543 -)))
544 544  
545 545  
564 +
546 546  [[image:1664502715371-321.png]]
547 547  
548 548  
... ... @@ -572,7 +572,7 @@
572 572  
573 573  
574 574  (((
575 -Once enter Alarm mode, the (% style="color:green" %)**GREEN LED**(%%) will flash 3 times, the buzzer will alarm for 5 seconds, then TrackerD will immediately send a packet without location info and then send a data packet with GPS positioning information. After that, the device will send 60 packets at 1-minute intervals. The Alarm flag in the payload will be set for the next 60 packets unless exit alert mode.
594 +Once enter Alarm mode, the (% style="color:green" %)**GREEN LED**(%%) will flash 3 times, the buzzer will alarm for 5 seconds, then TrackerD will immediately send a packet without location info and then send a data packet with GPS positioning information. After that, the device will send 60 packets at 1-minute intervals. The Alarm flag in the payload will be set for the next 60 packets unless exits alert mode.
576 576  )))
577 577  
578 578  
... ... @@ -580,7 +580,7 @@
580 580  Two ways to exit alarm mode:
581 581  )))
582 582  
583 -* Server send a downlink command to exit.
602 +* Server sends a downlink command to exit.
584 584  * User fast press the RED button 10 times.
585 585  
586 586  (((
... ... @@ -630,8 +630,8 @@
630 630  [[image:1664502854406-763.png]]
631 631  
632 632  
633 -(% border="1.5" style="background-color:#ffffcc; color:green; width:520px" %)
634 -|=(% style="width: 100px;" %)**Function**|=(% style="width: 210px;" %)**Action**|=(% style="width: 210px;" %)**Description**
652 +(% border="1" style="background-color:#ffffcc; color:green; width:510px" %)
653 +|=(% style="width: 100px;" %)**Function**|=(% style="width: 205px;" %)**Action**|=(% style="width: 205px;" %)**Description**
635 635  |(% style="width:135px" %)Send Alarm|(% style="width:220px" %)Keep Pressing (% style="color:red" %)**RED**(%%) button for more than 5 seconds|(% style="width:265px" %)Enter Alarm Mode.  See [[Alarm Mode>>||anchor="H2.6AlarmMode"]]
636 636  |(% style="width:135px" %)Exit Alarm Mode|(% style="width:220px" %)Fast press the (% style="color:red" %)**RED** (%%)button 10 times|(% style="width:265px" %)Exit Alarm Mode
637 637  |(% style="width:135px" %)Enter Deep Sleep Mode|(% style="width:220px" %)Press and hold the button for 10 seconds, then quickly press the device 3 times to enter deep sleep|(% style="width:265px" %)This is the mode ship out from factory. CPU will be complete in sleep mode and no LoRa activity, only use before deploy.
... ... @@ -674,11 +674,9 @@
674 674  [[image:1664503022490-662.png]]
675 675  
676 676  
677 -
678 678  [[image:1664503035713-500.png]]
679 679  
680 680  
681 -
682 682  [[image:1664503047675-651.png]]
683 683  
684 684  
... ... @@ -736,7 +736,7 @@
736 736  
737 737  * (% style="color:blue" %)**Downlink Payload (prefix 0x03):**
738 738  
739 -(% style="color:#037691" %)**0x03 00 01 2C**  (%%) ~/~/  Same as AT+ MTDC=3000000
756 +(% style="color:#037691" %)**0x03 00 01 2C**  (%%) ~/~/  Same as AT+MTDC=3000000
740 740  
741 741  
742 742  
... ... @@ -780,12 +780,12 @@
780 780  
781 781  (% style="color:#037691" %)**AT+INTWK=xx.  (Disable (0), Enable (1), default:0)**
782 782  
783 -Example:  AT+ INTWK =1  **~-~->   ** Enable Transport Mode.
800 +Example:  AT+INTWK=1  **~-~->   ** Enable Transport Mode.
784 784  
785 785  
786 786  * (% style="color:blue" %)**Downlink Payload (prefix 0xAF):**
787 787  
788 -(% style="color:#037691" %)**0xAF 01 ** (%%) ~/~/  Same as AT+ INTWK =1
805 +(% style="color:#037691" %)**0xAF 01 ** (%%) ~/~/  Same as AT+INTWK=1
789 789  
790 790  
791 791  
... ... @@ -792,7 +792,7 @@
792 792  === 3.2.7 Set Positioning Mode ===
793 793  
794 794  
795 -SMOD define the how TrackerD scan and uplink data:
812 +SMOD define how TrackerD scan and uplink data:
796 796  
797 797  
798 798  * (% style="color:blue" %)**AT Command:**
... ... @@ -801,29 +801,38 @@
801 801  
802 802  (% style="color:#037691" %)** aa:**
803 803  
804 -* (% style="color:red" %)**1: GPS ONLY(Factory Settings):    **(%%)only get and uplink GPS location info.
805 -* (% style="color:red" %)**2: BLE ONLY:              **(%%)Only obtain iBeacon info via BLE and uplink. Design for Indoor tracking.
806 -* (% style="color:red" %)**3: GPS/BLE Hybrid:   **(%%)Combination for Indoor and Outdoor tracking.Devices will try to search BLE iBeacon first. If device can't find the iBeacon, it will use GPS for positioning.
821 +* (% style="color:red" %)**1: GPS ONLY(Factory Settings):    **(%%)Only get and uplink GPS location info.
807 807  
823 +* (% style="color:red" %)**2: BLE or WiFi ONLY:                     **(%%)Only obtain iBeacon info via BLE and uplink  or obtain WiFi ssid info via WiFi and uplink. Design for Indoor tracking.
824 +
825 +* (% style="color:red" %)**3: GPS/BLE Hybrid:                        **(%%)Combination for Indoor and Outdoor tracking.Devices will try to search BLE iBeacon first. If device can't find the iBeacon, it will use GPS for positioning.
826 +
808 808  (% style="color:#037691" %)**bb:**
809 809  
810 810  * (% style="color:red" %)**0 :  **(%%)GPS+ BAT+ State+Tem&Hum
830 +
811 811  * (% style="color:red" %)**1 :**(%%)  GPS +BAT State
812 812  
813 813  (% style="color:#037691" %)**cc:   **
814 814  
815 -* (% style="color:red" %)**1 : **(%%) (iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State  
835 +* (% style="color:red" %)**1 : **(%%) (iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State  
836 +
837 +* (% style="color:red" %)**2 : **(%%) (WiFi)SSID+Rssi+BAT+State ((% style="color:#037691" %)V1.4.1 Version support this function later(%%))  
816 816  
817 817  (% style="color:blue" %)**Example:**
818 818  
819 - AT+ SMOD =1,0 ,0 ~-~->  GPS+ BAT+ State+Tem&Hum
820 - AT+ SMOD =1,1,0 ~-~->  GPS +BAT State
821 - AT+ SMOD =2,0,1 ~-~->  (iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State
841 + AT+SMOD=1,0,0 ~-~->  GPS+ BAT+ State+Tem&Hum
822 822  
843 + AT+SMOD=1,1,0 ~-~->  GPS +BAT State
823 823  
845 + AT+SMOD=2,0,1 ~-~->  (iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State
846 +
847 + AT+SMOD=2,0,2 ~-~->  (WiFi)SSID+Rssi+BAT+State
848 +
849 +
824 824  * (% style="color:blue" %)**Downlink Payload (prefix 0xA5):**
825 825  
826 -(% style="color:#037691" %)**0xA5 01 00 00**    (%%) ~/~/  Same as AT+ SMOD =1,0,0
852 +(% style="color:#037691" %)**0xA5 01 00 00**    (%%) ~/~/  Same as AT+SMOD=1,0,0
827 827  
828 828  
829 829  
... ... @@ -882,14 +882,14 @@
882 882  
883 883  **~ Example:**
884 884  
885 - AT+ CFM=0    **~-~->   ** Disable confirmation
911 + AT+CFM=0    **~-~->   ** Disable confirmation
886 886  
887 - AT+ CFM=1    **~-~->  ** Enable confirmation
913 + AT+CFM=1    **~-~->  ** Enable confirmation
888 888  
889 889  
890 890  * (% style="color:blue" %)**Downlink Payload (prefix 0x05):**
891 891  
892 -(% style="color:#037691" %)**0x05 01 **(%%) ~/~/  Same as AT+ SMOD =1
918 +(% style="color:#037691" %)**0x05 01 **(%%) ~/~/  Same as AT+CFM=1
893 893  
894 894  
895 895  
... ... @@ -914,6 +914,73 @@
914 914  Example: 0x3401  ~/~/  Same as AT+PNACKMD=1
915 915  
916 916  
943 +
944 +=== 3.2.11  Set BLEMASK to filter BLE iBeacon ===
945 +
946 +
947 +BLEMASK is to filter the unwanted BLE iBeacons during scan. For example, if BLEMASK is 123456. TrackerD will only uplink UUID info which includes 123456. It will ignore all other iBeacons which doesn’t contact 123456 in the UUID.
948 +
949 +(% style="color:red" %)**Note: BLEMASK range is 6 ~~ 10 bytes. If AT+BLEMASK < 6 bytes, BLEMASK will be disabled.**
950 +
951 +(% style="color:blue" %)**AT Command:**
952 +
953 + (% style="color:#037691" %)**AT+BLEMASK=123456**   (%%) ~/~/ Set BLEMASK = 123456
954 +
955 + (% style="color:#037691" %)**AT+BLEMASK=0**  (%%) ~/~/ disable BLEMASK
956 +
957 +(% style="color:blue" %)**Downlink Payload: (Prefix : 0xB2)(Since firmware 1.4.1）**
958 +
959 +Example: 0xB2010203040506    ~/~/ Set BLEMASK to 123456
960 +
961 +
962 +
963 +=== 3.2.12  Set WiFIMASK to filter WiFi SSID（Since firmware 1.4.1） ===
964 +
965 +
966 +WiFiMASK is to filter the unwanted WiFi SSID during scan. For example, if WiFiMASK is 123456. TrackerD will only uplink SSID info which includes 123456 as prefix. It will ignore all other WiFi which doesn’t contact 123456 in the SSID.
967 +
968 +(% style="color:red" %)**Note: WiFiMASK range is 6 ~~ 10 bytes. If AT+ WiFiMASK < 6 bytes, WiFiMASK will be disabled.**
969 +
970 +(% style="color:blue" %)**AT Command:**
971 +
972 + (% style="color:#037691" %)**AT+WiFiMASK=123456**    (%%) ~/~/ Set WiFiMASK = 123456
973 +
974 + (% style="color:#037691" %)**AT+WiFiMASK=0**       (%%) ~/~/ disable WiFiMASK
975 +
976 +(% style="color:blue" %)**Downlink Payload: (Prefix : 0xB3)(Since firmware 1.4.1）**
977 +
978 +Example: 0xB3010203040506    ~/~/ Set WiFiMASK to 123456
979 +
980 +
981 +
982 +=== 3.2.13 Disable/Enable Information printing（Since firmware 1.4.1） ===
983 +
984 +
985 +Users can use this feature to enable/disable Information printing.
986 +
987 +(% style="color:blue" %)**AT Command:**
988 +
989 +(% style="color:#037691" %)**AT+SHOWID=XX         **(%%) ~/~/(Disable (0), Enable (1), default:0)
990 +\\Example: AT+SHOWID=1 ~-~-> Enable Information printing.
991 +
992 +
993 +
994 +=== 3.2.14 Get or Set Eight Channels Mode, only for us915, AU915（Since firmware 1.4.1） ===
995 +
996 +
997 +The Channels Mode in the LORAWAN LMIC library is from 0 ~~ 7. When CHE = 8, 72 channels will be accessible to the network.
998 +
999 +(% style="color:blue" %)**AT Command:**
1000 +
1001 +(% style="color:#037691" %)**AT+CHE=1**(%%) ~/~/ set one channels mode
1002 +
1003 +
1004 +(% style="color:blue" %)**Downlink Payload:0X24**(%%)
1005 +
1006 +Example: 0x24 01 ~/~/ Same as AT+CHE=1
1007 +
1008 +
1009 +
917 917  = 4. Setting for Different Scenarios =
918 918  
919 919  
... ... @@ -954,6 +954,7 @@
954 954  [[image:1664503574618-659.png]]
955 955  
956 956  
1050 +
957 957  (% style="color:blue" %)**Step5:** (%%) Select the firmware file (.bin format), com port and proper SPI configure. Clink Start. Bin file location:
958 958  
959 959  [[https:~~/~~/github.com/dragino/TrackerD/releases>>https://github.com/dragino/TrackerD/releases]]
... ... @@ -999,7 +999,18 @@
999 999  [[image:1664503715811-892.png]]
1000 1000  
1001 1001  
1096 +(% id="cke_bm_4554S" style="display:none" %) (%%)Find the path of SP32 installation, find the file as shown in Figure 1, and change the SPI pin to the shown in Figure 2.
1002 1002  
1098 +[[image:image-20221024105643-1.png]]
1099 +
1100 +**~ Figure1**
1101 +
1102 +
1103 +[[image:image-20221024105643-2.png]]
1104 +
1105 + **Figure2**
1106 +
1107 +
1003 1003  * **Download the latest TrackerD from the dragino github: [[https:~~/~~/github.com/dragino/TrackerD>>url:https://github.com/dragino/TrackerD]]**
1004 1004  
1005 1005  Put the Library in the TrackerD directory into the libraries file in the Arduino directory:
... ... @@ -1058,12 +1058,75 @@
1058 1058  |(% style="width:118px" %)A8|(% style="width:67px" %)Yellow|(% style="width:123px" %)MTMS/GPIO14
1059 1059  |(% style="width:118px" %)B8|(% style="width:67px" %)Grey|(% style="width:123px" %)MTDO/GPIO15
1060 1060  
1166 +== 7.3 Notes on using different serial port tools for TrackerD ==
1061 1061  
1062 1062  
1169 +=== **Serial port utility** ===
1063 1063  
1064 -= 8.  Order Info =
1065 1065  
1172 +Serial port utility requires you to automatically add data streams.
1066 1066  
1174 +Need to adjust the data stream to RTS/CTS on physical restart.
1175 +
1176 +
1177 +(% class="wikigeneratedid" %)
1178 +[[image:image-20221102140621-1.png]]
1179 +
1180 +
1181 +When using AT commands, the data flow needs to be adjusted to XON/XOFF
1182 +
1183 +
1184 +[[image:image-20221102140638-2.png]]
1185 +
1186 +
1187 +
1188 +=== **SecureCRT** ===
1189 +
1190 +
1191 +The default command window of SecureCRT is not displayed. Entering a command requires a complete input of the entire command. You can open the command window in the view.
1192 +
1193 +
1194 +[[image:image-20221102140704-3.png]]
1195 +
1196 +
1197 +[[image:image-20221102140712-4.png]]
1198 +
1199 +
1200 +
1201 +=== **PUTTY** ===
1202 +
1203 +
1204 +[[image:image-20221102140748-5.png]]
1205 +
1206 +
1207 +Since putty does not have a command window, you need to fill in the complete command externally, and then copy it to putty.The information copied outside can be pasted by right-clicking the mouse in putty.
1208 +
1209 +
1210 +[[image:image-20221102140801-6.png]]
1211 +
1212 +
1213 += 8  Trouble Shooting =
1214 +
1215 +== 8.1 TDC is changed to 4294947296 and cause no uplink. ==
1216 +
1217 +Before firmware v1.4.0: When the Transport Mode is enabled (**AT+INTWK=1**), the **TDC** needs to be greater than **MTDC**, otherwise, TDC setting will because 4294947296 after wakre up from motion. This bug is fixed in firmware v1.4.1
1218 +
1219 +
1220 +== 8.2 Device not able get AT Command or show output after wake up from deep sleep mode ==
1221 +
1222 +ESP32 is not able to accept the Interrupt from UART after wake up from deep sleep mode. User need to press the button (one click) and trackerD will be able to accept UART command, it there is no action in UART for 15 seconds. it will go to deep sleep mode.
1223 +
1224 +
1225 +== 8.3 The reason why it has been restarted after upgrading（V.1.4.1） ==
1226 +
1227 +If it is V1.4.0 and the previous version, new partitions need to be loaded when upgrading. The new version of the software is stored in the partition package. The upgrade method is shown in the figure
1228 +
1229 +[[image:image-20221107145243-1.png||height="695" width="443"]]
1230 +
1231 +
1232 += 9.  Order Info =
1233 +
1234 +
1067 1067  Part Number: (% style="color:blue" %)**TrackerD-XXX**
1068 1068  
1069 1069  (% style="color:blue" %)**XXX**(%%): The default frequency band
... ... @@ -1076,11 +1076,9 @@
1076 1076  * (% style="color:red" %)**AU915**(%%): Default frequency band AU915
1077 1077  * (% style="color:red" %)**US915**(%%): Default frequency band US915
1078 1078  
1247 += 10.  Packing Info =
1079 1079  
1080 1080  
1081 -= 9.  Packing Info =
1082 -
1083 -
1084 1084  (% style="color:#037691" %)**Package Includes**:
1085 1085  
1086 1086  * TrackerD LoRaWAN GPS/BLE Tracker x 1
... ... @@ -1088,22 +1088,18 @@
1088 1088  
1089 1089  (% style="color:#037691" %)**Dimensions and Weight**:
1090 1090  
1091 -* Device Size: 85 x 48 x 15 cm
1257 +* Device Size: 85 x 48 x 15 mm
1092 1092  * Weight: 50g
1093 1093  
1260 += 11. Support =
1094 1094  
1095 1095  
1096 -= 10. Support =
1097 -
1098 -
1099 1099  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
1100 1100  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]].
1101 1101  
1266 += 12.  Reference =
1102 1102  
1103 1103  
1104 -= 11.  Reference =
1105 -
1106 -
1107 1107  * [[**Firmware in Bin format**>>https://www.dropbox.com/sh/733s8xlwahhqg1d/AABxDz80lBVX_to8zNuUQWFja?dl=0]]
1108 1108  * **[[Source Code>>https://github.com/dragino/TrackerD]] **
1109 1109  * [[**Hardware Source**>>https://www.dropbox.com/sh/orwoy6cecb89m4e/AAD37sRuUrvKsHgAJxuVTkB5a?dl=0]]
1667288597595-714.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +27.9 KB
Content
image-20221024105643-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +11.3 KB
Content
image-20221024105643-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +64.5 KB
Content
image-20221102140621-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +46.1 KB
Content
image-20221102140638-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +40.8 KB
Content
image-20221102140704-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +15.5 KB
Content
image-20221102140712-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +73.2 KB
Content
image-20221102140748-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +56.0 KB
Content
image-20221102140801-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +21.0 KB
Content
image-20221107145243-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +107.3 KB
Content