Skip to Content
Last modified by Xiaoling on 2025/04/27 16:48
From version 78.3
edited by Xiaoling
on 2022/10/14 08:53
Change comment: There is no comment for this version
To version 51.29
edited by Xiaoling
on 2022/09/30 15:58
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -61,11 +61,13 @@
61 61  * EEPROM: 520 KB
62 62  * Clock Speed: 32Mhz
63 63  
64 +
64 64  (% style="color:blue" %)**Common DC Characteristics:**
65 65  
66 66  * Supply Voltage: 5V via USB port or Internal li-on battery
67 67  * Operating Temperature: -40 ~~ 60°C
68 68  
70 +
69 69  (% style="color:blue" %)**LoRa Spec:**
70 70  
71 71  * Frequency Range,
... ... @@ -87,10 +87,12 @@
87 87  * Packet engine up to 256 bytes with CRC.
88 88  * LoRaWAN 1.0.3 Specification
89 89  
92 +
90 90  (% style="color:blue" %)**Battery:**
91 91  
92 92  * 1000mA Li-on Battery power (for model TrackerD)
93 93  
97 +
94 94  (% style="color:blue" %)**Power Consumption**
95 95  
96 96  * Sleeping Mode: 200uA
... ... @@ -97,6 +97,8 @@
97 97  * LoRa Transmit Mode: 125mA @ 20dBm 44mA @ 14dBm
98 98  * Tracking: max: 38mA
99 99  
104 +
105 +
100 100  == 1.3  Features ==
101 101  
102 102  
... ... @@ -103,7 +103,7 @@
103 103  * LoRaWAN 1.0.3 Class A
104 104  * ESP32 PICO D4
105 105  * SX1276/78 Wireless Chip
106 -* Arduino IDE Compatible
112 +** Arduino IDE Compatible
107 107  * Open source hardware / software
108 108  * Regular/ Real-time GPS,BLE,WIFI tracking
109 109  * Built-in3 axis accelerometer (LIS3DH)
... ... @@ -115,6 +115,8 @@
115 115  * Tri-color LED, Alarm button
116 116  * Datalog
117 117  
124 +
125 +
118 118  == 1.4  Applications ==
119 119  
120 120  
... ... @@ -121,6 +121,8 @@
121 121  * Logistics and Supply Chain Management
122 122  * Human tracking
123 123  
132 +
133 +
124 124  = 2.1 Use TrackerD =
125 125  
126 126  
... ... @@ -183,131 +183,42 @@
183 183  (% style="color:blue" %)**Step 3:**(%%) TrackerD will auto join to the LoRaWAN network. After join success, TrackerD will start to upload message to IoT server.
184 184  
185 185  
196 +(% style="color:blue" %)**Positioning Mode(SMOD):**
186 186  
187 -== 2.3  Positioning Mode(SMOD) ==
198 +* (% style="color:#037691" %)**GPS ONLY(Factory Settings):    **(%%)only get GPS location info.
199 +* (% style="color:#037691" %)**BLE ONLY:              **(%%)Only obtain iBeacon info via BLE. Design for Indoor tracking.
200 +* (% style="color:#037691" %)**GPS/BLE Hybrid:   **(%%)Combination for Indoor and Outdoor tracking.
188 188  
202 +User can switch modes by [[changing SMOD>>||anchor="H3.2.7SetPositioningMode"]].
189 189  
190 -Users can set TrackerD to different Positioning Mode for different applications. Below mod are supported.
191 191  
192 -* (% style="color:#037691" %)**GPS ONLY(Factory Settings):    **(%%)only get and uplink GPS location info.
193 -* (% style="color:#037691" %)**BLE ONLY:              **(%%)Only obtain iBeacon info via BLE and uplink. Design for Indoor tracking.
194 -* (% style="color:#037691" %)**GPS/BLE Hybrid:   **(%%)Combination for Indoor and Outdoor tracking.Devices will try to search BLE iBeacon first. If device can't find the iBeacon, it will use GPS for positioning.
195 195  
196 -Users can switch modes by [[changing SMOD>>||anchor="H3.2.7SetPositioningMode"]].
206 +== 2.3 Uplink Payload ==
197 197  
198 198  
209 +=== 2.3.1 Uplink FPORT~=5, Device Status ===
199 199  
200 -== 2.4  Uplink Payload ==
201 201  
202 202  
203 -=== 2.4.1 Uplink FPORT~=5, Device Status ===
213 +=== 2.3.2 Uplink FPORT~= , Realtime GNSS Positioning ===
204 204  
205 205  
206 -Uplink the device configures with FPORT=5. Once TrackerD Joined the network, it will uplink this message to the server. After the first uplink, TrackerD will uplink Device Status every 12 hours.
216 +The default uplink payload includes totally 11 bytes. (User can use AT+MOD=0 to enable the Temperature and humidity sensor to hum/tem info from accelerometer. When accelerometer info is enable, total payload will be 15 bytes, please note 15 bytes won't work on DR0 on US915/AU915 frequency band. )
207 207  
208 -Use can also get the Device Status uplink through the downlink command: **Downlink:  0x2301**
209 209  
210 -
211 -(% border="1.5" style="background-color:#ffffcc; color:green; width:520px" %)
212 -|=(% scope="row" style="width: 108px;" %)**Size(bytes)**|=(% style="width: 82px;" %)**1**|=(% style="width: 83px;" %)**2**|=(% style="width: 94px;" %)**1**|=(% style="width: 84px;" %)**1**|=(% style="width: 44px;" %)2|=(% style="width: 63px;" %)**2**|=(% style="width: 60px;" %)1
213 -|=(% style="width: 108px;" %)**Value**|(% style="width:82px" %)Sensor Model|(% style="width:83px" %)Firmware Version|(% style="width:94px" %)Frequency Band|(% style="width:84px" %)Sub-band|(% style="width:44px" %)BAT|(% style="width:63px" %)SMOD|(% style="width:60px" %)Status
214 -
215 -[[image:1665301570342-765.png]]
216 -
217 -
218 -(% style="color:#037691" %)**Example of Device Status:**(%%) 13014001FF0FA24002
219 -
220 -(% style="color:#037691" %)**Sensor Model:** (%%) For TrackerD,this value is 0x13
221 -
222 -(% style="color:#037691" %)**Firmware Version: **(%%) 0x0140,Means:v1.4.0 version
223 -
224 -(% style="color:#037691" %)**Frequency Band**:
225 -
226 -*0x01: EU868
227 -
228 -*0x02: US915
229 -
230 -*0x03: IN865
231 -
232 -*0x04: AU915
233 -
234 -*0x05: KZ865
235 -
236 -*0x06: RU864
237 -
238 -*0x07: AS923
239 -
240 -*0x08: AS923-1
241 -
242 -*0x09: AS923-2
243 -
244 -*0x0a: AS923-3
245 -
246 -Sub- Band:value 0x00~~0x08(only forAU915,US915,Others are 0xFF)
247 -
248 -(% style="color:#037691" %)**BAT:**(%%) shows the battery voltage for TrackerD.
249 -
250 -
251 -(% style="color:#037691" %)**Ex1:**(%%) 0x0FA2 = 4002mV
252 -
253 -Use can also get the Device Status uplink through the downlink command:
254 -
255 -
256 -
257 -(% style="color:#037691" %)**SMOD Field (total 1 byte)**(%%)：0x40
258 -
259 -(% border="1.5" style="background-color:#ffffcc; color:green; width:420px" %)
260 -|(% style="width:75px" %)**Size(bit)**|(% style="width:64px" %)2bits|(% style="width:137px" %)2bit|(% style="width:142px" %)4bit
261 -|(% style="width:75px" %)**Value**|(% style="width:64px" %)SMOD|(% style="width:137px" %)GPS_Settings|(% style="width:142px" %)BLE_Settings
262 -
263 -(% style="color:blue" %)** SMOD：**
264 -
265 -(% style="color:red" %)** 1 :** (%%) GPS ONLY
266 -
267 -(% style="color:red" %)** 2 :** (%%) BLE ONLY
268 -
269 -(% style="color:red" %)** 3 :**  (%%) GPS/BLE Hybrid
270 -
271 -
272 -(% style="color:blue" %)** GPS_MOD: Define how to send GPS payload**
273 -
274 -(% style="color:red" %)** 0 : ** (%%) Enable uploading on-board Temperature and humidity values
275 -
276 -(% style="color:red" %)** 1 :** (%%) Disable uploading on-board Temperature and humidity values
277 -
278 -
279 -(% style="color:blue" %)** BLE_Settings:**
280 -
281 -(% style="color:red" %)** 1: ** (%%) BLE Positioning with Strongest iBeacon
282 -
283 -
284 -
285 -(% style="color:#037691" %)**Status Field (total 1 byte)**(%%):  0x02
286 -
287 -(% border="1.5" style="background-color:#ffffcc; color:green; width:417px" %)
288 -|(% style="width:77px" %)**Size(bit)**|(% style="width:70px" %)5 Bits|(% style="width:92px" %)1 Bit|(% style="width:48px" %)1 Bit|(% style="width:126px" %)1 Bit
289 -|(% style="width:77px" %)**Value**|(% style="width:70px" %)Reserve|(% style="width:92px" %)[[PNACKMD>>||anchor="H2.4.4A0UplinkFPORT3D42CHistoryGNSSPositioning"]]|(% style="width:48px" %)[[LON>>||anchor="H3.2.5Disable2FEnableLEDflash"]]|(% style="width:126px" %)[[Transport Mode>>||anchor="H2.9TransportMode"]]
290 -
291 -
292 -=== 2.4.2 Uplink FPORT~=2, Realtime GNSS Positioning + Temperature & Humidity ===
293 -
294 -
295 -Users can use **AT+SMOD=1,0,0** to enable uploading on-board Temperature and humidity values, and the total payload will be 15 bytes,
296 -
297 -
298 298  (% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:480px" %)
299 299  |=(% scope="row" style="width: 50px;" %)(((
300 300  **Size(bytes)**
301 -)))|(% style="width:60px" %)4|(% style="width:70px" %)4|(% style="width:80px" %)2|(% style="width:73px" %)1|(% style="width:40px" %)(((
302 -2
222 +)))|(% style="width:60px" %)4|(% style="width:70px" %)4|(% style="width:80px" %)2|(% style="width:50px" %)1|(% style="width:88px" %)(((
223 +2(optional)
303 303  )))|(% style="width:87px" %)(((
304 -2
225 +2(optional)
305 305  )))
306 306  |=(% style="width: 69px;" %)**Value**|(% style="width:76px" %)[[Latitude>>||anchor="HLocationinfo:"]]|(% style="width:87px" %)[[Longitude>>||anchor="HLocationinfo:"]]|(% style="width:76px" %)(((
307 307  [[Alarm & BAT>>||anchor="HAlarm26BAT:"]]
308 -)))|(% style="width:73px" %)[[FLAG>>||anchor="HFLAG:"]]|(% style="width:40px" %)[[Hum>>||anchor="HHum:"]]|(% style="width:87px" %)[[Tem>>||anchor="HTem:"]]
229 +)))|(% style="width:52px" %)[[FLAG>>||anchor="HFLAG:"]]|(% style="width:88px" %)[[Hum>>||anchor="HHum:"]]|(% style="width:87px" %)[[Tem>>||anchor="HTem:"]]
309 309  
310 -[[image:1665301636888-168.png]]
231 +[[image:1664501958445-288.png]]
311 311  
312 312  
313 313  ==== (% style="color:blue" %)**Alarm & BAT:**(%%) ====
... ... @@ -316,11 +316,12 @@
316 316  |=(% scope="row" style="width: 50px;" %)**Size(bit)**|(% style="width:50px" %)1 bit|(% style="width:80px" %)1bit|(% style="width:50px" %)14bits
317 317  |=(% style="width: 72px;" %)**Value**|(% style="width:67px" %)reserve|(% style="width:118px" %)Alarm Indicate|(% style="width:63px" %)[[BAT>>||anchor="HBAT:"]] 
318 318  
240 +
319 319  ==== (% style="color:blue" %)**FLAG:**(%%) ====
320 320  
321 321  (% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:250px" %)
322 -|=(% scope="row" style="width: 50px;" %)**Size(bit)**|(% style="width:50px" %)2bits|(% style="width:50px" %)1bit
323 -|=(% style="width: 79px;" %)**Value**|(% style="width:55px" %)[[MOD>>||anchor="H3.2.7SetPositioningMode"]]|(% style="width:47px" %)[[LON>>||anchor="HLON:"]]
244 +|=(% scope="row" style="width: 50px;" %)**Size(bit)**|(% style="width:50px" %)2bits|(% style="width:50px" %)1bit|(% style="width:100px" %)5 bits
245 +|=(% style="width: 79px;" %)**Value**|(% style="width:55px" %)[[MOD>>||anchor="H3.2.7SetPositioningMode"]]|(% style="width:47px" %)[[LON>>||anchor="HLON:"]]|(% style="width:140px" %)Firmware version 
324 324  
325 325  **Example:** Payload: 0x02863D68 FAC29BAF 4B45 60 0202 011A 
326 326  
... ... @@ -330,18 +330,23 @@
330 330  * Latitude: 02863D68  ⇒  //if (0x//02863D68//& 0x80000000 = 0 )~://  //value = 02863D68 /1000000 = 42.351976//
331 331  * Longitude: FAC29BAF  ⇒ //if (0x//FAC29BAF// & 0x80000000 = 1 )~://  //value = (0x//FAC29BAF// – 0x 100000000)/1000000 =//-87.9094//57//
332 332  
255 +
256 +
333 333  (% style="color:red" %)**Important note:**
334 334  
335 335  1.  When power is low (<2.84v), GPS won't be able to get location info and GPS feature will be disabled and the location field will be filled with 0x0FFFFFFF, 0x0FFFFFFF.
336 336  
337 -2.  In this mode, the total payload will be 15 bytes, while US915/AU915 DR0 accepts only 11 bytes payload. In this case, the payload on server will be ignore and shows as below:
261 +2.  In firmware version v1.5, Roll & Pitch is disabled by default.
338 338  
263 +3.  When enable 9-axis motion sensor, the total payload will be 15 bytes, while US915/AU915 DR0 accept only 11 bytes payload. In this case, the payload on server will be ignore and shows as below:
339 339  
265 +
340 340  [[image:1664502116362-706.png]]
341 341  
342 342  
343 -3.  While GPS can't get location info after timeout(FTIME Parameter), the latitude and longitude will be filled with all 0x00:
344 344  
270 +4.  While GPS can't get location info after timeout(FTIME Parameter), the latitude and longitude will be filled with all 0x00:
271 +
345 345  [[image:1664502166010-515.png]]
346 346  
347 347  
... ... @@ -348,17 +348,18 @@
348 348  
349 349  ==== (% style="color:blue" %)**Alarm:**(%%) ====
350 350  
351 -**Example: ** 0x4B & 0x40 >> 6 = 0x01
278 +Example:  0x4B & 0x40 >> 6 = 0x01
352 352  
353 353  
354 354  ==== (% style="color:blue" %)**BAT:**(%%) ====
355 355  
356 -**Example: ** 0x4B45 & 0x3FFF ⇒ 2885 (mV).
283 +Example:  0x0CDD & 0x3FFF ⇒ 3293 (mV).
357 357  
358 358  (((
359 -The battery info shows the battery voltage, User can use the below mapping to indicate the battery in percentage: \
286 +The battery info shows the current voltage, for (% style="color:blue" %)**TrackerD**(%%) version which powered by li-on battery. User can use below mapping to indicate the battery in percentage: \
360 360  )))
361 361  
289 +
362 362  * > 4.0v :  80% ~~ 100%
363 363  * 3.85v ~~3.99v:  60% ~~ 80%
364 364  * 3.70v ~~ 3.84v:  40% ~~ 60%
... ... @@ -365,37 +365,21 @@
365 365  * 3.40v ~~ 3.69v:  20% ~~ 40%
366 366  * < 3.39v:  0~~20%
367 367  
368 -==== (% style="color:blue" %)**MOD:**(%%) ====
369 369  
370 -**Example: ** (0x60>>6)& 0x3f =1.
371 -
372 -**Set the format of GPS data uplink link：**
373 -
374 -(% style="color:#037691" %)**0x00:** (%%) Enable uploading on-board Temperature and humidity values
375 -(% style="color:#037691" %)**0x01: ** (%%) Disable uploading on-board Temperature and humidity values
376 -
377 -
378 -**Set the format of BLE data uplink link：**
379 -
380 -(% style="color:#037691" %)**0x01: ** (%%) BLE Positioning with Strongest iBeacon
381 -
382 -
383 383  ==== (% style="color:blue" %)**LON:**(%%) ====
384 384  
385 -**Example:** (0x60>>5) & 0x01=1.
386 -
299 +
387 387  Enable/Disable LED activity for uplink
388 388  
389 389  (((
390 -(% style="color:#037691" %)**0x00:**  (%%) Disable LED indicator.
303 +0x00:  Disable LED indicator.
391 391  )))
392 392  
393 393  (((
394 -(% style="color:#037691" %)**0x01:**  (%%) Enable LED indicator (Default Value)
307 +0x01:  Enable LED indicator (Default Value)
395 395  )))
396 396  
397 397  
398 -
399 399  ==== (% style="color:blue" %)**Hum:**(%%) ====
400 400  
401 401  0202 = //if (0x0202 & 0x8000 = 0 ):  value =// 0x0202 / 100 = +514 ⇒ 51.4 degree
... ... @@ -407,52 +407,15 @@
407 407  
408 408  
409 409  
410 -=== 2.4.3  Uplink FPORT~=3, Realtime GNSS Positioning (Default Mode) ===
322 +=== 2.3.3 Uplink FPORT~= , History GNSS Positioning ===
411 411  
412 412  
413 -The default uplink payload includes total 11 bytes (**AT+SMOD=1,1,0**). The payload is the first 11 bytes of Uplink FPORT=2, real-time GNSS positioning, (remove the temp and humidity)
414 414  
326 +=== 2.3.4 BLE positioning Payload(Fport2) ===
415 415  
416 -(% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:480px" %)
417 -|=(% scope="row" style="width: 50px;" %)(((
418 -**Size(bytes)**
419 -)))|(% style="width:60px" %)4|(% style="width:70px" %)4|(% style="width:80px" %)2|(% style="width:73px" %)1
420 -|=(% style="width: 69px;" %)**Value**|(% style="width:76px" %)[[Latitude>>||anchor="HLocationinfo:"]]|(% style="width:87px" %)[[Longitude>>||anchor="HLocationinfo:"]]|(% style="width:76px" %)(((
421 -[[Alarm & BAT>>||anchor="HAlarm26BAT:"]]
422 -)))|(% style="width:73px" %)[[FLAG>>||anchor="HFLAG:"]]
423 423  
424 -(% class="wikigeneratedid" %)
425 -[[image:1665301687277-443.png]]
329 +Different MODE has different payload:  (% style="color:blue" %)**MODE=2**
426 426  
427 -
428 -
429 -=== 2.4.4  Uplink FPORT~=4, History GNSS Positioning ===
430 -
431 -
432 -Set [[PNACKMD=1>>||anchor="H3.2.10A0A0AutoSendNone-ACKmessages"]], and TrackerD will wait for ACK for every uplink, when there is no LoRaWAN network, TrackerD will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
433 -
434 -
435 -(% style="color:red" %)**Note for this mode:**
436 -
437 -* a) TrackerD will do an ACK check for data records sending to make sure every data arrive server.
438 -* b) TrackerD will send data in (% style="color:blue" %)**CONFIRMED Mode**(%%) when PNACKMD=1, but TrackerD won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink, if TrackerD gets an ACK, TrackerD will consider there is a network connection and resend all NONE-ACK Messages.
439 -* c) the total payload will be 15 bytes, while US915/AU915 DR0 accepts only 11 bytes of payload. In this case (DR0 of US915/AU915), the payload on server will show NULL
440 -
441 -The payload is 15 bytes, as below.
442 -
443 -(% border="1.5" style="background-color:#ffffcc; color:green; width:520px" %)
444 -|=(% scope="row" %)(((
445 -**Size(bytes)**
446 -)))|4|4|2|1|1|1|1|1
447 -|=**Value**|Latitude|Longitude|Year|Month|Day|Hous|Min|Sen
448 -
449 -[[image:image-20221009160309-2.png]]
450 -
451 -
452 -
453 -=== 2.4.5  Uplink FPORT~=6, BLE Positioning with Strongest iBeacon ===
454 -
455 -
456 456  (% border="1.5" cellspacing="3" style="background-color:#ffffcc; color:green; width:450px" %)
457 457  |=(% scope="row" style="width: 60px;" %)(((
458 458  **Size(bytes)**
... ... @@ -469,6 +469,7 @@
469 469  [[Alarm & BAT>>||anchor="HAlarm26BAT:"]]
470 470  )))|(% style="width:15px" %)[[FLAG>>||anchor="HFLAG:"]]
471 471  
347 +
472 472  [[image:1664502425687-834.png]]
473 473  
474 474  
... ... @@ -482,7 +482,7 @@
482 482  
483 483  
484 484  
485 -=== 2.4.6  Add Payload format in TTN V3 ===
361 +=== 2.3.5 Add Payload format in TTN V3 ===
486 486  
487 487  
488 488  In TTN V3, use can add a custom payload so it shows friendly.
... ... @@ -502,7 +502,7 @@
502 502  
503 503  
504 504  
505 -== 2.5 Integrate with Datacake ==
381 +== 2.4 Integrate with Datacake ==
506 506  
507 507  
508 508  (((
... ... @@ -518,7 +518,7 @@
518 518  
519 519  
520 520  
521 -== 2.6 Integrate with Tago ==
397 +== 2.5 Integrate with Tago ==
522 522  
523 523  
524 524  (((
... ... @@ -534,25 +534,9 @@
534 534  
535 535  
536 536  
537 -== 2.7  Datalog Feature ==
413 +== 2.6 Alarm Mode ==
538 538  
539 539  
540 -total 273 entries,by default,
541 -
542 -User can set [[PNACKMD=1>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H4.13AutoSendNone-ACKmessages]], to enable Datalog feature.
543 -
544 -Example use case.
545 -
546 -[[image:image-20221009234703-2.png||height="328" width="899"]]
547 -
548 -
549 -[[image:image-20221009234629-1.png||height="390" width="577"]]
550 -
551 -
552 -
553 -== 2.8 Alarm Mode ==
554 -
555 -
556 556  (((
557 557  User can push the (% style="color:red" %)**RED button**(%%) by more than 5 seconds to enter Alarm Mode.
558 558  )))
... ... @@ -570,6 +570,7 @@
570 570  * Server send a downlink command to exit.
571 571  * User fast press the RED button 10 times.
572 572  
433 +
573 573  (((
574 574  When exit alarm mode, (% style="color:red" %)**RED LED**(%%) will light up for 5 seconds, indicating that the alarm mode is exited. And the alert flag will be set to false.
575 575  )))
... ... @@ -576,16 +576,13 @@
576 576  
577 577  
578 578  
579 -== 2.9 Transport Mode ==
440 +== 2.7 Sports Mode ==
580 580  
581 581  
582 -In Transport Mode, TrackerD will check if there is motion. If there is no motion, device will send uplinks every 20 minutes. If there is motion, device will send uplink every 5 minutes.
583 583  
444 +== 2.8 LED Status ==
584 584  
585 585  
586 -== 2.10 LED Status ==
587 -
588 -
589 589  (% border="1.5" style="background-color:#ffffcc; color:green; width:500px" %)
590 590  |=(% style="width: 150px;" %)**Event**|=(% style="width: 200px;" %)**Action**|=(% style="width: 150px;" %)**AT+LON to control on/off**
591 591  |(% style="width:157px" %)**Power On**|(% style="width:271px" %)(% style="color:blue" %)**BLUE, **(% style="color:red" %)**RED , **(% style="color:green" %)**Green** flash once|(% style="width:202px" %)N/A
... ... @@ -600,9 +600,11 @@
600 600  |(% style="width:157px" %)**Get Downlink**|(% style="width:271px" %)(% style="color:green" %)**GREEN**(%%) led on 1 second|(% style="width:202px" %)Yes
601 601  |(% style="width:157px" %)**Movement Detect**|(% style="width:271px" %)(% style="color:red" %)**RED **(%%)led on 500ms|(% style="width:202px" %)N/A
602 602  
603 -== 2.11 Button Function ==
604 604  
605 605  
463 +== 2.9 Button Function ==
464 +
465 +
606 606  (% style="color:blue" %)**RESET button:**
607 607  
608 608  [[image:1664502835802-546.png]]
... ... @@ -621,9 +621,11 @@
621 621  |(% style="width:135px" %)Exit Alarm Mode|(% style="width:220px" %)Fast press the (% style="color:red" %)**RED** (%%)button 10 times|(% style="width:265px" %)Exit Alarm Mode
622 622  |(% style="width:135px" %)Enter Deep Sleep Mode|(% style="width:220px" %)Press and hold the button for 10 seconds, then quickly press the device 3 times to enter deep sleep|(% style="width:265px" %)This is the mode ship out from factory. CPU will be complete in sleep mode and no LoRa activity, only use before deploy.
623 623  
624 -== 2.12 USB Port Function ==
625 625  
626 626  
486 +== 2.10 USB Port Function ==
487 +
488 +
627 627  The USB interface of TrackerD has below functions:
628 628  
629 629  * Power on the device
... ... @@ -631,6 +631,9 @@
631 631  * [[Configure Device>>||anchor="H3.ConfigureTrackerDviaATcommandorLoRaWANdownlink"]]
632 632  * [[Upgrade Firmware>>||anchor="H5.UploadFirmware"]]
633 633  
496 +
497 +
498 +
634 634  = 3. Configure TrackerD via AT command or LoRaWAN downlink =
635 635  
636 636  
... ... @@ -703,16 +703,16 @@
703 703  
704 704  
705 705  
706 -=== 3.2.3 Set Transport Mode Packet transmission interval ===
571 +=== 3.2.3 Set Sports Mode Packet transmission interval ===
707 707  
708 708  
709 -Set Transport Mode packet transmit interval
574 +Set sports packet transmit interval
710 710  
711 711  * (% style="color:blue" %)**AT Command:**
712 712  
713 713  (% style="color:#037691" %)**AT+MTDC=xx. **
714 714  
715 -Example:  AT+MTDC=300000  **~-~->    ** Set Transport Mode Packet Interval to 300 seconds. TrackerD will send every 300 seconds in Transport mode, Default Value: 300000
580 +Example:  AT+MTDC=300000  **~-~->    ** Set Sports Mode Packet Interval to 300 seconds. TrackerD will send every 300 seconds in Sports mode, Default Value: 300000
716 716  
717 717  
718 718  * (% style="color:blue" %)**Downlink Payload (prefix 0x03):**
... ... @@ -752,16 +752,16 @@
752 752  
753 753  
754 754  
755 -=== 3.2.6 Disable/Enable Transport Mode ===
620 +=== 3.2.6 Disable/Enable movement detect (Debug Only) ===
756 756  
757 757  
758 -Users can use this feature to enable/disable Transport Mode.
623 +User can use this feature to check and set thread hole of movement detect
759 759  
760 760  * (% style="color:blue" %)**AT Command:**
761 761  
762 762  (% style="color:#037691" %)**AT+INTWK=xx.  (Disable (0), Enable (1), default:0)**
763 763  
764 -Example:  AT+ INTWK =1  **~-~->   ** Enable Transport Mode.
629 +Example:  AT+ INTWK =1  **~-~->   ** Enable detect movement.
765 765  
766 766  
767 767  * (% style="color:blue" %)**Downlink Payload (prefix 0xAF):**
... ... @@ -773,38 +773,35 @@
773 773  === 3.2.7 Set Positioning Mode ===
774 774  
775 775  
776 -SMOD define the how TrackerD scan and uplink data:
641 +SMOD define the how TrackerD scan and uplink date.
777 777  
643 +GPS室外定位模式：  设备默认模式，设备入网后会发送device当前模式下的信息，随后立即定位发送数据包（默认是3分钟定位，超过将发送无效数据），如果出现意外情况下，快速按键3下，将会发出报警消息（默认每分钟发送一次）。GPS还有一种logdata模式，在断网的情况下将数据存储下来，等到有网的时候，一次将数据以每10秒上报。
778 778  
779 -* (% style="color:blue" %)**AT Command:**
645 +BLE室内定位模式：  设备入网后会发送device当前模式下的信息，随后立即定位发送数据包（默认是5秒，超过将发送无效数据），如果出现意外情况下，快速按键3下，将会发出报警消息（默认每3分钟发送一次）。
780 780  
781 -(% style="color:#037691" %)**AT+SMOD=aa,bb,cc**
647 +GPS和BLE混动模式：设备入网后会发送device当前模式下的信息，随后立即判断是否在室内，如果是就进行BLE定位，不是就GPS定位。如果出现意外情况下，快速按键3下，将会发出报警消息（默认每分钟发送一次）。
782 782  
783 -(% style="color:#037691" %)** aa:**
649 +运动模式：  设备入网后会发送device当前模式下的信息，随后发送GPS定位数据，设备判断是否在运动，没有运动传感器没有检测到动作，立即进入静止状态（默认20分钟），如果产生运动，将每5分钟发送一次数据，再第五分钟后检测设备有误运动，无将切换到静止状态，有立即发送数据。
784 784  
785 -* (% style="color:red" %)**1: GPS ONLY(Factory Settings):    **(%%)only get and uplink GPS location info.
786 -* (% style="color:red" %)**2: BLE ONLY:              **(%%)Only obtain iBeacon info via BLE and uplink. Design for Indoor tracking.
787 -* (% style="color:red" %)**3: GPS/BLE Hybrid:   **(%%)Combination for Indoor and Outdoor tracking.Devices will try to search BLE iBeacon first. If device can't find the iBeacon, it will use GPS for positioning.
788 788  
789 -(% style="color:#037691" %)**bb:**
790 790  
791 -* (% style="color:red" %)**0 :  **(%%)GPS+ BAT+ State+Tem&Hum
792 -* (% style="color:red" %)**1 :**(%%)  GPS +BAT State
653 +* (% style="color:blue" %)**AT Command:**
793 793  
794 -(% style="color:#037691" %)**cc:   **
655 +(% style="color:#037691" %)**AT+SMOD=xx. **
795 795  
796 -* (% style="color:red" %)**1 : **(%%) (iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State  
797 797  
798 -(% style="color:blue" %)**Example:**
658 + **Example:**
799 799  
800 - AT+ SMOD =1,0 ,0 ~-~->  GPS+ BAT+ State+Tem&Hum
801 - AT+ SMOD =1,1,0 ~-~->  GPS +BAT State
802 - AT+ SMOD =2,0,1 ~-~->  (iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State
660 + AT+ SMOD =1,0  **~-~-> ** GPS+ BAT+ State+Tem&Hum
803 803  
662 + AT+ SMOD =1,1    **~-~->**  GPS +BAT State
804 804  
664 + AT+ SMOD =2,3    **~-~->**  (iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State。
665 +
666 +
805 805  * (% style="color:blue" %)**Downlink Payload (prefix 0xA5):**
806 806  
807 -(% style="color:#037691" %)**0xA5 01 00 00**    (%%) ~/~/  Same as AT+ SMOD =1,0,0
669 +(% style="color:#037691" %)**0xA5 01 00**    (%%) ~/~/  Same as AT+ SMOD =1,0
808 808  
809 809  
810 810  
... ... @@ -821,7 +821,7 @@
821 821  
822 822  (% style="color:#037691" %)**AT+FTIME=xx**  (%%) **~-~-> ** Set to use xx as max fix time.
823 823  
824 -**Example:**  AT+FTIME=150
686 +Example:  AT+FTIME=150
825 825  
826 826  
827 827  * (% style="color:blue" %)**Downlink Payload (prefix 0xAA):**
... ... @@ -830,7 +830,7 @@
830 830  
831 831  
832 832  
833 -=== 3.2.9 Set PDOP value for GPS fix accuracy ===
695 +=== 3.3.9 Set PDOP value for GPS fix accuracy ===
834 834  
835 835  
836 836  PDOP(Position Dilution of Precision) filter, TrackerD will only accept GPS data with a lower PDOP value than pre-configure PDOP value. If device can't get a valid GPS packet within FTIME timeout, it will use the GPS data with lowest PDOP value to server.
... ... @@ -858,7 +858,7 @@
858 858  
859 859  * (% style="color:blue" %)**AT Command:**
860 860  
861 -(% style="color:#037691" %)**AT+CFM=xx**
723 +(% style="color:#037691" %)**AT+CFM=xx. **
862 862  
863 863  
864 864  **~ Example:**
... ... @@ -874,27 +874,6 @@
874 874  
875 875  
876 876  
877 -=== 3.2.10  Auto Send None-ACK messages ===
878 -
879 -
880 -TrackerD will wait for ACK for each uplink, If TrackerD doesn't get ACK from the IoT server, it will consider the message doesn't arrive server and store it. TrackerD keeps sending messages in normal periodically. Once TrackerD gets ACK from a server, it will consider the network is ok and start to send the not-arrive message.
881 -
882 -
883 -* (% style="color:blue" %)**AT Command: AT+PNACKMD**
884 -
885 -The default factory setting is 0.
886 -
887 -
888 -**Command Example Function Response:**
889 -
890 -(% style="color:#037691" %)**AT+PNACKMD=1**  (%%) ~/~/  Poll None-ACK message OK
891 -
892 -
893 -* (% style="color:blue" %)**Downlink Command: 0x34**
894 -
895 -Example: 0x3401  ~/~/  Same as AT+PNACKMD=1
896 -
897 -
898 898  = 4. Setting for Different Scenarios =
899 899  
900 900  
... ... @@ -937,7 +937,7 @@
937 937  
938 938  (% style="color:blue" %)**Step5:** (%%) Select the firmware file (.bin format), com port and proper SPI configure. Clink Start. Bin file location:
939 939  
940 -[[https:~~/~~/github.com/dragino/TrackerD/releases>>https://github.com/dragino/TrackerD/releases]]
781 +[[https:~~/~~/www.dropbox.com/sh/733s8xlwahhqg1d/AABxDz80lBVX_to8zNuUQWFja?dl=0>>url:https://www.dropbox.com/sh/733s8xlwahhqg1d/AABxDz80lBVX_to8zNuUQWFja?dl=0]]
941 941  
942 942  
943 943  Users need to use below files:
... ... @@ -974,7 +974,6 @@
974 974  [[image:1664503635019-941.png]]
975 975  
976 976  
977 -
978 978  * (% style="color:#037691" %)**Go to tools ~-~-> Boards ~-~-> Boards Manager**,(%%) **find the esp32 information and install it.**
979 979  
980 980  [[image:1664503715811-892.png]]
... ... @@ -1039,6 +1039,8 @@
1039 1039  |(% style="width:118px" %)A8|(% style="width:67px" %)Yellow|(% style="width:123px" %)MTMS/GPIO14
1040 1040  |(% style="width:118px" %)B8|(% style="width:67px" %)Grey|(% style="width:123px" %)MTDO/GPIO15
1041 1041  
882 +
883 +
1042 1042  = 8.  Order Info =
1043 1043  
1044 1044  
... ... @@ -1054,19 +1054,25 @@
1054 1054  * (% style="color:red" %)**AU915**(%%): Default frequency band AU915
1055 1055  * (% style="color:red" %)**US915**(%%): Default frequency band US915
1056 1056  
899 +
900 +
901 +
1057 1057  = 9.  Packing Info =
1058 1058  
1059 1059  
1060 -(% style="color:#037691" %)**Package Includes**:
905 +**(% style="color:#037691" %)Package Includes**:
1061 1061  
1062 1062  * TrackerD LoRaWAN GPS/BLE Tracker x 1
1063 1063  * USB recharge & program cable x 1
1064 1064  
1065 -(% style="color:#037691" %)**Dimensions and Weight**:
910 +**(% style="color:#037691" %)Dimensions and Weight**:
1066 1066  
1067 1067  * Device Size: 85 x 48 x 15 cm
1068 1068  * Weight: 50g
1069 1069  
915 +
916 +
917 +
1070 1070  = 10. Support =
1071 1071  
1072 1072  
... ... @@ -1073,6 +1073,9 @@
1073 1073  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
1074 1074  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]].
1075 1075  
924 +
925 +
926 +
1076 1076  = 11.  Reference =
1077 1077  
1078 1078  
... ... @@ -1080,4 +1080,5 @@
1080 1080  * **[[Source Code>>https://github.com/dragino/TrackerD]] **
1081 1081  * [[**Hardware Source**>>https://www.dropbox.com/sh/orwoy6cecb89m4e/AAD37sRuUrvKsHgAJxuVTkB5a?dl=0]]
1082 1082  
934 +
1083 1083  
1665301570342-765.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -31.6 KB
Content
1665301636888-168.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -36.6 KB
Content
1665301687277-443.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -22.6 KB
Content
1665301786397-168.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -22.6 KB
Content
image-20221006181316-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -17.7 KB
Content
image-20221006181357-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -88.0 KB
Content
image-20221009160220-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -46.4 KB
Content
image-20221009160309-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -57.2 KB
Content
image-20221009234629-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -222.9 KB
Content
image-20221009234703-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -136.4 KB
Content